a 25.00 ml sample of 0.200 m hcl is titrated with 0.2 m naoh. what is the ph after the addition of 12.50 ml of naoh?

Answers

Answer 1

The given concentration of HCl is 0.200 M and the volume of the solution is 25.00 mL.Moles of HCl = concentration × volume Moles of HCl = 0.200 M × 25.00 mL = 0.005 moles Since NaOH is added to this acid, a neutralization reaction occurs: NaOH + HCl → NaCl + H2OThe balanced chemical equation above indicates that 1 mole of HCl reacts with 1 mole of NaOH. This means that 0.005 moles of NaOH will be required to neutralize 0.005 moles of HCl.

Volume of NaOH used = 12.50 mL = 0.0125 LV = 0.2 MV = 0.0125 M Therefore, the number of moles of NaOH used in the reaction is:0.2 M × 0.0125 L = 0.0025 moles of NaOHHCl and NaOH neutralize each other, leaving NaCl and water. After the neutralization reaction, the remaining concentration of NaOH is 0.2 M - 0.1 M = 0.1 M.

The final volume of the solution is 25.00 mL + 12.50 mL = 37.50 mL. The concentration of the resulting solution is: 0.0025 / 0.0375 = 0.067 MTo calculate the pH, we need to use the equation: pH = -log[H3O+]The concentration of the acid solution after the addition of NaOH is negligible. Hence, the concentration of H3O+ is very small. pH = -log[H3O+]pH = -log(1.49 × 10^-10)pH = 9.83Therefore, the pH after the addition of 12.50 mL of NaOH is 9.83.

Therefore the answer is: pH of the solution after the addition of  12.50 mL of NaOH is 9.83.

For more questions on: volume

https://brainly.com/question/29493123

#SPJ11  


Related Questions

tetracyanoethylene has the skeleton shown below: from its lewis structure determine the following: reference: ref 5-2 how many of the atoms are sp 2 hybridized?

Answers

All 12 carbon atoms in tetracyanoethylene are sp² hybridized due to the trigonal planar geometry around each carbon atom. Option 1 is correct.

In the Lewis structure of tetracyanoethylene, there are a total of 12 carbon atoms, 4 nitrogen atoms, and 6 double bonds. Each carbon atom has a double bond with a neighboring carbon atom and a triple bond with a neighboring nitrogen atom, while each nitrogen atom has a triple bond with a neighboring carbon atom.

To determine how many of the atoms are sp² hybridized, we can look at the electronic geometry around each atom in the molecule. The carbon atoms in tetracyanoethylene have a trigonal planar geometry, which corresponds to sp² hybridization, due to the three atoms bonded to each carbon atom lying in the same plane.

Therefore, all 12 carbon atoms in tetracyanoethylene are sp² hybridized. In summary, all 12 carbon atoms in tetracyanoethylene are sp² hybridized due to the trigonal planar geometry around each carbon atom. Hence Option 1 is correct.

The complete question is:

Tetracyanoethylene has the skeleton shown below: from its Lewis structure determine the following: Reference: Ref 5-2 (The image attached). How many of the atoms are sp² hybridized?

12141610

To know more about the Lewis structure, here

https://brainly.com/question/30247091

#SPJ4

Need help on question 16

Answers

Answer: HF

If a hydrogen is bonded to an oxygen, fluorine, or nitrogen atom, it will form a hydrogen bond. Due to an unequal sharing of electrons, there is a significant dipole moment where the hydrogen atom is positive and the flourine/oxygen/nitrogen is negative.

Which phrase describes a situation in which all the forces are balanced

Answers

Answer:

The phrase that describes a situation in which all the forces are balanced is "equilibrium"

once a metal ion has become fully hydrated to become a metal hydrate, the resulting complex can exhibit behavior that is characteristic of a

Answers

Water molecules hydrate or "solvate" metal ions in aqueous solutions. This main sphere of hydration typically consists of six water molecules. The hydrated metal ion undergoes a stepwise hydrolysis in which it donates an H ion, acting as a weak acid. The correct option is B.

In an aqueous solution, metal ions are hydrated, which means that a protective shell of typically four or six water molecules surrounds them. A complex ion (or, simply, complex) is a type of ion that is created when a core metal ion joins forces with one or more surrounding ligands, molecules, or ions that each possesses at least one lone pair of electrons.

Lewis acid-base interaction causes a metal ion and ligand to combine to form a complex ion. The ligand, which has one or more lone pairs of electrons, functions as a Lewis base, while the positively charged metal ion functions as a Lewis acid.

Thus the correct option is B.

To know more about metal ions, visit;

https://brainly.com/question/2458752

#SPJ12

Your question is incomplete, but most probably your full question was,

once a metal ion has become fully hydrated to become a metal hydrate, the resulting complex can exhibit behavior that is characteristic of a

A. Strong acid

B. Weak acid

C. Strong base

D. Weak base

How many grams of magnesium chloride (MgCl2) solution would contain 13.5 grams of solute?
Please show work

Answers

Answer:

To solve this problem, we need to know the concentration of the magnesium chloride solution. Without this information, we cannot determine how many grams of the solution would contain 13.5 grams of solute.

The concentration of a solution is typically expressed in terms of the number of moles of solute dissolved in a liter (or other volume) of solution. We would need this information to calculate the mass of the solution that would contain 13.5 grams of solute.

If you have any additional information or context, please let me know and I will be happy to try to help further.

calculate the mass of sodium bicarbonate and mass of sodium carbonate needed to make 50.0 ml of a 0.100 m carbonate buffer with ph

Answers

To make 50.0 mL of a 0.100 M carbonate buffer with a pH of 9.00, we would need to weigh out 0.223 g of NaHCO₃ and 0.177 g of Na₂CO₃.

