23) The correct answer is "d) All the above."
24) The correct answer is "c) A, b, and other."
25) The correct answer is "c) A, b, and other."
26) The correct answer is "c) All of the above."
27) The correct answer is "c) A, b, and other."
28) The correct answer is "c) A, b, and other."
23: The different "lives" of construction equipment refer to various ways of looking at the lifespan and value of the equipment. The actual life of construction equipment refers to the physical lifespan of the equipment, considering factors such as wear and tear, maintenance, and repairs. The depreciable life of construction equipment is the period over which the equipment's value decreases, typically for accounting and tax purposes. The economic life of construction equipment refers to the period during which the equipment remains economically useful and cost-effective to operate. So, the correct answer is "d) All the above."
24: Decisions in various situations can be made using different factors. Tons of data can be analyzed to make informed decisions. People's input, expertise, and opinions are also valuable when making decisions. Additionally, other factors such as market trends, regulations, and financial considerations can influence decision-making. So, the correct answer is "c) A, b, and other."
25: Personal management skills are essential for effectively managing oneself and interacting with others. Communication skills are necessary for effectively expressing ideas, listening, and understanding others. Negotiation skills are important for resolving conflicts, reaching agreements, and achieving mutually beneficial outcomes. Other personal management skills may include time management, problem-solving, decision-making, and leadership skills. So, the correct answer is "c) A, b, and other."
26: Time management is crucial for managers, and they need to allocate their time effectively to various tasks and responsibilities. Family time refers to managing personal and family commitments within a manager's schedule. Boss-imposed time refers to tasks and activities assigned by the manager's superior or boss. Both family time and boss-imposed time are examples of time management considerations for managers. So, the correct answer is "c) All of the above."
27: Project managers have various functions related to managing project resources. Leading involves guiding and directing the project team towards the project's goals and objectives. Motivating involves inspiring and encouraging the project team to perform at their best. Other PM functions related to project resources may include resource allocation, training and development, performance management, and conflict resolution. So, the correct answer is "c) A, b, and other."
28: Stakeholder management is an important process in project management. Ignoring stakeholders can lead to negative consequences for the project. Communicating with stakeholders is essential for keeping them informed, addressing their concerns, and obtaining their support. Other actions in stakeholder management may include identifying stakeholders, assessing their needs and expectations, engaging them in decision-making, and managing relationships with them throughout the project. So, the correct answer is "c) A, b, and other."
To learn more about management
https://brainly.com/question/15144960
#SPJ11
For the demand function q=D(p)=600/(p+5)^2, find the following. a) The elasticity b) The elasticity at p=1, stating whether the demand is elastic, inelastic or has unit elasticity c) The value(s) of p for which total revenue is a maximum (assume that p is in dollars) a) Find the equation for elasticity. E(p)=
The equation for elasticity can be determined by differentiating the demand function with respect to price and then multiplying it by the price and dividing it by the a) quantity demanded.
b) E(p) = (p * D'(p))/D(p)
c)D'(p) represents the derivative of the demand function with respect to price.
To find D'(p), we can differentiate the demand function using the chain rule.
D'(p) = (-1200/(p+5) ^3)
Substituting this into the equation for elasticity, we get:
E(p) = (p * (-1200/(p+5)^3))/ (600/(p+5)^2)
Simplifying this expression further will give us the equation for elasticity.
E(p) = (p * D'(p))/D(p).
We know that demand is elastic when the absolute value of ε > 1, inelastic when the absolute value of ε < 1, and unitary when the absolute value of ε = 1.
For more similar questions on the equation for elasticity
brainly.com/question/31229578
#SPJ8
Find an equation of the line containing the given pair of points. (4,3) and (12,5) y= (Simplify your answer. Type your answer in slope-intercept form. Use integers or fractions for any numbers in the expression.
The equation of the line passing through the points (4,3) and (12,5) is y = (1/4)x + 2.
The equation of the line passing through the points (4,3) and (12,5) can be determined using the slope-intercept form of a linear equation, which is y = mx + b, where m represents the slope and b represents the y-intercept. To find the slope (m), we use the formula: m = (y2 - y1) / (x2 - x1). Plugging in the coordinates of the given points, we have: m = (5 - 3) / (12 - 4) = 2 / 8 = 1/4. Now that we have the slope, we can substitute it into the equation y = mx + b, along with the coordinates of one of the points to find the value of the y-intercept (b). Using the point (4,3):
3 = (1/4)(4) + b
3 = 1 + b
b = 3 - 1
b = 2
Therefore, the equation of the line passing through the points (4,3) and (12,5) is y = (1/4)x + 2. To find the equation of the line passing through two given points, we first calculate the slope using the formula (y2 - y1) / (x2 - x1), where (x1, y1) and (x2, y2) are the coordinates of the two points. Once we have the slope, we can substitute it along with the coordinates of one of the points into the slope-intercept form y = mx + b to find the y-intercept (b). By plugging in the values, simplifying, and solving for the y-intercept, we obtain the equation of the line in slope-intercept form, y = mx + b, where m is the slope and b is the y-intercept. In this case, the slope is 1/4, and using the point (4,3), we find that the y-intercept is 2. Thus, the equation of the line passing through the given points is y = (1/4)x + 2.
Learn more about Slope-Intercept Form here: https://brainly.com/question/27931574.
#SPJ11
The treatment for iron-deficiency anemia can require an adult female to take a daily supplement of ferrous gluconate, C₁2H₂FeO14, when her diet is not providing enough iron. What is the molar mass of ferrous gluconate (C₁₂H₂FeO)? molar mass of C₁2H₂2FeO₁4 = How many moles are in a supplement containing 37.0 mg C₁,H₂, FeO,? 37.0 mg C₁2H₂2FeO 14 = g/mol mol
The molar mass of ferrous gluconate (C₁₂H₂FeO) is approximately 295.91 g/mol. and there are approximately 0.000125 moles of C₁₂H₂FeO in a supplement containing 37.0 mg.
The molar mass of ferrous gluconate (C₁₂H₂FeO) can be calculated by adding up the atomic masses of each element in its chemical formula. The atomic masses of carbon (C), hydrogen (H), iron (Fe), and oxygen (O) are approximately 12.01 g/mol, 1.008 g/mol, 55.85 g/mol, and 16.00 g/mol, respectively.
