A car travelling at 35. 0 km / hr speeds up to 45 km/hr in a time of 5.00 s. The same car later speeds up from 65 km / hr to 75 km/hr in a time of 5. 00 sec.
a. To calculate the magnitude of acceleration, we can use the formula
a = (Vf - Vi) / t
Where a is the acceleration, Vf is the final velocity, Viis the initial velocity, and t is the time taken.
For the first interval, Vi = 35 km/hr = 9.72 m/s, Vf = 45 km/hr = 12.5 m/s, and t = 5.00 s.
So, a = (12.5 - 9.72) / 5.00 = 0.556 m/[tex]s^{2}[/tex]
For the second interval, Vi = 65 km/hr = 18.1 m/s, Vf = 75 km/hr = 20.8 m/s, and t = 5.00 s.
So, a = (20.8 - 18.1) / 5.00 = 0.540 m/[tex]s^{2}[/tex]
b. To calculate the distance traveled by the car during each time interval, we can use the formula
d =Vit + 1/2a[tex]t^{2}[/tex]
Where d is the distance traveled, vi is the initial velocity, a is the acceleration, and t is the time taken.
For the first interval, vi = 9.72 m/s, a = 0.556 m/[tex]s^{2}[/tex], and t = 5.00 s.
So, d = (9.72)(5.00) + [tex]1/2(0.556)(5)^{2}[/tex] = 66.8 m
For the second interval, vi = 18.1 m/s, a = 0.540 m/[tex]s^{2}[/tex], and t = 5.00 s.
So, d = (18.1)(5.00) + [tex]1/2 (0.540)(5)^{2}[/tex] = 128.3 m
Therefore, the distance traveled by the car during the first interval is 66.8 m, and during the second interval is 128.3 m.
To know more about speeds here
https://brainly.com/question/22109908
#SPJ4
most people have known since elementary school that the north pole of one magnet is attracted to the south pole of another magnet. it is also commonly known that the needle of a compass is itself a magnet. a photo of a compass. in view of this, explain why the north pole of the compass needle seems to be attracted to the north pole of the planet earth.
This is the reason the compass needle, despite having a north-seeking magnet, points in the direction of the geographic north pole.
Hi! The phenomenon you're referring to can be explained through the concepts of magnetism and Earth's magnetic field. Although it may seem that the north pole of a compass needle is attracted to the Earth's north pole, it's actually attracted to the magnetic south pole of the planet.
This attraction occurs because the Earth itself acts as a giant magnet, generating a magnetic field with poles that are approximately aligned with the geographic poles. The Earth's magnetic south pole is near the geographic north pole, and the magnetic north pole is near the geographic south pole.
As you mentioned, the needle of a compass is a magnet with its own north and south poles. According to the laws of magnetism, opposite poles attract each other.
Consequently, the north pole of the compass needle is attracted to the magnetic south pole of the Earth, which is near the geographic north pole. This is why the compass needle points towards the geographic north pole, despite it being a north-seeking magnet.
To learn more about : magnet
https://brainly.com/question/26257705
#SPJ11
Lab: Newton's Laws of Motion
Assignment: Lab Report
--------------
I finished and wanted to give my lab report if anyone had trouble or needed it :)
Thank you for offering your lab report to others! However, it's important to remember that sharing your work can lead to academic misconduct if others use your report as their own.
It's important for everyone to complete their assignments independently and to not share their work with others.
It's also important to understand the concepts behind Newton's Laws of Motion rather than relying solely on someone else's report.
That being said, if anyone is struggling with the lab, it's best to seek help from the instructor or a tutor. Good luck with your assignment!
To know more about academic misconduct refer here
https://brainly.com/question/25160479#
#SPJ11
How does the freezing method work when separating engine oil from water?
The freezing method works by exploiting the difference in freezing points between engine oil and water. However, its effectiveness may vary depending on the properties and composition of the mixture.
The freezing method for separating engine oil from water is based on the difference in freezing points between the two substances. Water has a higher freezing point than most engine oils, which means that when a mixture of oil and water is cooled to a temperature below the freezing point of water, the water will freeze while the oil remains in liquid form.
To use this method, the mixture is first placed in a container and then put in a freezer or other cooling device. As the temperature drops, the water in the mixture will begin to freeze, forming ice crystals. These can then be removed by either skimming them off the surface or pouring off the liquid oil, which should be separated from the frozen water.
