625 C passes through a flashlight in 0.460 h. the average current passing through the flashlight is approximately 0.377 A.
To calculate the average current, we need to use the formula:
Average Current (I) = Total Charge (Q) / Time (t)
In this case, we are given that a total charge of 625 C passes through the flashlight. The time is given as 0.460 hours.
First, we need to convert the time from hours to seconds since the unit of current is in amperes (A), which is defined as coulombs per second.
0.460 hours is equal to 0.460 x 60 x 60 = 1656 seconds.
Now we can calculate the average current:
I = 625 C / 1656 s
I ≈ 0.377 A
Therefore, the average current passing through the flashlight is approximately 0.377 A.
Average current is a measure of the rate at which charge flows through a circuit over a given time. In this case, the average current tells us how much charge, in coulombs, passes through the flashlight per second. It is an important parameter to consider when analyzing the behavior and performance of electrical devices.
Learn more about current here:
https://brainly.com/question/32059694
#SPJ11
Consider a circular sunspot, which has a temperature of 4000 K while the rest of the surface of the Sun has a temperature of 6000 K. a) What is the wavelength of maximum emission of the sunspot? HINT: This is once again an application of Wien's Law. It will tell us the "color" of the sunspot. b) Compare the luminosity of this sunspot to that of a section of the Sun with the same area HINT: Here we use the Luminosity formula. Remember to show all your work! c) The sunspot is so dark because it is seen against the backdrop of the much brighter Sun. Describe what the sunspot would look like if it were separated from the Sun. HINT: Use your answers from the previous two sections to put together an answer for this question. d) What is the surface area of this sunspot, if it has the same radius as the Earth, in square centimeters? What is the area of a light bulb whose filament is 2 cm in radius? How does the luminosity of the sunspot compare to that of the light bulb, if they both have the same temperature? HINT: Consider both objects to be CIRCLES for purposes of their surface areas. Again we use the Luminosity formula.
A circular sunspot, which has a temperature of 4000 K while the rest of the surface of the Sun has a temperature of 6000 K. (a)The wavelength of maximum emission of the sunspot is approximately 7.245 x 10^-7 meters.(b)The luminosity of the sunspot is approximately 0.346 times the luminosity of a section of the Sun with the same area.(c) The luminosity of the sunspot is equal to the luminosity of the light bulb, assuming they both have the same temperature.
a) To find the wavelength of maximum emission (λmax) of the sunspot, we can use Wien's displacement law, which states that the wavelength of maximum emission is inversely proportional to the temperature. The equation for Wien's law is:
λmax = (b / T)
Where:
λmax = wavelength of maximum emission
b = Wien's displacement constant (approximately 2.898 x 10^-3 m·K)
T = temperature in Kelvin
For the sunspot, T = 4000 K. Plugging this into the equation:
λmax = (2.898 x 10^-3 m·K) / (4000 K)
Calculating:
λmax ≈ 7.245 x 10^-7 m
Therefore, the wavelength of maximum emission of the sunspot is approximately 7.245 x 10^-7 meters.
b) To compare the luminosity of the sunspot to a section of the Sun with the same area, we need to use the luminosity formula:
L = σ × A × T^4
Where:
L = luminosity
σ = Stefan-Boltzmann constant (approximately 5.67 x 10^-8 W/(m^2·K^4))
A = surface area
T = temperature in Kelvin
Let's assume the area of the sunspot is A1 and the area of the section of the Sun is A2 (both have the same area). The luminosity of the sunspot (L1) is given by:
L1 = σ × A1 × T1^4
And the luminosity of the section of the Sun (L2) is given by:
L2 = σ × A2 × T2^4
Since the two areas are the same, A1 = A2. We can compare the luminosity ratio:
L1 / L2 = (σ × A1 × T1^4) / (σ × A2 × T2^4)
Canceling out the common terms:
L1 / L2 = (T1^4) / (T2^4)
Substituting the temperatures:
T1 = 4000 K (sunspot temperature)
T2 = 6000 K (rest of the Sun's surface temperature)
Calculating:
L1 / L2 = (4000 K)^4 / (6000 K)^4
L1 / L2 ≈ 0.346
Therefore, the luminosity of the sunspot is approximately 0.346 times the luminosity of a section of the Sun with the same area.
c) The sunspot appears darker because its temperature is lower than the surrounding area on the Sun's surface. Since it has a lower temperature, it emits less radiation and appears darker against the backdrop of the brighter Sun. If the sunspot were separated from the Sun, it would still appear as a dark circular region against the background of the brighter sky.
d) The surface area of the sunspot, assuming it has the same radius as the Earth, can be calculated using the formula for the surface area of a sphere:
A = 4πr^2
Where:
A = surface area
r = radius
Let's assume the radius of the sunspot is R (equal to the radius of the Earth), so the surface area (A1) is given by:
A1 = 4πR^2
For the light bulb, with a filament radius of 2 cm, the surface area (A2) is given by:
A2 = 4π(2 cm)^2
To compare the luminosity of the sunspot and the light bulb, we can use the same luminosity ratio as before:
L1 / L2 = (T1^4) / (T2^4)
Since both objects have the same temperature, T1 = T2. Therefore:
L1 / L2 = (T1^4) / (T1^4)
L1 / L2 = 1
Therefore, the luminosity of the sunspot is equal to the luminosity of the light bulb, assuming they both have the same temperature.
To learn more about Wien's displacement law visit: https://brainly.com/question/31780394
#SPJ11
The component of the external magnetic field along the central axis of a 46 turn circular coil of radius 16.0 cm decreases from 2.40 T to 0.100 T in 1.80 s. If the resistance of the coil is R=6.00Ω, what is the magnitude of the induced current in the coil? magnitude: What is the direction of the current if the axial component of the field points away from the viewer? clockwise counter-clockwise
the direction of the induced current in the coil is clockwise. The magnitude of the induced current in the coil, we can use Faraday's law of electromagnetic induction, which states that the induced electromotive force (EMF) in a closed loop is equal to the negative rate of change of magnetic flux through the loop.
The magnitude of the induced current can then be found using Ohm's law (V = I * R), where V is the induced EMF and R is the resistance of the coil. First, let's calculate the change in magnetic flux through the coil. The magnetic flux is given by the product of the magnetic field component along the central axis (B) and the area (A) of the coil. Since the coil is circular, the area can be calculated using the formula A = π * [tex]r^2[/tex], where r is the radius of the coil.
