6. ifmxkl=(8x - 6)° and the measure of major arc jml = (25x - 13), solve for the actual
measure of major arc jml. assume that lines which appear tangent are tangent.
k
ј,
l
m
a. 196°
b. 287°
c. 262°
d. 154°

Answer:

5x-9

Step-by-step explanation:

Distribute: 3x-(2x+9) + 4x

3x - 2x - 9 + 4x

Combine Like Terms: 3x - 2x - 9 + 4x

5x-9

If A large moving box has a volume of 45 cubic meters then two possible sets of dimensions for the box are: 1.5 m x 5 m x 9 m, and 1.5 m x 3 m x 15 m.

One possible way to approach this problem is to use trial and error. Therefore, two possible sets of dimensions for the box are 1.5 m x 5 m x 9 m, and 1.5 m x 3 m x 15 m.

We know that the volume of the box is 45 cubic meters and that the width is 1.5 meters. We want to find two whole numbers for the length and height that work.

We can start by listing the factors of 45: 1, 3, 5, 9, 15, and 45. We can then try each of these factors as the length or height, and see if the other dimension is a whole number greater than 2.

For example, if we try length = 5, then the height would need to be 9 to get a volume of 45. However, the width would be 1.5, which is already less than 2, so this doesn't work. These are the dimensions.

Trying again, if we try length = 9, then the height would need to be 5 to get a volume of 45. In this case, the width would be height = 5, which is greater than 2, so this is a possible answer.

Continuing, if we try length = 3, then the height would need to be 15 to get a volume of 45. This gives us a width of 1.5, which is less than 2, so this doesn't work.

Finally, if we try length = 15, then the height would need to be 3 to get a volume of 45. This gives us a width of height = 3, which is greater than 2, so this is another possible answer.

Therefore, two possible sets of dimensions for the box are: 1.5 m x 5 m x 9 m, and 1.5 m x 3 m x 15 m.

To learn more about “dimensions” refer to the https://brainly.com/question/19819849

#SPJ11

Tank B fills faster than Tank A, taking approximately 1.75 minutes to fill while Tank A takes approximately 1.14 minutes.

The problem presents two aquarium tanks, A and B, which are of the same size but have different water levels and fill rates. Tank A has 2 feet of water and is being filled at a rate of 2.2 inches per minute, while Tank B has 8 feet of water and is being filled at a faster rate of 5 inches per minute. The goal is to determine how long it will take to fill each tank.

To solve this problem, we need to use the formula: Time = Volume / Rate. We know that the volume of each tank is the same, so we can set up two equations:

For Tank A: Time = (2 feet * 12 inches/foot) / 2.2 inches/minute = 10.91 minutes or approximately 1.14 minutes.

For Tank B: Time = (8 feet * 12 inches/foot) / 5 inches/minute = 19.2 minutes or approximately 1.75 minutes.

Therefore, Tank A will take approximately 1.14 minutes to fill, while Tank B will take approximately 1.75 minutes to fill. It is important to note that Tank B is being filled at a faster rate than Tank A, despite having a greater volume of water.

Learn more about aquarium tanks

brainly.com/question/18597048

#SPJ11

To find dx dy, we need to take the derivative of y with respect to x. Using the chain rule, we have:

dy/dx = d(Vx)/dx = V * d(x)/dx + x * d(V)/dx

Since we are given y = Vx, we can substitute and simplify:

dy/dx = y/x * d(V)/dx + V

Now we can plug in the given values: y = 8, dt/dx = 1.75. We also need to find V:

y = Vx, so V = y/x = 8/x

Now we can substitute and simplify again:

dy/dx = 8/x * d(V)/dx + 8/x

We need to find d(V)/dx. We know that t = f(x,V), so we can use the chain rule again:

dt/dx = df/dx + df/dV * dV/dx

Since t and V are independent, df/dV = 0. So we have:

dt/dx = df/dx + 0 * dV/dx

dt/dx = df/dx

We also know that dt/dx = 1.75. Therefore:

