The amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.
Before the collision:
- The first block
(mass m1 = 0.45 kg) is at its maximum extension
(amplitude A1 = 0.075 m) and has zero velocity.
-
The second block
(mass m2 = 0.45 kg) is moving at a velocity
v2 = 12 m/s and has no potential energy.
During the collision, the two blocks stick together
(mass m = m1 + m2 = 0.9 kg).
After the collision, the combined mass oscillates with a new amplitude A2.
Before collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA1^2
- Momentum of the system = m2 * v2
After collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA2^2
- Momentum of the system = m * v
Since mechanical energy and momentum are conserved:
- (1/2)kA1^2 = (1/2)kA2^2
- m2 * v2 = m * v
We know A1, m1, m2, and v2. We can solve the equations to find A2.
From the energy equation:
A2^2 = A1^2 * (m1 + m2) / m1 = (0.075^2) * (0.9 / 0.45) = 0.01125
A2 = sqrt(0.01125ou) ≈ 0.106 m
So, the amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.
To learn more about : Amplitude
https://brainly.com/question/3613222
#SPJ11
Answer:
85 cm
Explanation:
The speed of the blocks right after the collision is 6 m/s, so now we have an oscillator of mass 900.0 g with a speed of 6 m/s when x = 7.5 cm. The amplitude of this oscillator is 85 cm
A vertical spring scale can measure weights up to 215 n . the scale extends by an amount of 10.5 cm from its equilibrium position at 0 n to the 215 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.50 hz .
A fish weighing 0.045 kg is measured using a frequency of 2.50 Hz. Its weight is calculated to be 215 N using the spring constant and displacement of the scale.
Assuming the oscillations of the fish on the spring are simple harmonic, we can use the formula for the period of a simple harmonic oscillator to find the frequency of oscillation:
[tex]T = 1/f = 2\pi \sqrt{(m/k)}[/tex]
where T is the period, f is the frequency, m is the mass of the object, and k is the spring constant.
To find k, we can use Hooke's law, which states that the force exerted by a spring is proportional to the amount of stretch or compression:
F = -kx
where F is the force, k is the spring constant, and x is the displacement from the equilibrium position.
Using the information given in the problem, we can calculate the spring constant:
k = F/x
k = (215 N) / (0.105 m)
k = 2047.6 N/m
Then, we can use the formula for the period of oscillation to find the frequency:
[tex]T = 2\pi \sqrt{(m/k)}[/tex]
[tex]2\pi \sqrt{(m/k)} = 1/f[/tex]
[tex]f = 1 / [2\pi \sqrt{(m/k)}][/tex]
[tex]f = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
f = 2.5 Hz (as given in the problem)
Therefore, we can use the frequency of 2.50 Hz to calculate the mass of the fish:
[tex]2.50 = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
m = 0.045 kg
Finally, we can use the spring constant and the displacement of the scale to find the weight of the fish:
F = kx = (2047.6 N/m)(0.105 m) = 215 N
Therefore, the weight of the fish is 215 N.
To know more about frequency refer here:
https://brainly.com/question/29739263#
#SPJ11
A truck weighs 25,000 n, and its tires are inflated to a pressure of 200 kpa. what is the total area of the truck’s tires in contact with the road?
The total area of the truck's tires in contact with the road is 0.125 square meters.
To find the total area of the truck's tires in contact with the road, we can use the formula for pressure, which is pressure equals force divided by area. Rearranging this formula to solve for area, we get area equals force divided by pressure.
Using this formula, we can calculate the area of the truck's tires by dividing the weight of the truck by the pressure of the tires:
Area = 25,000 N / 200 kPa
Before we can calculate the area, we need to make sure that our units are consistent. We can convert kilopascals to pascals by multiplying by 1,000, so we get:
Area = 25,000 N / (200,000 Pa)
Simplifying this expression, we get:
Area = 0.125 [tex]m^{2}[/tex]
Therefore, the total area of the truck's tires in contact with the road is 0.125 square meters.
To know more about kilopascals, refer here:
https://brainly.com/question/30626869#
#SPJ11
What does a fission reaction require to be sustainable?.
A fission reaction requires three main components to be sustainable: a sufficient amount of fissile material, a moderator to control the reaction, and a method of removing heat generated during the reaction.
1. Fissile material: To sustain a fission reaction, there needs to be a sufficient amount of fissile material, such as uranium-235 or plutonium-239. These materials have nuclei that are more likely to split when struck by a neutron, releasing energy and more neutrons in the process.
The critical mass is the minimum amount of fissile material required to maintain a self-sustained chain reaction.
2. Moderator: A moderator is a substance that slows down the neutrons released during fission. This is crucial for sustaining the reaction, as slower neutrons are more likely to be captured by fissile material and induce further fission events. Common moderators include water, heavy water, and graphite.
3. Heat removal: During a fission reaction, a large amount of heat is generated due to the release of energy. In order to maintain a sustainable reaction, it's necessary to remove this heat, typically by transferring it to a coolant, such as water or gas.