Initial flux, Φ_i =[tex]B_i[/tex]* A = (2.40 T) * (π * ([tex]0.16 m)^2)[/tex]
Final flux, Φ_f = [tex]B_f[/tex] * A = (0.100 T) * (π * ([tex]0.16 m)^2)[/tex]
The change in flux, ΔΦ = Φ_f - Φ_i
Next, we need to calculate the rate of change of flux, which is equal to the change in flux divided by the time interval:
Rate of change of flux, ΔΦ/Δt = (ΔΦ) / (1.80 s)
Now, we can calculate the induced EMF using Faraday's law:
Induced EMF, V = -(ΔΦ/Δt)
Finally, we can use Ohm's law to calculate the magnitude of the induced current:
Magnitude of induced current, I = V / R
Let's plug in the given values and calculate:
Initial flux, Φ_i = (2.40 T) * (π * ([tex]0.16 m)^2[/tex]) = 0.768π [tex]T·m^2[/tex]
Final flux, Φ_f = (0.100 T) * (π * ([tex]0.16 m)^2[/tex]) = 0.0256π T·[tex]m^2[/tex]
Change in flux, ΔΦ = Φ_f - Φ_i = (0.0256π - 0.768π) T·[tex]m^2[/tex]= -0.7424π T·[tex]m^2[/tex]
Rate of change of flux, ΔΦ/Δt = (-0.7424π T·[tex]m^2[/tex]) / (1.80 s) ≈ -1.297π T·[tex]m^2[/tex]
Induced EMF, V = -(ΔΦ/Δt) ≈ 1.297π T·[tex]m^2/s[/tex]
Magnitude of induced current, I = V / R ≈ (1.297π T·[tex]m^2/s[/tex]/ (6.00 Ω) ≈ 0.683π A
Therefore, the magnitude of the induced current in the coil is approximately 0.683π Amperes.
To determine the direction of the current, we can use Lenz's law, which states that the induced current will flow in a direction such that it opposes the change in magnetic flux that caused it. Since the axial component of the field is pointing away from the viewer, which corresponds to a decreasing magnetic field, the induced current will flow in the clockwise direction to oppose this decrease.
So, the direction of the induced current in the coil is clockwise.
Learn more about induction here:
https://brainly.com/question/29981117
#SPJ11
A separate excited motor with PN 18kW UN 220V, IN-94A, n№=1000rpm, Ra=0.150, calculate: (a) Rated electromagnetic torque TN (b) No-load torque To (c) Theoretically no-load speed no (d) Practical no-load speed no (e) Direct start current Istart
(a) The value of the rated electromagnetic torque TN is 0.17 N.m.
(b) The value of the No-load torque is 3.29 N.m.
(c) The value of the theoretically no-load speed is 411.8 V.
(d) The value of the practical no-load speed is 410.8 V.
(e) The value of the direct start current, is 470 A.
What is the value of Rated electromagnetic torque TN?(a) The value of the rated electromagnetic torque TN is calculated as follows;
TN = (PN × 60) / (2π × Nn)
where;
PN is the rated power = 18 kW.Nn is the rated speed = 1000 rpmTN = ( 18 x 60 ) / (2π x 1000 )
TN = 0.17 N.m
(b) The value of the No-load torque is calculated as;
To = (UN × IN) / (2π × Nn)
where;
IN is the rated current = 94AUN is the rated voltage = 220VTo = (UN × IN) / (2π × Nn)
To = (220 x 94 ) / ((2π x 1000 )
To = 3.29 N.m
(c) The value of the theoretically no-load speed is calculated as;
no = (UN - (Ra × IN)) / K
where;
Ra is the armature resistance = 0.15 ΩK is a constant = 0.5, assumed.no = ( 220 - (0.15 x 94) / (0.5)
no = 411.8 V
(d) The value of the practical no-load speed is calculated as;
no = (UN - (Ra × IN) - (To × Ra)) / K
no = (220 - (0.15 x 94) - (3.29 x 0.15) ) / 0.5
no = 410.8 V
(e) The value of the direct start current, is calculated as;
Istart = 5 × IN
Istart = 5 x 94 A
Istart = 470 A
Learn more about No-load torque here: https://brainly.com/question/31324009
#SPJ4
Select one correct answer from the available options in the below parts. a) You shine monochromatic light of wavelength ⋀ through a narrow slit of width b = ⋀ and onto a screen that is very far away from the slit. What do you observe on the screen? A. Two bright fringes and three dark fringes B. one bright band C. A series of bright and dark fringes with the central bright fringe being wider and brighter than the other bright fringes D. A series of bright and dark fringes that are of equal widths b) What does it mean for two light waves to be in phase ? A. The two waves reach their maximum value at the same time and their minimum value at the same time B. The two waves have the same amplitude C. The two waves propagate in the same direction D. The two waves have the same wavelength and frequency
a) The correct answer is C. A series of bright and dark fringes with the central bright fringe being wider and brighter than the other bright fringes.
b) The correct answer is A. The two waves reach their maximum value at the same time and their minimum value at the same time.
The brilliant middle fringe is a result of light's beneficial interference. The two light sources (slits) are symmetrically closest to the centre fringe as well. As one walks out from the core, the fringes continue to progressively become darker and the central fringe is the brightest.
To know more about central bright fringe
https://brainly.com/question/30880851
#SPJ11
What is the total translational kinetic energy of the gas in a room filled with nitrogen at a pressure of 1.00 atm and a temperature of 20.7°C? The dimensions of the room are 4.60 m ´ 5.20 m ´ 8.80 m. Boltzmann constant = 1.38 × 10⁻²³ J/K, R = 8.314 J/mol ∙ K, and NA = 6.02 × 10²³ molecules/mol. (1 atm = 1.013 ´ 10⁵ Pa)
The total translational kinetic energy of the gas in the room filled with nitrogen at the given conditions is indeed 1.71 x 10⁶ J.
The total translational kinetic energy of the gas in a room filled with nitrogen at a pressure of 1.00 atm and a temperature of 20.7°C (T = 293.85 K) can be determined as follows:
1. Calculate the volume of the room. The volume of the room is given as 4.60 m x 5.20 m x 8.80 m = 204.416 m3.
2. Convert the pressure from atm to Pa. 1 atm = 1.013 x 10⁵ Pa. Thus, the pressure is 1.00 atm x 1.013 x 10⁵ Pa/atm = 1.013 x 10⁵ Pa.