In order to calculate the hundreds of sodium bicarbonate and sodium carbonate wished to make the buffer solution we pick to replicate on consideration on the henderson-hasselbalch equation which relates the ph of the buffer to the pka and the ratio of the concentrations of the susceptible acid and its conjugate base

Buffer solution mass calculation

calculate the mass of sodium bicarbonate and mass of sodium carbonate needed to make 50.0 ml of a 0.100 m carbonate buffer with ph

In order to calculate the masses of sodium bicarbonate and sodium carbonate needed to make the buffer solution, we need to consider the Henderson-Hasselbalch equation, which relates the pH of the buffer to the pKa and the ratio of the concentrations of the weak acid and its conjugate base:

pH = pKa + log([A-]/[HA])

where pH is the desired pH of the buffer, pKa is the acid dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, we want to make a carbonate buffer, which consists of the weak acid H₂CO₃ (carbonic acid) and its conjugate base HCO₃- (bicarbonate ion), with a pH of 9.00. The pKa of carbonic acid is 6.35. Using the Henderson-Hasselbalch equation, we can solve for the ratio of [HCO₃-]/[H₂CO₃] that gives a pH of 9.00:

9.00 = 6.35 + log([HCO₃-]/[H₂CO₃])

2.65 = log([HCO₃-]/[H₂CO₃])

10^2.65 = [HCO₃-]/[H₂CO₃]

[1.98] = [HCO₃-]/[H₂CO₃]

So the ratio of [HCO₃-]/[H₂CO₃] in the buffer should be approximately 2. Therefore, we can choose any total concentration for the buffer as long as the ratio of bicarbonate to carbonic acid is 2.

Next,

[HCO₃-] = 2 * [H₂CO₃]

[HCO₃-] + [H₂CO₃] = 0.100 M

Substituting the first equation into the second, we get:

3[H₂CO₃] = 0.100 M

[H₂CO₃] = 0.0333 M

[HCO₃-] = 0.0667 M

Similarly, the molecular weight of Na₂CO₃ is 105.99 g/mol, so the mass needed to make 50.0 mL of a 0.0333 M solution is:

mass of Na₂CO₃ = 0.0333 M * 105.99 g/mol * 0.0500 L

= 0.177 g

Therefore, to make 50.0 mL of a 0.100 M carbonate buffer with a pH of 9.00, we would need to weigh out 0.223 g of NaHCO3 and 0.177 g of Na₂CO₃.

learn more about henderson-hasselbalch equation here:  brainly.com/question/26746644

#SPJ4

the half life for a first order reaction is 27 min. how long will it take for 4 half lives to occur?

Answers

The time required for one half-life in a first-order reaction is given by the formula below and it shows the result how it will take 108 minutes for 4 half-lives to occur in this first-order reaction.

The formula is t1/2 = 0.693 / k

where k is the rate constant for the reaction.

Given that the half-life of the reaction is 27 minutes, we can rearrange this formula to solve for the rate constant:

k = 0.693 / t1/2

k = 0.693 / 27 min

k = 0.0257 min^-1

Now we can use the first-order rate law to determine the time required for 4 half-lives to occur:

t = (4 x t1/2) = (4 x 27 min) = 108 min

So, it takes 108 mins that is equal to one hour forty eight minutes to occur four half lives.

Learn more about  First Order Reaction here:

brainly.com/question/12446045

#SPJ4

a hypoeutectoid steel is one with an alloy composition between that of the left-hand end of the tie line defining the eutectoid reaction and the eutectoid composition, i.e., between ---select--- weight percent carbon. it is common though to refer to any composition to the ---select--- of the eutectoid point as hypoeutectoid. a hypereutectoid steel is one with an alloy composition between ---select--- wei

Answers

A hypoeutectoid steel is one with an alloy composition between that of the left-hand end of the tie line defining the eutectoid reaction and the eutectoid composition, i.e., between 0 and 0.76 weight percent carbon. It is common though to refer to any composition to the left of the eutectoid point as hypoeutectoid. A hypereutectoid steel is one with an alloy composition between 0.76 and 2.14 weight percent carbon.

In simpler terms, hypoeutectoid steel contains less carbon than the eutectoid composition (0.76 weight percent carbon), while hypereutectoid steel contains more carbon than the eutectoid composition. The eutectoid point is where the steel has the perfect balance of carbon content and can exist in both austenite and ferrite phases at a specific temperature (the eutectoid temperature).
When cooling a hypoeutectoid steel, it first forms a proeutectoid ferrite phase, followed by the eutectoid transformation of the remaining austenite into pearlite (a mixture of ferrite and cementite). This results in a microstructure with ferrite and pearlite phases.
On the other hand, cooling a hypereutectoid steel leads to the formation of proeutectoid cementite, followed by the eutectoid transformation of the remaining austenite into pearlite. This results in a microstructure with cementite and pearlite phases.
Understanding the differences between hypoeutectoid and hypereutectoid steels is important in selecting the appropriate material for specific applications, as their mechanical properties, such as strength and ductility, can vary significantly.

for more such question on hypoeutectoid steel

https://brainly.com/question/27433512

#SPJ11

ag3po4 has a solubility of 0.013 grams per liter. the molar mass of ag3po4 is 418.58 grams/mol. what is the ksp value of ag3po4?

Answers

The Ksp value of Ag₃PO₄ is 2.17 × 10⁻²².

The solubility product constant (Ksp) expression for Ag₃PO₄ will be;

Ag₃PO₄(s) ⇌ 3 Ag⁺(aq) + PO₄³⁻(aq)

Equilibrium expression for this reaction will be written as;

Ksp = [Ag⁺]³[PO₄³⁻]

We are given the solubility of Ag₃PO₄, which is 0.013 grams per liter. To calculate the concentration of Ag⁺ and PO₄³⁻ in the saturated solution, we need to first calculate the molar solubility of Ag₃PO₄

Molar solubility of Ag₃PO₄ = (0.013 g/L) / (418.58 g/mol) = 3.11 x 10⁻⁵ M

Since the stoichiometry of the reaction is 1:3 for Ag⁺ and PO₄³⁻, we can write;

[Ag⁺] = 3 × 3.11 × 10⁻⁵ M = 9.33 × 10⁻⁵ M

[PO₄³⁻] = 3.11 × 10⁻⁵ M

Substituting these values into the Ksp expression, we get;

Ksp = (9.33 × 10⁻⁵)³ × (3.11 × 10⁻⁵)

= 2.17 × 10⁻²²

To know more about Ksp value here

https://brainly.com/question/28167974

#SPJ4

are the bonds in each of the following substances ionic, nonpolar covalent, or polar covalent? select the single best answer for each substance.

