5) Find the electric current of this circuit:
( ) 5 A
( ) 8.5 A
( ) 3 A
( ) 10 A

The mass to be hung at a point 40cm to the right of the pivot point such that the stick hangs level is 15 g.

To solve this problem, use the principle of moments which states that the sum of the clockwise moments about a pivot point is equal to the sum of the counterclockwise moments about the same pivot point. In this case, take the pivot point to be the suspension point of the meter stick.

Let x be the mass that needs to hang at a point 40cm to the right of the pivot point. Then, set up the following equation:

(clockwise moment) = (counterclockwise moment)

(0.2 kg) × (0.3 m) × (9.81 m/s²) = (x kg) × (0.4 m) × (9.81 m/s²) + (0.1 kg) × (0.1 m) × (9.81 m/s²)

Simplifying this equation:

0.05886 = 3.924x

x = 0.015 kg or 15 g

Therefore, we need to hang a 15 g mass at a point 40 cm to the right of the pivot point such that the stick hangs level.

Find out more on pivot here: https://brainly.com/question/29526863

#SPJ1

In electrical and electronics circuits, amplitude is the maximum value of a signal. This is known as the strength or intensity of the signal. Phase, can be seen as the timing relationship between two signals or waveforms. It tell the time it takes betwen the peaks or zero crossings of two waveforms

In electrical and electronics circuits, phase tell us about the the relationship between currents in different parts of the circuit, For example in AC circuits with multiple components.

We the amplitude and phase of signals in electrical and electronics circuits is understood, it becomes easier to design and analyz circuits, and can even be used for troubleshooting and maintaining them.

Learn more about amplitude ;

https://brainly.com/question/15930409

#SPJ1

Answer:

False.

Explanation:

Sonography uses high-frequency sound waves, not infrasonic waves, to create images of objects found inside other objects. These sound waves bounce off the internal structures of the body and are detected by a transducer, which converts them into images that can be visualized on a screen.

Infrasonic waves are sound waves with frequencies lower than the range of human hearing, typically below 20 Hz.

Answer: She passed at 19 years old.

Explanation:

Answer:

To calculate the minimum total speed required for the projectile to escape the Earth's gravitational pull, we can use the equation for escape velocity:

v_escape = sqrt(2GM/R)

where G is the gravitational constant, M is the mass of the Earth, and R is the radius of the Earth.

Plugging in the given values, we get:

v_escape = sqrt(26.67e-115.98e24/6370000)

v_escape = 11186.4 m/s

This is the minimum total speed required for the projectile to escape the Earth's gravitational pull. In order to achieve this speed, the projectile would need to be launched with a velocity of 11186.4 m/s relative to the Earth.

Explanation:

The acceleration of the racing camel is 1.38 m/s².

From Newton's second law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration

Given that:

To determine the acceleration of the camel, pug the given values into the abovr formula and solve for a.

F = m × a

897N = 650 kg × a

Note that: Newton N is the same as kg·m/s²

Hence;

897kg·m/s² = 650 kg × a

Divide both sides by 650 kg

a = (897kg·m/s²) / (650 kg)

a = 1.38 m/s²

Therefore, the acceleration is 1.38 meters per second sqaure.

Learn more about force here: https://brainly.com/question/11737731

#SPJ1

To convert one system of unit to another  of derived quantities is not a use of dimensional analysis.

Checking for consistency in the dimensions on both sides of an equation entails looking at the dimensions of the physical quantities involved in a problem, such as length, mass, time, electric charge, and temperature.

The core tenet of dimensional analysis is that physical quantities, such as length, mass, and time, may be described in terms of their basic dimensions.

Learn more about dimensions:https://brainly.com/question/1769579

#SPJ1

All of the options listed are included in the uses of dimensional analysis.

Dimensional analysis is a powerful tool used in physics to:

The dimensional analysis involves analyzing the dimensions of physical quantities and using them to establish relationships between them.

By using the principles of dimensional analysis, we can simplify complex physical problems and gain insights into the behavior of physical systems.

More on dimensional analysis can be found here: https://brainly.com/question/13156854

#SPJ1

Answer:

.04 kg

Explanation:

The equation for simple harmonic motion is x = A*cos(ωt), where A is the amplitude, ω is the angular frequency, and t is the time.

Comparing the given equation x = 2.0cos(50t) with the equation for simple harmonic motion, we see that A = 2.0 meters and ω = 50 radians/second.

The angular frequency is related to the spring constant and mass by the equation ω = sqrt(k/m), where sqrt denotes the square root.

Substituting the values given, we get:

50 = sqrt(100/m)

Squaring both sides and solving for m, we get:

m = 100/2500 = 0.04 kg

Answer:

he tripped ballanced forces ballanced forces

Answer:

B. 200 kgm/s

Explanation:

The initial momentum of the blue train can be calculated using the formula:

p = mv

where p is the momentum, m is the mass, and v is the velocity.