1.75 = df/dx

Now we can find d(V)/dx:

d(V)/dx = d/dx (y/x) = (dy/dx * x - y * dx/dx) / x^2

Since y = 8, we have:

d(V)/dx = (dy/dx * x - 8) / x^2

Substituting what we know, we get:

d(V)/dx = (8/x * 1.75 - 8) / x^2 = 8(1.75 - x) / x^3

Now we can substitute everything into the formula we derived earlier:

dy/dx = 8/x * d(V)/dx + 8/x

dy/dx = 8/x * (8(1.75 - x) / x^3) + 8/x

Simplifying, we get:

dy/dx = 14/x^2 - 1.75

Therefore, when y = 8 and dt/dx = 1.75, dx/dy = 1/(dy/dx) is:

dx/dy = 1 / (14/x^2 - 1.75) = x^2 / (14 - 1.75x^2)
Given y = √x, we first need to find dy/dx, the derivative of y with respect to x. Using the power rule, we can rewrite y = x^(1/2), and the derivative will be:

dy/dx = (1/2)x^(-1/2)

Now, we are given that y = 8, so we need to find the corresponding value of x:

8 = √x
64 = x

Next, we are given dt/dx = 1.75. We need to find dt/dy, which can be calculated by taking the reciprocal of dy/dx:

dt/dy = 1 / (dy/dx)

Now, we substitute x = 64 into the derivative:

dy/dx = (1/2)(64)^(-1/2) = (1/2)(8)^(-1) = 1/16

Finally, we can find dt/dy by taking the reciprocal of dy/dx:

dt/dy = 1 / (1/16) = 16

So, the value of dt/dy when y = 8 and dt/dx = 1.75 is 16.

Visit here to learn more about chain rule brainly.com/question/28972262

#SPJ11

If x, y, and z represent three rational numbers, such that y is 512 times x and z is 50. 25 more than x and y = 15.5 , then value of z = 50.280.

Let x, y, and z represent three rational numbers, such that y is 512 times x and z is 50.25 more than x. If y = 15.5, the value of z can be found as follows:

Find the value of x.
Since y is 512 times x, we have the equation:
y = 512x
Substitute y with 15.5:
15.5 = 512x

Now, divide both sides by 512 to find x:
x = 15.5 / 512
x ≈ 0.0302734375

Find the value of z.
Since z is 50.25 more than x, we have the equation:
z = x + 50.25
Substitute x with the value we found (x = 0.0302734375):
z ≈ 0.0302734375 + 50.25
z ≈ 50.2802734375

So, the value of z is approximately 50.2802734375.

Learn more about Rational numbers:

https://brainly.com/question/19079438

#SPJ11

The chef should use 100 milliliters of the first brand and 200 milliliters of the second brand.

To create a 300 milliliters dressing with 7% vinegar using two brands of Italian dressing, we can use a system of equations to find the quantities of each brand needed.

Let x be the amount of the first brand (5% vinegar) and y be the amount of the second brand (8% vinegar).

First equation (total volume):
x + y = 300

Second equation (vinegar percentage):
0.05x + 0.08y = 0.07 * 300

Now, solve the system of equations:

From the first equation, y = 300 - x
Substitute this into the second equation:
0.05x + 0.08(300 - x) = 21

Expand and simplify:
0.05x + 24 - 0.08x = 21
0.03x = -3

Now, divide by 0.03:
x = 100

Now, find the value of y:
y = 300 - x = 300 - 100 = 200

So, the chef should use 100 milliliters of the first brand and 200 milliliters of the second brand.

To learn more about brand, refer below:

https://brainly.com/question/22068280

#SPJ11

Mark and Diane's property tax is $3,231.80.

To calculate the property tax for Mark and Diane, we need to multiply the assessed value of their home by the tax rate.

First, we need to convert the tax rate from mills to a decimal. One mill is equal to one-tenth of one cent or 0.001 dollars. Therefore, 43.7 mills is equal to 0.0437 dollars.

Next, we can calculate the property tax as follows:

Property tax = Assessed value × Tax rate

Property tax = $74,000 × 0.0437

Property tax = $3,231.80

Therefore, Mark and Diane's property tax is $3,231.80.

To know more about tax rate refer here:

https://brainly.com/question/12395856

#SPJ11

The area of the shaded region is the expression 16(4 - π) square metres.

