a 5-kg shark swimming at 1 m/s swallows an absent-minded 1-kg fish swimming toward it at 4 m/s. the speed of the shark after his meal is

The question that would best help the student identify each wave as either electromagnetic or mechanical is "What type of energy is transferred by each wave?".

Thus, the correct answer is "What type of energy is transferred by each wave?" (D).

Electromagnetic waves are those that do not require a medium to propagate, while mechanical waves are those that require a medium. This means that if the wave is a mechanical wave, it needs a medium to propagate. Therefore, the student can easily distinguish the electromagnetic wave from the mechanical wave by asking what type of energy is transferred by each wave.

Your question is incomplete, but most probably your options were

A. Which wave has more energy?

B. Which wave can travel through air?

C. What direction does each of the waves travel?

D. What type of energy is transferred by each wave?

Thus, the correct option is D.

For more information about electromagnetic and mechanical waves refers to the link: https://brainly.com/question/3101711

#SPJ11

EM energy is like a wave as well as a particle. The concept of wave-particle duality is accounted for in the Quantum Mechanical model.

How is EM energy like a wave?

EM energy is like a wave in a way that it travels from one place to another. This travel is similar to the waves found in a water body that travel from one place to another.

In other words, it travels as a disturbance in a medium or even vacuum that doesn’t need a medium.

In addition, EM waves have features of waves like diffraction, reflection, and interference.

How is EM energy like a particle?

EM energy is also like a particle as it can also act like a particle. An example of this is the photon. Photons are energy particles that have wave-particle duality.

These particles can have particle-like behavior such as being emitted from a source, hitting a target, and interacting with the environment like other particles.

Thus, they act like a wave as well as a particle.

What model accounts for both of these characteristics? The Quantum Mechanical model accounts for both these characteristics, the wave-like and particle-like behavior of EM energy.

It explains that the energy of EM waves is quantized and its energy comes in packets known as photons. These photons can act as particles as well as waves in different situations.

The wave-particle duality is thus accounted for in the Quantum Mechanical model.

To know more about Quantum Mechanical model, refer here:

https://brainly.com/question/11852353#

#SPJ4

The resistance of the material at a temperature of 50°C is approximately 25.791 Ω.

We can use the formula for temperature dependence of resistance to solve this problem:

R2 = R1 [1 + α(T2 - T1)]

where R1 is the resistance at temperature T1, R2 is the resistance at temperature T2, and α is the temperature coefficient of resistance.

Plugging in the given values, we get:

R2 = 23 Ω [1 + (3.9 x 10⁻³/°C)(50°C - 20°C)]

Simplifying, we get:

R2 = 23 Ω [1 + (3.9 x 10^-3/°C)(30°C)]

R2 = 23 Ω [1 + 0.117]

R2 = 23 Ω [1.117]

R2 = 25.791 Ω

Therefore, the resistance of the material is approximately 25.791 Ω.

Learn more about Resistance:

#SPJ11

The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.

The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.

Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.

Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:

Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F

Heat Loss = 108 BTU/hour

Therefore, the heat lost through the window is 108 BTU per hour.

To know more about heat loss click here:

https://brainly.com/question/14228650

#SPJ11

Complete Question:

How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?

A 45.0-cm3 piece of submerged iron will experience a greater buoyant force than a 45.0-cm3 piece of wood floating with part of its volume above water.

The buoyant force refers to the upward force that an object in a fluid experiences due to the pressure difference between the top and bottom of the object. Archimedes' principle states that the buoyant force on an object is equivalent to the weight of the fluid displaced by the object. The buoyant force is proportional to the volume of the object submerged in the fluid.

A submerged object displaces its weight of fluid, whereas a floating object displaces its own weight of fluid. Since iron has a higher density than water, a 45.0-cm3 piece of submerged iron will displace more water and experience a greater buoyant force than a 45.0-cm3 piece of wood floating with part of its volume above water.

for such more question on buoyant force

https://brainly.com/question/15706301

#SPJ11

A wave crest arrives on the shore a median of every 10. zero seconds, so the frequency is 0. one hundred Hz. The average speed of the waves is 1.five m/s.

