Ans. 4 m/s2
we know that,
acceleration = change in velocity/ total time
putting values we get,
16-2/3.5
= 14/3.5
=4
thus, the car's acceleration = 4 m/s2
you see a burglar run by you. the police come by a few seconds later and ask you for help. the most useful quantity you could give them is the burglar'smultiple choice question.velocity.acceleration.time.speed.
The most useful quantity you could give the police in this situation is the burglar's: Velocity.
Explanation:
1. Velocity: It provides both the speed and direction of the burglar, which would be helpful for the police to track and catch them.
2. Acceleration: It refers to the rate of change in velocity, but it wouldn't be as helpful without knowing the initial velocity and direction.
3. Time: It's not particularly helpful in this situation, as it does not give any information about the burglar's movement.
4. Speed: While it gives the rate of movement, it lacks the direction, which is crucial for the police to know where the burglar is headed.
To Learn More About Velocity
https://brainly.com/question/80295?source=archive
SPJ11
Martha is decorating a tree in her backyard with plastic eggs in preparation for easter. she
hangs two eggs side by side so that their centers are 0.40 m apart. martha rubs the eggs
to shine them up and in doing so, places a charge on each egg. the egg on the left
acquires a charge of 6.0 x 106 c while the egg on the right is charged with 4.0 x 10°c.
what is the electric field at a point 0.15 m to the right of the egg on the left?
The electric field at a point 0.15 m to the right of the egg on the left is: 1.35 x 10⁷ N/C.
To find the electric field at a point 0.15 m to the right of the egg on the left, we can use Coulomb's law. Coulomb's law states that the electric force between two charged objects is proportional to the product of their charges and inversely proportional to the square of the distance between them. The formula for Coulomb's law is:
F = k * (q1 * q2) / r²
Where F is the electric force, k is Coulomb's constant (9.0 x 10⁹ Nm²/C²), q1 and q2 are the charges of the two objects, and r is the distance between them.
In this case, we want to find the electric field at a point 0.15 m to the right of the egg on the left. To do this, we can first find the electric force between the two eggs, and then use that to find the electric field at the desired point.
The electric force between the two eggs can be found using Coulomb's law:
F = k * (q1 * q2) / r²
F = 9.0 x 10⁹ * (6.0 x 10⁻⁶) * (4.0 x 10^-6) / (0.4)²
F = 1.35 x 10⁻² N
Now that we have the electric force, we can find the electric field at the desired point using the formula:
E = F / q_test
Where E is the electric field and q_test is the test charge (assumed to be positive and very small). In this case, we can assume that the test charge is 1.0 x 10^-9 C.
E = F / q_test
E = 1.35 x 10⁻² / (1.0 x 10⁻⁹)
E = 1.35 x 10⁷ N/C
Therefore, the electric field at a point 0.15 m to the right of the egg on the left is 1.35 x 10⁷ N/C. This means that if we were to place a positive test charge of 1.0 x 10⁻⁹ C at that point, it would experience a force of 1.35 x 10⁻² N in the direction of the egg on the left.
To know more about electric field, refer here:
https://brainly.com/question/31216983#
#SPJ11
Why is sunlight considered a renewable resource? Which are disadvantages of renewable resources? Check all that apply. Renewable energy supplies may not be completely reliable. Renewable energy sources will never run out. Renewable energy produces large quantities of waste products. It is difficult to generate electricity in large quantities using renewable resources. Many renewable energy facilities have higher operating costs
Sunlight is considered a renewable resource because it is a source of energy that can be replenished over a relatively short period of time.
Sunlight is constantly being produced by the sun and will continue to be produced for billions of years.
The disadvantages of renewable resources are:
- Renewable energy supplies may not be completely reliable.
- Many renewable energy facilities have higher operating costs.
The other two options are not disadvantages of renewable resources. In fact, renewable energy sources will never run out, and they produce relatively smaller quantities of waste products compared to non-renewable sources.
While it is true that it can be difficult to generate electricity in large quantities using renewable resources, it is not a disadvantage in and of itself, but rather a challenge that can be addressed through further research and development.
To know more about Sunlight refer here
https://brainly.com/question/28782526#
#SPJ11
The electric field of a 460 mhz radio wave has a maximum rate of change of 4.5 × 1011 (v/m)/s. what is the wave's magnetic field amplitude?
The electric field of a 460 MHz radio wave with a maximum rate of change 4.5 × 1011 (v/m)/s. The wave's magnetic field amplitude is [tex]1.5 \times 10^{-3} T[/tex].
To determine the magnetic field amplitude of a 460 MHz radio wave with a maximum rate of change of the electric field, we can use the relationship between the electric and magnetic fields in electromagnetic waves.
The electric and magnetic fields are perpendicular to each other and travel at the speed of light. The magnetic field amplitude can be calculated using the formula:
B = E / c
Where B is the magnetic field amplitude, E is the maximum rate of change of the electric field, and c is the speed of light.
Substituting the given values, we get:
[tex]B = (4.5 \times 10^{11} V/m/s) / (3 \times 10^8 m/s)[/tex]
[tex]B = 1.5 \times 10^{-3} T[/tex]
Therefore, the magnetic field amplitude of the radio wave is [tex]1.5 \times 10^{-3} T.[/tex]
In summary, the magnetic field amplitude of a 460 MHz radio wave with a maximum rate of change of the electric field can be calculated using the relationship between the electric and magnetic fields in electromagnetic waves.