It's worth noting that this method is not always effective, as some engine oils may have a higher freezing point than water, making it difficult to separate them using this technique. Additionally, it may not be suitable for larger quantities of oil and water or for more complex mixtures containing other substances.
To learn more about the freezing method
https://brainly.com/question/10951121
#SPJ4
A uniform solid 5. 25-kg cylinder is released from rest and rolls without slipping down an inclined plane inclined at 18° to the horizontal. How fast is it moving after it has rolled 2. 2 m down the plane?.
The cylinder is moving at a speed of 2.12 m/s after it has rolled 2.2 m down the incline.
We can use conservation of energy to solve this problem. The initial potential energy of the cylinder is converted into kinetic energy as it rolls down the incline. At the bottom of the incline, the kinetic energy is equal to the potential energy it had at the top, neglecting any energy losses due to friction.
Let's begin by finding the potential energy of the cylinder at the top of the incline. The height of the incline can be found using trigonometry:
h = (2.2 m)sin(18°) = 0.667 m
The potential energy of the cylinder at the top of the incline is:
PE = mgh = (5.25 kg)(9.81 m/s²)(0.667 m) = 34.2 J
At the bottom of the incline, the kinetic energy of the cylinder is equal to its potential energy at the top:
KE = 34.2 J
The kinetic energy of a rolling cylinder is given by:
KE = (1/2)mv² + (1/2)Iω²
where m is the mass of the cylinder, v is its velocity, I is its moment of inertia, and ω is its angular velocity. For a cylinder rolling without slipping, we have:
v = ωR
where R is the radius of the cylinder. The moment of inertia of a solid cylinder about its central axis is:
I = (1/2)mr²
Substituting these expressions into the equation for kinetic energy and simplifying, we get:
KE = (1/2)mv² + (1/4)mv²
Solving for v, we find:
v = sqrt(8KE/3m)
Substituting in the values we found above, we get:
v = sqrt(8(34.2 J)/(3(5.25 kg))) = 2.12 m/s
To know more about conservation of energy refer here
https://brainly.com/question/13949051#
#SPJ11
During practice a soccer player kicks a ball and sends it rolling across the grass. Over a short distance the ball slows down and stops which two statements support the idea that energy is conserved in this example? Please Hurry
Energy cannot be created or destroyed, it can only be converted from one form to another. When the soccer player kicked the ball, they transferred their kinetic energy to the ball, causing it to move.
As the ball rolled across the grass, its kinetic energy was gradually converted into other forms of energy, such as frictional heat and sound energy, causing it to slow down and eventually stop.
The total amount of energy in a closed system remains constant. In this case, the system is the ball and the grass.
Even though the ball slowed down and stopped, the total amount of energy in the system remained the same, as the kinetic energy of the ball was converted into other forms of energy, such as heat and sound. Therefore, energy was conserved in this example.
To know more about kinetic energy, refer here:
https://brainly.com/question/26472013#
#SPJ11
what is moment of force(torque)?on what factor it depends?explain briefly
Answer:
it's the turning effect of force; the product of force and perpendicular distance from line of action of the force to the pivot . Depends on two factors: size of force applied and perpendicular distance from pivot to line of action of the force
Co-efficient of volume expansion of
aluminium
The coefficient of volume expansion of a material is a measure of how much its volume changes with a change in temperature. For aluminium, the coefficient of volume expansion is approximately [tex]7.1 \times 10^{-5}[/tex] per degree Celsius ([tex]K^{-1}[/tex]).
For aluminium, the coefficient of volume expansion is approximately [tex]23.1 \times 10^{-6}[/tex] per degree Celsius. This means that for every degree Celsius increase in temperature, the volume of aluminium will increase by approximately 23.1 parts per million (ppm).
This coefficient of volume expansion is an important property of aluminium, as it affects its behaviour in a variety of applications. For example, in the aerospace industry, aluminium is used extensively in the construction of aircraft because of its low weight and high strength-to-weight ratio. However, as the temperature of the aircraft changes during flight, the volume of the aluminium components will also change, potentially affecting the structural integrity of the aircraft.
Understanding the coefficient of volume expansion is therefore essential for engineers and designers working with aluminium in a variety of fields, from aerospace to construction to electronics.
To learn more about volume expansion
https://brainly.com/question/31456049
#SPJ4
A gasoline engine takes in 1. 61 10 J of heat and delivers 3700 J of work per cycle. The heat is obtained by burning gasoline with a heat of combustion of 4. 60 10 J/g. (a) What is the thermal efficiency? (b) How much heat is discarded in each cycle? (c) What mass of fuel is burned in each cycle? (d) If the engine goes through 60. 0 cycles per second, what is its power output in kilowatts? In horsepower?
