a chemist determines by measurements that moles of iodine solid participate in a chemical reaction. calculate the mass of iodine solid that participates. round your answer to significant digits

The ratio of the mass in grams and volume in cubic meters gives the density. The density of 0.80 gm helium is 1.78 × 10 ⁻⁴ g/cm³.

Helium (He) is an inert gas and a chemical element belonging to Periodic Table Group 18 (noble gases). Helium, the second-lightest element (only hydrogen is lighter), is an odourless, tasteless gas that melts at a temperature of 268.9 °C (452 °F).

Helium has lower freezing and boiling points than any other known substance. The only element that cannot solidify by adequate cooling at standard atmospheric pressure is helium; in order to solidify it, pressure of 25 atmospheres at a temperature of 1 K (or 272 °C or 458 °F) must be applied. density (0 °C, 1 atm): 0.1785 grammes per litre

To learn more about helium please visit-
https://brainly.com/question/4945478
#SPJ9

On the basis of the law of conservation of matter, the missing coefficient for water is 6 in the process of cellular respiration. Thus, the correct option is 1.

It is possible to define cellular respiration as a chemical process that results in the breakdown of food inside the cell and the release of ATP, which is a type of energy.

It entails the chain of chemical processes through which organic materials are oxidized to provide energy to living things.

The left side of the equation has 6 molecules. The equation must be balanced so it must be 6 for the coefficient of water.

C₆H₁₂O₆

Thus, the correct option is 1. six, 6.

To learn more about cellular respiration, refer to the link:

https://brainly.com/question/13721588

#SPJ4

The question is incomplete. Your most probably complete question is given below:

1. 6

2. 8

3. 4

4. 2

The empirical formula of iron oxide is Fe2O3 and its name is ferric oxide.

Given:

Solution:

Now, calculate the relative mass of iron in iron oxide = Percentage of iron by mass / At. mass of iron

Relative mass of iron = 70/55.85 = 1.25

Relative mass of oxygen = Percentage of oxygen by mass / At. mass of iron = 30/55.85 = 1.88

Now the calculate the molar ratio of iron to oxygen = 1.25 : 1.88 = 2:3

Thus, the empirical formula of iron oxide is Fe2O3 and its name is ferric oxide.

If you need to learn more about empirical formula click here:

https://brainly.com/question/13058832

#SPJ4

The average atomic mass of lead given its three isotopes is 207.52.

Average atomic mass is the weighted average of the atomic masses of the naturally occurring isotopes of an element.

According to this question, the following isotopes with their percent abundance and atomic masses of lead are given:

The average atomic mass is as follows: 29.865 + 35.186 + 142.466 = 207.52

Therefore, the average atomic mass of lead given its three isotopes is 207.52.

Learn more about average atomic mass at: https://brainly.com/question/13753702

#SPJ1

Answer:

D) HCl + KOH --> KCl + H2O is the answer

The mass of rubidium chloride that participates is 731.57 g

Complete Question

The chemical formula for rubidium chloride is RbCI. A chemist determined by measurements that moles of rubidium chloride participate in a chemical reaction are 6.05 mol. Calculate the mass of rubidium chloride that participates. Be sure your answer has the correct number of significant digits.

The mass of rubidium chloride that participates is 731.57 g

It is known that number of moles is equal to mass divided by molar mass of the substance.

No. of moles = given mass/molar mass

It is known that molar mass of RbCl is 120.921 g/mol.

Hence, calculate the mass of RbCl for 6.05 mol as follows.

No. of moles = given mass / molar mass

6.05 mol = mass/120.921g/mol

mass = 731.57 g

Therefore, we can conclude that mass of rubidium chloride that participates is 731.57 g.

Learn more about Mass here:

https://brainly.com/question/26150306

#SPJ4

polar attractions are ... polar attractions are  (a), (b), and (c) are correct.

Between atoms with partial charges, polar attractions take place that are weaker than covalent bonds. Nevertheless, they are significant because so many of them take place in live cells.

Between atoms with partial charges, polar attractions take place that are weaker than covalent bonds. Nevertheless, they are significant because so many of them take place in live cells. can happen inside a water molecule and can develop between H and N.

We refer to something as polar when it has two distinct ends. When a molecule has both positive and negative ends, we refer to it as being polar. We refer to someone as non-polar if they don't. Polar objects can pull or pull away from one another (opposite charges attract, alike charges repel).