The coolant circulates through the reactor core, absorbing heat, and then transfers the heat to a heat exchanger or directly to a steam generator for power production.
In summary, a sustainable fission reaction requires a sufficient amount of fissile material to maintain a chain reaction, a moderator to control the reaction by slowing down neutrons, and an effective method of removing heat generated during the reaction.
To know more about sustainable refer here
https://brainly.com/question/29355708#
#SPJ11
What is wind ? What type of energy is possessed by wind ? (b) Explain how, wind energy can be used to generate electricity. Illustrate your answer with the help of a labelled diagram. (c) State two advantages of using wind energy for generating electricity. (d) Mention two limitations of wind energy for generating electricity
a) Wind is the movement of air in the Earth's atmosphere. It occurs due to the uneven heating of the Earth's surface by the sun, resulting in the displacement of air from areas of high pressure to areas of low pressure. Wind can occur at various speeds and directions, and it plays a crucial role in weather patterns and climate.
b) Wind energy is a form of kinetic energy that is possessed by the movement of air molecules. This energy can be harnessed to generate electricity through the use of wind turbines.
The process of generating electricity from wind energy involves the following steps:
1. Wind turbines are installed in areas where there is a consistent and strong wind flow. These turbines consist of large blades that are connected to a rotor.
2. When wind flows over the blades, it causes the rotor to spin. The rotation of the rotor generates mechanical energy.
3. This mechanical energy is then converted into electrical energy through the use of a generator.
4. The electrical energy is then transmitted to a power grid, where it can be distributed to homes and businesses.
c) There are several advantages of using wind energy for generating electricity, including:
1. Renewable: Wind energy is a renewable resource, which means it is replenished naturally and can be used indefinitely without depleting natural resources.
2. Clean: Wind energy does not produce harmful pollutants or greenhouse gas emissions, making it a clean and environmentally friendly source of energy.
d) There are also limitations to using wind energy for generating electricity, including:
1. Variability: Wind energy is not a consistent source of energy, as wind speeds can vary depending on weather patterns and time of day. This can make it difficult to rely on wind energy as a sole source of electricity.
2. Land use: Wind turbines require a significant amount of land, which can be problematic in areas with limited space or where wildlife habitats may be affected.
To know more about Wind energy refer here
https://brainly.com/question/29293441#
#SPJ11
The fact that the strength of gravity decreases with distance means the force of gravity exerted by one object on another (e.g., the earth and moon) is greater on the near side than the far side. this effect is commonly referred to as a
This effect is commonly referred to as tidal forces. Tidal forces arise due to the differences in gravitational attraction across the length of an extended object.
In the case of the Earth-Moon system, the gravitational pull of the Moon on the near side of the Earth is greater than the pull on the far side.
This results in the deformation of the Earth's oceans, creating the familiar tidal bulges.
Tidal forces can also lead to tidal locking, where an object's rotation and orbital period become synchronized, as is the case with the Moon, which always shows the same face to the Earth.
Tidal forces are also important in the study of binary star systems, where they can cause significant changes in the orbits of the stars.
To know more about tidal forces, refer here:
https://brainly.com/question/6762160#
#SPJ11
An inflated car tyre is considered to have a constant volume, regardless of any changes in temperature
or pressure. Use the kinetic theory of gases to answer following.
a) How does the air in the tyre exert pressure on the walls of the tyre?
b) Why is the pressure the same at all points on the inside wall of a tyre?
c) What happens to the pressure on the inside walls of the tyre if the temperature of the air increases? Explain your answer.
d) More air is pumped into the tyre whilst the temperature is kept constant until there are twice as many molecules as before. Explain why you would expect the pressure to be doubled
a) The air in the tire consists of gas molecules that constantly move and collide with the walls of the tire. b) This leads to a uniform distribution of collisions and forces on the tire walls, ensuring constant pressure.
According to the kinetic theory of gases, gases are made up of tiny particles that are in constant random motion.
a) The air in the tire consists of gas molecules that constantly move and collide with the walls of the tire. These collisions exert a force on the tire walls, which over a given area, results in pressure.
b) The pressure is the same at all points on the inside wall of the tire because the gas molecules are evenly distributed and move in random directions. This leads to a uniform distribution of collisions and forces on the tire walls, ensuring constant pressure.
c) When the temperature of the air increases, the kinetic energy of the gas molecules also increases. This results in more forceful collisions with the tire walls, leading to an increase in pressure.
d) When the number of air molecules is doubled at a constant temperature, there will be twice as many collisions with the tire walls. This leads to a proportional increase in the force exerted, resulting in the pressure being doubled as well.
For more about gas molecules:
https://brainly.com/question/30597086
#SPJ11
Which statements describe a closed circuit? select three options. bulbs will shine. bulbs will not shine. the circuit is incomplete. the circuit is complete. charges flow. charges do not flow.