The mass of the blue train is 50 kg and its velocity is 4 m/s. Therefore, the initial momentum of the blue train is:

p = 50 kg x 4 m/s = 200 kgm/s

Therefore, the initial momentum of the blue train is 200 kgm/s, which is option B.

Answer: mass and speed

Explanation: Remember kinetic energy equals 1/2mv^2 so it is dependent on mass and velocity which is speed.

Answer:

1.2 E10 N/C

Explanation:

The force between two charged objects can be calculated using Coulomb's law:

F = k * q1 * q2 / r^2

where F is the force, k is Coulomb's constant (k = 8.99 x 10^9 N m^2 / C^2), q1 and q2 are the charges of the two objects, and r is the distance between them.

Rearranging this equation to solve for the electric field at a point, we get:

E = F / q

where E is the electric field strength and q is the charge at that point.

Substituting the given values, we get:

E = (2.0 x 10^-9 N) / (1.62 x 10^-19 C)

E = 12345.68 N/C

Therefore, the magnitude of the electric field at this location is 1.235 x 10^4 N/C.

In the 1600s, a scientist by the name of Robert Boyle made the first known demonstration of the fact that a sound cannot pass through void space. Boyle placed the clock in a glass jar with a tight lid.

Pump out the air from the sealed bell jar while putting an electrical bell inside. Set the electric bell to ringing. We cannot hear the sound that the bell makes with our ears. This indicates that sound waves require a material environment for propagation because they cannot move through a vacuum.

Since sound waves are carried from one location to another by the molecules of solids, liquids, and gases, sound requires a physical medium for propagation, such as a solid, liquid, or gas. Since there are no molecules in the vacuum that can vibrate and convey sound waves, sound cannot travel through it.

To know more about electric visit :

https://brainly.com/question/8971780

#SPJ1

The final volume of the gas is 1,515.24 m³.

The final volume of the gas is calculated by applying ideal gas law;

PV = nRT

Where;

At a constant temperature, we will have the following equation;

P₁V₁ = P₂V₂

V₂ = (P₁V₁) / P₂

V₂ = (0.51 atm)(2 mol)(8.31451 J/K·mol)(268 K) / (1.5 atm)

V₂ = 1,515.24 m³

Learn more about final volume here: https://brainly.com/question/29441065

#SPJ1

You could purchase a fitness tracker to help your performance in your current physical activity.

Fitness tracker would help you in the area of goal setting.

Fitness trackers are effective because they have helped my friends to improve workout routine.

Wearable fitness trackers can monitor data like heart rate, number of steps taken, distance traveled, and number of calories burned.

Supplements including protein powders, creatine, and beta-alanine can enhance recovery, muscular growth, and endurance.

Working with a coach or personal trainer can help you attain your fitness objectives by offering personalized training regimens, comments on form and technique, and accountability.

Learn more about physical activity:https://brainly.com/question/14338730

#SPJ1

Influenza virus is not considered  as a bloodborne pathogen. The correct answer is option D.

Bloodborne pathogens are infectious microorganisms that can cause disease when transmitted through contact with infected human blood or other body fluids.

They can include viruses, bacteria, and other microorganisms that can cause serious illness or even death.

Influenza virus is not considered a bloodborne pathogen because it is primarily a respiratory virus that spreads through droplets when an infected person talks, coughs, or sneezes.

It can also spread through contact with contaminated surfaces or objects, but it is not primarily transmitted through contact with blood or other body fluids.

For more such questions on bloodborne pathogen, click on:

https://brainly.com/question/27986329

#SPJ11

The probable question may be:

Which of the following is not considered a bloodborne pathogen

A. Hepatitis B virus

B. Human immunodeficiency virus (HIV)

C. Hepatitis C virus

D. Influenza virus

Answer: The answer is C

Explanation: because I got it correct

C. A movement that results in the body's use of energy.

WHO has defined physical activity as any bodily movement that requires expenditure of energy.

Physical activity includes both exercise as well as integrated activities of one's daily routine.

To learn more about Physical activity

https://brainly.com/question/29313988

Answer: energy can flow from a colder object to a warmer object

only if something does work.

Explanation: Consider the flow of water from a higher level to a lower level. There is no need to use energy to make this process occur. This type of process which does not need the application of energy to take place is said to be spontaneous. But to make water go up to the water tank, a pump must be used to make the process take place. This type of process which needs the use of energy to make it happen is said to be nonspontaneous.
 

but why not the only way to reduce an object's temperature is to

increase the entropy of the environment.?

coz the motion of particles decreases and their velocity decreases so they have less entropy at a lower temperature.

hope it helped:)

The elongation of the rod beyond its original length would be 2.5 mm.

