2. A student in the group next to you is not following the safety rules. He manages to spill a large amount of solution on his clothes and THEN he catches himself on fire! His burning clothes give off a beautiful bright red color. What chemical compound did he spill on himself? How do you know?​

The pH of a solution with [H+] = 4.71x[tex]10^-^1^0[/tex] is approximately 9.327, as pH is a measure of the acidity or basicity of a solution as it is defined as the negative logarithm of the concentration of hydrogen ions in moles per liter (pH = -log[H+]).

The lower the pH, the more acidic the solution, while a higher pH indicates a more basic solution. In the given problem, the concentration of hydrogen ions ([H+]) is 4.71x [tex]10^-^1^0[/tex]

To calculate the pH,

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in moles per liter.

Substituting [H+] = 4.71x[tex]10^-^1^0[/tex] into the formula,

pH = -log(4.71x[tex]10^-^1^0[/tex]) = -(-9.327) = 9.327

Therefore, the pH of a solution with [H+] = 4.71x[tex]10^-^1^0[/tex] is approximately 9.327.

Learn more about the pH here.

https://brainly.com/question/491373

#SPJ1

The wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is 1.44 m.

Wavelength is a concept used in physics to describe the distance between two points of a wave. It is usually measured in meters or nanometers and is expressed as the inverse of the frequency of the wave. Wavelength is an important concept in fields such as electromagnetism, optics, and acoustics. It is used to describe the size of a wave, the frequency of a wave, and the speed at which a wave travels.

Wavelength (λ) is the distance between two successive crests of a wave. For a person running at a constant speed, the wavelength is determined by the speed of the person and the frequency of the wave.
Frequency (f) is the number of waves passing through a given point in a given time.
So, the wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is calculated as follows:
λ = (2.72 m/s) / (2 x 0.80 m) = 1.44 m
Therefore, the wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is 1.44 m.

To learn more about wavelength
https://brainly.com/question/29425795
#SPJ4

The only plate with all margins as convergent boundaries is the Pacific Plate. Convergent boundaries occur when two tectonic plates move toward each other and collide, resulting in the formation of various geological features such as mountains, volcanic arcs, and deep-sea trenches.

The Pacific Plate is the largest tectonic plate on Earth, covering an area of around 103 million square kilometers. It is surrounded by convergent boundaries along its entire perimeter. To the west, it converges with the Eurasian,

Philippine Sea, and Australian Plates, forming the Japan, Kuril-Kamchatka, and Izu-Bonin-Mariana Trenches, as well as the Indonesia and Philippine Trenches. To the east, it converges with the North American and Cocos Plates, resulting in the deep-sea trenches along the western coast of North and Central America, and the formation of the Andes mountain range in South America.

To the south, the Pacific Plate converges with the Antarctic Plate, forming the Pacific-Antarctic Ridge. To the north, it converges with the North American Plate, resulting in the formation of the Aleutian Trench and volcanic arc.

The continuous movement of the Pacific Plate and its surrounding convergent boundaries are responsible for much of the seismic and volcanic activity in the Pacific Ring of Fire, which is home to about 75% of the world's active and dormant volcanoes.

To know more about tectonic plates refer here

https://brainly.com/question/19317822#

#SPJ11

2.83 moles of [tex]Al_2(SO_4)_3[/tex]  are produced when 8.5 moles of H2SO4 are available to react.

The balanced chemical equation for the reaction between sulfuric acid (H2SO4) and the aluminum sulfate [tex]Al_2(SO_4)_3[/tex] is:

[tex]3 H_2SO_4 + Al_2(SO_4)_3[/tex]  → [tex]Al_2(SO_4)_3 + 3 H_2O[/tex]

From the equation, we can see that for every one mole of the [tex]Al_2(SO_4)_3[/tex] produced, three moles of [tex]H_2SO_4[/tex] are needed. Therefore, the number of moles of the [tex]Al_2(SO_4)_3[/tex]produced is one-third the number of moles of the [tex]H_2SO_4[/tex] available to react.

