A 250mL sample of oxygen is collected over water at 30 C and 850 torr pressure. What is the pressure of the dry gas alone?

An empirical formula is a type of chemical formula that shows the simplest ratio of elements present in a compound, rather than the total number of atoms.

What are Atoms?

Atoms are the smallest indivisible particles that make up all matter in the universe. They consist of a nucleus containing protons and neutrons, surrounded by a cloud of electrons. Atoms make up all elements, which are the building blocks for all other forms of matter.

Step 1: Calculate the atomic mass of carbon, hydrogen, oxygen, and nitrogen.

Carbon: 12.011 g/mol

Hydrogen: 1.008 g/mol

Oxygen: 15.999 g/mol

Nitrogen: 14.007 g/mol

Step 2: Convert the mass of each element to moles.

Carbon: 83.884 g / 12.011 g/mol = 6.983 mol

Hydrogen: 10.486 g / 1.008 g/mol = 10.381 mol

Oxygen: 18.640 g / 15.999 g/mol = 1.164 mol

Nitrogen: (200.00 g - (83.884 g + 10.486 g + 18.640 g)) / 14.007 g/mol = 6.871 mol

Step 3: Divide each mole value by the smallest mole value to obtain the simplest whole number ratio.

Carbon: 6.983 mol / 6.983 mol = 1

Hydrogen: 10.381 mol / 6.983 mol = 1.485

Oxygen: 1.164 mol / 6.983 mol = 0.167

Nitrogen: 6.871 mol / 6.983 mol = 0.985

The empirical formula of the compound is CHNO.

To know more about atoms,

https://brainly.com/question/16666188

#SPJ4

Answer:

4400, and 0

Explanation:

since they traveled 2200 in one direction, to return home they must travel that distance again, so they travel 4400

displacement is the distance from the start point, so since they are back home at the end of the trip, they did not get displaced at all

if you have any questions, leave them in the comments and i will try to answer them, if this helped, pls give brainliest

Answer:

My answer to the question is 4400 and 0

Answer:

added to what? base? if its added to base then it will increase in pH. H2S04(sulphuric acid is strong) so the pH is ard 3

The dominant phenotype for sheep color is wool because it is the most common color seen in sheep.

What do you mean by Phenotype?

Phenotype is the physical, biochemical, and physiological characteristics of an organism, as determined by both genetic makeup and environmental influences. It is the physical expression of an organism's genes, and can be seen in its morphology, development, and behavior.

Wool is usually white or off-white in color and is the result of a dominant gene. The recessive phenotype for sheep color is non-wool, which is usually a darker color, such as black, brown, or gray. This is the result of a recessive gene and is less common than the dominant gene.

To know more about Phenotype,

https://brainly.com/question/902712

#SPJ4

The life cycle of a star the size of our sun starts with a nebula, a huge cloud of dust and gas. The gravity of the nebula compresses the cloud until the atoms fuse together, creating a star. This stage is known as pre-birth.

Next, the star enters a main sequence phase, where it shines brightly for millions of years, powered by nuclear fusion.

Eventually the star will slowly run out of hydrogen and the fusion process will become less and less efficient. The star will expand and become what is known as a red giant. This marks the end of the main sequence phase.

After this point, the star expels its outer layers, leaving behind a small, hot core called a white dwarf. It will continue to cool down until it becomes a black dwarf.

If the star is at least 5 times bigger than our sun, it will enter a different life cycle. After the red giant phase, the star will undergo a supernova explosion, which will spew dust and gas into the surrounding areas. These remainders will later form new stars, planets, and other cosmic bodies. What's left of the star will become a neutron star or a black hole.

Some examples of evidence that support Darwin's theories of evolution and natural selection , such as fossils and similarities between related living organisms.

Darwin employed certain sorts of evidence to support his hypothesis of natural selection, and these types of evidence are still used today. Examples include fossils and similarities between related living animals. Others, like DNA analysis, were unavailable to Darwin's generation but are now employed by scientists to further our understanding of evolution.  evidence supporting evolution: fossil strata, remains of extinct organisms, similarities between current-day organisms, DNA similarities, and embryonic similarity. Artificial selection, or breeding, is a crucial sort of evidence that Darwin looked at and is being looked at and employed today.

Learn more about  Darwin's theories of evolution .

brainly.com/question/25718754

#SPJ4

Answer & Explanation:

It is NOT POSSIBLE to determine a person's genotype if that person presents the dominant trait

When the arrangement of atoms changes in a substance, the properties of the substance can change as well. The different arrangements of atoms can lead to different chemical and physical properties.

For example, if the atoms of a substance are rearranged to form a new compound, the new compound will have different chemical properties than the original substance. A new compound may have a different color, odor, reactivity, or melting point than the original substance.

Changing the arrangement of atoms without changing the chemical composition can change the physical properties. For example, a crystalline solid has atoms or molecules arranged in a regular, repeating pattern. This arrangement gives the material unique properties such as density, melting point, and hardness. If the arrangement of atoms and molecules changes, the properties of solids can also change.