We are to decide the common pace of the waves.

Using the formula

v = fλ

Where

v is the speed

f is the frequency

and λ is the wavelength

From the given information

f = 0.1 Hz

λ = 15.0 m

∴ Speed of the wave = 0.1 × 15.0

Speed of the wave = 1.5 m/s

Average speed is defined as the total distance traveled by an object divided by the time taken to cover that distance. It is the measure of the average rate at which an object covers a certain distance in a given amount of time. Mathematically, the average speed is expressed as: Average speed = Total distance traveled / Time taken

It is important to note that average speed is not the same as instantaneous speed, which refers to the speed of an object at a particular instant in time. Average speed takes into consideration the entire adventure, while instant velocity only reflects the velocity at a unmarried moment. The unit of measurement for average speed is meters per second (m/s) or kilometers per hour (km/h), depending on the system of measurement used.

To know more about Average speed visit here:

brainly.com/question/12322912

#SPJ4

(a) To find the rms current I_rms provided by the generator, we can use the formula for average power:

[tex]P = V_{rms} * I_{rms}[/tex]

Rearranging this formula gives:

[tex]I_{rms} = P / V_{rms}[/tex]

= 2 x 10^5 kW / 250 kV = 800 A

Therefore, the rms current provided by the generator is 800 A.

(b) The average power loss along the line is given by:

[tex]P_{loss} = P_{line} / P = 0.12[/tex]

where P_line is the power delivered to the city. Rearranging this formula gives:

[tex]P_{line} = P / (1 - P_{loss})[/tex]= 2 x 10^5 kW / (1 - 0.12) = 2.27 x 10^5 kW

The power loss along the line is given by:

[tex]P_{loss} = I_{rms}^2 * R * L[/tex]

where R is the resistance of the transmission cable and L is the distance of the cable. Substituting the values given and solving for R gives:

R = [tex]P_{loss} / (I_{rms}^2 * L)[/tex]= 0.0153 Ω

Therefore, the resistance of the 180-km long transmission cable is 0.0153 Ω.

(c) The resistance of a wire is given by:

R = rho * L / A

where rho is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire. Solving for A gives:

A = rho * L / R = (1.7 x 10^-8 Ω m) * 180,000 m / 0.0153 Ω = 200 mm^2

Therefore, the cross-sectional area of the transmission wire is 200 mm^2.

An electric generator consists of a rotor (a rotating part) and a stator (a stationary part). The rotor is connected to a shaft that is driven by an external source, such as an engine or a turbine. The stator contains a set of coils of wire that are arranged around the rotor. When the rotor spins, it creates a changing magnetic field that induces an electric current in the coils of wire in the stator.

Electric generators are used in a variety of applications, from small portable generators for camping and outdoor activities to large power plants that provide electricity to entire cities. They are also used in renewable energy systems, such as wind turbines and hydroelectric power plants, to convert the mechanical energy of wind and water into electricity.

To learn more about Generator visit here:

brainly.com/question/15277088

#SPJ4

According to computer models, planetary migration is most likely to occur in a planetary system early in its history, when there is still a gaseous disk around the star.

Planetary migration is the process by which a planet changes its orbital position over time. The process is often caused by gravitational interactions with other planets or a planetesimal disk, which causes the planet to migrate inward or outward from its original orbit.

Other factors that can contribute to planetary migration include the late stages of a star's evolution when a stellar wind clears the gaseous disk away and asteroids and comets occasionally collide with planets.

However, early in a planetary system's history, when there is still a gaseous disk around the star, is the most likely time for planetary migration to occur.

To know more about planetary migration:

https://brainly.com/question/29360183

#SPJ11

Miguel's self-esteem, which is derived from his ability to make wise and ethical decisions, would be classified as moral self-esteem.

What is Self esteem?

Self-esteem refers to an individual's overall subjective evaluation of their own worth, value, and capabilities. It is the degree to which a person sees themselves as competent, worthy, and able to cope with life's challenges. Self-esteem can be influenced by a variety of factors, including genetics, upbringing, personal experiences, and social and cultural influences. People with high self-esteem tend to be more confident, resilient, and motivated, while those with low self-esteem may struggle with feelings of inadequacy, self-doubt, and insecurity.

