A box of weight 280 N is being pulled to the right by a pulling force vec F of magnitude 50 N. The box is moving at a constant speed of 0.84 m/s . To make an accurate free-body diagram of the box, the letter f in the diagram above should be replaced with the label
Answers
Answer:
what diagram. I can't see any
this is the graph for this equation
Related Questions
Which of these BEST explains how Earth's surface features are formed by moving tectonic plates? *
5 points
Earth's gravity acts as an opposing force, causing the crust to push upward, break into individual plates, and move along the surface.
The minerals in lithospheric plates are attracted to Earth's magnetic poles, which causes them to move along the surface.
The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Earth's crust is separated into individual plates that float on top of molten material, convection currents in the mantle cause them to slowly move.
Answers
Answer: The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Earth's surface forms because of this reason:
The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Name any two medium which states about the weather report.
Answers
Answer:
1. Government Agencies
2. Television Stations
Explanation:
Weather reports are needed by members of the public to be alert on daily and future weather trends as this would affect how they arrange their affairs. The weather can affect daily movement. For example, when it rains heavily, movement might become limited. Government agencies such as the National Weather Service (NWS), state the weather report.
Television channels like the Cable News Network have programs dedicated to weather reporting. The reporter states what the weather would be like in different cities and the public take note of that.
A car is initially moving at 10.5 m/s and accelerates uniformly to reach a speed of 21.7 m/s in 4.34 s. How far did the car move during this acceleration?
A. 69.9m
B. 6.99m
C. 69.6m/s
D. 6.99m/s
Answers
Answer:
A. 69.9m
Explanation:
Given parameters:
Initial velocity = 10.5m/s
Final velocity = 21.7m/s
Time = 4.34s
Unknown:
Distance traveled = ?
Solution:
Let us first find the acceleration of the car;
Acceleration = [tex]\frac{v - u}{t}[/tex]
v is final velocity
u is initial velocity
t is the time
Acceleration = [tex]\frac{21.7 - 10.5}{4.34}[/tex] = 2.58m/s²
Distance traveled;
V² = U² + 2aS
21.7² = 10.5² + 2 x 2.58 x S
360.64 = 2 x 2.58 x S
S = 69.9m
The changes that are visible during a chemical reaction are signs that the nuclei in the reactants have been rearranged.
Please select the best answer from the choices provided
ОТ
OF
Answers
Answer:
the answer is F
Explanation: I put T on the question and got it wrong so it's F on edge ;)
Se lanza una piedra de 3.00 N verticalmente hacia arriba desde el suelo. Se observa que, cuando está 15.0 m sobre el suelo, viaja a 25.0 m/s hacia arriba. Use el teorema trabajo-energía para determinar a) su rapidez en el momento de ser lanzada. b) su altura máxima
Answers
Answer:
(a). The speed at the moment of being thrown is 30.41 m/s.
(b). The maximum height is 47.18 m.
Explanation:
Given that,
Weight of stone = 3.00 N
Height = 15 m
Speed = 25.0 m/s
(a). We need to calculate the speed at the moment of being thrown
Using work energy theorem
[tex]W=\dfrac{1}{2}m(v_{2}^2-v_{1}^2)[/tex]
[tex]-mg\times d=\dfrac{1}{2}m(v_{2}^2-v_{1}^2)[/tex]
Put the value into the formula
[tex]-9.8\times15=\dfrac{1}{2}\times(v_{2}^2-v_{1}^2)[/tex]
[tex]-2\times9.8\times15=25^2-v_{1}^2[/tex]
[tex]-v_{1}^2=-300-25^2[/tex]
[tex]v_{1}=\sqrt{925}[/tex]
[tex]v_{1}=30.41\ m/s[/tex]
(b). We need to calculate the maximum height
Using work energy theorem
[tex][tex]W=\dfrac{1}{2}mv_{2}^2-\dfrac{1}{2}mv_{1}^2[/tex]
[tex]mg\times d=\dfrac{1}{2}mv_{2}^2-\dfrac{1}{2}mv_{1}^2[/tex]
Here, [tex]\dfrac{1}{2}mv_{2}^2[/tex]=0
[tex]-(mg)\times d=\dfrac{1}{2}mv_{1}^2[/tex]
[tex]d=\dfrac{v_{1}^2}{2g}[/tex]
Put the value into the formula
[tex]d=\dfrac{30.41^2}{2\times9.8}[/tex]
[tex]d=47.18\ m[/tex]
Hence, (a). The speed at the moment of being thrown is 30.41 m/s.
(b). The maximum height is 47.18 m.
