7. Nitrogen has occupies 46 L of space at 26°C. The temperature is increased
to 75°C. What volume does the gas occupy after the temperature has
increased?

The relationship between pH and the hydroxide ion (OH-) concentration can be described by the pH scale, which is a measure of the acidity or basicity of a solution.

The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral (indicating the presence of equal concentrations of H+ and OH- ions), pH values below 7 indicate acidity (indicating the presence of higher concentrations of H+ ions than OH- ions), and pH values above 7 indicate basicity (indicating the presence of higher concentrations of OH- ions than H+ ions).

Mathematically, the relationship between pH and the hydroxide ion concentration can be expressed as:

pH = -log [OH-]

where [OH-] represents the concentration of hydroxide ions in moles per liter (M).

So, as the pH increases (i.e. becomes more basic), the hydroxide ion concentration also increases, and as the pH decreases (i.e. becomes more acidic), the hydroxide ion concentration decreases.

To know more about ion click here

brainly.com/question/14982375

#SPJ4

The activation energy for the reverse reaction of A(g) + B(g) <=> C(g) + D(g) can be determined using the given forward activation energy (20 kJ) and the enthalpy change of the reaction (30 kJ).

The activation energy for the reverse reaction can be calculated using the formula:

Ea(reverse) = Ea(forward) + ΔH

Where Ea(reverse) is the activation energy for the reverse reaction, Ea(forward) is the activation energy for the forward reaction (20 kJ), and ΔH is the enthalpy change of the reaction (30 kJ).

By plugging the values into the formula, we get

Ea(reverse) = 20 kJ + 30 kJ

Ea(reverse) = 50 kJ

So, the activation energy for the reverse reaction is 50 kJ. This means that to break the bonds in C and D and form A and B, 50 kJ of energy is required. In general, activation energy is the minimum amount of energy required for a chemical reaction to occur. In this case, the forward reaction has a lower activation energy (20 kJ), which means it is easier to form C and D from A and B compared to the reverse reaction.

Know more about activation energy here:

https://brainly.com/question/10507976

#SPJ11      

The molar mass of P2O5 is 142 grams per mole. This means that if we have one mole of P2O5, it will weigh 142 grams. Similarly, if we have 0.5 moles of P2O5, it will weigh 0.5 x 142 = 71 grams.

The molar mass of a compound is the mass of one mole of that compound. It is expressed in grams per mole. The molar mass is calculated by adding up the atomic masses of all the atoms in the compound.

In the case of P2O5, we have two phosphorus atoms and five oxygen atoms. The atomic mass of phosphorus is 31, which means that each phosphorus atom contributes 31 units of mass to the compound. The atomic mass of oxygen is 16, which means that each oxygen atom contributes 16 units of mass to the compound.

To calculate the molar mass of P2O5, we need to add up the mass contributed by each atom:

Molar mass of P2O5 = 2 x atomic mass of P + 5 x atomic mass of O

Molar mass of P2O5 = 2 x 31 + 5 x 16

Molar mass of P2O5 = 62 + 80

Molar mass of P2O5 = 142 g/mol.

Learn more about molar mass here:

https://brainly.com/question/30216315

#SPJ1

The element defined by the following information: p = 20 n° = 20 e- = 20 is argon. The correct answer is option b.

An atom is the smallest constituent unit of ordinary matter that has the chemical properties of an element. An atom consists of a central nucleus, which is made up of protons and neutrons, as well as electrons that orbit the nucleus.

Every electron in an atom has a negative charge, and protons, which are situated in the nucleus, have a positive charge. A neutrally charged atom has the same number of protons as it does electrons. The atomic number is the number of protons in the nucleus of an atom.

The number of electrons in a neutral atom is the same as the number of protons. For instance, if an element has an atomic number of 6, it indicates that the nucleus of each atom contains six protons. All atoms of the same element have the same atomic number.

Argon is a chemical element with the symbol Ar and atomic number 18. It is the third most abundant gas in the Earth's atmosphere, accounting for 0.934 percent of the atmosphere's volume.

Argon is colorless, odorless, and tasteless, and it is used in a variety of applications such as welding and lighting. Argon's atomic number is 18, indicating that it has 18 protons in its nucleus.