The type of self-esteem described in the scenario is moral self-esteem. This is because Miguel feels confident in himself based on his ability to make wise and ethical decisions, which reflects his moral values and principles. Moral self-esteem is based on one's sense of right and wrong and the extent to which one adheres to their moral standards and values. It is an important aspect of overall self-esteem as it reflects an individual's integrity, character, and ethical conduct.

Learn more about Self esteem from given link

https://brainly.com/question/1447337

#SPJ1

The velocity of the larger fish after the meal is zero.

We can use the law of conservation of momentum, which states that the total momentum of a closed system remains constant. Before the light fish is swallowed, the total momentum is,

p1 = m1v1 + m2v2

where m1 = 4 kg, v1 = 1.5 m/s (velocity of the heavy fish), m2 = 1.2 kg, and v2 = -3.0 m/s (negative because the light fish is swimming toward the heavy fish).

p1 = (4 kg)(1.5 m/s) + (1.2 kg)(-3.0 m/s)

p1 = 0 kg m/s

After the light fish is swallowed, the two fish become one system. Let the velocity of the larger fish after the meal be v.

The total momentum of the system after the meal is,

p2 = (m1 + m2)v

By the law of conservation of momentum, p1 = p2,

0 kg m/s = (4 kg + 1.2 kg) v

Solving for v,

v = 0 m/s

To know more about speed, here

brainly.com/question/31080132

#SPJ4

The magnetic field strength created by the wire coil is equivalent to the ambient magnetic field when it is deflected at a right angle.

The magnetic field strength created by the wire coil is equivalent to the ambient magnetic field when it is deflected at a right angle. The Biot-Savart Law, which relates magnetic field strength to the current in a wire and the distance from the wire, applies to a wire coil.

The strength of the magnetic field generated by a current-carrying wire is proportional to the current in the wire and the number of turns per unit length. The magnetic field's intensity is determined by the number of turns in the wire coil, the current in the wire coil, the radius of the coil, and the permeability of free space.

The equation for calculating the magnetic field strength at a point in space around a current-carrying wire is given by the Biot-Savart Law:

  B = µ₀I/2πr.

Where µ₀ is the permeability of free space, I is the current, and r is the distance from the wire to the point where the magnetic field strength is to be calculated.

Learn more about Biot-Savart Law at https://brainly.com/question/29564274

#SPJ11

Explanation:

Tony's claim that solids do not have a lot of thermal expansion is partially true, but it is not entirely accurate. All materials, including solids, do undergo some degree of thermal expansion or contraction when their temperature changes. However, the amount of expansion or contraction varies depending on the material's coefficient of thermal expansion (CTE), which measures the material's response to temperature changes.

Some materials, like metals, have a high CTE and undergo significant expansion or contraction when their temperature changes. On the other hand, materials like ceramics and glasses have a low CTE and undergo relatively little expansion or contraction. Wood, which is the material used to make the door in Valdez's house, has a moderate CTE, meaning it undergoes some degree of expansion or contraction with changes in temperature.

Therefore, Valdez's argument is valid. The wooden door in his house experiences thermal expansion in the summer due to the higher temperatures. As the temperature increases, the particles in the wood gain kinetic energy, move faster, and create more space between each other, which results in the door expanding. Conversely, in the winter, the lower temperatures cause the particles in the wood to lose energy, move slower, and become closer to each other, which results in the door contracting.

In conclusion, while Tony's statement is correct in that solids do not have a lot of thermal expansion compared to liquids or gases, all solids, including wood, do experience some degree of thermal expansion or contraction due to changes in temperature.

When a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet, the frictional force exerted by the surface on the crate is 588 N.

When a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet, the frictional force exerted by the surface can be calculated as follows:

The weight of the crate = m × g = 100 kg × 9.8 m/s² = 980 N

Force applied by the worker = F = 600 N

The force of friction acting on the crate is given by the following formula:

Ff = μF

Where, μ is the coefficient of friction, F is the normal force acting on the crate.