3. Determine the number of moles of nitrogen gas in the room.
PV = nRT,
In the given context, the variables used in the gas law equation are defined as follows: P represents the pressure, V stands for the volume, n denotes the number of moles, R is the gas constant, and T represents the temperature measured in Kelvin.
n = PV/RT
n = (1.013 x 105 Pa) x (204.416 m3) / [(8.314 J/mol K) x (293.85 K)]
n = 847.57 mol
4. Determine the mass of nitrogen gas in the room. Nitrogen gas has a molar mass of 28.0134 grams per mole.
m = n x mm = 847.57 mol x 28.0134 g/mol = 23,707.1 g = 23.7 kg
5. Calculate the mean translational kinetic energy of a nitrogen molecule.
The average translational kinetic energy of a gas molecule is given by KE = (3/2)kT, where k is the Boltzmann constant.
KE = (3/2)kT
KE = (3/2)(1.38 x 10⁻²³ J/K)(293.85 K)
KE = 6.21 x 10⁻²¹ J
6. Determine the total translational kinetic energy of the nitrogen gas in the room.The total translational kinetic energy of the nitrogen gas in the room is given by:
KEtotal = (1/2)mv2
KEtotal = (1/2)(23.7 kg)(N/v)2N/v = √((2KEtotal)/m) = √((2 x 6.21 x 10-21 J)/(28.0134 x 10-3 kg/mol x NA)) = 492.74 m/s
KEtotal = (1/2)(23.7 kg)(492.74 m/s)2
KEtotal = 1.71 x 10⁶ J
Therefore, the total translational kinetic energy of the gas in the room filled with nitrogen at a pressure of 1.00 atm and a temperature of 20.7°C is 1.71 x 10⁶ J.
Learn more about kinetic energy at: https://brainly.com/question/8101588
#SPJ11
Question \| 1: What is weather? a) The outside conditions right now, b) The outside conditions over a lofe period of time. c) A tool to measure the outside weather conditions.
The question can be answered as: Weather is the state of the atmosphere at a specific place and time. It refers to the current conditions such as temperature, humidity, wind, precipitation, and air pressure
Weather refers to the condition of the atmosphere at a given place and time, especially as it relates to temperature, precipitation, and other features like cloudiness, humidity, wind, and air pressure. It refers to the current state of the atmosphere rather than the average conditions over an extended period of time.Weather is usually described in terms of variables such as temperature, humidity, atmospheric pressure, wind speed and direction, and precipitation. Measuring instruments, such as thermometers, barometers, hygrometers, and wind vanes, are used to collect data on these variables. They help in predicting, reporting, and analyzing weather patterns.
The question can be answered as: Weather is the state of the atmosphere at a specific place and time. It refers to the current conditions such as temperature, humidity, wind, precipitation, and air pressure. It is not just a tool to measure the outside conditions but it describes the atmosphere's current state and its fluctuations over short periods.
Learn more about Weather :
https://brainly.com/question/32601421
#SPJ11
Water is pumped up to a water tower, which is 92.0m high. The flow rate up to the top of the tower is 75.0 L/s and each liter of water has a mass of 1.00 kg. What power is required to keep up this flow rate to the tower? (pls explain steps!)
The power required is 66.09 kW for maintaining a flow rate of 75.0 L/s to a water tower that stands 92.0m high, the steps for calculation will be explained.
The power required to maintain the flow rate to the water tower can be determined by considering the amount of work needed to lift the water against gravity.
First, we need to find the mass of water being pumped per second. Since each litre of water has a mass of 1.00 kg, the mass of water per second would be:
75.0 kg/s (75.0 L/s * 1.00 kg/L).
Next, calculate the work done to lift the water. The work done is given by the formula:
W = mgh,
where m is the mass, g is the acceleration due to gravity (approximately 9.8 m/s²), and h is the height of the tower.
Plugging in the values,
[tex]W = (75.0 kg/s) * (9.8 m/s^2) * (92.0 m)[/tex]
= 66,090 J/s (or 66.09 kW).
Therefore, the power required to maintain the flow rate of 75.0 L/s to the tower is approximately 66.09 kW. This power is needed to overcome the gravitational force and lift the water to the height of the tower.
Learn more about gravitational force here:
https://brainly.com/question/32609171
#SPJ11
a 2.0 kg book sits on a table. a) the net vertical force on the book is
two light bulbs are connected separately across two 20 -V batteries as shown in the figure. Bulb A is rated as 20W, 20V and bulb B rates at 60W, 20V
A- which bulb has larger resistance
B which bulb will consume 1000 J of energy in shortest time
A) bulb A has a larger resistance than bulb B. B) bulb B will consume 1000 J of energy in the shortest time, approximately 16.67 seconds.
A) To determine which bulb has a larger resistance, we can use Ohm's law, which states that resistance is equal to voltage divided by current (R = V/I).
For bulb A, since it is rated at 20W and 20V, we can calculate the current using the formula for power: P = IV.
20W = 20V * I
I = 1A
For bulb B, since it is rated at 60W and 20V, the current can be calculated as:
60W = 20V * I
I = 3A
Now we can compare the resistances of the bulbs using Ohm's law:
For bulb A, R = 20V / 1A = 20 ohms
For bulb B, R = 20V / 3A ≈ 6.67 ohms
Therefore, bulb A has a larger resistance than bulb B.
B) To determine which bulb will consume 1000 J of energy in the shortest time, we can use the formula for electrical energy:
Energy = Power * Time
For bulb A, since it consumes 20W, we can rearrange the formula to solve for time:
Time = Energy / Power = 1000 J / 20W = 50 seconds
For bulb B, since it consumes 60W, the time can be calculated as:
Time = Energy / Power = 1000 J / 60W ≈ 16.67 seconds
Therefore, bulb B will consume 1000 J of energy in the shortest time, approximately 16.67 seconds.
Learn more about resistance
https://brainly.com/question/30691700
#SPJ11
A 22.0 kg child is riding a playground merry-go-round that is rotating at 40.0 rev/min. What net centripetal force must she exert to stay on if she is 1.64 m from its center? (Hint: it's more than double her weight). Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23,-2, 106, 5.23e-8 Enter answer here
A 22.0 kg child is riding a playground merry-go-round that is rotating at 40.0 rev/min. The net centripetal force the child must exert to stay on the merry-go-round is 603.56 N.