A car is traveling down the highway cruise control at 50m/s (this means its is traveling with a constant velocity NOT accelerating). If it does this for 5 minutes (300s), how far does it travel?
Answers
Given parameters:
Speed of car = 50m/s
Time of travel = 5minutes (300s)
Unknown;
Distance of travel = ?
To solve this problem, we need to understand how speed relates with distance and time.
Speed is a physical quantity. It is the distance traveled divided by time taken.
Speed = [tex]\frac{distance}{time}[/tex]
So,
Distance = speed x time
Input the parameters and solve for the distance;
Distance = 50m/s x 300s
Distance = 15000m
The distance covered during this time interval and speed is 15000m
________are muscles connected to the skeleton.
1.) Smooth muscles
2.) Skeletal muscles
3.) Strong muscles
4.) Cardiac muscles
Answers
Answer: Skeletal Muscles
Explanation:
Skeletal muscles are attached to the skeleton by tough connective tissues called tendons
A 4kg block and a 2kg block can move on horizontal frictionless surface. The blocks are accelerated by a +12-N force that pushes the large block against the smaller one.'
a) Determine the force that the 2kg block exerts on the 4kg block
b) Determine the force that the 4kg block exerts on the 2kg block.
Answers
Answer:
a) -4 N
b) +4 N
Explanation:
Draw a free body diagram for each block.
For the large block, there are 2 forces: 12 N pushing to the right, and F pushing to the left.
For the small block, there is 1 force, F pushing to the right.
There are also weight and normal forces in the vertical direction, but we can ignore those.
Sum of forces on the large block in the x direction:
∑F = ma
12 − F = 4a
Sum of forces on the small block in the x direction:
∑F = ma
F = 2a
2F = 4a
Substitute:
12 − F = 2F
12 = 3F
F = 4
The small block pushes on the large block 4 N to the left (-4 N).
The large block pushes on the small block 4 N to the right (+4 N).
8. An object accelerates 12.0 m/s2 when a force of 6.0 newtons is applied to it. What is the mass of the object? ___________________________
Answers
Answer:
Mass of object is 0.5kg
Explanation:
Given the following data;
Force = 6N
Acceleration = 12m/s²
Mass =?
Force is given by the multiplication of mass and acceleration.
Mathematically, Force is;
[tex] F = ma[/tex]
Where;
F represents force.
m represents the mass of an object.
a represents acceleration.
Making mass (m) the subject, we have;
[tex]Mass (m) = \frac{F}{a}[/tex]
Substituting into the equation;
[tex]Mass (m) = \frac{6}{12}[/tex]
Mass, m = 0.5kg.
Therefore, the mass of the object is 0.5kg
An athlete starts running from rest such that he covers a distance of 5mm in 0.50s with a constant change in velocity per unit time . when will he reach the finish line, if he is running a race of 50m?
Answers
Answer:
50 s
Explanation:
Given:
Δx = 0.005 m
v₀ = 0 m/s
t = 0.50 s
Find: a
Δx = v₀ t + ½ at²
0.005 m = (0 m/s) (0.50 s) + ½ a (0.50 s)²
a = 0.04 m/s²
Given:
Δx = 50 m
v₀ = 0 m/s
a = 0.04 m/s²
Find: t
Δx = v₀ t + ½ at²
50 m = (0 m/s) t + ½ (0.04 m/s²) t²
t = 50 s
______________ rock forms beneath Earth's surface.
Answers
Answer:
Igneous rocks form beneath Earth's surface.
Explanation:
Igneous rocks form beneath the Earth's surface
It is required to design a zener shunt regulator to provide a regulated voltage of about 10 V. The available 10-V, 1-W zener of type 1N4740 is specified to have a 10-V drop at a test current of 25 mA. At this current, its r z is 7 . The raw supply, V S , available has a nominal value of 20 V but can vary by as much as ±25%. The regulator is required to supply a load current of 0 mA to 20 mA. Design for a minimum zener current of 5 mA.
Answers
Answer:
jgfsdghjjuk
Explanation:
khhnghjj
Do Now: You are asked to go to downtown Newark and pick up a small bag of materials for a grant project. Pay is $25. The materials will be delivered to Room 224, 2nd floor in Barringer High School. Create a numbered procedure, a list of steps that you will take to pick up and deliver the materials. Click for Example
Answers
Answer:
sorry im not in physics
Explanation:
Anyone get this can you please help me, can you also please do it step by step
Answers
Answer:
7.69 hours
Explanation:
3 hr/ 1000mi x 130mi = 7.69 hours or 7.7 hours
Explain Kinetic and potential energy
Answers
Answer:
Energy implies as the object’s capability to perform work. It is something that cannot be created or destroyed but can only be transformed. An object loses its energy, when it performs work, whereas it gains energy when the work is performed on it. Energy is broadly classified as kinetic energy and potential energy. While kinetic energy is the energy which an object contains because of a particular motion.
