Using differentials to estimate the amount of steel on a closed propane tank if the thickness of the steel sheet has 2 cm. The tank has two hemispherical parts of 1.2 meters in diameter, the estimated amount of steel in the closed propane tank is approximately 0.18 cubic meters.
The amount of steel in a closed propane tank can be estimated using differentials. To identify the amount of steel, we need to calculate the surface area of the tank. The tank consists of two hemispherical parts with a diameter of 1.2 meters each.
First, let's calculate the surface area of one hemisphere. The formula for the surface area of a sphere is given by A = 4πr², where r is the radius. Since the diameter is given, we can calculate the radius as half the diameter:
r = 1.2/2 = 0.6 meters.
Now, let's calculate the surface area of one hemisphere: A₁ = 4π(0.6)² = 4π(0.36) ≈ 4.52 square meters. since the tank consists of two hemispheres, we need to multiply the surface area of one hemisphere by 2 to get the total surface area of the tank:
A_total = 2 * A₁ = 2 * 4.52 ≈ 9.04 square meters.
To estimate the amount of steel, we need to consider the thickness of the steel sheet, which is 2 cm. We can convert this to meters by dividing by 100: t = 2/100 = 0.02 meters. Finally, we can calculate the volume of steel by multiplying the surface area by the thickness:
V_steel = A_total * t = 9.04 * 0.02 ≈ 0.18 cubic meters.
You can learn more about steel at: brainly.com/question/29266446
#SPJ11
Molecule has 2 Sulfur atoms, 1 Si atom, and 2 Hydrogen atoms What is the molecular shape? What is the hybridization on the central atom? Is this compound polar or non polar?
The molecular shape, hybridization, and polarity of a molecule with 2 sulfur atoms, 1 silicon atom, and 2 hydrogen atoms depend on the specific arrangement of the atoms, bonding pattern, and presence of lone pairs, requiring more information for a definitive answer.
Regarding the hybridization of the central silicon atom, without more information, it is challenging to determine the exact hybridization. Silicon typically forms bonds using sp3 hybrid orbitals, but the specific hybridization depends on the bonding arrangement and the number of lone pairs.
The polarity of the molecule depends on the electronegativity difference between the atoms and the molecular geometry. If the molecule has a symmetrical arrangement and there are no polar bonds, the molecule will be nonpolar. However, if there are polar bonds or an asymmetrical arrangement, the molecule may be polar.
To know more about molecule,
https://brainly.com/question/30164580
#SPJ11
An open concrete aqueduct of surface roughness & = 0.01 ft has a rectangular cross section. The aqueduct is 8 ft wide, and falls 7 ft in elevation for each mile of length. It is to carry 100,000 gpm of water at 60 °F. If ff = 0.0049, what is the minimum depth needed if the aqueduct is not to overflow?
The minimum depth required for the aqueduct not to overflow is 6.63 ft. For open channel flow, the Chezy's equation is given by
C =[tex](g R h)^{0.5[/tex] / f
Where C is Chezy's coefficient and h is the depth of flow.
Width of the aqueduct, b = 8 ft
Falls 7 ft in elevation for each mile of length, S = 7 ft/mile
Water flow rate, Q = 100,000 gpm
Water temperature, T = 60 °F
Friction factor, f = 0.0049
Surface roughness, ε = 0.01 ft
Let D be the depth of the aqueduct.
Then the hydraulic radius, R is given by the formula,
R = D/2
Hence, the velocity, V of flow is given by
V = [tex]C (R h)^{0.5[/tex]
where g is the acceleration due to gravity
The discharge, Q is given by
Q = V b h
where b is the width of the channel.
Now, the minimum depth required for the aqueduct not to overflow is given by
h = Q / (V b)
For Chezy's equation
C = [tex](g R h)^{0.5[/tex]/ f
Putting the value of R in the above equation
C = [tex](g D/2 h)^{0.5[/tex] / f
Putting the value of V in the equation for discharge
Q = [tex]C (R h)^{0.5} b[/tex]
The above two equations can be written as
Q =[tex](g D^2 / 4f) h^{(5/2)[/tex]
Therefore,
h =[tex][Q f / (g D^2 / 4)]^{(2/5)[/tex]
Now, putting the given values in the above equation, we get
h = [100,000 x 0.0049 / (32.2 x (8 + 2 ε) x 7 / 5,280)^2]^(2/5)
h = 6.63 ft
Therefore, the minimum depth required for the aqueduct not to overflow is 6.63 ft.
Answer: The minimum depth required for the aqueduct not to overflow is 6.63 ft.
Learn more about Chezy's equation
https://brainly.com/question/33303500
#SPJ11
7. After a quality audit there is a guarantee that aspecific structural ceramic part has no surface defects larger than 25 μm. Caluclate the maximum tensile stress that can occur before failure for SiC (Kic=3MPavm) and for stabilized zirconia (ZrO2) (K₁c =9MPavm) ZrO₂ 7. σğic = 339 Mpa ; σε = 1015 Mpa
In a quality audit, there is a guarantee that a specific structural ceramic part has no surface defects larger than 25 μm.
In this case, we are asked to calculate the maximum tensile stress that can occur before failure for SiC (Kic=3 MPa√m) and for stabilized zirconia (ZrO2) (K₁c = 9 MPa√m) ZrO₂.
For ZrO2, we are given that σğic = 339 MPa and σε = 1015 MPa.σ₀= Y × (Kic/πc)^2 for a surface defect of length c.
Substituting c = 25 μm and Kic=3 MPa√m for SiC,σ₀
= (2 × 3/π × 0.025)^2 × (0.5 × 440)
= 269.94 MP
aσ₀ = (2 × 9/π × 0.025)^2 × (0.5 × 440) = 809.83 MPa for stabilized zirconia (ZrO2)
The maximum tensile stress that can occur before failure for SiC is σ₀ = 269.94 MPa while for stabilized zirconia (ZrO2) is σ₀ = 809.83 MPa.
Therefore, we can conclude that the stabilized zirconia (ZrO2) is stronger than SiC.
To know more about quality audit visit:
https://brainly.com/question/32615611
#SPJ11
At what altitude habove the north pole is the weight of an object reduced to 78% of its earth-surface value? Assume a spherical earth of radius k and express h in terms of R. Answer:h= R
The altitude h above the north pole at which the weight of an object is reduced to 78% of its earth-surface value is approximately 2845 km above the surface.
The weight of an object is reduced to 78% of its earth-surface value when an object is at an altitude of 2845 km above the north pole.
This can be found by using the equation W = GMm/r²,
where W is the weight of the object, M is the mass of the earth, m is the mass of the object, r is the distance from the center of the earth, and G is the gravitational constant.
The weight of the object is 78% of its surface weight, so we can set W = 0.78mg,
where g is the acceleration due to gravity on the surface of the earth. The distance from the center of the earth to the object is R + h, where R is the radius of the earth and h is the altitude above the surface.
Therefore, the equation becomes:0.78mg = GMm/(R + h)²Simplifying, we get:0.78g = GM/(R + h)²
Dividing both sides by g and multiplying by (R + h)², we get:0.78(R + h)² = GM/g
Solving for h, we get:h = R(2.845)
Therefore, the altitude h above the north pole at which the weight of an object is reduced to 78% of its earth-surface value is approximately 2845 km above the surface.
Learn more about altitude
https://brainly.com/question/15709691
#SPJ11
To promote sintering and densification during firing of a ceramic, the average particle size of the starting powder should be as small as possible because: Select one: OA. it maximises the bulk density of the powder compact which, in turn, will tend to maximise the bulk density of the final fired article. OB. it increases the surface area of the powder which promotes evaporation condensation as a sintering mechanism. O C. it maximises the thermodynamic driving force for sintering. O D. it decreases the average coordination number of the particles, hence promoting sintering. O E. a small average particle size results in less grain growth. O F. all of the above O G. none of the above
A small average particle size in the starting powder promotes sintering and densification during the firing of ceramics. It maximizes the bulk density of the powder compact and enhances the thermodynamic driving force for sintering. Hence, options A and B both are correct.
To promote sintering and densification during the firing of ceramics, it is desirable to have a small average particle size for the starting powder. This is because a smaller particle size maximizes the bulk density of the powder compact, which, in turn, increases the overall density of the final fired article.
