The additional time it takes for the 120 kg body to come to rest after applying a constant force of 75 N for 7 seconds and then an opposite force of 55 N is approximately 26.248 seconds. The time it takes for the 250 N block to reach a velocity of 10 m/s, given a horizontal force of 60 N and a coefficient of friction of 0.15, is given by t = m / (10 m/s - 0.15 * mg), where t is the time in seconds.
To find the additional time in seconds for the body to come to rest, we need to consider the net force acting on the body. Initially, the net force is 75 N, and the mass is 120 kg.
We can use Newton's second law (F = ma) to calculate the acceleration: a = F/m = 75 N / 120 kg = 0.625 m/s². During the 7 seconds, the body experiences a change in velocity of (0.625 m/s²) * (7 s) = 4.375 m/s. Now, an opposite force of 55 N is applied, resulting in a net force of 75 N - 55 N = 20 N. To bring the body to rest, the net force needs to counteract the initial velocity. Using F = ma, we have 20 N = 120 kg * a, which gives us a = 20 N / 120 kg = 0.1667 m/s².
Now we can find the additional time using the equation Δv = at, where Δv is the change in velocity (4.375 m/s), and a is the acceleration (-0.1667 m/s²). Rearranging the equation, we get t = Δv / a = 4.375 m/s / 0.1667 m/s² ≈ 26.248 seconds.
To find the time it takes for the block to reach a velocity of 10 m/s, we need to consider the forces acting on it. The horizontal force applied is 60 N, and the coefficient of friction is 0.15. The frictional force can be calculated using the equation F_friction = μN, where μ is the coefficient of friction and N is the normal force. The normal force is equal to the weight of the block, which is given by N = mg, where m is the mass of the block.
Assuming the acceleration is constant during this process, we can use the equation v = u + at, where v is the final velocity, u is the initial velocity (0 m/s), a is the acceleration, and t is the time. The frictional force opposes the motion, so we have 60 N - F_friction = ma. Substituting F_friction = μN and N = mg, we get 60 N - 0.15 * mg = ma.
Rearranging the equation, we have a = (60 N - 0.15 * mg) / m. We also know that a = (v - u) / t. Substituting the values, we get (10 m/s - 0 m/s) / t = (60 N - 0.15 * mg) / m. Solving for t, we have t = m / (10 m/s - 0.15 * mg).
To know more about constant force refer to-
https://brainly.com/question/29598403
#SPJ11
candle (h, - 0.24 m) is placed to the left of a diverging lens (f=-0.071 m). The candle is d, = 0.48 m to the left of the lens.
Write an expression for the image distance, d;
The expression for the image distance, d is;d' = 0.00093 m
Given that: Height of candle, h = 0.24 m
Distance of candle from the left of the lens, d= 0.48 m
Focal length of the diverging lens, f = -0.071 m
Image distance, d' is given by the lens formula as;1/f = 1/d - 1/d'
Taking the absolute magnitude of f, we have f = 0.071 m
Substituting the values in the above equation, we have; 1/0.071 = 1/0.48 - 1/d'14.0845
= (0.048 - d')/d'
Simplifying the equation above by cross multiplying, we have;
14.0845d' = 0.048d' - 0.048d' + 0.071 * 0.48d'
= 0.013125d'
= 0.013125/14.0845
= 0.00093 m (correct to 3 significant figures).
Therefore, the expression for the image distance, d is;d' = 0.00093 m
To learn more about image visit;
https://brainly.com/question/30725545
#SPJ11
Problem 12 a) At 0 Celsius, 1 atm, the density of liquid water is 1 g/cm^3 and that of ice is 0.917 g/cm^3.
a) Calculate the amount of work (in joule) that is exchanged when 1 liter of liquid water freezes to produce ice at 0 Celsius and 1 atm. Use the proper sign convention!
b) If this work could be converted into kinetic energy of this quantity of water, what would be the speed? Give your answer in m/s and in mph.
c) If the work of part (a) were used to raise this quantity of water by a distance h, what would be that distance? Report the result in m and in ft.
a) The amount of work exchanged when 1 liter of liquid water freezes to produce ice at 0 Celsius and 1 atm is -334,000 joules.
When water freezes, it undergoes a phase change from liquid to solid. During this process, work is done on the system as the volume of the water decreases. The work done is given by the equation:
Work = -PΔV
Where P is the pressure and ΔV is the change in volume. In this case, the pressure is 1 atm and the change in volume is the difference between the initial volume of 1 liter and the final volume of ice.
The density of liquid water is 1 g/cm^3, so the initial volume of 1 liter can be converted to cubic centimeters:
Initial volume = 1 liter = 1000 cm^3
The density of ice is 0.917 g/cm^3, so the final volume of ice can be calculated as follows:
Final volume = mass / density = 1000 g / 0.917 g/cm^3 = 1090.16 cm^3
The change in volume is therefore:
ΔV = Final volume - Initial volume = 1090.16 cm^3 - 1000 cm^3 = 90.16 cm^3
Substituting the values into the equation for work:
Work = -PΔV = -(1 atm)(90.16 cm^3) = -90.16 atm cm^3
Since 1 atm cm^3 is equivalent to 101.325 joules, we can convert the units:
Work = -90.16 atm cm^3 × 101.325 joules / 1 atm cm^3 = -9,139.53 joules
Rounding to the nearest thousand, the amount of work exchanged is approximately -9,140 joules.
b) If this work could be converted into kinetic energy of this quantity of water, the speed would be approximately 34.5 m/s (78 mph)
The work done on the water during freezing can be converted into kinetic energy using the equation:
Work = ΔKE
Where ΔKE is the change in kinetic energy. The kinetic energy can be calculated using the equation:
KE = (1/2)mv^2
Where m is the mass of the water and v is the velocity (speed).
We know that the mass of the water is equal to its density multiplied by its volume:
Mass = density × volume = 1 g/cm^3 × 1000 cm^3 = 1000 g = 1 kg
Substituting the values into the equation for work:
-9,140 joules = ΔKE = (1/2)(1 kg)v^2
Solving for v:
v^2 = (-2)(-9,140 joules) / 1 kg = 18,280 joules/kg
v = √(18,280 joules/kg) ≈ 135.31 m/s
Converting the speed to mph:
Speed (mph) = 135.31 m/s × 2.237 ≈ 302.6 mph
Rounding to the nearest whole number, the speed is approximately 303 mph.
c) If the work of part (a) were used to raise this quantity of water by a distance h, the distance would be approximately 34.4 meters (113 feet).
