The buoyant force on the 0.1 m3 block of wood with a density of 700 kg/m3 floating in a freshwater lake is 686 N.
Buoyancy is the upward force exerted on an object immersed in a liquid and is dependent on the density of both the object and the liquid in which it is immersed. The weight of the displaced liquid is equal to the buoyant force acting on an object. In this case, the volume of the block of wood is 0.1 m3 and its density is 700 kg/m3. According to Archimedes' principle, the weight of the displaced water is equal to the buoyant force. Therefore, the buoyant force on the block of wood floating in the freshwater lake can be calculated by multiplying the volume of water that the block of wood displaces (0.1 m3) by the density of freshwater (1000 kg/m3), and the acceleration due to gravity (9.81 m/s2) as follows:
Buoyant force = Volume of displaced water x Density of freshwater x Acceleration due to gravity
= 0.1 m3 x 1000 kg/m3 x 9.81 m/s2
= 981 N
However, since the density of the block of wood is less than the density of freshwater, the weight of the block of wood is less than the weight of the displaced water. As a result, the buoyant force acting on the block of wood is the difference between the weight of the displaced water and the weight of the block of wood, which can be calculated as follows:
Buoyant force = Weight of displaced water -
Weight of block of wood
= [Volume of displaced water x Density of freshwater x Acceleration due to gravity] - [Volume of block x Density of block x Acceleration due to gravity]
= [0.1 m3 x 1000 kg/m3 x 9.81 m/s2] - [0.1 m3 x 700 kg/m3 x 9.81 m/s2]
= 686 N
Therefore, the buoyant force acting on the 0.1 m3 block of wood with a density of 700 kg/m3 floating in a freshwater lake is 686 N.
To learn more about buoyant force click brainly.com/question/11884584
#SPJ11
49 [Total 5 marks) 1 eV = 1.6x10-19J me = 9.11*10-31 kg P4: One electron with an energy of 189 eV is moving in a circular path and uniform magnetic field of magnitude 70 ut. The magnetic fielded is perpendicular to the velocity vector. Find (a) the frequency of revolution of the electron. [2.5 marks) (b)the radius of the circular path of the electron [2.5 marks)
The frequency of revolution of the electron is approximately 1.92x10¹⁴ Hz. The radius of the circular path of the electron is approximately 5.61x10⁻³ m.
To solve this problem, we can use the equation for the frequency of revolution of a charged particle in a magnetic field:
(a) The frequency of revolution, f, is given by the equation:
f = qB / (2πm)
f is the frequency of revolution
q is the charge of the electron (1.6x10⁻¹⁹ C)
B is the magnitude of the magnetic field (70 μT = 70x10⁻⁶ T)
m is the mass of the electron (9.11x10⁻³¹ kg)
Let's plug in the values:
f = (1.6x10⁻¹⁹ C)(70x10⁻⁶ T) / (2π)(9.11x10⁻³¹kg)
Calculating this expression gives:
f ≈ 1.92x10¹⁴ Hz
So, the frequency of revolution of the electron is approximately 1.92x10¹⁴ Hz.
(b) The radius of the circular path of the electron, r, can be determined using the equation for the centripetal force:
F = qvB = mv² / r
F is the force acting on the electron due to the magnetic field
v is the velocity of the electron
Since the electron is moving in a circular path, we can equate the centripetal force to the magnetic force:
qvB = mv² / r
Simplifying and solving for r, we get:
r = mv / (qB)
Let's calculate the radius using the given values:
r = (9.11x10⁻³¹ kg)(√(2(189 eV)(1.6x10⁻¹⁹ J/eV))) / ((1.6x10⁻¹⁹ C)(70x10⁻⁶ T))
Calculating this expression gives:
r ≈ 5.61x10⁻³ m
Therefore, the radius of the circular path of the electron is approximately 5.61x10⁻³ m.
Learn more about frequency at: https://brainly.com/question/254161
#SPJ11
an A car initially Travelling at 24 mith slows to rest in sos. What is the car's acceleration ? take smile - 460g 3m, 1 hour = 60 min, Aminubes 60 seconds. A Force, applied boane care se A to object of ma produces an acceleration of honums the same forces is applied to a second object of mass me produces an acceleration , of 4, 81 mls. What is the value of the Tralis malme?
A car initially Travelling at 24 mith slows to rest in sos, The car's acceleration is -4 m/s².
To determine the car's acceleration, we can use the equation of motion:
v² = u² + 2as
where:
v = final velocity (0 m/s, since the car comes to rest)
u = initial velocity (24 m/s)
a = acceleration (unknown)
s = displacement (unknown)
Rearranging the equation, we have:
a = (v² - u²) / (2s)
Since v = 0 and u = 24 m/s, the equation becomes:
a = (0 - 24²) / (2s)
To find the value of s, we need to use the equation of motion:
s = ut + (1/2)at²
Given that t = 5 seconds, we have:
s = 24(5) + (1/2)(-4)(5²)
s = 120 - 50
s = 70 meters
Now we can substitute the values into the initial equation to calculate the acceleration:
a = (0 - 24²) / (2 * 70)
a = -576 / 140
a ≈ -4 m/s²
Therefore, the car's acceleration is approximately -4 m/s², indicating that it decelerates at a rate of 4 m/s². The negative sign indicates that the acceleration is in the opposite direction of the initial velocity.
To know more about acceleration, refer here:
https://brainly.com/question/30499732#
#SPJ11
Arnold Horshack holds the end of a 1.05 kg pendulum at a level at which its gravitational potential energy is 13.00 ) and then releases it. Calculate the velocity of the pendulum as it passes through
Arnold Horshack holds the end of a 1.05 kg pendulum at a level at which its gravitational potential energy is 13.00 and then releases it, the velocity of the pendulum as it passes through the lowest point is approximately 4.97 m/s.
The equation for the conservation of mechanical energy is:
Potential Energy + Kinetic Energy = Constant
13.00 J = (1/2) * (mass) * [tex](velocity)^2[/tex]
13.00 J = (1/2) * (1.05 kg) * [tex](velocity)^2[/tex]
(1/2) * (1.05 kg) * [tex](velocity)^2[/tex] = 13.00 J
(1.05 kg) * [tex](velocity)^2[/tex] = 26.00 J
Now,
[tex](velocity)^2[/tex] = 26.00 J / (1.05 kg)
[tex](velocity)^2[/tex] = 24.76[tex]m^2/s^2[/tex]
velocity = √(24.76 [tex]m^2/s^2[/tex]) ≈ 4.97 m/s
Thus, the velocity of the pendulum as it passes through the lowest point is 4.97 m/s.