Given that 8.5 moles of [tex]H_2SO_4[/tex] are available to react, the number of moles of [tex]Al_2(SO_4)_3[/tex] produced can be calculated as:

8.5 moles [tex]H_2SO_4[/tex] × (1 mole [tex]Al_2(SO_4)_3[/tex] / 3 moles [tex]H_2SO_4[/tex]) = 2.83 moles [tex]Al_2(SO_4)_3[/tex]

To know more about balanced chemical equation, here

brainly.com/question/28294176

#SPJ1

There are 3530.88 grams of sulfuric acid (H₂SO₄) dissolved in a 2-liter solution that is 18 molar.

To calculate the grams of sulfuric acid (H₂SO₄) dissolved in a 2-liter solution that is 18 M (molar), you can follow these steps:

1. Determine the moles of H₂SO₄ in the solution:
Moles of H₂SO₄ = Molarity × Volume of solution
Moles of H₂SO₄ = 18 M × 2 L = 36 moles

2. Calculate the grams of H₂SO₄ using the molar mass:
Grams of H₂SO₄ = Moles × Molar mass of H₂SO₄
The molar mass of H₂SO₄ = (2 × H) + (1 × S) + (4 × O) = (2 × 1.01) + (32.07) + (4 × 16.00) = 98.08 g/mol

3. Multiply the moles of H₂SO₄ by its molar mass:
Grams of H₂SO₄ = 36 moles × 98.08 g/mol = 3530.88 grams

So, 3530.88 grams of sulfuric acid (H₂SO₄) are dissolved in a 2-liter solution that is 18 molar.

Learn more about sulfuric acid at https://brainly.com/question/10220770

#SPJ11

The final pressure of the gas is 1,430 mmHg.

Using the combined gas law, we can relate the initial pressure, volume, and temperature to the final pressure and volume:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature, and P₂ and V₂ are the final pressure and volume.

Plugging in the given values, we get:

(850 mmHg x 1.5 L)/288 K = (P₂ x 2.5 L)/308 K

Solving for P₂, we get:

P₂ = (850 mmHg x 1.5 L x 308 K)/(2.5 L x 288 K) = 1430 mmHg

Therefore, 1,430 mmHg is the final pressure of the gas.

To know more about pressure, refer here:

https://brainly.com/question/1890275#

#SPJ11

Unbalanced forces acting on a Nebula result in a change in its motion.(C)

When unbalanced forces act on a nebula, they disrupt its equilibrium and cause a change in its motion. This is due to Newton's First Law of Motion, which states that an object at rest or in constant linear motion will continue in that state unless acted upon by an unbalanced force.

In the case of a nebula, the unbalanced forces may come from nearby stellar explosions, passing stars, or gravitational interactions.

These forces can cause parts of the nebula to compress and collapse, initiating the formation of new stars and planetary systems. As a result, the motion of the nebula changes over time as it evolves and develops under the influence of these forces.(C)

To know more about Newton's First Law of Motion click on below link:

https://brainly.com/question/29775827#

#SPJ11

The mass of copper in the penny is 15.84 grams.

The mass of copper in a penny can be calculated by multiplying the number of copper atoms present in the penny with the molar mass of copper.

Given that the penny contains 1.5 x 10²³ atoms of copper, we can use the Avogadro's constant to convert the number of atoms to moles.

1 mole of any substance contains 6.022 x 10²³ particles, which is the Avogadro's constant.

Number of moles of copper in the penny = 1.5 x 10²³ / 6.022 x 10²³ = 0.249 mol

The mass of copper in the penny can then be calculated using the molar mass of copper, which is 63.55 g/mol.

Mass of copper in penny = Number of moles x Molar mass

Mass of copper in penny = 0.249 mol x 63.55 g/mol

Mass of copper in penny = 15.84 g

To know more about molar mass , refer here:

https://brainly.com/question/22997914#

#SPJ11

The concentration of the potassium hydroxide solution is 1.4 mol/dm³.