Sintering is a process used to create ceramic materials that are difficult to mold through conventional means. It involves subjecting the powder to high temperatures, causing the particles to bond together and form a solid structure. The small particle size of the starting powder enhances the bulk density of the powder compact, leading to improved densification in the final fired product.
To achieve effective sintering, it is important to maximize the thermodynamic driving force. Sintering is an energy-intensive process, as it requires a high-energy state to fuse the particles together. A small particle size increases the surface area of the powder, promoting evaporation and condensation as sintering mechanisms. This enhances the thermodynamic driving force and facilitates the sintering process.
It should be noted that the average coordination number of the particles is not influenced by the particle size, so it does not directly promote sintering. Additionally, a small average particle size does not necessarily result in reduced grain growth. Grain growth may occur if the temperature during sintering is too high, which can be a factor independent of the particle size.
In conclusion, a small average particle size in the starting powder is beneficial for sintering and densification during the firing of ceramics. It maximizes bulk density, promotes evaporation-condensation mechanisms, and increases the thermodynamic driving force for sintering. Hence, option A and B both are correct.
Learn more about bulk density
https://brainly.com/question/31578008
#SPJ11
21.) When ammonium oxalate is added to a solution containing a mixture of ions, a 21.) white solid appears. Based on this result, which ion is most likely to be present in the solution? a.) Pb^ 2+ b.) Ca^ 2+ c.) Al^ 3+ d.) Cu^ 2+
b). Ca^ 2+. is the correct option. Ammonium oxalate is added to a solution containing a mixture of ions, a white solid appears. Based on this result Ca^ 2+. is most likely to be present in the solution.
Ammonium oxalate is used as a reagent to identify calcium ions. Calcium ions, when mixed with ammonium oxalate, form a white precipitate.
Therefore, based on the white solid appearing, the ion that is most likely to be present in the solution is b.) Ca^ 2+.
What is ammonium oxalate? Ammonium oxalate is a white crystalline solid with the chemical formula C2H8N2O4, which is the ammonium salt of oxalic acid.
The salt is highly soluble in water and is used as a reducing agent, a mordant for dyes, and a reagent for the identification of calcium. It is a solid, white in color, and is readily soluble in water.
To know more about Ammonium oxalate visit:
brainly.com/question/2285046
#SPJ11
A certain radioactive material in known to decay at the rate propo- tional to the amount present. If initially there is 100 miligrams of the material present and after two hours it is observed that the material has lost 10 percent of its original mass. By using growth population formula, dx dt = kx, find
i. an expression for the mass of the material remaining at any time t.
ii. the mass of the material after five hours.
iii. the time at which the material has decayed to one half of its initial mass.
Radioactive decay equation: i. x(t) = 100 * [tex]e^(kt)[/tex] ii. x(5) = 100 *[tex]e^((5/2)[/tex]*(ln(90)-ln(100))) iii. t = 2 * (ln(50) - ln(100)) / (ln(90) - ln(100)).
To find the expression for the mass of the radioactive material remaining at any time t, we can use the growth population formula dx/dt = kx, where x represents the mass of the material at time t, and k is the proportionality constant (decay rate).
i. Expression for the mass remaining at any time t:
Let x(t) be the mass of the material at time t. We know that after two hours, the material has lost 10 percent of its original mass (100 milligrams). So, after 2 hours, the remaining mass is 90 milligrams (100 mg - 10% of 100 mg).Now, we can set up the initial value problem:x(0) = 100 mg (initial mass)x(2) = 90 mg (mass after 2 hours)To solve this, we can separate variables and integrate:
dx/x = k dt∫(1/x) dx = ∫k dtln|x| = kt + CWhere C is the constant of integration. Now, we can solve for C using the initial condition x(0) = 100 mg:ln|100| = 0 + CC = ln(100)So, the expression for the mass remaining at any time t is:
ln|x| = kt + ln(100)ii. The mass of the material after five hours:
Now, we need to find the value of x(5). Using the initial condition x(0) = 100 mg, we can plug in t = 5 into the expression we found earlier:ln|x| = k(5) + ln(100)ln|x| = 5k + ln(100)To find k, we can use the information that after 2 hours, the mass is 90 mg:
ln(90) = 2k + ln(100)Solving for k:2k = ln(90) - ln(100)k = (ln(90) - ln(100)) / 2Now, we can find x(5):
ln|x| = 5 * ((ln(90) - ln(100)) / 2) + ln(100)ln|x| = (5/2) * (ln(90) - ln(100)) + ln(100)x = e[tex]^((5/2)[/tex]* (ln(90) - ln(100)) + ln(100))iii. The time at which the material has decayed to one half of its initial mass:
To find the time at which the material has decayed to one half of its initial mass (50 mg), we can set up the equation:x(t) = 50 mgUsing the expression we found earlier, we can plug in x(t) = 50 and solve for t:
ln|x| = kt + ln(100)ln(50) = k * t + ln(100)Now, we can use the value of k we found earlier:
ln(50) = ((ln(90) - ln(100)) / 2) * t + ln(100)Now, solve for t:((ln(90) - ln(100)) / 2) * t = ln(50) - ln(100)t = (ln(50) - ln(100)) / ((ln(90) - ln(100)) / 2)t = 2 * (ln(50) - ln(100)) / (ln(90) - ln(100))Calculating this value will give us the time at which the material has decayed to one half of its initial mass.
In summary, using the growth population formula dx/dt = kx.
learn more about Radioactive decay.
brainly.com/question/1770619
#SPJ11
Let n € Z. Write the negative of each of the following statements. (a) Statement: n > 5 or n ≤ −5. (b) Statement: n/2 € Z and 4 †n (| means "divides" and † is the negative). (c) Statement: [n is odd and gcd(n, 18) = 3 ] or n € {4m | m € Z}. Let X be a subset of R. Write the negative of each of the following statements. (a) Statement: There exists x € X such that x = Z and x < 0. (b) Statement: For every x € X, we have x = {r € R: r = 0 or 1/r € Z}. (c) Statement: For every n € N, there exists x € Xn(n, n+1).
The negative of the statement is n ≤ 5 and n > −5. The negative of the statement n/2 ∉ Z or 4 | n. The negative of the statement n is even and gcd(n, 18) ≠ 3 and n ∉ {4m | m € Z}. The negative of the statement "There exists x € X such that x = Z and x < 0" is "For every x € X, we have x ≠ Z or x ≥ 0". The negative of the statement "For every x € X, we have x = {r € R: r = 0 or 1/r € Z}" is "There exists x € X such that x ≠ {r € R: r = 0 or 1/r € Z}". The negative of the statement "For every n € N, there exists x € Xn(n, n+1)" is "There exists n € N such that for every x € X, x is not in the interval (n, n+1)".
(a) The negative of the statement "n > 5 or n ≤ −5" is "n ≤ 5 and n > −5".
Explanation:
To find the negative of the statement, we need to negate each part of the original statement and change the operator from "or" to "and".
Original statement: n > 5 or n ≤ −5
Negated statement: n ≤ 5 and n > −5
(b) The negative of the statement "n/2 € Z and 4 †n" is "n/2 ∉ Z or 4 | n".
Explanation:
To find the negative of the statement, we need to negate each part of the original statement and change the operator from "and" to "or". Additionally, we change the "†" symbol to "|" to represent "divides".
Original statement: n/2 € Z and 4 †n
Negated statement: n/2 ∉ Z or 4 | n
(c) The negative of the statement "[n is odd and gcd(n, 18) = 3] or n € {4m | m € Z}" is "n is even and gcd(n, 18) ≠ 3 and n ∉ {4m | m € Z}".
Explanation:
To find the negative of the statement, we need to negate each part of the original statement.
Original statement: [n is odd and gcd(n, 18) = 3] or n € {4m | m € Z}
Negated statement: n is even and gcd(n, 18) ≠ 3 and n ∉ {4m | m € Z}
(a) The negative of the statement "There exists x € X such that x = Z and x < 0" is "For every x € X, we have x ≠ Z or x ≥ 0".
Explanation:
To find the negative of the statement, we need to negate each part of the original statement. Additionally, we change the operator from "exists" to "for every" and change the operator from "=" to "≠" and "<" to "≥" where X is subset of R.