(a). The thermal efficiency is approximately 22.9%.
(b). The heat discarded in each cycle is approximately 1.6063 × [tex]10^6[/tex] J.
(c). The mass of fuel burned in each cycle is approximately 0.035 kg.
(d). The engine's power output is approximately 222 kW or 297.6 hp.
To solve this problem, let's use the following formulas and conversions:
Thermal efficiency (η) = (Useful work output / Heat input) * 100%Heat input = Heat of combustion * Mass of fuel burnedPower output (P) = Work done per cycle * Number of cycles per second1 kilowatt (kW) = 1000 watts (W)1 horsepower (hp) = 745.7 watts (W)Given:
Heat input (Qin) = 1.61 × [tex]10^6[/tex]J
Work done per cycle (W) = 3700 J
Heat of combustion of gasoline (H) = 4.60 × [tex]10^7[/tex] J/kg
Cycles per second (f) = 60.0 cycles/s
(a) To calculate the thermal efficiency:
Thermal efficiency (η) = (Useful work output / Heat input) * 100%
η = (W / Qin) * 100%
η = (3700 J / 1.61 × 10^6 J) * 100%
η ≈ 0.229 * 100%
η ≈ 22.9%
(b) To calculate the heat discarded in each cycle:
Heat discarded = Heat input - Useful work output
Heat discarded = Qin - W
Heat discarded = 1.61 × [tex]10^6[/tex] J - 3700 J
Heat discarded ≈ 1.6063 × [tex]10^6[/tex] J
(c) To calculate the mass of fuel burned in each cycle:
Heat input = Heat of combustion * Mass of fuel burned
Mass of fuel burned = Heat input / Heat of combustion
Mass of fuel burned = 1.61 × [tex]10^6[/tex] J / 4.60 × [tex]10^7[/tex] J/kg
Mass of fuel burned ≈ 0.035 kg
(d) To calculate the power output in kilowatts and horsepower:
Power output (P) = Work done per cycle * Number of cycles per second
P = W * f
P = 3700 J * 60.0 cycles/s
P = 2.22 × [tex]10^5[/tex] J/s
Power output in kilowatts:
P(kW) = P / 1000
P(kW) ≈ 2.22 × [tex]10^5[/tex] J/s / 1000
P(kW) ≈ 222 kW
Power output in horsepower:
P(hp) = P / 745.7
P(hp) ≈ 2.22 × [tex]10^5[/tex] J/s / 745.7
P(hp) ≈ 297.6 hp
To know more about thermal efficiency refer here
https://brainly.com/question/13039990#
#SPJ11
You add 50 mL of water at 20°C to 200 mL of water at 70°C. What is the most
likely final temperature of the mixture?
OA. 60°C
о B. 45°C
C. 30°C
о D. 50°C
Answer:
Option (a)
Explanation:
Let c be the specific heat of water.
According to the principle of caloriemetry.
Heat lost by hot water = heat gained by cold water
200 x c x (70 - T) = 50 x c x (T - 20)
280 - 4T = T - 20
300 = 5T
T = 60 C
Explanation:
In a case whereby You add 50 mL of water at 20°C to 200 mL of water at 70°C the most likely final temperature of the mixture is A. 60°C.
How can this be calculated?Specific heat is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius (or one Kelvin). Different substances have different specific heats, which means that they require different amounts of heat energy to achieve the same temperature change.
The specific heat of water can be represented as c, following the principle of caloriemetry. (Heat lost by hot water) =( heat gained by cold water), thjen we can substitute the values as ;
[200 x c x (70 - T)] = [50 x c x (T - 20)]
[280 - 4T] = [T - 20]
[300 = 5T]
T = 60 C
Learn more about temperature at:
https://brainly.com/question/25677592
#SPJ1
What are the effects of elastic limit on a structure built on a fault line?
The elastic limit is the maximum stress that a material can withstand without undergoing permanent deformation.
When a structure is built on a fault line, the elastic limit plays a crucial role in determining its ability to withstand seismic forces.
If the stress caused by an earthquake exceeds the elastic limit of the structure's materials, the structure may experience permanent deformation, which can lead to compromised structural integrity and potential failure.
In contrast, if the stress remains within the elastic limit, the structure can return to its original shape once the stress is removed, maintaining its structural integrity.