Argon has 18 electrons orbiting the nucleus, with the same number of electrons as protons. Argon is a member of the noble gas group, which is a group of elements that have eight electrons in their outermost electron shell.

The correct answer is option b.

To know more about argon refer to-

brainly.com/question/133359#

#SPJ11

1.432 x 10^6 g of Fluoride contains 2.90 x 10^25 atoms.

Every element is made up of atoms, and its chemical and physical properties are determined by the number and arrangement of these atoms. The mass of an atom is usually measured in atomic mass units (amu). One atomic mass unit is equal to 1.66 x 10^-24 grams.

In order to determine the number of atoms in a given mass, we must first convert the mass to atomic mass units. We can then use Avogadro's number, which is 6.022 x 10^23 particles per mole, to calculate the number of atoms.

In this case, 1.432 x 10^6 grams of Fluoride would convert to 8.668 x 10^23 atomic mass units. Using Avogadro's number, we can calculate that this mass of Fluoride contains 2.90 x 10^25 atoms.

Learn more about atoms here:

https://brainly.com/question/17545314

#SPJ1

Answer:

well u can see clearly that C got the most bonds

Based on the identity of the components present in the unknown sample and their properties, make an educated guess as to the identity of sample B.

In general, however, the steps involved in calculating Rf values and identifying unknown components in chromatography would be as follows:

Run the chromatography experiment using a known set of standards and the unknown sample.

Develop the chromatogram by visualizing the spots using UV light, ninhydrin spray, iodine vapor, or other suitable methods.

Mark the center of each spot with a pencil or other suitable marking tool.

Measure the distance traveled by each spot from the origin to the center of the spot (known as the "spot distance") and the distance traveled by the solvent front (known as the "solvent distance").

Calculate the Rf value of each spot using the formula Rf = spot distance / solvent distance.

Compare the Rf values of the unknown sample to those of the known standards and literature values to identify the components present in the sample.

For more questions on Rf values

https://brainly.com/question/17751879

#SPJ11

The enthalpy change for the combustion of 6.00 g of table sugar is -268,228 kJ/mol.

The enthalpy change for the combustion of one mole of table sugar (C12H22O11) can be calculated using the standard enthalpies of the formation of the reactants and products.

The balanced chemical equation for the combustion of table sugar is:

C12H22O11(s) + 12 O2(g) → 12 CO2(g) + 11 H2O(l)

The standard enthalpies of formation of C12H22O11(s), CO2(g), and H2O(l) are -1274.9 kJ/mol, -393.5 kJ/mol, and -285.8 kJ/mol, respectively. The standard enthalpy of the formation of O2(g) is 0 kJ/mol.

To calculate the enthalpy change for the combustion of 6.00 g of table sugar, we need to convert the mass to moles:

moles of C12H22O11 = 6.00 g / 342.3 g/mol = 0.0175 mol

Using the stoichiometric coefficients in the balanced equation, we can determine that 12 moles of O2 are required to completely react with 1 mole of C12H22O11. Therefore, the number of moles of O2 required to react with 0.0175 mol of C12H22O11 is:

moles of O2 = 12 × 0.0175 mol = 0.21 mol

The enthalpy change for the combustion of 0.21 mol of O2 can be calculated using the standard enthalpies of formation:

ΔH = (12 × -393.5 kJ/mol) + (11 × -285.8 kJ/mol) - (-1274.9 kJ/mol) + (0 kJ/mol)

ΔH = -4694.4 kJ/mol

To calculate the enthalpy change for the combustion of 6.00 g of table sugar, we need to divide by the number of moles of C12H22O11:

ΔH = -4694.4 kJ/mol / 0.0175 mol

ΔH = -268,228 kJ/mol

Find out more about  enthalpy change

brainly.com/question/2378537

#SPJ4

The kinetic/thermal energy of one mole of CO2 molecules at 37°C is 99.0 kJ.

Thermal energy is the energy that comes from the temperature of an object or its surroundings. It is a form of energy that is released by a substance as a result of its temperature increasing. Thermal energy is the sum of the kinetic and potential energy of the particles that make up a substance.

Kinetic energy is the energy possessed by an object as a result of its motion. It is calculated using the formula KE = 1/2mv2, where m is the mass of the object and v is its velocity. The kinetic energy of an object increases as its velocity or mass increases.