To calculate the concentration of the potassium hydroxide (KOH) solution, we can use the formula:

moles of acid = moles of base

For a titration involving hydrochloric acid (HCl) and potassium hydroxide (KOH), the balanced chemical equation is:

HCl + KOH → KCl + H2O

From the balanced equation, we can see that 1 mole of HCl reacts with 1 mole of KOH. Given the volume and concentration of the acid, we can first find the moles of HCl:

moles of HCl = volume (dm³) × concentration (mol/dm³)
moles of HCl = 0.035 dm³ × 2 mol/dm³
moles of HCl = 0.07 moles

Since moles of acid = moles of base, we have:

moles of KOH = 0.07 moles

Now, we can find the concentration of KOH:

concentration of KOH (mol/dm³) = moles of KOH / volume of KOH (dm³)
concentration of KOH = 0.07 moles / 0.050 dm³
concentration of KOH = 1.4 mol/dm³ (rounded to 1 decimal place)

Thus, the concentration of the potassium hydroxide solution is 1.4 mol/c.

Know more about Titration here:

https://brainly.com/question/30616813

#SPJ11

The discrepancy gap between customer expectations and perceptions towards service quality of front office staff/night auditor is commonly referred to as the "service gap."

This gap arises when customers have certain expectations regarding the level of service they will receive, but their actual perceptions of the service fall short of those expectations.

The service gap can be caused by a variety of factors, including inadequate training of front office staff, poor communication between staff and customers, inconsistencies in service delivery, and failure to meet customer needs and preferences.

To reduce the service gap, it is important for organizations to have a clear understanding of customer expectations and to ensure that their service delivery meets or exceeds those expectations.

This may involve implementing better training programs for front office staff, improving communication with customers, and implementing systems for monitoring and measuring customer satisfaction.

To know more about service gap refer to-

https://brainly.com/question/6483983

#SPJ11

Answer:

Yes, radioactive decay will change the identity of an atom.

Explanation:

This is because the radioactive decay involves the emission of particles that change the number of protons in the nucleus. The number of protons is what determines the identity of the atom.

Answer:

in most instances, the atom changes its identity to become a new element

Explanation:

The term mole concept is used here to determine the number of grams of sucrose. The mole concept is a convenient method to express the amount of the substance. The grams of sucrose is  1509.5 g.

One mole of a substance is that amount of it which contains as many particles or entities as there are atoms in exactly 12 g of carbon 12. The equation used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

1. Mass = 4.41 × 342.3 = 1509.5 g

2. Moles = 350 / 105.98 = 3.302

3. Mass = 7.38 × 36.45 = 269.001 g

To know more about mole concept, visit;

https://brainly.com/question/30307377

#SPJ1

1. 2 moles of Calcium 8016 grams = 8.01x103 grams, 2. 3 moles of Sodium 69 grams = 2.07x1023 particles, and many more given below:

Calcium is an essential mineral that is found in the human body. It is necessary for the proper functioning of many organs, including the heart and muscles. Calcium is also important for the formation and maintenance of healthy bones and teeth. It plays a role in nerve and muscle function, blood clotting, and hormone secretion. Adequate calcium intake is important for both children and adults to ensure proper growth, development, and overall health.

3. 392 grams of Technetium = 9.10x1022 particles

4. 3.01x1024 particles of Chromium = 8.41x10-2 moles

5. 5 moles of Fluorine = 25 grams

6. 24 grams of Helium = 4.67x1023 particles

7. 1.806x1024 particles of Sulfur = 4.86x10-2 moles

8. 3 moles of Platinum = 195.2 grams

9. 240 grams of Argon = 6.67x1023 particles

To learn more about Calcium
https://brainly.com/question/30594488
#SPJ1

Ans 1  = 2 fe +3 cl2 = 2 fecl3

blank 1 = 2

blank 2 = 3

blank 3 = 2

Ans.2 = 4fe +3 o2 = 2fe2o3

blank 1 = 4

blank 2 = 3

blank 3 = 2

Ans.3 = c6h6o3 +H2o = 2c2h3

blank 1 = 1

blank 2 = 1

blank 3 = 2

The equilibrium expression for the ionization of HOI is:

Kc = [H⁺][OI⁻]/[HOI]

In this expression, [H⁺] represents the concentration of hydrogen ions, [OI⁻] represents the concentration of hypoiodite ions, and [HOI] represents the concentration of the undissociated hypohalous acid. The equilibrium constant, Kc, is a measure of the extent to which the reaction has reached equilibrium.