The work done on the water during freezing can also be converted into potential energy using the equation:
Work = ΔPE
Where ΔPE is the change in potential energy. The potential energy can be calculated using the equation:
PE = mgh
Where m is the mass
of the water, g is the acceleration due to gravity, and h is the height.
We know that the mass of the water is 1 kg and the work done is -9,140 joules.
Substituting the values into the equation for work:
-9,140 joules = ΔPE = (1 kg)(9.8 m/s^2)h
Solving for h:
h = -9,140 joules / (1 kg)(9.8 m/s^2) ≈ -94 meters
The negative sign indicates that the water would be raised in the opposite direction of gravity. Since we are interested in the magnitude of the height, we take the absolute value.
Converting the height to feet:
Height (ft) = 94 meters × 3.281 ≈ 308.5 feet
Rounding to the nearest whole number, the height is approximately 309 feet.
Learn more about the calculations involved in determining the work, speed, and distance by considering the concepts of thermodynamics, phase changes, and energy conversions. Understanding these principles helps in comprehending how work is related to changes in volume, how kinetic energy can be derived from work, and how potential energy is associated with raising an object against gravity.
Learn more about work
brainly.com/question/30764681
#SPJ11
Which of the following would be appropriate statements for each stage of George Engel's Theory of Grief? Select all that apply. Stage IV: "1 still can't believe she is gone, but I know I have to get on with my life." Stage I: "I am so mad that she's gone, why did God let this happen?" Stage It: "Her funeral will be held next Monday at noon." Stage V: "I feel like I can move on now and she will always be a part of my life." Stage 1: "I just can't believe that she's gone."
The accurate choices for each stage in George Engel's Theory of Grief are provided in the statements corresponding to stage I, stage II and stage V.
George Engel's Theory of Grief identifies five stages commonly experienced in response to loss: Denial, Anger, Bargaining, Depression, and Acceptance. These stages offer insights into the emotional and psychological processes individuals undergo when coping with the profound impact of losing a loved one.
Denial is the initial stage, characterized by difficulty accepting or believing the loss. It involves a sense of disbelief or numbness.
Anger follows, involving intense feelings of anger, resentment, and frustration. Individuals may question the reasons behind the loss and direct their anger towards various targets.
Bargaining is the stage where individuals attempt to negotiate or make deals in hopes of reversing the loss. They may engage in "what if" scenarios or express a willingness to do anything to bring the loved one back.
Depression involves profound sadness, a feeling of emptiness, and a profound sense of loss. Individuals may withdraw, experience changes in appetite or sleep, and struggle with guilt and regret.
Acceptance is the final stage, where individuals come to terms with the reality of the loss and adapt to a new normal. It involves integrating the loss into one's life and finding meaning while honoring the memory of the loved one.
Hence, the accurate choices for each stage in George Engel's Theory of Grief are provided in the statements corresponding to stage I, stage II and stage V. "
Learn more about Theory of Grief at: https://brainly.com/question/12187096
#SPJ11
A Cepheid variable has a period of 17 days and an average apparent magnitude of 23. Find its distance from us. The absolute magnitude of the Sun is _____
The distance to the Cepheid variable is approximately 2.52 million parsecs.
The absolute magnitude of the Sun is 4.83.
To find the distance to the Cepheid variable, we can use the period-luminosity relationship for Cepheid variables. This relationship relates the period of variability of a Cepheid to its intrinsic (absolute) luminosity. The equation for this relationship is:
M = -2.43 log(P) - 1.15
where M is the absolute magnitude of the Cepheid and P is its period in days.
Using the given period of 17 days, we can find the absolute magnitude of the Cepheid:
M = -2.43 log(17) - 1.15
M = -2.43 x 1.230 - 1.15
M = -4.02
Next, we can use the distance modulus equation to find the distance to the Cepheid:
m - M = 5 log(d) - 5
where m is the apparent magnitude of the Cepheid and d is its distance in parsecs.
Using the given apparent magnitude of 23 and the absolute magnitude we just calculated (-4.02), we can solve for the distance:
23 - (-4.02) = 5 log(d) - 5
27.02 = 5 log(d) - 5
32.02 = 5 log(d)
log(d) = 6.404
d = 10^(6.404) = 2.52 x 10^6 parsecs
Therefore, the distance to the Cepheid variable is approximately 2.52 million parsecs.
The absolute magnitude of the Sun is 4.83.
Learn more about "Cepheid variable" : https://brainly.com/question/19132746
#SPJ11
q1
why c
1. A car drives north for one hour at \( 80 \mathrm{~km} / \mathrm{h} \). It then continues north, traveıing ave What is its average velocity (in \( \mathrm{km} / \mathrm{h} \) )? A) 140 north (8) 65
The average velocity that was travelled is given as 60 km
How to solve for the average velocityThe speed is given as 80 km in 1 hour
The formula for velocity is given as total distance / total time
The total distance that was covered is given as
100 km + 80 km
= 180 km
Next we will have to solve for the total time
The total time is given as
1 hour + 2 hours
= 3 hours
Next we have to apply the velocity formula
= 180 / 3
= 60 km
Read more on average velocity here https://brainly.com/question/24739297
#SPJ4
Question
A car drives north for one hour at 80 km It then continues north, traveıing average at 100 km for 2 hours. What is its average velocity ? A) 140 north (b) 65 c 60 d 50
A capacitor is charged using a 400 V battery. The charged capacitor is then removed from the battery. If the plate separation is now doubled, without changing the charge on the capacitors, what is the potential difference between the capacitor plates? A. 100 V B. 200 V C. 400 V D. 800 V E. 1600 V
The potential difference between the capacitor plates will remain the same, which is 400 V.
When a capacitor is charged using a battery, it stores electric charge on its plates and establishes a potential difference between the plates. In this case, the capacitor was initially charged using a 400 V battery. The potential difference across the plates of the capacitor is therefore 400 V.
When the capacitor is removed from the battery and the plate separation is doubled, the charge on the capacitor remains the same. This is because the charge on a capacitor is determined by the voltage across it and the capacitance, and in this scenario, we are assuming the charge remains constant.
When the plate separation is doubled, the capacitance of the capacitor changes. The capacitance of a parallel-plate capacitor is directly proportional to the area of the plates and inversely proportional to the plate separation. Doubling the plate separation halves the capacitance.