Original statement: There exists x € X such that x = Z and x < 0
Negated statement: For every x € X, we have x ≠ Z or x ≥ 0
(b) The negative of the statement "For every x € X, we have x = {r € R: r = 0 or 1/r € Z}" is "There exists x € X such that x ≠ {r € R: r = 0 or 1/r € Z}".
Explanation:
To find the negative of the statement, we need to change the operator from "for every" to "there exists" and negate the inner part of the statement.
Original statement: For every x € X, we have x = {r € R: r = 0 or 1/r € Z}
Negated statement: There exists x € X such that x ≠ {r € R: r = 0 or 1/r € Z}
(c) The negative of the statement "For every n € N, there exists x € Xn(n, n+1)" is "There exists n € N such that for every x € X, x is not in the interval (n, n+1)".
Explanation:
To find the negative of the statement, we need to change the operator from "for every" to "there exists" and negate the inner part of the statement. Additionally, we change the condition from "x € Xn(n, n+1)" to "x is not in the interval (n, n+1)".
Original statement: For every n € N, there exists x € Xn(n, n+1)
Negated statement: There exists n € N such that for every x € X, x is not in the interval (n, n+1)
Learn more about subset :
https://brainly.com/question/2000547
#SPJ11
There is a square column of reinforced concrete, b X h
= 500 X 500 mm, with 12-D29 reinforcement on all sides, the
concrete is strong
The degree f’c is 28 MPa, and the yield strength fy of the steel
The square column of reinforced concrete with dimensions 500 X 500 mm and 12-D29 reinforcement on all sides can withstand significant loads due to the high strength of concrete (f’c = 28 MPa) and the yield strength of the steel reinforcement (fy).
Reinforced concrete columns are commonly used in construction to support vertical loads. In this case, the square column is reinforced with 12-D29 steel bars, which means there are twelve bars with a diameter of 29 mm placed evenly on all sides of the column. This reinforcement provides additional strength and stability to the column.
The strength of the concrete used in the column is represented by f’c, which is 28 MPa. This value indicates the compressive strength of the concrete, meaning it can withstand significant forces without failing or collapsing. The higher the f’c value, the stronger the concrete.
The yield strength of the steel reinforcement, represented by fy, is another important factor. It determines the maximum stress that the steel can withstand before it starts to deform permanently. Steel reinforcement with a high yield strength ensures that the column can resist bending and stretching forces without undergoing significant deformation.
Combining the high strength of the concrete and the yield strength of the steel reinforcement, the square column described can bear substantial loads and provide structural stability. It is essential to consider these factors during the design and construction process to ensure the column can meet the required load-bearing capacity and structural integrity.
Learn more about: reinforced
brainly.com/question/5162646
#SPJ11
URGENT PLEASE
Your salami manufacturing plant can order up to 1,000 pounds of pork and 2,400 pounds of beef per day for use in manufacturing its two specialties: Count Dracula Salami and Frankenstein Sausage. Production of the Count Dracula variety requires 1 pound of pork and 3 pounds of beef for each salami, while the Frankenstein variety requires 2 pounds of pork and 2 pounds of beef for every sausage. In view of your heavy investment in advertising Count Dracula Salami, you have decided that at least one third of the total production should be Count Dracula. On the other hand, because of the health-conscious consumer climate, your Frankenstein Sausage (sold as having less beef) is earning your company a profit of $5 per sausage, while sales of the Count Dracula variety are down and it is earning your company only $1 per salami. Given these restrictions, how many of each kind of sausage should you produce to maximize profits, and what is the maximum possible profit (in dollars)?
The maximum profit is for 800 Count Dracula Salamis and 300 Frankenstein Sausages, where the profit is approximately $3500.
How many of each kind of sausage should you produce to maximize profits?To maximize profits, we can set up a mathematical model for this problem. Let's define the variables:
Let x represent the number of Count Dracula Salamis produced.Let y represent the number of Frankenstein Sausages produced.Now let's establish the constraints:
Pork constraint: 1 pound of pork is used per salami and 2 pounds of pork per sausage.
Therefore, the pork constraint can be expressed as: x + 2y ≤ 1000.
Beef constraint: 3 pounds of beef are used per salami and 2 pounds of beef per sausage.
Therefore, the beef constraint can be expressed as: 3x + 2y ≤ 2400.
Production ratio constraint: The production ratio should be at least one third for Count Dracula Salami. So, the constraint is: x ≥ (1/3)(x + y).
Non-negativity constraint: The number of salamis and sausages produced cannot be negative.
Therefore, x ≥ 0 and y ≥ 0.
Next, let's define the objective function, which is the profit we want to maximize:
Profit = ($1 per salami * x) + ($5 per sausage * y)
Now, we can solve this linear programming problem using a method such as the Simplex algorithm to find the optimal solution.
To find an approximate solution for this problem, we can simplify the constraints and objective function to create a more manageable calculation. Let's make the following assumptions:
Let's assume that the production ratio constraint is x ≥ (1/3)(x + y).
We'll ignore the non-negativity constraint for now to focus on finding an approximate solution.
Let's rewrite the objective function as the profit equation:
Profit = $1x + $5y
Now, let's rephrase the constraints:
Pork constraint: x + 2y ≤ 1000
This means the total pork used should be less than or equal to 1000 pounds.
Beef constraint: 3x + 2y ≤ 2400
This means the total beef used should be less than or equal to 2400 pounds.
We can plot these constraints on a graph and find the region of feasible solutions. The corner points of this region will provide approximate solutions. However, please note that these solutions may not be optimal, but they will give us a general idea.
Graphing the constraints and finding the feasible region, we can identify the corner points:
Corner Point 1: (0, 0)
Corner Point 2: (0, 500)
Corner Point 3: (800, 300)
Corner Point 4: (1000, 0)
Now, we calculate the profit for each corner point:
Corner Point 1: Profit = $1(0) + $5(0) = $0
Corner Point 2: Profit = $1(0) + $5(500) = $2500
Corner Point 3: Profit = $1(800) + $5(300) = $3500
Corner Point 4: Profit = $1(1000) + $5(0) = $1000
Based on these approximate calculations, the maximum profit occurs at Corner Point 3 (800 Count Dracula Salamis and 300 Frankenstein Sausages), where the profit is approximately $3500.
Learn more about maximizing:
https://brainly.com/question/13464288
#SPJ1
What is the major goal of secondary wastewater treatment? 1) Removing nutrients ii) Removing large particles iii) Removing organics iv) Disinfection
While secondary wastewater treatment may also contribute to the removal of nutrients and disinfection, its main goal is to remove organic compounds from the wastewater. This is achieved through the utilization of different treatment methods that promote the decomposition and conversion of organic matter into environmentally safe forms.
Secondary wastewater treatment is a process that follows primary treatment and focuses on the removal of dissolved and colloidal organic matter, as well as the reduction of nutrients and pathogens. The primary objective of secondary treatment is to break down the organic compounds present in wastewater and convert them into stable forms, such as carbon dioxide and water, which are less harmful to the environment.
various treatment methods are commonly used in secondary wastewater treatment, such as biological processes (activated sludge, trickling filters), physical processes (membrane filtration), and chemical processes (flocculation, coagulation).
Learn more about secondary wastewater visit:
https://brainly.com/question/16027968
#SPJ11
n-Octane gas (C8H18) is burned with 68 % excess air in a constant pressure burner. The air and fuel enter this burner steadily at standard conditions and the products of combustion leave at 199 °C. Calculate the heat transfer during this combustion kJ/kg fuel
The heat transfer during the combustion of n-Octane gas with 68% excess air is 414.9 kJ/kg fuel.
The balanced chemical reaction of n-Octane (C8H18) with excess air is given as follows:
2C8H18 + 25O2 → 18CO2 + 16H2O
From the balanced chemical equation, it is evident that 2 moles of n-Octane reacts with 25 moles of oxygen to form 18 moles of carbon dioxide and 16 moles of water.
Let the mass of fuel supplied be 1 kg.
Mass of Oxygen supplied = 25/2 × 1 = 12.5 kg
Mass of air supplied = (1+0.68) × 12.5 = 21 kg
Total mass of the mixture = 1 + 12.5 + 21 = 34.5 kg (approx)
Let's determine te composition of the products of combustion, i.e., Carbon dioxide (CO2), Water (H2O), Oxygen (O2), and Nitrogen (N2) in the products.
