The index of refraction of the transparent material is approximately 1.46.
The index of refraction (n) of a transparent material is defined as the ratio of the speed of light in vacuum to the speed of light in the material. The relationship between the angles of incidence (θ₁) and refraction (θ₂) and the indices of refraction of the two media can be described by Snell's law, which states that:
n₁ sin(θ₁) = n₂ sin(θ₂)
where n₁ is the index of refraction of the first medium (in this case, air), and n₂ is the index of refraction of the second medium (the transparent material).
Given that the angle of incidence is 25 degrees and the angle of refraction is 17 degrees, we can use Snell's law to solve for n₂:
n₁ sin(θ₁) = n₂ sin(θ₂)
(1.000 sin 25°) = n₂ sin 17°
Solving for n₂, we get:
n₂ = (1.000 sin 25°) / sin 17°
n₂ ≈ 1.46
To know more about refraction, here
brainly.com/question/14760207
#SPJ4
Why do nuclear reactions tend to produce more energy than chemical reactions?
A. In chemical reactions, the total amount of energy and mass is not conserved
B. In nuclear reactions, some mass is converted to energy
C. In Chemical reactions, some mass is converted to energy
D. In nuclear reactions, the total amount of energy and mass is not conserved
The correct answer is B. In nuclear reactions, some mass is converted to energy.
What is nuclear reaction?A nuclear reaction is the collision of two nuclei, or a nucleus and an external subatomic particle, to form one or more new nuclides. As a result, a nuclear reaction must result in the transformation of at least one nuclide.
The particle that is bombarding may be an alpha particle, a gamma-ray photon, a neutron, a proton, or a heavy ion.
Learn more about nuclear reactions here:
https://brainly.com/question/25387647
#SPJ1
Can anyone solve this question PLEASE hurry❗️⚠️
Answer:
vii. c
ix. a
x. d
Explanation:
trust
Why should people be cautious when using statistics from news stories or information from other sources ?
When using statistics from news articles or information from other sources, people should exercise caution because they might not always reflect the whole picture or might be presented in a biased or misleading way.
Why the caution about news?Statistics are not always based on accurate or reliable data, and they can be readily manipulated or misunderstood to support an agenda or stance.
Before making any decisions or acting on the data, it is essential to confirm the information's source and take into account the context in which it is presented. Furthermore, outdated or based on a small sample size statistical data may have an impact on their reliability and accuracy.
Learn more about news:https://brainly.com/question/14632709
#SPJ1
Suppose you can jump 1 m on earth. how high would you be able to jump on
mars? the mass of mars is 6.4181023kg and its radius is 3.38106m.
To determine how high you would be able to jump on Mars compared to Earth, we can use the concept of gravitational potential energy.
On both Earth and Mars, the gravitational potential energy (PE) is given by the equation:
PE = mgh
where m is your mass, g is the acceleration due to gravity, and h is the height.
The acceleration due to gravity can be calculated using Newton's law of universal gravitation:
g = (G * M) / (r^2)
where G is the gravitational constant, M is the mass of the celestial body (in this case, Mars), and r is the distance from the center of the celestial body to the surface (in this case, the radius of Mars).
Let's assume your mass is the same on both Earth and Mars.
On Earth, the acceleration due to gravity (g_Earth) is approximately 9.8 m/s^2, and the height (h_Earth) is 1 m.
PE_Earth = m * g_Earth * h_Earth
On Mars, we need to calculate the acceleration due to gravity (g_Mars) using the given mass and radius of Mars. The gravitational constant (G) is approximately 6.67430 × 10^(-11) m^3/(kg s^2).
g_Mars = (G * M) / (r^2)
g_Mars = (6.67430 × 10^(-11) m^3/(kg s^2) * 6.418 * 10^(23) kg) / (3.38106 m)^2
Now we can calculate the height (h_Mars) you would be able to jump on Mars:
PE_Mars = m * g_Mars * h_Mars
Since we are assuming the same mass on both Earth and Mars, we can set the potential energies on Earth and Mars equal to each other and solve for h_Mars:
m * g_Earth * h_Earth = m * g_Mars * h_Mars
h_Mars = (g_Earth / g_Mars) * h_Earth
Now we can substitute the values and calculate the height you would be able to jump on Mars:
h_Mars = (9.8 m/s^2 / g_Mars) * 1 m
To know more about potential energy refer here
https://brainly.com/question/14294569#
#SPJ11
Bob has been asked to produce a fuse that has 3. 2 ohms of resistance. He cannot change he thickness of the wire but can change its length. Explain in detail how bob could work out what length of wire to use. You will need to describe the experiment he will need to carry out , any hazards and any variables involved
The wire's resistance at different lengths and analyzing the data, Bob can determine the appropriate length of wire needed to achieve a resistance of 3.2 ohms.
To determine the length of wire Bob needs to achieve a resistance of 3.2 ohms, he can perform an experiment using the wire to measure its resistance at different lengths. Here's a step-by-step explanation of how Bob can carry out the experiment:
1. Gather materials: Bob will need the wire, a power supply (e.g., a battery), an ammeter (to measure current), and a voltmeter (to measure voltage). Ensure all equipment is properly calibrated and suitable for the current and voltage levels.