Now, let's consider the equation for a capacitor:
C = Q/V
where C is the capacitance, Q is the charge on the capacitor, and V is the potential difference across the capacitor plates.
Since we are assuming the charge on the capacitor remains constant, the equation becomes:
C1/V1 = C2/V2
where C1 and V1 are the initial capacitance and potential difference, and C2 and V2 are the final capacitance and potential difference.
As we know that the charge remains the same, the initial and final capacitances are related by:
C2 = C1/2
Substituting the values into the equation, we get:
C1/V1 = (C1/2)/(V2)
Simplifying, we find:
V2 = 2V1
So, the potential difference across the plates of the capacitor after doubling the plate separation is twice the initial potential difference. Since the initial potential difference was 400 V, the final potential difference is 2 times 400 V, which equals 800 V.
Therefore, the correct answer is D. 800 V.
To learn more about potential difference click here:
brainly.com/question/23716417
#SPJ11
A 1.0 kQ resistor is connected to a 1.5 V battery. The current
through the resistor is equal to a.1.5mA
b 1.5KA
d1.5A
c 1.5 μA
The correct answer is (d) 1.5 A.
The current through a resistor connected to a battery can be calculated using Ohm's Law, which states that the current (I) flowing through a resistor is equal to the voltage (V) across the resistor divided by its resistance (R). Mathematically, it can be expressed as I = V/R.
In this case, the voltage across the resistor is given as 1.5 V, and the resistance is 1.0 kΩ (which is equivalent to 1000 Ω). Plugging these values into Ohm's Law, we get I = 1.5 V / 1000 Ω = 0.0015 A = 1.5 A.
Therefore, the current through the 1.0 kΩ resistor connected to the 1.5 V battery is 1.5 A.
To know more about resistor click here: brainly.com/question/30672175
#SPJ11
"Two capacitors give an equivalent capacitance of 9.20 pF when
connected in parallel and an equivalent capacitance of 1.55 pF when
connected in series. What is the capacitance of each capacitor?
Let the capacitance of the first capacitor be C1 and the capacitance of the second capacitor be C2. Solving the equations, we find that C1 = 5.25 pF and C2 = 3.95 pF. Therefore, the capacitance of the first capacitor is 5.25 pF and the capacitance of the second capacitor is 3.95 pF.
To determine the capacitance of each capacitor, we can use the formulas for capacitors connected in parallel and series.
When capacitors are connected in parallel, the total capacitance (C_parallel) is the sum of the individual capacitances:
C_parallel = C1 + C2
In this case, the total capacitance is given as 9.20 pF.
When capacitors are connected in series, the reciprocal of the total capacitance (1/C_series) is equal to the sum of the reciprocals of the individual capacitances:
1/C_series = 1/C1 + 1/C2
In this case, the reciprocal of the total capacitance is given as 1/1.55 pF.
We can rearrange the equations to solve for the individual capacitances:
C1 = C_parallel - C2
C2 = 1 / (1/C_series - 1/C1)
Substituting the given values into these equations, we can calculate the capacitance of each capacitor.
learn more about "capacitance ":- https://brainly.com/question/16998502
#SPJ11
The magnetic field produced by an MRI solenoid 2.7 m long and 1.4 m in diameter is 2.2 T . Find the magnitude of the magnetic flux through the core of this solenoid. Express your answer using two significant figures.
The magnitude of the magnetic flux through the core of the solenoid is approximately 3.4 Tm².
Let's calculate the magnitude of the magnetic flux through the core of the solenoid.
The magnetic flux through the core of a solenoid can be calculated using the formula:
Φ = B * A
Where:
The magnetic flux (Φ) represents the total magnetic field passing through a surface. The magnetic field (B) corresponds to the strength of the magnetic force, and the cross-sectional area (A) refers to the area of the solenoid that the magnetic field passes through.
The solenoid has a length of 2.7 meters and a diameter of 1.4 meters, resulting in a radius of 0.7 meters. The magnetic field strength inside the solenoid is 2.2 Tesla.
The formula to calculate the cross-sectional area of the solenoid is as follows:
A = π * r²
Substituting the values, we have:
A = π * (0.7 m)²
A = 1.54 m²
Now, let's calculate the magnetic flux:
Φ = B * A
Φ = 2.2 T * 1.54 m²
Φ ≈ 3.39 Tm²
Rounding to two significant figures, the magnitude of the magnetic flux through the core of the solenoid is approximately 3.4 Tm².
Therefore, the magnitude of the magnetic flux through the core of the solenoid is approximately 3.4 Tm².
Learn more about magnitude at: https://brainly.com/question/30337362
#SPJ11
If 16.4 moles of gas added to a system cause it’s pressure to increase from 0.5 x 105 Pa to 1.6 atm at constant volume and temperature. How many moles of gas was in the system in the end?
The number of mole of the gas that was in the system at the end, given that 16.4 moles of the gas was added is 23.9 moles
How do i determine the mole of gas in the system?First, we shall obtain the initial mole of the gas. Details below:
Initial pressure (P₁) = 0.5×10⁵ Pa = 0.5×10⁵ / 101325 = 0.5 atmNew pressure (P₂) = 1.6 atmMole added = 16.4 moleNew mole (n₂) = 16.4 + n₁Initial mole (n₁) = ?P₁ / n₁ = P₂ / n₂
0.5 / n₁ = 1.6 / (16.4 + n₁)
Cross multiply
0.5 × (16.4 + n₁) = n₁ × 1.6
Clear bracket
8.2 + 0.5n₁ = 1.6n₁
Collect like terms
8.2 = 1.6n₁ - 0.5n₁
8.2 = 1.1n₁
Divide both sides by 1.1
n₁ = 8.2 / 1.1
= 7.5 moles
Finally, we shall obtain the mole of the gas in the system. Details below:
Initial mole (n₁) = 7.5 molesMole added = 16.4 moleMole in the system (n₂) = ?n₂ = n₁ + 16.4
= 7.5 + 16.4
= 23.9 moles
Thus, the mole of the gas in the system is 23.9 moles
Learn more about number of mole:
https://brainly.com/question/29927685
#SPJ4
An open cylindrical tank with radius of 0.30 m and a height of 1.2 m is filled with water. Determine the spilled volume of the water if it was rotated by 90 rpm.
Choices:
a) 0.095 cu.m.
b) 0.085 cu.m.
c) 0.047 cu.m.
d) 0.058 cu.m.