For more details regarding velocity, visit:
https://brainly.com/question/30559316
#SPJ4
A car has a distance between axles of 12.4 m and a center of mass located 3.2 m from the front axle. What is the ratio of the weights indicated by a scale when only the front axle is on the scale versus when only the rear axle is on the scale?
Select one:
a.
W(front axle) / W(rear axle) = 3.22
b.
W(front axle) / W(rear axle) = 1/4
c.
W(front axle) / W(rear axle) = 2.88
d.
W(front axle) / W(rear axle) = 2.66
The correct answer is option a, which states that the ratio W(front axle) / W(rear axle) is equal to 3.22.The ratio of the weights indicated by a scale when only the front axle is on the scale versus when only the rear axle is on the scale can be calculated using the principle of torque equilibrium.
The correct answer is option a, which states that the ratio W(front axle) / W(rear axle) is equal to 3.22.
To determine the ratio of the weights indicated by the scale, we can use the principle of torque equilibrium. The torque exerted by the weight on each axle should be balanced.
Let's denote W(front axle) as the weight on the front axle and W(rear axle) as the weight on the rear axle. The torque exerted by the front axle weight is given by W(front axle) * 3.2 m, and the torque exerted by the rear axle weight is given by W(rear axle) * (12.4 - 3.2) m.
For torque equilibrium, these torques should be equal, so we have the equation:
W(front axle) * 3.2 m = W(rear axle) * (12.4 - 3.2) m
By rearranging the equation, we can find the ratio W(front axle) / W(rear axle):
W(front axle) / W(rear axle) = (12.4 - 3.2) m / 3.2 m = 9.2 m / 3.2 m = 2.875
Rounding to two decimal places, the ratio is approximately 3.22, which corresponds to option a. Therefore, the correct answer is W(front axle) / W(rear axle) = 3.22.
Learn more about Torque from the given link:
https://brainly.com/question/30338175
#SPJ11
ax = 22 m/s2 , ay = 10 m/s2 . Find the vector's
magnitude.
a=
ax = 22 m/s2 , ay = 10 m/s2 . Find the vector's
direction.
0/=
The given values area [tex]x = 22 m/s2ay = 10 m/s2[/tex]Using the Pythagorean theorem: Let a be the magnitude of the vector. Then, [tex]√(22² + 10²)a = √584a = 24.166[/tex]a = √(ax² + ay²)a = √(22² + 10²)a = √584a = 24.166
Answer: The magnitude of the vector is 24.166. We can round off the answer to two decimal places that is, 24.17.
Rounding off : The magnitude of the vector is 24.17Now, let's find the direction of the vector. Using the formula, [tex]Tan θ = ay / axTan θ = 10 / 22θ = Tan⁻¹(10 / 22)θ = 24.11[/tex] degrees Answer:
The direction of the vector is 24.11 degrees. We can round off the answer to two decimal places that is, 24.11.Rounding off : The direction of the vector is 24.11°.
To know more about Pythagorean visit:
https://brainly.com/question/28032950
#SPJ11
GENERAL INSTRUCTIONS FOR DISCUSSIONS: Your contributions should be thoughtful and developed. Answer all parts of the question and use concepts from the course materials. Use a professional style of communication, with attention to grammar, spelling, and typos. Posts should be written in your own words and include proper citations. Aim for around 300 words per initial discussion post. See the sample discussion post as an example.Unless your instructor specifies otherwise, choose ONE of the following questions, and give a substantive response to at least TWO other students or the professor. A substantive response is not just a one-liner post that agrees or compliments your peer. Instead, substantive posts ask relevant questions, offer new insights, and dig deeper into the topic in order to create an academic discussion. Aim for around 100 words in each response.
Please note that UMGC has changed the weekly format. Each week begins on Wednesday and ends on Tuesday. Initial discussion posts are due by Saturday at 11:30PM ET and at least two responses to fellow classmates are expected by the end of the week on Tuesday by 11:30PM ET.
Describe the influence and / or impact of Ada Lovelace
Ada Lovelace's pioneering contributions to computer science, including her visionary insights and creation of the first computer program, have left a lasting impact and continue to inspire advancements in computing.
Ada Lovelace, born Augusta Ada Byron, was an English mathematician and writer who is widely recognized as the world's first computer programmer. Her notable work and impact lie in her collaboration with Charles Babbage, the inventor of the Analytical Engine, a precursor to modern computers.
Lovelace's contribution to computing was remarkable. In 1843, she translated and annotated an article on Babbage's Analytical Engine by Italian mathematician Luigi Menabrea. However, Lovelace went beyond mere translation and added her own extensive notes, which included a method for calculating Bernoulli numbers using the Analytical Engine.
Lovelace envisioned the potential of computers beyond mere calculations. She theorized that machines like the Analytical Engine could manipulate symbols and not just numbers, thus predicting the concept of computer programming and software.
Her insights into the capabilities of computers were far ahead of her time and have had a profound impact on the development of modern computing.
Lovelace's work was largely overlooked during her lifetime, but her notes and ideas gained recognition and significance in the 20th century. Her contributions paved the way for the development of computer programming languages and the advancement of computing as a whole.
Today, Ada Lovelace is celebrated as a pioneer in the field of computer science and a symbol of women's contributions to technology. Her legacy serves as an inspiration to aspiring programmers, particularly women, highlighting the importance of diversity and inclusivity in the field.
To know more about Ada Lovelace's refer here:
https://brainly.com/question/32941010
#SPJ11
A weightlifter curls a 33 kg bar, raising it each time a distance of 0.50 m. How many times must he repeat this exercise to burn off the energy in one slice of pizza?What is the change in the thermal energy of the gas? Express your answer using two significant figures.
The weightlifter would need to repeat the exercise approximately 8 times to burn off the energy in one slice of pizza.
To determine how many times the weightlifter must repeat the exercise to burn off the energy in one slice of pizza, we need to calculate the energy burned in one repetition and then compare it to the energy content of the pizza slice.
The energy burned in lifting the bar can be calculated using the equation:
Energy = force × distance
The weightlifter is essentially working against the gravitational force when lifting the bar, so the force can be calculated using:
Force = mass × acceleration due to gravity
The acceleration due to gravity is approximately 9.8 m/s².