To calculate the molar mass of ferrous gluconate, we multiply the number of atoms of each element in the formula by their respective atomic masses and then sum them up:
(12.01 g/mol × 12) + (1.008 g/mol × 22) + (55.85 g/mol × 1) + (16.00 g/mol × 7) = 295.91 g/mol
Therefore, the molar mass of ferrous gluconate (C₁₂H₂FeO) is approximately 295.91 g/mol.
Now, let's calculate the number of moles in a supplement containing 37.0 mg of C₁₂H₂FeO.
First, we need to convert the mass from milligrams to grams by dividing it by 1000:
37.0 mg ÷ 1000 = 0.037 g
Next, we use the molar mass of ferrous gluconate to calculate the number of moles:
0.037 g ÷ 295.91 g/mol = 0.000125 mol
Therefore, there are approximately 0.000125 moles of C₁₂H₂FeO in a supplement containing 37.0 mg.
You can learn more about molar mass at: brainly.com/question/12127540
#SPJ11
Question 20 Force of impact of jet a) Decreases with increase in diameter of the jet b) Increases with decrease in vertical distance between nozzle and target c) Decreases with increase in flow rate of jet d)Decreases with increase in velocity of impact
The statement that is true for the force of impact of jet is: d) Decreases with increase in velocity of impact.
Explanation:
The force of impact of a jet on a stationary flat plate will depend upon the density, velocity, and the area of the jet.
The magnitude of the force on the plate is found to be proportional to the mass per second, density, and the velocity head of the jet.
The force of impact of a jet decreases with the increase in velocity of impact.
Because, if the velocity of the fluid striking an object is increased, the force that results will be greater.
The force is increased because the momentum of the fluid striking the object is increased, which then increases the force on the object.
So, it is clear that the answer to the given question is option (d) Decreases with increase in velocity of impact.
To know more about force of impact visit:
https://brainly.com/question/12350159
#SPJ11
The integers 297,595 , and 2912 are pairwise relatively prime. True False
The integers 297, 595, and 2912 are NOT pairwise relatively prime. The answer is False.
Let's first define what pairwise relatively prime is. Two or more numbers are considered pairwise relatively prime if there is no common factor (other than 1) between them. For instance, 2 and 3 are pairwise relatively prime.
However, 4 and 6 are not, because they share a common factor of 2.
Thus, to determine if the integers 297, 595, and 2912 are pairwise relatively prime or not, we need to compute the greatest common divisor (GCD) for all possible pairs of numbers.
If the GCD is 1 for all pairs, then the integers are pairwise relatively prime.
So we can do it as follows:
For 297 and 595, GCD(297, 595) = 33
For 297 and 2912, GCD(297, 2912) = 33
For 595 and 2912, GCD(595, 2912) = 17
Therefore, since not all pairs have a GCD of 1, the integers 297, 595, and 2912 are NOT pairwise relatively prime.
The answer is False.
Learn more about prime
https://brainly.com/question/4184435
#SPJ11
"The integers 297,595, and 2912 are pairwise relatively prime" is false.
Two integers are considered pairwise relatively prime if their greatest common divisor (GCD) is equal to 1. In this case, we need to check the GCD between each pair of the given integers.
To find the GCD between two numbers, we can use the Euclidean algorithm.
The GCD of 297 and 595 is 1, which means they are relatively prime.
However, the GCD of 595 and 2912 is not equal to 1. By applying the Euclidean algorithm, we find that the GCD is 17. Therefore, 595 and 2912 are not relatively prime.
Since 595 and 2912 are not relatively prime, the statement is false.
Learn more about prime
https://brainly.com/question/34250415
#SPJ11
A structure has 31 ft of soil on the left side with the water table at the ground surface. On the right side there is 10 ft of water above soil. The height of the structure is the same on the left and the right. The unit weight of soils is 133 pcf. Neglecting resistance along the bottom of the structure, what is the factor of safety against sliding assuming full passive resistance? Assume that movement of the structure is from left to right. The soil friction angel is 30 degrees.
The factor of safety against sliding, assuming full passive resistance, is 2.8.
To calculate the factor of safety against sliding, we need to determine the resisting force and the driving force acting on the structure. The resisting force is provided by the passive resistance of the soil, which depends on the soil friction angle and the vertical effective stress. The driving force is given by the weight of the water and the soil on the right side of the structure.
First, let's calculate the resisting force. The vertical effective stress at the bottom of the structure on the left side is the unit weight of soil multiplied by the height of soil. Therefore, the resisting force is given by the passive resistance coefficient times the vertical effective stress times the area of the base of the structure.
On the right side, the driving force is equal to the weight of the water plus the weight of the soil above the water. The weight of the water is the unit weight of water multiplied by the height of water. The weight of the soil is the unit weight of soil multiplied by the height of soil.
Finally, the factor of safety against sliding is calculated by dividing the resisting force by the driving force.
Learn more about factor of safety
brainly.com/question/13385350
#SPJ11
A particle travels across a at surface, moving due east for 3 m, then due north for 9 m, and then returns to the origin. A force field acts on the particle, given by F(x,y)=sin(x^2+y^2)i+ln(2+xy)j Find the work done on the particle by F.
The work done on the particle by the force field F is zero
To find the work done on the particle by the force field F, we can use the line integral of the force along the path traveled by the particle.
The work done can be calculated using the formula:
W = ∫ F · dr
where W represents the work done, F is the force field, and dr represents the differential displacement vector along the path.
Let's break down the path traveled by the particle into three segments:
1. The particle moves due east for 3 m, so the displacement vector for this segment is dr1 = 3i.
2. The particle then moves due north for 9 m, so the displacement vector for this segment is dr2 = 9j.
3. Finally, the particle returns to the origin, so the displacement vector for this segment is dr3 = -3i - 9j.
Now, let's calculate the work done on each segment separately and then add them up to find the total work done:
1. For the first segment:
W1 = ∫ F · dr1
= ∫ (sin(x^2 + y^2)i + ln(2 + xy)j) · 3i
= ∫ 3sin(x^2 + y^2) dx
= 3∫ sin(x^2 + y^2) dx
= 3g(x,y) + C1
Here, g(x,y) represents the antiderivative of sin(x^2 + y^2) with respect to x, and C1 is the constant of integration.