The shaded region is the remaining area in the square which is outside the circle, so it is derived by subtracting the area of the circle from the area of the square as follows:

area of the square = 8 m × 8 m

area of the square = 64 m²

area of the circle = π × 4 m × 4 m

area of the circle = 16π m²

area of the shaded region = 64 m² - 16π m²

area of the shaded region = 16(4 - π) m²

Therefore, the area of the shaded region is the expression 16(4 - π) square metres.

Read more about area here:https://brainly.com/question/14137384

#SPJ1

Answer:

54

Step-by-step explanation:

9x 3 x2 =54

Therefore, the probability of the curious pattern occurring is 1/36.

Probability theory is an important branch of mathematics that is used to model and analyze random phenomena, such as the outcomes of games of chance, the behavior of particles in physics, or the performance of complex systems in engineering. It has many practical applications in fields such as statistics, finance, economics, and computer science.

Here,

The probability of rolling a number greater than 3 on a fair die is 3/6 = 1/2, since there are three numbers (4, 5, 6) that satisfy this condition out of the six possible outcomes.

Similarly, the probability of rolling a number greater than 4 on a fair die is 2/6 = 1/3, and the probability of rolling a number greater than 5 is 1/6.

Since each roll is independent, we can multiply these probabilities together to get the probability that all three conditions are satisfied:

P = (1/2) × (1/3) × (1/6)

= 1/36

To know more about probability,

https://brainly.com/question/30034780

#SPJ1

Answer:

Set your calculator to degree mode.

tan(37°) = x/8

x = 8tan(37°) = 6.03

For the given triangle the required value of the x is approximately 6.02 units.

Use the concept of triangle defined as:

A triangle is a three-sided polygon, which has three vertices and three angles which has a sum of 180 degrees.

In the given triangle:

One angle is 37°

Adjacent side = 8 cm

Perpendicular = x

Since we know that,

Tan θ = opposite/adjacent

Therefore,

Tan 37° = x/8

Since Tan 37° ≈ 0.753

Then, 0.753  ≈  x/8

x ≈ 6.02 units

Hence,

The required value of x is approximately 60.2 units.

To learn more about the triangle visit;

brainly.com/question/1058720

#SPJ4

The sequence of transformations the triangle XYZ have gone through to produce figure X'Y'Z' is: D. Rotation 90° counterclockwise, reflection across the y-axis.

Transformation is a method required to change the orientation, or resize a given object to produce its image. Some of the types of transformation are: rotation, reflection, dilation, and translation.

Rotation requires turning a given object about a point at a certain angle.

Reflection implies flipping an object over a line as a reference point.

Dilation deals with either increasing or decreasing the dimensions of a given object.

Translation involves moving an object in a specific direction and given number of units.

Considering triangle XYZ and the figure produced, we can conclude that:

The sequence of transformations the triangle XYZ have gone through to produce figure X'Y'Z' is: D. Rotation 90° counterclockwise, reflection across the y-axis.

Learn more about transformation at https://brainly.com/question/29715209

#SPJ1

The measurement of angle 2 is 55°, if the measurement of angle 1 and angle 2 equal 180° and measurement of angle 1 is 125° in the drawing of the bridge design.

The measurement of angle 1 is 125°, and the sum of angle 1 and angle 2 is 180°. The relationship between angle 1 and angle 2 is supplementary since their sum is equal to 180°. To find the measurement of angle 2,

Therefore, angle 2 has a measurement of 55°.

To learn about  measurement : https://brainly.com/question/777464

#SPJ11

The area enclosed by the circle is given as 7494.12 m² and the mistake Frank have made is he subtracted the area of the square and the area of 4 semi-circles.

We are given that the figure is made by attaching semicircles to each side of a 54 dash m​-by-54 dash m square. Frank says the area is 1 comma 662.12 m squared.

We have to find the error made by Frank,

Area of the square = Side of the square x Side of the square

In the question; the side of the square given is 54 m and this would also be the diameter of the semicircle attached to each side of a square.

So, the radius of the semicircle = diameter /2  = 54/2 = 27 m

Now, the area of the square = 54 x 54 = 2916 m².

Also, the area of the semi-circle = [tex]\frac{\pi r^2}{2}[/tex] = [tex]\frac{3.14*27^2}{2}[/tex] = 1144.53 m² .

As there are a total of 4 semi-circles attached to the square, so the area of all the 4 semi-circles = 4 x 1144.53  = 4578.12

Now, the total area of the figure = Area of the square + Area of 4 semi-circles

                = 2916 + 4578.12

                = 7494.12 m².