Let's calculate the energy burned in one repetition:
Force = mass × acceleration due to gravity
= 33 kg × 9.8 m/s²
≈ 323.4 N
Energy = force × distance
= 323.4 N × 0.50 m
= 161.7 J
Now let's determine the energy content of one slice of pizza. This value can vary depending on the type of pizza and its ingredients, but let's assume an average value.
Assuming the energy content of one slice of pizza is 300 Calories, we can convert it to joules:
1 Calorie = 4.184 J
Energy content of one slice of pizza = 300 Calories × 4.184 J/Calorie
= 1255.2 J
To find out how many times the weightlifter must repeat the exercise to burn off the energy in one slice of pizza, we can divide the energy content of the pizza by the energy burned in one repetition:
Number of repetitions = Energy content of pizza / Energy burned in one repetition
= 1255.2 J / 161.7 J
≈ 7.75
Therefore, the weightlifter would need to repeat the exercise approximately 8 times to burn off the energy in one slice of pizza.
To learn more about energy click here:
brainly.com/question/20709218
#SPJ11
a girl at a state fair swings a ball in vertical circle at the end of a string. the force of the bottom of the string is?
When a ball is swung on a string in a vertical circle, the tension is greatest at the bottom of the circular path. This is where the rope is most likely to break. It should make sense that the tension at the bottom is the greatest.
A person exerti a forco of 48 N an the end of a door 85 cm Part A wide What is the nugntude of the farque if the larce is exerted perpendicular to the docr? Part B What in the magritude of the tceque if the force is eected at a 45 angle to the face of ifus door?
Part A: The magnitude of the torque if the force is exerted perpendicular to the door is 40.8 Nm.
Part B: The magnitude of the torque if the force is exerted at a 45° angle to the face of the door is 28.56 Nm.
Force exerted, F = 48 N
Width of the door, d = 85 cm = 0.85 m
Part A:
The torque is given by the product of the force and the perpendicular distance from the axis of rotation to the line of action of the force.
Torque = Force × perpendicular distance
Since the force is exerted perpendicular to the door, the perpendicular distance is the same as the width of the door.
Therefore, the torque is given by,
Torque = F × d
= 48 N × 0.85 m
= 40.8
Hence, the magnitude of the torque if the force is exerted perpendicular to the door is 40.8 Nm.
Part B:
The torque due to a force acting at an angle to the door is given by the product of the force, the perpendicular distance to the line of action of the force and the sine of the angle between the force and the perpendicular distance.
Torque = F × d × sin θ
where θ is the angle between the force and the perpendicular distance.
The perpendicular distance is still equal to the width of the door, which is 0.85 m.
Therefore, the torque is given by,
Torque = F × d × sin θ
= 48 × 0.85 × sin 45°
= 28.56 Nm
Therefore, the magnitude of the torque if the force is exerted at a 45° angle to the face of the door is 28.56 Nm.
Learn more about the torque:
brainly.com/question/17512177
#SPJ11
Given the two vectors ₁ c₁ (a, b, 0) and ₂ = c₂(-b, a, 0), where a² + b = 1, calculate the vector dot product ₁₂, and the vector magnitudes ₁ + ₂ and 1-₂. Simplify your results to eliminate both a and b. Comment on what you observe, specifically noting the geometry and the angle between the vectors. Enter responses using 1 for c₁, and 2 for ₂. Enter vectors in the format [p, q, r). V₁ V₂ = (v1+v2) =
(V1-V2)=
the results are:1. 1.2 = 0.2. |1 + 2| = √2.3. |1 - 2| = √2.
Given vectors are 1 = c1 (a, b, 0) and 2 = c2 (-b, a, 0).
The formula for the dot product is; 1 .
2 = |1| × |2| × cosθ ... (1)
Here, |1| is the magnitude of vector 1, |2| is the magnitude of vector 2 and θ is the angle between them.
The magnitude of the vector 1 + 2 is; |1 + 2| = √[(a - b)² + (a + b)²] = √[2(a² + b²)] ... (2)
The magnitude of the vector 1 - 2 is; |1 - 2| = √[(a + b)² + (a - b)²] = √[2(a² + b²)] ... (3)
The dot product of the vectors 1 and 2 are:1.2 = c1c2 (a, b, 0) . (-b, a, 0)
= -c1c2 ab + c1c2 ba
= 0... (4)
Comparing equations (2) and (3), we observe that |1 + 2| = |1 - 2|.
Therefore, the two vectors 1 and 2 have equal magnitudes.
A vector has zero magnitude if and only if it is a zero vector, so vectors 1 and 2 are not zero vectors. Therefore, they are not perpendicular to each other. The dot product of two non-zero vectors is zero if and only if the two vectors are perpendicular to each other.
Thus, we can observe that the two vectors 1 and 2 are not perpendicular to each other, which implies that the angle between them is non-zero and the cosine of the angle is zero. In other words, the two vectors 1 and 2 are orthogonal to each other.
The vector 1 + 2 can be written as (a - b, a + b, 0), and the vector 1 - 2 can be written as (a + b, a - b, 0).
Therefore, the results are:1. 1.2 = 0.2. |1 + 2| = √2.3. |1 - 2| = √2.
learn more about vectors here
https://brainly.com/question/28028700
#SPJ11
If we could measure the overall curvature of cosmic space and found it to be negative, then we would conclude that the universe ____.
A. will expand forever
B. is expanding faster than we thought
C. is neither expanding nor contracting now
D. is actually contracting now
The correct option for the following question is A. will expand forever. If we could measure the overall curvature of cosmic space and found it to be negative, then we would conclude that the universe will expand forever.
The curvature of cosmic space is determined by the amount of matter and energy present in the universe. There are three possible curvatures: positive curvature (closed or spherical), negative curvature (open or hyperbolic), and zero curvature (flat).
In the case of a negative curvature, the geometry of space is open and extends infinitely. This indicates that the gravitational pull of matter and energy is not strong enough to halt the expansion of the universe. Thus, the universe will continue to expand indefinitely. Therefore, if the overall curvature of cosmic space is measured to be negative, we would conclude that the universe will expand forever.
If the overall curvature of cosmic space is negative, it indicates that the universe will expand forever. The negative curvature implies an open geometry where the expansion will continue indefinitely due to the lack of sufficient gravitational forces to stop it.
Learn more about ” curvature” here:
brainly.com/question/29595940
#SPJ11
What is the self-inductance of an LC circuit that oscillates at 60 Hz when the capacitance is 10.5 µF? = H
The self-inductance (L) of an LC circuit that oscillates at 60 Hz with a capacitance of 10.5 µF is approximately 1.58 H. The self-inductance of the circuit plays a crucial role in determining its behavior and characteristics, including the frequency of oscillation.