Notes: The normal force is equal and opposite to the weight of the crate. i.e., N = 980 N1. The frictional force exerted by the surface on the crate is the static frictional force initially. Hence, we use the coefficient of static friction for our calculation.

2. If the force applied by the worker is not enough to overcome the static frictional force, then the crate will not move and the frictional force will remain static friction.

3. Once the crate starts moving, the static friction will convert to kinetic friction. Hence, we will use the coefficient of kinetic friction if the force applied by the worker is greater than the force of static friction. Initially, the force applied by the worker is less than the force of static friction, hence the frictional force exerted on the crate will be the static frictional force.

Frictional force = Ff = μN

The normal force acting on the crate = Weight of the crate = 980 N

Frictional force =

Ff = μN

= 0.6 × 980 N

= 588 N

Therefore, the frictional force exerted by the surface on the crate is 588 N.

For more such questions on frictional force , Visit:

https://brainly.com/question/4618599

#SPJ11

The current that flows through the 200 Ω resistor is 1.56 A.

Given resistance values of 200 Ω, 250 Ω, and 1000 Ω are connected in parallel across a source. The source current is 6 A. We are required to find the current that flows through the 200 Ω resistor.

Recall that when resistors are connected in parallel, the current is divided among them. And the voltage across each resistor is the same. The equivalent resistance of three parallel resistors is given by;

1/Rp = 1/R1 + 1/R2 + 1/R3Rp = (R1 x R2 x R3)/(R1R2 + R1R3 + R2R3)

Put the values into the formula;

Rp = (200 x 250 x 1000)/(200×250 + 200×1000 + 250×1000)

Rp = 52.17 Ω

The total current in the circuit, It = 6 A

From Ohm's Law;

V = IR,

where V is the voltage across each resistor

V1 = V2 = V3V = I×R

Therefore; V = I×Rp

The current flowing through the 200 Ω resistor, I1 = V1/200 = I × Rp/200The current flowing through the 200 Ω resistor, I1 = (6×52.17)/200I1 = 1.56 A

Thus, the current that flows through the 200 Ω resistor is 1.56 A.

To know more about Parallel current, refer here:

https://brainly.com/question/27986190#

#SPJ11

When a car has been sitting idle for more than an hour, the first few minutes of starting the engine can result in significantly more emissions than when the engine is warm. This is due to the formation of cold start hydrocarbon (HC) emissions. When an engine is cold, the fuel and air mixture is not as well vaporized as when the engine is warm. The unvaporized fuel droplets are pushed out of the tailpipe, resulting in higher HC emissions.

To reduce cold start emissions, cars are now equipped with technology like onboard computers, direct injection systems, variable valve timing, and catalytic converters. These technologies work to increase the fuel efficiency and reduce the amount of hydrocarbons released into the atmosphere.

In summary, starting a car after it has been sitting idle for more than an hour can result in up to 10 times more emissions than when the engine is warm. To mitigate this, cars are now equipped with advanced technology to reduce emissions and improve fuel efficiency.

Know more about pollutants here:

https://brainly.com/question/29594757

#SPJ11

The PV factor of the material is 73080 psi-ft/min.

The PV factor of a material is a measure of its ability to withstand the combined effects of pressure and velocity. It is calculated by multiplying the maximum pressure (in psi) by the maximum velocity (in feet per minute).

PV factor = maximum pressure (in psi) × maximum velocity (in ft/min)

Plugging in the given values, we get:

PV factor = 256 psi × 285 ft/min

PV factor = 73080 psi-ft/min

To learn more about The PV factor you can click this link below: https://brainly.com/question/15432294

#SPJ11

The charge (sign and magnitude) of a particle of mass 1.45 g must be for it to remain stationary when placed in a downward-directed electric field of magnitude 700 n/c is -1.029x10⁻⁴ C.

The magnitude of the charge must be equal to the magnitude of the electric field (700 n/c).

Therefore, we can write:-mg = qE

where, m = 1.45g = 1.45 x 10⁻³ kg

E = 700 N/cm = 1.45 x 10⁻³ kg x 9.81 m/s²

= 0.01419 N (Weight of the particle)

q = -1.029 x 10⁻⁴ C

To remain stationary when placed in a downward-directed electric field of magnitude 700 n/c, the charge (sign and magnitude) of a particle of mass 1.45 g must be negative.

