3.72÷ 10 4 which of these shows and explains the correct location of the decimal point when the expression is evaluated?

a 0.0000372 because 4 zeros are placed in front of the number when you divide by 104 b 0.000372 because the decimal point moves 4 places to the left when you divide by 104 c 37,200 because the decimal point moves 4 places to the right when you divide by 104 d 3,720,000 because 4 zeros are placed after the number when you divide by 104

we know that the spinner has an equal chance of landing on each section. Since there are a total of six sections on the spinner, we can assume that the probability of the arrow landing on any one section is 1/6 or approximately 0.1667.

Now, if the arrow is spun 72 times, we can use this probability to calculate the expected number of times the arrow will land on 4. To do this, we simply multiply the probability by the number of spins, as follows:

Expected number of times arrow lands on 4 = Probability of arrow landing on 4 x Number of spins
Expected number of times arrow lands on 4 = 0.1667 x 72
Expected number of times arrow lands on 4 = 12

So, we can expect the arrow to land on 4 approximately 12 times out of 72 spins. Of course, this is just an expected value, and the actual number of times the arrow lands on 4 may vary from this value due to random chance.

In summary, if we assume that the arrow on the spinner is equally likely to land on each section, and it is spun 72 times, we can expect the arrow to land on 4 approximately 12 times based on probability calculations.

To know more about arrow refer here

https://brainly.com/question/12509484#

#SPJ11

Answer:

Begin by simplifying the phrases within the brackets, beginning with the innermost brackets:

(2 x 3)^-1 = 1/6 (because 2 x 3 = 6, and the negative exponent flips the fraction)

1/2^3 = 1/8 (because 2^3 = 8)

So, (2x3)^-1x1/2^3 = 1/6 x 1/8 = 1/48

Next, simplify the expression outside the parentheses:

(3x2^2)^-2 = 1/(3x2^2)^2 = 1/(3^2 x 2^4) = 1/36 x 1/16 = 1/576

Now, substitute the simplified terms back into the original expression and simplify:

3x(1/48)x(1/576) = 1/768

So the final answer is 1/768.

To simplify the given function F(x) = x(x^2 - 4) - 3x(x - 2), we need to use the distributive property and combine like terms.

First, we distribute x in the first term, and we get:

F(x) = x^3 - 4x - 3x^2 + 6x

Next, we can combine like terms:

F(x) = x^3 - 3x^2 + 2x

Therefore, the simplified form of the given function F(x) = x(x^2 - 4) - 3x(x - 2) is F(x) = x^3 - 3x^2 + 2x.

Answer:

13.6 miles/minute

Step-by-step explanation:

We Know

A plane travels 462.4 miles in 34 minutes.

Identify the constant of proportionality in the situation..

We Take

462.4 / 34 = 13.6 miles/minute

So, the answer is 13.6 miles/minute

y < four-fifthsx - one-fifth

y < 2x + 6

The given system of inequalities can be represented in slope-intercept form as follows:

y < (4/5)x - 1/5

y < 2x + 6

To convert the given inequalities into slope-intercept form, we rearrange each equation to solve for y

In the first inequality, we add 5y to both sides and then divide by 4 to isolate y. This gives us:

4x - 5y < 1

-5y < -4x + 1

y > (4/5)x - 1/5

In the second inequality, we add x to both sides and then divide by -1/2 to isolate y. This gives us:

1/2y - x < 3

1/2y < x + 3

y > 2x + 6

Therefore, the given inequalities in slope-intercept form are:

y < (4/5)x - 1/5

y > 2x + 6

Learn more about inequalities

brainly.com/question/28823603

#SPJ11

The project completion time is output of the simulations, option A, the EXCEL function used is (c) 1+4*RAND() and the standard deviation is

(b) 1.47.

1) In this simulation, we enter commands based on the way that activity durations are distributed (here uniformly with predetermined intervals). We determine the project completion time as an output based on the command we used and our calculations. This value will fluctuate (slightly) when the simulation is run, hence it is not fixed.

Hence, the "project completion time" is an (a) Output of the simulation.

2) Here, it is given that time required to complete activity A is uniformly distributed in an interval [1, 5].

So, we require random numbers starting from 1 with an interval of length 5-1=4.

We know, during simulation using usual Excel function RAND() we obtain random numbers in an interval [0, 1].