Answers

The bonds in each of the following substances are Ionic bond ,Polar covalent bond ,  Nonpolar covalent bond.

NaCl: Ionic bond. In this substance, sodium (Na) loses one electron to form a positively charged ion (Na+), while chlorine (Cl) gains one electron to form a negatively charged ion (Cl-). The oppositely charged ions attract each other, forming an ionic bond.

[tex]H_{2} O[/tex]: Polar covalent bond. Oxygen (O) is more electronegative than hydrogen (H), meaning it has a greater ability to attract electrons. As a result, the electrons are shared unevenly between O and H, creating a partial negative charge on O and a partial positive charge on H.

[tex]CH_{4}[/tex]: Nonpolar covalent bond. Carbon (C) and hydrogen (H) have similar electronegativities, so the electrons are shared evenly between the atoms. This results in a nonpolar covalent bond, where there is no significant charge separation.

Know more about bonds here :

brainly.com/question/26712131

#SPJ11

find the pH of a solution whose H3O is equals 9.5 times 10 to the negative 8 power

Answers

The pH of the solution is 7.02.

pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm (base 10) of the concentration of hydronium ions (H3O+) in a solution. The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral, a pH below 7 is acidic, and a pH above 7 is basic.

In this case, the given concentration of H3O+ is 9.5 x 10^-8 M. To find the pH of the solution, we can use the formula:

pH = -log[H3O+]

Substituting the given value of [H3O+]:

pH = -log(9.5 x 10^-8) = 7.022.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ1

What concentrations of acetic acid and sodium acetate are requiredto prepare a buffer solution with pH = 4.60? Ka =1.8 x 10-5 for acetic acid.

Answers

The concentrations of acetic acid and sodium acetate required to prepare a buffer solution with a pH of 4.60 are 1.70 M and 0.756 M, respectively.

Acetic acid (CH3COOH) and sodium acetate (CH3COO–Na+) are required to prepare a buffer solution with a pH of 4.60.

The dissociation of acetic acid is given below:CH3COOH(aq) ↔ CH3COO–(aq) + H+(aq) Ka = [CH3COO–][H+]/[CH3COOH] = 1.8 x 10-5The formula for pH is pH = pKa + log [salt]/[acid]Substituting the given values in the formula we get,

4.60 = pKa + log [salt]/[acid]pKa = -log Ka = -log (1.8 x 10-5) = 4.74

Therefore, we get,

4.60 = 4.74 + log [salt]/[acid]log [salt]/[acid] = 4.60 – 4.74 = -0.14[salt]/[acid] = antilog (-0.14) = 0.445

The ratio of the concentration of the salt to that of the acid is 0.445. As both the acetic acid and the sodium acetate are weak electrolytes, we can assume that the ionic strength of the buffer solution will be negligible.

As a result, the ratio of the moles of the salt and acid will be the same as the ratio of their respective concentrations. Hence, if the concentration of the acetic acid is ‘a’, then the concentration of the sodium acetate should be 0.445 times the concentration of the acetic acid.

Therefore, the concentrations of acetic acid and sodium acetate required to prepare a buffer solution with a pH of 4.60 are 1.70 M and 0.756 M, respectively.

To know more about concentrations refer to-

brainly.com/question/10725862#

#SPJ11

A container has .25 moles of CO, 1.25 moles of NH 3 , and .75 moles Kr. If the pressure of Carbon
Monoxide is 440 torr, what is the total pressure and the pressure of the other two gasses?

Answers

The partial pressures of NH3 and Kr are 244.44 torr and 147.73 torr, respectively.

Steps

We can use the ideal gas law to solve this problem, which states:

PV = nRT

we need to find the total number of moles of gas in the container:

Total moles = 0.25 moles CO + 1.25 moles NH3 + 0.75 moles Kr

Total moles = 2.25 moles

Next, we can use the ideal gas law to find the total pressure:

PtotalV = ntotalRT

Ptotal = ntotalRT/V

Ptotal = PCO + PNH3 + PKr

PNH3/Ptotal = nNH3/ntotal

PKr/Ptotal = nKr/ntotal

Substituting the given values:

PCO = 440 torr

ntotal = 2.25 moles

nNH3 = 1.25 moles

nKr = 0.75 moles

PNH3/Ptotal = 1.25/2.25 = 0.5556

PKr/Ptotal = 0.75/2.25 = 0.3333

Now we can solve for the partial pressures:

PNH3 = 0.5556 x Ptotal

PNH3 = 0.5556 x Ptotal = 0.5556 x (440 torr + PN2 + PKr)

PNH3 = 244.44 torr

PKr = 0.3333 x Ptotal

PKr = 0.3333 x Ptotal = 0.3333 x (440 torr + PN2 + PNH3)

PKr = 147.73 torr

So the total pressure is:

Ptotal = PCO + PNH3 + PKr

Ptotal = 440 torr + 244.44 torr + 147.73 torr

Ptotal = 832.17 torr

And the partial pressures of NH3 and Kr are 244.44 torr and 147.73 torr, respectively.

learn more about pressure here

https://brainly.com/question/28012687

#SPJ1

do you expect salicylic acid to be soluble in nahco3? what happens when a benzoic acid derivatives is reacted with a base such as nahco3? it may be beneficial to know that the pka of benzoic acid is 4.2 and the pka of h2co3 is 10.3.

Answers

When benzoic acid derivative, such as salicylic acid, is reacted with a base such as NaHCO₃, it undergoes acid-base neutralization reaction.

