1/2 (7)(4) + 6(5)=

I can not figure this out! Can you answer with middle school techniques?

The total interest on a 20-year, 5.26% loan with a principal of $50,000 is $52,600.

From the information,

Principal: $50,000

Interest rate: 5.26%

Loan duration: 20 years

Total Interest = (Principal x Interest Rate x Loan Duration) / 100

Plugging in the values we have, we get:

Total Interest = (50,000 x 5.26 x 20) / 100

Total Interest = $52,600

The interest is $52600.

Leans more about interest on

https://brainly.com/question/25793394

#SPJ1

The location of point B is (4, −2). So the answer is (4, −2).

To find the location of point B, we can use the midpoint formula, which states that the coordinates of the midpoint of a line segment with endpoints (x1, y1) and (x2, y2) are:

((x1 + x2)/2, (y1 + y2)/2)

In this case, we know that point M is the midpoint of segment AB, and we know the coordinates of point M. We also know the coordinates of point A. So we can use the midpoint formula to solve for the coordinates of point B.

Let's call the coordinates of point B (x, y). We know that point M is the midpoint of segment AB, so we can set up the following equation:

((−2 + x)/2, (2 + y)/2) = (1, 0)

Simplifying this equation, we get:

(−2 + x)/2 = 1 and (2 + y)/2 = 0

Solving for x and y, we get:

x = 4 and y = −2

Therefore, the location of point B is (4, −2). So the answer is (4, −2).

Learn more about the location

brainly.com/question/11718756

#SPJ11

The radius of the cylinder with volume of 141.3and height of 7 cm is 2.53cm.

The formula for the volume of a cylinder is V = πr²h, where r is the radius and h is the height. Given that V = 141.3 cm³ and using π ≈ 3.14, we can solve for r.

Rearranging the formula, we get r² = V/(πh), and plugging in the given values, we get r² = 141.3/(3.14*7). Since we don't know the height of the cylinder, we cannot solve for r exactly.

However, we can say that the radius of the cylinder is proportional to the square root of the volume, the height is 7 cm, then r = √(141.3/3.14*7) ≈  2.53cm. If the height is different, the radius will change accordingly.

In summary, using the formula for the volume of a cylinder andheight of 7 cm, the radius of the cylinder with volume 141.3 cm³ and using π ≈ 3.14 is approximately 2.53 cm.

To know more about volume of a cylinder click on below link:

https://brainly.com/question/16788902#

#SPJ11

Complete question:

The volume of the cylinder is 141. 3 cubiccentimeters. What is the radius of the cylinder given that height is 7cm? use  π ≈ 3.14

The expression that gives the length of the rectangular prism in feet is option D: 27/(2x^2+100).

The volume of a rectangular prism is given by the formula V = lwh, where l is the length, w is the width, and h is the height.

We are given that the volume of the rectangular prism is 135ft^3, and the width is (2x+10)ft. Also, the height is 5 times the width, so h = 5w.

Substituting these values in the formula for the volume, we get:

135 = l(2x+10)(5w)

Dividing both sides by (2x+10)(5w), we get:

l = 135 / (2x+10)(5w)

l = 135 / [10(x+5)w]

Now we can substitute h = 5w:

l = 135 / [10(x+5)h/5]

l = 135 / [2(x+5)h]

l = 135 / [2(x+5)(5w)]

l = 135 / [10(x+5)^2]

Simplifying the expression, we get:

l = 27 / (2(x+5)^2)

Therefore, the expression that gives the length of the rectangular prism in feet is option D: 27/(2x^2+100).

Learn more about rectangular prism in feet

brainly.com/question/30956442

#SPJ11

The standard deviation for the prices paid for this particular model of car is $6,250.

Based on the figure you provided, we know that the data is normally distributed and approximately 68% of car buyers pay within one standard deviation of the mean, approximately 95% pay within two standard deviations, and approximately 99.7% pay within three standard deviations.

Since we know that 95% of the prices paid fall within two standard deviations of the mean, we can say that the distance between the mean and the upper or lower limit of this range is equal to two standard deviations. This is also known as the "95% confidence interval."

Therefore, to find the standard deviation, we can calculate the distance between the mean and either the upper or lower limit of the 95% confidence interval and then divide it by two.

From the figure, we can see that the 95% confidence interval extends from approximately $23,500 to $48,500. The midpoint of this interval is approximately $36,000, which we can take as the mean.