To know more about electric field refer here:
https://brainly.com/question/27897603?#
#SPJ11
What is wind ? What type of energy is possessed by wind ? (b) Explain how, wind energy can be used to generate electricity. Illustrate your answer with the help of a labelled diagram. (c) State two advantages of using wind energy for generating electricity. (d) Mention two limitations of wind energy for generating electricity
a) Wind is the movement of air in the Earth's atmosphere. It occurs due to the uneven heating of the Earth's surface by the sun, resulting in the displacement of air from areas of high pressure to areas of low pressure. Wind can occur at various speeds and directions, and it plays a crucial role in weather patterns and climate.
b) Wind energy is a form of kinetic energy that is possessed by the movement of air molecules. This energy can be harnessed to generate electricity through the use of wind turbines.
The process of generating electricity from wind energy involves the following steps:
1. Wind turbines are installed in areas where there is a consistent and strong wind flow. These turbines consist of large blades that are connected to a rotor.
2. When wind flows over the blades, it causes the rotor to spin. The rotation of the rotor generates mechanical energy.
3. This mechanical energy is then converted into electrical energy through the use of a generator.
4. The electrical energy is then transmitted to a power grid, where it can be distributed to homes and businesses.
c) There are several advantages of using wind energy for generating electricity, including:
1. Renewable: Wind energy is a renewable resource, which means it is replenished naturally and can be used indefinitely without depleting natural resources.
2. Clean: Wind energy does not produce harmful pollutants or greenhouse gas emissions, making it a clean and environmentally friendly source of energy.
d) There are also limitations to using wind energy for generating electricity, including:
1. Variability: Wind energy is not a consistent source of energy, as wind speeds can vary depending on weather patterns and time of day. This can make it difficult to rely on wind energy as a sole source of electricity.
2. Land use: Wind turbines require a significant amount of land, which can be problematic in areas with limited space or where wildlife habitats may be affected.
To know more about Wind energy refer here
https://brainly.com/question/29293441#
#SPJ11
Calculate the specific heat
of copper is 385 j/kg . °c.
find the change in thermal
energy for a copper pipe
with a mass of 8 kg when it
is heated from 12°c to 21°c.
show your work.
The change in thermal energy for the copper pipe is 27,720 J.
The formula to calculate the change in thermal energy is:
Q = mcΔT
where Q is the change in thermal energy, m is the mass of the object, c is the specific heat capacity of the material, and ΔT is the change in temperature.
Given:
c (specific heat of copper) = 385 J/kg.°C
m (mass of copper pipe) = 8 kg
ΔT (change in temperature) = 21°C - 12°C = 9°C
Substituting the values in the formula:
Q = mcΔT
Q = (8 kg)(385 J/kg.°C)(9°C)
Q = 27,720 J
To know more about thermal energy refer here
https://brainly.com/question/18989562#
#SPJ11
1. A car runs into a fence, and the fence dents the car.
2. Karen drops a marble on the ground, and it rolls across the floor in a straight line.
3. Matthew lets go of a recently blown up balloon, and it flies across the room as the air escapes.
4. Pushing your baby brother on the swing makes him go higher.
5. You place a pencil on your desk, and it stays there.
Which laws of motion are each one?
1. The law of conservation of momentum and the law of action-reaction. 2. The law of inertia. 3. The law of action-reaction. 4. The law of action-reaction. 5. The law of inertia.
1. A car runs into a fence, and the fence dents the car.
This demonstrates Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. As the car hits the fence, the fence exerts an equal force back on the car, causing the dent.
2. Karen drops a marble on the ground, and it rolls across the floor in a straight line.
This example illustrates Newton's First Law of Motion, also known as the Law of Inertia. It states that an object at rest stays at rest, and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. In this case, the marble keeps rolling in a straight line due to its inertia.
3. Matthew lets go of a recently blown up balloon, and it flies across the room as the air escapes.
This is an example of Newton's Third Law of Motion. As the air escapes from the balloon, it exerts a force in one direction. The balloon experiences an equal and opposite force, causing it to fly across the room.
4. Pushing your baby brother on the swing makes him go higher.
This situation demonstrates Newton's Second Law of Motion, which states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass (F = ma). When you push the swing, you are applying a force that causes it to accelerate, making it go higher.
5. You place a pencil on your desk, and it stays there.
This example represents Newton's First Law of Motion (the Law of Inertia) again. The pencil remains at rest on the desk because there is no unbalanced force acting upon it.
For more about conservation:
https://brainly.com/question/30333660
#SPJ11
A 100-coil spring has a spring constant of 470 n/m. it is cut into four shorter springs, each of which has 25 coils. one end of a 25-coil spring is attached to a wall. an object of mass 35 kg is attached to the other end of the spring, and the system is set into horizontal oscillation. what is the angular frequency of the motion?
The angular frequency of the motion is ω = √(7520 N/m ÷ 35 kg) = 10.75 rad/s.
The spring constant of each of the four shorter springs is four times that of the original spring since each spring has one-fourth of the original length.
Therefore, the spring constant of each shorter spring is 4 × 470 N/m = 1880 N/m. The angular frequency of the motion, ω, is given by the equation ω = √(k/m), where k is the spring constant and m is the mass of the object.
Since the four shorter springs are attached in parallel, their combined spring constant is 4 times that of each spring, or 4 × 1880 N/m = 7520 N/m.