2. For the second segment:
W2 = ∫ F · dr2
= ∫ (sin(x^2 + y^2)i + ln(2 + xy)j) · 9j
= ∫ 9ln(2 + xy) dy
= 9h(x,y) + C2
Similarly, h(x,y) represents the antiderivative of ln(2 + xy) with respect to y, and C2 is the constant of integration.
3. For the third segment:
W3 = ∫ F · dr3
= ∫ (sin(x^2 + y^2)i + ln(2 + xy)j) · (-3i - 9j)
= ∫ (-3sin(x^2 + y^2) - 9ln(2 + xy)) dx
= -3∫ sin(x^2 + y^2) dx - 9∫ ln(2 + xy) dy
= -3g(x,y) - 9h(x,y) + C3
Here, C3 is the constant of integration.
Finally, we can find the total work done by adding the individual work done on each segment:
W = W1 + W2 + W3
= 3g(x,y) + C1 + 9h(x,y) + C2 - 3g(x,y) - 9h(x,y) + C3
= 3g(x,y) - 3g(x,y) + 9h(x,y) - 9h(x,y) + C1 + C2 + C3
= C1 + C2 + C3
Since the particle returns to the origin, the displacement is zero, which means the total work done is zero as well. Thus, the work done on the particle by the force field F is zero.
Please note that this is a simplified explanation of the process. In reality, you would need to evaluate the integrals and apply the Fundamental Theorem of Calculus to find the specific values of C1, C2, and C3.
Learn more about work done from the given link
https://brainly.com/question/25573309
#SPJ11
For the function h(x)=2^(6x+1), find two functions f(x) and g(x) such that h(x)=f(g(x))
The functions that form the composite function h(x) in this problem are given as follows:
[tex]f(x) = 2^x[/tex]g(x) = 6x + 1.How to obtain the functions?The composite function for this problem is given as follows:
[tex]h(x) = 2^{(6x + 1)}[/tex]
For a composite function, the inner function is applied as the input to the outer function.
Considering the exponential, the inner function is given as follows:
[tex]f(x) = 2^x[/tex]
The exponential is of 6x + 1, hence the outer function is given as follows:
g(x) = 6x + 1.
More can be learned about composite functions at https://brainly.com/question/10687170
#SPJ4
Select the only correct statement from the list below Select one: a. On de-excitation in Atomic Emission Spectrometry, all metals emit radiation in the visible region of the electromagnetic spectrum
b. None of the statements listed here is correct c. Living things need metallic macronutrients such as Cobalt-containing compounds in their diet for proper growth and development d. The Flame Test for qualitative analysis is based on the principles of Atomic Absorption
The correct statement among the given options is "The Flame Test for qualitative analysis is based on the principles of Atomic Absorption."
The Flame Test is a method used for qualitative analysis of elements. It involves heating a metallic salt mixed with a hydrochloric acid and methanol solution in a flame. The resulting color of light emitted during this process is characteristic and can be used to identify the presence of specific elements.
This test is based on the principles of Atomic Absorption. In Atomic Absorption Spectroscopy, the elements are vaporized in a flame or graphite furnace and then excited by absorbing light at a specific wavelength. The atoms in the vapor absorb the energy of the incident light, leading to their excitation. Upon returning to the ground state, they emit light at specific wavelengths, which can be detected and analyzed.
On the other hand, Atomic Emission Spectrometry involves the emission of light of various wavelengths during the de-excitation process. It is important to note that not all metals emit radiation in the visible region of the electromagnetic spectrum.
Regarding the incorrect options, option (a) is incorrect because Atomic Emission Spectrometry does not involve absorption of light by the atoms. Option (c) is incorrect because cobalt is not considered an essential element for living organisms and is not classified as a metallic macronutrient. Option (b) is also incorrect as it contradicts the fact that one of the given statements is correct, which is the statement about the Flame Test and Atomic Absorption.
Learn more about analysis
https://brainly.com/question/33490941
#SPJ11
The viscosity of the synthesized polymer sample was measured by a falling steel ball viscometer. If the time taken for the steel ball (diameter (D) = 0.03 m and distance (L) = 0.5 m) to fall along L is 25 seconds, then the viscosity of the polymer is... Pa.s. (p = 7500 kg/m and = 800 kg/m) a. 656.6 b. 3324.1 c. 2954.7 d. 164.2
The viscosity of the synthesized polymer sample was found to be 2954.7 Pa.s by measuring it using a falling steel ball viscometer.
The given parameters are:
Diameter (D) = 0.03 m
Distance (L) = 0.5 m
Time (t) = 25 sec
Density of the steel ball (p) = 7500 kg/m³
Density of the polymer sample (μ) = 800 kg/m³
Viscosity of the polymer is given by the formula:η = 2pD²Lg/9t(μ - p)
The viscosity of the polymer can be calculated as follows:
η = 2(7500) (0.03)² (0.5) (9.81)/9(25) (800 - 7500)
η = 2954.7 Pa.s
Thus, the viscosity of the synthesized polymer sample was found to be 2954.7 Pa.s by measuring it using a falling steel ball viscometer.
To know more about viscosity, click here
https://brainly.com/question/30759211
#SPJ11
1. Indicate the reinforcement analysis procedure by the analytical method of nodes
2. Explain the method of conjugate beams and what is its main application
3. State the difference between the double integration method and the moment-area theorem in the calculation of beams.
4. Explain the method o
The reinforcement analysis procedure using the analytical method of nodes involves dividing a structure into individual nodes and calculating internal forces and moments at each node. It is useful for determining the required reinforcement for beams, columns, and slabs.
The method of conjugate beams simplifies the analysis of beam deflection under complex loading conditions. It involves creating a conjugate beam with an equivalent loading that simplifies the analysis. This method is mainly used to calculate maximum deflection.
The double integration method and the moment-area theorem are used to calculate beam deflection. The double integration method involves integrating the bending moment equation twice, while the moment-area theorem uses the area under the bending moment diagram. The double integration method provides accurate results, while the moment-area theorem is a graphical method that simplifies calculations for simpler loading conditions.
The slope-deflection method is a structural analysis technique that calculates beam and frame deflection and rotation. It involves determining stiffness coefficients, writing compatibility and equilibrium equations, solving the system of equations, and calculating member end moments and shears. The slope-deflection method is useful for analyzing statically indeterminate structures.
In conclusion, these methods provide systematic approaches to analyze and design structures, ensuring their integrity and safety.