The thermal energy of one mole of CO2 molecules at 37°C can be calculated using the formula: E = nRT, where E is the thermal energy, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

The gas constant R is equal to 8.314 J/mol K.

Converting 37°C to Kelvin, we get: T = 37 + 273 = 310 K

Substituting the values into the formula, we get:E = nRT= (1 mol)(8.314 J/mol K)(310 K)= 2574.94 J/mol

Converting J/mol to kJ/mol, we get:2574.94 J/mol / 1000 = 2.57 kJ/mol

Therefore, the thermal energy of one mole of CO2 molecules at 37°C is 2.57 kJ/mol.

The kinetic energy of one mole of CO2 molecules at 37°C can be calculated using the formula KE = 3/2nRT, where n, R, and T have the same values as before.

Substituting the values into the formula, we get:KE = 3/2nRT= (3/2)(1 mol)(8.314 J/mol K)(310 K)= 3860.41 J/mol

Converting J/mol to kJ/mol, we get:3860.41 J/mol / 1000 = 3.86 kJ/molTherefore, the kinetic energy of one mole of CO2 molecules at 37°C is 3.86 kJ/mol.

To know more about thermal energy refer to-

brainly.com/question/18989562#
#SPJ11

The salt produced by the neutralization of hydrobromic acid (HBr) with magnesium hydroxide (Mg(OH)₂) is magnesium bromide (MgBr₂).

During a neutralization reaction, an acid and a base react to form a salt and water. In this case, hydrobromic acid is the acid, and magnesium hydroxide is the base. The balanced chemical equation for this reaction is:

HBr + Mg(OH)₂ → MgBr₂ + 2H₂O

In this equation, the H+ ions from hydrobromic acid and the OH- ions from magnesium hydroxide combine to form water (H₂O), while the Mg²+ ions from magnesium hydroxide and the Br- ions from hydrobromic acid combine to form magnesium bromide (MgBr₂).

To determine the correct formula for the resulting salt, it is essential to consider the charges of the ions involved. Magnesium (Mg) has a charge of +2, and bromide (Br) has a charge of -1. To form a neutral compound, the charges must balance, which is why the formula for magnesium bromide is MgBr₂, with two bromide ions to balance the +2 charge of magnesium.

Thus, the correct answer from the given choices is MgBr₂, magnesium bromide.

Know more about magnesium bromide here :

brainly.com/question/29324548

#SPJ11

Answer:

1,495.11 L volume of air will be required for the complete combustion of octane vapors of 25 L.

The equilibrium conversion of ethylene to ethanol is:

x = 0.581 or 58.1% (rounded to one decimal place)

The balanced chemical reaction is as follows:

C2H4 + H2O → C2H5OH

The stoichiometric coefficient of ethylene is 1, and the stoichiometric coefficient of water is 1.

The stoichiometric coefficient of ethanol is also

1.b)The mole fraction of ethylene is given by (1-x)/6.

The mole fraction of steam is given by (5-3x)/6.

The mole fraction of ethanol is given by x/6.c)The expression for the equilibrium constant, K is given by the following formula:

K = yethanol / (yethylene * ywater)

K = (x/6) / [(1-x)/6 * (5-x)/6]

K = x / [(1-x) * (5-x)]d)

The equilibrium conversion of ethylene to ethanol is given by the following formula:x = K / (1+K)At the given conditions of 523.15 K and 35 bars, the value of K is 1.389. Therefore, the equilibrium conversion of ethylene to ethanol is:

x = 1.389 / (1+1.389)

x = 0.581 or 58.1% (rounded to one decimal place)

To learn more about: Equilibrium :

https://brainly.com/question/19340344

#SPJ11

In this task, we calculated the amount of energy required to perform various temperature-related changes to 2 kg of water, such as heating ice, melting ice, heating water, vaporizing water, and heating steam.