2. Design a circuit: Bob should set up a simple circuit consisting of the power supply connected in series with the wire, the ammeter to measure the current passing through the wire, and the voltmeter connected across the wire to measure the voltage drop.
3. Safety precautions: It is important for Bob to follow safety protocols while conducting the experiment. He should handle the wire and electrical equipment with care, avoid touching exposed wires, and ensure the circuit is properly insulated. Additionally, he should wear appropriate safety gear such as gloves and goggles.
4. Initial wire length: Bob should start with an initial length of wire and measure its resistance using a multimeter or an ohmmeter. This measurement will serve as the baseline value.
5. Adjusting wire length: Bob can then modify the length of the wire by cutting or extending it. For each length, he needs to ensure the wire is securely connected in the circuit.
6. Recording data: At each wire length, Bob should record the current (I) and voltage (V) values from the ammeter and voltmeter, respectively. These readings will help him calculate the resistance using Ohm's law: R = V/I.
7. Repeat measurements: Bob should repeat the measurements for several different wire lengths to gather enough data points to analyze and determine a trend.
8. Data analysis: Bob can plot a graph of wire length (x-axis) against resistance (y-axis) using the recorded data. By observing the relationship between wire length and resistance, he can identify the length of wire that corresponds to a resistance of 3.2 ohms.
Variables and Hazards:
Independent variable: Wire length. Bob can manipulate this variable by changing the wire's length.
Dependent variable: Resistance. Bob will measure this variable and use it to determine the relationship with the wire length.
Control variables: Bob should keep other factors constant throughout the experiment, such as the thickness of the wire and the material used.
Hazards: The main hazards involved in this experiment are electrical hazards, including electric shock and short circuits. Bob should ensure the circuit is properly insulated, handle the wires and equipment safely, and follow electrical safety guidelines.
To know more about resistance refer here
https://brainly.com/question/30799966#
#SPJ11
QUESTION 2
A model airplane with mass, m = 0. 50 kg is tethered by a wire so that it flies in a circle 0. 20 m in radius. The airplane engine provides a net thrust of
0. 6 N perpendicular to tethering wire. Find the angular acceleration of the airplane when it is level flight. (Take moment of inertia I = mr2
O a.
12. 6 rad/ s2
Ob. 0. 58 rad/s2
Oc.
5. 08 rad/ s
od 6 rad/s?
The net force acting on the airplane is the centripetal force required to keep the airplane moving in a circular path. The angular acceleration of the airplane is 12.25 [tex]rad/s^2.[/tex]
The centripetal force is given by:
[tex]F = m * a_c[/tex]
where
F is the net force,
m is the mass of the airplane, and
[tex]a_c[/tex] is the centripetal acceleration.
The centripetal acceleration is given by:
[tex]a_c = v^2 / r[/tex]
where
v is the speed of the airplane and
r is the radius of the circle.
Since the airplane is in level flight, the net thrust of the engine is perpendicular to the tethering wire.
Therefore, it does not contribute to the centripetal force. The centripetal force is provided by the tension in the wire.
The tension in the wire is given by:
[tex]T = F_c = m * a_c[/tex]
where [tex]F_c[/tex] is the centripetal force.
The angular acceleration of the airplane is given by:
[tex]\alpha = a_c / r[/tex]
Substituting the values given:
[tex]F_c = m * a_c[/tex]
= T = 0.6 N
[tex]a_c = v^2 / r[/tex]
[tex]0.6 N = m * v^2 / r[/tex]
[tex]v^2 = F_c * r / m[/tex]
[tex]v = \sqrt{ (F_c * r / m)[/tex]
[tex]=\sqrt{(0.6 N * 0.2 m / 0.5 kg)[/tex]
= 0.49 m/s
[tex]a_c = v^2 / r[/tex]
= 0.49 m/s / 0.2 m
= 2.45 [tex]m/s^2[/tex]
[tex]\alpha = a_c / r[/tex]
[tex]= 2.45 m/s^2 / 0.2 m[/tex]
= 12.25 [tex]rad/s^2[/tex]
Therefore, the angular acceleration of the airplane is 12.25 [tex]rad/s^2.[/tex]
To know more about centripetal force refer here
brainly.com/question/14249440#
#SPJ11
Suppose that water waves coming into a dock have a velocity of 1.2 m/s and a wavelength of 2.4 m. with what frequency do these waves meet the dock
The frequency with which these waves meet the dock is 0.5 Hz.
To calculate the frequency of the water waves meeting the dock, you can use the formula:
Frequency (f) = Velocity (v) / Wavelength (λ)
Given that the velocity (v) is 1.2 m/s and the wavelength (λ) is 2.4 m, you can plug in these values into the formula:
f = 1.2 m/s / 2.4 m
f = 0.5 Hz
So, the frequency with which these waves meet the dock is 0.5 Hz.