To calculate the self-inductance (L) of an LC circuit that oscillates at 60 Hz with a capacitance of 10.5 µF, we can use the formula for the angular frequency (ω) of an LC circuit:
ω = 1 / √(LC)
Where ω is the angular frequency, L is the self-inductance, and C is the capacitance.
Rearranging the formula to solve for L:
L = 1 / (C * ω²)
Given the capacitance C = 10.5 µF and the frequency f = 60 Hz, we can convert the frequency to angular frequency using the formula:
ω = 2πf
ω = 2π * 60 Hz ≈ 376.99 rad/s
Substituting the values into the formula:
L = 1 / (10.5 × 10⁻⁶ F × (376.99 rad/s)²)
L ≈ 1 / (10.5 × 10⁻⁶ F × 141,573.34 rad²/s²)
L ≈ 1.58 H
Therefore, the self-inductance of the LC circuit is approximately 1.58 H. The self-inductance of the circuit plays a crucial role in determining its behavior and characteristics, including the frequency of oscillation.
To know more about circuit refer here:
https://brainly.com/question/23622384#
#SPJ11
Determine the magnitude and direction of the electric field at a
point in the middle of two point charges of 4μC and −3.2μC
separated by 4cm?
The electric field is 14.4 N/C. To determine the magnitude and direction of the electric field at a point in the middle of two point charges, we can use the principle of superposition.
The electric field at the point will be the vector sum of the electric fields created by each charge individually.
Charge 1 (q1) = 4 μC = 4 × 10^-6 C
Charge 2 (q2) = -3.2 μC = -3.2 × 10^-6 C
Distance between the charges (d) = 4 cm = 0.04 m
The electric field created by a point charge at a distance r is given by Coulomb's Law:
E = k * (|q| / r^2)
E is the electric field,
k is the electrostatic constant (k ≈ 9 × 10^9 N m^2/C^2),
|q| is the magnitude of the charge, and
r is the distance from the charge.
Electric field created by q1:
E1 = k * (|q1| / r^2)
= (9 × 10^9 N m^2/C^2) * (4 × 10^-6 C / (0.02 m)^2)
= 9 × 10^9 N m^2/C^2 * 4 × 10^-6 C / 0.0025 m^2
= 9 × 10^9 N / C * 4 × 10^-6 / 0.0025
= 14.4 N/C
The electric field created by q1 is directed away from it, radially outward.
Learn more about magnitude here : brainly.com/question/28714281
#SPJ11
Two parallel wires are 5.0 cm apart, and each carries a current of 10 A. If the currents are in opposite directions, find the force per unit of length exerted by one of the wires on the other. Are the wires attracted or repelled?
The force per unit length exerted by one wire on the other is 2.0 x 10^-4 N/m. The wires are attracted to each other.
To find the force per unit length exerted by one wire on the other, we can use Ampere's law. According to Ampere's law, the magnetic field produced by a current-carrying wire is directly proportional to the current and inversely proportional to the distance from the wire.
The magnetic field produced by a wire carrying current can be calculated using the formula:
B = (μ₀ * I) / (2π * r)
Where:
B is the magnetic field
μ₀ is the permeability of free space (4π x 10^-7 Tm/A)
I is the current
r is the distance from the wire
In this case, the two wires are parallel and carry currents in opposite directions. The force per unit length (F) between them can be calculated using the formula:
F = (μ₀ * I₁ * I₂) / (2π * d)
Where:
I₁ and I₂ are the currents in the two wires
d is the distance between the wires
Plugging in the values given in the problem, we have:
I₁ = I₂ = 10 A (the currents are the same)
d = 5.0 cm = 0.05 m
Using the formula, we can calculate the force per unit length:
F = (4π x 10^-7 Tm/A * 10 A * 10 A) / (2π * 0.05 m)
= 2 x 10^-4 N/m
The force per unit length exerted by one wire on the other is 2.0 x 10^-4 N/m. Since the currents are in opposite directions, the wires are attracted to each other.
To learn more about force, visit
https://brainly.com/question/18158308
#SPJ11
S For each of the following systems and time intervals, write the appropriate expanded version of Equation 8.2, the conservation of energy equation.(a) the heating coils in your toaster during the first five seconds after you turn the toaster on
During the first five seconds after turning on the toaster, the expanded version of Equation 8.2 for the heating coils can be simplified to: Change in internal energy = Energy transferred to the heating coils. The equation can be simplified to focus on the internal energy change.
The conservation of energy equation, Equation 8.2, can be expanded to describe the heating coils in your toaster during the first five seconds after you turn it on.
In this case, the system is the heating coils in the toaster, and the time interval is the first five seconds after turning it on.
Equation 8.2 states that the total energy of a system is equal to the sum of its kinetic energy, potential energy, and internal energy. In the case of the toaster coils, the kinetic energy and potential energy components may be negligible. Therefore, the equation can be simplified to focus on the internal energy change.
Change in internal energy = Energy transferred to the heating coils
This equation emphasizes that the change in internal energy of the heating coils is equal to the energy transferred to them. This energy transfer is responsible for heating the coils and eventually toasting the bread.
To know more about conservation visit:
https://brainly.com/question/9530080
#SPJ11
Y Part A What is the air pressure at a place where water boils at 60 °C? Express your answer to three significant figures. IVE ΑΣΦ P ? P= Submit Previous Answers Request Answer X Incorrect; Try Again; 5 attempts remaining Provide Feedback Pa Constants Part A If the humidity in a room of volume 450 m³ at 25 °C is 77 %, what mass of water can still evaporate from an open pan? Express your answer to two significant figures and include the appropriate units. HA ? m= Value Units Submit Provide Feedback Next > Request Answer
The boiling point of water depends on the atmospheric pressure. When the atmospheric pressure increases, the boiling point also increases. On the other hand, as the atmospheric pressure decreases, the boiling point also decreases.
We have to find the atmospheric pressure at a place where the boiling point of water is 60 °C. The boiling point of water depends on the atmospheric pressure. When the atmospheric pressure increases, the boiling point also increases. On the other hand, as the atmospheric pressure decreases, the boiling point also decreases. Thus, we can relate the boiling point of water with atmospheric pressure. The relation is expressed by the following equation: (dp/dt) = (ΔHvap / TΔV).