Thus if we multiply usual Excel function RAND() by 4 and thus use 4*RAND(), then we obtain random numbers in an interval [0*4, 1*4] i.e

[0, 4].

Adding 1 to this Excel function i.e. using Excel function 1+4*RAND() we obtain random numbers in an interval [0+1, 4+1] i.e [1, 5].

Hence, the Excel function to be used to generate random numbers for the duration of activity A is (c) 1+4*RAND().

3) For [tex]\tiny X\sim Unif\left ( a,b \right )[/tex], variance is given by

[tex]\tiny Var\left ( X \right )=\frac{\left ( b-a \right )^2}{12}[/tex]

Variance for activity A is given by

[tex]\tiny \frac{\left ( 5-1 \right )^2}{12}=\frac{4^2}{12}=1.333333[/tex]

Variance for activity B is given by

[tex]\tiny \frac{\left ( 3-2 \right )^2}{12}=\frac{1^2}{12}=0.083333[/tex]

Variance for activity C is given by

[tex]\tiny \frac{\left ( 6-3 \right )^2}{12}=\frac{3^2}{12}=0.75[/tex]

Variance of project completion time in the project is \tiny [tex]1.333333+0.083333+0.75= 2.166666[/tex]

So, standard deviation of project completion time in the project is [tex]\tiny \sqrt {2.166666}=1.47196\approx 1.47[/tex]

Learn more about the Stimulation problems:

https://brainly.com/question/29573436

#SPJ4

Complete question:

A project has three activities A, B, and C that must be carried out sequentially. The probability distributions of the times required to complete each of the activities A, B, and C are uniformly distributed in intervals (1,5), (2,3) and (3,6) respectively. Find the total project completion time and run 1000 simulation trials in Excel. 7. The "project completion time" is a(n)... a. Output of the simulation b. Input of the simulation c. Decision variable in the simulation d. A fixed value in the simulation 8. Which of the following Excel functions would properly generate a random number for the duration of activity A in the project described above? a. 5* RANDO b. 1+5 * RANDO c. 1+4* RANDO d. NORM.INV(RAND(),1,5) e. NORM.INV(RAND(0,5,1) 9. The standard deviation of the project completion time in the project described above is cl a 2.83 b. 1.47 c. 1.15 d. 1.82 e. 1.63

The population of bacteria in the culture after 13 hours is approximately 1,656,320.

An equation is a statement that two expressions, which include variables and/or numbers, are equal. In essence, equations are questions, and efforts to systematically find solutions to these questions have been the driving forces behind the creation of mathematics.

We have the initial population, Po = 65000, and the doubling time, d = 2 hours. To find the population after 13 hours, we need to use the formula:

[tex]Pt = Po * 2^{(t/d)[/tex]

where Pt is the population after t hours, Po is the initial population, t is the time in hours, and d is the doubling time.

Substituting the given values, we get:

Pt = 65000 x [tex]2^{(13/2)[/tex]

Pt ≈ 1,656,320

Rounding this to the nearest whole number, we get:

The population of bacteria in the culture after 13 hours is approximately 1,656,320.

Learn more about equation on:

https://brainly.com/question/27893282

#SPJ9

Answer: The answer is 5.

Step-by-step explanation:

You first set up the equation

10 + 7x = 45

You must put x because you don't know the number of hours he stays

You then subtract 10 from both sides of the numbers 10 and 45

That'll get you 7x = 35

To find out what x is you divide both sides by 7

7x divided by 7 is x

35 divided by 7 is 5

X = 5

Entry debits the Depreciation Expense account for $7,000 and credits the Accumulated Depreciation account for the same amount, reflecting the decrease in the value of the machine over time.

To calculate  deprecation using the straight- line  system, we need to abate the residual value from the  original cost of the machine and  also divide the result by the estimated useful life. Using the given values, we have  

Cost of machine = $ 39,000

Residual value = $ 4,000  

Depreciable cost = $ 35,000($ 39,000-$ 4,000)

Estimated useful life =  5 times  

To calculate the periodic  deprecation  expenditure, we divide the depreciable cost by the estimated useful life  

Periodic  deprecation  expenditure = $ 7,000($ 35,000 ÷ 5)

Depreciation Expense $7,000

Accumulated Depreciation $7,000

Learn more about accounting at

https://brainly.com/question/29767967

#SPJ4

The journal entry is as given in figure:

This linear equation is invalid, the left and right sides are not equal, therefore there is no solution.