These calculations required us to use specific heat capacity and latent heat values for water.

i. To heat 2 kg of ice from -5°C to 0°C, we need to add energy to raise its temperature to the melting point of ice, while keeping it in the solid phase. The specific heat capacity of ice is 2.1 J/(g°C). So, for 2 kg of ice, the total energy required would be:

Energy = mass x specific heat capacity x change in temperature

Energy = 2,000 g x 2.1 J/(g°C) x (0°C - (-5°C))

Energy = 21,000 J

ii. To melt 2 kg of ice at 0°C, we need to add energy to overcome the latent heat of fusion, which is 334 J/g for water. So, for 2 kg of ice, the total energy required would be:

Energy = mass x latent heat of fusion

Energy = 2,000 g x 334 J/g

Energy = 668,000 J

iii. To heat 2 kg of water from 0°C to 100°C, we need to add energy to raise its temperature to the boiling point of water, while keeping it in the liquid phase. The specific heat capacity of water is 4.18 J/(g°C). So, for 2 kg of water, the total energy required would be:

Energy = mass x specific heat capacity x change in temperature

Energy = 2,000 g x 4.18 J/(g°C) x (100°C - 0°C)

Energy = 836,000 J

iv. To vaporize 2 kg of water at 100°C, we need to add energy to overcome the latent heat of vaporization, which is 2,260 J/g for water. So, for 2 kg of water, the total energy required would be:

Energy = mass x latent heat of vaporization

Energy = 2,000 g x 2,260 J/g

Energy = 4,520,000 J

v. To heat 2 kg of steam from 100°C to 115°C, we need to add energy to raise its temperature while keeping it in the gaseous phase. The specific heat capacity of steam is 1.84 J/(g°C). So, for 2 kg of steam, the total energy required would be:

Energy = mass x specific heat capacity x change in temperature

Energy = 2,000 g x 1.84 J/(g°C) x (115°C - 100°C)

Energy = 55,200 J

Learn more about latent heat of vaporization here:

https://brainly.com/question/30762921

#SPJ1

Ether acetate would be a suitable solution for the experiment based on the solubility of sodium borohydride and the mysterious aldehydes/ketones.

It is necessary to decrease unidentified aldehydes/ketones with sodium borohydride while submerging the reactants and products.

An unnamed ketone or aldehyde is reduced using sodium borohydride. The resulting alcohol (RCH2OH/R2CHOH), sodium borate (NaBO2), and hydrogen gas are produced when the unknown aldehyde or ketone (RCHO/R2CO) reacts with sodium borohydride (NaBH4). (H2).

Ethyl acetate would be a better solvent overall for the experiment because it would make the reactants and products more soluble.

Learn more about Ether acetate:
https://brainly.com/question/30434200

#SPJ4

If the graduated cylinder is not rinsed after transferring the sodium carbonate solution to the beaker, it can introduce a source of error into the experiment.

When a solution is transferred from one container to another, a small amount of the solution can remain in the container and stick to the walls or bottom of the container. This is known as residual solution or carryover, and it can affect the concentration of the solution being transferred.

In the case of transferring sodium carbonate solution to a beaker, any residual solution left in the graduated cylinder can affect the concentration of the sodium carbonate solution in the beaker. This can lead to inaccurate measurements and affect the outcome of the experiment.

Rinsing the graduated cylinder with a small amount of the solution being transferred can help ensure that all of the solution is transferred to the beaker and any residual solution is also added to the beaker. This can help to minimize the error introduced by residual solution or carryover.

To know more about solution, here

brainly.com/question/29732765

#SPJ4

To calculate the amount of heat required to heat 250.0 g of water from 22.0 degrees C to 75.0 degrees C, we can use the formula:

Q = m × c × ΔT

where Q is the amount of heat, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature of the water.

The specific heat capacity of water is 4.184 J/(g·°C), which means that it takes 4.184 joules of energy to raise the temperature of 1 gram of water by 1 degree Celsius.

Substituting the given values, we get:

Q = 250.0 g × 4.184 J/(g·°C) × (75.0°C - 22.0°C)

Q = 250.0 g × 4.184 J/(g·°C) × 53.0°C

Q = 55,317.2 J or 55.32 kJ (to two decimal places)

Therefore, it requires 55.32 kJ of heat to raise the temperature of 250.0 g of water from 22.0°C to 75.0°C.

The pH of the resulting solution is 10.89.