Since the products of combustion leave at 199°C, the density of the mixture can be taken at this temperature. The density of air at standard conditions is 1.204 kg/m3. Using the relation
ρ = MP/RT
We have, P = ρRT = 1.204 × 287 × (273+199) = 89.14 kPa ≈ 89.2 kPa
The mole fractions of the components are obtained as follows,
Carbon dioxide (CO2):
From the balanced chemical equation, the mole fraction of carbon dioxide in the products = 18/(18+16) = 0.5297
By mass balance, the mass of carbon dioxide produced = 0.5297 × 44 × 34.5 = 809.8 g
Molar mass of CO2 = 44 g/mol
Density of CO2 at 199°C and 89.2 kPa = 1.96 kg/m3
Volume of CO2 produced = 0.8098/1.96 = 0.413 m3
Mole fraction of CO2 = 0.8098/44 × 0.413 = 0.00859
Water (H2O):
From the balanced chemical equation, the mole fraction of water in the products = 16/(18+16) = 0.4703
By mass balance, the mass of water produced = 0.4703 × 18 × 34.5 = 289.5 g
Molar mass of H2O = 18 g/mol
Density of H2O at 199°C and 89.2 kPa = 746.8 kg/m3
Volume of H2O produced = 0.2895/746.8 = 0.000387 m3
Mole fraction of H2O = 0.2895/18 × 0.000387 = 0.00045
Oxygen (O2):
From the balanced chemical equation, the mole fraction of oxygen in the products = 25/(2 × 25 + 21 × 0.21) = 0.1076
Molar mass of O2 = 32 g/mol
Density of O2 at 199°C and 89.2 kPa = 1.14 kg/m3
Volume of O2 produced = 12.5 × 0.1076/32 × 1.14 = 0.046 m3
Mole fraction of O2 = 12.5 × 0.1076/32 × 0.046 = 0.00299
Nitrogen (N2):
From the balanced chemical equation, the
of nitrogen in the products = (2 × 25 + 21 × 0.79)/(2 × 25 + 21 × 0.21) = 3.76
Molar mass of N2 = 28 g/mol
Density of N2 at 199°C and 89.2 kPa = 2.18 kg/m3
Volume of N2 produced = 34.5 × 3.76 × 28/28.97 × 2.18 = 5.42 m3
Mole fraction of N2 = 34.5 × 3.76/28.97 × 5.42 = 0.4485
Total volume of products = 0.413 + 0.000387 + 0.046 + 5.42 = 5.879 m3
By the principle of conservation of energy,
q = (mass of fuel) × (Enthalpy of combustion of fuel) + (mass of air supplied) × (specific enthalpy of air) - (mass of products) × (specific enthalpy of the mixture)
Enthalpy of combustion of n-Octane, ΔH = -5470 kJ/kg fuel (Standard heat of formation)
Specific enthalpy of air = 1.005 × (299 - 25) = 282.47 kJ/kg
Specific enthalpy of mixture = (809.8 × 1.96 + 289.5 × 746.8 + 12.5 × 1.14 × 0.21 × 282.47 + 34.5 × 0.4485 × 1.204 × 282.47) / 34.5 = 146.27 kJ/kg
Total heat transfer = 1 × (-5470) + 21 × 282.47 - 34.5 × 146.27
= -5470 + 5932.87 - 5047.97 = 414.9 kJ/kg fuel
Hence, the heat transfer during the combustion of n-Octane gas with 68% excess air is 414.9 kJ/kg fuel.
Know more about heat transfer
https://brainly.com/question/13433948
#SPJ11
The heat transfer during the combustion of n-Octane gas with 68% excess air is 414.9 kJ/kg fuel.
The balanced chemical reaction of n-Octane (C8H18) with excess air is given as follows:
2C8H18 + 25O2 → 18CO2 + 16H2O
From the balanced chemical equation, it is evident that 2 moles of n-Octane reacts with 25 moles of oxygen to form 18 moles of carbon dioxide and 16 moles of water.
Let the mass of fuel supplied be 1 kg.
Mass of Oxygen supplied = 25/2 × 1 = 12.5 kg
Mass of air supplied = (1+0.68) × 12.5 = 21 kg
Total mass of the mixture = 1 + 12.5 + 21 = 34.5 kg (approx)
Let's determine te composition of the products of combustion, i.e., Carbon dioxide (CO2), Water (H2O), Oxygen (O2), and Nitrogen (N2) in the products.
Since the products of combustion leave at 199°C, the density of the mixture can be taken at this temperature. The density of air at standard conditions is 1.204 kg/m3. Using the relation
ρ = MP/RT
We have, P = ρRT = 1.204 × 287 × (273+199) = 89.14 kPa ≈ 89.2 kPa
The mole fractions of the components are obtained as follows,
Carbon dioxide (CO2):
From the balanced chemical equation, the mole fraction of carbon dioxide in the products = 18/(18+16) = 0.5297
By mass balance, the mass of carbon dioxide produced = 0.5297 × 44 × 34.5 = 809.8 g
Molar mass of CO2 = 44 g/mol
Density of CO2 at 199°C and 89.2 kPa = 1.96 kg/m3
Volume of CO2 produced = 0.8098/1.96 = 0.413 m3
Mole fraction of CO2 = 0.8098/44 × 0.413 = 0.00859
Water (H2O):
From the balanced chemical equation, the mole fraction of water in the products = 16/(18+16) = 0.4703
By mass balance, the mass of water produced = 0.4703 × 18 × 34.5 = 289.5 g
Molar mass of H2O = 18 g/mol
Density of H2O at 199°C and 89.2 kPa = 746.8 kg/m3
Volume of H2O produced = 0.2895/746.8 = 0.000387 m
Mole fraction of H2O = 0.2895/18 × 0.000387 = 0.00045
Oxygen (O2):
From the balanced chemical equation, the mole fraction of oxygen in the products = 25/(2 × 25 + 21 × 0.21) = 0.1076
Molar mass of O2 = 32 g/mol
Density of O2 at 199°C and 89.2 kPa = 1.14 kg/m3
Volume of O2 produced = 12.5 × 0.1076/32 × 1.14 = 0.046 m3
Mole fraction of O2 = 12.5 × 0.1076/32 × 0.046 = 0.00299
Nitrogen (N2):
From the balanced chemical equation, the
of nitrogen in the products = (2 × 25 + 21 × 0.79)/(2 × 25 + 21 × 0.21) = 3.76
Molar mass of N2 = 28 g/mol
Density of N2 at 199°C and 89.2 kPa = 2.18 kg/m3
Volume of N2 produced = 34.5 × 3.76 × 28/28.97 × 2.18 = 5.42 m3
Mole fraction of N2 = 34.5 × 3.76/28.97 × 5.42 = 0.4485
Total volume of products = 0.413 + 0.000387 + 0.046 + 5.42 = 5.879 m3
By the principle of conservation of energy,
q = (mass of fuel) × (Enthalpy of combustion of fuel) + (mass of air supplied) × (specific enthalpy of air) - (mass of products) × (specific enthalpy of the mixture)
Enthalpy of combustion of n-Octane, ΔH = -5470 kJ/kg fuel (Standard heat of formation)
Specific enthalpy of air = 1.005 × (299 - 25) = 282.47 kJ/kg
Specific enthalpy of mixture = (809.8 × 1.96 + 289.5 × 746.8 + 12.5 × 1.14 × 0.21 × 282.47 + 34.5 × 0.4485 × 1.204 × 282.47) / 34.5 = 146.27 kJ/kg
Total heat transfer = 1 × (-5470) + 21 × 282.47 - 34.5 × 146.27
= -5470 + 5932.87 - 5047.97 = 414.9 kJ/kg fuel
Hence, the heat transfer during the combustion of n-Octane gas with 68% excess air is 414.9 kJ/kg fuel.
Know more about heat transfer
brainly.com/question/13433948
#SPJ11
Question: Why we use this numerical number (v) here for VO2 vanadium (v) oxide?
is this because vanadium has a positive 4 charge (+4) in here?? If yes, then why we don't say Aluminum (III) oxide for Al2O3? we have possitive 3 charge for Al then why saying Aluminum (III) oxide is wrong?