To elongation of the rod can be deduced using the formula:

ΔL = FL / AE

where:

The cross-sectional area of the steel rod is given by:

The force applied to the rod:

Thus:

ΔL = (98.1 x 2) / ((7.85 x [tex]10^{-7[/tex]) x (200 x [tex]10^9[/tex] ))

ΔL = 0.0025 m = 2.5 mm

In other words, the elongation of the steel rod beyond its original length is 2.5 mm.

More on Young modulus can be found here: https://brainly.com/question/14070556

#SPJ1

The final velocity of the motorcycle is

the total distance traveled during the 15-second timeframe is

Convert the initial velocity from mph to m/s:

75 mph = 75 x 0.44704 m/s = 33.528 m/s

Using vf = vi + at

where

vf is the final velocity,

vi is the initial velocity

a is the acceleration, and

t is the time interval.

Plugging in the given values, we get:

vf = 33.528 m/s - (0.25 m/s^2)(15 s) = 32.59 m/s

convert the final velocity back to mph

32.59 m/s = 32.59 x 2.237 mph/m = 72.9 mph

distance traveled, d

d = vi*t + (1/2)at^2

d = 32.59 m/s * 15 s + (1/2)(-0.25 m/s^2)(15 s)^2

d = 516.98 m

Learn more about final velocity at

https://brainly.com/question/25905661

#SPJ1

Answer:

The light spectrum measured for a nearby star can be used as a benchmark for more distant stars because two stars with identical spectra have the same intrinsic luminosity. Spectroscopy can be applied to light from a distant galaxy, but the dark lines in the solar spectrum give a unique pattern that can be used to identify the elements present in the star. The light spectrum of a distant galaxy that is moving rapidly away from the observer will be shifted towards the red end of the spectrum due to the Doppler effect, which causes the wavelengths of light to stretch out as the object moves away from the observer.

Gravity is the force responsible for the orbit of satellites. Gravity is an attractive force that acts between two objects with mass.

Satellites are man-made objects that are sent into space to orbit around a planet or other celestial body. They are used for a variety of purposes, including communication, navigation, scientific research, weather forecasting, and more. Satellites are equipped with advanced technology that allow them to transmit signals and data back to Earth, helping to make our lives easier in many ways. They are powered by solar panels and come in a variety of shapes and sizes. They can be stationary, meaning they stay in the same position as they orbit, or they can be geostationary, meaning they stay in the same point relative to the Earth's surface. They are also capable of providing real-time data and images to Earth-based observers. By using satellite technology, we can gain a better understanding of our planet, its climate, and its inhabitants.

This force is what causes satellites to orbit around a planet or star, as the gravitational pull of the planet or star causes them to move in a curved path.

To learn more about satellites
https://brainly.com/question/28103637
#SPJ1

Answer:

Explanation:

Yes, an object can travel with a non-zero velocity even when the net external force on it is zero. The object in this case is moving to the right with constant velocity and will continue in its state of motion as long as there are no external unbalanced forces acting on it.  This is Newton's First Law of Motion (aka the Law of Inertia).

(a) The S-P difference (sec) is 40 sec.

(b) The amplitude (mm) is 10 mm

(c) The distance (km) is 380 km

(d) The magnitude (M) is 4.5

What is the S-P wave difference (sec)?

The S-P wave difference (sec) is a measure used in seismology to determine the distance between a seismic station and an earthquake source.

From the graph, the S-P difference, that is between S and P = 40 s - 0 s

= 40 s

The distance (km) corresponding to 40 sec is 380 km.

The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.

The corresponding magnitude of the wave is 4.5.

Learn more about S-P wave difference here: https://brainly.com/question/15225142

#SPJ1

The pressure exerted by the girl is approximately 833,333.33 Pa (Pascals).

The mass m3 should be placed 0.8 m away from the fulcrum to achieve static equilibrium.

To achieve static equilibrium, the net torque acting on the system must be zero. The torque is given by the product of the force and the lever arm. Taking the fulcrum as the reference point, we can write:

(m1)(g)(0.9 m - 0.5 m) + (m2)(g)(0.2 m - 0.5 m) + (m3)(g)(x - 0.5 m) = 0

where g is the acceleration due to gravity (9.81 m/s^2) and x is the distance of the mass m3 from the fulcrum.

Simplifying and solving for x, we get:

x = [(m1)(0.9 m - 0.5 m) + (m2)(0.2 m - 0.5 m)] / (m3) + 0.5 m

x = [((60.0 kg)(0.4 m) + (20.0 kg)(-0.3 m))] / (10.0 kg) + 0.5 m

x = 0.8 m

Therefore, the mass m3 should be placed 0.8 m away from the fulcrum to achieve static equilibrium.

More on torque can be found here: https://brainly.com/question/30807709

#SPJ1