Learn more about the Charge of a particle here:

https://brainly.com/question/28233928

#SPJ11

In the cylinder, This equation can be solved for ω, and then v can be found using the relationship v = r * ω.

When the cylinder is released from rest, its gravitational potential energy is converted into kinetic energy (translational and rotational). To find the instantaneous velocity (v) and angular velocity (ω) of the cylinder, we can apply the conservation of mechanical energy and the relationship between linear and angular velocities.
Initially, the cylinder has potential energy (PE) due to its height (h) above the ground:
PE_initial = m * g * h
When the cylinder descends and starts rotating, it has both translational kinetic energy (KE_trans) and rotational kinetic energy (KE_rot):
KE_trans = 0.5 * m * v^2
KE_rot = 0.5 * I * ω^2
Since the string does not slip, we can relate linear velocity (v) to angular velocity (ω) as:
v = r * ω
Now, applying the conservation of mechanical energy:
PE_initial = KE_trans + KE_rot
Substituting the expressions for PE_initial, KE_trans, and KE_rot, and the relationship between v and ω, we get:
m * g * h = 0.5 * m * (r * ω)^2 + 0.5 * I * ω^2

For more such questions on cylinder

brainly.com/question/31299975

#SPJ11

The interaction between the sprinter and the starting blocks best represents Newton's Third Law. Newton's Third Law is "For every action, there is an equal and opposite reaction."

When a sprinter pushes off against the starting blocks, the force they exert on the blocks (the action) is met with an equal and opposite force from the blocks pushing back against the sprinter (the reaction). This reaction force propels the sprinter forward and helps them to achieve a more powerful and explosive start. Newton's Third Law of Motion is particularly relevant to sports and athletics, as many actions in sports involve interactions between two objects or individuals, such as a runner pushing off against the ground or a football player colliding with another player.

Learn more about newton's laws: https://brainly.com/question/28171613

#SPJ11

The amount of energy that leaves the Earth's atmosphere system is 100 units of energy.

According to the conservation of energy principle, energy can neither be created nor destroyed, it can only be transformed from one form to another. Therefore, the energy that enters the Earth's atmosphere system is absorbed, reflected, and emitted as heat.

In simpler terms, some of the energy is reflected back into space, some of it is absorbed by the Earth's surface and is emitted back as heat, and some of it is trapped by greenhouse gases in the atmosphere. Ultimately, the amount of energy that leaves the system is approximately equal to the amount of energy that enters the system.

Thus, the amount of energy that leaves the Earth's atmosphere system is 100 units of energy.

To know more about greenhouse gases click here:

https://brainly.com/question/14131369

#SPJ11

The resistance of the load, given that 10.0 volts generate a current of 700 milliamps, is 14.3 ohms. To calculate this, you need to use Ohm's Law, which states that resistance (R) is equal to the voltage (V) divided by the current (I).

Therefore, R = V / I, or in this case, R = 10.0 volts / 0.700 amps = 14.3 ohms.

The resistance of the load can be calculated using Ohm's law, which states that the resistance is equal to the voltage divided by the current. In this case, the resistance would be 10.0V/0.7A, which equals 14.29Ω

The concept of resistance is important in audio signals and systems. As audio signals are AC, the resistance of a load determines how much of the signal is attenuated as it passes through the load. A higher resistance means that the signal is weakened, while a lower resistance means that the signal is stronger.

Therefore, knowing the resistance of a load is important when setting up audio systems, as it affects the strength of the signal that is sent to the speakers. Furthermore, impedance, which is closely related to resistance, is important in audio signals and systems, as it affects the quality of the signal being sent to the speakers.

For more questions related to Resistance.

https://brainly.com/question/29427458

#SPJ11

The point between Earth and the moon where a space probe will experience no net force would be 384,400 km from Earth.