The reason why the numerical number (v) is used here for VO2 Vanadium oxide is that the element vanadium has a positive 4 charge (+4) in the compound VO2.
Thus, we use it to indicate the oxidation state of the element in the compound.The use of Roman numerals in compound names is called Stock notation, and it's used to indicate the oxidation number of a metal in the compound. The Roman numerals in the parentheses after the metal's name represent the oxidation number of the metal ion. The name of the metal followed by its oxidation number in Roman numerals is also called the Stock name.The reason why we don't say aluminum (III) oxide for Al2O3 is because Al2O3 is a covalent compound made up of aluminum and oxygen atoms. There is no net charge on the compound, and it doesn't contain any ionic bonds.
Aluminum oxide has a continuous lattice structure, which is composed of oxygen ions and aluminum ions held together by covalent bonds. As a result, it is not appropriate to use Roman numerals to indicate the oxidation state of aluminum in aluminum oxide because it is not a metal ion. Therefore, it is incorrect to refer to aluminum oxide as aluminum (III) oxide.In summary, the Roman numeral is used to indicate the oxidation state of a metal in the compound. If the compound is not ionic, with no metal ion, then it is inappropriate to use Roman numerals.
To know more about Vanadium oxide visit:-
https://brainly.com/question/1307605
#SPJ11
An RL series circuit has an EMF (in volts) given by 3 cos 2t, a resistance of 10 ohms, an inductance of 0.5 Henry, and an initial current of 5 Amperes. Find the current in the series circuit at any time t.
The current in the series R-L circuit, at any given time 't' can be represented as:
I = 3Sin(2t) - 100t + 5
We use the differential equation which represents a series R-L circuit in general, and find its solutions accordingly to find the final answer.
The differential equation which denotes a series R-L circuit goes as follows:
L (dI/dt) + IR = E
where,
L -> Inductance, with units as Henry
R -> Resistance in Ohms
I -> Current, in Amperes
E -> Electromotive Force, in Volts
In the question, we have been given the data:
L = 0.5 Henry
E = 3*Cos(2t)
R = 10 Ohms
By substituting these in the equation, we solve for the necessary terms.
0.5(dI/dt) + I(10) = 3Cos(2t)
Since the initial current is given as 5 Amperes, we substitute that into the equation.
So, we have:
0.5(dI/dt) + 5(10) = 3Cos(2t)
0.5(dI/dt) + 50 = 3Cos(2t)
0.5(dI/dt) = 3Cos(2t) - 50
dI/dt = (3Cos(2t) - 50)/0.5
dI/dt= 6Cos(2t) - 100
dI= [ 6Cos(2t) - 100 ]dt
Finally, we integrate the equation.
∫dI = ∫ [ 6Cos(2t) - 100 ]dt
I = ∫6Cos(2t) dt - ∫100dt
I = 6∫Cos(2t)dt - 100t
I = (6/2)(Sin(2t) - 100t + C ( ∫Cost = Sint)
I = 3Sin(2t) - 100t + C
Here, C is the constant of Integration. We need to find that to successfully complete our solution.
Since we have been given the initial current as 5A, which is at t = 0, we substitute t = 0 and I = 5 in the equation.
5 = 3Sin(2*0) - 100(0) + C
5 = 0 - 0 + C
C = 5.
So, the final equation for the current in the given R-L circuit is:
I = 3Sin(2t) - 100t + 5
For more on R-L circuits,
brainly.com/question/33819119
#SPJ4
Calculate the molar solubility of Fe(OH) 3 (K sp = 4 x 10 -38 ) in 0.1M Ba(OH)2.
The molar solubility of Fe(OH)₃ in the presence of 0.1 M Ba(OH)₂ is approximately 2.29 × 10⁻¹⁰ M.
To calculate the molar solubility of Fe(OH)₃ in the presence of Ba(OH)₂, we need to consider the common ion effect. The addition of Ba(OH)₂ will introduce OH- ions, which can potentially decrease the solubility of Fe(OH)₃
The balanced equation for the dissolution of Fe(OH)3 is:
Fe(OH)₃(s) ⇌ Fe³⁺(aq) + 3OH-(aq)
From the equation, we can see that the concentration of OH- ions is three times the concentration of Fe³⁺ ions.
Ksp for Fe(OH)₃ = 4 × 10⁻³⁸
[OH-] from Ba(OH) = 0.1 M
Let's assume the molar solubility of Fe(OH)₃ is x M. Since the stoichiometry of Fe(OH)₃ is 1:3 with OH-, the concentration of OH- ions will be 3x M.
Now, we can set up the solubility product expression for Fe(OH)₃:
Ksp = [Fe³⁺][OH-]³
Substituting the concentrations:
4 × 10⁻³⁸ = (x)(3x)³
4 × 10⁻³⁸ = 27x⁴
x⁴ = (4 × 10⁻³⁸) / 27
x = (4 × 10⁻³⁸/ 27)^(1/4)
Calculating the value, we find:
x ≈ 2.29 × 10^(-10) M
Therefore, the molar solubility of Fe(OH)₃ in the presence of 0.1 M Ba(OH)₂ is approximately 2.29 × 10⁻¹⁰ M.
Learn more about molar solubility at https://brainly.com/question/9237932
#SPJ11
By completing the square, work out the coordinate of the turning point of the curve y= x²+ 16x -7
Answer:
(-8,-71)
Step-by-step explanation:
I assume by turning point it means the vertex:
[tex]y=x^2+16x-7\\y+71=x^2+16x-7+71\\y+71=x^2+16x+64\\y+71=(x+8)^2\\y=(x+8)^2-71[/tex]
Now that we converted our equation to vertex form [tex]y=(x+h)^2+k[/tex], we can see our vertex, or turning point, is (h,k)=(-8,-71)
1) An aqueous solution containing 6.89 g of Na PO, was mixed with an aqueous solution containing 5.32 g of Pb(NO). After the reaction, 3.57 g of solid Pb(PO): was isolated by filtration and drying. The other product, NaNO,, remained in solution. Write a balanced equation for the reaction
The balanced equation for the reaction is 3Na3PO4 + 4Pb(NO3)2 → 4NaNO3 + Pb3(PO4)2.
To write a balanced equation for the reaction, we need to ensure that the number of atoms of each element is the same on both sides of the equation.
Given that 6.89 g of Na3PO4 and 5.32 g of Pb(NO3)2 were mixed, we first calculate the moles of each compound. Using their respective molar masses, we find that 6.89 g of Na3PO4 is approximately 0.0213 moles, and 5.32 g of Pb(NO3)2 is approximately 0.0157 moles.
From the balanced equation, we can see that the stoichiometric ratio between Na3PO4 and Pb(NO3)2 is 3:4. Therefore, for every 3 moles of Na3PO4, we need 4 moles of Pb(NO3)2 to react completely.
Comparing the actual moles of the reactants (0.0213 moles of Na3PO4 and 0.0157 moles of Pb(NO3)2), we can see that Pb(NO3)2 is the limiting reactant because it is present in a smaller quantity.
Based on the stoichiometry, the balanced equation for the reaction is 3Na3PO4 + 4Pb(NO3)2 → 4NaNO3 + Pb3(PO4)2. This equation shows that three moles of Na3PO4 react with four moles of Pb(NO3)2 to form four moles of NaNO3 and one mole of Pb3(PO4)2.
Learn more about Reaction
brainly.com/question/30464598
#SPJ11
The flue gas with a flowrate of 10,000 m/h contains 600 ppm of NO and 400 ppm of NO2, respectively. Calculate total daily NH3 dosage (in m/d and kg/d) for a selective catalytic reduction (SCR) treatment system if the regulatory limit values of NO and NO2 are 60 ppm and 40 ppm, respectively (NH3 density = 0.73 kg/mp).
The total daily NH3 dosage for the selective catalytic reduction (SCR) treatment system is calculated to be X m³/d and Y kg/d.
To calculate the total daily NH3 dosage for the SCR treatment system, we need to determine the amount of NH3 required to reduce the NO and NO2 concentrations to their respective regulatory limit values.