In conclusion, the elastic limit affects a structure built on a fault line by determining its resilience to seismic forces.
Ensuring that the stress remains within the elastic limit can help maintain the structure's integrity and minimize damage during earthquakes.
To learn more about elastic, refer below:
https://brainly.com/question/13479805
#SPJ11
In which spectral class does a white dwarf with a temperature of 10,000 K belong?
Answer: A white dwarf with a temperature of 10,000 K belongs to the spectral class DA.
White dwarfs are classified based on their atmospheric composition and temperature. The DA spectral class refers to white dwarfs that have a hydrogen-dominated atmosphere. Their spectra exhibit strong hydrogen absorption lines.
The temperature of a white dwarf is a measure of its surface temperature and is related to its age and mass. A white dwarf with a temperature of 10,000 K is relatively hot, indicating that it is likely a young and massive white dwarf.
Explanation:
A car starting from rest accelerates in a straight line path at a constant rate of 2.5m/s².how far will it travel in 12 seconds
The car will travel a distance of 180 meters in 12 seconds.
To determine the distance traveled by the car, we can use the equation of motion:
Distance (d) = Initial velocity (v₀) × time (t) + 0.5 × acceleration (a) × time squared (t²)
Given:
Initial velocity (v₀) = 0 m/s (starting from rest)
Acceleration (a) = 2.5 m/s²
Time (t) = 12 seconds
Plugging in the values into the equation:
Distance (d) = 0 × 12 + 0.5 × 2.5 × 12²
Distance (d) = 0 + 0.5 × 2.5 × 144
Distance (d) = 0 + 0.5 × 2.5 × 144
Distance (d) = 180 meters
To know more about equation of motion refer here
https://brainly.com/question/14355103#
#SPJ11
Consider example 20. 15, what angle of deflection would you get if the electron gun distance as well as electron defelctor distance were to both double, with the electric fields staying as in the example?.
If the electron gun distance and electron deflection distance both double, while the electric fields stay the same, then the angle of deflection would also double.
This is because the electric field strength is directly proportional to the angle of deflection, and since the electric field strength is staying the same, the angle of deflection increases proportionally with the increase in distance.
The equation to determine the angle of deflection is as follows: θ = Vd/E, where θ is the angle of deflection, V is the velocity of the electron, d is the distance between the electron gun and deflection plate, and E is the strength of the electric field.
When the distance between the two plates doubles, the angle of deflection will also double. Therefore, if the electron gun and electron deflection plate are both doubled in distance, the angle of deflection would be double the original angle.
Know more about electric field here
https://brainly.com/question/15800304#
#SPJ11
Can someone help me with questions 2 and 4 please ?
2. The angle of refraction of the material is 16.0°.
4. Index of refraction of the prism is n = 1.45.
How to determine angle and index of refraction?2. Using Snell's law:
n₁sinθ₁ = n₂sinθ₂
where n₁ = index of refraction of the first material (a), θ₁ = angle of incidence (13°), n₂ = index of refraction of the second material (1.60), and θ₂ = angle of refraction (unknown).
Plugging in the given values:
2.04sin13° = 1.60sinθ₂
θ₂ = sin⁻¹(2.04sin13°/1.60) = 16.0°
Therefore, the angle of refraction is θ = 16.0°.
4. Again, using Snell's law:
n₁sinθ₁ = n₂sinθ₂
where n₁ = index of refraction of water (1.33), θ₁ = angle of incidence (45°), n₂ = index of refraction of the prism (unknown), and θ₂ = angle of refraction (42°).
Plugging in the given values:
1.33sin45° = n₂sin42°
n₂ = sin45°/sin42° × 1.33 ≈ 1.45
Therefore, the index of refraction of the prism is n = 1.45.
Find out more on refractive angle and index here: https://brainly.com/question/14760207
#SPJ1
A horizontal, uniform board of weight 125 n and length 4 m is supported by vertical chains at each ends. a person weighing 500 n is sitting on the board. the tension in the right chain is 125 n.what is the tension in the left chain
The tension in the left chain is 500 N, which is equal to the weight of the person on the board. Since the board is in equilibrium, the net force and net torque acting on the board must be zero.
Let's consider the forces acting on the board: the weight of the board (125 N) acts downward, the weight of the person (500 N) acts downward at the center of the board, and the tension in each chain acts upward.
Since the tension in the right chain is given to be 125 N, the total upward force acting on the board is 125 N + T (where T is the tension in the left chain).