To know more about atoms visit :

https://brainly.com/question/1566330

#SPJ4

A glassware that allows a solution to be precisely and slowly added to another solution is a Burette.

Burette, a laboratory apparatus used in quantitative chemical analysis to measure the volume of a liquid or a gas. It consists of a graduated glass tube with a stopcock (turning plug, or spigot) at one end. The tube of the burette is filled with a fluid, such as water, oil, or mercury.

Burette is also used in Titration. It is a process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them.

To know more about Burette and Titration :

brainly.com/question/18456017

#SPJ4

The molecular formula of the compound having an empirical formula BH₃ and a molar mass of 27.6 g/mol is B₂H₆.

Empirical formula is the whole number ratio of the atoms which are present in the compound.

Molecular formula is the number of atoms of each element present in one molecule of compound.

Given -

Empirical formula = BH₃

Molar mass = 27.6 g/mol

We must find the empirical mass of the compound,

Molar mass of B = 10.8 amu

Molar mass of H = 1.00  amu

Therefore,

Empirical mass = 10.8 amu + (3 x 1.00) amu = 13.8 amu

To find molecular formula, we divide the molecular mass by the empirical mass. So,

Molecular formula = Molecular mass

                                  Empirical mass

Molecular formula = 27.6

                                  13.8

Molecular formula = 2

Hence, the molecular formula of the compound is BH₃ = B₁ₓ₂H₃ₓ₂ = B₂H₆

To learn more about empirical formula,

brainly.com/question/14518158

#SPJ1

The option (d) will be correct, that is the answer would be 0.39 mol.

Ideal gas equation is also known by the  name of the general gas equation.

It is already mentioned in the problem,

Volume , V = 5.86 L

Temperature , T = 273 K

Pressure, P = 1.5 atm

Ideal Gas Equation : PV = nRT

n = PV / RT

= 1.5  atm * 5.86 L / 0.0821 L atm mol^-1 K^-1 * 273 K

=  8.79 / 22.41 mol

=0.39 mol

Hence the number of moles of H2 found in the gas sample is 0.39 mol.

To know more about Ideal Gas Equation here :

https://brainly.com/question/4147359?referrer=searchResults

#SPJ1

Mass is an extensive property of a matter which describes the number of particles in a matter. According to the law of conservation of mass "mass can neither be created nor be destroyed." Hence mass is a quantity which never changes whether a particle is in a solid, liquid or gaseous state.

Answer:

A chemical change results in a new substance being formed whereas a physical change will result in a different state of matter

1,63760 money she make from the gold and volume of gold take 5.295 volume is the amount of space occupied by a substance

Here given data is kristen was arrested for stealing 6.532 tons and then She escaped capture for 2.45 days and then she had already hid some of the gold, but had 2.34 tons of gold still with her

We have to find how much money did she have if 2.34 tons of gold still with her = ? and how volume does gold take up = ?

Volume is the amount of 3D space a substance or object occupies

We have to convert 2.34 tons into money

Then  2.34 tons =  1,63760 money

And the formula to find volume is:

volume = mass/density

Mass of gold = 196.96 and density = 18.31

Volume = mass of gold / density

Volume = 196.96 / 18.31

Volume = 5.295

Know more about volume

https://brainly.com/question/13660337

#SPJ1

Answer:

Water is H2O which is a compound and would therefore not be on the periodic table. The periodic table only consists of elements.

Explanation:

The little number you see to the right of the symbol for an element is called a subscript. That number indicates the number of atoms of that element present in the compound.

All of the given procedures are used to reduce the amount of acid rain in the environment except using leaded gasoline in automobiles; option D.

Acid rain refers to the condition in which oxide gases of non-metals released from combustion of fossil fuels dissolve in rain water to form acids which is then called acid rain.

Acid rain is mainly formed when sulfur oxides and nitrogen oxides released  from combustion of fuels dissolve in rainwater.

Acid rain results in polluted water an also affects the organisms found in the environment.

Some  procedures used to reduce the amount of acid rain in the environment include:

Therefore, using leaded gasoline in automobiles will not reduce the amount of acid rain in the environment.