To learn more about frequency, refer below:
https://brainly.com/question/5102661
#SPJ11
"an object with a mass of 0.20 kg has an acceleration of 5.0 m/s^2 when an unbalanced force of 1.0 n is applied to it" can be explained by newton's second law.
F = (0.20 kg) x (5.0 [tex]m/s^{2}[/tex]) = 1.0 N, which is the same as the applied unbalanced force.
Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
The given situation describes an object with a mass of 0.20 kg experiencing an acceleration of 5.0 [tex]m/s^{2}[/tex] when an unbalanced force of 1.0 N is applied to it.
The net force acting on the object can be calculated using the equation F = ma, where F is the net force, m is the mass, and a is the acceleration.
Therefore, F = (0.20 kg) x (5.0 [tex]m/s^{2}[/tex]) = 1.0 N, which is the same as the applied unbalanced force.
This illustrates that the acceleration of the object is directly proportional to the force applied to it, in accordance with Newton's second law of motion.
To know more about Newton's second law, refer here:
https://brainly.com/question/13447525#
#SPJ11
Find the mass of a circular moving object that has a centripetal force of 1345 N and an acceleration of 36. 2 m/s2?
Ruichao is spinning her backpack around and around. If her backpack has a mass of 8 kg, what centripetal acceleration would it have if she applies a centripetal force of 120 N?
Callum is playing tetherball. The tetherball has a mass of 0. 4 kg and has a tangential velocity of 2. 4 m/s. If the tetherball rope is 1. 5 m long, what centripetal force does Callum’s tetherball have?
Melissa and Cody are on a fun fair ride that spins them in a circle with radius 6 meters. If Melissa has a mass of 55 kg and Cody has a mass of 65 kg, what centripetal force will they have together if they have an acceleration of 2. 2 m/s2?
Bethany is swinging her grocery bag as she walks. The radius of her swing is 0. 8 m. If she can provide a tangential velocity of 2. 7 m/s and a centripetal force of 68 N, what centripetal accel-eration will her groceries have?
The mass of the object can be found using the formula: m = 37.1 kg and a = 9.13 m/s, and force F = 1.92 N.
1. Mass Finding: Let F = ma =[tex]mv^2/r[/tex]
F is the centripetal force, m is the mass of the object, v is the velocity and r is the radius of the circular path.
Plugging in the given values, we get:
1345 N = m x 36.2 m/s
m = 37.1 kg
a = [tex](2.4 m/s)^2/1.5 m[/tex]
a = 3.84 m/s
2. The centripetal force can be found using the formula:
F = [tex]mv^2/r,[/tex] where m is the mass of the tetherball, v is its tangential velocity and r is the length of the tetherball rope.
Plugging in the given values, we get:
F = [tex]0.4 kg * (2.4 m/s)^2/1.5 m[/tex]
F = 1.92 N
The centripetal force experienced by Melissa and Cody together can be found using the formula:
3. F = (m1 + m2) x a x r, where m1 and m2 are the masses of Melissa and Cody respectively, a is the centripetal acceleration and r is the radius of the circular path.
Plugging in the given values, we get:
F = (55 kg + 65 kg) x 2.2 m/s x 6 m
F = 2376 N
68 N = m x (2.7 m/s)/0.8 m
m = 7.24 kg
a = (2.7 m/s)/0.8 m
a = 9.13 m/s
Learn more about mass Visit: brainly.com/question/86444
#SPJ4
Two bumper cars collide into each other and each car jolts backwards this is an example of which of newtons laws?
When two bumper cars collide into each other and each car jolts backwards, this is an example of: Newton's Third Law of Motion also known as the law of action and reaction.
Newton's Third Law states that for every action, there is an equal and opposite reaction. In the case of the bumper cars, when they collide, the force exerted by Car A on Car B (the action) is equal in magnitude and opposite in direction to the force exerted by Car B on Car A (the reaction).
This is why both cars experience a jolt in opposite directions after the collision.
To recap, the situation you described with the two bumper cars colliding and jolting backwards is an example of Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.
This law helps us understand the behavior of objects during collisions and interactions, and it plays a crucial role in understanding the principles of physics.
To know more about Third Law of Motion, refer here:
https://brainly.com/question/29768600#
#SPJ11
AM radio stations are assigned frequencies in the range between 550 and 1600KHz. The speed of radio waves is 300000000 m/s. What wavelengths do these radio signals span?
The wavelengths of AM radio signals span from 545.45 meters to 187.5 meters.
The wavelength of a radio wave is given by the formula:
wavelength = speed of light / frequency
where the speed of light is approximately 300,000,000 meters per second.
For AM radio stations, the frequency range is between 550 and 1600 kilohertz (kHz), or 550,000 and 1,600,000 hertz (Hz), respectively.