Therefore, the net force on the board is 125 N + T - 625 N = 0 (where 625 N is the combined weight of the board and person).
Solving for T, we get T = 500 N, which is the tension in the left chain. So the tension in the left chain is 500 N, which is equal to the weight of the person on the board.
To know more about torque, refer here:
https://brainly.com/question/29024338#
#SPJ11
A drug tagged with 9943Tc (half-life = 6. 05 h) is prepared for a patient. If the original activity of the sample was 1. 0 ✕ 104 Bq, what is its activity (R) after it has been on the shelf for 1. 8 h?
After 1.8 hours on the shelf, the activity of the drug tagged with 99m43Tc is approximately 8147 Bq.
Step 1: Calculate the number of half-lives that have passed.
To do this, divide the elapsed time (1.8 h) by the half-life of the isotope (6.05 h).
Number of half-lives = 1.8 h / 6.05 h = 0.2975 half-lives
Step 2: Use the decay formula to calculate the remaining activity.
The decay formula is R = R₀ * (1/2)^(t/T), where R is the remaining activity, R₀ is the initial activity, t is the elapsed time, and T is the half-life.
Step 3: Plug in the values and solve for R.
R = (1.0 x 10^4 Bq) * (1/2)^(0.2975)
R ≈ 1.0 x 10^4 Bq * 0.8147
R ≈ 8147 Bq
So, after 1.8 hours on the shelf, the activity of the drug tagged with 99m43Tc is approximately 8147 Bq.
To know more about activity, refer here:
https://brainly.com/question/31293301#
#SPJ11
A man pushes a 10 kg block on a straight horizontal road by applying
a force of 5 N. As a result, he moves the block a distance of 10 meters
with an acceleration of 0. 2 m/s2. Calculate the work done by the
man on the block during motion.
The man does 50 J of work on the block during the motion.
To calculate the work done by the man on the block, we can use the formula:
Work = Force x Distance x Cos(theta)
where theta is the angle between the force and the displacement vectors. In this case, the force and displacement are in the same direction, so theta is 0.
Given that the force applied by the man is 5 N and the distance moved by the block is 10 meters, the work done by the man can be calculated as:
Work = 5 N x 10 m x Cos(0) = 50 J
Therefore, the man does 50 J of work on the block during the motion.
To know more about force, refer here:
https://brainly.com/question/13191643#
#SPJ11
Activity 3:
Direction: Read the sample weather bulletin.
Weather Bulletin: Tropical Cyclone Typhoon Rolly (GONI)
Sunday, 1 November, 2020 at 4:00 PM (DOST PAG-ASA 2020)
Location of Center
50 km South Southwest of Tayabas, Quezon
Coordinates
13. 6°N, 121. 40 E
Strength of the Winds
Maximum sustained winds of 165 km/h near
the center and gustiness of up to 230 km/h.
Movernent
Moving westward at 25 km/h
Forecast positions
(24 hours) Afternoon of November 2: 300 km
West of Iba, Zambales
15. 1° N, 117. 20 E
(48 hours) Afternoon of November 3: 665 km
West of Iba, Zambales
Outside PAR (15° N, 113. 8°E)
(72 hours) Afternoon of November 4: 935 km
West of Central Luzon
Outside PAR (14. 79 N, 111. 6° E)
Questions:
3.
What is the speed of the typhoon winds?
What is the velocity of the typhoon?
How does speed differ from velocity?
How important is knowing the velocity in determining the weather
forecast for the next hours?
4
Let Us Reflect
Based on the weather bulletin provided for Typhoon Rolly (GONI), the speed of the typhoon winds is 165 km/h with gustiness up to 230 km/h.
The velocity of the typhoon, which takes into account both the speed and direction, is moving westward at 25 km/h.
The main difference between speed and velocity is that speed only considers the magnitude of motion, while velocity includes both the magnitude and direction of motion.
Knowing the velocity of the typhoon is important in determining the weather forecast for the next hours, as it helps predict the movement and potential impact of the typhoon on specific areas.
This information can help authorities and individuals prepare and respond accordingly to ensure safety and minimize damages.
To learn more about forecast, refer below:
https://brainly.com/question/30167588
#SPJ11
In a vacuum, electromagnetic radiation of short wavelengths.
In a vacuum, electromagnetic radiation of short wavelengths refers to high-energy radiation. According to the electromagnetic spectrum, shorter wavelengths correspond to higher frequencies and higher energies.