Thus, the angular frequency of the motion is ω = √(7520 N/m ÷ 35 kg) = 10.75 rad/s.
To know more about angular frequency, refer here:
https://brainly.com/question/30885221#
#SPJ11
Draw a force diagram, find any resultant force and describe the object's motion.
a. An object with mass of 4kg, lying on a rough table, is acted upon by a horizontal
force of 25N. The object experiences a frictional force of 15N.
An object with a mass of 4kg, lying on a rough table, experiences a frictional force of 15N and a horizontal force of 25N, resulting in a net force of 10N, causing the object to accelerate to the right with an acceleration of 2.5 m/s².
Normal force Frictional force (15N)
The normal force points upwards and is equal in magnitude to the weight of the object (mg = 4kg * 9.81m/s² = 39.24N) since the object is not accelerating in the vertical direction.
The frictional force points to the left and is equal in magnitude to the force applied to the object (15N = 25N), indicating that the object is not moving horizontally.
The resultant force is found by subtracting the frictional force from the applied force:
F_net = F_applied - F_friction = 25N - 15N = 10N
The object will accelerate to the right with an acceleration of:
a = F_net/m = 10N/4kg = 2.5 m/s²
Therefore, the object will move to the right with increasing speed.
Learn more about Frictional force here:
https://brainly.com/question/4618599
#SPJ1
The microwave transmitters that we use have a frequency of about 10 ghz. What is the approximate wavelength?.
The wavelength of a microwave frequency is the inverse of its frequency; that is, the wavelength is equal to the speed of light (in a vacuum) divided by the frequency. In this case, the frequency is 10 GHz, meaning the wavelength is approximately 3 cm.
Wavelength is the distance from one peak of a wave to the next, and is inversely proportional to frequency; that is, as frequency increases, wavelength decreases. Microwaves, which have frequencies between 300 MHz and 30 GHz, have wavelengths of 1 m to 1 cm, respectively. This makes them ideal for applications that require short-range communication, such as microwave ovens, wireless communication, and radar.
Microwaves are also used in remote sensing, as they can penetrate some materials, such as clouds, allowing us to measure the properties of objects behind them.
Know more about wavelength here
https://brainly.com/question/12924624#
#SPJ11
A car of mass , initially at rest, begins to move with constant acceleration until it reaches, after a time interval , a speed 0. Then, it moves with uniform motion at speed 0 for another time interval. The total distance travelled by the car is a) 0 b) 3 2 0 c) 3 8 0 2 + 0 d) 2 /2 e) 0 2 4
The total distance travelled by the car is 0.
The correct answer is (a).
Let the acceleration of the car be a and the time interval during which it accelerates be t1. During this time, the car travels a distance d1 given by:
[tex]d1 = (1/2)at1^2[/tex]
When the car reaches a speed of 0, it continues to move with uniform motion for another time interval t2. The distance travelled during this time is given by:
d2 = 0t2 = 0
The total distance travelled by the car is therefore:
[tex]d = d1 + d2 = (1/2)at1^2[/tex]
We need to eliminate the unknown time t1 in order to express the total distance travelled in terms of the acceleration a. We can do this by using the fact that the final speed of the car is 0:
v = at1 = 0
Therefore, the time interval t1 is:
t1 = 0
Substituting this into the expression for d, we get:
[tex]d = (1/2)at1^2 = 0[/tex]
To know more about distance refer here
https://brainly.com/question/31713805#
#SPJ11
Calculate the theoretical value of the ratio m/r using adequate equation. What is the experimental value of the ration m/r based on your graph form? Calculate the percent discrepancy between the theoretical value and your experimental value on the ration m/r.Radius = 0.1m, Speed = 0.7422/0.1=5.504m/s2From graph of F vs. m:Slope±Δslope=5.426±0.01182N/kgTheoretical value: 5.504m/s2.
The percentage of discrepancy 31,657.14 ± 68.6%. This is the percent discrepancy between the theoretical value and the experimental value of the ratio m/r.
To calculate the theoretical value of the ratio m/r, we need to use the equation F = m×r×ω², where F is the centripetal force, m is the mass of the object, r is the radius of the circular path, and ω is the angular velocity.
Since we have the speed of the object, we can find the angular velocity using the equation ω = v/r, where v is the linear velocity. Therefore, ω = 5.504/0.1 = 55.04 rad/s.
Next, we can rearrange the equation F = m × r × ω² to solve for m/r, which gives us (F/ω²)/r = m/r. Plugging in the slope of the graph (5.426 N/kg) for F and the value of ω² (55.04²) for ω², and the given radius of 0.1m for r, we get:
m/r = (5.426 N/kg)/(55.04²)(0.1 m) = 0.000175 kg/m
This is the theoretical value of the ratio m/r.
To find the experimental value of the ratio m/r based on the graph, we need to find the slope of the line that best fits the data points on the graph. From the given information, we know that the slope is 5.426 ± 0.01182 N/kg. Therefore, the experimental value of the ratio m/r is:
m/r = (5.426 ± 0.01182 N/kg)/(9.81 m/s²)(0.1 m) = 0.0553 ± 0.00012 kg/m
To calculate the percent discrepancy between the theoretical value and the experimental value, we use the formula:
% discrepancy = |(experimental value - theoretical value)/theoretical value| × 100%
Plugging in the values we just found, we get:
% discrepancy = |(0.0553 ± 0.00012 - 0.000175)/0.000175| × 100% = 31,657.14 ± 68.6%
This is the percent discrepancy between the theoretical value and the experimental value of the ratio m/r.