The error made by Frank was that he subtracted the area of the square and the area of 4 semi-circles to find the area of the whole figure as (4578.12  - 2916  = 1662.12 ).

Learn more about Area of enclosed circle:

https://brainly.com/question/17192142

#SPJ4

Complete question:

Frank needs to find the area enclosed by the figure. The figure is made by attaching semicircles to each side of a 54 m​-by-54 m square. Frank says the area is 1662.12 meter squared. Find the area enclosed by the figure. Use 3.14 for pi. What error might Frank have​ made?

The amount of magnesium sulfate produced from the given reaction cannot be determined solely from the energy absorbed by the reaction.

The given reaction is: Al2(SO4)3 + 3 MgI2 → 2 AlI3 + 3 Mg(SO4) and the enthalpy change for the reaction is ΔH = +722 kJ. The enthalpy change indicates that the reaction is endothermic, meaning that energy is absorbed by the reaction. The question asks about the amount of magnesium sulfate produced, which is not directly related to the energy absorbed by the reaction.

The balanced chemical equation shows that the reaction produces 3 moles of magnesium sulfate for every 3 moles of magnesium iodide consumed. Therefore, the amount of magnesium sulfate produced depends on the amount of magnesium iodide consumed.

To determine the amount of magnesium sulfate produced, we would need information about the amount of magnesium iodide consumed. The energy absorbed by the reaction does not provide enough information to determine the amount of magnesium sulfate produced.

In summary, the amount of magnesium sulfate produced from the given reaction cannot be determined solely from the energy absorbed by the reaction.

Learn more about Enthalpy

brainly.com/question/16720480

#SPJ11

There are 5 combinations with one flavor, 10 combinations with two flavors, and 10 combinations with three flavors, resulting in 25 possible combinations in total.

a. Only one flavor is there.

b. Buko can be paired with 4 other flavors and Ube can be paired with 3 remaining flavors.

c. 10 combinations of three flavors.

a. There is only one flavor: Since the box contains only one flavor, there are 5 possible combinations (Buko, Ube, Pineapple, Yema, and Mango).

b. There are two flavors:
- Buko can be paired with 4 other flavors (Ube, Pineapple, Yema, Mango).
- Ube can be paired with 3 remaining flavors (Pineapple, Yema, Mango).
- Pineapple can be paired with 2 remaining flavors (Yema, Mango).
- Yema can be paired with 1 remaining flavor (Mango).
In total, there are 10 combinations of two flavors.

c. There are three flavors:
- There are 5 flavors in total, and we want to choose 3. We can use the formula for combinations: C(n, k) = n! / (k!(n-k)!), where n is the total number of flavors and k is the number of flavors to choose.
- C(5, 3) = 5! / (3!(5-3)!) = 10 combinations of three flavors.

So, there are 5 combinations with one flavor, 10 combinations with two flavors, and 10 combinations with three flavors, resulting in 25 possible combinations in total.

To know more about combinations, refer to the link below:

https://brainly.com/question/20211959#

#SPJ11

The transformation that  verify that the two triangles f and c are similar are

Rotation: The first procedure is rotating triangle C with center art vertex (-9, 2) counterclockwise 90 degrees

Translation: In this case, the triangle is to the right 1 unit and 2 units up

Dilation: The dilation factor here is 2. Using the vertex of of the point which is (-8, 0) as the center, dilate with a scale factor of two

The transformations described moves triangle F to triangle C

Learn more about transformation at

https://brainly.com/question/4289712

#SPJ1

Answer:

[tex]3\sqrt{5}[/tex]

Step-by-step explanation:

Use the distance formula to determine the distance between the two points.

Distance = [tex]\sqrt{(1-4)^{2} + (4-(-2))^{2} }[/tex]

Simplify, and you get the answer.

[tex]3\sqrt{5}[/tex]

1) The maximum amount you should spend on rent is $840.

2) The maximum amount you should spend on rent is $570.

3) Your monthly income must be at least $2,733.33 to afford this apartment.

4) Your monthly income must be at least $3,000 to afford this apartment.

5) You need $1,980 to start renting the apartment.