So, the distance between the mean and either end of the 95% confidence interval is:

$48,500 - $36,000 = $12,500

Dividing this by two gives us the standard deviation:

$12,500 / 2 = $6,250

Therefore, the standard deviation for the prices paid for this particular model of car is $6,250.

Learn more about standard deviation

brainly.com/question/23907081

#SPJ11

There are 36 students in Ms. Oaks' class. The number of students who wear each type of item is: Glasses: 15 students, Earrings: 8 students, Hats: 4 students and Watch: 9 students

Let the total number of students in Ms. Oaks' class be x.

a) We know that 2/18 of the students wear hats, which is equivalent to 1/9 of the students. We are also told that 4 students wear hats. So, we can set up an equation:

1/9 * x = 4

Solving for x, we get:

x = 36

Therefore, there are 36 students in Ms. Oaks' class.

b) We can now use the information given to determine how many students wear each type of item.

- Glasses: 5/12 of the students wear glasses, which is equivalent to:

(5/12) * 36 = 15 students

- Earrings: 2/9 of the students wear earrings, which is equivalent to:

(2/9) * 36 = 8 students

- Hats: We are told that 4 students wear hats.

- Watch: 1/4 of the students wear a watch, which is equivalent to:

(1/4) * 36 = 9 students

Therefore, the number of students who wear each type of item is:

Glasses: 15 students

Earrings: 8 students

Hats: 4 students

Watch: 9 students

To know more about number, visit:

https://brainly.com/question/12816397#

#SPJ11

Kadeesha would have approximately $1187.80 in the account 11 years after her initial investment.

We can use the formula for compound interest to solve this problem. The formula is given by:

A = P(1 + r/n)^(nt)

where A is the amount after t years, P is the principal amount, r is the annual interest rate (as a decimal), n is the number of times the interest is compounded per year, and t is the number of years.

In this case, P = $900, r = 0.015, n = 1 (since interest is compounded annually), and t = 11. Plugging these values into the formula, we get:

A = $900(1 + 0.015/1)^(1*11) = $1187.7989

Rounding this to the nearest tenth, we get $1187.80. Therefore, Kadeesha would have approximately $1187.80 in the account 11 years after her initial investment.

For more questions like Investment click the link below:

https://brainly.com/question/15105766

#SPJ11

If John bought stock for $350 then A year later, he sold it for $385. So John's Return on investment is 10%.

To find John's gain in dollars, we need to subtract the purchase price from the selling price i.e. Gain = Selling price - The purchase price. So John's Return on investment is 10%.

Gain = $385 - $350

Gain = $35

So John's gain in dollars is $35.

To find John's return on investment (ROI), we need to use the formula:

ROI = (Gain / Investment) x 100%

We already know the gain is $35, and the investment is $350. Substituting these values into the formula, we get:

ROI = ($35 / $350) x 100%

ROI = 0.1 x 100%

ROI = 10%

So John's Return on investment is 10%. Rounded to the nearest whole percent, the answer is also 10%.

To learn more about “return on investment” refer to the https://brainly.com/question/11913993

#SPJ11

Answer:

Step-by-step explanation:

At point (3, 9), the rate of change of temperature with respect to the x-axis is -4.2 °C/m, and with respect to the y-axis, it is -23.4 °C/m.

To find the rates of change of the temperature with respect to the distances moved along the x- and y-axes at point (3, 9), you need to compute the partial derivatives of the temperature function T(x, y) = 900 - 0.7x^2 - 1.3y^2 with respect to x and y.
For the x-axis:
∂T/∂x = -1.4x
At point (3, 9), ∂T/∂x = -1.4(3) = -4.2 °C/m
For the y-axis:
∂T/∂y = -2.6y
At point (3, 9), ∂T/∂y = -2.6(9) = -23.4 °C/m
So, at point (3, 9), the rate of change of temperature with respect to the x-axis is -4.2 °C/m, and with respect to the y-axis, it is -23.4 °C/m.

Learn more about the rate of change of temperature here: brainly.com/question/29754488

#SPJ11

Answer: 8.9

Step-by-step explanation:

This is pythagoras.

[tex]a^{2} + b^{2} = c^{2}\\6.4^{2} + 6.2^{2} = c^{2}\\40.96 + 38.44 = 79.4\\\sqrt{79.4} = 8.91066776398[/tex]

8.91066776398 = 8.9 (nearest tenth)

The value of P from the formula  I= PRT/100 when I = 20, R= 5 and T= 4 is 100.The formula I = PRT/100 is used to calculate the simple interest on a principle amount, where P is the principle amount, R is the interest rate, and T is the time period.