On the other hand, potential energy is the stored energy, because of its state of rest. As both the two forms of energy are measured in joules, people get easily confused between these two. So, take a read of the article which will help you to understand the differences between kinetic and potential energy.
Explanation:
Hope this helps - Good luck ^w
Answer:
Energy stored in an object due to its position is Potential Energy. · Energy that a moving object has due to its motion is Kinetic Energy.
Explanation:
a dog walks 14 meters to the east and then 20 meters back to the west.
Answers
Answer:
who gets theses questions XD
Explanation:
what does it mean mechanical advange is less than one?
Answers
Answer:
this happens when the input force is greater than the output force
HOPE IT HELPED YOU...
me·chan·i·cal ad·van·tage
noun
the ratio of the force produced by a machine to the force applied to it, used in assessing the performance of a machine.
Q7 Describe two types of atomic change that produce electromagnetic
waves.
Answers
When an electron drops from a higher energy level to a lower energy level an electromagnetic wave is give off.
What is the velocity of a car that travelled a total of 75 km north in 1.5 hrs?
Answers
Since d=75km=75000m
t=1.5h=3600*1.5= 5400s
=>V=75000*5400
=405000000m/s=4.05*10^8m/s
If the radio waves that are sent from the speed gun have a frequency of 400,000,002 Hz and the radio waves reflected off an approaching car have a frequency of 400,000,109 Hz, what is the speed of the car? (Hz is the SI unit of frequency, equal to cycles per second).
Answers
Answer:
40.1 m/s or 144.36 km/h
Explanation:
The equation is (v=∆ f/f) x (c/2)
V is velocity
delta f is returned frequency minus intial frequency divided by the initial frequency
c is the speed of light in m/s divided by 2
v= (400,000,109 Hz - 400,000,002 Hz)/400,000,002Hz x (299,792,458 m/s)/2
An____ collision occurs when an arrow hits the target.
Answers
Answer:
I think it's An inelastic collision occurs when an arrow hits the target because when the arrow hits it, the target and the arrow do not bounce away from each other.
Explanation:
What is the wavelength of a wave with a frequency of 466 Hz and a speed of
343 m/s?
A. 1.35 m
B. 0.74 m
C. 1.6 x 105 m
D. 6.25 x 10-6 m
Answers
Answer:
The answer is option BExplanation:
The wavelength of a wave can be found by using the formula
[tex] \lambda = \frac{c}{f} \\ [/tex]
where
c is the speed of the wave
f is the frequency
From the question
c = 343 m/s
f = 466 Hz
We have
[tex] \lambda = \frac{343}{466} \\ = 0.73605150...[/tex]
We have the final answer as
0.74 mHope this helps you
Answer: B: 0.74 m
Explanation:
Hope this helps / I did this question.
A truck traveling at a velocity of 33m/s comes to a halt by decelerating at 11m/s^2. How far does the truck travel in the process of stopping. identify known variables such as V, V0, a, t, and delta x.
Answers
Answer:
The truck was moving 16.5 m/s during the time it took to stop, which was 3 seconds.
Initial velocity = 33 m/sFinal velocity = 0 m/sAverage velocity = (33 + 0) / 2 m/s = 16.5 m/sExplanation:
First, how long does it take the truck to come to a complete stop?( 33 m/s ) / ( 11 m / s^2 ) = 3 secondsThen we can look at the average velocity between when the truck started decelerating and when it came to a complete stop. Because the deceleration is constant (always 11m/s^2) we can use this trick.The time taken to stop the truck is 3 seconds. The final velocity is zero. Then, the distance travelled by the truck is 49.5 m.
What is acceleration ?Acceleration is a physical quantity that, measures the rate of change in velocity. It is a vector quantity thus having both magnitude and direction. It can be defines as the ratio of change in velocity to the change in time.
Given initial velocity = 13.5 m/s
final velocity is zero since the bicycle is stopping.
then Δt = Δv/a
Δt = 33 m/s/ 11 m/s² = 3 seconds.
Hence, the truck will take 3 s to complete stop.
The distance covered within this time can be determined using the equation as follows:
s = u t + 1/2 at²
where u is the initial velocity
The acceleration a = - 11 m/s² the minus sign is due to deceleration.
s = (33m/s × 3 s) + (-11 m/s² ×3 s ×3 s) = 49.5 m.
Therefore, the truck will travel up to 49.5 m before stopping.