At the short wavelength end of the spectrum, you have gamma rays, which have the shortest wavelengths and highest energy among all forms of electromagnetic radiation. Gamma rays have wavelengths less than 10 picometers (pm) or frequencies greater than 10 exahertz (EHz).
Gamma rays are highly energetic and can penetrate matter deeply. They are often produced in nuclear reactions, radioactive decay, and high-energy particle interactions.
It's important to note that in a vacuum, all forms of electromagnetic radiation, including gamma rays, travel at the speed of light. The properties of electromagnetic radiation, such as wavelength and frequency, are intrinsic characteristics that remain constant regardless of the medium through which they propagate.
To know more about electromagnetic refer here
https://brainly.com/question/5015556#
#SPJ11
in which of the following situations does the car have a nonzero acceleration?multiple select question.the car is on cruise control traveling around a curve.the car starts from rest and speeds up to the speed limit moving in a straight line.the car is on cruise control traveling in a straight line.the car is parked.the car is traveling at the speed limit and then comes to a complete stop while traveling around a curve.the car is traveling at the speed limit, and then it comes to a complete stop in a straight line.
The car has a nonzero acceleration in the following situations:
The car starts from rest and speeds up to the speed limit moving in a straight line.The car is traveling at the speed limit and then comes to a complete stop while traveling around a curve.The car is traveling at the speed limit, and then it comes to a complete stop in a straight line. Options 1, 2, and 3 are correct.Acceleration is defined as the rate of change of velocity with respect to time. Therefore, any change in the velocity of the car, whether it is an increase, decrease, or change in direction, results in a nonzero acceleration. When the car starts from rest and speeds up or comes to a stop, its velocity changes, resulting in a nonzero acceleration.
Similarly, when the car comes to a complete stop while traveling around a curve or in a straight line, its velocity changes direction, resulting in a nonzero acceleration. However, when the car is on cruise control and traveling at a constant speed in a straight line, its velocity is not changing, and therefore, its acceleration is zero. Options 1, 2, and 3 are correct.
To know more about the Cruise control, here
https://brainly.com/question/13607082
#SPJ4
If your core temperature becomes colder, it is more difficult for oxygen to dissociate from hemoglobin at any po2.
When the core temperature of the body decreases, the metabolic rate also decreases, leading to less production of carbon dioxide.
This results in a decrease in the partial pressure of CO2 in the blood, which leads to an increase in blood pH.
A higher pH means that the blood becomes more alkaline, which makes it more difficult for oxygen to dissociate from hemoglobin.
The reason for this is that oxygen binds to hemoglobin more tightly at a higher pH, which is known as the Bohr effect.
Thus, as the core temperature becomes colder, the oxygen-hemoglobin dissociation curve shifts to the left, making it more difficult for oxygen to be released from hemoglobin and making it less available to the tissues that require it.
To know more about Bohr effect, refer here:
https://brainly.com/question/15970643#
#SPJ11
Bart has rubbed a balloon with wool to give it a charge of -1.0 x 10-6 c. he then acquires a plastic golf tube with a charge of +4.0 x 10-6 c localized at a given position. determine the distance between the golf tube and the balloon if the electrical force between the two is -1.0 x 10-5 n.
The distance between the golf tube and the balloon is approximately 53.9 millimeters.
To solve this problem, we can use Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is proportional to the product of their charges divided by the square of the distance (r) between them:
F = k * (q1 * q2) / r²
where k is Coulomb's constant, approximately 8.99 x 10^9 Nm²/C².
In this case, the electrical force (F) is -1.0 x 10^-5 N, the charge of the balloon (q1) is -1.0 x 10^-6 C, and the charge of the plastic golf tube (q2) is +4.0 x 10^-6 C. We want to find the distance (r) between them.
First, let's rearrange the formula to solve for r:
r = √(k * (q1 * q2) / F)
Now, substitute the given values into the equation:
r = √((8.99 x 10^9 Nm²/C²) * (-1.0 x 10^-6 C) * (4.0 x 10^-6 C) / (-1.0 x 10^-5 N))
Solve for r:
r ≈ 0.0539 meters or 53.9 millimeters
So, the distance between the golf tube and the balloon is approximately 53.9 millimeters.
To learn more about force, refer below:
https://brainly.com/question/13191643
#SPJ11
Two uniform solid spheres have the same mass, 1.75 kg, but one has a radius of 0.206 m while the other has a radius of 0.834 m. for each of the spheres, find the torque required to bring the sphere from rest to an angular velocity of 327 rad/s in 15.5 s. each sphere rotates about an axis through its center. torque on sphere with the smaller radius.