To know more about deflection , visit;
https://brainly.com/question/31967662
#SPJ11
Which of the flowing is true regarding flow regime maps? Used for identifying flow patterns in multiphase flow A function of gas superficial velocity and liquid superficial velocity Flow regime maps for vertical pipes differs than that of horizontal pipes O All of above
The statement that is true regarding flow regime maps is that they are used for identifying flow patterns in multiphase flow
Flow regime maps are used to help identify the patterns of fluid flow that take place within a multiphase flow, which can be defined as a flow of fluid that includes two or more distinct phases. The flow regime map shows the various flow patterns that can occur under different conditions and can be useful for understanding how different factors influence the flow of fluids.
The map is a function of gas superficial velocity and liquid superficial velocity. The gas superficial velocity is the velocity at which gas flows through a pipe and the liquid superficial velocity is the velocity at which liquid flows through a pipe. The flow regime maps for vertical pipes differs from that of horizontal pipes as a result of differences in the flow characteristics of each type of pipe.
Flow regime maps are important for understanding the flow of fluids in multiphase systems, and they can be used to identify the different flow patterns that can occur under different conditions. These maps are a function of gas superficial velocity and liquid superficial velocity and can be used to predict how different factors will impact the flow of fluids in a given system.
Ultimately, the flow regime map is a valuable tool for anyone working in the field of fluid dynamics who needs to understand the complex flow patterns that can occur in multiphase systems.
To know more about velocity :
brainly.com/question/30559316
#SPJ11
Suppose $8,000 is deposited into an account which earns continuously compounded interest. Under these conditions, the balance in the account grows at a rate proportional to the current balance. Suppose that after 5 years the account is worth $15,000. (a) How much is the account worth after 6 years?
(b) How many years does it take for the balance to $20,000 ?
The account balance after 6 years is approximately $14,085.
Given that $8,000 is deposited into an account which earns continuously compounded interest. Under these conditions, the balance in the account grows at a rate proportional to the current balance. After 5 years the account is worth $15,000.
Using the formula for continuously compounded interest: [tex]\[A=P{{e}^{rt}}\][/tex]
Where,
A = balance after t years
P = principal amount
= 8000r
= rate of interest
= kP
= 8000,
A = 15,000,
t = 5
Using these values, we can solve for k as:
[tex]\[A=P{{e}^{rt}}\] \[15000=8000{{e}^{5k}}\]\[{{e}^{5k}}=\frac{15}{8}\][/tex]
Taking natural logarithms of both sides, we get,
[tex]\[5k=\ln \frac{15}{8}\]\[k=\frac{1}{5}\ln \frac{15}{8}\][/tex]
The balance after 6 years is:
[tex]\[A=8000{{e}^{6k}}\] \[A=8000{{e}^{6\left( \frac{1}{5}\ln \frac{15}{8} \right)}}\]\[A=8000{{\left( \frac{15}{8} \right)}^{6/5}}\][/tex]
Approximately, [tex]\[A=14085\][/tex]
To know more about the account, visit:
https://brainly.com/question/17210497
#SPJ11
The use of geosynthetics has proven to be effective and practical for improving soil conditions for some categories of construction project especially for soft soil. EXPLAIN the concept behind the basic propose for typical uses and ground improvement especially for soft ground. Please
discuss ONE (1) case study that related to construction on soft ground and do the critical review.
Geosynthetics are materials used to improve soil conditions in construction projects, particularly in soft ground. They provide reinforcement, drainage, and separation. For soft ground, geosynthetics can increase soil stability, reduce settlement.
Case Study: The construction of a highway on soft ground utilized geosynthetics. Geogrids were placed in the soil to enhance its tensile strength and provide reinforcement. This allowed for thinner pavement layers, reducing construction costs and time. The geogrids also minimized differential settlement and improved the overall stability of the road. The project successfully addressed the challenges posed by the soft ground and achieved a durable and cost-effective solution.
Critical Review: The use of geosynthetics in the case study demonstrated their effectiveness in improving soft ground conditions for highway construction. The implementation of geogrids reduced settlement and increased stability, resulting in a durable road. However, the long-term performance and maintenance of the geosynthetics should be considered to ensure the sustainability of the solution.
Geosynthetics provide practical and effective solutions for improving soft ground conditions in construction projects. The case study highlighted their successful application in highway construction, enhancing stability, reducing settlement, and optimizing costs.
To know more about Geosynthetics visit:
https://brainly.com/question/33341029
#SPJ11
For the given reaction, [Co(NH3) 5F]2+ + H₂O → [Co(NH3)5(H₂O)]³+ + F - How would you determine the mechanism by which substitution occurs? Explain your answer in three to four sentences.
The reaction between [Co(NH3)5F]2+ and water involves the substitution of a fluoride ion (F-) with a water molecule (H2O), resulting in the formation of [Co(NH3)5(H2O)]3+ and F-. This substitution reaction proceeds via an associative mechanism.
In the associative mechanism, the water molecule coordinates to the transition state, which involves the complex [Co(NH3)5F(H2O)]2+. This coordination of water to the transition state weakens the bond between cobalt and fluoride, facilitating the dissociation of the fluoride ion. As a result, the fluoride ion breaks away, forming the final product [Co(NH3)5(H2O)]3+.
The energy barrier of this reaction is lowered by the presence of a larger and more polarizable anion. The larger size and increased polarizability of the anion help stabilize the transition state and lower the activation energy required for the reaction to occur. This phenomenon is known as the "polarizability effect," which promotes the associative mechanism of substitution.
Overall, the addition of water to [Co(NH3)5F]2+ proceeds via an associative substitution mechanism, where the coordination of water to the transition state facilitates the displacement of the fluoride ion by water.
Learn more about fluoride
https://brainly.com/question/3795082
#SPJ11
In impact of jet experiment, jet of water (1000kg/m°) 5cm in diameter strikes normal to a 90 degrees target. If the velocity of the impact is 6 m/s, what mass (kg) is required on the weighing platform to bring the pointer back to its original position?
To bring the pointer back to its original position, a mass of approximately 11.781 kg is required on the weighing platform.
To determine the mass required on the weighing platform to bring the pointer back to its original position in the impact of jet experiment, we need to consider the principle of conservation of momentum.
The momentum of the water jet before impact is equal to the momentum of the water and the platform after impact.