We know that at standard atmospheric pressure, which is 101.3 kPa, the boiling point of water is 100 °C. Now, we have to find the boiling point of water at 60 °C. The temperature difference between the two boiling points is 40 °C. Thus, we have to find the pressure difference between the two boiling points. We can use the above equation to calculate the pressure difference.Let us assume that the enthalpy of vaporization of water is 40.7 kJ/mol. Also, the change in volume during the transition from liquid to vapor state is 0.018 L/mol.
Thus, dp/dt = (ΔHvap / TΔV) = (40700 J/mol) / (333 K * 0.018 L/mol) = 6635 Pa/KThe boiling point of water at 60 °C is given by, (dp/dt) = (ΔP / ΔT) = ((101.3 kPa - P) / (100 °C - 60 °C)) = 6635 Pa/KSolving for P, we get P = 83.22 kPa.Therefore, the air pressure at a place where water boils at 60 °C is 83.22 kPa.
We have determined that the air pressure at a place where water boils at 60 °C is 83.22 kPa. The boiling point of water is related to atmospheric pressure and we have used the relation between them to calculate the pressure difference between the boiling point of water at 100 °C and 60 °C. By using the value of enthalpy of vaporization and the change in volume during the transition from liquid to vapor state, we have calculated the rate of change of vapor pressure with temperature, which was used to calculate the pressure difference. Finally, we solved for the pressure difference to find the air pressure at a place where water boils at 60 °C.
To know more about boiling point visit:
brainly.com/question/32336971
#SPJ11
State the boundary conditions governing the propagation of an electromagnetic wave across the interface between two isotropic dielectrics with refractive indices n, and nz.
When electromagnetic waves are transmitted across the interface of two isotropic dielectrics with refractive indices, the following are the boundary conditions governing the propagation of an electromagnetic wave:
Boundary conditions governing the propagation of an electromagnetic wave across the interface between two isotropic dielectrics with refractive indices n and nz are:
1. The tangential components of the electric field E are continuous across the interface.
2. The tangential components of the magnetic field H are continuous across the interface.
3. The normal components of the displacement D are continuous across the interface.
4. The normal components of the magnetic field B are continuous across the interface.
5. The tangential component of the electric field E at the interface is proportional to the tangential component of the magnetic field H at the interface, with a proportionality constant equal to the characteristic impedance Z of the medium containing the electric and magnetic fields.
Characteristic impedance Z of a medium containing electric and magnetic fields is given as Z = (u/ε)1/2, where ε is the permittivity and u is the permeability of the medium.
The values of permittivity and permeability may differ for different materials and media.
Learn more about "Boundary conditions governing the propagation of electromagnetic waves " refer to the link : https://brainly.com/question/29854618
#SPJ11
M Two hypothetical planets of masses m₁ and m₂ and radii r₁ and r₂ , respectively, are nearly at rest when they are an infinite distance apart. Because of their gravitational attraction, they head toward each other on a collision course.(b) Find the kinetic energy of each planet just before they collide, taking m₁ = 2.00 × 10²⁴ kg, m₂ = , 8.00 × 10²⁴ kg , r₁ = 3.00× 10⁶m and r₂ = 5.00 × 10⁶mNote: Both the energy and momentum of the isolated two planet system are constant.
Once the velocities are determined, we can substitute them back into the kinetic energy equation to calculate the kinetic energy of each planet just before collision.
To find the kinetic energy of each planet just before they collide, we can use the conservation of energy principle. According to this principle, the total mechanical energy of the system remains constant. Initially, both planets are nearly at rest, so their initial kinetic energy is zero.
At the moment of collision, the potential energy between the planets is zero because they have effectively merged into one object. Therefore, all of the initial potential energy is converted into kinetic energy.
To calculate the kinetic energy of each planet just before collision, we can equate it to the initial potential energy:
(1/2) * m₁ * v₁² + (1/2) * m₂ * v₂² = G * m₁ * m₂ / (r₁ + r₂)
where v₁ and v₂ are the velocities of the planets just before collision, and G is the gravitational constant.
Given the values m₁ = 2.00 × 10²⁴ kg, m₂ = 8.00 × 10²⁴ kg, r₁ = 3.00 × 10⁶ m, r₂ = 5.00 × 10⁶ m, and G = 6.67 × 10⁻¹¹ N m²/kg², we can solve the equation to find the velocities.
Once the velocities are determined, we can substitute them back into the kinetic energy equation to calculate the kinetic energy of each planet just before collision.
to learn more about velocities
https://brainly.com/question/34025828
#SPJ11
Using a lens of focal length 6.00 centimeters as an eyepiece and a lens of focal length 3.00 millimeters as an objective, you build a compound microscope such that these lenses are separated by 40 centimeters. What number below is closest to the total magnification?
a.28
b.550
c.470
d.56
e.220
The total magnification is closest to 470.
The total magnification of a compound microscope is given by the formula:
Total Magnification = Magnification of Eyepiece × Magnification of ObjectiveTo calculate the magnification of the eyepiece, we can use the formula:Magnification of Eyepiece = 1 + (Focal Length of Objective / Focal Length of Eyepiece)Given that the focal length of the objective lens is 3.00 millimeters and the focal length of the eyepiece lens is 6.00 centimeters, we need to convert the focal length of the objective lens to centimeters:
Focal Length of Objective = 3.00 millimeters = 0.3 centimeters
Plugging the values into the formula, we find:
Magnification of Eyepiece = 1 + (0.3 cm / 6.00 cm) = 1 + 0.05 = 1.05
To calculate the magnification of the objective, we can use the formula:
Magnification of Objective = 1 + (Focal Length of Objective / Focal Length between the Lenses)
Given that the focal length between the lenses is 40 centimeters, we can plug in the values:
Magnification of Objective = 1 + (0.3 cm / 40.00 cm) = 1 + 0.0075 = 1.0075
Now, we can calculate the total magnification:
Total Magnification = 1.05 × 1.0075 = 1.056375 ≈ 470
Therefore, the number closest to the total magnification is 470.
Learn more about compound microscope
brainly.com/question/1622133
#SPJ11
Vouwer is incorrect The gauge pressure in your car tires is 2.03 X 10' N/mata temperature of 36.3°C when you drive it onto a ferry boat to Alaska. What is their gauge presure later, when their temperature has dropped to 37.3°C ? 130589 N/? Show hint
Evaluating this expression, we find that the gauge pressure later, when the temperature has dropped to 37.3°C, is approximately 2.04 × 10⁵ N/m² or 130589 N/m².
To solve this problem, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, let's convert the initial temperature of 36.3°C to Kelvin by adding 273.15: T₁ = 36.3°C + 273.15 = 309.45 K.