1) With a monthly income of $2,800, the maximum amount you should spend on rent can be calculated using the 30% rule.
$2,800 x 0.30 = $840
So, the maximum amount you should spend on rent is $840.

2) With a monthly income of $1,900, the maximum amount you should spend on rent can be calculated using the 30% rule.
$1,900 x 0.30 = $570
So, the maximum amount you should spend on rent is $570.

3) To afford an apartment that rents for $820, your monthly income should be:
$820 ÷ 0.30 = $2,733.33
So, your monthly income must be at least $2,733.33 to afford this apartment.

4) To afford an apartment that rents for $900, your monthly income should be:
$900 ÷ 0.30 = $3,000
So, your monthly income must be at least $3,000 to afford this apartment.

5) To start renting an apartment that costs $665/month, you need the first and last month's rent, and a $650 security deposit.
First and last month's rent: $665 x 2 = $1,330
Total amount needed: $1,330 + $650 = $1,980
So, you need $1,980 to start renting the apartment.

Learn more about "monthly income": https://brainly.com/question/17151357

#SPJ11

If Ron were to borrow $4,500 at a simple interest rate of 7% per year, he would be charged $315 in interest each year.

Ron is seeking a loan with a simple interest rate of 7% per year, which means that he will be charged 7% of the loan amount as interest each year. Ron wants to borrow $4,500, so to calculate the amount of interest he will be charged each year, we can use the following formula:

Interest = Principal x Rate x Time

In this formula, "Principal" refers to the loan amount, "Rate" refers to the interest rate as a decimal (so 7% would be 0.07), and "Time" refers to the length of time the loan will be outstanding, typically measured in years.

Since Ron is seeking a loan with a simple interest rate, we can assume that the interest will be calculated on an annual basis. So if Ron wants to borrow $4,500 at a simple interest rate of 7% per year, the amount of interest he will be charged each year would be:

Interest = $4,500 x 0.07 x 1

Interest = $315

Therefore, if Ron were to borrow $4,500 at a simple interest rate of 7% per year, he would be charged $315 in interest each year. It's important to note that this calculation assumes that Ron will not be making any payments on the loan during the year, and that the interest will be added to the principal amount at the end of the year. In practice, many loans are structured differently and may involve monthly payments or other terms.

Learn more about interest rate

brainly.com/question/28236069

#SPJ11

The population density of manatees within a radius of 5 miles of a half circle off of Crystal Bay is approximately 14 manatees per square mile

The population density of manatees within a radius of 5 miles of a half circle off of Crystal Bay is approximately 70 manatees per square mile. To calculate this, we first need to find the area of the half circle. Using the formula for the area of a circle, A=πr^2, where r is the radius, we can find the area of the full circle with a radius of 5 miles:

A = 3.14 x 5^2
A = 78.5 square miles

Since we only want to consider the area of the half circle, we divide this by 2:

A = 78.5 / 2
A = 39.25 square miles

Now we can calculate the population density by dividing the number of manatees by the area:

Density = 550 / 39.25
Density ≈ 14

Therefore, the population density of manatees within a radius of 5 miles of a half circle off of Crystal Bay is approximately 14 manatees per square mile. Rounded to the nearest whole number, this is 14.

To learn more about Whole number

https://brainly.com/question/18071029

#SPJ11

The correct answer is option 2. Yes, the mean of the sample proportions is 0.6, which is the same as the population proportion.

To determine if the sample proportion is an unbiased estimator, we need to check if the mean of the sample proportions equals the population proportion. In this case, the population proportion of officers who are younger than 18 is given as 0.6. The sample proportions for all possible samples of size 2 are calculated and given in the table.
To calculate the mean of the sample proportions, we add up all the proportions in the table and divide by the total number of samples, which is 9.
Mean of sample proportions = (0 + 0.5 + 0.5 + 0.5 + 0.5 + 0.5 + 1 + 1 + 1) / 9 = 0.6
Since the mean of the sample proportions equals the population proportion, we can say that the sample proportion is an unbiased estimator.

Learn more about the unbiased estimator: https://brainly.com/question/22777338

#SPJ11

A fraction that is greater than 1/2 and less than 4/5, we need to consider fractions between these two values. A fraction that is greater than 1/2 and less than 4/5 is 6/10.