The statements describe a closed circuit: bulbs will shine, the circuit is complete, the circuit is complete.
A closed circuit can be described by the following three statements:
1. Bulbs will shine: In a closed circuit, the electrical components such as bulbs are connected in a complete loop, which allows the current to flow through them, causing the bulbs to shine.
2. The circuit is complete: A closed circuit has a continuous path for the charges to flow through. This means there are no breaks or gaps in the connections, allowing the current to move without interruption.
3. Charges flow: Since a closed circuit is complete, it enables the flow of electrical charges (or current) through the circuit. This continuous flow of charges is what powers the devices connected to the circuit.
In summary, a closed circuit is characterized by bulbs shining, a complete circuit, and the flow of charges. This is in contrast to an open circuit, where the circuit is incomplete, and charges do not flow, resulting in bulbs not shining.
To know more about circuit, refer here:
https://brainly.com/question/29765546#
#SPJ11
Complete question:
Which statements describe a closed circuit? select three options.
bulbs will shine.
bulbs will not shine.
he circuit is incomplete.
the circuit is complete.
charges flow.
charges do not flow.
Given that a 4 cylinder, 4 stroke engine gave the following test results:
Shaft Speed N = 2600 rev/min
Torque arm R = 16 cm
Net Brake Load F = 220 N
Fuel consumption mf = 2 g/s
Calorific Value (CV) = 42 MJ/kg
Determine the following:
(a) Brake Power;
(b) Fuel Power;
(c) Brake Thermal Efficiency.
By increasing and decreasing the brake thermal efficiency, compare the impact this has on the shaft speed or net brake load
(a) Pb = 2π * N * T
(b) Pf = mf * CV
(c) Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%
To determine the brake power, fuel power, and brake thermal efficiency, we can use the following formulas:
(a) Brake Power (Pb):
Pb = 2π * N * T
Where N is the shaft speed in revolutions per minute (rpm) and T is the torque.
(b) Fuel Power (Pf):
Pf = mf * CV
Where mf is the fuel consumption rate in kilograms per second and CV is the calorific value of the fuel in joules per kilogram.
(c) Brake Thermal Efficiency (ηb):
ηb = (Pb / Pf) * 100%
Let's calculate these values using the given information:
(a) Brake Power:
Shaft Speed N = 2600 rev/min
Torque arm R = 16 cm = 0.16 m
The torque (T) can be calculated using the formula:
T = F * R
Brake Power (Pb) = 2π * N * T
(b) Fuel Power:
Fuel consumption mf = 2 g/s = 0.002 kg/s
Calorific Value (CV) = 42 MJ/kg = 42 × [tex]10^6[/tex] J/kg
Fuel Power (Pf) = mf * CV
(c) Brake Thermal Efficiency:
Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%
Let's substitute the given values into the equations and calculate the results.
To know more about brake power refer here
https://brainly.com/question/31456389#
#SPJ11
Four students made a graphic organizer describing the parts of the atom. which table best describes the parts of the atom? a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries positive, 0, negative. the last column is labeled location with entries outside nucleus, outside nucleus, inside nucleus. a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries negative, 0, negative. the last column is labeled location with entries inside nucleus, outside nucleus, inside nucleus. a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries 0, negative, positive. the last column is labeled location with entries outside nucleus, inside nucleus, inside nucleus. a 3 column table with 3 rows. the first column is labeled particle with entries proton, electron, neutron. the second column is labeled charge with entries positive, negative, 0. the last column is labeled location with entries inside nucleus, outside nucleus, inside nucleus.
The best table to describe the parts of the atom is a 3 column table with 3 rows. The first column is labeled Particle and contains the entries Proton, Electron, and Neutron.
What is atom?Atom is an open source, cross-platform text editor developed by GitHub. It is a hackable text editor that can be customized to suit the user’s needs and preferences. It is based on Electron, a framework for building cross-platform applications using web technologies such as HTML, CSS and JavaScript. Atom supports multiple panes, allowing users to open and edit multiple files at the same time. It also offers syntax highlighting for a range of programming languages, a built-in package manager for adding new packages, and a selection of themes to customize the look of the editor.
The second column is labeled Charge and contains the entries Positive, 0, and Negative. The last column is labeled Location and contains the entries Inside Nucleus, Outside Nucleus, and Inside Nucleus.
To learn more about atom
https://brainly.com/question/621740
#SPJ4
A small object of mass m is shot horizontally from a spring launcher that is attached to a table. All frictional forces are considered to be negligible. The ball strikes the ground a distance d from the base of the table, as shown in the figure. A second object of mass m2 is launched from the same launcher such that the spring is compressed the same distance as in the original scenario. The distance from the base of the table that the object lands is.
The distance from the base of the table that the second object lands will be the same as the distance from the base of the table that the first object lands.
This is because the initial kinetic energy and spring potential energy that the objects possess is the same in both cases. The only difference between the two scenarios is the mass of the objects, which does not affect the distance traveled. This is because the time taken by the objects to travel the same distance is inversely proportional to their masses, so the total time taken by both objects to travel the same distance is the same.