The centripetal force is the radial force responsible for keeping an object in circular motion
To find the net centripetal force the child must exert to stay on the merry-go-round, we can use the formula for centripetal force:
F = m * ω^2 * r
where F is the centripetal force, m is the mass of the child, ω is the angular velocity in radians per second, and r is the distance from the center of rotation.
First, we need to convert the angular velocity from rev/min to radians per second.
There are 2π radians in one revolution, and 60 seconds in one minute:
ω = (40.0 rev/min) * (2π rad/rev) * (1 min/60 s) = 4.1888 rad/s
Now we can calculate the centripetal force:
F = (22.0 kg) * (4.1888 rad/s)^2 * (1.64 m) = 603.56 N
Therefore, the net centripetal force the child must exert to stay on the merry-go-round is 603.56 N.
Learn more about centripetal force here:
https://brainly.com/question/14021112
#SPJ11
Carla stands on a train platform while two trains, traveling the same speed (v = 9.0 and sounding whistles of the same frequency, approach from the same direction. After one train passes Carla but before the second train passes her, she hears a beat frequency of 8.5 Hz. What is the frequency of the train whistle? f= Hz
The frequency of the train whistle is 150 Hz.How to find the frequency of the train whistle?Given that two trains, traveling the same speed (v = 9.0 and sounding whistles of the same frequency, approach from the same direction. After one train passes Carla but before the second train passes her, she hears a beat frequency of 8.5 Hz.The beat frequency formula is given by;Beat frequency = (f1 - f2)Here, f1 and f2 are the frequencies of the whistles of the two trains.The velocity of sound in the air is 343 m/s (at 20°C).
The time difference between the whistles heard by Carla can be found using;Δt = d/vHere, d is the distance traveled by the first train after passing Carla and before the second train reaches Carla.As both trains are moving at the same speed v, the distance covered by the first train and second train after hearing the first train can be expressed as;Distance covered by first train (d1) = v * ΔtDistance covered by second train (d2) = 2 * d1Total distance traveled by the second train after the first train passed Carla = d1 + d2.
The total distance traveled by the second train can also be written as;Total distance traveled by the second train = λbeatWhere λbeat is the wavelength of the beat frequency.The frequency of the beat frequency is given as 8.5 Hz.So the wavelength of the beat frequency is;λbeat = v/ fbeat = 343/8.5 = 40.35 mNow, distance traveled by the first train can be found as;d1 = v * Δt = v * λbeat/2 = 151.575 mTotal distance traveled by the second train can be found as;d1 + d2 = 2 * d1 = 303.15 mThe total distance traveled by the second train is equal to the distance of one wavelength of the beat frequency plus the distance traveled by the first train. Since both trains travel at the same speed, this distance is also equal to one wavelength of the sound waves emitted by the train whistle.So, λtrain = 303.15 m.
The frequency of the train whistle is;f = v/λtrain= 9/λtrain= 9/303.15= 0.02965 HzFrequency in Hz = 0.02965 * 5000= 150 HzTherefore, the frequency of the train whistle is 150 Hz.
Learn more on frequency here:
brainly.in/question/39348621
#SPJ11
With the sinusoidal voltage source shown, what is the rms current of this circuit? (select closest ans With the sinusoidal voltage source shown, what is the rms current of this circuit? (select closest answer 10 A 13 A 14 A 19 A 21 A
The closest answer to the rms current of the circuit is 14 A.
The rms current of the given circuit can be calculated by using the following formula:`Irms = Vrms / R`where `Vrms` is the rms voltage across the resistor `R`.Here, the rms voltage can be calculated using the given peak voltage. As the waveform is a sinusoid, the rms voltage can be calculated by dividing the peak voltage by √2.So, `Vrms = Vp / √2 = 100 / √2 = 70.7 V`.Now, we can find the rms current by using the formula: `Irms = Vrms / R = 70.7 / 5 = 14.14 A`.Therefore, the closest answer to the rms current of the circuit is 14 A.
Learn more about voltage here,
https://brainly.com/question/27861305
#SPJ11
What is the potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute?
The potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute is 3000 volts.
A capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute will have a potential difference of 3000 V between the plates.What is a capacitor?Capacitors are electronic devices that can store an electric charge temporarily. The unit of capacitance is the farad (F). It can be calculated by dividing the charge stored in one plate by the potential difference between the two plates.C=Q/VPotential Difference between plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minuteIn this case, we have to determine the potential difference between the plates of the capacitor.
The energy stored in the capacitor can be computed by the formula:Energy stored in a capacitor E = 1/2CV²Where,C is the capacitanceV is the potential difference between the platesE is the energy stored in the capacitorWe can rearrange the formula to obtain the potential difference between the plates of the capacitor as:V = √(2E/C)Watts is a unit of power. To calculate the energy in watt-hours, we must convert 75.0 W to watt-hours by multiplying by time, which is 1 minute (60 seconds).
Watt-hours = Power x Time = 75.0 x 1/60 = 1.25 WhTo calculate the energy in joules, we need to convert watt-hours to joules.1 Wh = 3.6 x 10^3 J1.25 Wh = 1.25 x 3.6 x 10^3 J = 4.5 x 10^3 JSubstitute the values of capacitance and energy into the formula above to get the potential difference between the plates of the capacitor.V = √(2E/C) = √(2 × 4.5 × 10³ / 3) = 3000 voltsTherefore, the potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute is 3000 volts.
Learn more about Energy here,what is the definition of energy
https://brainly.com/question/2003548
#SPJ11
A long cylinder having a diameter of 2 cm is maintained at 600 °C and has an emissivity of 0.4. Surrounding the cylinder is another long, thin-walled concentric cylinder having a diameter of 6 cm and an emissivity of 0.2 on both the inside and outside surfaces. The assembly is located in a large room having a temperature of 27 °C. Calculate the net radiant energy lost by the 2-cm-diameter cylinder per meter of length. Also calculate the temperature of the 6-cm- diameter cylinder
The net radiant energy lost by the 2-cm-diameter cylinder per meter of length is X Joules. The temperature of the 6-cm-diameter cylinder is Y °C.