Learn more about discrepancy here:-
https://brainly.com/question/13651668
#SPJ11
A sculptor is playing absent-mindedly with a large cylindrical lump of clay on a potter's wheel. This particular wheel has wonderful balance and will turn without friction when taken out of gear. The lump of clay is a uniform cylinder of mass 23. 0 kg and radius 19. 0 cm ; the axis of the clay cylinder coincides with the axis of the wheel, and the rotational inertia of the wheel can be neglected in comparison with the rotational inertia of the clay cylinder. The artist decides to throw ball bearings of mass 182. 0 grams at the curved side wall of the turning cylinder and to watch what happens when the bearings hit and stick. Before the first throw, the cylinder is turning once every 1. 70 seconds ; when looked at from above, the cylinder is turning counterclockwise, so that the direction of the angular momentum of the cylinder is Up. The artist throws the first ball bearing horizontally, and it impacts the clay wall at an angle of 60. 0 degrees away from the normal to the curved clay surface. Once the ball bearing is stuck in the clay, the cylinder is found to be turning once every 3. 30 seconds , still turning counterclockwise. Consider the ball bearing to be traveling horizontally before impact; the ball bearing is traveling in a plane which is perpendicular to the axis of the clay cylinder and which contains the center of mass of the clay. What was the speed of the bearing before the collision?
The speed of the ball bearing before the collision was: 1.75 m/s.
We can use the principle of conservation of angular momentum to solve this problem. Initially, the angular momentum of the system (clay cylinder + potter's wheel) is:
L1 = I1 * ω1
where I1 is the moment of inertia of the clay cylinder, and ω1 is its angular velocity.
When the ball bearing is thrown and sticks to the clay, the system's angular momentum changes due to the external torque exerted by the ball bearing. The change in angular momentum is:
ΔL = r * p * sin(θ)
where r is the radius of the cylinder, p is the linear momentum of the ball bearing before the collision, and θ is the angle between the normal to the clay surface and the direction of p. Since the ball bearing is thrown horizontally, θ = 60°.
Since the ball bearing sticks to the clay, the final system consists of a larger cylinder with a mass of 23.182 kg (23.0 kg clay cylinder + 0.182 kg ball bearing) and a new moment of inertia I2. The final angular velocity is ω2.
The conservation of angular momentum principle can be expressed as:
L1 + ΔL = I2 * ω2
Solving for the initial linear momentum p, we get:
p = (I2 * (ω2 - ω1)) / (r * sin(θ))
To find I2, we can use the formula for the moment of inertia of a solid cylinder:
I2 = (1/2) * M * R^2
where M is the mass of the larger cylinder and R is its radius. Since the clay cylinder and ball bearing stick together, their combined radius is still 19.0 cm.
Substituting the given values, we get:
I2 = (1/2) * (23.182 kg) * (0.19 m)^2 = 0.328 kg*m^2
To find ω2, we can use the fact that the final angular velocity is half the initial angular velocity:
ω2 = (1/2) * ω1 = (1/2) * (2π/1.70 s) = 2.33 rad/s
Finally, substituting all the values, we get:
p = (0.328 kgm^2 * (2.33 rad/s - 2π/1.70 s)) / (0.19 m * sin(60°)) = 0.319 kgm/s
The speed of the ball bearing before the collision is equal to its linear momentum divided by its mass:
v = p / 0.182 kg = 1.75 m/s
Therefore, the speed of the ball bearing before the collision was 1.75 m/s.
To know more about collision, refer here:
https://brainly.com/question/24616147#
#SPJ11
Which scientist is credited with the development of modern models of our solar system using the heliocentric model?.
The scientist credited with the development of modern models of our solar system using the heliocentric model is Nicolaus Copernicus. Copernicus was a Polish astronomer who lived from 1473 to 1543.
His groundbreaking work, "De revolutionibus orbium coelestium" (On the Revolutions of the Heavenly Spheres), was published in 1543 and laid the foundation for our understanding of the solar system today.
Before Copernicus, the prevailing belief was the geocentric model, which placed Earth at the center of the universe with all celestial bodies orbiting around it. This model, developed by the Greek astronomer Ptolemy, was accepted for over a thousand years.
Copernicus challenged this idea with his heliocentric model, which proposed that the Sun was at the center of the solar system and that the planets, including Earth, orbited around it in a circular motion.
His work built on the ideas of earlier astronomers, such as Aristarchus of Samos, who also proposed a heliocentric model but lacked sufficient evidence to support it.
Although initially met with skepticism, Copernicus' heliocentric model eventually gained acceptance thanks to the work of later astronomers like Galileo Galilei, Johannes Kepler, and Isaac Newton.
These scientists provided further evidence and refined the model to include elliptical orbits, leading to our current understanding of the solar system.
In summary, Nicolaus Copernicus is the scientist credited with the development of modern models of our solar system using the heliocentric model, which replaced the outdated geocentric model and revolutionized our understanding of the universe.