Salicylic acid is expected to be partially soluble in NaHCO₃ due to its acidic nature. Salicylic acid has a carboxylic acid group which can ionize in the presence of a base such as NaHCO₃ to form a salt that is partially soluble in water. However, the solubility of salicylic acid in NaHCO₃ will not be as high as that of a strong acid like HCl.

When a benzoic acid derivative, such as salicylic acid, is reacted with a base such as NaHCO₃, it undergoes acid-base neutralization reaction. The benzoic acid derivative reacts with the base to form a salt and water. The salt formed is usually more polar and more soluble in water than the original benzoic acid derivative.

Reaction will be represented by the following equation; Benzoic acid derivative (acid) + NaHCO₃ (base) → Salt (more polar) + H₂O

In the case of salicylic acid, the reaction can be represented as;

C₆H₄(OH)COOH (salicylic acid) + NaHCO₃ (base) → C₆H₄(OH)COONa (sodium salicylate) + H₂O

The pKa value of benzoic acid is 4.2, which means that it is a weak acid and will react with a weak base like NaHCO₃ to form a salt. The pKa value of H₂CO₃ is 10.3, which means that it is a strong acid and will not react with a weak base like NaHCO₃.

To know more about benzoic acid here

https://brainly.com/question/28168596

#SPJ4

usnco when the substances are arranged in order of increasing boiling points, which order is correct?

Answers

#SPJ4

Full Question

usnco when the substances are arranged in order of increasing boiling points, which order is correct?

how does the 1hh nmr support he proposed structure based on chemicall shiftt assignmens and j values (coupling constants) of the aromaic hydrogen vanillin g

Answers

The 1H NMR spectrum supports vanillin's proposed structure through consistent chemical shift assignments and coupling constants of the aromatic hydrogen atoms.

1H NMR spectroscopy can uphold the proposed design of vanillin by giving data on the substance shift tasks and coupling constants of the fragrant hydrogen molecules. On account of vanillin, the normal compound shift of the fragrant hydrogen iotas is between 6.5-8.5 ppm, which is predictable with the noticed signs in the NMR range. The coupling constants between the sweet-smelling hydrogens can likewise be utilized to help the proposed structure, as they can give data on the replacement example of the fragrant ring.

In vanillin, the coupling steady between the ortho-hydrogens is normally bigger than that between the meta-hydrogens, which is reliable with the proposed replacement design. Generally speaking, the 1H NMR range can give important data on the compound construction of vanillin and backing the proposed structure in view of substance shift tasks and coupling constants of the fragrant hydrogen particles.

To learn more about chemical shift assignments, refer:

https://brainly.com/question/30598795

#SPJ4

what compound(s) are added to nacl to make it iodized salt? indicate if the compound(s) you identified are ionic or molecular compound(s).

Answers

The compound that is added to NaCl to make it iodized salt is potassium iodide (KI). Potassium iodide is an ionic compound. The iodine present in potassium iodide prevents goiter, which is a swelling of the thyroid gland due to iodine deficiency.

In many countries, the salt used for cooking is iodized with potassium iodide, sodium iodide, or potassium iodate to prevent iodine deficiency disorders. The primary compound that is added to NaCl to make it iodized salt is potassium iodide (KI).Potassium iodide (KI) is an ionic compound that is added to sodium chloride (NaCl) to produce iodized salt.

Iodine in the form of KI helps prevent goiter, which is the swelling of the thyroid gland caused by a lack of iodine. Many nations use iodized salt to prevent iodine deficiency disorders, and the iodization process typically involves the addition of potassium iodide, sodium iodide, or potassium iodate to NaCl.

To learn more about NaCl here:

https://brainly.com/question/1550455

#SPJ11

given the following value, is the starting material or product favored at equilibrium? select the single best answer. keq = 6.5 a. product
b. starting material

Answers

When the value of Keq is greater than 1, the equilibrium is shifted toward the products. Therefore, if Keq is equal to 6.5, the product is favored at equilibrium. Answer: a. product.

Keq is defined as the equilibrium constant for a chemical reaction. It is a measure of the extent to which the reaction proceeds to form products versus starting materials at equilibrium. When Keq is greater than 1, it indicates that the products are more stable and favored at equilibrium.

Conversely, when Keq is less than 1, it indicates that the starting materials are more stable and favored at equilibrium. When Keq is equal to 1, it indicates that the reaction is at equilibrium and there is an equal amount of products and starting materials present.

The correct answer is option a.

To know more about equilibrium refer to-

brainly.com/question/30807709#

#SPJ11

determine the ph of a solution when 25.2 ml of 0.028 m hno3 is mixed with 19.0 ml of a. 0.0140 m naoh.

Answers

The pH of the solution is 2.00.

To determine the pH of the solution, we need to first calculate the moles of HNO₃ and NaOH in the solution, and then determine the amount of excess H⁺ or OH⁻ ions in the solution after the acid-base reaction is complete.

Balanced chemical equation for the reaction between HNO₃ and NaOH is;

HNO₃ + NaOH → NaNO₃ + H₂O

From this equation, we can see that one mole of HNO₃ reacts with one mole of NaOH to produce one mole of water and one mole of NaNO₃.

The moles of HNO₃ in the solution can be calculated as follows:

moles HNO₃ = concentration x volume = 0.028 mol/L x 0.0252 L = 0.0007056 mol

The moles of NaOH in the solution can be calculated as follows

moles NaOH = concentration x volume = 0.0140 mol/L x 0.0190 L = 0.000266 mol

Since the reaction between HNO₃ and NaOH is a 1:1 reaction, the moles of HNO₃ in excess can be calculated by subtracting the moles of NaOH from the moles of HNO₃

moles HNO₃ in excess = moles HNO₃ - moles NaOH = 0.0007056 mol - 0.000266 mol = 0.0004396 mol

