10.0 ml of a solution of hcl required 12.5 ml of 0.4 m ba(oh)2 for complete neutralization.how many moles of hcl were present in the sample

Answer: The second reaction took place at a higher temperature

Explanation:

Rate is affected by temperature, as higher temperatures cause the reacting molecules to have more energy.

Collision theory states that in order for a reaction to occur, each reacting molecule must collide with one another in the correct orientation and with enough energy, called the activation energy.

A higher energy caused by a higher temperature will cause the molecules to collide much more frequently, leading to a higher chance of a successful collision, and with more energy to satisfy the activation energy.

Therefore, the second reaction must have taken place at a higher temperature, since the molecules had more energy than the first reaction leading to a higher rate of reaction, and a higher rate constant.

Answer:

Explanation:

Yes, that is correct.

When aluminum sulfate solution (Al2(SO4)3) and calcium hydroxide solution (Ca(OH)2) are mixed, a double displacement reaction occurs, resulting in the formation of solid aluminum hydroxide (Al(OH)3) and solid calcium sulfate (CaSO4). The balanced chemical equation for this reaction is:

Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4

The aluminum hydroxide precipitates out of the solution as a gelatinous solid, while the calcium sulfate forms a white solid. This reaction is commonly used in water treatment plants to remove impurities from drinking water, as the aluminum hydroxide acts as a coagulant that binds to particles and organic matter in the water, allowing them to be removed more easily.

3020 grams of iron are produced when 27.0 moles of hematite react with 86.0 moles of carbon monoxide.

Balanced chemical equation for the reaction between hematite and carbon monoxide will be; Fe₂O₃(s) + 3CO(g) -> 2Fe(s) + 3CO₂(g)

From the balanced equation, we can see that 1 mole of Fe₂O₃ reacts with 3 moles of CO to produce 2 moles of Fe. So, to determine the amount of iron produced, we first need to determine which reactant is limiting.

We can calculate the moles of Fe₂O₃ and CO;

Moles of Fe₂O₃ = 27.0 moles

Moles of CO = 86.0 moles

To determine the limiting reactant, we need to compare the mole ratio of Fe₂O₃ to CO required by the balanced equation (1:3) to the actual mole ratio of Fe₂O₃ to CO provided.

Mole ratio of Fe₂O₃ to CO = 27.0/1 : 86.0/3 = 81 : 86 ≈ 0.94 : 1

Since the actual mole ratio of Fe₂O₃ to CO is less than the mole ratio required by the balanced equation, Fe₂O₃ is the limiting reactant.

The amount of Fe produced can be calculated using the mole ratio of Fe₂O₃ to Fe in the balanced equation.

Moles of Fe = 2/1 × moles of Fe₂O₃ = 2/1 × 27.0 moles = 54.0 moles

Finally, we can convert moles of Fe to grams of Fe using the molar mass of Fe

Grams of Fe = moles of Fe × molar mass of Fe = 54.0 moles × 55.85 g/mol = 3020 g

To know more about limiting reactant here

https://brainly.com/question/2948214

#SPJ4

From the calculation, it is clear that the mass of the S8 that has been produced here is about 136 g.

The mole is commonly used in chemistry for stoichiometric calculations, such as determining the amount of reactants needed in a chemical reaction to produce a desired amount of product.

We know that;

Number of moles of SO2 = 91g/64g/mol

=1.42 moles

Now if 8 moles of SO2 produces 3 moles of  S8

1.42 moles of SO2 will produce 1.42 * 3/8

= 0.53 moles

Mass of the S8 = 0.53 * 256 g/mol

= 136 g

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

The reaction in question is the water gas shift reaction:

CO2(g) + H2(g) ⇌ CO(g) + H2O(g)

At 1000 K, this reaction is endothermic, meaning that it requires heat as a reactant and will shift towards the product side at higher temperatures. However, we need to calculate the reaction quotient (Qc) for this system to determine whether the reaction will proceed towards products or reactants.

The reaction quotient Qc is defined as the product of the concentrations of the products, each raised to the power of their stoichiometric coefficients, divided by the product of the concentrations of the reactants, each raised to the power of their stoichiometric coefficients.