So, to find the wavelength of these radio signals, we can use the above formula for the minimum and maximum frequencies:
Minimum wavelength = speed of light / minimum frequency
= 300,000,000 / 550,000
= 545.45 meters
Maximum wavelength = speed of light / maximum frequency
= 300,000,000 / 1,600,000
= 187.5 meters
To know more about wavelength refer here
https://brainly.com/question/31143857#
#SPJ11
Write an equation for the strength of the electrostatic force for two charges that are separated by 10 meters. Use the Gizmo to check your equation
F = k * ([tex]q_1[/tex][tex]q_2[/tex])/[tex]r^{2}[/tex], where F is the strength of the electrostatic force, k is Coulomb's constant (9X[tex]10^{9}[/tex] N*[tex]m^{2}[/tex]/[tex]C^{2}[/tex]), [tex]q_1[/tex] and [tex]q_2[/tex] are the charges, and r is the distance between the charges in meters.
What is Magnetic Force?
Magnetic force is a fundamental force of nature that is exerted between moving charged particles, such as electrons or between a magnetic field and a moving charge. This force can cause a magnetic material to experience a force of attraction or repulsion depending on its orientation with respect to the magnetic field.
Using the Gizmo to check, we can input two charges and a distance of 10 meters to calculate the electrostatic force between them. The result should match the output of the equation F = k * ([tex]q_1[/tex]*[tex]q_2[/tex])/[tex]r^{2}[/tex].
To learn more about Magnetic Force, visit;
https://brainly.com/question/14411049
#SPJ4
6 points
A van traveling with constant velocity of 15 m-s1 passes a pedestrian crossing zone, where the speed limit is 10. M-5-1. Just as the van passes, a JMPD police
officer on a motorcycle stopped at the crossing starts off in pursuit with constant acceleration of 3. 0 m. 5-2
Save Answer
(a) How much time elapses before the officer catches up with the van? (2 marks)
(b) What is the officer's speed at that point? (2 marks)
(c) What is the total distance each vehicle has traveled at that point? (2 marks)
The total distance traveled by the van is 75 meters and the total distance traveled by the police officer is 37.5 meters at the point of catching up with the van.
What is Velocity?
Velocity is a physical quantity that describes the rate at which an object changes its position with respect to time. It is a vector quantity, which means it has both magnitude and direction. The magnitude of velocity is the speed of the object, while the direction of velocity is the direction in which the object is moving.
The van's speed is greater than the speed limit, so it will maintain a constant speed of 15 m/s. The police officer starts from rest and has a constant acceleration of 3.0 m/[tex]s^{2}[/tex]. Let's denote the time it takes for the police officer to catch up to the van as t. Using the equation of motion for the police officer's velocity, we have:
[tex]v_{police[/tex] = [tex]a_{police * t[/tex]
Using the equation of motion for the van's displacement, we have:
[tex]d_van[/tex]= [tex]v_van * t[/tex]
At the point when the police officer catches up with the van, their displacements will be equal, so we can set these two equations equal to each other and solve for t:
v_[tex]v_{police * t[/tex] = [tex]d_{van[/tex]
[tex]a_{police[/tex] *[tex]t^{2}[/tex] = [tex]v_{van[/tex] * t
3.0 * t^2 = 15 * t
t = 5 seconds
Therefore, it will take the police officer 5 seconds to catch up with the van.
(b) To find the officer's speed at that point, we can use the equation of motion for the police officer's displacement:
[tex]d_{police[/tex] = (1/2) *[tex]a_{police[/tex] *
[tex]d_{police[/tex] = (1/2) * 3.0 * [tex]5^{2}[/tex]
[tex]d_{police[/tex] = 37.5 m
Using the time t = 5 seconds, we can now find the officer's speed at that point using the equation:
[tex]v_{police[/tex]= [tex]a_{police[/tex] * t
[tex]v_{police[/tex] = 3.0 * 5
[tex]v_{police[/tex] = 15 m/s
Therefore, the officer's speed at the point of catching up with the van is 15 m/s.
(c) To find the total distance each vehicle has traveled at that point, we can use the equations of motion for each vehicle:
[tex]d_{van[/tex] = [tex]v_{van[/tex] * t
[tex]d_{police[/tex] = (1/2) * [tex]a_{police[/tex] * [tex]t^{2}[/tex]
Using the time t = 5 seconds, we can substitute the values of [tex]v_{van[/tex] and [tex]a_{police[/tex]:
[tex]d_{van[/tex] = 15 * 5
[tex]d_{van[/tex]= 75 m
[tex]d_{police[/tex]= (1/2) * 3.0 *[tex]5^{2}[/tex]
[tex]d_{police[/tex]= 37.5 m
To know more about Velocity visit;
https://brainly.com/question/80295
#SPJ4
A blower door assembly uses a(n) _____ to measure pressure
A blower door assembly is a device used to test the airtightness of buildings. It consists of a fan, a frame that fits into a doorway, and various instruments for measuring airflow and pressure.
One of the key components of a blower door assembly is a pressure measuring instrument, which is used to determine the difference in air pressure between the inside and outside of the building.
The pressure measuring instrument used in a blower door assembly is typically a manometer. A manometer is a device that measures pressure by comparing the pressure of a fluid, such as mercury or water, in a vertical column to a reference pressure. In a blower door assembly, the manometer is connected to hoses that are attached to the fan and the frame. The fan blows air out of the building, creating a pressure differential between the inside and outside. The manometer measures the pressure difference and displays it on a digital or analog readout.