To find the value of P from the formula I = PRT/100 when I = 20, R = 5, and T = 4,

Therefore the value of P is 100.

To learn more about value : https://brainly.com/question/843074

#SPJ11

The technician will bill a total of 150 hours to the job. To find the total hours, we need to determine how many hours the technician will work during the first three weeks and the last three weeks, and then add them together.

1. First three weeks:

The technician will be 25% billable during these weeks. They work 40 hours per week, so we need to calculate 25% of 40 hours for each week:

25% of 40 hours = 0.25 * 40 = 10 hours per week

Since there are three weeks, we'll multiply these hours by 3:
10 hours/week * 3 weeks = 30 hours

2. Last three weeks:

The technician will be 100% billable during these weeks. They work 40 hours per week, so they'll bill 40 hours for each of these weeks:
40 hours/week * 3 weeks = 120 hours

3. Finally,

we need to add the hours from the first and last three weeks together to find the total hours the technician will bill to the job:
30 hours (first three weeks) + 120 hours (last three weeks) = 150 hours

The technician will bill a total of 150 hours to the job.

To know more about  technician will bill refer here:

https://brainly.com/question/14290207#

#SPJ11

Answer:

[tex]x^2+\left(y+\dfrac{1}{2}\right)^2=\dfrac{49}{4}[/tex]

Step-by-step explanation:

The center of the circle is the midpoint of its diameter.

[tex]\boxed{\begin{minipage}{7.4 cm}\underline{Midpoint between two points}\\\\Midpoint $=\left(\dfrac{x_2+x_1}{2},\dfrac{y_2+y_1}{2}\right)$\\\\\\where $(x_1,y_1)$ and $(x_2,y_2)$ are the endpoints.\\\end{minipage}}[/tex]

Given the endpoints of the diameter are (0, 3) and (0, -4), to find the coordinates of the center of the circle, substitute the two endpoints into the midpoint formula:

[tex]\text{Center}=\left(\dfrac{0+0}{2},\dfrac{-4+3}{2}\right)=\left(0,-\dfrac{1}{2}\right)[/tex]

As the x-values of the endpoints of the diameter are the same, the length of the diameter, d, is the absolute value of the difference in y-values of the endpoints:

[tex]d=|3-(-4)|=7[/tex]

Therefore, the diameter of circle Q is 7 units.

The radius, r, of a circle is half its diameter. Therefore:

[tex]r=\dfrac{d}{2}=\dfrac{7}{2}[/tex]

[tex]\boxed{\begin{minipage}{4 cm}\underline{Equation of a circle}\\\\$(x-h)^2+(y-k)^2=r^2$\\\\where:\\ \phantom{ww}$\bullet$ $(h,k)$ is the center. \\ \phantom{ww}$\bullet$ $r$ is the radius.\\\end{minipage}}[/tex]

Now we have determined the center and radius of circle Q, we can substitute these values into the equation of a circle to write the equation of circle Q in standard form:

[tex](x-0)^2+\left(y-\left(-\dfrac{1}{2}\right)\right)^2=\left(\dfrac{7}{2}\right)^2[/tex]

[tex]x^2+\left(y+\dfrac{1}{2}\right)^2=\dfrac{49}{4}[/tex]

Therefore, the equation of circle Q in standard form is:

[tex]\boxed{x^2+\left(y+\dfrac{1}{2}\right)^2=\dfrac{49}{4}}[/tex]

To find the slope of the secant line connecting two points on a curve, we can use the formula: slope of secant line = (change in y) / (change in x).

In this problem, we are given the function f(x) = x^3 - 5x on the closed interval [-1, 3), and we need to find the slope of the secant line connecting (-1, f(-1)) and (3, f(3)). To do this, we first need to find the y-coordinates of these points by plugging the given x-values into the function f(x). Then, we can use the formula for the slope of a secant line to find the slope of the line connecting these two points.

The slope of a secant line is an important concept in calculus and is used to approximate the instantaneous rate of change of a function at a particular point.

For more similar questions on topic Secant lines.

https://brainly.com/question/7513459

#SPJ11

The maximum profit is $3,900 if the marginal cost and marginal revenue are given by C'(x) = 20+ x/20 and R'(x) = 40 and fixed cost is $100.00.