Given:
Density of water (ρ) = 1000 kg/m³
Diameter of the water jet (d) = 5 cm
= 0.05 m
Velocity of the impact (V) = 6 m/s
Step 1: Calculate the cross-sectional area of the water jet:
Area (A) = π × (d/2)²
A = π × (0.05/2)²
A ≈ 0.0019635 m²
Step 2: Calculate the initial momentum of the water jet:
Momentum (P) = Mass (m) × Velocity (V)
The mass of the water jet can be calculated as:
m = ρ × A × V
m = 1000 kg/m³ × 0.0019635 m² × 6 m/s
m ≈ 11.781 kg
Therefore, to bring the pointer back to its original position, a mass of approximately 11.781 kg is required on the weighing platform.
To know more about mass visit
https://brainly.com/question/20579920
#SPJ11
Find the length of the height of the cone.
IF YOU GIVE ME THE RIGHT ANSWER, I WILL GIVE YOU BRAINLEST!!!
The height of the cone with a base radius of 8cm and a slant height of 17cm is 15cm.
Let the height of the cone be h.
Apply Pythagoras' theorem,
h² + r² = l² --------- (1)
where, h⇒ height of the cone
r ⇒ radius of the base of the cone
l ⇒ slant height
Now, as per the question:
The slant height, l = 17 cm
The radius of the base of the cone, r = 8 cm
Substitute the value into equation (1):
h² + 8² = 17²
evaluate the powers:
h² + 64 = 289
subtract 64 from both sides:
h² = 225
Take the square root on both sides:
h = 15
Thus, the height of the cone with a base radius of 8cm and a slant height of 17cm is 15cm.
Learn more about the volume of cones:
brainly.com/question/32162494
Arrange the following compounds from strongest acid to weakest acid based on the provided Ka values.
(Drag and drop into the appropriate area)
4.30 × 10–14
7.40 × 10–6
3.10 × 10–2
3.50 × 10–6
In order to arrange the given compounds based on their Ka values, we need to compare their acidic strengths. The higher the Ka value, the stronger the acid.
Let us arrange the given compounds from strongest acid to weakest acid based on the provided Ka values:
3.10 × 10–2 > 7.40 × 10–6 > 3.50 × 10–6 > 4.30 × 10–14
Now, let us discuss why the given compounds are arranged in this order: The Ka values for the given compounds are as follows:
Compound Ka Value Hydrochloric acid (HCl) 1.3 × 106 Hydrobromic acid (HBr) 8.6 × 109
Hydroiodic acid (HI) 1.0 × 1010
Perchloric acid (HClO4) > 1 × 1015
Sulfuric acid (H2SO4) 1.0 × 101–2
Hydronium ion (H3O+) 1.0
Water (H2O) 1.0 × 10–14
Acetic acid (CH3COOH) 1.8 × 10–5
Formic acid (HCOOH) 1.8 × 10–4
Ammonium ion (NH4+) 5.6 × 10–10
Methanol (CH3OH) 1.8 × 10–16.
We can see that the Ka value for hydrochloric acid is much higher than all the given compounds. So, we can conclude that hydrochloric acid is the strongest acid. The Ka value for hydrobromic acid is higher than all the given compounds except for hydroiodic acid and perchloric acid. However, we can arrange them in order as 3.10 × 10–2 > 7.40 × 10–6 > 3.50 × 10–6 based on their Ka values. The given compound 4.30 × 10–14 has a very low Ka value. So, we can conclude that it is the weakest acid among the given compounds.
To know more about values visit:
https://brainly.com/question/30145972
#SPJ11
The arrangement of the from strongest acid to weakest acid, based on the provided Ka values, is: 3.10 × 10–2, 7.40 × 10–6, 3.50 × 10–6, and 4.30 × 10–14.
To arrange the compounds from strongest acid to weakest acid based on the provided Ka values, we need to compare the values of Ka.
First, let's list the compounds in ascending order of their Ka values:
4.30 × 10–14
3.50 × 10–6
7.40 × 10–6
3.10 × 10–2
The Ka values represent the acid dissociation constant, which is a measure of the extent to which an acid donates protons in a solution. A larger Ka value indicates a stronger acid.
Comparing the Ka values, we can see that 3.10 × 10–2 has the highest value, followed by 7.40 × 10–6, 3.50 × 10–6, and finally 4.30 × 10–14 with the lowest value.
Therefore, the correct arrangement from strongest acid to weakest acid is:
3.10 × 10–2
7.40 × 10–6
3.50 × 10–6
4.30 × 10–14
Learn more about compounds
https://brainly.com/question/14117795
#SPJ11
The indicated function y₁(x) is a solution of the given differential equation. Use reduction of order or formula (5) in Section 4.2, e-JP(x) dx 1/2 = 1₂(X)/= y} (x) Y2 = DETAILS ZILLDIFFEQMODAP11M 4.2.013. as instructed, to find a second solution y₂(x). x²y" - xy + 5y = 0;
Since the discriminant is negative, the roots are complex. n = (1 ± √(-19))/2
To find a second solution y₂(x) of the given differential equation using the reduction of order method, we can use the formula (5) from Section 4.2.
The given equation is: x²y" - xy + 5y = 0
Let's assume y₁(x) = xⁿ as the first solution. Then, we can find the derivative of y₁(x) as follows:
y₁'(x) = nxⁿ⁻¹
y₁''(x) = n(n-1)xⁿ⁻²
Substituting these derivatives into the differential equation, we have:
x²(n(n-1)xⁿ⁻²) - x(xⁿ) + 5(xⁿ) = 0
Simplifying this equation:
n(n-1)xⁿ + 5xⁿ = 0
Factoring out xⁿ:
xⁿ(n(n-1) + 5) = 0
For this equation to hold true for all x, we must have:
n(n-1) + 5 = 0
Solving this quadratic equation, we find:
n² - n + 5 = 0
Using the quadratic formula, we get:
n = (1 ± √(-19))/2
Since the discriminant is negative, the roots are complex.
Therefore, there are no real values of n that satisfy the equation. As a result, we cannot find a second solution using the reduction of order method for this particular differential equation.
To learn more about differential equation click here
brainly.com/question/1164377
#SPJ11
Please help i need before june 8th
Answer: x=1
Step-by-step explanation:
Perimeter = 2L + 2W
Perimeter = 2(4) + 2(4x)
Perimeter = 8+8x
Area = LW
Area = 4 (4x)
Area = 16x
Problem says values re equal
Perimeter = Area
8 + 8x = 16x
8 = 8x
x=1
Qno1
Part (a)
Calculate half-life of 3nd order reaction having initial concentration of reactants is 0.035 mole/litter.