What in mathematics is a linear equation?

An algebraic equation with simply a constant and a first-order (linear) component, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation.

                         Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables. Equations with variables of power 1 are referred to be linear equations. axe+b = 0 is a one-variable example in which a and b are real numbers and x is the variable.

2x + -7 = -1(3 + -2x)

Reorder the terms:

-7 + 2x = -1(3 + -2x)

-7 + 2x = (3 * -1 + -2x * -1)

-7 + 2x = (-3 + 2x)

Add '-2x' to each side of the equation.

-7 + 2x + -2x = -3 + 2x + -2x

Combine like terms: 2x + -2x = 0

-7 + 0 = -3 + 2x + -2x

-7 = -3 + 2x + -2x

Combine like terms: 2x + -2x = 0

-7 = -3 + 0

-7 = -3

Solving

-7 = -3

Couldn't find a variable to solve for.

This equation is invalid, the left and right sides are not equal, therefore there is no solution.

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Katie should be able to make it from point A to point B in less than ten minutes and win the bet.

A minute is a unit of time equal to 60 seconds or one sixtieth of an hour. It is commonly used to measure short periods of time, such as the duration of a phone call or a meeting. The symbol for minute is "min".

To determine whether Katie Ledecky can make it from point A to point B in less than ten minutes, we need to calculate the distance between the two points and compare it to her swimming speed.

From the given information, we can use the Law of Cosines to find the distance between points A and B:

[tex]c^2 = a^2 + b^2 - 2ab cos(C)[/tex]

where c is the distance between points A and B, a is the distance from point A to point C, b is the distance from point B to point C, and C is the angle between sides a and b.

Plugging in the given values, we get:

[tex]c^2 = 620^2 + 455^2 - 2(620)(455) cos(150°)\\\\c^2 = 383,825[/tex]

c ≈ 619.5 yards

So the distance between points A and B is approximately 619.5 yards.

Now, we need to determine whether Katie Ledecky can swim this distance in less than ten minutes. We are given that she swam 1,000 yards in 8 minutes and 59.65 seconds, which is approximately 8.99 minutes. So her average speed for the 1,000 yard freestyle was:

speed = distance / time

speed = 1,000 yards / 8.99 minutes

speed ≈ 111.23 yards/minute

To swim the distance between points A and B in less than ten minutes, Katie would need to swim at an average speed of:

speed = distance / time

speed = 619.5 yards / 10 minutes

speed = 61.95 yards/minute

Katie's Olympic level swimming speed of 111.23 yards/minute is significantly faster than the required average speed of 61.95 yards/minute to swim from point A to point B in under ten minutes. Therefore, she should be able to make it from point A to point B in less than ten minutes and win the bet.

To know more about minute visit:

https://brainly.com/question/23365957

#SPJ1

Answer:

the answer is A

Step-by-step explanation:

√3 = Irrational

√12 = Irrational

but if

√3 × √ 12 = √36 = 6 = rational

The area of the region enclosed by one loop of the curve r = 4cos(θ) is 4 square units. The slope of the tangent line to the polar curve r=1 - 2sin(θ) at θ = π/4 is  2 + √2.

Area of region enclosed by one loop of the curve r = 4cos(2θ)

The curve r = 4cos(2θ) has two loops, and we need to find the area of one loop, which is from θ = 0 to θ = π/4.

To find the area, we use the formula for the area enclosed by a polar curve

A = (1/2) ∫[a,b] r^2 dθ

where r is the polar function, and a and b are the angles of the region we want to find the area for.

So, the area of one loop is

A = (1/2) ∫[0,π/4] (4cos(2θ))^2 dθ

= 8 ∫[0,π/4] cos^2(2θ) dθ

Using the identity cos(2θ) = (cos^2θ - sin^2θ), we can rewrite the integrand as

cos^2(2θ) = (cos^2θ - sin^2θ)^2

= cos^4θ - 2cos^2θsin^2θ + sin^4θ

= (1/2) (1 + cos(4θ)) - (1/2) sin^2(2θ)

So, the integral becomes

A = 8 ∫[0,π/4] [(1/2) (1 + cos(4θ)) - (1/2) sin^2(2θ)] dθ

= 4 [θ/2 + (1/8)sin(4θ) - (1/4)θ - (1/8)sin(2θ)]|[0,π/4]

= 1 + (2/π)

Therefore, the area of one loop of the curve r = 4cos(2θ) is 1 + (2/π).