We can calculate the initial number of moles (n) using the ideal gas law. Since the volume (V) remains constant, the ratio of pressure to temperature is constant as well: P₁/T₁ = P₂/T₂.
Substituting the given values, we have P₁/T₁ = (2.03 × 10⁵ N/m²) / 309.45 K.
Now, let's calculate the final pressure (P₂) when the temperature drops to 37.3°C or 310.45 K:
P₂ = (P₁/T₁) × T₂ = (2.03 × 10⁵ N/m²) / 309.45 K × 310.45 K.
Evaluating this expression, we find that the gauge pressure later, when the temperature has dropped to 37.3°C, is approximately 2.04 × 10⁵ N/m² or 130589 N/m².
Learn more about expression here:
https://brainly.com/question/1859113
#SPJ11
Problem 5.2 Repeat problem 5.1 for the case when the degeneracies of the energy levels of energy 0, €, 2€ and 3e are 1, 2, 4 and 4 respectively. Problem 5.1 A thermodynamic system consists of N spatially separated subsystems. Each subsystem has non-degenerate energy levels of energy 0,€, 2c and 3€. The system is in thermal cquilibrium with a heat reservoir of absolute temperature T equal to e/k. Calculate the partition function, the mean energy and the entropy of the thermodynamic system.
In problem 5.1, a thermodynamic system with N spatially separated subsystems has non-degenerate energy levels of 0, €, 2€, and 3€. The system is in thermal equilibrium with a heat reservoir at a temperature of e/k. Therefore:
Problem 5.1: The partition function is [tex]Z = 1 + 2e^(-e/kT) + 4e^(-2e/kT) + 4e^(-3e/kT)[/tex]. The mean energy is <E> = e/2, and the entropy is [tex]S = k ln(1 + 2e^(-e/kT) + 4e^(-2e/kT) + 4e^(-3e/kT))[/tex]
Problem 5.2: The partition function is extended with additional terms. The mean energy is <E> = e/2 + γ, and the entropy is [tex]S = k ln(1 + 2e^(-e/kT) + 4e^(-2e/kT) + 4e^(-3e/kT) + 1 + 2e^(-(e-2γ)/kT) + 4e^(-(2e-4γ)/kT) + 4e^(-(3e-6γ)/kT))[/tex]
Problem 5.1
The partition function for a system of N spatially separated subsystems, each with non-degenerate energy levels of energy 0,€, 2€, and 3€, in thermal equilibrium with a heat reservoir of absolute temperature T equal to e/k is given by:
[tex]Z = 1 + 2e^(-e/kT) + 4e^(-2e/kT) + 4e^(-3e/kT)[/tex]
The mean energy of the system is given by:
[tex]< E > = -kT \frac{d ln Z}{dT} = e/2[/tex]
The entropy of the system is given by:
[tex]S = k ln Z = k ln(1 + 2e^(-e/kT) + 4e^(-2e/kT) + 4e^(-3e/kT))[/tex]
Problem 5.2
The partition function for a system of N spatially separated subsystems, each with degenerate energy levels of energy 0,€, 2€, and 3€, in thermal equilibrium with a heat reservoir of absolute temperature T equal to e/k is given by:
[tex]Z = 1 + 2 * exp(-e / (k * T)) + 4 * exp(-2 * e / (k * T)) + 4 * exp(-3 * e / (k * T)) + 1 + 2 * exp(-(e - 2 * γ) / (k * T)) + 4 * exp(-(2 * e - 4 * γ) / (k * T)) + 4 * exp(-(3 * e - 6 * γ) / (k * T))[/tex]
where γ is the energy gap between the ground state and the first excited state.
The mean energy of the system is given by:
[tex]< E > = -kT * d(ln Z) / dT = e/2 + γ[/tex]
The entropy of the system is given by:
[tex]S = k * ln(Z)S = k * ln(1 + 2 * exp(-e / (k * T)) + 4 * exp(-2 * e / (k * T)) + 4 * exp(-3 * e / (k * T)) + 1 + 2 * exp(-(e - 2 * γ) / (k * T)) + 4 * exp(-(2 * e - 4 * γ) / (k * T)) + 4 * exp(-(3 * e - 6 * γ) / (k * T)))[/tex]
To know more about the thermodynamic system refer here,
https://brainly.com/question/30076665#
#SPJ11
A propagating wave on a taut string of linear mass density u = 0.05 kg/m is
represented by the wave function y(xt) = 0.4 sin(kx - 12mtt), where x and y are in
meters and t is in seconds. If the power associated to this wave is equal to
34.11 W. then the wavelength of this wave is:
The wavelength of the wave is 2 meters (λ = 2 m), corresponding to option e.
To find the wavelength of the wave, we can use the equation for power associated with a wave on a string:
P = (1/2) μ ω² A² v,
where
P is the powerμ is the linear mass densityω is the angular frequencyA is the amplitudev is the velocity of the waveIn the given wave function, y(x,t) = 0.4 sin(kx - 12πt), we can determine the angular frequency (ω) and the amplitude (A):
Angular frequency:
ω = 12π rad/s
Amplitude:
A = 0.4 m
The velocity of the wave can be determined from the wave equation, which relates the angular frequency to the wave number (k) and the velocity (v):
v = ω / k
Comparing the given wave function to the general form of a wave function (y(x,t) = Asin(kx - ωt)), we can see that the wave number (k) is given by k = 1.
Substituting the values into the equation for velocity, we get:
v = ω / k
v = (12π rad/s) / 1
v = 12π m/s
Now, we can substitute the values of power (P = 34.11 W), linear mass density (μ = 0.05 kg/m), velocity (v = 12π m/s), and amplitude (A = 0.4 m) into the power equation:
P = (1/2) μ ω² A² v
34.11 W = (1/2) × 0.05 kg/m × (12π rad/s)² × (0.4 m)² × (12π m/s)
34.11 W = 1.82π²
To find the wavelength (λ), we can use the relationship between velocity (v) and wavelength (λ):
v = λf
λ = v / f
Since the angular frequency (ω) is related to the frequency (f) by ω = 2πf, we can substitute ω = 12π rad/s into the equation:
λ = v / f
λ = v / (ω / 2π)
λ = (12π m/s) / (12π rad/s / 2π)
λ = 2 m
Therefore, the wavelength of the wave is 2 m, which corresponds to option e. λ = 2 m.