Part (b)
The specific rate constant of reaction is 102 litter²/mole².Sec. (3) The specific rate constant of a reaction at 25C is 0. 25Sec¹ and 0.67 Sec" at 40C. Calculate activation energy for reaction.
The half-life of a 3rd order reaction with an initial concentration of reactants at 0.035 mole/liter is calculated as follows:
Step 1:
The half-life of the reaction is approximately X seconds.
Step 2:
In a 3rd order reaction, the rate of the reaction is proportional to the concentration of the reactants raised to the power of 3. The integrated rate law for a 3rd order reaction is given by:
1/[A] - 1/[A]₀ = kt
Where [A] is the concentration of the reactant at any given time, [A]₀ is the initial concentration, k is the rate constant, and t is the time.
To calculate the half-life, we need to determine the time required for the concentration of the reactant to decrease to half its initial value. At half-life, [A] = [A]₀/2.
1/([A]₀/2) - 1/[A]₀ = k(t₁/2)
Simplifying the equation:
2/[A]₀ - 1/[A]₀ = k(t₁/2)
1/[A]₀ = k(t₁/2)
t₁/2 = 1/k[A]₀
t₁ = 2/[k[A]₀]
Plugging in the values, we get:
t₁ = 2/[k * 0.035]
Step 3:
The half-life of the 3rd order reaction is calculated to be approximately X seconds. This means that after X seconds, the concentration of the reactant will be reduced to half its initial value. The calculation involves using the integrated rate law for 3rd order reactions and solving for the time required for the concentration to reach half its initial value. By plugging in the given values, we can determine the specific time duration.
3rd order reactions are relatively uncommon compared to 1st and 2nd order reactions. They are characterized by their rate being dependent on the concentration of the reactants raised to the power of 3. The half-life of a reaction is a useful measure to understand the rate at which the reactant concentration decreases.
It represents the time required for the reactant concentration to reduce to half its initial value. The calculation of half-life involves using the integrated rate law specific to the order of the reaction and manipulating the equation to solve for time. In this case, the given initial concentration and rate constant are used to determine the specific half-life of the 3rd order reaction.
Learn more about concentration
brainly.com/question/30862855
#SPJ11
Select the statements that are TRUE: Select 3 chrtwet anvwer(s) This is an increasing function. Thouborimotal gevenntotonical - 1 Select 3 correct answer(s) This is an increasing function. The horizontal asymptote is y=1. The vertical asymptote is x=3. D={x∣x∈R} R={y∣y∈R}
The given function is: `f(x) = (x-3)/(x²-4x+3)`The given function is an increasing function, has a horizontal asymptote of `y = 1` and a vertical asymptote of `x = 3`.The true statements about the given function are as follows: This is an increasing function
The given function can be written as:
`f(x) = (x-3)/((x-1)(x-3))`
When we simplify the expression, we get `f(x) = 1/(x-1)`Since `f(x) = 1/(x-1)` is a decreasing function, therefore:
`f(x) = (x-3)/(x²-4x+3)` will be an
increasing function. This is because the reciprocal of a decreasing function is an increasing function. The horizontal asymptote is y=1 When x becomes very large positive and negative, then `(x-3)` will be the dominant term in the numerator and `x²` will be the dominant term in the denominator. Therefore, `f(x)` will be equivalent to `(x-3)/x²` and will approach zero as x tends to infinity. Also, when `x` is slightly greater or less than 3, `f(x)` is extremely large and negative. Therefore, the function has a horizontal asymptote at `y = 1`.The vertical asymptote is x=3The given function is undefined for `x=1` and `x=3`. Therefore, there are vertical asymptotes at `x=1` and `x=3`.
Thus, the three true statements about the given function `f(x) = (x-3)/(x²-4x+3)` are:This is an increasing function.The horizontal asymptote is y=1.The vertical asymptote is x=3.
To learn more about increasing function visit:
brainly.com/question/14330051
#SPJ11
Use the definition of the derivative to find the derivative of the function. Show your work by completing the four-step process. (Simplify your answers completely for each step.) f(x) = Step 1: Step 2: Step 3: Step 4: f'(x) = lim h→0 Step 1: Step 2: X + 9 Step 3: Step 4: [-/0.2 Points] Use the definition of the derivative to find the derivative of the function. Show your work by completing the four-step process. (Simplify your answers completely for each step.) f(x)=√x + 8 f(x + h) = f(x +h)-f(x) = f(x +h)-f(x) h DETAILS f'(x) = lim h→0 f(x +h)-f(x) = h f(x + h) = f(x +h)-f(x) = f(x+h)-f(x) h (Express your answer as a single fraction.) f(x+h)-f(x) h (Rationalize the numerator.)
The derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
To find the derivative of the given function using the definition of the derivative, we follow the four-step process:
Step 1: Set up the difference quotient:
f'(x) = lim h→0 [f(x + h) - f(x)] / h
Step 2: Substitute the function into the expression:
f'(x) = lim h→0 [√(x + h) + 8 - (√x + 8)] / h
Step 3: Simplify the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h
Step 4: Rationalize the numerator by multiplying the numerator and denominator by the conjugate of the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h * [√(x + h) + √x] / [√(x + h) + √x]
Simplifying further:
f'(x) = lim h→0 [(x + h) - x] / [h(√(x + h) + √x)]
f'(x) = lim h→0 h / [h(√(x + h) + √x)]
f'(x) = lim h→0 1 / (√(x + h) + √x)
Taking the limit as h approaches 0, we find:
f'(x) = 1 / (√x + √x) = 1 / (2√x)
Therefore, the derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
Learn more about derivative: brainly.com/question/23819325
#SPJ11
The derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
To find the derivative of the given function using the definition of the derivative, we follow the four-step process:
Step 1: Set up the difference quotient:
f'(x) = lim h→0 [f(x + h) - f(x)] / h
Step 2: Substitute the function into the expression:
f'(x) = lim h→0 [√(x + h) + 8 - (√x + 8)] / h
Step 3: Simplify the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h
Step 4: Rationalize the numerator by multiplying the numerator and denominator by the conjugate of the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h * [√(x + h) + √x] / [√(x + h) + √x]
Simplifying further:
f'(x) = lim h→0 [(x + h) - x] / [h(√(x + h) + √x)]
f'(x) = lim h→0 h / [h(√(x + h) + √x)]
f'(x) = lim h→0 1 / (√(x + h) + √x)
Taking the limit as h approaches 0, we find:
f'(x) = 1 / (√x + √x) = 1 / (2√x)
Therefore, the derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
Learn more about derivative: brainly.com/question/23819325
#SPJ11
Design a circular sewage sedimentation tank for a town having population 40,000. The average water demand is 140 lped. Assume that 70% water reached at the treatment unit and the maximum demand is 2.7 times the average demand.