This means that the distance traveled by both objects is the same, and hence the distance from the base of the table that the second object lands will be the same as the distance from the base of the table that the first object lands.
Know more about kinetic energy here
https://brainly.com/question/26472013#
#SPJ11
Draw a force diagram, find any resultant force and describe the object's motion.
a. An object with mass of 4kg, lying on a rough table, is acted upon by a horizontal
force of 25N. The object experiences a frictional force of 15N.
An object with a mass of 4kg, lying on a rough table, experiences a frictional force of 15N and a horizontal force of 25N, resulting in a net force of 10N, causing the object to accelerate to the right with an acceleration of 2.5 m/s².
Normal force Frictional force (15N)
The normal force points upwards and is equal in magnitude to the weight of the object (mg = 4kg * 9.81m/s² = 39.24N) since the object is not accelerating in the vertical direction.
The frictional force points to the left and is equal in magnitude to the force applied to the object (15N = 25N), indicating that the object is not moving horizontally.
The resultant force is found by subtracting the frictional force from the applied force:
F_net = F_applied - F_friction = 25N - 15N = 10N
The object will accelerate to the right with an acceleration of:
a = F_net/m = 10N/4kg = 2.5 m/s²
Therefore, the object will move to the right with increasing speed.
Learn more about Frictional force here:
https://brainly.com/question/4618599
#SPJ1
a circuit is constructed with the battery, the switch, the inductor, and the three identical resistors shown. after the switch is closed, what is the initial rate of change of current in the circuit?
The initial rate of change of current in the circuit is zero.
When the switch is first closed, the circuit is effectively two separate circuits - one with the battery, switch, and inductor, and another with the three resistors. Initially, the inductor acts as a short circuit, so no current flows through the resistors. As the current through the inductor increases, it generates a magnetic field that opposes the change in current. This means that the rate of change of current is initially zero.
The inductor's opposition to changes in current is due to Faraday's law of electromagnetic induction, which states that a changing magnetic field induces an electromotive force (EMF) in a circuit. In this case, the changing magnetic field is due to the changing current in the inductor, and the induced EMF opposes the change in current.
As the magnetic field builds up, its opposition to changes in current decreases, and the rate of change of current in the circuit increases. Eventually, the inductor acts as a current limiter, and the current through the circuit reaches a steady state value.
To know more about the Resistor, here
https://brainly.com/question/29438184
#SPJ4
What definition describes cognitive behavior therapy?
A.
passive concentration on various bodily sensations
B.
thought correction to reduce stress
C.
progressive muscle relaxation, working progressively downwards
D.
inhaling through the nostrils and exhaling through the mouth
The definition describes cognitive behavior therapy (B).thought correction to reduce stress is correct option.
The goal of cognitive behaviour therapy (CBT), a type of psychotherapy that aims to promote overall mental health and reduce stress, is to rectify one's thoughts. It aids people in recognizing and altering unfavorable thought and behaviour patterns that contribute to their emotional and psychological discomfort. The foundation of cognitive behavioral therapy (CBT) is the notion that our ideas, feelings, and behaviours are interrelated, and that altering one of these elements can result in favorable changes in the others.
Therefore, the correct option is (B).
To know more about cognitive
https://brainly.com/question/30623269
#SPJ1
A 4. 00-kg model rocket is launched, shooting 50. 0 g of burned fuel from its exhaust at an average velocity of 625 m/s. What is the velocity of the rocket after the fuel has burned? (Ignore effects of gravity and air resistance. )
A 4. 00-kg model rocket is launched, shooting 50. 0 g of burned fuel from its exhaust at an average velocity of 625 m/s: the velocity of the rocket after the fuel has burned is approximately -7.81 m/s.
Initially, the rocket and fuel have a combined mass of 4.00 kg + 0.050 kg (converting 50.0 g to kg). The initial velocity is 0 m/s since it hasn't launched yet. After the fuel is burned, the remaining mass of the rocket is 4.00 kg, and we want to find its final velocity (v).
According to the conservation of momentum, the initial momentum of the system must equal the final momentum. So, (initial mass) * (initial velocity) = (final mass) * (final velocity). In this case:
(4.050 kg) * (0 m/s) = (4.00 kg) * (v) + (0.050 kg) * (625 m/s)
0 = (4.00 kg) * (v) + 31.25 kg*m/s
To find the final velocity of the rocket (v), we'll isolate it in the equation:
(4.00 kg) * (v) = -31.25 kg*m/s
v = (-31.25 kg*m/s) / (4.00 kg)
v ≈ -7.81 m/s
The velocity of the rocket after the fuel has burned is approximately -7.81 m/s. The negative sign indicates that the direction of the rocket's velocity is opposite to that of the exhaust.
To know more about velocity, refer here:
https://brainly.com/question/1482529#
#SPJ11
The blades in a blender rotate at a rate of 7000
rpm . when the motor is turned off during
operation, the blades slow to rest in 2.7 s.