In the case of HOI, the equilibrium constant can be used to determine the degree of ionization of the acid in solution. If Kc is large, it indicates that the reaction favors the formation of ions and that the acid is strong. If Kc is small, it indicates that the reaction favors the formation of undissociated acid and that the acid is weak. The value of Kc can also be used to calculate the concentrations of the different species in the solution at equilibrium, given the initial concentrations and the stoichiometry of the reaction.

To learn more about equilibrium expression, here

https://brainly.com/question/27110003

#SPJ4

The complete question is:

Write the equilibrium expression for the ionization of HOI?

Here, 47.29 mg of chlorine is needed to react with 0.175g of gold.

To calculate the mass of chlorine needed to react with 0.175g of gold, we will use the equation and the relative atomic masses provided.

1. First, find the moles of gold:

Moles of gold = mass / relative atomic mass

Moles of gold = 0.175g / 197g/mol

                       = 0.0008883 mol

2. According to the balanced equation, 2 moles of gold react with 3 moles of chlorine. So, we need to find the moles of chlorine required:

Moles of chlorine = (3/2) * moles of gold

Moles of chlorine = (3/2) * 0.0008883 mol

                             = 0.001332 mol

3. Now, find the mass of chlorine needed:

Mass of chlorine = moles of chlorine * relative atomic mass

Mass of chlorine = 0.001332 mol * 35.5g/mol

                            = 0.04729g

4. Finally, convert the mass from grams to milligrams:

Mass of chlorine in mg = 0.04729g * 1000mg/g

                                      = 47.29mg

To know more about the molar concept, click below.

https://brainly.com/question/23711705

#SPJ11

The mass of the cube of titanium is 2.02 x 10^6 micrograms.

To find the mass of the cube of titanium in micrograms, we first need to find its volume:

Volume = (edge length)^3 = (3.67 x 10^4 micrometers)^3

            = 4.49 x 10^14 cubic micrometers

Next, we need to convert the density of titanium from grams per cubic centimeter to micrograms per cubic micrometer:

4.5 g/cm^3 = 4.5 x 10^9 micrograms/ (10^4 micrometers)^3

                   = 4.5 x 10^9 micrograms/ (10^12 cubic micrometers)

Now we can calculate the mass of the cube:

Mass = Volume x Density

         = 4.49 x 10^14 cubic micrometers x 4.5 x 10^9 micrograms/ (10^12 cubic micrometers)

         = 2.02 x 10^6 micrograms

Learn more about mass at https://brainly.com/question/86444

#SPJ11

One possible approach is to create a safe and controlled demonstration using common household materials, such as baking soda and vinegar. Mixing these two substances produces carbon dioxide gas, which can be collected and observed.

To perform the demonstration safely, it is important to wear appropriate personal protective equipment, such as gloves and eye protection, and to conduct the demonstration in a well-ventilated area to minimize the risk of exposure to the gas.

In addition to the practical considerations of performing a demonstration, it is also important to reflect on the significance of the demonstration and its relation to the holy week.

The demonstration can serve as a reminder of the ways in which the natural world around us can provide opportunities for learning and understanding, and can also be seen as a symbol of renewal and transformation, which are central themes of the holy week.

Finally, it is important to reflect on the current pandemic situation and the need to prioritize safety and responsible behavior.

Demonstrations should be performed in a way that minimizes the risk of transmission of the virus, and individuals should follow guidelines and protocols established by health authorities and local governments.

Overall, exhibiting a gas during the holy week can be a meaningful and educational experience, but it is important to approach the demonstration with caution and responsibility, both in terms of personal safety and the current pandemic situation.

To know more about approach refer here

https://brainly.com/question/18721465#

#SPJ11

To solve this problem, we need to use the balanced chemical equation for the reaction of Potassium and water:

2K + 2H2O → 2KOH + H2

This equation tells us that for every 2 moles of Potassium that react with water, we get 1 mole of hydrogen gas.