In summary, when the arrangement of atoms in a substance changes, the properties of the substance can also change. Different arrangements of atoms have different chemical and physical properties.

Learn more about the arrangement of atoms here:https://brainly.com/question/2607944

#SPJ4

Answer:

The answer is C.

Explanation:

Answer:

C is right i yeah C is right

Answer:

0.0272 moles

Explanation:

The number of moles of acid that were neutralized can be found by multiplying the volume of the base (in liters) by its concentration (in moles/liter) and then multiplying that value by the stoichiometric coefficient of the acid in the balanced chemical equation for the neutralization reaction.

To begin, we need to convert the volume of the base from milliliters to liters.

50.40 mL = 0.0504 L

Next, we can multiply the volume of the base (in liters) by its concentration (in moles/liter) to find the number of moles of base used in the titration.

0.0504 L * 0.542 M = 0.0272 moles

Since this is a neutralization reaction between a monoprotic acid and a strong base, the acid:base ratio is 1:1.

So the acid that has been neutralized is also 0.0272 moles.

In the box on a periodic table  we can find its atomic number, symbol, average atomic mass, and (sometimes) name of the element.

By the 20th century, it was clear that atomic numbers, not atomic masses, were involved in the periodic relationship. The periodic law, a more recent formulation of this relationship, states that an element's properties are a periodic function of its atomic number.

The elements are arranged in a modern periodic table in increasing order of their atomic numbers, and atoms with comparable properties are grouped in the same vertical column (Figure below). With its atomic number, symbol, average atomic mass, and (sometimes) name, each box represents an element. The elements are grouped in 18 vertical columns called groups and seven horizontal rows known as periods or series.

Each column's header lists the names of its groups. Roman numerals and capital letters have traditionally been used on labels in the United States. The IUPAC advises using the digits 1 through 18, and these labels are more widely used. Parts of two of the rows, totaling 14 columns, are typically written below the table's main body in order for it to fit on a single page.

Learn more about periodic table at https://brainly.com/question/11155928

#SPJ4

Answer:

the molar mass of (NH4)3PO4 is 149.09 g/mol

Explanation:

14) We need to find the # of moles of NaOH in 3.5 L solution. Note: 1 M = 1 mol/Ll

(3.00 mol NaOH/1 L)(3.5 L) = 10.5 mol NaOH

Next we need find the volume of 19.4M NaOH solution that contains 10.5 mol NaOH:

(10.5 mol NaOH)×(1 L NaOH/19.4 mol NaOH)

= 0.541 L NaOH

This means that 0.541 L (541 mL) of 19.4M NaOH solution must be diluted to 3.5 L in order to get 3.00M NaOH solution.

15) 425 mL (0.425 L) of 0.105M HCl solution contains

(0.105 mol HCl/1 L)×(0.425 L) = 0.0446 mol HCl

so when enough water is added to 1L, the molarity becomes

0.0446 mol HCl/1 L = 0.0446M HCl

16) CaBr2 ---> Ca^+2 + 2Br^-1

For every Ca^+2 ion in the solution, you have 2 Br^-1 ions

If the concentration of CaBr2 is 6 mol/L (or 6M),.then the concentration of Br^-1 irons is

[Br^-1] = 2×[Ca^+2] = 2×(6 mol/L) = 12 mol Br^-1/L

17) The reason you won't need 1.0 L of water is that part of the volume of the solution is taken up by the NaOH so you will always need slightly less than 1 L.

Answer:

Which one do you need the answer to?

Explanation:

Answer:

20 meters

Explanation:

The bike is moving at a rate of 4 meters per second. In 5 seconds, the bike would have gone 20 meters

4 m/s x 5s = 20 m

Answer:

20 miles

Explanation:

The freezing point of the solution after you add an additional 1.34 g is -0.808°C.

A solution's freezing point is lower than the pure solvent's freezing point. This means that for freezing to happen, a solution needs to be cooled to a lower temperature than the pure solvent.

We use the equation: to determine the mass of the solution

Density = mass/volume

1.05 g/ml = mass/ 50ml

mass = 1.05×50

mass = 52.5g.

Percentage of magnesium chloride in the solution is 1.52%

Mass of magnesium chloride in the solution = 1.52 % of 52.5 g

Mass of magnesium chloride in the solution = 1.52/100×52.5

Mass of magnesium chloride in the solution = 0.798g

The following equation is used to determine depression in freezing point:

ΔTf = Freezing point of pure solution - Freezing point of solution

ΔTf = i Kf m

Freezing point of pure solution - Freezing point of solution = i Kf m

m =  m solute × 100/M solute × W solvent

Given values,

Freezing point of pure solution (water) is 0°C

i is Vant hoff factor = 2.5

Kf molal freezing point elevation constant = 1.86°C/m

m solute given mass of solute (magnesium chloride) = [0.798 + 1.34] g

m solute = 2.138 g

M solute molar mass of solute (magnesium chloride) = 95.2 g/mol

W solvent mass of solvent (water) = [52.5 - 0.798] g = 51.702 g

substitute the given values,

0 - Freezing point of solution = 1×1.86×2.138×1000/95.2×51.702

Freezing point of solution = -0.808°C.