The blades in the blender decelerate at a rate of approximately: 4.32 rps² when the motor is turned off during operation, taking 2.7 seconds to come to a complete stop from an initial rotational speed of 700 rpm or 11.67 rps.
To answer your question, let's first convert the given rotational speed from rpm to revolutions per second (rps) by dividing by 60, as there are 60 seconds in a minute:
700 rpm ÷ 60 = 11.67 rps
Next, we need to determine the rate at which the blades are decelerating, which is the change in rotational speed over the 2.7 seconds. Since the blades come to a stop, the final rotational speed is 0 rps. We can calculate the deceleration as follows:
Deceleration = (Final Rotational Speed - Initial Rotational Speed) ÷ Time
Deceleration = (0 rps - 11.67 rps) ÷ 2.7 s
Deceleration ≈ -4.32 rps²
This means that the blades in the blender decelerate at a rate of approximately 4.32 rps² when the motor is turned off during operation, taking 2.7 seconds to come to a complete stop from an initial rotational speed of 700 rpm or 11.67 rps.
To know more about decelerate, refer here:
https://brainly.com/question/9584042#
#SPJ11
A computer simulation attached to controls that include a steering wheel,
brakes, and gas pedal can be used to help people who are learning to drive.
The controls sense the forces applied, and the computer simulation shows
how a car would respond. What is one benefit of this model?
о
A. It can show how to the driver will react when passengers are in the
car.
B. It can be used to teach drivers how to operate other types of
vehicles, such as boats.
O
C. It can show what happens when the driver turns a corner.
D. It does not show traffic signs for drivers.
One benefit of using a computer simulation attached to controls such as a steering wheel, brakes, and gas pedal for learning to drive is C: It can show what happens when the driver turns a corner.
This model allows novice drivers to practice and understand the dynamics of turning corners in a safe, controlled environment. By sensing the forces applied to the controls, the simulation can accurately replicate how a real car would respond, enabling learners to develop proper steering, braking, and acceleration techniques.
Additionally, the simulation can be customized to present various road conditions and scenarios, helping drivers gain experience and confidence before hitting the road. While this model does not directly address options A, B, and D, it focuses on enhancing a driver's overall understanding and ability to maneuver a vehicle safely and effectively. The correct option is C: It can show what happens when the driver turns a corner.
For more about computer simulation:
https://brainly.com/question/29999024
#SPJ11
A toy car has a 1. 5-a current, and its resistance is 2. How much voltage does the car require? v.
The voltage required by the toy car is 3 volts.
Ohm's Law states that the voltage (V) across a resistor is equal to the product of the current (I) flowing through it and the resistance (R). Mathematically, it can be expressed as:
V = I * R
In this case, we are given that the current (I) flowing through the toy car is 1.5 A (amperes), and the resistance (R) of the car is 2 Ω (ohms).
Substituting these values into the equation, we can calculate the voltage (V) required by the car:
V = 1.5 A * 2 Ω
V = 3 V
So, the voltage required by the toy car is 3 volts. This means that to operate the toy car properly, a power source or battery with a voltage output of 3 volts is needed.
The voltage provides the electrical potential necessary for the current to flow through the car's circuit, overcoming the resistance and powering the car's motor or other components.
To know more about voltage refer here
brainly.com/question/32002804#
#SPJ11
Mr. wang works in a recycling center. recyclable materials arrive at the center mixed together. workers use magnets to separate steel cans from other items. which two statements are true about the force between a steel can and a magnet? *
1 point
the attraction between the can and the magnet is a pull.
gravity pushes the can toward the magnet.
the force between the can and the magnet is a noncontact force.
the attraction between the can and the magnet is a push.
The two true statements about the force between a steel can and a magnet are:
1. The attraction between the can and the magnet is a pull.
2. The force between the can and the magnet is a noncontact force.
The attraction between the can and the magnet is a pull:
When a steel can is brought close to a magnet, it experiences a force of attraction. This force is referred to as a pull because it acts in the direction that brings the can closer to the magnet.
This magnetic attraction occurs due to the interaction between the magnetic fields generated by the magnet and the steel can. The presence of a magnetic field in the magnet induces a temporary magnetism in the steel can, creating an attractive force between them.
The force between the can and the magnet is a noncontact force:
In this context, a noncontact force refers to a force that can act between objects without physical contact. In the case of a steel can and a magnet, the force of attraction between them occurs without direct contact between the two objects.
The magnet generates a magnetic field that extends into the surrounding space, and the steel can experiences a force within this magnetic field.
However, there is no need for the can and the magnet to touch each other for this force to be present. This noncontact force is a result of the magnetic field interaction between the magnet and the steel can.
To learn more about magnet, refer below:
https://brainly.com/question/2841288
#SPJ11
Calculate the specific heat
of copper is 385 j/kg . °c.
find the change in thermal
energy for a copper pipe
with a mass of 8 kg when it
is heated from 12°c to 21°c.
show your work.