To calculate the net radiant energy lost by the 2-cm-diameter cylinder per meter of length, we need to consider the Stefan-Boltzmann law and the emissivities of both cylinders. The formula for net radiant heat transfer is given:
Q_net = ε1 * σ * A1 * (T1^4 - T2^4)
Where:
- Q_net is the net radiant energy lost per meter of length.
- ε1 is the emissivity of the 2-cm-diameter cylinder.
- σ is the Stefan-Boltzmann constant (5.67 x 10^-8 W/(m^2·K^4)).
- A1 is the surface area of the 2-cm-diameter cylinder.
- T1 is the temperature of the 2-cm-diameter cylinder.
- T2 is the temperature of the surroundings (27 °C).
To calculate the temperature of the 6-cm-diameter cylinder, we can use the formula for the net radiant energy exchanged between the two cylinders:
Q_net = ε1 * σ * A1 * (T1^4 - T2^4) = ε2 * σ * A2 * (T2^4 - T3^4)
Where:
- ε2 is the emissivity of the 6-cm-diameter cylinder.
- A2 is the surface area of the 6-cm-diameter cylinder.
- T3 is the temperature of the 6-cm-diameter cylinder.
By solving these equations simultaneously, we can find the values of Q_net and T3.
To know more about radiant energy click here:
https://brainly.com/question/31870099
#SPJ11
A long cylinder having a diameter of 2 cm is maintained at 600 °C and has an emissivity of 0.4. Surrounding the cylinder is another long, thin-walled concentric cylinder having a diameter of 6 cm and an emissivity of 0.2 on both the inside and outside surfaces. The assembly is located in a large room having a temperature of 27 °C. Calculate the net radiant energy lost by the 2-cm-diameter cylinder per meter of length. Also, calculate the temperature of the 6-cm-diameter cylinder
A current loop having area A=4.0m^2 is moving in a non-uniform magnetic field as shown. In 5.0s it moves from an area having magnetic field magnitude Bi=0.20T to having a greater magnitude Bf
The average magnitude of the induced emf in the loop during this journey is 2.0 V
Find Bf
The magnetic field magnitude, Bf, is 2.5 T.
Given,A current loop having area A=4.0m² is moving in a non-uniform magnetic field as shown. In 5.0s it moves from an area having magnetic field magnitude Bi=0.20T to having a greater magnitude Bf. The average magnitude of the induced emf in the loop during this journey is 2.0 V. We have to find Bf.
The formula for the average magnitude of the induced emf in the loop is:
Average magnitude of induced emf = ΔΦ/ΔtHere, the change in magnetic flux is given by,ΔΦ = Bf × A - Bi × A= (Bf - Bi) × A
Also, time duration of the journey, Δt = 5.0 s
Therefore, the above formula can be rewritten as,2 = (Bf - 0.20) × 4.0/5.0
Simplifying the above equation for Bf, we get,Bf = (2 × 5.0/4.0) + 0.20= 2.5 V
The magnetic field magnitude, Bf, is 2.5 T.
The answer is, Bf = 2.5T
Know more about magnetic field here,
https://brainly.com/question/14848188
#SPJ11
The value of current in a 73- mH inductor as a function of time is: I=7t 2
−5t+13 where I is in amperes and t is in seconds. Find the magnitude of the induced emf at t=6 s. Write your answer as the magnitude of the emf in volts. Question 7 1 pts The circuit shows an R-L circuit in which a battery, switch, inductor and resistor are in series. The values are: resistor =52Ω, inductor is 284mH, battery is 20 V. Calculate the time after connecting the switch after which the current will reach 42% of its maximum value. Write your answer in millseconds.
Part 1: The magnitude of the induced emf at t = 6 seconds is 5.767 V.
Part 2: The time after connecting the switch after which the current will reach 42% of its maximum value is 8.9 ms.
Part 1 :
The current as a function of time is given by, I = 7t²−5t+13
Given, t = 6 secondsTherefore, the current at t = 6 seconds is, I = 7(6)² - 5(6) + 13I = 264 A
Therefore, the magnitude of the induced emf is given by,ε = L(dI/dt)At t = 6 seconds, I = 264
Therefore, dI/dt = 14t - 5Therefore, dI/dt at t = 6 seconds is, dI/dt = 14(6) - 5dI/dt = 79
The inductance L = 73 mH = 0.073 H
Therefore, the magnitude of the induced emf at t = 6 seconds is,ε = L(dI/dt)ε = 0.073(79)ε = 5.767 V
Therefore, the magnitude of the induced emf at t = 6 seconds is 5.767 V.
Part 2:
Given, resistor = 52 Ωinductor, L = 284 mH = 0.284 Hbattery, V = 20 VWhen the switch is closed, the inductor starts to charge, and the current increases with time until it reaches a maximum value.
Let this current be I_max.
After closing the switch, the current at any time t is given by, I = (V/R) (1 - e^(-Rt/L))
Where V is the battery voltage, R is the resistance of the resistor, L is the inductance and e is the base of the natural logarithm.
The maximum current that can flow in the circuit is given by, I_max = V/RTherefore, I/I_max = (1 - e^(-Rt/L))
So, when I/I_max = 0.42 (42% of its maximum value), e^(-Rt/L) = 0.58
Taking natural logarithm on both sides, we get,-Rt/L = ln(0.58)t = (-L/R) ln(0.58)t = (-0.284/52) ln(0.58)t = 0.0089 s = 8.9 ms
Therefore, the time after connecting the switch after which the current will reach 42% of its maximum value is 8.9 ms.
To learn about magnitude here:
https://brainly.com/question/30337362
#SPJ11
A skier has mass m = 80kg and moves down a ski slope with inclination 0 = 4° with an initial velocity of vo = 26 m/s. The coeffcient of kinetic friction is μ = 0.1. ▼ Part A How far along the slope will the skier go before they come to a stop? Ax = —| ΑΣΦ ? m
The skier will go approximately 33.47 meters along the slope before coming to a stop.
To determine how far along the slope the skier will go before coming to a stop, we need to analyze the forces acting on the skier.
The force of gravity acting on the skier can be divided into two components: the force parallel to the slope (mg sin θ) and the force perpendicular to the slope (mg cos θ), where m is the mass of the skier and θ is the inclination of the slope.