The volume of the final solution is the sum of the volumes of HNO₃ and NaOH

volume of final solution = 25.2 mL + 19.0 mL = 44.2 mL = 0.0442 L

The concentration of excess HNO₃ can be calculated as;

concentration of HNO₃ in excess = moles HNO₃ in excess / volume of final solution

concentration of HNO₃ in excess = 0.0004396 mol / 0.0442 L = 0.00993 M

The excess H⁺ ions from HNO₃ will react with the OH⁻ ions from NaOH, leaving an excess of H⁺ ions in the solution. The amount of excess H⁺ ions in the solution can be calculated as;

moles of excess H⁺ ions = moles HNO₃ in excess = 0.0004396 mol

The total volume of the solution is 0.0442 L. Therefore, the molarity of H⁺ ions in the solution can be calculated as;

Molarity of H⁺ ions = moles of excess H⁺ ions / total volume of solution

Molarity of H⁺ ions = 0.0004396 mol / 0.0442 L = 0.00993 M

The pH of the solution can be calculated as follows:

pH = -log[H⁺]

pH = -log(0.00993)

pH = 2.00

To know more about acid-base reaction here

https://brainly.com/question/10224396

#SPJ4

select all products obtained when 3,3,6-trimethylcyclohexene is treated with nbs and irradiated with uv light.

Answers

When 3,3,6-trimethylcyclohexene is treated with NBS and irradiated with UV light, all the products obtained are given below:Br2 → NBS and hν → BrNSBS = N-bromosuccinimide1-bromo-3,3,6-trimethylcyclohexene → Cyclohexene molecule (elimination of HBr) + HBr → 3,3,6-trimethylcyclohexene

To produce a cyclic bromide, the addition of NBS to 3,3,6-trimethylcyclohexene is required. Bromine is unable to add to an alkene in a syn way.

Addition would be anti if NBS was used. The result is a cyclic bromide as a result of the bromination.

N-bromosuccinimide (NBS) is used to brominate alkenes at room temperature instead of molecular bromine. Instead of bromine, NBS is used to brominate alkenes because it has a high affinity for bromine, allowing it to deliver it to the alkene without having to add a catalyst.

The main reaction between 3,3,6-trimethylcyclohexene and NBS under UV light is 1-bromo-3,3,6-trimethylcyclohexene plus HBr.

The reaction is performed in the presence of ultraviolet light. The reaction takes place in the presence of a radical initiator (UV light). As a result, 3,3,6-trimethylcyclohexene is changed into 1-bromo-3,3,6-trimethylcyclohexene plus HBr (hydrogen bromide).

Therefore, the products obtained when 3,3,6-trimethylcyclohexene is treated with NBS and irradiated with UV light are 1-bromo-3,3,6-trimethylcyclohexene and HBr.

To know more about bromination refer to-

brainly.com/question/28938775#
#SPJ11

Select the best claim
Responses

The storm happened because cold low pressure air mass meets a warmer, higher pressure air mass.
The storm happened because cold low pressure air mass meets a warmer, higher pressure air mass.

The storm happened because a cold air mass was colliding with a warm air mass creating a front.
The storm happened because a cold air mass was colliding with a warm air mass creating a front.

The storm happened because a cold air mass was colliding with a cold air mass reaching equilibrium quickly.
The storm happened because a cold air mass was colliding with a cold air mass reaching equilibrium quickly.

The storm happened because a warm air mass was colliding with a warm air mass reaching equilibrium slowly.

Answers

The best claim is: The storm happened because a cold air mass was colliding with a warm air mass creating a front.

The best explanation is "The storm occurred as a result of a front being formed by the collision of a cold air mass and a warm air mass." This assertion is confirmed by the observation that cold and warm air don't mix right away when they come into contact. Instead, the two air masses form a boundary known as a front when the colder, denser air mass passes beneath the warmer one. Storms may arise as a result of the movement and interaction of these air masses at the front. In contrast to the other possibilities, this assertion provides a more thorough description of the atmospheric circumstances that can result in the genesis of a storm.

Learn more about storm here:

https://brainly.com/question/11163773

#SPJ1

a meal providing 1200 kcalories contains 10 g of saturated fats, 14 g of monounsaturated fats, and 20 g of polyunsaturated fats. what is the percentage of energy supplied by the lipids?

Answers

The lipids in the meal provide 33% of the total energy.

To calculate the percentage of energy supplied by the lipids in the meal, we need to know the total number of calories provided by the lipids. Since 1 gram of fat provides 9 calories of energy, we can calculate the total number of calories provided by the different types of fats in the meal as follows;

Total calories from saturated fats = (10 g) x (9 kcal/g) = 90 kcal

Total calories from monounsaturated fats = (14 g) x (9 kcal/g) = 126 kcal

Total calories from polyunsaturated fats = (20 g) x (9 kcal/g) = 180 kcal

The total number of calories provided by the lipids in the meal is therefore; Total calories from all fats = 90 kcal + 126 kcal + 180 kcal = 396 kcal

To calculate the percentage of energy supplied by the lipids, we can divide the total number of calories provided by the lipids by the total number of calories in the meal and then multiply by 100

Percentage of energy supplied by lipids = (396 kcal / 1200 kcal) x 100% = 33%

Therefore, the percentage of energy supplied by lipids will be 33%.

To know more about lipids here

https://brainly.com/question/3498396

#SPJ4

which of the following salts will be substantially more soluble in acidic solution than in pure water? (multiple answers are possible., choose all that apply. points deducted for incorrect choices. minimum score of zero.) group of answer choices pbcl2 al(oh)3 ba3(po4)2 agi fes hg2br2

Answers

Option A). The salts that will be substantially more soluble in an acidic solution than in pure water are PbCl₂, Al(OH)₃, and FeS.

1. Look for salts containing anions that can react with H+ ions from acidic solutions, making them more soluble. These anions include Cl-, OH-, S₂-, and PO₄₃-.
2. From the given choices, identify the salts containing these anions:
  - PbCl₂ (contains Cl-)
  - Al(OH)₃ (contains OH-)
  - Ba₃(PO₄)₂ (contains PO₄₃-)
  - FeS (contains S₂-)
3. Consider the cations' ability to form soluble complexes with the anions. Al₃+ and Fe₂+ can form soluble complexes with OH- and S₂-, respectively, while Pb₂+ can form soluble complexes with Cl-.
4. Based on this analysis, the salts that will be more soluble in acidic solutions are:
  - PbCl₂
  - Al(OH)₃
  - FeS

For more such questions on salts

brainly.com/question/13818836

#SPJ11

Avogadro's principle, the coefficients in chemical equations involving only gases represent two types of quantities. Name the two quantities

Answers

The coefficients in chemical equations involving only gases represent two types of quantities: Stoichiometric coefficients and Volume coefficients.