To know more about Nicolaus Copernicus refer here
https://brainly.com/question/16066049#
#SPJ11
two similar razor blades were placed on a wooden block and the other on an iron block. it was observed that the razor blade on the wooden block is attracted by the magnet while that on the iron block was not. explain
The soft iron is a magnetic material hence it became an induced magnet and attracted the blade.What is a magnetic substance?The term magnetic substances is a substance that can be attracted b a magnet. Now we know that the soft iron is amagnetic material hence it became an induced magnet and attracted the blade.Recall that a magnetic substance is a substance that can be attracted by a magnet. Wood can not be attracted by a magnet but soft iron cash attracted by a magnet hence it is a magnetic substance.This is not possible in the case of thewooden block since it is not magnetic as such the the razor blade on the wooden block was attracted to the magnet while the other on the soft iron was not.
How do human activities contribute to the EXTREME effects of Habagat and Amihan?
Human activities such as deforestation, urbanization, improper waste disposal, climate change, and inadequate infrastructure contribute to the extreme effects of Habagat and Amihan by: increasing the risk of flooding and landslides during monsoon seasons.
Both monsoons bring significant amounts of rainfall and can cause flooding and landslides in affected areas.
Firstly, deforestation reduces the ability of forests to absorb excess rainwater and maintain soil stability, increasing the risk of landslides and flash floods during heavy rainfall. Additionally, urbanization replaces permeable surfaces with impermeable ones, reducing the land's capacity to absorb water and increasing the likelihood of flooding in urban areas.
Secondly, improper waste disposal, particularly in rivers and other waterways, exacerbates flooding by obstructing the flow of water and reducing the efficiency of drainage systems. This can lead to more severe flooding during monsoon seasons.
Thirdly, climate change, partly driven by human activities like burning fossil fuels and industrial processes, is causing an increase in global temperatures. This results in more intense and unpredictable weather patterns, including extreme rainfall events during the Habagat and Amihan monsoons.
Lastly, inadequate infrastructure, such as poorly designed drainage systems and insufficient flood control measures, can make areas more vulnerable to the extreme effects of monsoons. Human activities that contribute to these inadequacies include insufficient planning, budget allocation, and implementation of effective measures to mitigate the impacts of extreme weather events.
To know more about monsoon, refer here:
https://brainly.com/question/30392370#
#SPJ11
Two ropes support a load of 478 kg. The two ropes are perpendicular to each other, and the tension in the first rope is 2. 2 times that of the second rope. Find the tension in the second rope. The acceleration of gravity is 9. 8 m/s 2. Answer in units of N
The tension in the second rope is approximately 809.44 N.
To solve this problem, we'll use the following terms: load, tension, perpendicular, ropes, and gravity.
Given that two ropes support a load of 478 kg, we can find the total force acting on the load due to gravity using F = m * g, where F is the force, m is the mass, and g is the acceleration due to gravity (9.8 m/s²).
F = 478 kg * 9.8 m/s² = 4684.4 N
Now, let T1 be the tension in the first rope, and T2 be the tension in the second rope. We're told that T1 = 2.2 * T2, and the ropes are perpendicular to each other.
Since the ropes are perpendicular, the sum of the horizontal and vertical components of the tensions must equal the total force:
T1^2 + T2^2 = F^2
Substitute T1 with 2.2 * T2:
(2.2 * T2)^2 + T2^2 = 4684.4^2
Now, solve for T2:
5.84 * T2^2 = 4684.4^2
T2^2 = (4684.4^2) / 5.84
T2 = sqrt((4684.4^2) / 5.84)
T2 ≈ 809.44 N
Therefore, the tension in the second rope is approximately 809.44 N.
To learn more about gravity, refer below:
https://brainly.com/question/31321801
#SPJ11
Which statements describe a closed circuit? select three options. bulbs will shine. bulbs will not shine. the circuit is incomplete. the circuit is complete. charges flow. charges do not flow.
The statements describe a closed circuit: bulbs will shine, the circuit is complete, the circuit is complete.
A closed circuit can be described by the following three statements:
1. Bulbs will shine: In a closed circuit, the electrical components such as bulbs are connected in a complete loop, which allows the current to flow through them, causing the bulbs to shine.
2. The circuit is complete: A closed circuit has a continuous path for the charges to flow through. This means there are no breaks or gaps in the connections, allowing the current to move without interruption.
3. Charges flow: Since a closed circuit is complete, it enables the flow of electrical charges (or current) through the circuit. This continuous flow of charges is what powers the devices connected to the circuit.
In summary, a closed circuit is characterized by bulbs shining, a complete circuit, and the flow of charges. This is in contrast to an open circuit, where the circuit is incomplete, and charges do not flow, resulting in bulbs not shining.
To know more about circuit, refer here:
https://brainly.com/question/29765546#
#SPJ11
Complete question:
Which statements describe a closed circuit? select three options.
bulbs will shine.
bulbs will not shine.
he circuit is incomplete.
the circuit is complete.
charges flow.
charges do not flow.
A block of weight 500n is pushed up a slope by a force of 250n.assume there is no friction .calculate a.ama b.vr c.the length of the slope if the height of the slope is 10m.
a. The mechanical advantage is 2.
b. The length of the slope (input distance) is 5 meters.
a. To calculate the mechanical advantage (MA) in this scenario, we can use the formula:
MA = F_out / F_in
where F_out is the output force (the weight of the block) and F_in is the input force (the force applied to push the block).
In this case, the weight of the block is 500 N (newtons) and the force applied to push the block is 250 N.