The change in thermal energy for the copper pipe is 27,720 J.
The formula to calculate the change in thermal energy is:
Q = mcΔT
where Q is the change in thermal energy, m is the mass of the object, c is the specific heat capacity of the material, and ΔT is the change in temperature.
Given:
c (specific heat of copper) = 385 J/kg.°C
m (mass of copper pipe) = 8 kg
ΔT (change in temperature) = 21°C - 12°C = 9°C
Substituting the values in the formula:
Q = mcΔT
Q = (8 kg)(385 J/kg.°C)(9°C)
Q = 27,720 J
To know more about thermal energy refer here
https://brainly.com/question/18989562#
#SPJ11
Which nuclear process would yield the most energy, the fission of uranium or the fission or hydrogen
The fusion of hydrogen would yield more energy than the fission of uranium.
In the fusion process, hydrogen atoms combine to form helium, releasing an enormous amount of energy in the process. This is the process that powers the sun and other stars.
On the other hand, in the fission process, heavy atomic nuclei, such as uranium or plutonium, are split into smaller nuclei, releasing energy.
While fission is used to generate electricity in nuclear power plants, the amount of energy released per reaction is lower than that of fusion.
Fusion reactions have the potential to produce far more energy than fission reactions, but currently, scientists are still working on finding a way to make fusion reactors commercially viable.
To know more about fusion & fission, refer here:
https://brainly.com/question/7720206#
#SPJ11
which of the following phrases best describes the term impedance? group of answer choices the resistance of an inductor the resistance of a capacitor the generalized expression that combines all resistances within a circuit. the internal resistance of a battery within an rlc circuit the resistance to the movement of charge carriers
When creating and analysing electronic circuits, it's critical to impedance because it has an impact on the circuit's overall performance and behaviour.
The phrase that best describes the term impedance is "the generalized expression that combines all resistances within a circuit." Impedance is a measure of the overall opposition to the flow of current in a circuit, and it takes into account both resistance and reactance (which is the resistance to the movement of charge carriers caused by the presence of capacitors and inductors).
Impedance is usually represented by the symbol Z and is measured in ohms. While the resistance of individual components like capacitors and inductors can also affect the impedance of a circuit, the term impedance is typically used to describe the overall opposition to current flow in a more general sense. It is important to understand impedance when designing and analyzing electronic circuits, as it affects the performance and behavior of the circuit as a whole.
To learn more about : circuit
https://brainly.com/question/2969220
#SPJ11
Why is sunlight considered a renewable resource? Which are disadvantages of renewable resources? Check all that apply. Renewable energy supplies may not be completely reliable. Renewable energy sources will never run out. Renewable energy produces large quantities of waste products. It is difficult to generate electricity in large quantities using renewable resources. Many renewable energy facilities have higher operating costs
Sunlight is considered a renewable resource because it is a source of energy that can be replenished over a relatively short period of time.
Sunlight is constantly being produced by the sun and will continue to be produced for billions of years.
The disadvantages of renewable resources are:
- Renewable energy supplies may not be completely reliable.
- Many renewable energy facilities have higher operating costs.
The other two options are not disadvantages of renewable resources. In fact, renewable energy sources will never run out, and they produce relatively smaller quantities of waste products compared to non-renewable sources.
While it is true that it can be difficult to generate electricity in large quantities using renewable resources, it is not a disadvantage in and of itself, but rather a challenge that can be addressed through further research and development.
To know more about Sunlight refer here
https://brainly.com/question/28782526#
#SPJ11
A sculptor is playing absent-mindedly with a large cylindrical lump of clay on a potter's wheel. This particular wheel has wonderful balance and will turn without friction when taken out of gear. The lump of clay is a uniform cylinder of mass 23. 0 kg and radius 19. 0 cm ; the axis of the clay cylinder coincides with the axis of the wheel, and the rotational inertia of the wheel can be neglected in comparison with the rotational inertia of the clay cylinder. The artist decides to throw ball bearings of mass 182. 0 grams at the curved side wall of the turning cylinder and to watch what happens when the bearings hit and stick. Before the first throw, the cylinder is turning once every 1. 70 seconds ; when looked at from above, the cylinder is turning counterclockwise, so that the direction of the angular momentum of the cylinder is Up. The artist throws the first ball bearing horizontally, and it impacts the clay wall at an angle of 60. 0 degrees away from the normal to the curved clay surface. Once the ball bearing is stuck in the clay, the cylinder is found to be turning once every 3. 30 seconds , still turning counterclockwise. Consider the ball bearing to be traveling horizontally before impact; the ball bearing is traveling in a plane which is perpendicular to the axis of the clay cylinder and which contains the center of mass of the clay. What was the speed of the bearing before the collision?
The speed of the ball bearing before the collision was: 1.75 m/s.