The term "molar ratio" means what exactly?

As a balanced chemical reaction, the ratio of any two compounds' mole amounts—measured in moles—is known as the mole ratio. In the balancing chemical equation, the proportions of the molecules required to accomplish the reaction are compared.

Stoichiometric coefficients: These coefficients represent the relative numbers of molecules or moles of the reactants and products in the balanced chemical equation. They indicate the ratio in which the reactants combine and the products are formed.

Volume coefficients: These coefficients represent the volumes of gases involved in the reaction at constant temperature and pressure, according to Avogadro's principle. The volumes of gases involved in a chemical reaction are directly proportional to the number of moles of gases involved, as well as to the coefficients in the balanced chemical equation.

To know more about Molar ratio visit:

brainly.com/question/17920577

#SPJ1

if we wanted to improve our set-up, we could have added a desiccant between two cotton plugs. why is this much better than adding drying agents such as na2so4 directly into the solution?

Answers

Using a desiccant between two cotton plugs is better than adding drying agents directly into the solution because it helps to remove moisture from the air and avoids the risk of uneven distribution and contamination.

A desiccant is a material that absorbs moisture from the air, and it can be placed between two cotton plugs to help remove any remaining moisture in a solution. This can be more effective than adding drying agents, such as Na₂SO₄, directly into the solution because the desiccant can remove moisture from the air as well as the solution.

When drying agents are added directly to a solution, they may not be evenly distributed, which can lead to localized areas of high concentration that can affect the purity of the solution. Additionally, if the drying agent is not properly filtered out, it can contaminate the solution.

To know more about drying agent, here

brainly.com/question/2650481

#SPJ4

a flask contains 2.838 m formic acid and 1.913 m formate anion. these two chemicals are a conjugate acid/base pair that should be able to form a buffer. if formic acid has a 298 k value for ka of 1.85x10-4, what is the ph of the solution in this flask?

Answers

The pH of the buffer solution given in the flask containing 2.838 m formic acid and 1.913 m Formate anion is 3.56.

The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

where pKa is the acid dissociation constant of formic acid (HCOOH) which is 1.85x10⁻⁴ at 298 K1, [A⁻] is the concentration of Formate anion (HCOO⁻) and [HA] is the concentration of formic acid (HCOOH).

The molarity of formic acid in the flask is 2.838 M and that of Formate anion is 1.913 M.

Since these two chemicals are a conjugate acid/base pair that should be able to form a buffer, we can assume that all of the formic acid will dissociate into H⁺ and HCOO⁻ ions.

Therefore,

[HCOO⁻] = 1.913 M and

[H⁺] = 1.85x10⁻⁴ × 2.838 / 1.913

= 2.75 x 10⁻⁴ M.

Taking -log[H⁺] gives us pH:

= -log(2.75 x 10⁻⁴) = 3.56.

Therefore, the pH of the solution in this flask is 3.56.

To know more about a buffer solution, refer:

https://brainly.com/question/27371101

#SPJ4

predict how changing the partial pressure of carbon dioxide will affect the ph and concentration of bicarbonate ions in the plasma

Answers

The concentration of bicarbonate ions in the plasma is dependent on the partial pressure of carbon dioxide (pCO2) according to the below equilibrium reaction and a mechanism that helps regulate the acid-base balance of the body.

The equation is CO2 + H2O ⇌ H2CO3 ⇌ HCO3- + H+

This reaction is catalyzed by the enzyme carbonic anhydrase, which is present in red blood cells. An increase in pCO2 will shift the equilibrium to the right, increasing the concentration of carbonic acid (H2CO3), which will increase the concentration of bicarbonate ions (HCO3-) and hydrogen ions (H+) in order to maintain the equilibrium.

As hydrogen ions increase, the pH of the plasma will decrease. Therefore, an increase in pCO2 will lead to a decrease in pH and an increase in the concentration of bicarbonate ions in the plasma. Conversely, a decrease in pCO2 will shift the equilibrium to the left, decreasing the concentration of bicarbonate ions and increasing the pH of the plasma.

Learn more about Carbon dioxide here:

https://brainly.com/question/3049557

#SPJ4

2. The approximate concentration of hydrochloric acid, HCl, in the stomach (stomach acid) is 0.17M. Calculate the mass of the following antacids required to neutralize 50cm of stomach acid. (a) Bicarbonate of soda NaHCO3 (b) Aluminum hydroxide, Al(OH)3 Please .​

Answers

A- approximately 0.714 g of NaHCO3 is required to neutralize 50 mL of 0.17 M HCl. b- approximately 0.221 g of Al(OH)3 is required to neutralize 50 mL of 0.17 M HCl.

(a) Bicarbonate of soda, NaHCO₃, reacts with hydrochloric acid, HCl, to produce sodium chloride, NaCl, water, and carbon dioxide gas, CO₂, according to the balanced chemical equation:

NaHCO₃(s) + HCl (aq) → NaCl (aq) + H₂O (l) + CO₂ (g)

From the balanced equation, the stoichiometry of the reaction is 1 mole of NaHCO₃ reacts with 1 mole of HCl. The molar mass of NaHCO₃ is 84.01 g/mol.