One may determine the pH of a solution by knowing the hydrogen ion concentration in molarity (M). The pOH value, which may also be used to determine the pH of a solution, is influenced by the concentration of the h+ ions. The pH of the mixture is 10.89.

Anything that has a pH of 7.0 or less is acidic, while everything that has a pH of 7.0 or more is alkaline or basic. The pH scale, which goes from 0 (very acidic) to 14 (very basic/alkaline), contains all pH values for typical materials.

volume1 = 25 ml = 25\1000 = 0.025lit

volume 2= 15ml = 15/1000 = 0.015lit

[tex]n_{CH_{3}NH_{2} } = 0.432M*0.025Lit[/tex]

              = 0.0108 moles

[tex]n_{HCL} = 0.234M*0.015Lit[/tex]

         = 0.00351moles

[tex]CH_{3} NH_{2} + H_{3} O[/tex]  ⇆  [tex]CH_{3} N^{+}H _{3} +H_{2} O[/tex]

Initial charge of [tex]CH_{3} NH_{2}[/tex] = 0.0108-0.00351 = 0.00729

Initial charge of [tex]CH_{3} N^{+}H _{3}[/tex] = 0+0.00351

[tex]pH= 14-(p^{xb} +log\frac{[CH_{3}N^{+} H_{3}] }{[CH_{3}NH_{2} ]} )[/tex]

       [tex]= 14-(3.43+Log(\frac{0.00351}{0.00729} )[/tex]

       = 10.89

The pH of the resulting solution is 10.89      

Learn more about pH here:

https://brainly.com/question/17329058

#SPJ4

The solution has a concentration of 0.10 M, is neutral with a pH of 7, and is electrically neutral.

At the point when 0.10 mol of potassium chloride (KCl) is added to 1.00 L of water, an answer is shaped. This arrangement has a grouping of 0.10 M, and that really intends that there are 0.10 moles of KCl per liter of water.The arrangement is impartial, as KCl is a salt that separates totally in water, delivering equivalent measures of potassium particles (K+) and chloride particles (Cl-), neither of which have acidic or essential properties. Subsequently, the pH of the arrangement is 7, which is unbiased.

This fixation is otherwise called the molarity of the arrangement. Furthermore, the arrangement is electrically nonpartisan, as the positive charges from the potassium particles balance out the negative charges from the chloride particles.

To learn more about molarity, refer:

https://brainly.com/question/29864297

#SPJ4

What is a correct statement about the solution prepared by adding 0.10 mol of potassium chloride, KCl, to 1.00 L of water?

The solubility of Al(OH)3 in 0.000010 M NaOH is 3.2 x 10⁻¹°M to 2 significant figures.

How we can calculate solubility ?

The balanced chemical equation for the dissolution of Al(OH)3 in water is:

Al(OH)3(s) + 3 OH-(aq) ↔ Al(OH)3 3-(aq)

The solubility product expression is:

Ksp = [Al(OH)3 3-][OH-]³

Since the concentration of OH⁻ is provided, we can use it to find the concentration of Al(OH)3 3- and then calculate the solubility:

[OH-] = 0.000010 M

From the balanced equation, we can see that the concentration of Al(OH)3 3- is three times the concentration of OH⁻, so:

[Al(OH)3 3⁻] = 3[OH⁻] = 3(0.000010 M) = 3.0 x 10⁻⁵ M

Substituting this value and the Ksp into the solubility product expression, we get:

1.0 x 10⁻³³= (3.0 x 10⁻⁵)¹ [0.000010]³

Solving for the solubility [Al(OH)3] gives:

[Al(OH)3] = (1.0 x 10⁻³³/0.000010³)^1/4 = 3.2 x 10⁻¹°  M

Therefore, the solubility of Al(OH)3 in 0.000010 M NaOH is 3.2 x 10⁻¹°M to 2 significant figures.

Learn more about solubility

brainly.com/question/29661360

#SPJ11

The solubility of the gas at a pressure of 85 kPa is 0.456 g/L.

The relationship between pressure and a gas's solubility is straightforward. That is, it gets bigger as the strain gets bigger.