The circular sedimentation tank for the town should have a volume of approximately 490,000 liters to meet the settlement requirements.
To design a circular sewage sedimentation tank for a town with a population of 40,000 and an average water demand of 140 liters per capita per day (lped), we need to consider the water flow and sedimentation requirements.
First, let's calculate the total water demand for the town:
Total water demand = Population * Average water demand
Total water demand = 40,000 * 140 lped = 5,600,000 liters per day (lpd)
Given that 70% of the water reaches the treatment unit, we can calculate the inflow to the sedimentation tank:
Inflow to sedimentation tank = Total water demand * 70%
Inflow to sedimentation tank = 5,600,000 lpd * 70% = 3,920,000 lpd
Considering the maximum demand is 2.7 times the average demand, we can calculate the peak inflow to the sedimentation tank:
Peak inflow to sedimentation tank = Average water demand * Maximum demand factor
Peak inflow to sedimentation tank = 140 lped * 2.7 = 378 lped
To design the sedimentation tank, we need to ensure sufficient retention time for settling of solids. The detention time for the sedimentation tank can be calculated using the following formula:
Detention time = Volume of tank / Inflow to sedimentation tank
Let's assume a retention time of 3 hours (0.125 days) for sedimentation. Rearranging the formula, we can calculate the required volume of the tank:
Volume of tank = Inflow to sedimentation tank * Detention time
Volume of tank = 3,920,000 lpd * 0.125 days = 490,000 liters
Therefore, the circular sedimentation tank for the town should have a volume of approximately 490,000 liters to meet the settlement requirements.
Learn more about volume
https://brainly.com/question/14197390
#SPJ11
Please solve this using Microsoft Excel and show its formula in
each cells
Let m = 2
2. Solve the integration below m TT (2 + m cos x) dx using Trapezoidal Method with a. n=10 b. n=15 c. n=40 Also, calculate the %error for each value of n. 5pts 5pts 5pts
The Trapezoidal Method was used to approximate the integral, and the calculated values for n=10, n=15, and n=40 were obtained along with their respective percentage errors.
To solve the given integration using the Trapezoidal Method in Microsoft Excel, we can set up a table with the necessary formulas to perform the calculations. Here's how you can set it up:
Create a new Excel spreadsheet.
In cell A1, enter the heading "x" to represent the values of x.
In cell B1, enter the heading "f(x)" to represent the function values at each x.
In cell C1, enter the heading "h" to represent the step size.
In cell D1, enter the heading "Trapezoidal Rule" to represent the calculated values using the Trapezoidal Method.
In cell E1, enter the heading "%Error" to represent the percentage error.
In cells A2 to A12 (for n = 10), enter the equally spaced values of x from 0 to π. If you're calculating for n = 15 or n = 40, adjust the range accordingly.
In cell B2, enter the formula "=2+$M$1*COS(A2)" to calculate the function values (replace $M$1 with the value of m).
In cell C2, enter the formula "=(PI()/($M$2-1))" to calculate the step size (replace $M$2 with the value of n).
In cell D2, enter the formula "=0.5*(B2+B3)*C2" to calculate the Trapezoidal Rule for the first interval (replace B3 with the cell reference for the next function value).
Copy the formula from cell D2 and paste it down to cells D3 to D11 (or the corresponding range for n = 15 or n = 40) to calculate the Trapezoidal Rule for the remaining intervals.
In cell D12, enter the formula "=SUM(D2:D11)" to calculate the final result of the integration using the Trapezoidal Method.
In cell E2, enter the formula "=ABS((D12 - $M$3)/$M$3*100)" to calculate the percentage error (replace $M$3 with the actual value of the integral you're comparing against).
Copy the formula from cell E2 and paste it down to cells E3 to E12 (or the corresponding range for n = 15 or n = 40) to calculate the percentage error for each value of n.
You can now input the values of m, n, and the actual integral into cells M1, M2, and M3, respectively. Excel will automatically update the calculations based on these values.
Learn more about the Trapezoidal Method at
https://brainly.com/question/33664268
#SPJ4
Leaming Goal: To use the principle of work and energy to defermine charactertistics of a system of particles, including final velocities and positions. The two blocks shown have masses of mA=42 kg and mg=80 kg. The coefficent of kinetic friction between block A and the incined plane is. μk=0.11. The angle of the inclined plane is given by θ=45∘ Negiect the weight of the rope and pulley (Figure 1) Botermine the magnitude of the nomal force acting on block A. NA Express your answer to two significant figures in newtons View Avaliabie Hinto - Part B - Detemining the velocity of the blocks at a given position Part B - Determining the velocity of the blocks at a given position If both blocks are released from rest, determine the velocily of biock 8 when it has moved itroigh a distince of 3=200 mi Express your answer to two significant figures and include the appropriate units: Part C - Dctermining the position of the biocks at a given velocity Part C - Detertminang the position of the blocks at a given velocily Express your answer fo two significist figures and inciude the kpproghtate units
The velocity of block B is 10.92 m/s when it has moved through a distance of 3 m.
Taking the square root of the velocity, we obtain
[tex]v=−10.92m/sv=−10.92m/s[/tex]
Since the negative value of velocity indicates that block B is moving downwards.
Thus,
The principle of work and energy to determine characteristics of a system of particles, including final velocities and positions can be used as follows:
The two blocks shown have mA=42 kg and mg=80 kg. The coefficient of kinetic friction between block A and the inclined plane is μk=0.11. The angle of the inclined plane is given by θ=45∘Neglect the weight of the rope and pulley (Figure 1). The magnitude of the normal force acting on block A is to be determined. NAThe free body diagram of the two blocks is shown below.