Qc = [CO][H2O] / [CO2][H2]

where the square brackets denote the concentration of each species.

We are given the partial pressures of each gas, but we need to convert these to concentrations using the ideal gas law:

PV = nRT

where P is the partial pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

For each gas, we can solve for the number of moles (n) and then divide by the total volume to obtain the concentration:

[CO2] = (0.0750 atm)(V) / (RT)

[H2] = (0.095 atm)(V) / (RT)

[CO] = (0.0340 atm)(V) / (RT)

[H2O] = (0.0650 atm)(V) / (RT)

where V is the total volume of the mixture.

Substituting these expressions into the equation for Qc, we obtain:

Qc = [(0.0340 atm)(0.0650 atm)] / [(0.0750 atm)(0.095 atm)]

Qc = 0.0232

If Qc < Kc, the reaction will shift towards the product side to reach equilibrium. If Qc > Kc, the reaction will shift towards the reactant side. If Qc = Kc, the reaction is at equilibrium and there is no net change.

The equilibrium constant (Kc) for the water gas shift reaction at 1000 K is not provided, so we cannot directly compare Qc and Kc. However, the small value of Qc (0.0232) suggests that the reaction is not at equilibrium and may shift towards the product side to reach equilibrium.

Therefore, based on the calculated value of Qc, the reaction may proceed towards products at 1000 K in the given mixture of gases.

To know more about equilibrium reactions, visit the link given below:

https://brainly.com/question/15118952

#SPJ4

The empirical formula for the compound is [tex]Fe_{3} O_{4}[/tex].

The chemical includes 27.66 g of oxygen and 72.34 g of iron per 100 g.

1. An element's atomic weight and molar mass are equivalent.

Molar mass of Fe {Iron} = 55.845(g/mol)

Molar mass of O {Oxygen} = 15.9994(g/mol)

Divide each percentage by the total entered percentages to bring the entered percentages' sum to 100% as it is less than 100% (current sum is 99.98%).

Fe {Iron} ⇒ 72.34(old%), 72.35447(new%)

O {Oxygen} ⇒ 27.64(old%), 27.64553 (new%)

If you have 100g of substance, you can calculate the mass of each element by multiplying 100g by the percentage as follows:

Mass of Fe {Iron} = 72.35447gm

Mass of O {Oxygen} =27.64553gm

Divide the mass by the molar mass of each element (from step 1) to determine the number of moles:

Fe {Iron}= 72.35447gm/ 55.845(g/mol) *100 = 129.56302moles

O {Oxygen} = 27.64553gm/15.9994(g/mol) *100 = 172.79104moles

Look for the element with the fewest moles. Iron has the fewest moles of any metal, at just 129.56302425316. divide all mole values by this number:

Moles ÷ Moles Fe

Fe {Iron} = 1

O {Oxygen} = 1.33364

The existing mole levels are not particularly near to whole numbers, yet we need full numbers. Divide all sums by the fractional portion of each non-whole quantity to make them nearly whole:

FO = 0.33364466884954

Fe÷ FO = 1/0.33364466884954

Fe {Iron} = 2.9972

O {Oxygen} = 1.33364/0.33364466884954 = 3.9972

The final mole ratios are obtained by rounding each mole quantity to the closest integer:

Fe {Iron}=3

O {Oxygen} = 4

As a result, the compound's empirical formula is [tex]Fe_{3} O_{4}[/tex].

Learn more about empirical formula here:

https://brainly.com/question/9238625

#SPJ4

The oxidation state of nitrogen changes from 0 to -2. The number of electrons transferred in the reaction are equal to two.

We have a chemical reaction present below, [tex]N_2 + {2 CIO_3}^{-} + H_2O -->{ 2 CIO_4 }^{-} + N_2H_4 \\ [/tex]

We have to determine change in the oxidation state of nitrogen in reaction and total number of electrons transferred in the reaction. Now, first we determine the oxidation state of N in reactants and products side. The oxidation state of Nitrogen, N in reactants is equals to zero. In case of product side, N₂H₄, 2x + 4(1) = 0, where x is oxidation state of N in N₂H₄ ,

=> 2x = -4

=> x = -2

Hence, oxidation state is -2 and total 2 electrons transferred in the above reaction.