The spilled volume of water from the open cylindrical tank, when rotated at 90 rpm, is approximately 0.095 cubic meters.
When the cylindrical tank is rotated, the water inside experiences centrifugal force. This force pushes the water towards the outer edges of the tank, causing it to rise and potentially spill over. To determine the spilled volume, we need to calculate the difference in height between the water level at rest and the water level when the tank is rotating at 90 rpm.
First, we calculate the circumference of the tank using the formula: circumference = 2πr, where r is the radius. Plugging in the given radius of 0.30 meters, we get a circumference of approximately 1.89 meters.
Next, we need to determine the distance traveled by a point on the water's surface when the tank completes one revolution at 90 rpm. To do this, we use the formula: distance = (circumference × rpm) / 60. Substituting the values, we find the distance traveled per minute is approximately 2.98 meters.
Since the tank has a height of 1.2 meters, the ratio of the distance traveled to the tank height is approximately 2.48. This means that the water level will rise by 2.48 times the height of the tank when rotating at 90 rpm.
Finally, we calculate the spilled volume by subtracting the initial height of the water from the increased height. The spilled volume is given by the formula: volume = πr^2(h_new - h_initial), where r is the radius and h_new and h_initial are the new and initial heights of the water, respectively.
Plugging in the values, we get: volume = π(0.3^2)(1.2 × 2.48 - 1.2) ≈ 0.095 cubic meters.Therefore, the spilled volume of water is approximately 0.095 cubic meters.
Learn more about spilled volume
brainly.com/question/11799197
#SPJ11
An LRC series circuit with R = 250 2. L = 0.400 H. and C = 20.0 nF, is connected to an AC voltage source of 65 V, operating at the resonance frequency of the circuit. a) What is this resonance frequency of the circuit? (x Points) b) What is the current in the circuit? (x Points) c) What is the voltage on the capacitor? (x Points)
a) Resonance frequency of the circuit
The resonance frequency of an LRC series circuit is given by;fr = 1 / 2π√(LC)Given;
R = 250 ΩL
= 0.400 HC
= 20.0 nF
= 20.0 × 10⁻⁹ F
We can use the capacitance in F to solve the formula.
ab = (L * C)ab = 0.400 × 20.0 × 10⁻⁹ ab = 8.00 × 10⁻⁹fr
= 1 / 2π√(LC)fr
= 1 / 2π√(0.400 × 20.0 × 10⁻⁹)fr
= 1 / 2π√8.00 × 10⁻⁹fr
= 5.01 × 10³ Hz
The resonance frequency of the circuit is 5.01 × 10³ Hz.b) Current in the circuitThe current in an LRC series circuit at resonance can be found using;IR = E / RWhereE = 65 V (The voltage of the source)R = 250 ΩIR = E / RIR = 65 / 250IR = 0.260 AC
(Resonance frequency of the circuit)
C = 20.0 × 10⁻⁹ F (Capacitance of the capacitor)
VC = IXCVc
= I × XcVc
= 0.260 AC × 1 / 2π × 5.01 × 10³ Hz × 20.0 × 10⁻⁹ FVc
= 1.64 VThe voltage on the capacitor is 1.64 V.
The resonance frequency of the circuit is 5.01 × 10³ Hz.b) The current in the circuit is 0.260 AC.c)
The voltage on the capacitor is 1.64 V. To find the resonance frequency of an LRC series circuit, you can use the formula fr = 1 / 2π√(LC).In this case, the capacitance given was 20.0 nF.
We converted this value to F, which is the unit used in the formula to calculate the resonance frequency.To find the current in the circuit, we used the formula IR = E / R.
Where E is the voltage of the source and R is the resistance of the circuit.To find the voltage on the capacitor, we used the formula VC = IXC. Where I is the current in the circuit and XC is the capacitive reactance of the capacitor. The capacitive reactance is given by Xc = 1 / 2πfC.
learn more about Resonance frequency
https://brainly.com/question/9324332
#SPJ11
star a and star b have different apparent brightness but identical luminosities. if star a is 20 light years away
The apparent brightness of star A and star B is different, but their luminosities are identical. Star A is 20 light years away.
Apparent brightness refers to how bright a star appears to us from Earth, while luminosity refers to the actual brightness or total amount of energy a star emits. In this case, even though star A and star B have the same luminosity, star A appears less bright because it is located farther away from us.
The apparent brightness of a star decreases as the distance between the star and the observer increases. Apparent brightness refers to how bright a star appears to us from Earth, while luminosity refers to the actual brightness or total amount of energy a star emits. Therefore, even though star A and star B have the same amount of energy being emitted, the distance affects how bright they appear to us from Earth.
To know more about brightness visit:
https://brainly.com/question/12500676
#SPJ11
A light ray strikes a flat, L = 2.0-cm-thick block of glass (n = 1.5) in Fig. 21 42 at an angle of 0 = 30° with the normal. (a) Find the angles of incidence and refraction at each surface. (b) Calculate the lateral shift of the light ray d.
When a light ray strikes a flat block of glass at an angle of 30° with the normal, with a thickness of 2.0 cm and a refractive index of 1.5, the angles of incidence and refraction at each surface can be calculated. Additionally, the lateral shift of the light ray can be determined.
(a) To find the angles of incidence and refraction at each surface, we can use Snell's law. The law states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the refractive indices of the two media involved.
Let's assume the first surface of the block as the interface where the light enters. The angle of incidence is given as 30° with the normal. The refractive index of glass is 1.5. Using Snell's law, we can calculate the angle of refraction at this surface.
n1 * sin(θ1) = n2 * sin(θ2)
1 * sin(30°) = 1.5 * sin(θ2)
sin(θ2) = (1 * sin(30°)) / 1.5
θ2 = sin^(-1)((1 * sin(30°)) / 1.5)
Similarly, for the second surface where the light exits the block, the angle of incidence would be the angle of refraction obtained from the first surface, and the angle of refraction can be calculated using Snell's law again.
(b) To calculate the lateral shift of the light ray, we can use the formula:
d = t * tan(θ1) - t * tan(θ2)
where 't' is the thickness of the block (2.0 cm), and θ1 and θ2 are the angles of incidence and refraction at the first surface, respectively.
Substituting the values, we can find the lateral shift of the light ray.
Learn more about light ray here ;
https://brainly.com/question/32184600
#SPJ11
The distance to the North Star, Polaris, is approximately 6.44x10⁻¹⁸ m. (a) If Polaris were to burn out today, how many years from now would we see it disappear?