The pressure measurement is an important aspect of the blower door test, as it can help identify areas where air leakage is occurring. By measuring the pressure difference between the inside and outside of the building, the blower door assembly can help identify areas where the air is escaping or entering the building. This information can be used to improve the energy efficiency of the building by sealing air leaks and reducing energy consumption.
To learn more about pressure
https://brainly.com/question/29341536
#SPJ4
he difference between mass and weight. *
Two identical insulated metal spheres are equally charged and separated by a distance of 0. 1 m. The resulting force between the spheres is 8. 1 x 10^-8N. What is the force if the size of each change is tripled? Show your calculation.
Two charged metal spheres are separated by 0.1m and have a force of [tex]8.1 \times 10^{-8}N[/tex] between them. If the size of the charges is tripled, the force between them will increase to [tex]7.29 \times 10^{-7}N[/tex].
The force between two charged spheres is given by Coulomb's Law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
Therefore, if the size of each charge is tripled, the force between the spheres will increase by a factor of 9, since the product of the charges is now three times greater.
To calculate the force, we can use the formula [tex]F = kQ1Q2/d^2[/tex], where k is the Coulomb constant, Q1 and Q2 are the charges on the spheres, and d is the distance between them. Since the spheres are identical and equally charged, we can represent their charges as Q and Q, respectively.
Substituting the given values, we get:
[tex]8.1 \times 10^{-8} = kQ^2/0.1^2[/tex]
Solving for Q, we get:
Q = [tex]\sqrt{(8.1 \times 10^{-8} \times 0.1^2 / k)}[/tex]
Q = [tex]3 x 10^{-8} C[/tex]
Now, if we triple the size of each charge, the force between the spheres will be:
F' = [tex]k(3Q)^2/0.1^2[/tex]
F' = [tex]9kQ^2/d^2[/tex]
F' = [tex]9(8.1 \times 10^{-8})[/tex]
F' = [tex]7.29 \times 10^{-7} N[/tex]
Therefore, the force between the spheres will increase from [tex]8.1 \times 10^{-8}N[/tex] to [tex]7.29 \times 10^{-7}N[/tex] if the size of each charge is tripled.
In summary, the force between two charged spheres is proportional to the product of their charges and inversely proportional to the square of the distance between them. If the size of each charge is tripled, the force between the spheres will increase by a factor of 9.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
31. Two parallel rails with negligible resistance are 10. 0 cm apart and are connected by a 5. 00 ohm resistor. The circuit also contains two metal rods having resistances of 10. 0 ohm and 15. 0 ohm sliding along the rails (Fig. P31. 31). The rods are pulled away from the resistor at constant speeds of 4. 00 m/s and 2. 00 m/s, respectively. A uniform magnetic field of magnitude 0. 0100 T is applied perpendicular to the plane of the rails. Determine the current in the 5. 00 ohm resistor.
question taken from physics for scientists and engineers, 6th edition. Chapter 31, q. 31
The current in the 5.00 ohm resistor is 0.052 A.
The induced emf in each metal rod is given by e = Blv, where B is the magnetic field strength, l is the length of the metal rod moving in the magnetic field, and v is the velocity of the rod. For the 10.0 ohm rod, the induced emf is e = (0.0100 T)(0.100 m)(4.00 m/s) = 0.00400 V. The current through the 10.0 ohm rod is then I1 = e/R1 = 0.000400 A.
For the 15.0 ohm rod, the induced emf is e = (0.0100 T)(0.100 m)(2.00 m/s) = 0.00200 V. The current through the 15.0 ohm rod is then I2 = e/R2 = 0.000133 A. Since the two rods are connected in series, the current through the 5.00 ohm resistor is the same as the current through the two rods: I = I1 + I2 = 0.000533 A.
Using Ohm's law, the voltage drop across the 5.00 ohm resistor is V = IR = (0.000533 A)(5.00 ohm) = 0.00266 V. Therefore, the current in the 5.00 ohm resistor is I = V/R = (0.00266 V)/(5.00 ohm) = 0.052 A.
To know more about the Parallel, here
https://brainly.com/question/31272540
#SPJ4
The force of attraction that a -40. 0 μc point charge exerts on a 108 μc point charge has magnitude 4. 00 n. How far apart are these two charges? (k = 1/4πε0 = 8. 99 × 109 n ∙ m2/c2) show your work
The force of attraction that a -40. 0 μc point charge exerts on a 108 μc point charge has magnitude 4 N. then these two charges are apart by the distance 3.11 m.
According to the law, the strength of the electrostatic force of attraction or repulsion between two point charges is inversely proportional to the square of the distance between them and directly proportional to the product of the magnitudes of the charges. Coulomb investigated the repellent force between things with identical electrical charges:
Given,
q₁ = 40 × 10⁻⁶ C
q₂ = 108 × 10⁻⁶ C
F = 4 N
1/4πε0 = 8. 99 × 10⁹
Coulomb's law is given by,
F = q₁q₂ ÷ 4π∈r²
4 N = - 40 × 10⁻⁶ C × 108 × 10⁻⁶ C × 8. 99 × 10⁹ ÷ r²
4 N = 38.83÷ r²
r² = 38.83÷ 4
r² = 9.7
r = 3.11 m
To know more about Force :
https://brainly.com/question/13191643
#SPJ1.