For more information about electrons, visit :

https://brainly.com/question/28337734

#SPJ4

Complete question:

[tex]N_2 + {2 CIO_3}^{-} + H_2O -->{ 2 CIO_4 }^{-} + N_2H_4 \\ [/tex], in the above reaction, the oxidation state of nitrogen changes from__ to __.

how many electrons are transferred in the reaction?

The recommended pediatric iv dosage of furosemide is 1 mg/kg not to exceed 6 mg/kg. the child weighs 55 lb. available: furosemide 20 mg/2 ml. The child will receive approximately 2.5 mL of furosemide.

To determine the appropriate dosage of furosemide for the child, first convert their weight from pounds to kilograms.

1 lb = 0.453592 kg

55 lb × 0.453592 kg/lb ≈ 24.95 kg

Now, calculate the dosage using the recommended pediatric IV dosage (1 mg/kg):

24.95 kg × 1 mg/kg ≈ 24.95 mg

Since the dosage should not exceed 6 mg/kg:

24.95 kg × 6 mg/kg = 149.7 mg (maximum dosage)

Since the child's calculated dosage (24.95 mg) is less than the maximum dosage, it can be administered.

Next, determine the volume of furosemide to be given. The available concentration is 20 mg/2 mL. Use the proportion:

20 mg/2 mL = 24.95 mg/x mL

Solve for x:

x = (24.95 mg × 2 mL) / 20 mg ≈ 2.495 mL

Therefore,the dosage  of furosemide that will be received by the child is 2.5 mL

For more such questions on furosemide, click on:

https://brainly.com/question/14402120

#SPJ11

Charles's Law-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

Where:-

As per question, we are given that -

We are given the initial in °C.So, we first have to convert the temperature in Celsius to kelvin by adding 273-

[tex]\:\:\:\:\:\:\star\sf T_1[/tex] = 23+ 273 =296K

Now that we have obtained all the required values, so we can put them into the formula and solve for T₂ :-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{\dfrac{T_2}{V_2}=\dfrac{T_1}{V_1}}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=\dfrac{T_1}{V_1} \times V_2}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=\dfrac{296}{12} \times 52\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=24.66....... \times 52\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1282.66.........\:K\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=(1282.67 -273)°C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1009.66....\:°C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=1009.67\:°C}\\[/tex]

Therefore, If 12L of neon at 23 °C is allowed to expand to 52 L then the new temperature will become 1009.67°C or 1282.67K to maintain constant pressure.

Saltation is the skipping or bouncing motion of particles transported by running water. Saltation is a type of bedload transport in which small and medium-sized particles are lifted and moved downstream by the flow of water.

The particles that are involved in saltation are too large to be carried in suspension by the water, but too small to roll or slide along the streambed.

The term saltation comes from the Latin word "saltare," which means "to leap or dance." It is used to describe the movement of sediment particles that bounce and leap along the streambed. Saltation occurs when the velocity of the water is strong enough to lift particles from the streambed, but not strong enough to carry them in suspension.

In saltation, particles that are lifted from the streambed by the flow of water fall back to the bed after they lose momentum. This falling back to the bed causes the particles to bounce and leap along the bed in a zig-zag motion. Saltation can move sediment over a short distance, but it is an important process in stream erosion and sediment transport.

For more such questions on Saltation

brainly.com/question/14038711

#SPJ11

In comparison to the greater hydrogen bonding in ethanol, diethyl ether molecules are bound together by weak dispersion forces. As a result, one mole of diethyl ether takes less heat to vapourize than one mole of ethanol.

The vapour pressure of diethyl ether at these temperatures is more than 20 times that of water, indicating its volatility.

Diethyl Ether, CH3CH2OCH2CH3, is a highly flammable organic solvent that was also revealed to be one of the earliest anaesthetics. Because it boils at 34.6°C, just below the typical human body temperature, ether evaporates quickly. Since its vapour is denser than air, ether fumes tend to sink into the atmosphere.

learn more about diethyl ether

https://brainly.com/question/14690225

#SPJ1

The source of energy used to heat massive amounts of water to boiling temperature for steam can vary, depending on the specific context and application. However, some common sources of energy used for this purpose include: Fossil fuels, Nuclear energy, and Renewable energy.