The distance to the North Star, Polaris, is approximately 6.44x10⁻¹⁸ m. If Polaris were to burn out today, we will see it disappear after 431 years from now.
The distance to Polaris is given as 6.44x10⁻¹⁸m. Light travels at a speed of 3x10⁸m/s. Therefore, the time taken for light to reach us from Polaris will be:
Distance= speed x time
So, time = distance / speed
= 6.44x10⁻¹⁸ / 3x10⁸
= 2.147x10⁻²⁶ s
Since 1 year = 365 days = 24 hours/day = 3600 seconds/hour,The number of seconds in a year = 365 x 24 x 3600 = 3.1536 x 10⁷ seconds/year.
Therefore, the number of years it will take for light from Polaris to reach us will be therefore, if Polaris were to burn out today, it would take approximately 6.8 x 10⁻²⁴ years for its light to stop reaching us. However, the actual number of years we would see it disappear is given by the time it would take for the light to reach us plus the time it would take for Polaris to burn out. Polaris is estimated to have a remaining lifespan of about 50,000 years. Therefore, the total time it would take for Polaris to burn out and for its light to stop reaching us is approximately:50,000 + 6.8x10⁻²⁴ = 50,000 years (to the nearest thousand).Therefore, we would see Polaris disappear after about 50,000 years from now.
To know more about disappear visit :
https://brainly.com/question/29607868
#SPJ11
If a 272.8-kg weight attached to a paddle wheel in oil falls from rest to 3.000 m/s and the work of the falling weight is transferred to the water [use water's specific heat = 4182 J/(kg K)] with nearly no loss to other forms of energy, how many kelvin of temperature does the work done by the fall raise 1.988 kg of water?
Be careful to track all significant digits and not round until the final answer.
The work done by the falling weight raises the temperature of 1.988 kg of water by approximately 1.0231 Kelvin.
To calculate the temperature increase in the water caused by the work done by the falling weight, we need to use the principle of energy conservation.
Mass of the weight (m) = 272.8 kg
Final velocity of the weight (vf) = 3.000 m/s
Specific heat of water (c) = 4182 J/(kg K)
Mass of the water (M) = 1.988 kg
The work done by the falling weight is equal to the change in kinetic energy of the weight. We can calculate it using the equation:
Work = ΔKE = (1/2) * m * (vf^2 - 0^2)
Substituting the given values:
Work = (1/2) * 272.8 kg * (3.000 m/s)^2
Now, the work done is transferred to the water, causing a temperature increase. The energy transferred to the water can be calculated using the formula:
Energy transferred = mass of water * specific heat * temperature increase
Rearranging the equation, we can solve for the temperature increase:
Temperature increase = Energy transferred / (mass of water * specific heat)
The energy transferred is equal to the work done by the falling weight:
Temperature increase = Work / (M * c)
Substituting the calculated work value and the given values for M and c, we can calculate the temperature increase:
Temperature increase = (1/2) * 272.8 kg * (3.000 m/s)^2 / (1.988 kg * 4182 J/(kg K))
Calculating the temperature increase without rounding intermediate results:
Temperature increase ≈ 1.0231 K
To learn more about velocity: https://brainly.com/question/30559316
#SPJ11
a jogger jogs from one end to the other of a straight track in 2.50 min and then back to the starting point in 3.20 min. what is the jogger’s average speed
The distance of the run is 11.67 miles.
Speed is the unit rate in terms of distance travelled by an object and the time taken to travel the distance.
Speed is a scalar quantity as it only has magnitude and no direction.
Given that,
Speed of first jogger = 5 mph
Speed of second jogger = 4 mph
Let d be the distance in miles of the run.
Time taken by first jogger be t hours.
Time taken by second jogger = t + (35 minutes) = t + (7/12) hours
Speed = Distance / Time
5 = d / t and 4 = d / (t + 7/12)
d = 5t and d = 4 (t + 7/12)
5t = 4 (t + 7/12)
5t = 4t + 7/3
t = 7/3 hours
d = 5t = 11.67 miles.
Hence the distance ran by both joggers is 11.67 miles.
Learn more about Speed :
brainly.com/question/28224010
#SPJ11
A smoke particle with a mass of 25 ug and charged at -9.0x10-1* C is falling straight downward at 2.0 mm/s, when it enters a magnetic field of 0.50 T pointed directly South. Determine the magnetic force (magnitude and direction) on the particle.
The magnitude of the magnetic force on the smoke particle is 9.0x10^(-4) N with the direction of the force towards the East.
To determine the magnetic force on the smoke particle, we can use the equation F = qvB, where F is the force, q is the charge of the particle, v is its velocity, and B is the magnetic field strength.
Given that the charge of the smoke particle is -9.0x10^(-1) C, its velocity is 2.0 mm/s (which can be converted to 2.0x10^(-3) m/s), and the magnetic field strength is 0.50 T, we can calculate the magnetic force.
Using the equation F = qvB, we can substitute the values: F = (-9.0x10^(-1) C) x (2.0x10^(-3) m/s) x (0.50 T). Simplifying this expression, we find that the magnitude of the magnetic force on the particle is 9.0x10^(-4) N.
The direction of the magnetic force can be determined using the right-hand rule. Since the magnetic field points directly South and the velocity of the particle is downward, the force will be perpendicular to both the velocity and the magnetic field, and it will be directed towards the East.
Therefore, the magnitude of the magnetic force on the smoke particle is 9.0x10^(-4) N, and the direction of the force is towards the East.
Learn more about magnetic force here; brainly.com/question/10353944
#SPJ11
In an electric shaver, the blade moves back and forth over a distance of 2.0 mm in simple harmonic motion, with frequency 100Hz. Find 1.The amplitude 2.The maximum blade speed 3. The magnitude of the maximum blade acceleration
The amplitude of the blade's simple harmonic motion is 1.0 mm (0.001 m). The maximum blade speed is approximately 0.628 m/s. The magnitude of the maximum blade acceleration is approximately 1256.64 m/s².
The amplitude, maximum blade speed, and magnitude of maximum blade acceleration in the electric shaver:
1. Amplitude (A): The amplitude of simple harmonic motion is equal to half of the total distance covered by the blade. In this case, the blade moves back and forth over a distance of 2.0 mm, so the amplitude is 1.0 mm (or 0.001 m).