We can use the principle of conservation of angular momentum to solve this problem. Initially, the angular momentum of the system (clay cylinder + potter's wheel) is:
L1 = I1 * ω1
where I1 is the moment of inertia of the clay cylinder, and ω1 is its angular velocity.
When the ball bearing is thrown and sticks to the clay, the system's angular momentum changes due to the external torque exerted by the ball bearing. The change in angular momentum is:
ΔL = r * p * sin(θ)
where r is the radius of the cylinder, p is the linear momentum of the ball bearing before the collision, and θ is the angle between the normal to the clay surface and the direction of p. Since the ball bearing is thrown horizontally, θ = 60°.
Since the ball bearing sticks to the clay, the final system consists of a larger cylinder with a mass of 23.182 kg (23.0 kg clay cylinder + 0.182 kg ball bearing) and a new moment of inertia I2. The final angular velocity is ω2.
The conservation of angular momentum principle can be expressed as:
L1 + ΔL = I2 * ω2
Solving for the initial linear momentum p, we get:
p = (I2 * (ω2 - ω1)) / (r * sin(θ))
To find I2, we can use the formula for the moment of inertia of a solid cylinder:
I2 = (1/2) * M * R^2
where M is the mass of the larger cylinder and R is its radius. Since the clay cylinder and ball bearing stick together, their combined radius is still 19.0 cm.
Substituting the given values, we get:
I2 = (1/2) * (23.182 kg) * (0.19 m)^2 = 0.328 kg*m^2
To find ω2, we can use the fact that the final angular velocity is half the initial angular velocity:
ω2 = (1/2) * ω1 = (1/2) * (2π/1.70 s) = 2.33 rad/s
Finally, substituting all the values, we get:
p = (0.328 kgm^2 * (2.33 rad/s - 2π/1.70 s)) / (0.19 m * sin(60°)) = 0.319 kgm/s
The speed of the ball bearing before the collision is equal to its linear momentum divided by its mass:
v = p / 0.182 kg = 1.75 m/s
Therefore, the speed of the ball bearing before the collision was 1.75 m/s.
To know more about collision, refer here:
https://brainly.com/question/24616147#
#SPJ11
what is the highest temperature allowed for cold holding fresh salsa?
The highest temperature allowed for cold holding fresh salsa is 41°F (5°C) or below.
What is the highest temperature?The U.S. Food and Drug Administration (FDA) Food Code stipulates that potentially hazardous foods, such as fresh salsa, must be stored at or below 41°F (5°C) in order to prevent the growth of harmful microorganisms.
It's important to regularly monitor the salsa's temperature and discard any that has been held over this degree for longer than four hours in order to ensure food safety.
Learn more about temperature:https://brainly.com/question/29628128
#SPJ1
The microwave transmitters that we use have a frequency of about 10 ghz. What is the approximate wavelength?.
The wavelength of a microwave frequency is the inverse of its frequency; that is, the wavelength is equal to the speed of light (in a vacuum) divided by the frequency. In this case, the frequency is 10 GHz, meaning the wavelength is approximately 3 cm.
Wavelength is the distance from one peak of a wave to the next, and is inversely proportional to frequency; that is, as frequency increases, wavelength decreases. Microwaves, which have frequencies between 300 MHz and 30 GHz, have wavelengths of 1 m to 1 cm, respectively. This makes them ideal for applications that require short-range communication, such as microwave ovens, wireless communication, and radar.
Microwaves are also used in remote sensing, as they can penetrate some materials, such as clouds, allowing us to measure the properties of objects behind them.
Know more about wavelength here
https://brainly.com/question/12924624#
#SPJ11
A ball is rolling along the ground. The instantaneous velocity at this moment is 4. 81 m/s and it has 788. 1J of kinetic energy. What is the mass of the ball?
The mass of the ball is approximately 68.1 kg. To find this, we used the kinetic energy formula, substituted the given values, and solved for the mass.
We are given the instantaneous velocity (v) of the ball as 4.81 m/s and its kinetic energy (KE) as 788.1 J. Our goal is to find the mass (m) of the ball.
1. We'll use the formula for kinetic energy: KE = 0.5 * m * v^2.
2. Substitute the given values: 788.1 J = 0.5 * m * (4.81 m/s)^2.
3. Calculate the square of the velocity: (4.81 m/s)^2 = 23.1361 m^2/s^2.
4. Substitute the square of the velocity into the equation: 788.1 J = 0.5 * m * 23.1361 m^2/s^2.
5. Multiply both sides of the equation by 2 to eliminate the 0.5: 1576.2 J = m * 23.1361 m^2/s^2.
6. Divide both sides of the equation by 23.1361 m^2/s^2 to isolate the mass (m): m = 1576.2 J / 23.1361 m^2/s^2.
7. Perform the division to get the mass: m ≈ 68.1 kg.
For more about mass:
https://brainly.com/question/19694949
#SPJ11
4) You are a passenger on a spaceship. As the speed of the spaceship increases, you would observe that A) the length of your spaceship is getting shorter. B) the length of your spaceship is getting longer. C) the length of your spaceship is not changing
As a passenger on the spaceship, you would not notice any change in the length of your spaceship, even as its speed increases, because you are in the same frame of reference as the spaceship.