MA = 500 N / 250 N
MA = 2
Therefore, the mechanical advantage is 2.
b. To calculate the velocity ratio (VR), we can use the formula:
VR = d_out / d_in
where d_out is the output distance (the height the block is lifted) and d_in is the input distance (the length of the slope).
In this case, the height of the slope is given as 10 m.
VR = 10 m / d_in
To find the input distance (d_in), we need to rearrange the formula:
d_in = d_out / VR
Since the mechanical advantage (MA) is equal to the velocity ratio (VR) in an ideal scenario without friction, we can substitute the MA value of 2 into the formula:
d_in = 10 m / 2
d_in = 5 m
Therefore, the length of the slope (input distance) is 5 meters.
To know more about mechanical refer here
https://brainly.com/question/20434227#
#SPJ11
A computer simulation attached to controls that include a steering wheel,
brakes, and gas pedal can be used to help people who are learning to drive.
The controls sense the forces applied, and the computer simulation shows
how a car would respond. What is one benefit of this model?
о
A. It can show how to the driver will react when passengers are in the
car.
B. It can be used to teach drivers how to operate other types of
vehicles, such as boats.
O
C. It can show what happens when the driver turns a corner.
D. It does not show traffic signs for drivers.
One benefit of using a computer simulation attached to controls such as a steering wheel, brakes, and gas pedal for learning to drive is C: It can show what happens when the driver turns a corner.
This model allows novice drivers to practice and understand the dynamics of turning corners in a safe, controlled environment. By sensing the forces applied to the controls, the simulation can accurately replicate how a real car would respond, enabling learners to develop proper steering, braking, and acceleration techniques.
Additionally, the simulation can be customized to present various road conditions and scenarios, helping drivers gain experience and confidence before hitting the road. While this model does not directly address options A, B, and D, it focuses on enhancing a driver's overall understanding and ability to maneuver a vehicle safely and effectively. The correct option is C: It can show what happens when the driver turns a corner.
For more about computer simulation:
https://brainly.com/question/29999024
#SPJ11
Explain why knowing a combination of grappling and striking martial arts is advantageous during a street self defense scenario. Explain how both are beneficial
Knowing a combination of grappling and striking martial arts is advantageous during a street self-defense scenario because it provides a well-rounded skill set to address various types of threats.
Grappling techniques, such as those found in Brazilian Jiu-Jitsu or Judo, focus on controlling, submitting, or immobilizing an opponent, which can be especially helpful in close-quarters situations.
Striking martial arts, such as Muay Thai or Boxing, emphasize powerful punches, kicks, and knee strikes to deter or incapacitate an attacker from a distance.
By mastering both grappling and striking disciplines, one can adapt to different situations, maintain control, and maximize their chances of successfully defending themselves in a street scenario.
To learn more about martial, refer below:
https://brainly.com/question/30390696
#SPJ11
An inflated car tyre is considered to have a constant volume, regardless of any changes in temperature
or pressure. Use the kinetic theory of gases to answer following.
a) How does the air in the tyre exert pressure on the walls of the tyre?
b) Why is the pressure the same at all points on the inside wall of a tyre?
c) What happens to the pressure on the inside walls of the tyre if the temperature of the air increases? Explain your answer.
d) More air is pumped into the tyre whilst the temperature is kept constant until there are twice as many molecules as before. Explain why you would expect the pressure to be doubled
a) The air in the tire consists of gas molecules that constantly move and collide with the walls of the tire. b) This leads to a uniform distribution of collisions and forces on the tire walls, ensuring constant pressure.
According to the kinetic theory of gases, gases are made up of tiny particles that are in constant random motion.
a) The air in the tire consists of gas molecules that constantly move and collide with the walls of the tire. These collisions exert a force on the tire walls, which over a given area, results in pressure.
b) The pressure is the same at all points on the inside wall of the tire because the gas molecules are evenly distributed and move in random directions. This leads to a uniform distribution of collisions and forces on the tire walls, ensuring constant pressure.
c) When the temperature of the air increases, the kinetic energy of the gas molecules also increases. This results in more forceful collisions with the tire walls, leading to an increase in pressure.
d) When the number of air molecules is doubled at a constant temperature, there will be twice as many collisions with the tire walls. This leads to a proportional increase in the force exerted, resulting in the pressure being doubled as well.
For more about gas molecules:
https://brainly.com/question/30597086
#SPJ11
A small rubber wheel is used to drive a large pottery wheel. The two wheels are mounted so that their circular edges touch. The small wheel has a radius of 2. 8 cm and accelerates at the rate of 6. 0 rad/s2, and it is in contact with the pottery wheel (radius 23. 0 cm ) without slipping. Calculate (a) the angular acceleration of the pottery wheel, and (b) the time it takes the pottery wheel to reach its required speed of 65 rpm
The angular acceleration of the pottery wheel is 0.728 rad/s², and whereas the time it takes for the pottery wheel to reach its required speed of 65 rpm is 1.93 s.
(a) The small rubber wheel drives the large pottery wheel through frictional forces at their point of contact. Since they are in contact without slipping, the linear speed of the small wheel must be equal to the linear speed of the large wheel.
The linear speed of the small wheel can be found using the formula [tex]v = \omega r,[/tex] where ω is the angular velocity and r is the radius. The small wheel has an angular acceleration of 6.0 rad/s², so its angular velocity increases as [tex]\omega = \alpha t[/tex] , where t is time.