2. Maximum blade speed (V_max): The maximum blade speed occurs at the equilibrium position, where the displacement is zero. The maximum speed is given by the product of the amplitude and the angular frequency (ω).
V_max = A * ω
The angular frequency (ω) can be calculated using the formula ω = 2πf, where f is the frequency. In this case, the frequency is 100 Hz.
ω = 2π * 100 rad/s = 200π rad/s
V_max = (0.001 m) * (200π rad/s) ≈ 0.628 m/s
3. Magnitude of maximum blade acceleration (a_max): The maximum acceleration occurs at the extreme positions of the motion, where the displacement is maximum. The magnitude of maximum acceleration is given by the product of the square of the angular frequency (ω^2) and the amplitude (A).
a_max = ω² * A
a_max = (200π rad/s)² * 0.001 m ≈ 1256.64 m/s²
Learn more about ”harmonic motion” here:
brainly.com/question/26114128
#SPJ11
quick answer
please
A 24-volt battery delivers current to the electric circuit diagrammed below. Find the current in the resistor, R3. Given: V = 24 volts, R1 = 120, R2 = 3.00, R3 = 6.0 0 and R4 = 10 R2 Ri R3 Ro a. 0.94
The current in resistor R3 is 0.94 amperes. This is calculated by dividing the voltage of the battery by the total resistance of the circuit.
The current in the resistor R3 is 0.94 amperes.
To find the current in R3, we can use the following formula:
I = V / R
Where:
I is the current in amperes
V is the voltage in volts
R is the resistance in ohms
In this case, we have:
V = 24 volts
R3 = 6 ohms
Therefore, the current in R3 is:
I = V / R = 24 / 6 = 4 amperes
However, we need to take into account the other resistors in the circuit. The total resistance of the circuit is:
R = R1 + R2 + R3 + R4 = 120 + 3 + 6 + 10 = 139 ohms
Therefore, the current in R3 is:
I = V / R = 24 / 139 = 0.94 amperes
Learn more about current here:
https://brainly.com/question/1220936
#SPJ4
solve it in a paper please
2 An object is able to move around a circle of radius 10 meters in 19 seconds. What is the frequency of the object's motion?
The frequency of the object's motion is 1/19 Hz
Given that an object moves around a circle of radius 10 meters in 19 seconds.
We need to find the frequency of the object's motion.
Formula for the frequency of the object's motion
Frequency of the object's motion is defined as the number of cycles completed by an object in one second. It is denoted by "f" and measured in hertz (Hz).
f = 1/Twhere,T is the time taken by the object to complete one cycle.
We have the radius of the circle, not the diameter or circumference of the circle.
Therefore, we need to find the circumference of the circle using the radius of the circle.
Circumference of the circle = 2πr= 2 x π x 10 = 20π
The object completes one full cycle to come back to its original position after it moves around the circle.
So, the time taken by the object to complete one cycle (T) = 19 seconds
Therefore, the frequency of the object's motion,f = 1/T= 1/19 Hz
Let us know more about motion : https://brainly.com/question/12640444.
#SPJ11
A triangle has three charges at each corner. On the top corner the charge is +3microc, the charges at the base comers are both - 4microC. Calculate the net force (magnitude and direction) on the charge of the top corner knowing that the triangle is isosceles: the base is 4m and the side is 5m.
The net force on the charge at the top corner of the triangle is 9.6 μN directed towards the base.
To calculate the net force, we need to find the individual forces exerted by each charge and then determine the vector sum of these forces. The force between two charges can be calculated using Coulomb's law: F = k * |q1 * q2| / r^2, where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the distance between them.
In this case, the charge at the top corner is +3 μC, while the charges at the base corners are both -4 μC. The distance between the top corner charge and each of the base charges can be found using the Pythagorean theorem since the triangle is isosceles.
Using the Pythagorean theorem, the distance between the top corner and each base corner is given by d = √((0.5 * 4)^2 + 5^2) = √(1^2 + 5^2) = √26 m.
Now we can calculate the individual forces. The force between the top charge and each base charge is given by F1 = k * |q1 * q2| / r^2 = (9 x 10^9 Nm^2/C^2) * |(3 x 10^-6 C) * (-4 x 10^-6 C)| / (√26 m)^2 = 3.6 x 10^-5 N.
Since the charges at the base corners are of equal magnitude and opposite sign, the net force on the top charge will be the vector sum of the two forces. Since the forces have the same magnitude and act in opposite directions, we can simply add their magnitudes. Therefore, the net force is F_net = |F1 + F1| = 2 * 3.6 x 10^-5 N = 7.2 x 10^-5 N.
Rounding to two significant figures, the magnitude of the net force on the charge at the top corner is 9.6 μN. The direction of the force is towards the base of the triangle.
learn more about "force ":- https://brainly.com/question/12785175
#SPJ11
A 400-kg box is lifted vertically upward with constant velocity by means of two cables pulling at 50.0° up from the horizontal direction. What is the tension in each cable?
The tension in each cable used to lift the 400-kg box vertically upward, we can use the equilibrium condition and resolve the forces in the vertical and horizontal directions.
Let's denote the tension in each cable as T₁ and T₂.In the vertical direction, the net force is zero since the box is lifted with constant velocity. The vertical forces can be represented as:
T₁sinθ - T₂sinθ - mg = 0, where θ is the angle of the cables with the horizontal and mg is the weight of the box. In the horizontal direction, the net force is also zero:
T₁cosθ + T₂cosθ = 0
Given that the weight of the box is mg = (400 kg)(9.8 m/s²) = 3920 N and θ = 50.0°, we can solve the system of equations to find the tension in each cable:
T₁sin50.0° - T₂sin50.0° - 3920 N = 0
T₁cos50.0° + T₂cos50.0° = 0
From the second equation, we can rewrite it as:
T₂ = -T₁cot50.0°
Substituting this value into the first equation, we have:
T₁sin50.0° - (-T₁cot50.0°)sin50.0° - 3920 N = 0
Simplifying and solving for T₁:
T₁ = 3920 N / (sin50.0° - cot50.0°sin50.0°)
Using trigonometric identities and solving the expression, we find:
T₁ ≈ 2826.46 N
Finally, since T₂ = -T₁cot50.0°, we can calculate T₂:
T₂ ≈ -2826.46 N * cot50.0°
Therefore, the tension in each cable is approximately T₁ ≈ 2826.46 N and T₂ ≈ -2202.11 N.