A storage tank contains petrol to a height of 4. 7m. If the pressure at the base of the tank is "32. 3" kPa, determine the density of the petrol. Take the acceleration due to gravity to be 9. 81ms^-2.
The density of the petrol in the storage tank is approximately: 703 kg/m³.
To determine the density of the petrol in a storage tank with a height of 4.7m and a pressure at the base of 32.3 kPa, we can use the following formula:
Pressure = Density × Gravity × Height
Where Pressure is given as 32.3 kPa, Gravity is 9.81 m/s² (as provided), and Height is 4.7m. To find the density, we can rearrange the formula as follows:
Density = Pressure / (Gravity × Height)
Now, we can plug in the values:
Density = 32,300 Pa / (9.81 m/s² × 4.7m)
Density ≈ 703 kg/m³
Therefore, the density of the petrol in the storage tank is approximately 703 kg/m³.
To know more about density, refer here:
https://brainly.com/question/28929608#
#SPJ11
Complete question:
A storage tank contains petrol to a height of 4. 7m. If the pressure at the base of the tank is "32. 3" kPa, determine the density of the petrol. Take the acceleration due to gravity to be 9. 81ms⁻².
How much is the rod stretched (change in length of ΔL ) when the ride is at rest? (Figure 2)Assume that each airplane with two riders has a total weight of 1900 N and that the rods are vertical when the ride is at rest.
According to the question the rod is stretched by 0.0009 mm when the ride is at rest.
What is length?Length is the measurement of the size of an object or the distance between two points. It is typically measured in units of length such as centimeters, meters, or feet. Length is also used to describe a physical dimension or an abstract concept such as time or distance. In mathematics, length is a fundamental concept that is used in various areas of study, including geometry, calculus, and trigonometry.
The total weight of the two riders is 1900 N, and the rod is vertical when the ride is at rest. To calculate the change in length of the rod (ΔL), we must use the equation:
ΔL = W/AE
Where W is the weight, A is the area of the cross-sectional rod, and E is the Young's Modulus of the material.
For a steel rod with a circular cross section, the area A is equal to πr2, where r is the radius of the rod. Assuming that the rod is 10 mm in diameter, the radius is 5 mm, and the area is approximately 78.5 mm2.
The Young's Modulus of steel is approximately 200 GPa.
Plugging these values into the equation, we get:
ΔL = (1900 N) / (200 GPa)(78.5 mm²)
ΔL = 0.0009 mm
Therefore, the rod is stretched by 0.0009 mm when the ride is at rest.
To learn more about length
https://brainly.com/question/28615861
#SPJ4
A spring is stretched 0. 50 m and the force was 30000 N. What is the spring constant?
The spring constant for this particular spring is 60,000 N/m.
To calculate the spring constant (k) for a spring, you can use Hooke's Law, which states that the force (F) required to stretch or compress a spring by a certain distance (x) is proportional to that distance. The formula for Hooke's Law is:
F = k * x
In your question, the spring is stretched 0.50 m (x) and the force applied is 30,000 N (F). We need to find the spring constant (k). To do this, we can rearrange the formula:
k = F / x
Now, we can plug in the given values:
k = 30,000 N / 0.50 m
k = 60,000 N/m
So, the spring constant for this particular spring is 60,000 N/m. This value represents the stiffness of the spring, meaning that it takes 60,000 Newtons of force to stretch the spring by one meter. A higher spring constant indicates a stiffer spring, whereas a lower spring constant means the spring is more easily stretched or compressed. In this case, the spring is relatively stiff, requiring a substantial amount of force to change its length.
For more about spring constant:
https://brainly.com/question/20388857
#SPJ11
In a series circuit, how will the potential difference across a resistor and a lamp change if a switch is closed?
Because the total voltage supplied by the battery is distributed among all the components in a series circuit, if a switch is closed, the potential difference across the resistor and bulb will remain unchanged.
What happens in a series circuit if the switch is closed?The light cannot be turned on when the switch is open because the circuit is incomplete. The circuit lacks a closed-loop channel for the current to follow.
When resistors are connected in series, what happens to the potential difference?The potential difference between the two extremes of the arrangement in a series connection of resistors is equal to the total of the potential differences across individual resistors.
To learn more about series circuit visit:
brainly.com/question/11409042
#SPJ9
Rolanda sees an error in her friend’s graphic organizer comparing electrical and gravitational forces. a venn diagram with two intersecting circles. the circle on the left is labeled gravitational force. the circle on the right is labeled electrical force. there is an x in the circle on the left with infinite reach and depends on mass. in the circle on the right is z with depends on charge. there is a y in the intersecting area. which change should rolanda suggest to her friend to correct the error? the note about mass belongs in region z, and the note about charge belongs in region x. the note about mass belongs in region y, and the note about infinite reach belongs in region z. the note about charge belongs in region y. the note about infinite reach belongs in region y.