Fossil Fuels: Coal, oil, and natural gas are commonly used as fuels to produce steam. They are burned to generate heat, which is then transferred to the water to increase its temperature.

Nuclear Energy: Nuclear power plants use the energy released by nuclear reactions to generate heat, which is then used to produce steam.

Renewable Energy: Renewable sources of energy such as solar, wind, geothermal, and hydroelectric power can also be used to produce steam. For example, solar thermal power plants use sunlight to heat a fluid, which is then used to generate steam.

The amount of energy required to heat massive amounts of water to boiling temperature for steam production depends on various factors, such as the volume of water being heated, the desired temperature, and the efficiency of the heating system.

To know more about boiling temperature here

https://brainly.com/question/22765691

#SPJ4

The ammonia gas's final temperature is 417.3 K. It moved from having a volume of 250 mL, a pressure of 3.84 atm, and a temperature of 35 oC to having a pressure of 5.84 atm and a volume of 215 mL.

To solve this problem, we can use the combined gas law, which states:

(P1 * V1) / (T1) = (P2 * V2) / (T2)

Where:

P1 = 3.84 atm

V1 = 250 mL

T1 = 35ºC + 273.15 = 308.15 K (temperature must be in Kelvin)

P2 = 5.84 atm

V2 = 215 mL

T2 = ?

We can rearrange this equation to solve for T2:

T2 = (P2 * V2 * T1) / (P1 * V1)

T2 = (5.84 atm * 215 mL * 308.15 K) / (3.84 atm * 250 mL)

T2 = 417.3 K

Therefore, the final temperature of the ammonia gas is 417.3 K.

Learn more about ammonia gas's here :

https://brainly.com/question/28204449

#SPJ1

Asteroids are real objects that are thought to be remnants of the solar system. Little, stony objects known as asteroids go around the Sun. Option D is correct.

Little, stony objects known as asteroids go around the Sun. They resemble planets but are smaller and frequently formed erratically. A variety of rocks make up the majority of them, although some also contain clay or metal.

Asteroids are rocky, airless leftovers from the early stages of the solar system's formation, which occurred around 4.6 billion years ago. They are also known as minor planets.

To know more about asteroids visit:-

https://brainly.com/question/27871303

#SPJ1

In the inductive step of a proof, you need to prove the statement that If P(k) is true and then P(k+1) is true.

In the induction process, a charged object is brought near but not touched to a neutral conducting object. The presence of a charged object near a neutral conductor will force (or induce) electrons within the conductor to move.

The method can be extended to prove statements about more general well-founded structures, such as trees; this generalization, known as structural induction, is used in mathematical logic and computer science. Mathematical induction in this extended sense is closely related to recursion. Mathematical induction is an inference rule used in formal proofs, and is the foundation of most correctness proofs for computer programs.

Visit here to learn more about the induction: https://brainly.com/question/18575018

#SPJ4

A chemical shift can be seen in this situation. As further proof that a chemical reaction is occurring, there may also be visible changes including bubbling, gas evolution, and heat emission.

Chemical reaction is the process by which 1 or more compounds, known as reactants, change into one or more new ones, known as products. Chemical components or compounds make up substances. The atoms that make up the reactants are rearranged in a chemical reaction to produce various products.

As moving molecules collide with one another, their connections are broken, resulting in an exchange in atoms that creates new products. Another way that substances can react chemically is by vibrating; if they vibrate vigorously enough, they can disintegrate into smaller molecules.

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ9

The correct statements about the structure of ATP are it contains three phosphoanhydride bonds (A), two phosphate ester bonds (B), the sugar moiety is linked to the triphosphate by a phosphate ester bond (C), the nitrogenous base is called adenosine (D), and the active form is usually in a complex with other molecules (E).

ATP is a nucleoside triphosphate that contains three phosphate groups. It is made up of a nucleotide molecule and three phosphate groups that are connected by high-energy bonds. ATP has a sugar backbone that is connected to the nitrogenous base adenosine and is attached to the phosphate groups. The high-energy bonds between the phosphates are referred to as phosphoanhydride bonds (option A).