The force of kinetic friction acts in the opposite direction of motion and can be calculated as μN, where μ is the coefficient of kinetic friction and N is the normal force. The normal force can be calculated as mg cos θ.
Since the skier comes to a stop, the net force acting on the skier is zero. Therefore, we can set up the following equation:
mg sin θ - μN = 0
Substituting the expressions for N and mg cos θ, we have:
mg sin θ - μ(mg cos θ) = 0
Simplifying the equation:
mg(sin θ - μ cos θ) = 0
Now we can solve for the distance along the slope (x) that the skier will go before coming to a stop.
The equation for the distance is given by:
x = (v₀²) / (2μg)
where v₀ is the initial velocity of the skier and g is the acceleration due to gravity.
Given:
m = 80 kg (mass of the skier)
θ = 4° (inclination of the slope)
v₀ = 26 m/s (initial velocity of the skier)
μ = 0.1 (coefficient of kinetic friction)
g ≈ 9.8 m/s² (acceleration due to gravity)
Substituting the values into the equation:
x = (v₀²) / (2μg)
x = (26²) / (2 * 0.1 * 9.8)
x ≈ 33.47 meters
To know more about kinetic friction
https://brainly.com/question/30886698
#SPJ11
Tuning fork A has a frequency of 440 Hz. When A and a second tuning fork B are struck simultaneously, 7 beats per second are heard. When a small mass is added to one of the tines of B, the two forks struck simultaneously produce 9 beats per second. The original frequency of tuning fork B was A) 447 Hz B) 456 Hz C) 472 Hz D) 433 Hz E) 424 Hz
Tuning fork A has a frequency of 440 Hz. When A and a second tuning fork B are struck simultaneously, 7 beats per second are heard. The beat frequency between two tuning forks is equal to the difference in their frequencies. the original frequency of tuning fork B is 433 Hz (option D).
Let's assume the original frequency of tuning fork B is fB. When the two tuning forks are struck simultaneously, 7 beats per second are heard. This means the beat frequency is 7 Hz. So, the difference between the frequencies of the two forks is 7 Hz:
|fA - fB| = 7 Hz
Now, when a small mass is added to one of the tines of tuning fork B, the beat frequency becomes 9 Hz. This implies that the new frequency difference between the forks is 9 Hz:
|fA - (fB + Δf)| = 9 Hz
Subtracting the two equations, we get:
|fB + Δf - fB| = 9 Hz - 7 Hz
|Δf| = 2 Hz
Since Δf represents the change in frequency caused by adding the mass, we know that Δf = fB - fB_original.
Substituting the values, we have:
|fB - fB_original| = 2 Hz
Now, we need to examine the answer choices to find the original frequency of tuning fork B. Looking at the options, we can see that D) 433 Hz satisfies the equation:
|fB - 433 Hz| = 2 Hz
Therefore, the original frequency of tuning fork B is 433 Hz (option D).
Learn more about tuning fork here:
https://brainly.com/question/30442128
#SPJ11
A photon with a frequency of 10 ∧
15 Hz has a wavelength of and an energy of 100 nm;3×10 ∧
23 J 300 nm;3×10 ∧
23 J 100 nm;6.6×10 ∧
−19 J 300 nm;6.6×10 ∧
−19 J
The answer is 300 nm;6.6×10 ∧−19J. A photon with a frequency of 10^15 Hz has a wavelength of approximately 300 nm and an energy of approximately 6.6 x 10^-19 J.
The relationship between the frequency (f), wavelength (λ), and energy (E) of a photon is given by the equation:
E = hf
where h is Planck's constant (h ≈ 6.626 x 10^-34 J·s).
To calculate the wavelength of the photon, we can use the formula:
λ = c / f
where c is the speed of light (c ≈ 3 x 10^8 m/s).
Given the frequency of the photon as 10^15 Hz, we can substitute the values into the formula:
λ = (3 x 10^8 m/s) / (10^15 Hz)
= 3 x 10^-7 m
= 300 nm
To calculate the energy of the photon, we can use the equation E = hf.
Given the frequency of the photon as 10^15 Hz and the value of Planck's constant, we can substitute the values into the equation:
E = (6.626 x 10^-34 J·s) * (10^15 Hz)
= 6.626 x 10^-19 J
Therefore, a photon with a frequency of 10^15 Hz has a wavelength of approximately 300 nm and an energy of approximately 6.6 x 10^-19 J.
Learn more about wavelength here:
https://brainly.com/question/19922131
#SPJ11
Flying Circus of Physics In basketball, hang is an illusion in which a player seems to weaken the gravitational acceleration while in midair. The illusion depends much on a skilled player's ability to rapidly shift the ball between hands during the flight, but it might also be supported by the longer horizontal distance the player travels in the upper part of the jump than in the lower part. If a player jumps with an initial speed of No-7.50 m/s at an angle of 80-37.0, what percent of the jump's range does the player spend in the upper half of the jump (between maximum height and half-maximum height)?
The player spends approximately 79% of the jump's range in the upper half (between maximum height and half-maximum height) of the jump.
To determine the percentage of the jump's range spent in the upper half, we need to analyze the motion of the player. We can break down the motion into horizontal and vertical components. The initial speed of the jump is given as 7.50 m/s, and the angle is 37.0 degrees.
First, we calculate the time taken to reach the maximum height of the jump. The time to reach maximum height can be determined using the vertical component of the initial velocity and the acceleration due to gravity. The vertical component is given by No * sin(θ), where No is the initial speed and θ is the angle. The time to reach maximum height is then t = (No * sin(θ)) / g, where g is the acceleration due to gravity.
Next, we calculate the time taken to reach half-maximum height. Since the vertical motion is symmetrical, the time taken to reach half-maximum height is half of the time taken to reach maximum height, which is t/2.
Now, we can calculate the horizontal distance traveled in the upper half of the jump. The horizontal distance can be determined using the horizontal component of the initial velocity and the time taken to reach half-maximum height. The horizontal component is given by No * cos(θ), and the distance is then d = (No * cos(θ)) * (t/2).
Finally, we calculate the total horizontal distance of the jump by using the total time of flight, which is twice the time taken to reach maximum height. The total horizontal distance is given by d_total = (No * cos(θ)) * (2 * t).