Substituting the given values, we get v = (6.0 rad/s²)(2.8 cm) t. The linear speed of the large wheel is the same as that of the small wheel, so we can use the formula [tex]v = \omega r[/tex] to find its angular velocity. Substituting the given values, we get [tex]\omega = v/r[/tex]
[tex]= (6.0\;rad/s^2)(2.8\;cm)/(23.0\cm)[/tex]
= 0.728 rad/s².
(b) The time it takes for the pottery wheel to reach its required speed of 65 rpm can be found using the formula [tex]\omega = (2\pi n)/60[/tex], where n is the rotational speed in rpm.
Solving for n, we get [tex]n = (60 \;\omega)/(2\pi )[/tex]
= (60)(0.728)/(2π)
= 11.6 rpm.
The time it takes to reach this speed can be found using the formula [tex]t = (n - n0)/\alpha[/tex], where n0 is the initial rotational speed (which is zero in this case).
Substituting the given values, we get t = (11.6 rpm - 0 rpm)/(6.0 rad/s²) = 1.93 s.
In summary, A small rubber wheel drives a large pottery wheel through frictional forces. The angular acceleration of the pottery wheel can be found using the formula [tex]\omega = v/r[/tex] where v is the linear speed of the small wheel and r is the radius of the pottery wheel.
The time it takes for the pottery wheel to reach its required speed can be found using the formula t = (n - n0)/α, where n is the final rotational speed and α is the angular acceleration.
To know more about acceleration refer here:
https://brainly.com/question/30413854#
#SPJ11
A truck weighs 25,000 n, and its tires are inflated to a pressure of 200 kpa. what is the total area of the truck’s tires in contact with the road?
The total area of the truck's tires in contact with the road is 0.125 square meters.
To find the total area of the truck's tires in contact with the road, we can use the formula for pressure, which is pressure equals force divided by area. Rearranging this formula to solve for area, we get area equals force divided by pressure.
Using this formula, we can calculate the area of the truck's tires by dividing the weight of the truck by the pressure of the tires:
Area = 25,000 N / 200 kPa
Before we can calculate the area, we need to make sure that our units are consistent. We can convert kilopascals to pascals by multiplying by 1,000, so we get:
Area = 25,000 N / (200,000 Pa)
Simplifying this expression, we get:
Area = 0.125 [tex]m^{2}[/tex]
Therefore, the total area of the truck's tires in contact with the road is 0.125 square meters.
To know more about kilopascals, refer here:
https://brainly.com/question/30626869#
#SPJ11
Four students are each given an identical resistor and asked to find its resistance. They each measure the potential difference across the resistor and the current in it. One student makes a mistake. Which row shows the results of the student that makes a mistake
Student B measured a potential difference and current and calculated a resistance of 2.18 ohms using Ohm's Law. The other three students also calculated the same resistance value, suggesting they made accurate measurements.
The row that shows the results of the student who made a mistake is B for potential difference and B for current. This is because the resistance calculated using Ohm's Law (resistance = potential difference/current) for these values is not the same as the resistance calculated by the other three students.
To find the resistance of a resistor, the potential difference (in volts) and current (in amperes) are measured. Using Ohm's Law, the resistance can be calculated by dividing the potential difference by the current. If one student makes a mistake in measuring either the potential difference or the current, their calculated resistance value will be incorrect.
In this case, student B measured a potential difference of 2.4 V and a current of 1.1 A. The resistance calculated using Ohm's Law is 2.18 ohms. The other three students all measured different potential differences and currents, but their calculated resistance values are all the same, indicating that they likely made accurate measurements.
In summary, if one student makes a mistake in measuring the potential difference or current of an identical resistor, their calculated resistance value will differ from the values calculated by the other students. This demonstrates the importance of careful and accurate measurements in scientific experiments.
To know more about Ohm's Law refer here:
https://brainly.com/question/30452191#
#SPJ11
Complete Question:
Four students are each given an identical resistor and asked to find its resistance. They each measure the potential difference across the resistor and the current in it. One student makes a mistake. Which row shows the results of the student that makes a mistake?
potential difference/V
A. 1.2
B. 2.4
C. 1.5
D. 3.0
current/A
A. 0.500
B. 1.100
C. 0.625
D. 1.250
a circuit is constructed with the battery, the switch, the inductor, and the three identical resistors shown. after the switch is closed, what is the initial rate of change of current in the circuit?
The initial rate of change of current in the circuit is zero.
When the switch is first closed, the circuit is effectively two separate circuits - one with the battery, switch, and inductor, and another with the three resistors. Initially, the inductor acts as a short circuit, so no current flows through the resistors. As the current through the inductor increases, it generates a magnetic field that opposes the change in current. This means that the rate of change of current is initially zero.
The inductor's opposition to changes in current is due to Faraday's law of electromagnetic induction, which states that a changing magnetic field induces an electromotive force (EMF) in a circuit. In this case, the changing magnetic field is due to the changing current in the inductor, and the induced EMF opposes the change in current.
As the magnetic field builds up, its opposition to changes in current decreases, and the rate of change of current in the circuit increases. Eventually, the inductor acts as a current limiter, and the current through the circuit reaches a steady state value.
To know more about the Resistor, here
https://brainly.com/question/29438184
#SPJ4
A vertical spring scale can measure weights up to 215 n . the scale extends by an amount of 10.5 cm from its equilibrium position at 0 n to the 215 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.50 hz .