The point between Earth and the moon where a 50,000 kg space probe experience no net force is called the Lagrangian point. The fifth Lagrangian point (L5) is located about 60 degrees behind the moon, about 384,400 km from Earth. Therefore, the distance between the probe and the Earth is 384,400 km, which is the average distance between the Moon and Earth.

The Lagrangian point is a point in space where the gravitational forces of two major celestial bodies (such as Earth and the moon) or more celestial bodies balance the gravitational forces, allowing a third smaller body to remain in constant position relative to the larger bodies.

L5, the fifth Lagrangian point, is a Lagrangian point in the Earth-Moon system, located about 60 degrees behind the Moon. It is approximately 384,400 km away from Earth, the same as the average distance between Earth and the Moon. It is one of the stable equilibrium points of the Earth-Moon system, as the gravitational forces of the Earth and the Moon balance the centrifugal force acting on a spacecraft at this point.

Learn more about Lagrangian point:

https://brainly.com/question/29084799

#SPJ11

The spring constant is 0.28 N/m if 14 oscillations take 11.0s.

In physics, oscillations are defined as a repetitive variation, typically in time, of some measure about a central value (often a point of equilibrium) or between two or more different states. The spring constant (k) is a measure of a spring's stiffness. It is the amount of force required to displace a spring a specific distance (typically one meter).

The spring constant formula is expressed as:-

F=kx

where k is the spring constant and x is the displacement produced by the force F.

We know that the air-track glider has a mass of 240 g, and it is attached to a spring. The glider is pushed 8.2 cm against the spring and then released. The oscillations are then observed, and it is found that 14 oscillations occur in 11.0 s.

We can calculate the spring constant by using this information.

Let us now calculate the spring constant k.

For a mass (m) attached to a spring, the formula for the time period T is:-

T=2π√m/k

We know that the time period T = 11/14 s. We also know that the glider has a mass of 240 g or 0.24 kg.

Now, we can solve the formula for the spring constant k as follows:-

k= 4π²m/T²k = 4π² × 0.24 kg / (11/14 s)²k = 0.28 N/m

Therefore, the spring constant is 0.28 N/m.

Learn more about oscillations: https://brainly.com/question/27237546

#SPJ11

At a certain location, the wind is blowing steadily at 10 m/s. Determine the mechanical energy of air per unit mass and the power generation potential of a wind turbine is 98.4 kW.

Mechanical energy of air per unit mass:

Mechanical energy of air per unit mass can be calculated using the formula given below:

Mechanical energy of air per unit mass = 1/2(v²)

Where, v = velocity of air = 10 m/s

Putting the values in the above formula, we get:

M.E of air per unit mass = 1/2 (10²) = 50 J/kg.

Power generation potential of a wind turbine:

The power generated by a wind turbine can be calculated using the formula given below:

Power generated = 1/2ρAv³Cp

Where, ρ = density of air = 1.23 kg/m³A = area of the wind turbine blades = 100 m² (assuming a 10 m diameter turbine) Cp = coefficient of performance of the wind turbine = 0.4 (typical value for modern wind turbines)

Putting the values in the above formula, we get:

Power generated = 1/2 x 1.23 x 100 x (10)³ x 0.4 = 98400 W = 98.4 kW.

for such more question on power generation potential

https://brainly.com/question/21430867

#SPJ11

The magnitude of the torque on the current loop is calculated using the formula τ=BIA sinθ, where B is the magnitude of the magnetic field, I is the current, A is the area of the loop, and θ is the angle between the magnetic field and the loop's plane. In this case, the magnitude of the torque is τ = (1.2 T)(0.5 A)(5 cm x 5 cm)sin(30°) = 7.5 x 10-3 Nm.

The torque is the rotational force that causes the loop to rotate. This is due to the fact that a force is exerted on the loop by the magnetic field when there is a current running through it. This force generates a torque on the loop, which will cause it to rotate until the angle between the plane of the loop and the magnetic field is 0°.

Know more about torque here

https://brainly.com/question/25708791#

#SPJ11

The following statement is true about this circuit: option (A) The equivalent resistance of the circuit is the algebraic sum of all resistors.