The combined gas law can be used to resolve this issue and says that:

(P1V1)/T1 = (P2V2)/T2

To solve for V2, which stands for the new volume at the reduced pressure, we can rearrange this equation as follows:

V2 = (P1V1T2)/(P2T1)

Since the temperature is held constant, T1 = T2, and this simplifies to:

V2 = (P1V1)/P2

Solubility2 = (Solubility1 x P2) / P1

where the solubility at greater pressure is denoted by Solubility1.

With numbers from the problem substituted, we obtain:

Solubility2 = (0.584 g/L x 85 kPa) / 109 kPa

Simplifying this expression, we get:

Solubility2 = 0.456 g/L.

To know more about solubility visit:-

https://brainly.com/question/28170449

#SPJ1

Concern of the survey method of research is : 3.)the researcher is dependent on the person answering the survey to be honest.

One concern of the survey method of research is that the researcher is dependent on the person answering the survey to be honest. There is a risk that participants may provide inaccurate or incomplete responses due to range of factors such as social desirability bias, memory recall issues, or misunderstanding of questions.

Therefore, option 3)the researcher is dependent on the person answering the survey to be honest is the most accurate answer.

To know more about survey method, refer

https://brainly.com/question/13435620

#SPJ1

Both polarity and bond length have an impact on the strength of an acid. But bond length has an effect on limited number of acids. So while comparing polarity has more impact on strength of the acid.

Strength of an acid is determined by how easily the acid dissociates and ionizes in water. Dissociation of acid is governed by the following factors.

1. Size of the atom

2. Electronegativity differences

3. Charge on the acid

4. Oxidation state of the central atom.

As the size increases, the bond length increases. The bond becomes weaker and dissociates easily. So the acid become stronger. This trend is usually seen in hydro halides. HCl will be a stronger acid than HF. But the bond length determines the strength of an acid only to a certain extend.

As difference in electronegativity increases, the polarity between atoms increases. So dissociation will become easier. So higher the polarity, greater the acid strength. In almost all acids, polarity determines its strength.

So polarity has more impact than bond length.

For more information regarding strength of an acid, kindly refer

https://brainly.com/question/30323941

#SPJ4

When starting with 4 moles of Br2, 8/3 moles of AlBr3 will be produced.

To obtain the answer, we'll use the following chemical equation:2Al(s) + 3Br2(l) → 2AlBr3(s)To calculate the number of moles of AlBr3 formed, we must first determine the limiting reagent.

The limiting reagent is the substance that runs out first and prevents the reaction from proceeding.

The reactant that produces the smallest number of moles of the product is typically the limiting reagent in problems like this.

So, let's calculate the number of moles of AlBr3 that can be produced from each reactant when 4 moles of Br2 are used:

For 4 moles of Br2:2AlBr3(s) will be produced from 3 mol of Br24 mol of Br2 will produce (2 mol AlBr3/3 mol Br2) × 4 mol Br2 = 8/3 mol AlBr3

Therefore, when starting with 4 moles of Br2, 8/3 moles of AlBr3 will be produced.

To know more about moles refer to-

brainly.com/question/26416088#

#SPJ11

During the titration of 36.53 ml of 0.29 m hno3(aq) with 0.12 m naoh after 11.23 ml of the base 0.71 of  pH have been added.

During the titration of [tex]HNO_{3}[/tex] with NaOH, the reaction can be represented as:

[tex]HNO_{3}[/tex] + NaOH → [tex]NaNO_{3}[/tex] +[tex]H_{2}O[/tex]

To calculate the pH, first determine the moles of [tex]HNO_{3}[/tex] and NaOH.

moles of [tex]HNO_{3}[/tex] = volume (L) × concentration (M) = 0.03653 L × 0.29 M = 0.01059 mol
moles of NaOH = 0.01123 L × 0.12 M = 0.001348 mol

Now, find the moles of [tex]HNO_{3}[/tex] remaining after reaction with NaOH:

moles of [tex]HNO_{3}[/tex] remaining = 0.01059 mol - 0.001348 mol = 0.009242 mol