When you are a passenger on a spaceship, and the speed of the spaceship increases, you would observe that the length of your spaceship is not changing (Option C). This phenomenon is due to the fact that you and the spaceship are in the same frame of reference, and you both are moving together at the same speed.
However, if an external observer were watching the spaceship from a stationary point, they would observe the length of the spaceship getting shorter as its speed increases. This phenomenon is known as "length contraction" and occurs due to the theory of special relativity, proposed by Albert Einstein. Length contraction states that an object's length in the direction of motion will contract as it approaches the speed of light, but this is only observed by an external observer who is not moving with the object.
In summary, as a passenger on the spaceship, you would not notice any change in the length of your spaceship, even as its speed increases, because you are in the same frame of reference as the spaceship. The length contraction phenomenon would only be observed by an external observer who is not moving with the spaceship.
For more about spaceship:
https://brainly.com/question/14198872
#SPJ11
At t=0 a grinding wheel has an angular velocity of 21. 0 rad/s. It has a constant angular acceleration of 26. 0 rad/s2 until a circuit breaker trips at time t = 2. 10 s. From then on, it turns through an angle 438 rad as it coasts to a stop at constant angular acceleration. Through what total angle did the wheel turn between t=0 and the time it stopped?
At t=0 a grinding wheel has an angular velocity, the wheel turned through a total angle of approximately: 501.21 radians between t=0 and the time it stopped.
To find the total angle through which the wheel turned between t=0 and the time it stopped, we need to consider two parts: the angle covered during constant angular acceleration, and the angle covered while coasting to a stop.
1. During constant angular acceleration:
At t=0, the angular velocity is 21.0 rad/s, and the angular acceleration is 26.0 rad/s². The circuit breaker trips at t=2.10 s. Using the equation θ1 = ω0t + 0.5αt², we can find the angle covered during this time:
θ1 = (21.0 rad/s)(2.10 s) + 0.5(26.0 rad/s²)(2.10 s)²
θ1 ≈ 63.21 rad
2. While coasting to a stop:
After the circuit breaker trips, the wheel turns through an angle of 438 rad as it coasts to a stop at constant angular acceleration. This means θ2 = 438 rad.
To find the total angle through which the wheel turned, simply add θ1 and θ2:
Total angle = θ1 + θ2 = 63.21 rad + 438 rad ≈ 501.21 rad
Therefore, the wheel turned through a total angle of approximately 501.21 radians between t=0 and the time it stopped.
To know more about angular velocity, refer here:
https://brainly.com/question/13649539#
#SPJ11
you see a burglar run by you. the police come by a few seconds later and ask you for help. the most useful quantity you could give them is the burglar'smultiple choice question.velocity.acceleration.time.speed.
The most useful quantity you could give the police in this situation is the burglar's: Velocity.
Explanation:
1. Velocity: It provides both the speed and direction of the burglar, which would be helpful for the police to track and catch them.
2. Acceleration: It refers to the rate of change in velocity, but it wouldn't be as helpful without knowing the initial velocity and direction.
3. Time: It's not particularly helpful in this situation, as it does not give any information about the burglar's movement.
4. Speed: While it gives the rate of movement, it lacks the direction, which is crucial for the police to know where the burglar is headed.
To Learn More About Velocity
https://brainly.com/question/80295?source=archive
SPJ11
A 720-kev (kinetic energy) proton enters a 0. 20-t field, in a plane perpendicular to the field. What is the radius of its path? s
The radius of the circular path of the proton is [tex]5.23 * 10^-^3 m.[/tex]
How to solve for the radius of the path[tex]KE = \frac{1}{2} mv^2[/tex]
where KE is the kinetic energy and m is the mass of the particle. Rearranging for v, we get:
[tex]v = \frac{\sqrt{2*KE} }{m}[/tex]
where m is the mass of the proton.
Substituting the values, we get:
[tex]v = \frac{\sqrt{2*720 keV * 1.60 x 10^-^1^9 J/keV} }{1.67 * 10^-^2^7 kg}[/tex]
[tex]v = 2.11 * 10^7 m/s[/tex]
Next, we can substitute the given values for the magnetic field and the charge of the proton:
B = 0.20 T
[tex]q = 1.60 * 10^-^1^9 C[/tex]
Substituting these values into the equation for the radius, we get:
[tex]r =\frac{1.67 * 10^-^2^7 kg * 2.11 * 10^7 m/s}{1.60 * 10^-^1^9 C * 0.20 T}[/tex]
[tex]r = 5.23 * 10^-^3 m[/tex]
Therefore, the radius of the circular path of the proton is[tex]5.23 * 10^-^3 m.[/tex]
Read more on radius of path here:https://brainly.com/question/16816166
#SPJ1