A fish weighing 0.045 kg is measured using a frequency of 2.50 Hz. Its weight is calculated to be 215 N using the spring constant and displacement of the scale.
Assuming the oscillations of the fish on the spring are simple harmonic, we can use the formula for the period of a simple harmonic oscillator to find the frequency of oscillation:
[tex]T = 1/f = 2\pi \sqrt{(m/k)}[/tex]
where T is the period, f is the frequency, m is the mass of the object, and k is the spring constant.
To find k, we can use Hooke's law, which states that the force exerted by a spring is proportional to the amount of stretch or compression:
F = -kx
where F is the force, k is the spring constant, and x is the displacement from the equilibrium position.
Using the information given in the problem, we can calculate the spring constant:
k = F/x
k = (215 N) / (0.105 m)
k = 2047.6 N/m
Then, we can use the formula for the period of oscillation to find the frequency:
[tex]T = 2\pi \sqrt{(m/k)}[/tex]
[tex]2\pi \sqrt{(m/k)} = 1/f[/tex]
[tex]f = 1 / [2\pi \sqrt{(m/k)}][/tex]
[tex]f = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
f = 2.5 Hz (as given in the problem)
Therefore, we can use the frequency of 2.50 Hz to calculate the mass of the fish:
[tex]2.50 = 1 / [2\pi \sqrt{(m/2047.6)}][/tex]
m = 0.045 kg
Finally, we can use the spring constant and the displacement of the scale to find the weight of the fish:
F = kx = (2047.6 N/m)(0.105 m) = 215 N
Therefore, the weight of the fish is 215 N.
To know more about frequency refer here:
https://brainly.com/question/29739263#
#SPJ11
What definition describes cognitive behavior therapy?
A.
passive concentration on various bodily sensations
B.
thought correction to reduce stress
C.
progressive muscle relaxation, working progressively downwards
D.
inhaling through the nostrils and exhaling through the mouth
The definition describes cognitive behavior therapy (B).thought correction to reduce stress is correct option.
The goal of cognitive behaviour therapy (CBT), a type of psychotherapy that aims to promote overall mental health and reduce stress, is to rectify one's thoughts. It aids people in recognizing and altering unfavorable thought and behaviour patterns that contribute to their emotional and psychological discomfort. The foundation of cognitive behavioral therapy (CBT) is the notion that our ideas, feelings, and behaviours are interrelated, and that altering one of these elements can result in favorable changes in the others.
Therefore, the correct option is (B).
To know more about cognitive
https://brainly.com/question/30623269
#SPJ1
1. Which property distinguishes all electromagnetic waves from mechanical waves, such as sound waves and water waves?
A. The ability to travel in a vacuum
B. Very short wavelength
C. Oscillations that are perpendicular to the direction of motion
D. Oscillations that are parallel to the direction of motion
PLEASE HELP
The property that distinguishes all electromagnetic waves from mechanical waves, such as sound waves and water waves, is A. The ability to travel in a vacuum.
Electromagnetic waves, such as light, radio waves, and microwaves, are composed of oscillating electric and magnetic fields that are perpendicular to each other and to the direction of wave propagation. Unlike mechanical waves, which require a medium to transmit energy (like air for sound waves or water for water waves), electromagnetic waves can propagate without a medium. This means they can travel through the vacuum of space, allowing us to receive light from the sun and observe distant stars and galaxies.
In contrast, mechanical waves require a material medium to transfer energy. Sound waves, for example, are created by the vibration of particles in the air, water, or another medium. These vibrations cause a chain reaction of particle movement, carrying the wave's energy from one location to another. If there were no medium to carry the wave, it could not propagate. This is why sound cannot travel in a vacuum, while electromagnetic waves can.
In summary, the ability to travel in a vacuum distinguishes electromagnetic waves from mechanical waves like sound and water waves. The correct option is A. The ability to travel in a vacuum.
For more about electromagnetic waves:
https://brainly.com/question/29774932
#SPJ11
A diver makes 1.0 revolutions on the way from a 9.5-m-high platform to the water. assuming zero initial vertical velocity, find the diver's average angular velocity during a dive.
The average angular velocity (ω) of the diver during the dive can be found using the formula:
1. ω = Δθ / Δt
where Δθ is the change in angle (in radians) and Δt is the time interval over which the change occurred.
In this case, the diver makes one complete revolution (i.e., a change in angle of 2π radians) during the dive, and we are not given the time interval directly.
However, we can use other information to find the time it takes for the diver to complete one revolution.
The diver falls from a height of 9.5 m, which means that the time it takes for the diver to hit the water can be found using the formula:
Δy = [tex]1/2 gt^2[/tex]
where Δy is the displacement (9.5 m), g is the acceleration due to gravity and t is the time interval. Solving for t, we get:
t = √(2Δy/g)
t = √(2 x 9.5 m / 9.8 m/s^2)
t = 1.43 seconds
Therefore, the time it takes for the diver to complete one revolution is twice this time (since the diver completes one revolution on the way down and another on the way up), or:
Δt = 2t = 2 x 1.43 s
Δt = 2.86 seconds
2. we can use this value to find the average angular velocity of the diver:
ω = Δθ / Δt
ω = 2π rad / 2.86 s
ω = 2.19 rad/s (rounded to two decimal places)
Therefore, the diver's average angular velocity during the dive was 2.19 rad/s.
To know more about angular velocity refer here
https://brainly.com/question/29557272#
#SPJ11