Rolanda needs to advise her friend to place the note about mass in region z and the note about charge in region x to fix the mistake in the Venn diagram. Therefore, the correct answer is option A.
Rolanda should suggest to her friend that the note about mass belongs in region z, and the note about charge belongs in region x. This correction is necessary because gravitational force depends on mass, while electrical force depends on charge.
The x in the circle on the left with infinite reach and depends on mass is incorrect because gravitational force does not have infinite reach. It only acts between objects with mass that are in close proximity to each other. The y in the intersecting area is also incorrect because there is no force that is common to both gravitational and electrical forces.
On the other hand, the z in the circle on the right with depends on charge is correct because electrical force depends on the charge of the objects involved. By suggesting that the note about mass belongs in region z and the note about charge belongs in region x, the Venn diagram will accurately represent the differences between gravitational and electrical forces.
In summary, Rolanda should suggest to her friend that the note about mass belongs in region z and the note about charge belongs in region x. Therefore, the correct answer is option A.
This will correct the error in the Venn diagram and accurately represent the differences between gravitational and electrical forces. It is important to understand these differences in order to properly understand the behavior of objects in our world.
To know more about Venn Diagram refer here:
https://brainly.com/question/29301560#
#SPJ11
A conducting coil of 2250 turns is connected to a galvanometer, and the total resistance of the circuit is 30 ω. the area of each turn is 5. 00 × 10-4 m2. this coil is moved from a region where the magnetic field is zero into a region where it is nonzero, the normal to the coil being kept parallel to the magnetic field. the amount of charge that is inducedto flow around the circuit is measu
When a conducting coil is moved into a region with a magnetic field, an electromotive force (EMF) is induced in the coil, which causes a current to flow through the circuit.
The magnitude of the induced EMF can be calculated using Faraday's law of electromagnetic induction, which states that the induced EMF is equal to the rate of change of magnetic flux through the coil.
In this case, the coil has 2250 turns and an area of 5.00 × 10^-4 m^2 per turn. If the coil is moved into a region with a magnetic field, the magnetic flux through the coil will change, inducing an EMF in the circuit.
Assuming that the normal to the coil is parallel to the magnetic field, the magnitude of the induced EMF can be calculated as follows:
EMF = -N(dΦ/dt)
where N is the number of turns in the coil and dΦ/dt is the rate of change of magnetic flux through the coil.
The magnetic flux through the coil is given by:
Φ = BA
where B is the magnetic field strength and A is the area of the coil.
Assuming that the magnetic field is uniform and perpendicular to the coil, the magnetic flux through the coil can be written as:
Φ = BNA
The rate of change of magnetic flux through the coil is given by:
dΦ/dt = BNA(v/A) = BNV
where v is the velocity of the coil.
Substituting the values given, we get:
EMF = -2250(5.00 × 10^-4 m^2)(B)(V)/30 Ω
The negative sign indicates that the direction of the induced EMF is opposite to the change in magnetic flux.
The amount of charge that flows around the circuit can be calculated using the equation:
Q = EMF/R
where R is the total resistance of the circuit.
Substituting the values given, we get:
Q = (-2250)(5.00 × 10^-4 m^2)(B)(V)/(30 Ω)
Therefore, the amount of charge induced to flow around the circuit depends on the strength of the magnetic field, the velocity of the coil, and the resistance of the circuit.
To know more about induced EMF refer here
https://brainly.com/question/16764848#
#SPJ11
PLS ANSWER ASAP
1. A gardener uses a wheelbarrow to move 20 kilograms of soil from a compost pile to a flower bed, a distance of 53 meters. The wheelbarrow has a mass of 17 kilograms. he expands 94.5 Newtons of forced. How much work does the gardener do? (1 point)
O 135.4 N
O 5,008.5 N
O 1,961 N
O 3,496 N
2. A force of 30 N is applied to a ball, and it takes the balls 1.5 seconds to travel 4 meters. What is the work done on the ball? (1 point)
O 45 J
O 80 J
O 120 J
O 180 J
3. A mechanic wants to use a compound pulley to lift a go-kart from the ground to work table, a distance of 1.2 meters. Without the pulley, 1,620 Newtons of force would be needed to lift the go-kart. If the pulley has a mechanical advantage of 4, how much force must the mechanic expend? (1 point)
O 1,616 N
O 405 N
O 5,400 N
O 1,350 N
The gardener does a work of 5,008.5 J
The work done is 120 J
The force exerted is 405 N
Work is defined as the product of the force applied to an object and the distance it moves in the direction of that force. In other words, work is done when a force causes an object to move in the same direction as the force. The formula for work is W = F x d,
Given that;
W = Fd
F = force
d = distance
W = work done
Thus;
W = 94.5 N * 53 m
= 5,008.5 J
2) W = Fd
W = 30 N * 4 m
= 120 J
3) MA = 1620/x
x = 1620/4
x = 405 N
Learn more about work done:https://brainly.com/question/13662169
#SPJ1
when it is a few centimetres away from the rod, the ball is briefly touched by a wire connected to earth.
in terms of the movement of charges, describe what happens to the charge on the ball.
