8:11
GCSE Science - Physics
22 of 25
14 67%
A cat accelerates from rest to 10 m/s
when it sees a dog. This takes 2
the cat?
seconds What is the acceleration of the cat ?

Answer:

To solve this problem, you can use the formula for work, which is work = force x distance. In this case, the distance the crate is moved is the height of the loading dock, or 4 meters. The amount of work performed is given as 600 joules. So, you can set up the equation like this:

600 joules = force x 4 meters

To solve for the force, you can divide both sides of the equation by 4 meters:

600 joules / 4 meters = force x 4 meters / 4 meters

This simplifies to:

150 newtons = force

So, the force necessary to raise the 150-newton crate up the ramp to the 4-meter loading dock is 150 newtons.

The reason that Silent Spring was so influential at the time is option D: It was the first time that the public was being made aware of the long-term impacts of pollution.

Silent Spring, a book written by Rachel Carson and published in 1962, was influential at the time because it was the first book to bring awareness to the negative impacts of pesticides on the environment and human health.

Therefore, The book provided evidence and detailed accounts of the harmful effects of pesticides on wildlife and ecosystems, and it argued that the widespread use of pesticides was unsustainable and could have long-term consequences for the environment and human health.

Learn more about Silent Spring  from

https://brainly.com/question/1107586

#SPJ1

Answer:

The angle when it leaves is the same as the angle when it hits.

Explanation:

think of it as a mirror, mirrors show exactly what you display.

Answer:

204kW

Explanation:

P = t x ω = 500 x (2πx3900/60) = 204203W = 204kW

The power developed by the engine is equal to 204.1 KW.

Torque can be defined as the rotational equivalence of linear force while power is defined as the rate of doing work. The relation between torque and power scalar product of torque and angular velocity.

The relation between power and torque can be expressed mathematically as:

[tex]{\displaystyle {P = \tau \times \omega[/tex]

Where P is the power which is work done per unit of time, τ is the torque, and ω is the angular velocity.

Given, the torque that the engine develops, τ = 500 Nm

The angular velocity, ω =  3900 rev/min

ω =  3900 × 2×3.14/60

ω =  408.2 rad/s

The power developed by the engine can be calculated as:

P = 500 Nm ×  408.2 rad/s

P = 2041100 W

P = 204.1 KW

Learn more about Power and torque, here:

https://brainly.com/question/26984435

#SPJ2

Answer:

the answer is static electricity

Time required to film something in HD to collect 1 PB of data is all day for about 3.5 years.

A petabyte, or 2 to the 50th power of a byte, is a unit of measurement for memory or data storage. One exabyte is equal to about 1,024 petabytes (PB), or 1,024 terabytes (TB).

Although traditional network-attached storage (NAS) can handle petabytes of data and is expandable, it might be resource-intensive to traverse the system's ordered storage index.

A common laptop or desktop computer has 16 GB of random access memory for storage (RAM).

Learn more about Petabytes here:

https://brainly.com/question/29060237

#SPJ1

Answer:

Explanation:

circumference = diameter * [tex]\pi[/tex]

circumference = 65 * [tex]\pi[/tex]

circumference = 204.2035225m

350 km/h = 97.222222 m/s

0.4761 revolutions per second

An object has 100 J of kinetic energy. If the object’s mass doubles, then its kinetic energy will be 200J and is denoted as option C.

This is referred to as the type of energy that it possesses due to its motion and can also defined as the work which is needed to accelerate a body of a given mass from rest to its stated velocity.

The unit is in Joules and the formula is 1/2mv² where m is the mass and v is the velocity of the body or object. In a scenario where the mass is doubled or tripled and the velocity is constant then the kinetic energy will also be doubled or tripled respectively.

For instance, lets assume initial mass is 50kg and the v² is 50m/s then the kinetic energy is  1/2mv²  which is 1/2 × 50 × 50 = 1250J. When the mass is doubled it becomes 100kg which 1/2 × 100 × 50 = 2500J which depicts that  it was also doubled.

Read more about Kinetic energy here https://brainly.com/question/8101588

#SPJ1

The options are:

A.  50 Joules.

B.  100 Joules.

C.  200 Joules.

D.  400 Joule

Assuming an object has 100 Joules of kinetic energy. If the object’s mass doubles, its kinetic energy would be equal to: C. 200 Joules.

In Science, kinetic energy can be defined as a type of energy that's possessed by a physical object or body, especially due to its motion or a change in velocity (acceleration).

This ultimately implies that, a physical object or body would gain more of kinetic energy as it falls back toward the Earth because it is in motion.

Mathematically, kinetic energy can be calculated by using this formula:

K.E = 1/2 × mv²

Where:

Since the mass of the object doubles, its kinetic energy would be twice that of its initial kinetic energy;

Kinetic energy = 2 × initial kinetic energy

Kinetic energy = 2 × 100

Kinetic energy = 200 Joules.