Slope of tangent line to the polar curve r = 1-2sinθ at θ = π/4

To find the slope of the tangent line, we need to take the derivative of the polar function with respect to θ:

dr/dθ = -2cosθ

Then, we can use the formula for the slope of the tangent line in polar coordinates

dy/dx = (dy/dθ) / (dx/dθ) = (r sinθ) / (r cosθ) = tanθ + r dθ/dθ

At the point specified by θ = π/4, we have

r = 1 - 2sin(π/4) = 1 - √2/2 = (2 - √2)/2

dθ/dθ = 1

So, the slope of the tangent line is

dy/dx = tan(π/4) + r dθ/dθ

= 1 + (2 - √2)/2

= (4 + 2√2)/2

= 2 + √2

Therefore, the slope of the tangent line to the polar curve r = 1-2sinθ at θ = π/4 is 2 + √2.

To know more about tangent line:

https://brainly.com/question/31326507

#SPJ4

Answer:

d=1

Step-by-step explanation:

(i have to write this cuz i cant write less than 20 words)

148.35 cubic feet is the volume of a cylinder with height of 7 inches and a base diameter of 18ft

We have to find the volume of a cylinder

V=πr²h

h is the height of cylinder and r is radius of the base.

Given height is 7 inches which is 0.583333 feet

Diameter is 18 ft

Radius is 9 ft

Now plug in value of height and radius

Volume=π(9)²×0.5833

=3.14×81×0.5833

=148.35 cubic feet

To learn more on Three dimensional figure click:

https://brainly.com/question/2400003

#SPJ1

The probability of rolling a number larger than 2 and drawing an Ace or 4 is 2/39. There are 4 numbers larger than 2 and 2 Aces and 1 4 in a deck of 52 cards and a total of 6 outcomes that meet the criteria.

The probability of rolling a number larger than 2 is 4/6, which simplifies to 2/3. The probability of drawing an Ace or 4 is 4/52, which simplifies to 1/13. To find the probability of both events happening, you multiply the probabilities

P(rolling a number larger than 2 and drawing an Ace or 4) = P(rolling a number larger than 2) x P(drawing an Ace or 4)

= (2/3) x (1/13)

= 2/39

Therefore, the probability of number larger than 2 and drawing an Ace or 4 is 2/39.

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

Answer:

The length of one leg of this right triangle is 4/√2 = 2√2 cm.

Therefore , the solution of the given problem of triangle comes out to be the jewellery's circumference is 12 mm.

If a polygon contains at least one more segment, it is a hexagon. It is a simple rectangle in shape. Anything like this can only be distinguished from a standard triangle form by edges A and B. Even if the edges are perfectly collinear, Euclidean geometry only creates a portion of the cube. A triangle is made up of a quadrilateral and three angles.

Here,

The lengths of all three sides must be added up in order to determine the jewellery's perimeter.

=> c²= a² + b²

where a and b are the lengths of the other two sides, and c is the length of the hypotenuse.

=> A = 3mm, and B = 4mm.

Therefore, we can determine the length of the hypotenuse using the Pythagorean theorem:

=> c² = a²+ b²

=> c² = 3² + 4²

=> c² = 9 + 16

=> c² = 25

=> c = √25)

=> c = 5 mm

As a result, the hypotenuse is 5 mm long.

We total the lengths of all three sides to determine the jewellery's perimeter:

=> perimeter = 4mm, 3mm, and 5mm.

=> 12 mm is the diameter.

Therefore, the jewellery's circumference is 12 mm.

To know more about triangle visit:

brainly.com/question/2773823

#SPJ1

In this line plot, the Xs represent the heights of the plants, and the A represents the number of plants with that height.

The line plot that correctly shows Joel's data is:

Plant Heights

Х

Х

X

X

A

0

Height (feet)

In this line plot, the Xs represent the heights of the plants, and the A represents the number of plants with that height. According to the given data, there are two plants with a height of 1 foot, one plant with a height of 2 feet, and one plant with a height of 3 feet. Therefore, the correct line plot would have an X above the 2 and two As above it, an X above the 1 and one A above it, and an X above the 3 and one A above it. The other line plot shown does not correctly represent Joel's data.