In order to determine the maximum profit, we need to find the quantity (x) where the marginal cost (C'(x)) equals the marginal revenue (R'(x)). This is because when these two values are equal, we are maximizing the profit. The given functions are:

C'(x) = 20 + x/20
R'(x) = 40

First, set the marginal cost equal to the marginal revenue:

20 + x/20 = 40

Now, we need to solve for x:

x/20 = 40 - 20
x/20 = 20
x = 20 * 20
x = 400

So, the maximum profit occurs at a quantity of 400 units. To find the total cost (C(x)) and total revenue (R(x)), we need to integrate the marginal cost and marginal revenue functions:

C(x) = ∫(20 + x/20) dx = 20x + x^2/40 + C₁
R(x) = ∫40 dx = 40x + C₂

Since we have a fixed cost of $100, we know that C₁ = 100. We don't need C₂ to find the profit, as it will cancel out when we calculate it. Now, let's find the total cost and total revenue for 400 units:

C(400) = 20(400) + (400)^2/40 + 100 = 8000 + 4000 + 100 = 12100
R(400) = 40(400) = 16000

Finally, calculate the profit (P(x)):

P(x) = R(x) - C(x) = 16000 - 12100 = 3900

Therefore, the maximum profit is $3,900 when producing 400 units.

To know more about maximum profit refer here:

https://brainly.com/question/8424036

#SPJ11

If the slope is defined as the change in the dependent variable (y) divided by the change in the independent variable (x), then the slope would depend on how the dependent variable and independent variable are measured.

Assuming that the dependent variable y is some form of economic outcome (e.g., consumption, savings, investment) and the independent variable x is income, then the slope of the relationship would depend on the units in which income is measured.

If income is measured in thousands of dollars, then a one-unit change in income would correspond to a $1,000 change. Therefore, the slope would reflect the change in the economic outcome associated with a $1,000 change in income.

Learn more about  dependent variable

https://brainly.com/question/29430246

#SPJ4

The image of  WXYZ moves two unit to the right and 5 unit down. The coordinate is (x+2, y-5).

The polar system of coordinates is a coordinate system with two dimensions in which the location of each point can be determined by its distance from the origin, a fixed point, and its angle from the polar axis, also known as the polar axis of rotation. A ray beginning at the origin and extending outward at a set angle, typically 0 degrees or horizontal, is how the polar axis is typically depicted. The image of  WXYZ moves two unit to the right and 5 unit down. The coordinate is (x+2, y-5).

To know more about coordinate, here:

https://brainly.com/question/16634867

#SPJ1

0.626 liters of water is needed to fill the container to its brim.

The volume of the rectangular container can be found by multiplying the area of the base (length x width) by the height:

Volume of rectangular container = length x width x height

Since the base is a square with a side of 12 cm, the area of the base is:

Area of base = 12 cm x 12 cm = 144 cm^2

Converting the height to cm, we have:

Height = 16.5 cm

So the volume of the container is:

Volume = 144 cm^2 x 16.5 cm = 2376 cm^3

To convert the volume from cubic centimeters to liters, we divide by 1000:

Volume = 2376 cm^3 ÷ 1000 = 2.376 liters

Since there is already 1.75 liters of water in the container, the amount of water needed to fill the container to its brim is:

Amount of water needed = 2.376 liters - 1.75 liters = 0.626 liters

Therefore, 0.626 liters of water is needed to fill the container to its brim.

To learn more about height, click here:

https://brainly.com/question/10726356

#SPJ11

A smaller MAD indicates less variability in the data set, while a larger MAD indicates greater variability.

The mean absolute deviation (MAD) is a measure of the variability of a set of data. It measures the average distance between each data point and the mean of the data set.

In this case, the MAD of Mr. Zimmerman's class is 0.46. This means that, on average, each data point in the class is about 0.46 units away from the mean of the data set.

The MAD gives an idea of how spread out the data is from the mean, regardless of whether the data is positively or negatively deviated from the mean.

A smaller MAD indicates less variability in the data set, while a larger MAD indicates greater variability.

To know more about mean absolute deviation, refer here:

https://brainly.com/question/4364130#

#SPJ11

The charge for the companies is the same at 500 minutes

From the question, we have the following parameters that can be used in our computation:

This means that

A(x) = 50 + 0.05x

B(x) = 0.15x

When the charge for the companies are the same, we have

0.15x = 50 + 0.05x

So, we have

0.1x = 50

Divide

x = 500

Hence, the number of minutes is 500

Read more about linear relation at

https://brainly.com/question/30318449

#SPJ1

The financing option that will likely lead to the lowest monthly payment is:

$3000 down payment, 6% interest, 84 months

The longer loan term (84 months) will spread out the payments over a longer period of time, resulting in a lower monthly payment. The down payment will also help to reduce the monthly payment amount.