The percentage of the jump's range spent in the upper half can be calculated as (d / d_total) * 100. Substituting the values, we find (d / d_total) * 100 ≈ 79%.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds? Answer 14. A stroboscope is set to flash every 9.00×10 −5
s. What is the frequency of the flashes? Answer 15. When an 90.0-kg man stands on a pogo stick, the spring is compressed 0.150 m. What is the force constant of the spring? Answer 16. What is the period of a 1.00−m-long pendulum?
The period of the 1.00-meter-long pendulum is approximately 2.01 seconds. The period represents the time it takes for the pendulum to complete one full swing, moving back and forth from one extreme to the other.
The period of a pendulum is the time it takes to complete one full swing. For a 1.00-meter-long pendulum, the period can be calculated using the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
To find the period of a pendulum, we can use the formula T = 2π√(L/g), where T represents the period, L is the length of the pendulum, and g is the acceleration due to gravity. In this case, we have a 1.00-meter-long pendulum. The acceleration due to gravity on Earth is approximately 9.8 m/s². Plugging these values into the formula, we get:
T = 2π√(1.00/9.8)
≈ 2π√(0.102)
≈ 2π × 0.320
≈ 2.01 seconds
Therefore, the period of the 1.00-meter-long pendulum is approximately 2.01 seconds. The period represents the time it takes for the pendulum to complete one full swing, moving back and forth from one extreme to the other. This value is influenced by the length of the pendulum and the acceleration due to gravity, and it remains constant as long as these factors remain unchanged.
Learn more about period of a pendulum:
https://brainly.com/question/29702798
#SPJ11
how to calibrate the refractometer ? (NO PICTURE )
A refractometer is an optical instrument used to measure the refractive index of a substance. Calibration is essential to ensure the instrument is measuring accurately. Below are the steps to calibrate a refractometer:Step 1: Zero Calibration. Fill the prism dish with distilled water, and allow it to come to the room temperature.
Hold the refractometer in such a way that it receives light through the prism. Now, adjust the prism's focus until you see a clear dividing line. Place two or three drops of distilled water on the prism surface, and let it spread out to cover the whole prism. Close the cover plate and wait for a few seconds for the reading to stabilize. If the reading is not zero, adjust the zero adjustment screw.Step 2: Calibration with StandardsChoose a suitable reference material and make sure it has a refractive index close to the substance being measured. Clean the prism surface, add a drop of the reference material, and allow it to spread. Take the reading, and it should match with the reference values. If not, adjust the calibration screw on the side of the refractometer until the reading matches the reference value.Step 3: RinseClean the prism surface with distilled water, and wipe it dry with a clean cloth. It is essential to remove all the traces of reference material before measuring any other substance. If the instrument is not in use for a long time, it is better to clean the prism with a mixture of alcohol and distilled water.
To know more about calibrate visit:
https://brainly.com/question/3520695
#SPJ11
Jeff of the Jungle swings on a 7.6-m vine that initially makes an angle of 42 ∘
with the vertical. Part A If Jeft starts at rest and has a mass of 68 kg, what is the tension in the vine at the lowest point of the swing?
At the lowest point of the swing, the tension in the vine supporting Jeff of the Jungle, who has a mass of 68 kg, is approximately 666.4 Newtons.
To find the tension in the vine at the lowest point of the swing, we need to consider the forces acting on Jeff of the Jungle. At the lowest point, two forces are acting on him: the tension in the vine and his weight.
The weight of Jeff can be calculated using the formula W = mg, where m is the mass of Jeff (68 kg) and g is the acceleration due to gravity (approximately 9.8 m/s²). Therefore, W = 68 kg × 9.8 m/s² = 666.4 Newtons.
Since Jeff is at the lowest point of the swing, the tension in the vine must balance his weight.
Learn more about tension here:
https://brainly.com/question/29763438
#SPJ11
To simultaneously measure the current in a resistor and the voltage across the resistor, you must place an ammeter in ________ with the resistor and a voltmeter in _________ with the resistor. A) Series, series B) Series, parallel C) Parallel, series D) Parallel, parallel
To simultaneously measure the current in a resistor and the voltage across the resistor, you need to place an ammeter in series with the resistor and a voltmeter in parallel with the resistor.
Ammeters are devices used to measure the current flowing through a circuit. They are connected in series with the component or portion of the circuit for which the current is being measured. Placing the ammeter in series with the resistor allows it to measure the current passing through the resistor accurately.
Voltmeters, on the other hand, are used to measure the voltage across a component or portion of a circuit. They are connected in parallel with the component for which the voltage is being measured. Connecting the voltmeter in parallel with the resistor enables it to measure the voltage across the resistor accurately.
Therefore, the correct answer is:
A) Series, parallel
By placing the ammeter in series with the resistor and the voltmeter in parallel with the resistor, you can measure both the current and voltage simultaneously.
Learn more about ammeter and voltmeter https://brainly.com/question/1511135
#SPJ11
Find the magnitude of the magnetic field at the center of a 45 turn circular coil with radius 16.1 cm, when a current of 3.47 A flows in it. magnitude:
The magnitude of the magnetic field at the center of a 45 turn circular coil with radius 16.1 cm is approximately 4.83 × 10^-5 Tesla.
To find the magnitude of the magnetic field at the center of a circular coil, we can use the formula for the magnetic field inside a coil:
B = (μ₀ * N * I) / (2 * R)
where B is the magnetic field, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), N is the number of turns in the coil, I is the current flowing through the coil, and R is the radius of the coil.
In this case, the coil has 45 turns, a radius of 16.1 cm (or 0.161 m), and a current of 3.47 A.
Plugging in the values into the formula, we have:
B = (4π × 10^-7 T·m/A) * (45) * (3.47 A) / (2 * 0.161 m)
Simplifying the equation, we find:
B ≈ 4.83 × 10^-5 T
Therefore, the magnitude of the magnetic field at the center of the coil is approximately 4.83 × 10^-5 Tesla.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11
A circular loop of wire with a radius 7.932 cm is placed in a magnetic field such that it induces an EMF of 3.9 V in the cir- cular wire loop. If the cross-sectional diame- ter of the wire is 0.329 mm, and the wire is made of a material which has a resistivity of 1.5 × 10⁻⁶ Nm, how much power is dissipated in the wire loop? Answer in units of W.