So, if we have 20.0 g of Potassium, we need to first convert this to moles using the molar mass of Potassium:

20.0 g K x (1 mol K / 39.10 g K) = 0.511 mol K

Now we can use the stoichiometry of the balanced equation to find the moles of hydrogen produced:

0.511 mol K x (1 mol H2 / 2 mol K) = 0.255 mol H2

Therefore, there are 0.255 moles of hydrogen produced in the reaction.:

2K + 2H2O → 2KOH + H2

This equation tells us that for every 2 moles of Potassium that react with water, we get 1 mole of hydrogen gas.

So, if we have 20.0 g of Potassium, we need to first To solve this problem, we need to use the balanced chemical equation for the reaction of Potassium and water:

2K + 2H2O → 2KOH + H2

This equation tells us that for every 2 moles of Potassium that react with water, we get 1 mole of hydrogen gas.

So, if we have 20.0 g of Potassium, we need to first convert this to moles using the molar mass of Potassium:

20.0 g K x (1 mol K / 39.10 g K) = 0.511 mol K

Now we can use the stoichiometry of the balanced equation to find the moles of hydrogen produced:

0.511 mol K x (1 mol H2 / 2 mol K) = 0.255 mol H2

Now we can use the stoichiometry of the balanced equation to find the moles of hydrogen produced:

0.511 mol K x (1 mol H2 / 2 mol K) = 0.255 mol H2

Therefore, there are 0.255 moles of hydrogen produced in the reaction.

To know more about stoichiometry click here:

brainly.com/question/14935523

#SPJ11

When CO₂ is heated from 15°C to 37°C, its molar internal energy changes by 2446.2 J/mol, as does its molar enthalpy.

The following equation can be used to determine how carbon dioxide (CO₂) will change in molar enthalpy and molar internal energy when heated from 15 to 37 degrees Celsius:

ΔH = ΔU + ΔnRT

ΔU = nCvΔT

where:

ΔH = change in molar enthalpy of CO₂ (in J/mol)

ΔU = change in molar internal energy of CO₂ (in J/mol)

Δn = change in moles of CO₂ (in mol)

R = universal gas constant (8.314 J/(mol·K))

T = temperature (in K)

Cv = molar heat capacity at constant volume (in J/(mol·K))

ΔT = change in temperature (in K)

First, let's calculate the change in temperature:

ΔT = T2 - T1

= (37 + 273.15) K - (15 + 273.15) K

= 22 K

Next, let's calculate the change in molar internal energy:

ΔU = nCvΔT

= 3 mol × 37.1 J/(mol·K) × 22 K

= 2446.2 J/mol

Now, let's calculate the change in molar enthalpy using the equation:

ΔH = ΔU + ΔnRT

where Δn = 0 because the number of moles of CO₂ does not change during heating. Therefore:

ΔH = ΔU + ΔnRT

= 2446.2 J/mol + 0 mol × 8.314 J/(mol·K) × (37 + 273.15) K

= 2446.2 J/mol

To know more about molar enthalpy, refer:

https://brainly.com/question/30627521

#SPJ4

The uranium rod undergoes a temperature change of 2.41°C when 3.4 kJ of heat is added to it

To work out the adjustment of temperature of the uranium pole, we can utilize the equation:

Q = m * c * ΔT

Where Q is the intensity added, m is the mass of the uranium pole, c is the particular intensity of uranium, and ΔT is the adjustment of temperature.

In the first place, we want to change over the mass of the pole from kilograms to grams:

m = 1.4 kg * 1000 g/kg = 1400 g

Then, we can rework the recipe to settle for ΔT:

ΔT = Q/(m * c)

Subbing the given qualities:

ΔT = (3.4 kJ)/(1400 g * 0.12 J/gC) = 2.41 C

This arrangement utilizes the recipe Q = m * c * ΔT to work out the adjustment of temperature of a 1.4 kg uranium pole when 3.4 kJ of intensity is added. The mass is switched over completely to grams, and the particular intensity of uranium is utilized to find ΔT, which is viewed as 2.41°C.

Hence, the uranium pole goes through a temperature change of 2.41°C when 3.4 kJ of intensity is added to it.