To calculate the mass of NaHCO₃ required to neutralize 50 mL of 0.17 M HCl, we need to first calculate the number of moles of HCl in 50 mL of the solution:

0.17 M = 0.17 mol/L

Number of moles of HCl in 50 mL = (0.17 mol/L) x (0.050 L) = 0.0085 mol

Since 1 mole of NaHCO₃ reacts with 1 mole of HCl, we need 0.0085 moles of NaHCO₃ to neutralize the acid. Therefore, the mass of NaHCO₃ required is:

Mass of NaHCO₃ = 0.0085 mol x 84.01 g/mol = 0.714 g

(b) Aluminum hydroxide, Al(OH)₃, reacts with hydrochloric acid, HCl, to produce aluminum chloride, AlCl₃, water, and heat, according to the balanced chemical equation:

Al(OH)₃ (s) + 3 HCl (aq) → AlCl₃ (aq)

From the balanced equation, the stoichiometry of the reaction is 1 mole of Al(OH)₃ reacts with 3 moles of HCl. The molar mass of Al(OH)₃ is 78.00 g/mol.

To calculate the mass of Al(OH)₃ required to neutralize 50 mL of 0.17 M HCl, we need to first calculate the number of moles of HCl in 50 mL of the solution, as we did in part (a):

Number of moles of HCl in 50 mL = 0.0085 mol

Since 1 mole of Al(OH)₃ reacts with 3 moles of HCl, we need 0.0085/3 = 0.00283 moles of Al(OH)₃ to neutralize the acid. Therefore, the mass of Al(OH)₃ required is:

Mass of Al(OH)3 = 0.00283 mol x 78.00 g/mol = 0.221 g

Learn more about mass here:

https://brainly.com/question/17067547

#SPJ1

(science)
2. In your own words, explain the following terms using complete sentences:

a. Biosynthesis

s. Selectively permeable

c. Cell response

d. Absorption

3. Describe the cell structure of a typical plant cell. Give the function of each part of the cell structure.

4. Describe the cell structure of a typical animal cell. Give the functions of each part of the cell structure.

Answers

a) Biosynthesis, like cellular metabolism, is the production of natural compounds via enzymatic reactions. b) Cellular metabolism is the process by which cells convert nutrients and oxygen into energy, a process known as cellular respiration.

What is cellular metabolism?

Cellular metabolism is the process by which cells convert nutrients and oxygen into energy, a process known as cellular respiration. Specifically, cellular metabolism involves the breakdown of sugar molecules (glucose) for energy, the production of the molecule ATP (adenosine triphosphate), and the exchange of molecules between cells.

A selectively permeable membrane is one that permits only certain substances and molecules to enter or exit the cell. The cell membrane is an illustration of a selectively permeable membrane. It permits only certain types of molecules to pass through diffusion and, on rare occasions, facilitated diffusion.

Cell response is the way a cell responds to a change in the environment. A cell response could be a physical change such as a change in shape or movement, or a chemical change such as a change in metabolism or the production of proteins or hormones. Cells process stimuli from the environment, either through receptors on the cell surface or internal signaling proteins. Once a response is triggered, cells can undergo various responses at the molecular, cellular, or organismal level. For example, when a foreign antigen is detected, a cell response can trigger an immune response such as inflammation. Alternatively, a cell response can be triggered by a hormone, which can induce cell differentiation or cell death.

Absorption is the process by which the digestive products are absorbed by the blood and distributed to the remainder of the body. The digested products are transported into the blood or lymph via the mucous barrier during absorption.

What is  the cell structure of a typical plant cell?

A typical plant cell consists of a cell wall (provides structure and protection), a plasma membrane (regulates what enters and leaves the cell), a nucleus (controls the cell's activities), cytoplasm (houses cellular organelles and dissolved materials), vacuoles (stores materials), and chloroplasts (site of photosynthesis).

A typical animal cell is made of a nucleus, cytoplasm, cell (plasma) membrane, mitochondria, and endoplasmic reticulum. The nucleus contains DNA and is the control centre of the cell; the cytoplasm is a jelly-like substance that contains salts, proteins, and enzymes; the cell membrane is a thin barrier controlling the exchange of materials between the inside and outside of the cell; the mitochondria are the 'powerhouse' of the cell, producing energy; and the endoplasmic reticulum is a series of folded membranes that assist in protein synthesis and transport.

To know more about inflammation , visit ;

https://brainly.com/question/608378

#SPJ1

what volume of hcl gas is produced by the reaction of 2.4 liters of h2 gas with 1.5 liters of cl2 gas? (volumes are at the same t and p.)

Answers

Answer:

The balanced equation for the reaction is:

H2(g) + Cl2(g) → 2HCl(g)

According to the equation, 1 mole of H2 reacts with 1 mole of Cl2 to produce 2 moles of HCl. So, the number of moles of HCl produced in the reaction is twice the number of moles of either H2 or Cl2 consumed.

To find the number of moles of H2 and Cl2 consumed, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming the temperature and pressure are constant, we can rearrange the ideal gas law to solve for n:

n = PV/RT

Using the given volumes, we can calculate the number of moles of H2 and Cl2:

n(H2) = (2.4 L) / (22.4 L/mol) = 0.107 mol

n(Cl2) = (1.5 L) / (22.4 L/mol) = 0.067 mol

Since the reaction consumes H2 and Cl2 in a 1:1 ratio, the limiting reactant is Cl2, which means that all of the H2 will react and all of the Cl2 will be consumed.

So, the number of moles of HCl produced is:

n(HCl) = 2 × n(Cl2) = 2 × 0.067 mol = 0.134 mol

To find the volume of the HCl gas produced, we can use the ideal gas law again:

V = nRT/P

Assuming the temperature and pressure remain constant, we can solve for V:

V = n(HCl) × R × T / P

Substituting the values and solving, we get:

V = (0.134 mol) × (0.0821 L·atm/mol·K) × (298 K) / (1 atm) = 3.30 L

Therefore, the volume of HCl gas produced is 3.30 liters.

The reaction between 2.4 litres of H2 gas and 1.5 litres of Cl2 gas (volumes at the same T and P) results in the production of 3 litres of HCl gas.