The bond between the phosphate group and the sugar is a phosphate ester bond (option C), and two phosphate ester bonds are found in ATP (option B). The nitrogenous base in ATP is adenosine (option D). Finally, the active form of ATP is frequently complex with other molecules (option E). Therefore, options A, B, C, D, and E statements are correct.

Learn more about structure of ATP: https://brainly.com/question/13565194

#SPJ11

The change in mass of the anode and cathode in an electrochemical cell can be used to determine the amount of reactants that have been converted into products during the electrochemical reaction. Therefore, the concentration of the electrolyte solution may change during the course of the electrochemical reaction.

The amount of reactants consumed at the anode will be equal to the amount of products produced at the cathode. Therefore, the change in mass of the anode should be equal in magnitude but opposite in sign to the change in mass of the cathode.

For example, in a galvanic cell where zinc is oxidized at the anode and copper is reduced at the cathode, the mass of the anode will decrease as zinc atoms are converted to Zn²⁺ ions and electrons, while the mass of the cathode will increase as copper ions are reduced to copper atoms and gain electrons.

The amount of zinc consumed at the anode should be equal to the amount of copper produced at the cathode, and so the change in mass of the anode should be equal in magnitude but opposite in sign to the change in mass of the cathode.

To know more about cathode here

https://brainly.com/question/11920555

#SPJ4

--The given question is incorrect, the correct question is

"How does the change in mass of the anode compare with the change in mass of the cathode? what happens to the concentration."--

The client will receive 550 ml of fluid volume over a period of 10 hours if D5W is infusing at 55 gtt/min with a drop factor of 60 gtt/ml.

To calculate the fluid volume that the client will receive in 10 hours, we need to use the following formula:

Volume (in ml) = Flow rate (in gtt/min) x Time (in min) / Drop factor (in gtt/ml)

Given that the D5W solution is infusing at a rate of 55 gtt/min and the drop factor is 60 gtt/ml, we can plug in these values to the formula:

Volume (in ml) = 55 gtt/min x 600 min / 60 gtt/ml

Simplifying the equation, we get:

Volume (in ml) = 550 ml

To learn more about drop factor

https://brainly.com/question/8210596

#SPJ4

There are approximately [tex]2.88 * 10^{23}[/tex] atoms in 88.4 g of pure gold (Au).

The quantity of atoms, ions, or molecules contained in one mole of a substance is denoted by the fundamental constant known as Avogadro's number in chemistry and physics.

Tia can use Avogadro's number to determine how many atoms are contained in 88.4 g of pure gold (Au), which is approximately [tex]6.022 * 10^{23}[/tex] atoms/mol.

First, Tia has to determine the molar mass of gold (Au), which is 197 g/mol.

Then, she can use the following formula:

Number of atoms = (Mass of sample in grams) / (Molar mass of the element in grams/mol) * (Avogadro's number)

Plugging in the values:

Mass of sample = 88.4 g

Molar mass of gold (Au) = 197 g/mol

Avogadro's number [tex]= 6.022 * 10^{23}[/tex] atoms/mol

Number of atoms [tex]= (\frac{88.4}{197}) * (6.022 * 10^{23})[/tex]

Number of atoms [tex]= 2.88 * 10^{23}[/tex] atoms

Learn more about Avogadro's number here:

brainly.com/question/28812626

#SPJ4

The volume of oxygen consumed when 458 g of CH4 is combusted at STP is 1278.14 L.

What is STP?

STP stands for Standard Temperature and Pressure, which is a standard set of conditions used in chemistry and physics experiments. The standard temperature is 0 degrees Celsius or 273.15 Kelvin, while the standard pressure is 1 atmosphere or 101.3 kilopascals (kPa). At STP, one mole of any ideal gas occupies a volume of 22.4 liters (L). These standard conditions allow scientists to compare the properties of different gases under the same conditions, making it easier to make accurate measurements and predictions.

To find the volume of oxygen consumed during the combustion of methane, we need to use the balanced chemical equation and the ideal gas law.