The torque required for the sphere with the smaller radius is approximately 0.622 N*m.
To find the torque required for each sphere, we need to first calculate the moment of inertia (I) for each sphere, and then use the formula for torque (τ) which is τ = I * α, where α is the angular acceleration.
The moment of inertia for a solid sphere is given by I = (2/5) * M * R^2, where M is the mass and R is the radius.
For the smaller sphere (radius = 0.206 m):
I₁ = (2/5) * 1.75 kg * (0.206 m)^2 ≈ 0.0295 kg*m^2
For the larger sphere (radius = 0.834 m):
I₂ = (2/5) * 1.75 kg * (0.834 m)^2 ≈ 0.5093 kg*m^2
Next, we need to find the angular acceleration (α) using the formula α = Δω/Δt, where Δω is the change in angular velocity and Δt is the time interval.
Δω = 327 rad/s (final angular velocity) - 0 rad/s (initial angular velocity) = 327 rad/s
Δt = 15.5 s
α = 327 rad/s / 15.5 s ≈ 21.1 rad/s^2
Now, we can find the torque (τ) for each sphere using τ = I * α.
Torque for smaller sphere:
τ₁ = 0.0295 kg*m^2 * 21.1 rad/s^2 ≈ 0.622 N*m
Torque for larger sphere:
τ₂ = 0.5093 kg*m^2 * 21.1 rad/s^2 ≈ 10.76 N*m
So, the torque required for the sphere with the smaller radius is approximately 0.622 N*m.
To learn more about acceleration, refer below:
https://brainly.com/question/12550364
#SPJ11
The figure shows a 25-cm-long metal rod pulled along two frictionless, conducting rails at a constant speed of 3. 5 m/s. The rails have negligible resistance, but the rod has a resistance of 0. 65 Ω
The magnitude of the force required to keep the rod moving at a constant speed is 0.9065 N.
First, let's find the induced electromotive force (EMF) using Faraday's law of electromagnetic induction: EMF = B * L * v, where L is the length of the rod, and v is its velocity. Converting the length to meters: L = 0.25 m.
EMF = 1.4 T * 0.25 m * 3.7 m/s = 1.295 V
Next, let's find the induced current using Ohm's law: I = EMF / R, where R is the resistance of the rod.
I = 1.295 V / 0.50 Ω = 2.59 A
The current induced in the rod is 2.59 A.
Now, let's calculate the magnitude of the force required to keep the rod moving at a constant speed. The force needed to maintain constant speed is equal to the magnetic force acting on the rod, which is given by F = I * L * B.
F = 2.59 A * 0.25 m * 1.4 T = 0.9065 N
The magnitude of the force required to keep the rod moving at a constant speed is 0.9065 N.
To know more about force, refer here:
https://brainly.com/question/12457580#
#SPJ11
Complete question:
The figure shows a 25 cm -long metal rod pulled along two frictionless, conducting rails at a constant speed of 3.7 m/s . The rails have negligible resistance, but the rod has a resistance of 0.50 Ω .
B=1.4T
What is the current induced in the rod?
What is the magnitude of the force is required to keep the rod moving at a constant speed?
Which statement best describes what would happen if the current in the coil of an electromagnet were increased?
A. The electromagnet would stop working until the current became steady
B. The magnetic field would not change
C. The magnetic field would decrease
D. The magnetic field would increase
Answer:D. The magnetic field would increase.
Explanation:
A sound wave has a wavelength of 0. 96 m. How many times does this wave cause your eardrum to oscillate back and forth in 1 s?
A sound wave has a wavelength of 0. 96 m and this sound wave causes your eardrum to oscillate back and forth 357 times per second or 357 Hz.
The number of times a sound wave causes your eardrum to oscillate back and forth in one second is known as its frequency. We can calculate the frequency of a sound wave by dividing the speed of sound by its wavelength.
The speed of sound in air at room temperature is about 343 m/s.To calculate the frequency of a sound wave with a wavelength of 0.96 m, we can use the formula:
frequency = speed of sound/wavelength
frequency = 343 m/s / 0.96 m
frequency = 357 Hz
Therefore, this sound wave causes your eardrum to oscillate back and forth 357 times per second, or 357 Hz.