Avogadro's law states that all gases at the same temperature, pressure, and volume contain the same number of particles (or molecules), regardless of their chemical nature or physical properties. According to the balanced chemical equation given below, 1 mol H2 reacts with 1 mol Cl2 to produce 2 mol HCl.H2 (g) + Cl2 (g) → 2HCl (g) Let us calculate the moles of H2 and Cl2 gas in the given equation. n (H2) = 2.4 L × (1 mol/22.4 L) = 0.107 mol n(Cl2) = 1.5 L × (1 mol/22.4 L) = 0.067 mol From the chemical equation above, we know that the H2 and Cl2 gases react in a 1:1 ratio, which means that 0.067 mol of Cl2 gas can react with 0.067 mol of H2 gas. So, according to Avogadro's Law, we know that when 1 mol of H2 gas combines with 1 mol of Cl2 gas, 1 mol of HCl gas is created. 0.067 mol of H2 gas will therefore result in 0.067 mol of HCl gas. Since 1 mole of any gas at STP occupies 22.4 L of volume, then 0.067 mol of HCl gas will occupy 0.067 mol × 22.4 L/mol = 1.50 L of volume. Hence, 1.50 L of HCl gas is created when 2.4 L of H2 gas reacts with 1.5 L of Cl2 gas (volumes at the same T and P).

To know more about HCl click here:

brainly.com/question/28303188

#SPJ11

Other Questions
(Need help please and thank you!) how many grams of cs2(g) can be prepared by heating 9.80 mol s2(g) with excess carbon in a 5.75 l reaction vessel held at 900 k until equilibrium is attained? Which evidence card provides the most useful evidence about temperature?a.Evidence Card A: May 1991-August 1991b. Evidence card B: January 1991-December 1995c.Evidence card C: 1980-2010 the reason that setting difficult and specific goals lead to consistent high performance does not include that it encourages the individual to at higher temperature, will you collect more volume of gas or less volume, with the same amount of reactants? which type of signaling is long-distance signaling mediated by chemicals released into the blood? bio 180 QuestionIn ABC, AB=7.8 ft, BC=10.7 ft, and mB=27.What is the area of ABC?Enter your answer as a decimal in the box. Round only your final answer to the nearest hundredth. ft The raising of only one crop or product without using the land for other purposes is sedentary O nomadic monoculture expansion walter bought a 21 pound bag of flour. he used 4.2 pounds of flour What are the ordered pair solutionsfor this system of equations?y = -x + 2y = xFirst, set the equations equal to each other andmove everything to one side.A:-x+x+2=0C:-x + 2 = xB:x+x-2 = 0D:x+x+2=0 which of the following is a source of market risk? a. holding stocks in many companies carries the risk of a reduced average return. b. if stockholders become aggravated with the way a ceo runs a company, the price of that company's stock might fall in the stock market. c. real gdp varies over time and sales and profits move with real gdp. d. when a paper producer has declining sales, it is likely that so will other paper producers. as an employee, would you prefer to participate in a defined-benefit pension plan or a defined-contribution pension plan? explain your answer. if you are a risk-averse person and plan to stay in the same job for a significant portion of your working life, you may prefer a defined-benefit plan. the longer you work for a company, the higher the pension benefits and your employer bears the risks associated with the assets in which the pension contributions are invested. if you plan to change jobs regularly and are confident about making investment decisions about your retirement savings, you may prefer a defined-contribution plan. If you bet $5 in a Pick 4 lottery game, you either lose $5 or gain $9,995. (The winning prize is $10,000, but your $5 bet is not returned, so the net gain is $9,995.) The game is played by selectinga four-digit number between 0000 and 9999. What is the probability of winning? If you bet $5 on 1234, what is the expected value of your gain or loss? What is the probability of winning? a firm offers terms of 1/10, net 30. what effective annual interest rate does the firm earn when a customer does not take the discount? without doing any calculations, explain what will happen to this effective rate if: Which was a result of the efforts of the civil rights movement?racial prejudice abolishedsegregated neighborhoods eliminatedurban poverty eliminated wider job opportunities for African Americans temporary elements often identified as aspects of love include all of the following except group of answer choices commitment. euphoria. preoccupation. idealization. Which correctly describes how to determine the measure of angle 1?2 parallel lines are crossed by a transversal to form 8 angles. Clockwise from top left, the angles are 105 degrees, blank, blank, blank; blank, blank, 2, 1.The 105 angle and angle 2 are alternate exterior angles so angle 2 must measure 105. Angles 1 and 2 are supplementary angles so angle 1 must measure 75.The 105 angle and angle 2 are corresponding angles so angle 2 must measure 105. Angles 1 and 2 are supplementary angles so angle 1 must measure 75.The 105 angle and angle 2 are alternate exterior angles so angle 2 must measure 75. Angles 1 and 2 are supplementary angles so angle 1 must measure 105.The 105 angle and angle 2 are corresponding angles so angle 2 must measure 75. Angles 1 and 2 are supplementary angles so angle 1 must measure 105. recall the use of data from the national health survey to estimate behaviors such as alcohol consumption, cigarette smoking, and hours of sleep for all u.s. adults. in the 2005-2007 report, they estimated that 30% of all current smokers started smoking before the age of 16. suppose that we randomly select 100 u.s. adults who are smokers and find that 25% of this sample started smoking before the age of 16 (an error of 5% compared to the 2005-2007 report). is this much error surprising? find the probability that a sample proportion will be an over- or underestimate of the parameter by more than 5%. Most animals avoid eating monarch butterflies due to their bad taste. Viceroy butterflies look very similar to the monarchs.Which of these best explains how the viceroy butterfly benefits from looking like the monarch butterfly?A.Viceroy butterflies are able to reproduce with the monarch butterflies.B.Viceroy butterflies are able to deter predators in the same way as the monarch butterflies.C.Viceroy butterflies are able to follow the migratory patterns of the monarch butterflies.D.Viceroy butterflies are able to find additional sources of food used by the monarch butterflies. benchmarking in the hotel industry takes place at what level? group of answer choices property level for an individual hotel versus their competitive set corporate level for a hotel company, for example one brand versus others geographic level for tourism organizations, for example city versus comparable cities all of the above levels