Find more on acceleration:
http://brainly.com/question/2303856
#SPJ2
Determine the initial velocity of a marble that lands 1.8m away from a tabletop that is 0.8m from the ground.
Acceleration due to gravity = 9.85
0 2.25 m/s
2.6 m/s
0 1.8 m/s
4.5 m/s
Answers
Answer:
4.5 m/s
Explanation:
[tex]s_x[/tex] = Horizontal displacement = 1.8 m
[tex]s_y[/tex] = Vertical displacement = 0.8 m
[tex]u_x[/tex] = Horizontal velocity
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
t = Time taken to fall down
[tex]s_y=u_yt+\dfrac{1}{2}gt^2\\\Rightarrow 0.8=0+\dfrac{1}{2}\times 9.8\times t^2\\\Rightarrow t=\sqrt{\dfrac{2\times 0.8}{9.8}}\\\Rightarrow t=0.4\ \text{s}[/tex]
[tex]s_x=u_xt+\dfrac{1}{2}a_xt^2\\\Rightarrow 1.8=u_x\times 0.4+0\\\Rightarrow u_x=\dfrac{1.8}{0.4}\\\Rightarrow u_x=4.5\ \text{m/s}[/tex]
The initial velocity of the marble is 4.5 m/s.
A swimmer sets off headed west at 0.40 m/s directly towards the opposite shore of a swift river. The swimmer makes it to the opposite shore 30 meters downstream of their expected position. If the river is 7.5 meters wide, what is the velocity of the water relative to the shore?
Answers
Answer:
Explanation:
River is 7.5 m wide . Time taken by it cover this displacement
= displacement / velocity
= 7.5 / 0.4
= 18.75 s
During this period , swimmer will have a displacement of 30 m due to velocity of river water .
Displacement of 30 m downstream will be due to flow of river .
velocity of water flow = displacement / time
= 30 / 18.75
= 1.6 m /s
Does anybody know anything about speed and velocity? im hella stuck.
Answers
Answer:
lm.ao i was stuck too when i was on that
Explanation:
what u need to know sis?
speed, being a scalar quantity, is the rate at which an object covers distance. The average speed is the distance (a scalar quantity) per time ratio. Speed is ignorant of direction. On the other hand, velocity is a vector quantity; it is direction-aware. Velocity is the rate at which the position changes.
A car is driving at 35 m/s. It decides to accelerate at 4.5 m/s2 for 3 seconds. How fast is it now moving?
Please show work even if you are an online student. I know it takes time, but I promise it is worth it.
I have included the units in the answer already. Please only put the number round all answers to 2 decimal places
if possible.
final velocity =
m/s
Blank 1
Next Page
6
? ? ?
Answers
Answer:
48.5
Explanation:
vf = vi + at
vf = 35 + 4.5(3)
vf = 35 + 13.5
vf = 48.5 m/s
A doctor takes an x-ray of your body this is an example of conduction, convection, radiation?
Answers
Answer:
RadiationExplanation:
An x-ray emits radiation to see through the outer part of your body.
Hope this helps! <3
An X-ray is a type of radiation which is a type of electromagnetic radiation in the electromagnetic spectrum.
What is electromagnetic spectrum?
The electromagnetic spectrum consists of electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.There are 7 types of electromagnetic radiation in the electromagnetic spectrum.Gamma rays have the highest energy while radio waves have least energy.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ2
33. A zebra is at rest 60 m away from a charging lion
running at 20 m/s. If the zebra accelerates at 4
m/s2, will the lion catch it?
Answers
Answer:
the lion will miss the zebra by 3 meters
Explanation
The zebra has gone 23.75m after 5 seconds
and the lion can only go 20 m/s
The lion can not catch zebra.
A diagram is attached below which describe situation of question.
The speed of Zebra is,
[tex]v=u+at=0+4t=4t[/tex]
Where u is initial speed of zebra.
The speed of lion is 20m/s.
The lead in speed by lion for every second is [tex](20-4t)[/tex].
[tex](20-4t)*t=60\\\\20t-4t^{2}=60\\ \\t^{2}-5t+15=0\\ \\t=\frac{5\pm\sqrt{(-35)} }{2}[/tex]
Here time is imaginary.
Therefore, The lion can not catch zebra.
Learn more:
https://brainly.com/question/24430414
Which of these is formed by a hot spot in Earth's crust?
Answers
Answer:
we need to know what the choices are?
Explanation:
Answer:
A hot spot is a region deep within the Earth's mantle from which heat rises through the process of convection. This heat facilitates the melting of rock. The melted rock, known as magma, often pushes through cracks in the crust to form volcanoes.