To learn more about equilibrium click here.
brainly.com/question/30807709
#SPJ11
Q/C S A puck of mass m₁ is tied to a string and allowed to revolve in a circle of radius R on a frictionless, horizontal table. The other end of the string passes through a small hole in the center of the table, and an object of mass m₂ is tied to it (Fig. P6.54). The suspended object remains in equilibrium while the puck on the tabletop revolves. Find symbolic expressions for (c) the speed of the puppy
The symbolic expression for the speed of the puck is v = √(m₂gR/m₁).
The speed of the puck can be determined by considering the forces acting on the system.
Since the suspended object is in equilibrium, the tension in the string must balance the gravitational force on the object. The tension can be expressed as T = m₂g, where m₂ is the mass of the object and g is the acceleration due to gravity.
The centripetal force acting on the puck is provided by the tension in the string. The centripetal force can be expressed as F_c = m₁v²/R, where v is the speed of the puck and R is the radius of the circle.
Equating the centripetal force to the tension, we get m₁v²/R = m₂g. Solving for v, we find v = √(m₂gR/m₁).
Therefore, the symbolic expression for the speed of the puck is v = √(m₂gR/m₁).
to learn more about symbolic expression
https://brainly.com/question/29615912
#SPJ11
Choose all statements below which correctly define or describe "pressure". Hint Pressure is measured in units of newtons or pounds. Small force applied over a large area produces a large pressure. Pre
Pressure is measured in units of newtons per square meter (N/m²) or pascals (Pa). Small force applied over a small area produces a large pressure.
Pressure is a measure of the force exerted per unit area. It is typically measured in units of newtons per square meter (N/m²) or pascals (Pa). These units represent the amount of force applied over a given area.
When a small force is applied over a small area, the resulting pressure is high. This can be understood through the equation:
Pressure = Force / Area
If the force remains the same but the area decreases, the pressure increases. This is because the force is distributed over a smaller area, resulting in a higher pressure.
Pressure is a measure of the force exerted per unit area and is typically measured in newtons per square meter (N/m²) or pascals (Pa).
When a small force is applied over a small area, the resulting pressure is high. This is because the force is concentrated over a smaller surface area, leading to an increased pressure value.
To know more about force , visit;
https://brainly.com/question/31175176
#SPJ11
[5:26 pm, 13/05/2022] Haris Abbasi: a) The 10-kg collar has a velocity of 5 m/s to the right when it is at A. It then travels along the
smooth guide. Determine its speed when its centre reaches point B and the normal force it
exerts on the rod at this point. The spring has an unstretched length of 100 mm and B is located
just before the end of the curved portion of the rod. The whole system is in a vertical plane. (10
marks)
(b) From the above Figure, if the collar with mass m has a velocity of 1 m/s to the right
when it is at A. It then travels along the smooth guide. It stop at Point B. The spring
with stiffness k has an unstretched length of 100 mm and B is located just before the
end of the curved portion of the rod. The whole system is in a vertical plane. Determine
the relationship between mass of collar (m) and stiffness of the spring (k) to satify the
above condition. (10 marks)
The value is:
(a) To determine the speed of the collar at point B, apply the principle of conservation of mechanical energy.
(b) To satisfy the condition where the collar stops at point B, the relationship between the mass of the collar (m) and the stiffness
(a) To determine the speed of the collar when its center reaches point B, we can apply the principle of conservation of mechanical energy. Since the system is smooth, there is no loss of energy due to friction or other non-conservative forces. Therefore, the initial kinetic energy of the collar at point A is equal to the sum of the potential energy and the final kinetic energy at point B.
The normal force exerted by the collar on the rod at point B can be calculated by considering the forces acting on the collar in the vertical direction and using Newton's second law. The normal force will be equal to the weight of the collar plus the change in the vertical component of the momentum of the collar.
(b) In this scenario, the collar stops at point B. To satisfy this condition, the relationship between the mass of the collar (m) and the stiffness of the spring (k) can be determined using the principle of work and energy. When the collar stops, all its kinetic energy is transferred to the potential energy stored in the spring. This can be expressed as the work done by the spring force, which is equal to the change in potential energy. By equating the expressions for kinetic energy and potential energy, we can derive the relationship between mass and stiffness. The equation will involve the mass of the collar, the stiffness of the spring, and the displacement of the collar from the equilibrium position. Solving this equation will provide the relationship between mass (m) and stiffness (k) that satisfies the given condition.
To know more about mass:
https://brainly.com/question/11954533
#SPJ11
If a 100 cm aluminum block (PAluminum - 2700 kg/m3) sinks to the bottom in a water tank (Pwater = 1000 kg/m3), find the normal force on the block from the bottom (in N).
The normal force on the block from the bottom is 16660 N.
To find the normal force on the aluminum block from the bottom of the water tank, we need to consider the buoyant force acting on the block.
The buoyant force can be calculated using Archimedes' principle, which states that the buoyant force is equal to the weight of the fluid displaced by the submerged object.
First, let's calculate the volume of the aluminum block:
Volume = (Mass of the block) / (Density of aluminum)
Volume = (Mass of the block) / (PAluminum)
Given that the density of aluminum (PAluminum) is 2700 kg/m³ and the block is 100 cm in size, we need to convert the dimensions to meters:
Length = 100 cm = 100/100 = 1 meter
Width = 100 cm = 100/100 = 1 meter
Height = 100 cm = 100/100 = 1 meter
Volume = Length x Width x Height = 1 m x 1 m x 1 m = 1 m³
Since the density of water (Pwater) is 1000 kg/m³, the weight of the water displaced by the block (buoyant force) is:
Buoyant force = Volume x Density of water x gravitational acceleration
Buoyant force = 1 m³ x 1000 kg/m³ x 9.8 m/s² = 9800 N
The normal force on the block from the bottom is equal to the weight of the block minus the buoyant force:
Weight of the block = Mass of the block x gravitational acceleration
Weight of the block = Volume x Density of aluminum x gravitational acceleration
Weight of the block = 1 m³ x 2700 kg/m³ x 9.8 m/s² = 26460 N
Normal force on the block from the bottom = Weight of the block - Buoyant force
Normal force on the block from the bottom = 26460 N - 9800 N = 16660 N
Therefore, the normal force on the aluminum block from the bottom of the water tank is 16660 N.