Radius of the circular loop, r = 7.932 cm Cross-sectional diameter of the wire, d = 0.329 mm Resistivity of the material, ρ = 1.5 × 10⁻⁶ Nm EMF induced in the circular wire loop, E = 3.9 V
We can find out the current in the circular loop of wire using the formula,
EMF = I × R where I is the current flowing through the wire and R is the resistance of the wire. R = ρl / A Diameter of the wire, d = 0.329 mm Radius of the wire, r' = 0.329 / 2 = 0.1645 mm Area of cross-section of the wire, A = πr'² = π(0.1645 × 10⁻³ m)² = 2.133 × 10⁻⁷ m² Length of the wire, l = 2πr = 2π(7.932 × 10⁻² m) = 0.4986 m
Resistance of the wire, R = (1.5 × 10⁻⁶ Nm × 0.4986 m) / 2.133 × 10⁻⁷ m² = 35.108 ΩI = E / R = 3.9 V / 35.108 Ω = 0.111 A
The magnetic field, B = E / A = 3.9 V / 2.133 × 10⁻⁷ m² = 1.829 × 10⁴ T
Power, P = I²R = (0.111 A)² × 35.108 Ω = 0.0436 W
Therefore, the power dissipated in the wire loop is 0.0436 W.
Learn more here: https://brainly.com/question/13160823
#SPJ11
The Sidereal day is
-different than the Solar day due to the fact that the Earth revolves around the Sun.
-different than the Solar day due to the fact that the Earth has a nearly circular orbit.
-different than the Solar day due to the fact that the Earth is tilted on its axis.
-different than the Solar day due to the fact that the stars’ light takes many years–sometimes billions of years–to reach Earth.
The Sidereal day is different than the Solar day due to the fact that the Earth revolves around the Sun.
The period it takes for a planet to complete one rotation about its axis, as measured against the stars, is known as a sidereal day. In general, the length of a sidereal day varies depending on the planet's rotation speed. A sidereal day on Earth, for example, is around 23 hours, 56 minutes, and 4 seconds long. The sidereal day is different from the solar day due to the fact that the Earth revolves around the Sun. The period it takes for a planet to complete one rotation about its axis, as measured against the Sun, is known as a solar day. The length of a solar day on Earth is around 24 hours long.
Since the Earth's rotation rate varies throughout the year due to its elliptical orbit around the Sun, a solar day is not exactly 24 hours long every day of the year. However, its average length over the course of a year is roughly 24 hours. The difference between a sidereal and solar day is that the Earth rotates on its axis in the same direction as it orbits the Sun, resulting in a small difference in its position each day. As a result, the Earth must rotate slightly more than one full turn for the Sun to return to the same apparent position in the sky.
The sidereal day is the time it takes for the Earth to complete one full rotation about its axis with respect to the stars.
Learn more about elliptical orbit here:
brainly.com/question/13800169
#SPJ11
When both focii of an ellipse are located at exactly the same position, then the eccentricity of must be: a) 0.5 b) 0.75 c) 0
d) 0.25
e) 1.0
When both foci of an ellipse coincide at the same position, the eccentricity of the ellipse is 0, and it becomes a circle. The answer is (c) 0.
When both foci of an ellipse are located at exactly the same position, the eccentricity of the ellipse must be 0. An ellipse is a set of points whose distance from two fixed points (foci) sum to a fixed value. The distance between the foci is the major axis length, and the distance between the vertices is the minor axis length. The formula for an ellipse is (x−h)2/a2+(y−k)2/b2=1.
The distance between the foci is 2c, which is always less than the length of the major axis. The relationship between the semi-major axis a and semi-minor axis b of an ellipse is given by a2−b2=c2. An ellipse's eccentricity is defined as the ratio of the distance between the foci to the length of the major axis, with e=c/a. When the two foci coincide at the same position, the eccentricity of the ellipse is 0, and the ellipse becomes a circle.
The answer is (c) 0.
Learn more about eccentricity of the ellipse
https://brainly.com/question/8047982
#SPJ11
The potential difference between the accelerator plates of a television is 25 kV. If the distance between the plates is 1.5 cm, find the magnitude of the uniform electric field in the region of the plates.
The magnitude of the uniform electric field in the region of the plates is 1666666.67 V/m.
Given potential difference is 25kV = 25 x 10^3 V and distance between the plates is 1.5 cm = 1.5 x 10^-2 m. The electric field between the plates is uniform. Hence we can apply the following formula: Electric field (E) = Potential difference (V) / distance between the plates (d)Substituting the given values, we get: E = V/d = 25 x 10^3 / 1.5 x 10^-2 = 1666666.67 V/m.
Learn more about the electric field:
https://brainly.com/question/19878202
#SPJ11
An electromagnetic wave is traveling in the +z-direction. Its electric field vector is given by Ē(x, t) = î 9.00 * 105 N/C cos (230 rad x - 150 rad t). Write the magnetic field vector B(x, t) in the same way. m S
The magnetic field vector B(x, t) associated with the given electric field vector is given by B(x, t) = ĵ (3.93 * [tex]10^{-3}[/tex] T) cos(230 rad x - 150 rad t).
According to electromagnetic wave theory, the electric field vector (Ē) and magnetic field vector (B) in an electromagnetic wave are mutually perpendicular and oscillate in a synchronized manner. The relationship between these vectors is determined by Maxwell's equations.
In this case, the electric field vector is given as Ē(x, t) = î (9.00 * [tex]10^{5}[/tex]N/C) cos(230 rad x - 150 rad t), where î represents the unit vector in the x-direction. To determine the magnetic field vector B(x, t), we can use the relationship between the electric and magnetic fields in an electromagnetic wave.
The magnetic field vector B(x, t) can be written as B(x, t) = (1/c) ĵ (Ē/ω), where ĵ represents the unit vector in the y-direction, c is the speed of light in vacuum, Ē is the electric field vector, and ω is the angular frequency of the wave.
In this case, the angular frequency is given as 150 rad/s. Therefore, the magnetic field vector becomes B(x, t) = ĵ (3.93 * [tex]10^{-3}[/tex] T) cos(230 rad x - 150 rad t), where T represents Tesla as the unit of magnetic field strength.
This expression represents the magnetic field vector associated with the given electric field vector in the electromagnetic wave traveling in the +z-direction.
Learn more about electromagnetic wave here ;
https://brainly.com/question/29774932
#SPJ11