This means that the total resistance of the circuit is equal to the sum of the individual resistances of each resistor. The total voltage on this combination is an algebraic sum of voltages on each resistor. This means that the total voltage of the circuit is equal to the sum of the voltages across each individual resistor.

The currents through all resistors are the same. This means that the total current that flows through the circuit is the same as the current that flows through each individual resistor.

To summarize, in a series circuit the equivalent resistance, total voltage, and current are equal to the algebraic sum of all the individual resistances, voltages, and currents respectively.  

To know more about resistance refer here:

https://brainly.com/question/11431009#

#SPJ11

The furthest protoplanet from the Sun is most likely to become a jovian planet due to the abundance of solid ice grains in the outer regions.

Jovian planets, otherwise called gas goliaths, are enormous planets that are fundamentally made out of hydrogen and helium, with a thick climate and no strong surface. These planets are accepted to have shaped further from the Sun than the earthly planets, in locales of the sun oriented cloud where the temperature was low enough for hydrogen and helium to consolidate into strong ice grains, known as planetesimals. This is on the grounds that in the external districts of the sun based cloud, the temperature was low enough for strong ice grains to collect and shape a strong center, which could then accumulate gas from the encompassing cloud to frame a thick air.Consequently, the protoplanet found uttermost from the Sun has a more prominent probability of turning into a jovian planet because of the overflow of strong ice grains in the external locales of the sun powered cloud.

To learn more about jovian planet, refer:

https://brainly.com/question/18089177

The energies that are part of the total energy of a flowing fluid are as follows: enthalpy, kinetic energy, and potential energy.

Energy is the capacity to accomplish work or to transfer heat. The total energy of a fluid in motion is made up of both kinetic and potential energies.

Other options are:

Therefore, the total energy of a flowing fluid consists of enthalpy, kinetic energy, and potential energy.

To know more about potential energy click here:

https://brainly.com/question/24284560

#SPJ11

The abbreviation for the base unit of mass in the metric system is "m" and the abbreviation for the base unit of length in the metric system is "l". The abbreviation for the base unit of mass in the metric system is kg (kilogram) and the abbreviation for the base unit of length in the metric system is m (meter).

What is the metric system? The metric system is a system of measurement used by most countries around the world. It is also known as the International System of Units (SI). It has a base unit for each quantity it measures. These base units can then be used to express quantities of that type, either as a multiple or a fraction. For example, the base unit for mass is the kilogram (kg). We can express mass in grams (g), which is a smaller unit of mass. A kilogram is equal to 1000 grams. Similarly, the base unit for length is the meter (m), and we can express lengths in centimeters (cm) or kilometers (km), which are smaller or larger units of length, respectively. In summary, the metric system has a base unit for each quantity it measures. The base unit for mass is the kilogram (kg) and the base unit for length is the meter (m).

For more details on metric system , click on the below link:

https://brainly.com/question/23183575

#SPJ11

The average force on the person if they are stopped by an airbag that compresses an average of 15.0 cm is approximately 70,000 N.

To calculate the average force on a person,

Average force = (change in momentum) / (time interval)

Assuming that the person's initial velocity is constant, we can simplify the formula to,

Average force = (mass of the person) x (change in velocity) / (time interval)

Now, let's consider the two scenarios,

Stopped by a padded dashboard that compresses an average of 1.00 cm:

Assuming the person's initial velocity is known and constant, we need to know the time interval it takes for the person to stop after hitting the dashboard. Without this information, we cannot calculate the average force.

Stopped by an airbag that compresses an average of 15.0 cm:

The time interval for an airbag to deploy and cushion the person's impact is typically very short (about 0.03 seconds), so we can assume that the time interval is negligible in this case. Therefore, we can use the simplified formula above.

Let's assume the mass of the person is 70 kg and their initial velocity is 30 m/s. The change in velocity is the final velocity (0 m/s) minus the initial velocity (30 m/s), which is -30 m/s. The negative sign indicates that the person's velocity is decreasing.

Using the formula,

Average force = (mass of the person) x (change in velocity) / (time interval)

= (70 kg) x (-30 m/s) / (0.03 s)

= -70,000 N

To know more about average force, here

brainly.com/question/29754124

#SPJ4