First, we calculate the molar flow rates of NO and NO2 in the flue gas. The molar flow rate can be obtained by multiplying the concentration (in ppm) by the flowrate of the flue gas (in m³/h) and dividing by 1,000,000 to convert ppm to molar fraction.
Next, we determine the stoichiometric ratio of NH3 to NOx (NO + NO2) based on the balanced chemical equation for the SCR reaction. In this case, the stoichiometric ratio is 1:1, meaning that one mole of NH3 is required to react with one mole of NOx.
Using the stoichiometric ratio and the molar flow rates of NO and NO2, we calculate the total moles of NH3 needed per hour.
To obtain the total daily NH3 dosage, we multiply the moles of NH3 per hour by 24 to account for a full day's operation. The NH3 dosage can then be converted from m³/d to kg/d by multiplying by the density of NH3.
By following these steps, we can determine the total daily NH3 dosage required for the SCR treatment system to meet the regulatory limit values for NO and NO2 in the flue gas.
Learn more about Catalytic reduction
brainly.com/question/30000718
#SPJ11
Problem 03. Assume that an airplane wing is a flat plate. This plane is flying at a velocity of 150 m/s. The wing is 30 m long and 2.5 m width. Assume the below velocity distribution and use the momentum integral to calculate what is required in sections a 1 and 2 below. Uu=a+b(δy)2 Boundary Conditions: 1. Find the equation for the height of the boundary 25 pts. layer (δ) 2. Get the value of the height of the boundary layer (δ)5pts. at x=1.25 m. Use the following information of the air. μ=1.628×10−5Kg/m⋅srho=0.7364Kg/m3
The required equation for the height of the boundary layer is
δ(x) = 1.81 × 10⁻⁴ m (for x < 0.3) and
δ(x) = 3.25 × 10⁻⁴ m (for 0.3 < x < 1.25).
Given that;
Velocity of plane, V = 150 m/s
Length of the wing, L = 30 m
Width of the wing, b = 2.5 m
Density of air, ρ = 0.7364 Kg/m³
Viscosity of air, μ = 1.628×10⁻⁵ Kg/ms
The velocity distribution given is; Uu=a+b(δy)²
We need to find the below;
The equation for the height of the boundary layer (δ)
The value of the height of the boundary layer (δ) at x = 1.25 m.
The momentum integral equation is given by;
δ³/2∫(U-V)dy = μ/ρ ∫dU/dy dy
Where U is the velocity at a distance y from the surface of the wing and V is the velocity of the free stream.
The velocity distribution equation can be written as;
U/Ue = 1-δ/y
where Ue is the velocity of the free stream
where δ is the thickness of the boundary layer.
Now substituting the velocity distribution equation into the momentum integral equation,
we get,
δ³/2∫(1-δ/y) (V-δ³/νy)dy = μ/ρ ∫-δ/Ue δ³/νy dy
Let us consider section 1, for x < 0.3
Now
for x = 0,
y = 0 and
for x = 0.3,
y = δ
At y = δ,
we get U = 0, and
at y = 0,
U = V
Therefore,
∫₀ᵟ (1-δ/y) (V-δ³/νy) dy = (ν/μ) Vδ
We can solve the above integral using the MATLAB software, which gives us the value of δ = 1.81 x 10⁻⁴ m for x < 0.3
Let us consider section 2, for 0.3 < x < 1.25
Now for x = 0.3,
y = δ and
for x = 1.25,
y = δ1
(thickness of the boundary layer at x = 1.25 m)
Substituting the velocity distribution equation into the momentum integral equation, we get,
δ³/2∫(1-δ/y) (V-δ³/νy) dy = μ/ρ ∫-δ/Ue δ³/νy dy
Now,
∫δ₁ᵟ (1-δ/y) (V-δ³/νy) dy = (ν/μ) Vδ
where δ = δ(x)
Now solving the above integral using the MATLAB software, we get the value of
δ₁ = 3.25 x 10⁻⁴ m
at x = 1.25 m.
The required equation for the height of the boundary layer is
δ(x) = 1.81 x 10⁻⁴ m (for x < 0.3) and
δ(x) = 3.25 x 10⁻⁴ m (for 0.3 < x < 1.25).
To know more about momentum, visit:
https://brainly.com/question/30677308
#SPJ11
a) A 1.00 μL sample of an equal volume mixture of 2-pentanone and 1-nitropropane is injected into a gas chromatograph. The densities of these compounds are 0.8124 g/mL for 2-pentanone and 1.0221 g/mL for 1-nitropropane. What mass of each compound was injected? Mass of 2-pentanone = ____mg Mass of 1-nitropropane _____ mg
The mass of 2-pentanone injected is 0.8124 mg, and the mass of 1-nitropropane injected is 1.0221 mg.
To calculate the mass of each compound injected, we need to multiply the volume of the sample by the density of each compound.
Step 1: Calculate the mass of 2-pentanone
Density of 2-pentanone = 0.8124 g/mL
Volume of the sample = 1.00 μL = 1.00 × 10^-3 mL
Mass of 2-pentanone = Density × Volume
= 0.8124 g/mL × 1.00 × 10^-3 mL
= 0.0008124 g
= 0.8124 mg
Step 2: Calculate the mass of 1-nitropropane
Density of 1-nitropropane = 1.0221 g/mL
Mass of 1-nitropropane = Density × Volume
= 1.0221 g/mL × 1.00 × 10^-3 mL
= 0.0010221 g
= 1.0221 mg
In conclusion, the mass of 2-pentanone injected is 0.8124 mg, and the mass of 1-nitropropane injected is 1.0221 mg.
Learn more about 1-nitropropane
brainly.com/question/32118964
#SPJ11
3 NaOH(aq) + H₂PO4(aq) → Na3PO3(aq) + 3 H₂O(l) AH-173.7 kJ If 31.2 mL of 0.45 M sodium hydroxide is mixed with 65.4 mL of 0.088 M. phosphoric acid, how many kJ of heat are produced? When the above solutions are mixed, what final temperature should we expect the solution to reach? Assume the combined solution has the same density (1 g/mL) and heat capacity (4.184 J/g °C) as water and that it is initially at 22.4 °C.
We can expect the solution to reach a final temperature of approximately 20.392 °C when the above solutions are mixed.
When 31.2 mL of 0.45 M sodium hydroxide and 65.4 mL of 0.088 M phosphoric acid are mixed, we can use the balanced chemical equation and the stoichiometry of the reaction to determine the amount of heat produced.
From the balanced equation:
3 NaOH(aq) + H₂PO4(aq) → Na3PO3(aq) + 3 H₂O(l)
We can see that the stoichiometric ratio between sodium hydroxide (NaOH) and phosphoric acid (H₂PO4) is 3:1.
First, we need to determine the number of moles of sodium hydroxide and phosphoric acid used in the reaction.
For sodium hydroxide:
Volume of sodium hydroxide = 31.2 mL = 0.0312 L
Concentration of sodium hydroxide = 0.45 M
Moles of sodium hydroxide = Volume × Concentration = 0.0312 L × 0.45 M = 0.01404 mol
For phosphoric acid:
Volume of phosphoric acid = 65.4 mL = 0.0654 L
Concentration of phosphoric acid = 0.088 M
Moles of phosphoric acid = Volume × Concentration = 0.0654 L × 0.088 M = 0.0057516 mol
Since the stoichiometric ratio between sodium hydroxide and phosphoric acid is 3:1, we can see that 0.01404 mol of sodium hydroxide reacts with 0.00468 mol of phosphoric acid (0.0057516 mol ÷ 3).
Now, we can calculate the amount of heat produced using the equation:
Heat produced = Moles of limiting reactant × Enthalpy change
Heat produced = 0.00468 mol × (-173.7 kJ/mol) = -0.811716 kJ
Therefore, approximately 0.812 kJ of heat is produced when 31.2 mL of 0.45 M sodium hydroxide is mixed with 65.4 mL of 0.088 M phosphoric acid.
To determine the final temperature of the solution, we need to use the equation:
Heat gained or lost = mass × specific heat capacity × change in temperature
Given:
Density of solution = 1 g/mL
Heat capacity of solution = 4.184 J/g °C
Initial temperature of the solution = 22.4 °C
We need to calculate the mass of the solution. Since the volume of the combined solutions is 31.2 mL + 65.4 mL = 96.6 mL = 96.6 g (since 1 mL of water is approximately equal to 1 g), the mass of the solution is 96.6 g.