Calculate the new concentration of[tex]HNO_{3}[/tex]:

concentration of [tex]HNO_{3}[/tex] = moles of [tex]HNO_{3}[/tex] remaining / total volume
total volume = initial volume of [tex]HNO_{3}[/tex]+ volume of NaOH added = 0.03653 L + 0.01123 L = 0.04776 L

concentration of [tex]HNO_{3}[/tex] = 0.009242 mol / 0.04776 L = 0.1935 M

Finally, calculate the pH using the formula:

pH = -log[H+] = -log([[tex]HNO_{3}[/tex]]) = -log(0.1935) ≈ 0.71

Know more about   titration    here:

https://brainly.com/question/186765

#SPJ11

Answer:

The concentration of products and reactants is required to calculate the equilibrium constant of a chemical reaction.

i. Balanced chemical equation: [tex]\rm CoCO_3 + 2 HCl \rightarrow COCl_2 + CO_2 + H_2O[/tex]

[tex]\rm COCl_2 + 6H_2O \rightarrow COCl_2\cdot 6H_2O[/tex]

ii. Highest yield:

To determine the limiting reactant, we must first determine the maximum production of [tex]\rm COCl_26H_2O[/tex]. By counting the moles of HCl and [tex]\rm CoCO_3[/tex] utilised and comparing them to the stoichiometric coefficients in the balanced chemical equation, this can be accomplished.

Several moles of HCl are used:

[tex]\rm n(HCl) = C \times V = 2.0\ M \times 0.040\ L = 0.080\ mol[/tex]

Several moles of [tex]\rm CoCO_3[/tex] were used:

[tex]\rm n(CoCO_3) = m/M = 5.95\ g / 118.94\ g/mol = 0.050\ mol[/tex]

We can deduce that the mole ratio of HCl to [tex]\rm CoCO_3[/tex]  in the balanced equation is 2:1. This means that more HCl than [tex]\rm CoCO_3[/tex] was used, at a rate of moles per litre. [tex]\rm CoCO_3[/tex] is the limiting reactant, according to this.

iii. Quantity of [tex]\rm CoCl_2[/tex] formed:

One mole of [tex]\rm CoCO_3[/tex] reacts to create one mole of [tex]\rm CoCl_2[/tex], as shown by the equation's balanced version. As a result, 0.050 moles of [tex]\rm CoCl_2[/tex] were also produced.

iv. The quantity of [tex]\rm COCl_26H_2O[/tex] that was produced:

One mole of [tex]\rm CoCl_2[/tex] reacts to produce one mole of [tex]\rm COCl_26H_2O[/tex], as shown by the equation's balanced version. As a result, 0.050 moles of [tex]\rm COCl_26H_2O[/tex] were also produced.

v. Mass of one mole of [tex]\rm COCl_2\cdot 6H_2O[/tex] = 238g

vi. Maximum yield off [tex]\rm COCl_2\cdot 6H_2O[/tex]:

Maximum yield = number of moles of f [tex]\rm COCl_2\cdot 6H_2O[/tex]  × molar mass of f [tex]\rm COCl_2\cdot 6H_2O[/tex]

Maximum yield = 0.050 mol × 238 g/mol = 11.9 g

viii. Showing that cobalt (II) carbonate is in excess:

To show that [tex]\rm CoCO3[/tex] is in excess, we need to calculate the theoretical yield of f [tex]\rm COCl_2\cdot 6H_2O[/tex]  based on the number of moles of HCl used.

ix. A number of moles of HCl used:

[tex]\rm n(HCl) = C \times V = 2.0\ M \times 0.040\ L = 0.080\ mol[/tex]

By looking at the equation in its entirety, we can see that 1 mole of [tex]\rm CoCO_3[/tex] and 2 moles of HCl combine to generate 1 mole of [tex]\rm CoCl_2[/tex]. As a result, the greatest amount of [tex]\rm CoCl_2[/tex] that may be produced using the HCl utilised is:

1 mol [tex]\rm CoCl_2/2[/tex] mol HCl 0.080 mol HCl = 0.040 mol [tex]\rm CoCl_2[/tex]

The actual amount of [tex]\rm CoCl_2[/tex] generated is 0.050 mol, exceeding the maximum amount that may be created using the HCl utilised. This indicates an overabundance of [tex]\rm CoCO_3[/tex].

xi. Number of moles of [tex]\rm CoCO_3[/tex] in 5.95 g of cobalt (II) carbonate:

[tex]\rm n(CoCO_3)[/tex] = m/M = 5.95 g / 118.94 g/mol = 0.050 mol

to know more about concentration here:

brainly.com/question/10725862

#SPJ1

It will take approximately 2368 years for a wooden desk made of fresh lumber to have 75% of its original Carbon-14 remaining.