First, let's find the number of moles of methane used:

Molar mass of CH4 = 12.01 + 4(1.01) = 16.05 g/mol

Number of moles of CH4 = 458 g / 16.05 g/mol = 28.53 mol

According to the balanced chemical equation, one mole of CH4 reacts with two moles of O2, so we need:

28.53 mol CH4 × 2 mol O2/1 mol CH4 = 57.06 mol O2

At STP (standard temperature and pressure), one mole of any ideal gas occupies 22.4 L of volume. Therefore, the volume of oxygen consumed is:

57.06 mol O2 × 22.4 L/mol = 1278.14 L

Learn more about STP from the given link

https://brainly.com/question/2783971

#SPJ1

It would take 1,127.7 kJ of thermal energy to change 500g of water from liquid phase to vapor phase at a constant temperature and pressure, assuming the theoretical heat of vaporization of water.

To calculate the amount of thermal energy required to change 500g of water from liquid phase to vapor phase, we need to use the heat of vaporization (also called enthalpy of vaporization) of water, which is the amount of energy required to convert one mole of liquid water to water vapor at a constant temperature and pressure.

The heat of vaporization of water is given as 40.65 kJ/mol. To calculate the energy required to vaporize 500g of water, we need to first calculate the number of moles of water present in 500g of water:

Number of moles of water = mass of water / molar mass of water

Number of moles of water = 500g / 18.02 g/mol

Number of moles of water = 27.74 mol

Now, we can use the following formula to calculate the amount of thermal energy required:

Energy = Number of moles x Heat of vaporization

Energy = 27.74 mol x 40.65 kJ/mol

Energy = 1,127.7 kJ

learn more about  molar mass here:

https://brainly.com/question/22997914

#SPJ1

Phosphorus pentafluoride is not an ionic compound. Option A is correct.

Phosphorus pentafluoride (PF₅) is a covalent compound composed of one phosphorus atom and five fluorine atoms. It is a colorless, toxic, and reactive gas that is used in various chemical reactions and as a reagent in the synthesis of other chemical compounds.

The PF₅ molecule has a trigonal bipyramidal shape, with the phosphorus atom at the center and the five fluorine atoms arranged around it. The molecule has a dipole moment and is polar, which makes it soluble in polar solvents such as water.

An ionic compound is a type of chemical compound that is formed by the attraction of positively and negatively charged ions. In an ionic compound, one or more atoms will lose electrons to form a positively charged ions known as cations, while one or more atoms gain electrons to form negatively charged ions known as anions.

Hence, A. is the correct option.

To know more about ionic compound here

https://brainly.com/question/9167977

#SPJ4

--The given question is incomplete, the complete question is

"Which compound name does not correspond to an ionic compound? select one: A) phosphorus pentafluoride B) silver iodide C) magnesium bromide D) molybdenum(v) chloride."--

He notices a rise in the water's temperature from 10.0°C to 18.0°C in total. The metal cube's final temperature is 69.04°C.

Q = mcT, where Q is the heat dissipated by the cube, m is its mass, c is its specific heat, and T is its change in temperature.

The formula for the energy the water gains is Q = mcT.

mcT = mcT (cube) (water)

When we solve for the cube's final temperature, we obtain:

Tcube = (m cube c cube) / (m water c water)

Tcube is equal to (18.0°C - 10.0°C) 1 kg times 4182 J/kg°C and 1 kg times 375 J/kg°C

Tcube equals 0.96 °C

Final temperature: 70 °C minus 0.96 °C equals 69.04 °C.

To learn more about final temperature visit:

brainly.com/question/11244611

#SPJ1

First, we'll look at the ideal gas equation,

PV = nRT

The temperature and pressure are said to be constant; Additionally, R is a constant already. Along these lines, we get:

V = constant * n

The direct proportional equation is as follows: As a result, we get:

V/n = constant

V₁/n₁ = V₂/n₂

Replace V₂ with the qualities and address.

V₂ = (4 * 1.48) / 0.864

V₂ = 6.85

In the end, 6.85 Liters of gas must be present, so we must add:

6.85 - 4 = 2.85 liters

The volume of a gas is directly proportional to its mole volume at a fixed temperature and pressure.