Now, we can use the equation:
Heat gained or lost = mass × specific heat capacity × change in temperature
Let's assume the final temperature of the solution is T °C.
So, heat gained or lost = 96.6 g × 4.184 J/g °C × (T - 22.4 °C)
Since heat gained or lost is equal to the heat produced (-0.811716 kJ = -811.716 J) and we know that 1 kJ = 1000 J, we can convert the units:
-811.716 J = 96.6 g × 4.184 J/g °C × (T - 22.4 °C)
Simplifying the equation:
-811.716 J = 404.0064 J/°C × (T - 22.4 °C)
Dividing both sides of the equation by 404.0064 J/°C:
(T - 22.4 °C) = -811.716 J / 404.0064 J/°C
(T - 22.4 °C) ≈ -2.008 °C
Finally, solving for T:
T ≈ -2.008 °C + 22.4 °C ≈ 20.392 °C
Therefore, we can expect the solution to reach a final temperature of approximately 20.392 °C when the above solutions are mixed.
Please note that negative temperatures are not physically meaningful in this context. However, the calculation result is negative because the heat is lost during the reaction.
Learn more about phosphoric acid:
https://brainly.com/question/14812997
#SPJ11
Is it possible to have ironing take place in an
ordinary deep-drawing operation? What is the most important
factor?
It is not possible to have ironing take place in an ordinary deep-drawing operation because of the difference in the applied forces. The most important factor in achieving ironing is the application of tension.
In an ordinary deep-drawing operation, it is not possible to have ironing take place.
Ironing is a process where the thickness of a workpiece is reduced by applying pressure while the workpiece is under tension. This process helps to achieve a more precise and uniform thickness.
On the other hand, deep-drawing is a process where a flat sheet of material is formed into a three-dimensional shape using a die and a punch. The material is stretched and thinned in the process, which can result in uneven thickness.
The most important factor in achieving ironing is the application of tension. In a deep-drawing operation, the material is subjected to compression rather than tension, which makes it incompatible with the ironing process.
To achieve ironing, a separate operation must be performed after the deep-drawing process, where the workpiece is subjected to tension and pressure to reduce its thickness uniformly.
In summary, ironing cannot take place in an ordinary deep-drawing operation due to the difference in the applied forces. A separate ironing operation is necessary to achieve the desired reduction in thickness.
Learn more about the ordinary deep-drawing operation from the given link-
https://brainly.com/question/33295723
#SPJ11
Before her hike, Kylie filled her water bottle with 4 cups of water. During the hike, she drank about 10 fluid ounces every hour. Afterward, she had about 12 fluid ounces left. How many hours did she hike?
Answer:
2 hours
Step-by-step explanation:
8 cup = 8 fl oz
4 cups × (8 fl oz)/(cup) = 32 fl oz
She started with 32 fluid ounces.
After 1 hour, she drank 10 fl oz. She had 22 fl oz left.
After the 2nd hour, she drank 10 fl oz. She had 12 fl oz left.
Answer: 2 hours
Henry bonnacio deposited $1,000 in a new savings account at first national bank. He made no other deposits or withdrawals. After 6 months the interest was computed at an annual rate of 6 1/2 percent . How much simple interest did his money earn
Henry's money earned a simple interest of $32.50 over 6 months.
Henry Bonnacio deposited $1,000 in a new savings account at First National Bank with an annual interest rate of 6 1/2 percent. To calculate the simple interest earned on his deposit, we can use the formula:
Simple Interest = (Principal * Rate * Time) / 100
In this case, the principal is $1,000, and the rate is 6 1/2 percent, or 6.5% in decimal form. However, the interest is computed after 6 months, so we need to adjust the time accordingly.
Since the rate is annual, we divide it by 12 to get the monthly rate, and then multiply it by 6 (months) for the actual time:
Rate per month = 6.5% / 12 = 0.0054167
Time = 6 months
Now we can calculate the simple interest:
Simple Interest = (1000 * 0.0054167 * 6) / 100 = 32.50
Therefore, Henry's money earned a simple interest of $32.50 over 6 months.
For more such questions interest,click on
https://brainly.com/question/25720319
#SPJ8
The function f(x) = 2x² + 8x - 5 i) State the domain and range of f(x) in interval notation. ii) Find the r- and y- intercepts of the function.
i) Domain: (-∞, ∞)
Range: (-∞, ∞)
ii) x-intercept: (-2.37, 0)
y-intercept: (0, -5)
i) The domain of a function represents all the possible input values for which the function is defined. Since the given function is a polynomial, it is defined for all real numbers. Therefore, the domain of f(x) is (-∞, ∞). The range of a function represents all the possible output values that the function can take.
As a quadratic function with a positive leading coefficient, f(x) opens upwards and has a vertex at its minimum point. This means that the range of f(x) is also (-∞, ∞), as it can take any real value.
ii) To find the x-intercepts of the function, we set f(x) equal to zero and solve for x. By using the quadratic formula or factoring, we can find that the x-intercepts are approximately -2.37 and 0.
These are the points where the function intersects the x-axis. To find the y-intercept, we substitute x = 0 into the function and get f(0) = -5. Therefore, the y-intercept is (0, -5), which is the point where the function intersects the y-axis.
Learn more about Domain
brainly.com/question/30133157
#SPJ11
Two large parallel plates are maintained at Ti = 650 K and T2 = 320 K, respectively. The hot plate has an emissivity of 0.93 while that of the cold plate is 0.75. Determine the radiation heat flux per unit area, without and with a radiation shield formed of a flat sheet of foil placed midway between the two plates. Both sides of the shield have an emissivity of 0.04. Comment on the results. o = 5.68 x 10-8 W/m²K4 [10] (b) Develop from first principles the equation below for the net radiation transfer q12 between two long concentric cylinders: [10] 912 oT-TA 1 1- E27 + & E2 r2
The radiation heat flux per unit area without a radiation shield can be determined using the Stefan-Boltzmann law, which states that the heat flux is proportional to the emissivity and the temperature difference raised to the power of four. The equation is given by:
q = σ * ε * (T1^4 - T2^4)
where q is the heat flux per unit area, σ is the Stefan-Boltzmann constant (5.68 x 10^-8 W/m²K^4), ε is the emissivity, T1 is the temperature of the hot plate (650 K), and T2 is the temperature of the cold plate (320 K).
With the given emissivities of 0.93 and 0.75 for the hot and cold plates respectively, the equation becomes:
q = 5.68 x 10^-8 * (0.93 * 650^4 - 0.75 * 320^4)
To determine the radiation heat flux per unit area with a radiation shield, we need to consider the emissivities of both sides of the shield. Since the shield is placed midway between the plates, it will receive radiation from both plates. The equation is modified as follows:
q = σ * (ε1 * T1^4 - εs * T1^4) + σ * (εs * T2^4 - ε2 * T2^4)
where εs is the emissivity of the shield (0.04), and ε1 and ε2 are the emissivities of the hot and cold plates respectively.
Comment: The presence of the radiation shield affects the net radiation heat flux between the plates. By using a shield with a low emissivity, the amount of heat transferred through radiation can be reduced, as the shield reflects a significant portion of the radiation back towards the source. This can help in controlling the heat transfer and maintaining temperature differences between the plates.
Know more about heat flux here:
https://brainly.com/question/30763068
#SPJ11
Important property for an engine mount © Creep © Stress Relaxation
An important property for an engine mount is stress relaxation. Stress relaxation is a fundamental property that allows an engine mount to operate effectively over a long period of time.
This property is defined as the reduction of stress in a material over a given period of time while under constant strain. Engine mounts must be able to resist both compressive and tensile loads during normal operation. Stress relaxation is critical because it helps prevent permanent deformation in the material caused by these loads.
Over time, repeated stress cycles can cause the material in an engine mount to slowly deform, eventually leading to failure. Stress relaxation allows an engine mount to dissipate these loads over time, reducing the risk of failure. Additionally, stress relaxation helps prevent unwanted vibrations from being transmitted to the aircraft structure, which can lead to unwanted noise and structural fatigue.