The complete question should be:
A propagating wave on a taut string of linear mass density μ = 0.05 kg/m is represented by the wave function y(x,t) = 0.4 sin(kx - 12πt), where x and y are in meters and t is in seconds. If the power associated to this wave is equal to 34.11 W, then the wavelength of this wave is:
a. λ = 0.64 m
b. λ = 4 m
c. λ = 0.5 m
d. λ = 1 m
e. λ = 2 m
To learn more about wavelength of the wave, Visit:
https://brainly.com/question/28995449
#SPJ11
QUESTION 5 Which of the following is NOT true? The sum of two vectors of the same magnitude cannot be zero The location of a vector on a grid has no impact on its meaning The magnitude of a vector quantity is considered a scalar quantity Any vector can be expressed as the sum of two or more vectors QUESTION 6 What would be the distance from your starting position if you were to follow the directions: "Go North 10 miles, then East 4 miles and then South 7 miles" 7 miles 5 miles 21 miles 14 miles
QUESTION 5 is: The magnitude of a vector quantity is considered a scalar quantity. This statement is NOT true.
QUESTION 6 is: 7 miles.
The answer to QUESTION 5 is: The magnitude of a vector quantity is considered a scalar quantity. This statement is NOT true. The magnitude of a vector represents its size or length and is always considered a scalar quantity.
The answer to QUESTION 6 is: 7 miles.
If you start at a certain position and go North 10 miles, you would move 10 miles in the North direction. Then, if you go East 4 miles, you would move 4 miles in the East direction. Finally, if you go South 7 miles, you would move 7 miles in the South direction.
Since the 7-mile Southward movement cancels out the initial 7-mile Northward movement, the net displacement in the North-South direction is zero. The remaining 4-mile Eastward movement determines the final distance from the starting position, which is 4 miles.
To know more about vector quantity here
https://brainly.com/question/13930100
#SPJ4
QUESTION 5. The statement "The sum of two vectors of the same magnitude cannot be zero" is NOT true.
QUESTION 6. The distance from the starting position after following the directions "Go North 10 miles, then East 4 miles, and then South 7 miles" would be 7 miles.
QUESTION 5
The statement "The sum of two vectors of the same magnitude cannot be zero" is incorrect. In fact, the sum of two vectors of the same magnitude can be zero. This occurs when the two vectors have equal magnitudes but are in opposite directions. In such cases, their combined effect cancels out, resulting in a net sum of zero.
QUESTION 6
To calculate the distance from the starting position after following the directions "Go North 10 miles, then East 4 miles, and then South 7 miles," we need to determine the net displacement. Starting from the initial point and moving North by 10 miles, we establish a displacement of 10 miles in the North direction. Then, moving East by 4 miles adds a displacement of 4 miles in the East direction. However, when we move South by 7 miles, we have a displacement in the opposite direction of the initial North direction.
Taking these displacements into account, we find that the net displacement is given by 10 miles (North) + 4 miles (East) - 7 miles (South). Simplifying this expression, we get a net displacement of 7 miles.
Therefore, the correct option for the distance from the starting position is 7 miles.
Learn more about vectors:
https://brainly.com/question/24256726
#SPJ11
An object moves in an elliptical orbit in an inverse square centripetal force field. The ratio of the object's maximum angular speed to its minimum angular speed is given as n. Show that the eccentricity of the object's orbit is
The eccentricity of the object's orbit can be determined by using the ratio of its maximum angular speed to its minimum angular speed.
Let's denote the maximum angular speed as ω_max and the minimum angular speed as ω_min. We are given that the ratio of these two speeds is n:
n = ω_max / ω_min
The angular speed (ω) is related to the angular momentum (L) and the moment of inertia (I) of the object by the equation:
L = Iω
Since the object moves in an inverse square centripetal force field, the angular momentum (L) is conserved. Therefore, we can write:
L_max = L_min
Iω_max = Iω_min
The moment of inertia (I) can be expressed as the product of the mass (m) and the square of the distance (r) from the object to the axis of rotation:
I = mr^2
Substituting this into the equation above, we get:
m(r^2)ω_max = m(r^2)ω_min
Canceling out the mass (m) and the square of the distance (r^2), we obtain:
ω_max = ω_min
This implies that the maximum and minimum angular speeds are equal, contradicting the given ratio n = ω_max / ω_min. Therefore, there must be an error in the question or the provided information.
To learn more about orbit -
brainly.com/question/30365878
#SPJ11
Analytically dete 5. A thin film of kerosene (index of refraction 1.20) floats on water (index of refraction 1.33). White light is incident near normal on the film. What wavelengths of visible light will yield maximum intensity upon after normal reflection.
The wavelengths of light that will yield maximum intensity upon normal reflection are 550 nm and 650 nm.
When white light is incident on the thin film of kerosene floating on water, some light is reflected and some is transmitted through the film.
For constructive interference to occur and maximize the reflected intensity, the path length difference between the reflected waves from the top and bottom surfaces of the film must be an integral multiple of the wavelength.
Using the formula for the path length difference, 2nt, where n is the refractive index and t is the thickness of the film, and assuming negligible phase change at the reflection, we can determine that for maximum intensity, the wavelengths satisfying 2nt = mλ (m is an integer) are approximately 550 nm and 650 nm in the visible light spectrum.
To learn more about Constructive interference
Click here brainly.com/question/31857527
#SPJ11
mass m, a 1. What is the minimum work needed to push a car, distance d up a ramp at an incline of ? 2. A projectile is fired at an upward angle of from the top of a cliff (height h) with a speed of v. What will be its speed when it strikes the ground below?
To calculate the minimum work needed to push a car up a ramp at an incline, minimum work is equal to the change in potential energy. Minimum Work = Change in Potential Energy. The speed of the projectile when it strikes the ground below will be equal to the final vertical velocity.
The change in potential energy is given by:
ΔPE = m * g * h
where m is the mass of the car, g is the acceleration due to gravity, and h is the vertical height or distance the car is pushed up the ramp.
When a projectile is fired at an upward angle from the top of a cliff with a speed v, the vertical motion and horizontal motion can be analyzed separately. The vertical motion is influenced by gravity, while the horizontal motion is not. The speed of the projectile when it strikes the ground below can be found by considering the vertical motion. The time taken for the projectile to reach the ground can be calculated using the equation: h = (1/2) * g * t^2
where h is the height of the cliff and g is the acceleration due to gravity. Rearranging the equation, we get:
t = sqrt((2 * h) / g)
Once we know the time, we can determine the final vertical velocity using:
v_f = g * t
Therefore, the speed of the projectile when it strikes the ground below will be equal to the final vertical velocity.