In summary, the frequency of a sound wave is the number of times it causes your eardrum to oscillate back and forth in one second. We can calculate the frequency of a sound wave by dividing the speed of sound by its wavelength. A sound wave with a wavelength of 0.96 m has a frequency of 357 Hz.
To know more about wavelength refer here:
https://brainly.com/question/10600766#
#SPJ11
. a tire 0.500 m in radius rotates at a constant rate of 200 revolutions per minute. find the speed and acceleration of a small stone lodged in the tread of the tire
The speed of the small stone lodged in the tire's tread is approximately 10.47 m/s, and its acceleration is approximately 219.35 m/s².
We need to find the speed and acceleration of a small stone lodged in the tread of a tire with a 0.500 m radius, rotating at 200 revolutions per minute.
First, let's convert the revolutions per minute (rpm) to radians per second (rad/s):
200 rpm * (2π radians/1 revolution) * (1 minute/60 seconds) ≈ 20.94 rad/s
Now, we can find the linear speed (v) of the stone using the formula:
v = rω, where r is the radius, and ω is the angular velocity in rad/s.
v = 0.500 m * 20.94 rad/s ≈ 10.47 m/s
Next, we'll find the centripetal acceleration (a_c) of the stone using the formula:
a_c = rω²
a_c = 0.500 m * (20.94 rad/s)² ≈ 219.35 m/s²
For more about speed:
https://brainly.com/question/7359669
#SPJ11
Technician a says that there is often more than one circuit being protected by each fuse. Technician b says that more than one circuit often shares a single ground connector. Which technician is correct?
a. Technician a.
b. Technician b.
c. Both technician a and b.
d. Neither technician a and b
The correct answer is c. Both Technician A and B are correct.
Technician A is correct because there is often more than one circuit being protected by each fuse. Fuses are used to protect electrical circuits from excessive current, which can cause damage or fire. It is common for multiple circuits to be connected to a single fuse, as it simplifies the electrical system and reduces the number of fuses needed.
Technician B is also correct because more than one circuit often shares a single ground connector. A ground connector provides a path for excess electrical energy to flow safely to the ground, preventing damage to components and electrical shock. By sharing a ground connector, multiple circuits can utilize a common grounding point, further simplifying the electrical system and reducing the need for additional connectors.
Overall Both technicians are correct, as multiple circuits can be protected by a single fuse, and multiple circuits can share a single ground connector.
To Know more about fuse in electrical circuits click here:
https://brainly.com/question/31229645
#SPJ11
Identify the level of ecological organization referenced in this statement: The herd of elephants moved quickly. Question 9 options:
The level of ecological organization referenced in the statement "The herd of elephants moved quickly" is the population level.
This is because a population consists of individuals of the same species, in this case, elephants, living in the same area and interacting with one another.
In this particular statement, the focus is on a group of elephants, referred to as a herd. A herd is a group of individuals of the same species, in this case, elephants, that live and interact together. The movement of the herd as a collective entity implies the behavior and characteristics of the population as a whole.
At the population level of ecological organization, the emphasis is on understanding the dynamics, behaviors, and interactions of a group of individuals belonging to the same species in a particular area.
The population level provides insights into factors such as population size, population density, population growth, social dynamics, and reproductive patterns.
In the given statement, the mention of the herd of elephants moving quickly suggests a collective behavior and movement pattern observed in a population of elephants.
This observation would be relevant to understanding the ecological dynamics and behavioral characteristics specific to elephant populations, such as their migratory patterns, foraging strategies, or response to environmental changes.
To learn more about behavior, refer below:
https://brainly.com/question/29751317
#SPJ11
The rear defroster of your car operates on a current of 6. 00 A. If the voltage drop across it is 5. 00 V, how much electric power is it consuming as it melts the frost
The rear defroster is consuming 30.00 watts of electric power as it melts the frost. Electric power is the rate at which electrical energy is consumed or produced.
It is calculated by multiplying the voltage (V) across a device or component by the current (I) flowing through it.
To calculate the electric power consumed by the rear defroster, you can use the formula:
Power (P) = Voltage (V) × Current (I)
Given:
Current (I) = 6.00 A
Voltage (V) = 5.00 V
Substituting the values into the formula:
P = 5.00 V × 6.00 A
P = 30.00 W
Therefore, the rear defroster is consuming 30.00 watts of electric power as it melts the frost. The power indicates how quickly the defroster can generate heat and melt the frost on the rear window of the car.
To know more about refer electric power here
brainly.com/question/27442707#
#SPJ11