Learn more about heights

brainly.com/question/10726356

#SPJ11

The horizontal distance between the two cafes is approximately 19.36 meters.

To solve this problem, we can use the Pythagorean theorem which states that in a right-angled triangle, the square of the hypotenuse (the longest side) is equal to the sum of the squares of the other two sides.

In this case, the atrium can be considered as the base of a right-angled triangle, with the difference in height between the two cafes as the vertical side and the distance between them as the hypotenuse.

Let's call the horizontal distance we are looking for "x". Using the Pythagorean theorem, we have:

[tex]x^2 = 20^2 - (15 - 10)^2\\x^2 = 400 - 25\\x^2 = 375[/tex]

x ≈ 19.36

Therefore, the horizontal distance between the two cafes is approximately 19.36 meters.

In this problem, we can see that the height of the cafes above the ground floor is not directly relevant to finding the horizontal distance between them. Instead, the height difference is used as the vertical side of the right-angled triangle, while the distance between the cafes is the hypotenuse. By using the Pythagorean theorem, we can find the horizontal distance that we are looking for.

To know more about Pythagorean theorem, refer to the link below:

https://brainly.com/question/14930619#

#SPJ11

We can see that the absolute minimum occurs at (x, y) = (2, -48).

To find the relative and absolute extrema of the function g(x) = 3x³ - 36x on the domain [-4, 4], we first need to find the critical points. We do this by finding the first derivative, setting it to zero, and solving for x.

g'(x) = d(3x³ - 36x)/dx = 9x² - 36

Setting g'(x) to 0:

0 = 9x² - 36
x² = 4
x = ±2

These are our critical points. To determine if these are minima, maxima, or neither, we use the second derivative test.

g''(x) = d(9x² - 36)/dx = 18x

At x = -2:
g''(-2) = -36 < 0, so it's a relative maximum.

At x = 2:
g''(2) = 36 > 0, so it's a relative minimum.

Now, we need to compare the function values at the critical points and endpoints of the domain to determine the absolute extrema.

g(-4) = 3(-4)³ - 36(-4) = -192
g(-2) = 3(-2)³ - 36(-2) = 48 (relative maximum)
g(2) = 3(2)³ - 36(2) = -48 (relative minimum)
g(4) = 3(4)³ - 36(4) = 192

From the above values, we can see that the absolute minimum occurs at (x, y) = (2, -48).

To learn more about absolute minimum, refer below:

https://brainly.com/question/29030328

#SPJ11

a. Which interval contains the most data values?

2–3 rebounds

b. How many games did the player play during the season?

The player played 12 games.

c. In what percent of the games did the player have 4 or more rebounds?

The player had 4 or more rebounds in 25% of the games.

A depiction of frequency distribution is graphically manifested in a histogram where data identified as bars show the number of occurrences in a specific range or category.

The x-axis indicates value ranges, and the y-axis exhibits "counts" or "frequency". This statistical tool helps examine patterns and visualize different types of data variation by industry professionals such as financial analysts, economists, and social scientists across many fields, among others.

Read more about histogram here:

https://brainly.com/question/28164315

#SPJ1

Knowing that tan(x) = 3/5 and using a trigonometric identity, we will get that:

tan(2x) = 1.875

There is a trigonometric identity we can use for this, we know that:

[tex]tan(2x) = \frac{2tan(x)}{1 - tan^2(x)}[/tex]

So we only need to knos tan(x), which we already know that is equal to 3/5, then we can replace it in the formula above to get:

[tex]tan(2x) = \frac{2*3/5}{1 - (3/5)^2}\\\\tan(2x) = \frac{6/5}{1 - 9/25} \\tan(2x) = 1.875[/tex]

That is the value of the tangent of 2x.

Learn more about the tangent function at:

https://brainly.com/question/1533811

#SPJ1

If at the previous appointment the baby weighed 10 pounds and 8 ounces, then the baby has gained 12 ounces since the last appointment.

To calculate this, we need to subtract the weight at the previous appointment from the weight at the current appointment:

11 pounds and 4 ounces - 10 pounds and 8 ounces = 12 ounces

So the baby has gained 12 ounces since the last appointment. It's important to keep track of a baby's weight gain, as it is an indicator of their growth and overall health.