To determine how many years it will take for a wooden desk to have 75% of its original Carbon-14 remaining, we'll use the half-life formula:

Final amount = Initial amount * (1/2)^(time elapsed / half-life)

Let's plug in the values:

- Final amount: 75% of the original Carbon-14 (0.75 * Initial amount)

- Initial amount: 100% of the original Carbon-14

- Half-life: 5700 years

0.75 * Initial amount = Initial amount * (1/2)^(time elapsed / 5700)

Now we can divide both sides by the Initial amount:

0.75 = (1/2)^(time elapsed / 5700)

To solve for the time elapsed, we can take the logarithm of both sides:

log(0.75) = log((1/2)^(time elapsed / 5700))

Now we can use the property of logarithms log(a^b) = b*log(a):

log(0.75) = (time elapsed / 5700) * log(1/2)

Now we can solve for the time elapsed by dividing both sides by log(1/2):

time elapsed = (log(0.75) / log(1/2)) * 5700

Using a calculator, we get:

time elapsed ≈ 2368 years

to know more about the half-life of C-14 refer here:

https://brainly.com/question/24710827#

#SPJ11

the reaction releases 1,066.3 kJ of heat.

The balanced chemical equation for the reaction between Fe2O3 and CO to produce Fe and CO2 is:

Fe2O3 + 3CO → 2Fe + 3CO2

According to the equation, 1 mole of Fe2O3 reacts with 3 moles of CO to produce 2 moles of Fe and 3 moles of CO2.

Since there is an excess of CO, we can assume that all of the Fe2O3 will react completely. Therefore, the number of moles of CO needed can be calculated as:

3.40 mol Fe2O3 × (3 mol CO / 1 mol Fe2O3) = 10.2 mol CO

So, 10.2 moles of CO are needed to react completely with 3.40 moles of Fe2O3.

The heat released by the reaction can be calculated using the standard enthalpy of formation (ΔHf°) values for the compounds involved in the reaction. The ΔHf° values for Fe2O3, CO, Fe, and CO2 are -824.2 kJ/mol, -110.5 kJ/mol, 0 kJ/mol, and -393.5 kJ/mol, respectively.

To calculate the heat released, we can use the following formula:

ΔH = ΣnΔHf°(products) - ΣnΔHf°(reactants)

where ΣnΔHf° is the sum of the standard enthalpies of formation for the products and reactants, and n is the stoichiometric coefficient.

Plugging in the values, we get:

ΔH = (2 mol × -393.5 kJ/mol) + (3 mol × 0 kJ/mol) - (1 mol × -824.2 kJ/mol) - (3 mol × -110.5 kJ/mol)
   = -1,066.3 kJ

Therefore, the reaction releases 1,066.3 kJ of heat.
To know more about heat go through:-

https://brainly.com/question/934320

#SPJ4

A physical change during digestion would be the mechanical grinding of food materials while a chemical change would be the breaking down of complex molecules into simpler ones.

During digestion, food is broken down into smaller molecules that can be absorbed and used by the body. This process involves both physical and chemical changes.

Physical changes include mechanical digestion, where food is physically broken down into smaller pieces by chewing, grinding, and churning in the stomach.

Chemical changes involve the action of digestive enzymes, which break down large molecules into smaller ones. Carbohydrates are broken down into sugars, proteins into amino acids, and fats into fatty acids and glycerol. These smaller molecules can then be absorbed into the bloodstream and used by the body for energy and other functions.

More on digestions can be found here:https://brainly.com/question/29028558

#SPJ1

Answer:

One mole of a substance contains 6.022 x 10^23 particles (Avogadro's number).

Therefore, to find the number of moles in 9.35 x 10^24 molecules of molecular hydrogen, we need to divide this number by Avogadro's number:

moles = (9.35 x 10^24 molecules) / (6.022 x 10^23 molecules/mol)

moles = 15.5 mol (rounded to two decimal places)

Therefore, there are 15.5 moles in 9.35 x 10^24 molecules of molecular hydrogen.