To know more about freezing point visit:

https://brainly.com/question/14825265

#SPJ4

Complete question is " A 50 mL solution is initially 1.52% MgCl₂ by mass and has a density of 1.05 g/ml

What is the freezing point of the solution after you add an additional 1.34 g MgCl₂? (Use i = 2.5 for MgCl₂)."

When a 211-mL sample of a 0.285 M CaCl₂ solution is left on a hot plate overnight and the following morning, the solution is 1.25 M, the volume of water evaporated from the 0.285 M CaCl₂ solution is 48.108 ml.

Molarity (M) is defined as the ratio of the number of moles of solute present in a solution to the volume of the solution in litres.

given here,

Molarity of the original solution(M₁) = 0.285M

Volume of the original solution(V₁) = 211 ml

Molarity of  the solution in the morning (M₂) = 1.25 M

Volume of the solution in the morning (V₂) = ?

We will calculate the volume of the solution in the morning by using the formula:

M₁ × V₁ = M₂ × V₂

⇒0.285 M× 211 ml = 1.25 M × V₂

⇒V₂ = 0.285 M× 211 ml / 1.25 M

⇒V₂= 48.108ml

The volume of water evaporated from the 0.285M CaCl₂ solution is 48.108 ml.

To know more about volume of water evaporated here

https://brainly.com/question/13220835

#SPJ4

Answer:

Separation by density

Hope this helps

Explanation:

Oogenesis can be defined as a process of differentiation of egg cell (ovum), into a mature ovum that further develops after fertilization. In humans, oogenesis begins in the early stage of embryonic development, during whcih primary oocyte performs meiosis I and forms secondary oocyte.

Answer:

1) in excess

Explanation:

Copper oxide is insoluble in water, while acid is soluble in water

Explanation:

frequency = 1 wave/10s = 0.1 Hz

wavelength = 5.8 m

speed = wavelength × frequency

= (5.8 m)(0.1 Hz)

= 0.58 m/s

The expression is  [tex]\frac{(h+2)}{4}[/tex] which can be solved by BODMAS rule

The abbreviation BODMAS, which stands for "Brackets, Order of powers or roots, Division, and Multiplication," is followed by the BODMAS rule. A stands for addition and S for subtraction. According to the BODMAS rule, multi-step mathematical statements must be solved in the BODMAS order from left to right. Similar to how Addition and Subtraction depend on which comes first in the sentence, Division and Multiplication are thought of as interchangeable operations.

The expression can be written as follows WE have 2 quantities h and 2

Their sum can be written as h+2 Now We have the sum divided by 4 so it can be written as : [tex]\frac{(h+2)}{4}[/tex]

Learn more about BODMAS rule

brainly.com/question/29795897

#SPJ4

Answer:

Molarity of a solution is defined as

the amount of a substance in a certain volume of solution or the moles of a solute per liters of a solution and also known as the molar concentration of a solution.

The units of molarity are M or mol/L

Define molarity of a solution.

Molar concentration or Molarity is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.

_____

-------☆ﾟ.･｡ﾟᵴɒƙυᴚᴀ_ƨȶäᴎ❀

Titration is a quantitative analysis method for determining the concentration of a substance from a measured titrant. According to the equation, if the reactants are halved, the amount of H2O produced will be halved.

The molecular equations for sodium hydroxide, hydrochloric acid, sodium chloride, and water can be expressed as:

 HCl + NaOH ⇒ NaCl + [tex]H_{2}[/tex]O

In the given equations, the spectator ions and the ionic equation can be distinguished as follows:

H⁺ + Cl⁻ Na⁺ + OH⁻ ⇒ Na⁺ + Cl⁻ + 2H⁺ + O⁻²

The net ionic equation is:

 H⁺ + OH⁻ ⇒ [tex]H_{2}[/tex]O

From the above equation, we can see that the production of water molecules depends on the number of reactants. The reactants are,

H⁺ and OH⁻.

Therefore, when the number of reactants is halved, the resulting water molecules are halved.

Learn more about reactants visit:

brainly.com/question/29035733

#SPJ4

Answer:

a) red, blue, and violet

b) orange, yellow, and green

C) red, orange, and yellow

D) blue, indigo, and violet​

Answer:92.1g

Explanation:

This means that the reaction consumed4.004moles NaCl⋅2 moles Na2moles NaCl=4.004 moles NaConvert this to grams by using the element's molar mass4.004moles Na⋅22.99 g1mole Na=92.1 g