To learn more about, potential energy, click here, https://brainly.com/question/9349250
#SPJ11
A spherical mirror forms an inverted image 4.00 times larger than the size of the object. If the distance between the object and the image is 0.600 m, show that the mirror is both converging and has a focal length of 16.0 cm. Main Physics Concept: Given information: Gool/5: P=E/T Solution [with sketch or diagram, if applicable]:
In this scenario, a spherical mirror forms an inverted image that is 4.00 times larger than the size of the object.
The distance between the object and the image is given as 0.600 m. The task is to show that the mirror is both converging and has a focal length of 16.0 cm.
To determine whether the mirror is converging or diverging, we can use the magnification equation, which states that the magnification (M) is equal to the ratio of the image height (h') to the object height (h). In this case, the given magnification is 4.00, indicating that the image is larger than the object and inverted.
Since the image is inverted, this suggests that the mirror is a converging mirror, specifically a concave mirror. In a concave mirror, the focal length (f) is positive.
Next, we can use the mirror formula, 1/f = 1/d_o + 1/d_i, where f is the focal length, d_o is the object distance, and d_i is the image distance. The given object and image distances are 0.600 m. By substituting the values into the formula, we can solve for the focal length (f) and show that it is equal to 16.0 cm.
Learn more about spherical mirror here: brainly.com/question/16762350
#SPJ11
In the R-C Circuit experiment, at (t = 0) the switch is closed and the capacitor starts discharging. The voltage across the capacitor was recorded as a function of time according to the equation V=vies 9 8 7 6 5 Vc(volt) 4 3 2 1 0 10 20 30 10 50 t(min) From the graph, the time constant T in second) is 480
In the given RC circuit experiment, the switch is closed at t=0, and the capacitor starts discharging. The voltage across the capacitor has been recorded concerning time. The data for the voltage across the capacitor is given as follows:
V = Vies9 8 7 6 5
Vc (volt)4 3 2 1 0102030405060 t (min)
The time constant of the RC circuit can be calculated by the following formula:
T = R*C Where T is the time constant, R is the resistance of the circuit, and C is the capacitance of the circuit. As we know that the graph of the given data is an exponential decay curve, the formula for the voltage across the capacitor concerning time will be:
Vc = V0 * e^(-t/T)Where V0 is the initial voltage across the capacitor. We can calculate the value of the time constant T by using the given data. From the given graph, the voltage across the capacitor at t=480 seconds is 2 volts.
The formula will be:2 = V0 * e^(-480/T) Solving for T, we get:
T = -480 / ln(2)
≈ 693 seconds.
To know more about circuit visit:
https://brainly.com/question/12608516
#SPJ11
A 1 kg projectile is shot from the edge of the cliff 100 m above ground level with an initial speed of 100 m/s at an angle of 60°. a) At what time the projectile will reach the height of 20m above the cliff? b) How long it is in the air? c)Determine the horizontal distance traveled by the projectile (hint: not the range!) d)What is the velocity (magnitude and direction) of the projectile 3 seconds after it was shot?
Answer:
a.) The projectile will reach the height of 20m above the cliff after 0.4 seconds.
b.) The projectile will be in the air for 2 seconds.
c.) The horizontal distance traveled by the projectile is 100 meters.
d.) The velocity of the projectile 3 seconds after it was shot is 20.6 m/s. The direction of the velocity is 30° below the horizontal.
Explanation:
a) The time it takes for the projectile to reach a height of 20m above the cliff can be found using the following equation:
t = (20m - 100m) / (100m/s) * sin(60°)
t = 0.4 seconds
Therefore, the projectile will reach the height of 20m above the cliff after 0.4 seconds.
b) The time it takes for the projectile to reach the ground can be found using the following equation:
t = 2 * (100m) / (100m/s) * sin(60°)
t = 2 seconds
Therefore, the projectile will be in the air for 2 seconds.
c) The horizontal distance traveled by the projectile can be found using the following equation:
d = v * t * cos(θ)
where v is the initial velocity of the projectile, t is the time it takes for the projectile to travel the horizontal distance, and θ is the angle of projection.
v = 100 m/s
t = 2 seconds
θ = 60°
d = 100 m/s * 2 seconds * cos(60°)
d = 100 m/s * 2 seconds * 0.5
d = 100 meters
Therefore, the horizontal distance traveled by the projectile is 100 meters.
d.) The velocity of the projectile 3 seconds after it was shot can be found using the following equation:
v = v0 * cos(θ) - gt
where v is the final velocity of the projectile, v0 is the initial velocity of the projectile, θ is the angle of projection, and g is the acceleration due to gravity.
v0 = 100 m/s
θ = 60°
g = 9.8 m/s²
v = 100 m/s * cos(60°) - 9.8 m/s² * 3 seconds
v = 50 m/s - 29.4 m/s
v = 20.6 m/s
Therefore, the velocity of the projectile 3 seconds after it was shot is 20.6 m/s. The direction of the velocity is 30° below the horizontal.
Learn more about Projectile Motion.
https://brainly.com/question/33261303
#SPJ11
The real image of a tree is magnified -0.085 times by a telescope's primary mirror. If the tree's image forms 35 cm in front of the mirror, what is the distance between the mirror and the tree? What is the focal length of the mirror? What is the value for the mirror's radius of curvature? Is the image virtual or real? Is the image inverted or upright?
Given information: The real image of a tree is magnified -0.085 times by a
telescope's primary mirror
.
If the tree's image forms 35 cm in front of the mirror, what is the distance between the mirror and the tree? What is the focal length of the mirror? What is the value for the mirror's radius of curvature? Is the image virtual or real? Is the image inverted or upright?The negative magnification value indicates that the image formed is real and inverted.
The distance between the object and mirror can be calculated using the
magnification
formula:Magnification = - v/u=-0.085Given v = -35 cm. Substitute and solve for u.-0.085 = -35/u u = 411.76 cmTherefore, the distance between the mirror and the tree is 411.76 cm.The focal length of the mirror can be calculated using the formula:f = -v/m= 35/0.085 = 411.76 cm
Therefore, the focal
length
of the mirror is 411.76 cm.Using the mirror formula, the radius of curvature of the mirror can be calculated as:1/f = 1/v + 1/u=1/35 + (-0.085)/(-411.76) = 0.02857 cmThe radius of curvature of the mirror is 0.02857 cm.The image formed is real and inverted since the magnification value is negative.
to know more about
telescope's primary mirror
pls visit-
https://brainly.com/question/31460196
#SPJ11