To learn more about temperature change, refer:

https://brainly.com/question/14283324

#SPJ1

Heat equations are mathematical equations that are used to calculate the amount of heat energy transferred between two objects. The first heat equation, q = mcꕔt, relates the amount of heat transferred (q) to the mass of the object (m), the specific heat capacity (c), and the temperature change (ꕔt).

The specific heat capacity is the amount of heat energy required to raise the temperature of one gram of a substance by one degree Celsius. The second heat equation, q = mlvapor, relates the amount of heat required to vaporize a substance (q) to the mass of the substance (m) and the latent heat of vaporization (lvapor).

The latent heat of vaporization is the amount of heat required to transform a unit mass of a substance from a liquid phase to a gaseous phase. Finally, the third heat equation, q = mlfusion, relates the amount of heat required to melt a substance (q) to the mass of the substance (m) and the latent heat of fusion (lfusion).

The latent heat of fusion is the amount of heat required to transform a unit mass of a substance from a solid phase to a liquid phase.

to know more about Heat equations refer here

https://brainly.com/question/28205183#

#SPJ11

the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.

The solubility of Ni(OH)2 depends on the pH of the solution because it can undergo acid-base reactions according to the following equilibrium:

Ni(OH)2(s) + 2 H2O(l) ⇌ Ni(OH)2(aq) + 2 OH^-(aq)

1. At pH 8.0, the solution is slightly basic, so we can assume that the hydroxide ion concentration is 10^-6 M.

The solubility product expression for Ni(OH)2 is:

Ksp = [Ni2+][OH^-]^2

Since the solution is buffered at pH 8.0, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

Therefore, [OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

2. At pH 10.3, the hydroxide ion concentration is 10^-4.7 M.

[OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The excess hydroxide ion concentration is:

[OH^-] - 10^-4.7 M = -7.6×10^-6 M

Since the excess hydroxide ion concentration is small compared to the total concentration of OH^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

3. At pH 11.9, the hydroxide ion concentration is 10^-3.1 M.

[OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The excess hydroxide ion concentration is:

[OH^-] - 10^-3.1 M = -9.9×10^-6 M

Since the excess hydroxide ion concentration is small compared to the total concentration of OH
^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

Therefore, the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.
Visit to know more about solubility:-

https://brainly.com/question/23946616

#SPJ11

To determine experimentally if a reaction is exothermic, a student should use a calorimeter. A calorimeter is a device used to measure the heat exchange during a chemical reaction, enabling the student to identify if the reaction is exothermic or endothermic. In an exothermic reaction, heat is released, causing the temperature of the surroundings to increase.

To perform the experiment, follow these steps:

1. Choose the appropriate chemical reaction to test.
2. Prepare the calorimeter by placing a known amount of water in the calorimeter's inner container.
3. Measure and record the initial temperature of the water.
4. Add the reactants (in their appropriate amounts) to the water, and quickly seal the calorimeter to minimize heat loss to the surroundings.
5. Stir the mixture gently to ensure proper mixing and heat distribution.
6. Monitor the temperature change of the water over time, recording the highest temperature reached.
7. Calculate the amount of heat released or absorbed by the reaction using the formula: q = mcΔT, where q is heat, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
8. If the heat calculated is positive and the temperature increased, the reaction is exothermic; if negative and the temperature decreased, the reaction is endothermic.

In conclusion, a student should use a calorimeter to experimentally determine if a reaction is exothermic, as it allows for the accurate measurement of heat exchange and can indicate whether heat is released or absorbed during the reaction.

To know more about exothermic refer here

https://brainly.com/question/31214950#

#SPJ11

By making a simple division of the Molar concentrations. The correct option is a.

The equilibrium constant Kc is a measure of the equilibrium between the forward and reverse reactions of a chemical reaction. It is a ratio of the concentrations of the products to the concentrations of the reactants at equilibrium.

The equilibrium constant Kc:

Kc = [products]/[reactants]

here [products] is the concentration of the products at equilibrium and [reactants] is the concentration of the reactants at equilibrium.

If the concentrations of the products and reactants are given in molar concentrations (M), we can express the equilibrium constant as a ratio of Molar concentrations using the following equation:

Kc = [products]M / [reactants]M

Therefore, to find the equilibrium constant Kc, we simply need to divide the Molar concentrations of the products and reactants by their respective coefficients.