Answer:
Explanation:
are a great explanation for this. You could also actually learn something instead of searching sutff up. U will be a fialure i tell you.
Which of the receptors are the mechanoreceptors that detect motion and sense gravity?.
Together, the semicircular canals and otolith organs in the inner ear act as mechanoreceptors, enabling us to detect motion, perceive changes in head position, and maintain a sense of balance and spatial orientation.
The mechanoreceptors that detect motion and sense gravity are primarily found in the inner ear. These mechanoreceptors are known as vestibular receptors and play a crucial role in maintaining balance, detecting changes in head position, and sensing acceleration and deceleration.
The vestibular receptors consist of two main structures:
1. Semicircular Canals: There are three semicircular canals in each inner ear, oriented in different planes. These canals are filled with fluid and contain hair cells with specialized structures called the ampullae. When the head moves, the fluid within the canals also moves, which deflects the hair cells and triggers nerve impulses. This allows the brain to perceive rotational movements in various directions.
2. Otolith Organs: The otolith organs in the inner ear consist of the utricle and saccule. They contain small calcium carbonate crystals called otoliths and hair cells. The otoliths, known as otoconia, rest on a gelatinous layer that covers the hair cells. When the head tilts, accelerates, or experiences gravitational forces, the otoliths move in response, leading to deflection of the hair cells. This deflection sends signals to the brain, providing information about head position, linear acceleration, and gravity.
To know more about mechanoreceptors refer here
https://brainly.com/question/31670884#
#SPJ11
An unknown force is applied to a 12 kg mass. The force acts at an angle of 30.0 degrees above the horizontal.
Determine the force acting if the force acts for a horizontal displacement of 22 meters and increases the 12 kg mass's
speed from 11 m/s to 26 m/s.
The force acting on the 12 kg mass would be 11 N.
To solve this problem, we need to use the work-energy principle, which states that the work done by a force on an object is equal to the change in the object's kinetic energy.
First, we need to calculate the initial and final kinetic energy of the 12 kg mass.
The initial kinetic energy is given by:
K₁ = (1/2) * m * v₁²
= (1/2) * 12 kg * (11 m/s)²
= 726 J
The final kinetic energy is given by:
K₂ = (1/2) * m * v₂²
= (1/2) * 12 kg * (26 m/s)²
= 936 J
The change in kinetic energy is:
ΔK = K₂ - K₁
= 936 J - 726 J
= 210 J
Next, we need to calculate the work done by the unknown force. We can do this by using the formula:
W = F * d * cosθ
where W is the work done, F is the force, d is the displacement, and θ is the angle between the force and displacement vectors.
In this case, the displacement is 22 meters, and the angle θ is 30 degrees. So we have:
W = F * d * cosθ
= F * 22 m * cos(30°)
= 19.1 F
Finally, we can use the work-energy principle to solve for the unknown force:
W = ΔK
19.1 F = 210 J
F = 11 N
Therefore, the force acting on the 12 kg mass is 11 N.
To know more about force
https://brainly.com/question/20888400
#SPJ1
What is the physical state of water at 250 degree centigrade
At 250 degrees Celsius, water is in the gaseous state, specifically as steam or water vapor.
Under normal atmospheric pressure, water boils and undergoes a phase transition from liquid to gas at 100 degrees Celsius. As the temperature increases beyond the boiling point, the water molecules gain enough energy to overcome intermolecular forces and transition into the gaseous state.
Therefore, at 250 degrees Celsius, water exists as a gas or steam rather than as a liquid.
The boiling point of water, where it transitions from liquid to gas, occurs at 100 degrees Celsius at standard atmospheric pressure (1 atmosphere or 101.3 kilopascals). At temperatures below the boiling point, water exists as a liquid.
Therefore, at 250 degrees Celsius, water is well above its boiling point. It would be in the form of a hot liquid rather than a gas. The high temperature causes the water molecules to have greater kinetic energy, resulting in increased movement and a higher average temperature of the liquid.
It's important to note that the state of water can change depending on the pressure. At higher pressures, the boiling point of water increases, and at lower pressures, it decreases.
However, under standard atmospheric pressure, water at 250 degrees Celsius would still remain in the liquid state.
To know more about atmospheric pressure refer here
https://brainly.com/question/31634228#
#SPJ11
Maintenance of military defense and the national parks system that must be renewed every year falls under which type of government spending
The maintenance of military defense and the national parks system that must be renewed every year falls under the category of government current spending, also known as government consumption.
Government current spending refers to the expenses incurred by the government on the day-to-day activities of providing public goods and services, such as education, healthcare, defense, and infrastructure maintenance.
This spending is financed through taxes and other forms of revenue collected by the government.
Government current spending is different from government capital spending, which involves investment in infrastructure, such as roads, bridges, and buildings.
To know more about military defense, refer here:
https://brainly.com/question/31747991#
#SPJ11