Read more on kinetic energy here: https://brainly.com/question/8101588

#SPJ1

Complete Question:

A.  50 Joules.

B.  100 Joules.

C.  200 Joules.

D.  400 Joules.

Answer:

normal force and gravitational force

Explanation:

I hope this helps :D

Answer:

the weight of the object decreases when it is taken from the Earth to the Moon

Explanation:

The weight of an object is defined as the product of the mass of the object with the acceleration due to gravity of the Planet.

[tex]W =mg[/tex]

where,

W = weight of the object

m = mass of the object

g = acceleration due to gravity on the planet

The mass of an object remains constant everywhere in the universe. Therefore, the weight is directly proportional to the value of acceleration due to gravity.

The value of acceleration due to gravity on the Moon is lesser than its value on the Earth.

Hence, the weight of the object decreases when it is taken from the Earth to the Moon

As a well-known serial killer, David Berkowitz was infamous for starting fires and then reporting some of them to various fire officials. He started over 500 fires annually.

David Berkowitz, also known as Son of Sam, was apprehended on August 10, 1977 – 11 days after he committed his final murder—and later received six consecutive sentences of 25 years to life in prison.

Since the 18th century, arson has changed from a bad individual act to a powerful tool for group violence. The privatization of common land in England starting in 1750 restricted the access of peasants to resources like game and firewood.

Therefore, Son of Sam, also known as David Berkowitz, was apprehended by authorities after going on a homicidal rampage in New York City in the 1970s.

Learn more about Berkowitz here:

https://brainly.com/question/30036604

#SPJ2

The parallel component of the force of gravity is the net force. The perpendicular component of the force of gravity is directed opposite the normal force and as such balances the normal force.

In order to balance the normal force, the perpendicular component of gravity is pointed in the opposite direction. No other force can counteract the parallel component of the gravitational force.

The presence of an imbalanced force will then cause the object to accelerate downward along the inclined plane. This acceleration is brought on by the parallel part of the gravitational force. The net force is a parallel part of the gravitational force.

FGravity=m×g

where m is the object's mass and g is gravity's acceleration, which is 9.8 m/s2. In this case, the negative indicates that the force is downward-directed.

FParallel=FGravity×Cos(Θ)

FParallel=FGravity×Sin(Θ)

To know more about The parallel and perpendicular components of the force of gravity refer to:

https://brainly.com/question/7411500

#SPJ1

The full load primary current of a 230/115V, 2kVA transformer can be calculated using the formula:

I_primary = (2kVA * 1000 VA/kVA) / (230V)

I_primary = 8.7V

The full load secondary current of the transformer can be calculated using the formula:

I_secondary = (2kVA * 1000 VA/kVA) / (115V)

I_secondary = 17.4V

Therefore, the full-load primary current of the transformer is approximately 8.7V, and the full-load secondary current is approximately 17.4V. It is important to note that these values are based on the assumption that the transformer is operating at its full load capacity. If the transformer is operating at a lower load, the primary and secondary currents will be correspondingly lower.

The value of mA is the equation of conservation of linear momentum is determined as mA = [ mB (vBi - vBf) ] / [  (vAf - vAi ) ].

The principle of conservation of linear momentum states that in a closed or isolated system, the total momentum of the system is always conserved.

Mathematically, the formula for the principle of conservation of linear momentum is given as;

Pi = Pf

where;

mAvAi + mBvBi = mAvAf + mBvBf

where;

To find the value of mA, we will make mA the subject of the formula as follow;

mAvAf  - mAvAi = mBvBi - mBvBf

mA (vAf - vAi ) = mB (vBi - vBf)

mA = [ mB (vBi - vBf) ] / [  (vAf - vAi ) ]

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

#SPJ1

Answer:

the film's minimum thickness to make the reflected light enhanced in brightness is 112.8 nm

Explanation:

Given the data in the question;

wavelength λ = 600 nm  

index of refraction = 1.33

so the film's minimum thickness to make the reflected light enhanced in brightness = ?

condition for maxima for reflected light is;

2nt = [ ( 2m + 1 )λ ] / 2

we solve for t

4nt = [ ( 2m + 1 )λ ]

t =  [ ( 2m + 1 )λ ] / nt

Now, for minimum thickness m = 1

t = λ / 4n

so we substitute in our values;

t = 600 nm / ( 4 × 1.33 )

t = 600 nm / 5.32

t = 112.78195 ≈ 112.8 nm  { one decimal place }

Therefore, the film's minimum thickness to make the reflected light enhanced in brightness is 112.8 nm

The coefficient of kinetic friction between the block and the rough surface is -0.6.

Kinetic friction is a type of friction that occurs when two objects are in contact and moving relative to each other. It is also known as sliding friction or dynamic friction. Kinetic friction is caused by the interaction of the two surfaces as they move against each other. The force of kinetic friction acts in the opposite direction of the motion of the two objects and is proportional to the normal force between them. The coefficient of kinetic friction is a measure of the amount of friction between two surfaces and is determined by the materials of the two surfaces.