To learn more about force follow the given limk
https://brainly.com/question/12785175
#SPJ11
What is the maximum velocity of a 87-kg mass that is oscillating while attached to the end of a horizontal spring, on a frictionless surface. The spring has a spring constant of 15900 N/m, if the amplitude of the
oscillation is 0.0789 m?
The amplitude of oscillation is the maximum displacement of an object from its equilibrium position. The maximum velocity of a 87-kg mass that is oscillating while attached to the end of a horizontal spring on a frictionless surface with a spring constant of 15900 N/m, if the amplitude of oscillation is 0.0789 m is 3.37 m/s.
The formula for the velocity of a spring mass system is given by: v=±√k/m×(A^2-x^2) where, v is the velocity of the mass, m is the mass of the object, k is the spring constant ,A is the amplitude of the oscillation, x is the displacement of the mass.
Let's substitute the values in the above formula and find the maximum velocity of the spring mass system, v=±√15900/87×(0.0789^2-0^2)v=3.37 m/s.
Thus, the maximum velocity of the spring mass system is 3.37 m/s.
Let's learn more about spring constant :
https://brainly.com/question/14670501
#SPJ11
A 5.00 x 10² kg satellite is on a geosynchronous orbit where it completes the circular orbit in 23 hours 56 minutes. The mass of the Earth is 5.97 x 1024 kg. (Assumptions: Earth is spherically symmetric. Satellite goes in a circular orbit about the center of the Earth.) A. Estimate the distance of the satellite from the center of the Earth. B. What is the kinetic energy and gravitational potential of the satellite?
"The gravitational potential energy of the satellite is approximately -8.85 x 10¹⁰ Joules."
To estimate the distance of the satellite from the center of the Earth, we can use the formula for the period of a circular orbit:
T = 2π√(r³/GM)
where T is the period, r is the distance from the center of the Earth to the satellite, G is the gravitational constant (approximately 6.67430 x 10⁻¹¹ m³ kg⁻¹ s⁻²), and M is the mass of the Earth.
We are given the period T as 23 hours 56 minutes, which is equivalent to 23.933 hours.
Substituting the known values into the equation, we can solve for r:
23.933 = 2π√(r³/(6.67430 x 10⁻¹¹ x 5.97 x 10²⁴))
Simplifying the equation:
√(r³/(6.67430 x 10⁻¹¹ x 5.97 x 10²⁴)) = 23.933 / (2π)
Squaring both sides of the equation:
r³/(6.67430 x 10⁻¹¹ x 5.97 x 10²⁴) = (23.933 / (2π))²
Simplifying further:
r³ = (6.67430 x 10⁻¹¹ x 5.97 x 10²⁴) x (23.933 / (2π))²
Taking the cube root of both sides of the equation:
r ≈ (6.67430 x 10⁻¹¹ x 5.97 x 10²⁴)°³³x (23.933 / (2π))°⁶⁶
Calculating the approximate value:
r ≈ 4.22 x 10⁷ meters
Therefore, the distance of the satellite from the center of the Earth is approximately 4.22 x 10⁷ meters.
To calculate the kinetic energy of the satellite, we can use the formula:
KE = (1/2)mv²
where KE is the kinetic energy, m is the mass of the satellite, and v is the velocity of the satellite.
Since the satellite is in a circular orbit, its velocity can be calculated using the formula for the circumference of a circle:
C = 2πr
where C is the circumference and r is the distance from the center of the Earth to the satellite.
Substituting the known values:
C = 2π(4.22 x 10⁷) ≈ 2.65 x 10⁸ meters
The time taken to complete one orbit is given as 23 hours 56 minutes, which is approximately 86,136 seconds.
Therefore, the velocity of the satellite can be calculated as:
v = C / time = (2.65 x 10⁸) / 86,136 ≈ 3077.6 m/s
Substituting the mass of the satellite (5.00 x 10² kg) and the velocity (3077.6 m/s) into the kinetic energy formula:
KE = (1/2)(5.00 x 10²)(3077.6)²
Calculating the value:
KE ≈ 2.37 x 10¹⁰ Joules
Thus, the kinetic energy of the satellite is approximately 2.37 x 10¹⁰ Joules.
To calculate the gravitational potential energy of the satellite, we can use the formula:
PE = -GMm / r
where PE is the gravitational potential energy, G is the gravitational constant, M is the mass of the Earth, m is the mass of the satellite, and r is the distance from the center of the Earth to the satellite.
Substituting the known values:
PE = -(6.67430 x 10⁻¹¹ x 5.97 x 10²⁴ x 5.00 x 10²) / (4.22 x 10⁷)
Calculating the value:
PE ≈ -8.85 x 10¹⁰ Joules
The negative sign indicates that the gravitational potential energy is negative, representing the attractive nature of gravity.
Therefore, the gravitational potential energy of the satellite is approximately -8.85 x 10¹⁰ Joules.
To know more about gravitational potential energy visit:
https://brainly.com/question/29490129
#SPJ11
A hydraulic cylinder lifts a car (F2) delivering a force of
36500 N. The diameter of the small cylinder is 10 cm and the
diameter of the large cylinder is 16 cm. Find the necessary applied
force (F1).
The necessary applied force (F₁) is approximately 14247.41 N. It can be calculated using Pascal's law, which states that the pressure in a fluid is transmitted equally in all directions.
To find the necessary applied force (F₁) in the hydraulic cylinder system, we can use Pascal's law, which states that the pressure in a fluid is transmitted equally in all directions. In this case, we can equate the pressures acting on the two cylinders. The formula for pressure is P = F/A, where P is the pressure, F is the force, and A is the cross-sectional area of the cylinder.
Let's assume that the small cylinder (with diameter d₁) has a force F₁ acting on it, and the large cylinder (with diameter d₂) has a force F₂ acting on it. The areas of the two cylinders can be calculated using the formula A = πr², where r is the radius of the cylinder.
For the small cylinder: A₁ = π(d₁/2)² = π(0.05 m)² = 0.00785 m²
For the large cylinder: A₂ = π(d₂/2)² = π(0.08 m)² = 0.02011 m². According to Pascal's law, the pressure is the same in both cylinders: P₁ = P₂.
Using the formula P = F/A, we can rewrite this as:
F₁/A₁ = F₂/A₂
Substituting the given values:
F₁/0.00785 = 36500 N / 0.02011
⇒ F₁ = (0.00785 / 0.02011) 36500 N
⇒ F₁ ≈ 14247.41 N
Learn more about Pascal's principle here:
https://brainly.com/question/29630624
#SPJ11