Compare the two given fractions by finding a common denominator.
The lowest common denominator for 1/2 and 4/5 is 10.
Convert both fractions to equivalent fractions with a denominator of 10.
1/2 = 5/10
4/5 = 8/10
Identify a fraction between 5/10 and 8/10.
One possible fraction between these two is 6/10.
A fraction that is greater than 1/2 and less than 4/5 is 6/10.

Read more about fractions.

https://brainly.com/question/31211004

#SPJ11

The Rounding to nearest hundredth, we get S₅ ≈ -12.25

The formula for a Riemann sum with n subintervals is:

[tex]S_n[/tex]= ∑ᵢ₌₁ⁿ f(cᵢ) Δx,

where Δx = (b - a)/n is the width of each subinterval and cᵢ is a point in the i-th subinterval. The value of cᵢ can be chosen arbitrarily, but here we are given specific values for c₁, c₂, c₃, c₄, and c₅.

In this problem, we have:

f(x) = 64 - x²

[a, b] = (-8, -3]

n = 5

Δx = (b - a)/n = (-3 - (-8))/5 = 1

Therefore, the width of each subinterval is 1.

The Riemann sum S₅ is:

S₅ = f(c₁) Δx + f(c₂) Δx + f(c₃) Δx + f(c₄) Δx + f(c₅) Δx

Substituting the given values for c₁, c₂, c₃, c₄, and c₅, we get:

S₅ = f(-7.5) + f(-6.5) + f(-5.5) + f(-4.5) + f(-3.5)

where f(x) = 64 - x².

Evaluating each term, we get:

f(-7.5) = 64 - (-7.5)² = 17.75

f(-6.5) = 64 - (-6.5)² = 5.75

f(-5.5) = 64 - (-5.5)² = -2.75

f(-4.5) = 64 - (-4.5)² = -12.25

f(-3.5) = 64 - (-3.5)² = -20.75

Therefore,

S₅ = 17.75(1) + 5.75(1) - 2.75(1) - 12.25(1) - 20.75(1) = -12.25.

Rounding to the nearest hundredth, we get S₅ ≈ -12.25.

Learn more about Riemann sum

brainly.com/question/30404402

#SPJ11

The ratio expressing the slope of line k is -2/3.

The ratio expressing the slope of k can be found by using the slope formula, which is: slope = (y₂ - y₁) / (x₂ - x₁), where (x₁, y₁) and (x₂, y₂) are the two given points on the line.

Plugging in the given values, we get:

slope = (-1 - 3) / (2 - (-4))

slope = -4 / 6

slope = -2/3

Therefore, the slope of the line passing through the two given points is -2/3.

To express this slope as a ratio, we can write it as:

-2:3

which means that for every decrease of 2 units in the y-coordinate, there is a corresponding decrease of 3 units in the x-coordinate.

This ratio can also be written as 2: -3 to indicate that for every increase of 2 units in the y-coordinate, there is a corresponding decrease of 3 units in the x-coordinate.

To know more about slope, refer here:

https://brainly.com/question/19131126#

#SPJ11

The ∠EBC and ∠FCD are corresponding angles.Option(C) is Crrect.

Corresponding angles are angles that are in matching or corresponding positions when two parallel lines are intersected by a transversal. In other words, corresponding angles are pairs of angles that occupy the same relative position at each intersection of a transversal and parallel lines.

More specifically, if two parallel lines, line AB and line CD, are intersected by a transversal, line EF, at point G, then the angles that are opposite each other (one on each line) are corresponding angles. The corresponding angles are denoted by the same letter or symbol.

So, ∠EBC and ∠FCD are corresponding angles.Option(C) is Correct.

To know more about Angles visit:

brainly.com/question/14569348

#SPJ1

Answer:

x = 30

Step-by-step explanation:

you can find it by vertical opposite angle which is their non adjecent angle are equal.

2x- 30 = 30

2x = 30 + 30 ..... take 30 to the left it change sighn

2x /2 = 60 / 2 ..... divided both side by 3

x = 30 ..... so the unknown no. is 30

Check the picture below.

[tex]52x=\cfrac{154-50x}{2}\implies 104x=154-50x\implies 154x=154\implies x=\cfrac{154}{154} \\\\\\ x=1\hspace{9em}\stackrel{ 50(1) }{\widehat{SU}=50^o}[/tex]