The coefficient of kinetic friction can be found using the equation:
μk = (vf - vi) / (d * a)
where μk is the coefficient of kinetic friction, vf is the final velocity, vi is the initial velocity, d is the distance traveled, and a is the acceleration due to gravity (9.8 m/s2).
Plugging in the given values, we get:
μk = (6 - 18) / (30 * 9.8)
μk = -0.6
Therefore, the coefficient of kinetic friction between the block and the rough surface is -0.6.

To learn more about kinetic friction
https://brainly.com/question/20241845
#SPJ1

Answer:  La valeur du poids dépend de la pesanteur et de la masse. ... La masse est une grandeur positive liée à la quantité de matière contenue dans un objet. ... qui correspond à la force d'attraction exercée par l'astre sur lequel il se trouve (et qui ... 1 kg n'aura pas le même poids à la surface de la Lune ou à la surface de la Terre.

Explanation:

The statement that a doctor who is monitoring the health of astronauts in space has just received a signal that indicates one of the astronauts may be experiencing low blood sugar. The mission control personnel that would communicate this to the astronaut on board the space craft is CAPCOM is true. So the correct option is A.

When there is a mission in which astronauts do space exploration, there will be mission control on the ground made up of members who will take over from the astronauts on earth, this will be the CAPCOM. These people will transmit the decision-making of the mission director who will be from the ground and will also communicate the needs of the astronauts to the people who control the mission.

To learn more about CAPCOM visit: https://brainly.com/question/27805681

#SPJ1

Answer:

the person on the boat is moving 15mph on the boat and throws the ball 10mph. you add that together its 25mph. the other person is standing on land so their  is no extra speed.

Explanation:

its common

The person on the boat is moving 15 mph on the boat and throws the ball 10 mph. you add that together its 25 mph. the other person is standing on land so their  is no extra speed.

The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.

The two observation are different because of relative speed is measured as one with observer in the rest or zero speed in other case observer is in the motion with some speed so these are different.

The person on the boat is moving 15 mph on the boat and throws the ball 10 mph. you add that together its 25 mph. the other person is standing on land so their  is no extra speed.

To learn more about speed refer to the link:

brainly.com/question/28224010

 #SPJ2

Answer:

Explanation:

amplitude of oscillation A = .06 m .

maximum velocity = ω A where ω is angular frequency .

ω A = 3.2 m/s ( Given )

ω x .06  = 3.2

ω = 53.33 rad /s .

velocity when the displacement is x can be given by the expression

v² = ω²( A² - x² )

x = .04 m

v² = 53.33²( .06² - .04² )

=  2844.1( .0036 - .0016 )

= 5.688

kinetic energy = 1/2 m v²

= .5 x .050 x 5.688

= .1422 J .

=

Answer:

everything

Explanation:

Used to refer to a thing, no matter what

There is strong evidence to support the idea that the universe is expanding. One of the main pieces of evidence for this is the observation of the cosmic microwave background radiation, which is a faint glow of microwave radiation that permeates the entire universe. This radiation is thought to be a residual heat left over from the Big Bang, the event that is believed to have marked the beginning of the universe.

The cosmic microwave background radiation has a very even temperature throughout the universe, but if the universe were not expanding, we would expect to see some regions that are slightly hotter or cooler than others due to differences in density. However, measurements of the cosmic microwave background radiation show that it has a very uniform temperature, which suggests that the universe must be expanding in order to even out any temperature differences that may have existed in the past.

Other evidence for the expansion of the universe includes the observation of supernovae in distant galaxies, which are explosions of massive stars that can be used to measure the distances to those galaxies. These measurements have shown that the most distant galaxies are moving away from us at a speed that is proportional to their distance, which is consistent with the expansion of the universe.

Hope This Helps You!

Answer:

[tex]\text{Remember: Power is given by:}\frac{Work}{Time}\\\therefore \frac{600J}{10sec}=60\text{ Watts of Power-D}[/tex]

Answer:

B. Electromagnetism is the forces and fields associated with charge.

Answer: 3.3·10^6 m/s

Explanation: Ionization energy of H is 13.6 eV. So the kinetic energy of electron is 31,2 eV.  Kinetic Energy of Electron is  E = ½mv^2

1 eV = 1.60·10^-19 J and  m = 9.1·10^-31 kg.   Solving speed v = √( 2E / m)

v = √(2·31.2·1.60·10^-19 J /9.1·10^-31 kg) = 3.3·10^6 m/s

The  average velocity of the airplane  between  Milwaukee and Chicago  is 1083.33 meter/second.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

The total distance between  Milwaukee and Chicago = 130 kilometer

= 1,300,000 meter.

Time interval = 20 minute = 20×60 second = 1200 second.

The  average velocity of the airplane = total distance/time interval

= 1,300,000 meter / 1,200 second.

= 1083.33 meter/second.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

Answer:

The force of friction opposes the motion of an object, causing moving objects to lose energy and slow down. When objects move through a fluid, such as air or water, the fluid exerts a frictional force on the moving object. The frictional force from a fluid is called a drag force.