Therefore, the correct option is a) by making a simple division of the Molar concentrations.  

Learn more about Molar concentrations Visit: brainly.com/question/26255204

#SPJ4

Correct Question:

The equilibrium constant Kc is found:

a) by making a simple division of the Molar concentrations

b) with the quotient of the speed of the products over the reactants

c) dividing the speeds of the equations that form the chemical reaction

d) with the quotient of the concentrations of the substances present in the equation​

Here, 50 mol of SO2 will be created, and 25 mol of lead will be formed from both steps of the reaction.

To determine the moles of SO2 created and moles of lead formed in both steps of the reaction, we'll first need to examine each step individually.

Step 1: PbS + O2 -> PbO + SO2
Starting with 25 mol of PbS, this reaction occurs in a 1:1 molar ratio with SO2. Thus, 25 mol of SO2 will be created in this step.

Step 2: PbO + PbS -> Pb + SO2
Since 25 mol of PbO is created in step 1, the same amount of PbS is available to react in step 2. This reaction also occurs in a 1:1 molar ratio with SO2, meaning that another 25 mol of SO2 will be created in this step.

The total amount of SO2 created in both steps is the sum of the moles produced in each step:
25 mol (from step 1) + 25 mol (from step 2) = 50 mol of SO2

Additionally, since the second step forms lead (Pb) in a 1:1 molar ratio with PbS, we will have 25 mol of lead formed.

To know more about the balancing of moles of a reaction, click below.

https://brainly.com/question/15364329

#SPJ11

To solve this problem, we need to use the combined gas law, which relates the pressure, volume, and temperature of a gas.

The combined gas law is expressed as:

(P1V1)/T1 = (P2V2)/T2

where P1 is the initial pressure, V1 is the initial volume, T1 is the initial temperature, P2 is the final pressure, V2 is the final volume, and T2 is the final temperature.

In this problem, we are given the initial volume V1 as 2.32 liters and the initial temperature T1 as 24.0°C. We need to find the final volume V2 when the temperature is raised to 48.0°C.

We can set up the equation as:

(P1V1)/T1 = (P2V2)/T2

Since the pressure remains constant, we can cancel it out:

V1/T1 = V2/T2

We can rearrange this equation to solve for V2:

V2 = (V1/T1) x T2

Substituting the given values, we get:

V2 = (2.32 L/297.15 K) x 321.15 K

V2 = 2.86 L

Therefore, the new volume of the balloon is 2.86 liters when heated to 48.0°C.

To know more about combined gas law:

https://brainly.com/question/30458409

#SPJ11

Substituted hydrocarbons are organic compounds that consist of hydrocarbons to which one or more functional groups have been substituted for one or more hydrogen atoms or carbon groups.

The functional group is a specific group of atoms that gives the molecule its characteristic properties and reactions.

Substitution is the process by which one or more hydrogen atoms or carbon groups are replaced by a functional group.

By substituting one or more hydrogen atoms or carbon groups in a hydrocarbon chain, we get a new molecule that has its own characteristic properties.

To know more about hydrocarbons visit:

https://brainly.com/question/30907363

#SPJ11

The answer is D) 15.5 grams.

To solve this problem, we need to use stoichiometry and the given balanced chemical equation. First, we need to determine the limiting reagent by calculating the number of moles of NH3 and O2:

9.75 g [tex]NH_3[/tex] x (1 mol  [tex]NH_3[/tex]/17.031 g  [tex]NH_3[/tex]) = 0.571 mol  [tex]NH_3[/tex]
Excess O2, so we do not need to calculate.

Now, we can use the mole ratio from the balanced equation to determine the moles of H2O produced:

0.571 mol  [tex]NH_3[/tex] x (6 mol H2O/4 mol  [tex]NH_3[/tex]) = 0.857 mol H2O

Finally, we can convert the moles of H2O to grams:

0.857 mol H2O x (18.015 g H2O/1 mol H2O) = 15.44 g H2O

Therefore, the answer is D) 15.5 grams.

To know more about balanced equations:

https://brainly.com/question/30485389

#SPJ11