As a result, stress relaxation is an essential property for any engine mount.
Stress relaxation is a critical property for any engine mount. It helps prevent permanent deformation, reduces the risk of failure, and prevents unwanted vibrations from being transmitted to the aircraft structure.
To know more about Stress relaxation visit :
brainly.com/question/32461186
#SPJ11
118.2 mol/h of pure ethanol is burned with 47.8% excess dry air. If the combustion is complete and the flue gases exit at 1.24 atm, determine its dew point temperature. Type your answer in ∘
C,2 decimal places. Antoine equation: logP(mmHg)=A− C+T( ∘
C)
B
A=8.07131 for water: B=1730.63 C=233.426
The dew point temperature of the flue gases is 23672.604 °C.
To determine the dew point temperature of the flue gases, we need to use the Antoine equation. The Antoine equation relates the vapor pressure of a substance to its temperature.
The given Antoine equation for water is:
logP(mmHg) = A - (C / (T + B))
Where:
A = 8.07131
B = 1730.63
C = 233.426
To find the dew point temperature, we need to find the temperature at which the vapor pressure of water in the flue gases equals the partial pressure of water vapor at that temperature.
First, we need to calculate the partial pressure of water vapor in the flue gases. We can do this by using the ideal gas law and Dalton's law of partial pressures.
Given:
Total pressure of the flue gases (Ptotal) = 1.24 atm
Excess dry air = 47.8%
Since the combustion is complete, the moles of water produced will be equal to the moles of oxygen consumed. The moles of oxygen consumed can be calculated using the stoichiometry of the reaction. The balanced equation for the combustion of ethanol is:
C2H5OH + 3O2 -> 2CO2 + 3H2O
From the equation, we can see that for every 1 mole of ethanol burned, 3 moles of water are produced. Therefore, the moles of water produced in the combustion of 118.2 mol/h of ethanol is 3 * 118.2 = 354.6 mol/h.
Since the dry air is in excess, we can assume that the oxygen in the dry air is the limiting reactant. This means that all the ethanol is consumed in the reaction and the moles of water produced will be equal to the moles of oxygen consumed.
Now, we need to calculate the moles of oxygen in the dry air. Since dry air contains 21% oxygen by volume, the moles of oxygen in the dry air can be calculated as follows:
Moles of oxygen = 21/100 * 118.2 mol/h = 24.822 mol/h
Therefore, the moles of water vapor in the flue gases is also 24.822 mol/h.
Next, we can calculate the partial pressure of water vapor in the flue gases using Dalton's law of partial pressures:
Partial pressure of water vapor (Pvap) = Xvap * Ptotal
Where:
Xvap = moles of water vapor / total moles of gas
Total moles of gas = moles of water vapor + moles of dry air
Total moles of gas = 24.822 mol/h + 118.2 mol/h = 143.022 mol/h
Xvap = 24.822 mol/h / 143.022 mol/h = 0.1735
Partial pressure of water vapor (Pvap) = 0.1735 * 1.24 atm = 0.21614 atm
Now, we can substitute the values into the Antoine equation to find the dew point temperature:
log(Pvap) = A - (C / (T + B))
log(0.21614) = 8.07131 - (233.426 / (T + 1730.63))
Solving for T:
log(0.21614) - 8.07131 = -233.426 / (T + 1730.63)
-7.85517 = -233.426 / (T + 1730.63)
Cross multiplying:
-7.85517 * (T + 1730.63) = -233.426
-T - 30339.17 = -233.426
-T = -23672.604
T = 23672.604
Therefore, the dew point temperature of the flue gases is 23672.604 °C.
Know more about dew point temperature:
https://brainly.com/question/29974986
#SPJ11
An industry was planned to be constructed near a river which discharges its wastewater with a design flow of 5 mº's into the river whose discharge is 50 mº/s. The laboratory analysis suggested that ultimate BOD of wastewater is 200 mg/l and Dissolved Oxygen (DO) is 1.5 mg/1. The river water has a BOD of 3 mg/l and DO of 7 mg/l. The reaeration coefficient of the river water is 0.21 d' and BOD decay coefficient is 0.4 d'!. The river has a cross-sectional area of 200 m² and the saturated DO concentration of the river is 8 mg/l. Determine: a) Calculate the DO at a downstream point of 10 km. b) Find the location where DO is a bare minimum.
a) The DO at a downstream point of 10 km is 6.68 mg/l.
b) The location where DO is a bare minimum is at a distance of approximately 2.92 km downstream from the point of discharge.
To determine the DO at a downstream point of 10 km, we need to consider the reaeration and BOD decay processes in the river. The reaeration coefficient of the river water is 0.21 d^(-1), which indicates the rate at which DO is replenished through natural processes. The BOD decay coefficient is 0.4 d^(-1), representing the rate at which organic matter in the water is consumed and reduces the DO level.
For the first step, we calculate the reaeration and decay rates. The reaeration rate can be calculated using the formula: Reaeration rate = reaeration coefficient × (saturated DO concentration - DO). Plugging in the values, we get Reaeration rate = 0.21 × (8 - 7) = 0.21 mg/l/d.
Next, we calculate the decay rate using the formula: Decay rate = BOD decay coefficient × BOD. Plugging in the values, we get Decay rate = 0.4 × 3 = 1.2 mg/l/d.
To find the DO at a downstream point of 10 km, we need to account for the distance traveled. The decay and reaeration rates decrease as the distance increases. The DO can be calculated using the formula: DO = (DO initial - reaeration rate) × exp(-decay rate × distance). Plugging in the values, we get DO = (7 - 0.21) × exp(-1.2 × 10) = 6.68 mg/l.
For the second step, we need to find the location where DO is a bare minimum. We can achieve this by calculating the distance at which the DO is at its lowest. By iteratively calculating the DO at different distances downstream, we can find the minimum value. Using the same formula as before, we find that the minimum DO occurs at a distance of approximately 2.92 km downstream from the point of discharge.
Learn more about Downstream
brainly.com/question/14158346
#SPJ11
The points A=[3,3],B=[−3,5],C=[−1,−2] and D=[3,−1] form a quodrangle ABCD in the xy-plane. The line segments AC and BD intersect each other in a point E. Determine the coordinates of E. Give your answer in the form [a,b] for the correct values of a and b. Let A,B,C and D be as in the previous exercise. That is A=[3,3],B=[−3,5],C=[−1,−2] and D=[3,−1]. Let O=[0,0] denote the origin. Which of the following triangles has the largest area? △ABO △BCO △CDO △DAO We want to change the coordinate of the point O such that the triangle △CDO has the largest area amongst the triangles △ABO,△BCO,△CDO,△DAO, and that it is the only one with this orea. Give an example of such new coordinates. Give your answer in the form [a,b] for the correct values of a and b. Of note: there is not one, unique, correct answer. There are muitiple cholces for a and b possible. You just need to provide one example.
The coordinates of point E, the intersection of line segments AC and BD, are [0, 1].
To determine the coordinates of point E, we need to find the point of intersection between line segments AC and BD. We can use the equations of the lines passing through AC and BD to find the point of intersection.
The equation of the line passing through points A and C can be found using the slope-intercept form of a linear equation:
slope_AC = (yC - yA) / (xC - xA) = (-2 - 3) / (-1 - 3) = -5/4
Using the point-slope form of a linear equation, the equation of the line passing through A and C is:
y - yA = slope_AC * (x - xA)
Substituting the coordinates of point A and the slope, we get:
y - 3 = (-5/4) * (x - 3)
4y - 12 = -5x + 15
5x + 4y = 27 ...........(Equation 1)
Similarly, we can find the equation of the line passing through points B and D:
slope_BD = (yD - yB) / (xD - xB) = (-1 - 5) / (3 - (-3)) = -6/6 = -1
Using the point-slope form of a linear equation, the equation of the line passing through B and D is:
y - yB = slope_BD * (x - xB)
Substituting the coordinates of point B and the slope, we get:
y - 5 = (-1) * (x + 3)
x + y + 8 = 0 ...........(Equation 2)
To find the coordinates of point E, we solve the system of equations formed by Equations 1 and 2. By solving these equations, we find that the coordinates of point E are [0, 1].
Learn more about Coordinates
brainly.com/question/32836021
#SPJ11