The 6% interest rate is relatively low, so it won't have a significant impact on the monthly payment compared to the loan term.

To know more about financing refer here

https://brainly.com/question/30502952#

#SPJ11

Answer:

Approx 67.24%

Step-by-step explanation: If the Atlanta Hawks' free-throw percentage is 82%, the probability that a player will make one free throw is 0.82.

To find the probability that a player will make two free throws in a row, we can use the multiplication rule of probability which states that the probability of two independent events occurring together is the product of their individual probabilities.

Therefore, the probability of a player making two free throws in a row can be calculated as follows:

P(making two free throws in a row) = P(making first free throw) x P(making second free throw)

P(making two free throws in a row) = 0.82 x 0.82

P(making two free throws in a row) = 0.6724 or 67.24%

Therefore, the probability that a player for the Atlanta Hawks will make two free shots in a row is approximately 67.24%

The required answer to the algebraic fraction [ {(5)/(6)}a + 4 {(1)/(4)}a ] is [ {(11)/(6)}a ] .

We can simplify this algebraic fraction problem by simple rule of fraction addition and with application LCM rule as,

{(5)/(6)}a + 4 {(1)/(4)}a

= {(5)/(6)}a + (1)a

= [{ (5)+ (6) }/(6)]a

= {(11)/(6)}a

The LCM (or, Least Common Multiple) rule is used for the two algebraic fraction here as the value that is divisible by the two given numbers in the denominator of the algebraic fractions. Then by rule, the numerators are multiplied by the factor of LCM of the denominator and then the numerators are added.

To know more about algebraic fractions here

https://brainly.com/question/11875858

#SPJ4

Part A: To convert the mixed fraction 5 9/17 to an improper fraction, we first multiply the whole number (5) by the denominator of the fraction (17), and then add the numerator (9). This gives us:

5 x 17 + 9 = 94

So 5 9/17 as an improper fraction is 94/17.

Part B: To find the decimal equivalent of 94/17, we divide the numerator (94) by the denominator (17) using a calculator or long division. The answer is approximately 5.53 when rounded to two decimal places.

Therefore, the decimal equivalent of the improper fraction 94/17 approximated to two decimal places is option B: 5.535.

The stairs can be broken up into three rectangular prisms

The concrete that will be needed to form the stairs is 9.72 m ^3

To get the volume of concrete

Since they are 3

2.7 / 3

= 0.9

1.5 / 3

= 0.5

0.5 + 0.5

= 1

each width is 3.6m

The volume of each = 0.9 x 1.5 x 3.6 = 4.86

Volume 2 = 0.9 x 1.0 x 3.6 = 3.24

Volume 3 = 0.9 x 0.5 x 3.6 = 1.62

amount of concrete = 1.62 + 3.24 + 4.86

= 9.72 m ^3

Read more on volume here:https://brainly.com/question/1972490

#SPJ1

Answer:

1)55,44

2)6,4

3)49,8

4)11,7

5)12,444

6)23,04

7)12,46

8)15,06

9)31,68

10)30,4

Step-by-step explanation:

Recheck them and make sure there are no mistakes

The new price per share is $111.48.

Stock price is the current market value of a share of a publicly traded company's stock. It represents the price at which buyers and sellers agree to trade shares in the open market. Stock prices are determined by a variety of factors, including the company's financial performance, industry trends, and overall market conditions. The stock price is often used as an indicator of investor sentiment about the company and its future prospects.

To find the new price per share, follow these steps:

1. Note the initial stock price: $109.99
2. Note the increase in stock price: $1.49
3. Add the increase to the initial stock price: $109.99 + $1.49 = $111.48

The new price per share is $111.48.

Learn more about share,

https://brainly.com/question/25818989

#SPJ11

The advertisement generates the maximum rate of growth of car sales on the first day.

The rate of growth of sales is given by the derivative of N(t) with respect to time t:

dN/dt = 72t

To find the day when the maximum rate of growth of sales occurs, we need to find the value of t that maximizes this expression.

Setting dN/dt = 0, we get:

72t = 0

t = 0

However, since we are interested in finding the day when the maximum rate of growth of sales occurs, we need to consider the second derivative of N(t):

d2N/dt2 = 72

Since this is a positive constant, it tells us that N(t) is a convex function and has a minimum value at t = 0. Therefore, the maximum rate of growth of sales occurs on the day when t = 0, which corresponds to the first day of the advertisement.

Answer: 1. on day 12

Learn more about maximum growth rate.

brainly.com/question/29217326

#SPJ11