To learn more about ideal gas here

https://brainly.com/question/28257995

#SPJ4

Q- At 4.00 L, an expandable vessel contains 0.864 mol of oxygen gas. How many liters of oxygen gas must be added at constant temperature and pressure if you need a total of 1.48mol of oxygen gas in the vessel?

(S)-2-aminobutane could be used as a resolving agent for a racemic carboxylic acid.

To be used as a resolving agent, an amine must be able to form a diastereomeric salt with the racemic carboxylic acid. This salt can then be separated into its enantiomeric forms using conventional separation techniques. The key is to find an amine that will selectively react with one enantiomer of the carboxylic acid and not the other.

Out of the amines shown, only (S)-2-aminobutane has a chiral center and is therefore capable of forming diastereomeric salts with a racemic carboxylic acid. The other amines are achiral and would not be able to differentiate between the enantiomers of the carboxylic acid.

When an amine is used as a resolving agent for a racemic carboxylic acid, it reacts with the acid to form a diastereomeric salt. This salt can be separated into its enantiomeric forms using conventional separation techniques such as recrystallization or chromatography. The key is to find an amine that will selectively react with one enantiomer of the carboxylic acid and not the other.

learn more about amines here:

https://brainly.com/question/28167507

#SPJ4

Answer:

B, C, D, F, I

Explanation:

A covalent bond is a chemical bond between two nonmetals (their electronegativity difference must be greater than 1.5-1.6)

.

A. Ca is a metal and O is nonmetal, so the bond in CaO is ionic

B. Both H and Cl are nonmetals, so the bond in HCl is covalent

C. Both C and O are nonmetals, so the bond in CO2 is covalent

D. Both S and O are nonmetals, so the bond in SO2 is covalent

E. Na is a metal and O is nonmetal, so the bond in Na2O is ionic

F. Both P and Cl are nonmetals, so the bond in PCl3 is covalent

G. Mg is a metal and O is nonmetal, so the bond in MgO is ionic

H. Na is a metal and H is nonmetal, so the bond in NaH is ionic

I. Both C and H are nonmetals, so the bond in CH2 is covalent

Answer:7 at 25 °C

Explanation:

but when exposed to the carbon dioxide equilibrium results in a pH of approximately 5.2 because CO2 in the air dissolves in the water and forms carbonic acid.

Answer:

The pH of pure water (H20) is 7 at 25 °C,

Explanation:

Hope this helps!!

Mark me brianliest :))

The emulsifying agent in the given context  is " the oil in mayonnaise."

An emulsifying agent is a substance that stabilizes emulsions by reducing the surface tension between the two phases, such as oil and water. In the context of mayonnaise, oil is the emulsifying agent that binds oil and vinegar or lemon juice into a stable suspension.

The oil in mayonnaise is responsible for the smooth texture and consistent thickness of the condiment. Without the emulsifying action of oil, the vinegar or lemon juice would separate from the oil and create an unpleasant, lumpy texture.

Therefore, the oil in mayonnaise is the correct answer as an emulsifying agent in the given context.

For more question on emulsions

https://brainly.com/question/6677364

#SPJ11

The concentration of the HCl solution is 0.148 M.

The concentration of a solution is typically measured in moles per liter (M). We can calculate the concentration of HCl in the given solution as follows:

Concentration (M) = moles of solute/volume of solution (in liters)

We are given that the solution contains 0.0074 moles of HCl in 0.05 liters of solution. Plugging these values into the equation above, we get:

Concentration (M) = 0.0074 mol / 0.05 L

Concentration (M) = 0.148 M

The concentration of the HCl solution is 0.148 M.

A mole is a measurement used to quantify a substance's quantity. A material is said to have one mole if there are the same number of its constituent parts (such as atoms, molecules, or ions) in it as there are 12 grams of carbon-12.

Because they help us connect a substance's bulk to the number of particles it contains, moles are crucial in the study of chemistry. The mass in grams of one mole of a material, for instance, is known as its molar mass.

learn more about moles here

https://brainly.com/question/29367909

#SPJ1