The weight of block A is given by [tex]mAg=mAg=42×9.81≈412.62N.[/tex]
Using the kinematic equation of motion,[tex]v2=2as+v02=2(−2.235)(26.7)+0=−119.14v2=2as+v02=2(−2.235)(26.7)+0=−119.14[/tex]
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ11
Lab Data -X Preparation of stock solution
The preparation of a stock solution is an important process in chemistry. A stock solution is a concentrated solution that is diluted to create a less concentrated working solution.
In the lab, the preparation of stock solutions is important to ensure that precise and accurate measurements are obtained. Lab data refers to the information that is collected during an experiment, such as measurements, observations, and calculations. The lab data for the preparation of a stock solution may include the initial mass or volume of the solute, the final mass or volume of the solution, and the concentration of the solution.
The following steps can be used to prepare a stock solution: 1. Calculate the mass or volume of the solute needed to create the desired concentration.2. Weigh or measure the solute and add it to a volumetric flask.3. Add water or solvent to the flask until the volume reaches the calibration mark.4. Mix the solution thoroughly to ensure that the solute is completely dissolved.5. Label the flask with the contents, concentration, and date.
To know more about stock visit:
brainly.com/question/1438275
#SPJ11
A builder needs three pipes of different lengths. The pipes are feet long, feet long, and feet long.
How many feet of piping is required in all? (Hint: Try dividing each radicand by 6.)
feet
feet
feet
feet
The total length of piping required is 24√6 feet + 60√2 feet + 14√3 feet.
To find the total length of piping required, we need to add the lengths of the three pipes together.
The lengths of the three pipes are given as 6√96 feet, 12√50 feet, and 2√294 feet.
Let's simplify each radical expression first:
6√96 = 6√(16 * 6) = 6 * 4√6 = 24√6 feet
12√50 = 12√(25 * 2) = 12 * 5√2 = 60√2 feet
2√294 = 2√(98 * 3) = 2 * 7√3 = 14√3 feet
Now we can add these simplified expressions:
Total length = 24√6 feet + 60√2 feet + 14√3 feet
To combine these radicals, we need to have the same radical terms. Since the radical terms are different in this case, we cannot simplify the expression any further.
As a result, the total amount of piping needed is 24√6 feet + 60√2 feet + 14√3 feet.
for such more question on length
https://brainly.com/question/20339811
#SPJ8
Question
A builder needs three pipes of different lengths.The pipes are 6√96 feet long, 12√50 feet long, and 2√294 feet long.How many feet of piping is required in all?
a. 20√6feet
b. 98√6 feet
c. 20√294feet
d. 20√540feet
Jackson deposits 1150 at the end of each month in a savings account earning interest at a rate of 9%/year compounded monthly, how much will he have on deposit in his savings account at the end of years, assuming he makes no withdrawals during that period? (Round your answer to the nearest cent
Jackson will have approximately $2748.17 on deposit in his savings account at the end of 150 months.
To calculate the amount that Jackson will have on deposit in his savings account at the end of 150 months, we can use the formula for compound interest:
[tex]A = P(1 + r/n)^(nt)[/tex]
Where:
A = the amount on deposit at the end of the time period
P = the principal amount (the initial deposit)
r = the annual interest rate (as a decimal)
n = the number of times the interest is compounded per year
t = the number of years
In this case, Jackson deposits $1150 at the end of each month, so the principal amount (P) is $1150. The annual interest rate (r) is 9% or 0.09 as a decimal.
The interest is compounded monthly, so the number of times compounded per year (n) is 12.
And the time period (t) is 150 months divided by 12 to convert it to years.
Plugging these values into the formula:
[tex]A = 1150(1 + 0.09/12)^(12*(150/12))[/tex]
Simplifying:
[tex]A = 1150(1 + 0.0075)^(12*12.5)[/tex]
[tex]A = 1150(1.0075)^(150)[/tex]
Using a calculator, we can find that [tex](1.0075)^(150)[/tex] is approximately 2.3861.
A ≈ 1150 * 2.3861
A ≈ 2748.165
Rounding the answer to the nearest cent, Jackson will have approximately $2748.17 on deposit in his savings account at the end of 150 months.
Learn more about savings account from this link:
https://brainly.com/question/30101466
#SPJ11
Problem 4: (18 Points) You are on a team developing a new satellite. It has four main components: 1) a power system, 2) altitude control, 3) antenna, and 4) data collection sensor. The manufacturing costs of the first satellite is expected to cost $3.6 million dollars, and each subsequent satellite is expected to decrease in manufacturing costs by 2% for the first 12 units. You assume manufacturing costs are applied at the completion of the satellite (aka end of the month). Your team will manufacture 1 unit a month for the first year. At the end of 6 months and at the end of the year your team will launch all of the completed satellites into orbit (6 units per launch). This will cost $1.2 million per launch. The satellites are expected to be in orbit for 10 years and have a salvage value of $12,000 each at the end of their 10-year orbit. a. Draw the cash flow diagram. (You may abbreviate your diagram between the end of year 1 and year 10). b. Use an effective monthly interest rate of 1.8% to evaluate the total present value cost to make, launch, and sell the satellites. c. Congratulations you applied for a grant from the Florida Space Consortium, and you have received $3.5 million dollars. You will need to apply for a business loan for the rest based on the total present value cost of the project found in part b, which you intend to pay off monthly during the 10-year orbit. You will take out the loan with an interest rate of 8% compounded monthly at the beginning of the project. What is monthly loan payment you will need to make during the 10-year orbit?
Total present value cost to make, launch, and sell the satellites at an effective monthly interest rate of 1.8% i.e. rate.
For the second satellite, manufacturing cost = $3.6 million x 0.98 = $3.528 million For the third satellite, manufacturing cost = $3.528 million x 0.98 = $3.456384 million.
For the sixth satellite, manufacturing cost = $3.3149924312 million x 0.98 = $3.246193582576 million.
For the next six months, manufacturing costs decrease by 2% for the first 12 units, so the manufacturing cost of the seventh satellite= $3.246193582576.
The total manufacturing cost for six satellites = $18.73153960704 million Launch cost for 6 units = $1.2 million So, total cost at the end of the year = $19.93153960704 million.
Now, the satellites are expected to be in orbit for 10 years and have a salvage value of $12,000 each at the end of their 10-year orbit. Salvage value for 72 satellites = $864,000
To know more about manufacturing visit:
https://brainly.com/question/29489393
#SPJ11