It's also worth noting that the rate of weight gain can vary for each baby, so it's important to discuss any concerns or questions with a pediatrician. Additionally, other factors like height, head circumference, and developmental milestones should also be taken into consideration when evaluating a baby's growth.

To know more about  baby's growth refer here:

https://brainly.com/question/14433245#

#SPJ11

Answer:

(a) G(t) = (1.68 × 10^-4) × (1/3) t^3 - (0.02/2) t^2 - 0.10t - 2445.84

(b) A(t) = G(t) - G(1900) = (1.68 × 10^-4) × (1/3) (t^3 - 1900^3) - (0.02/2) (t^2 -     1900^2) - 0.10(t - 1900)

Step-by-step explanation:

(a) The antiderivative of g(t) can be found by integrating each term of the function with respect to t:

∫g(t) dt = ∫(1.68 × 10^-4)t^2 dt - ∫0.02t dt - ∫0.10 dt

= (1.68 × 10^-4) × (1/3) t^3 - (0.02/2) t^2 - 0.10t + C

where C is the constant of integration.

To find the specific antiderivative G(t) that passes through the point (1970, 94.8), we can use this point to solve for C:

94.8 = (1.68 × 10^-4) × (1/3) (1970)^3 - (0.02/2) (1970)^2 - 0.10(1970) + C

C = 94.8 + (1.68 × 10^-4) × (1/3) (1970)^3 - (0.02/2) (1970)^2 - 0.10(1970)

C ≈ -2445.84

Therefore, the specific antiderivative that gives the gender ratio is:

G(t) = (1.68 × 10^-4) × (1/3) t^3 - (0.02/2) t^2 - 0.10t - 2445.84

(b) The accumulation function of g is the integral of g with respect to t, or:

A(t) = ∫g(t) dt = G(t) + C

where C is the constant of integration. We can find the value of C using the initial condition given in the problem:

A(1900) = ∫g(t) dt ∣t=1900 = G(1900) + C = 0

Therefore, C = -G(1900), and the accumulation function of g is:

A(t) = G(t) - G(1900) = (1.68 × 10^-4) × (1/3) (t^3 - 1900^3) - (0.02/2) (t^2 - 1900^2) - 0.10(t - 1900)

To know more about antiderivative refer here

https://brainly.com/question/31385327#

#SPJ11

Based on the hypothesis test, with a significance level of 0.05, there is no evidence to suggest that the die is loaded, as the p-value is greater than the significance level. The null hypothesis that the die is fair is failed to rejected.

To determine if the die is loaded, we need to perform a hypothesis test.

Null Hypothesis (H0) The die is fair; all outcomes are equally likely.

Alternative Hypothesis (Ha) The die is loaded, and not all outcomes are equally likely.

We will use a significance level of 0.05.

To test the hypothesis, we can use a chi-square goodness-of-fit test.

First, we need to calculate the expected frequencies for each outcome, assuming that the die is fair. Since there are six possible outcomes, each with an expected frequency of 200/6 = 33.33.

Number Observed Frequency (O) Expected Frequency (E) (O - E)² / E

1 45 33.33 3.48

2 39 33.33 0.87

3 35 33.33 0.07

4 25 33.33 1.83

5 27 33.33 0.99

6 29 33.33 0.44

The test statistic is the sum of (O-E)² / E, which is 7.68.

The degrees of freedom for this test are (number of categories - 1) = 5.

Using a chi-square distribution table or calculator, we find that the p-value associated with a test statistic of 7.68 and 5 degrees of freedom is approximately 0.177.

Since the p-value is greater than our significance level of 0.05, we fail to reject the null hypothesis. We cannot conclude that the die is loaded based on this data alone.

To know more about Null hypothesis:

https://brainly.com/question/28920252

#SPJ4

The slope of UF is 1/6

The slope of a line is a measure of its steepness. Mathematically, slope is calculated as "rise over run" (change in y divided by change in x).

The slope is given = change in point on y axis/ change in point on x axis

slope = y2-y1/x2-x1

The cordinate of F = (-2,-3) and U ( 4, -2)

y1 = -3 and y2 = -2

x1 = -2 and x2 = 4

slope = -2-(-3)/4-(-2)

= -2+3/(4+2)

= 1/6

therefore the slope of UF is 1/6

learn more about slope from

https://brainly.com/question/16949303

#SPJ1