Learn more about acid rain at: https://brainly.com/question/14742453

#SPJ1

The accurate phrases abut the study design and validity are:

The role of light in the growth of plants is important as light is necessary for photosynthesis.

The growth regions of a plant are the shoots and the roots.

The shoots of plants show positive phototaxis by growing towards a unidirectional light source.

A unidirectional light source is light that comes from one direction.

The growth region of the shoot, that is the tips produces hormones which enable the tip of the plant to grow towards the light source.

Considering the given experiment , the accurate phrases abut the study design and validity are:

In conclusion, the experiment to demonstrate the bending of plants shoots towards a light source should include a control and must be repeated by other researchers,

Learn more control in experiments at: https://brainly.com/question/17016970

#SPJ1

Answer:

c

Explanation:

As we know science is all about fact so from many years scientist use to predict the future or events so answer is in my opinion c

The more the volume of the substance less dense will be the substance. The sample of liquid aluminum with a density of 2.7 g/cm³ has a volume of 1.62 cm³.

The volume has been the space that is in inverse relation to the density of the substance and gets increased with less dense substances while decreasing with more dense substances.

Given,

Mass of aluminum = 4.39 gm

Density of aluminium = 2.7 g/cm³

The volume of Al is calculated as:

Volume = Mass ÷ Density

V = 4.39 ÷ 2.7

= 1.62 cm³

Therefore, the volume of liquid aluminum is 1.62 cm³.

Learn more about volume, and density, here:

https://brainly.com/question/12006917

#SPJ4

The correct answer to the addition of the given number will be D. 5,610.3 based on the rules for addition with significant figures.

We have to find the addition of:

35.7 + 432.33 + 5,142.312 = 5,610.342

However, according to the rule for significant figures, if the addend with the fewest decimal places is 1, the final consequent will also have one decimal place. If the lowest addend is 2, the final consequent will have two decimal places, and so on.

Because significant numbers are established in the form of digits, they are also known as significant digits. The number of significant digits can be determined by counting all of the values beginning with the first non-zero digit on the left. These numbers are dependable and required to represent the quantity of a length, volume, mass, measurement, and so on.

Learn more about significant digits here:

brainly.com/question/1658998

#SPJ9

The temperature of the gas is 133.42 kelvin.

Assuming that the gas in the question is ideal, we can apply the ideal gas equation which is as follows:

PV = nRT

Here P is the pressure of the gas = 1.20 atm

V is the volume of the gas = 31.00 liters

N is the number of moles = 3.40 moles

R is the universal gas constant = 0.0821 L atm

T is the temperature of the gas =?

Putting the values in the above equation:

1.20 x 31.00 = 3.40 x 0.0821 x T

T = 1.20 x 31/3.40 x 0.0821

T = 133.42 K

Thus, the temperature of the gas is 133.42 kelvin.

To know more about "ideal gas equations", refer to the following link:

https://brainly.com/question/4147359?referrer=searchResults

#SPJ1

The cost of travelling from San Francisco to Los Angeles is $65

Now we know that it could be expensive to use an automobile because of the cost of gasoline. The cost of the use of gasoline depends on the distance that is travelled.

If 1 gallon is required for 24 miles

x gallons is required for 405 miles

x =  405 miles * 1 gallon/24 miles

x = 16.9 gallons

Now;

If 1 gallon costs $3.85

16.9 gallons costs  16.9 gallons * $3.85/1 gallon

= $65

Learn more about cost of gasoline:https://brainly.com/question/24270246

#SPJ1

The aluminum sulfate stock solution should the chemist pour out is 219.8 ml

Complete Question

A chemist must prepare 400 mL of 1.00M aqueous aluminum sulfate working solution. He'll do this by pouring out 1.82 mol/L aqueous aluminum sulfate stock solution into a graduated cylinder and diluting it with distilled water. How many mL of the aluminum sulfate stock solution should the chemist pour out?

The aluminum sulfate stock solution should the chemist pour out is 219.8 ml

Given:

V1 = 400ml, M1 = 1 M, V2 = ?, M2 = 1.82 M

Hence, the relation between molarity and volume is as follows.

M1V1 = M2V2

1.00M x 400ml = 1.82 x V2

V₂ = 219.8 ml

Thus, we can conclude that 219.8 ml of the aluminum sulfate stock solution should the chemist pour out.

Learn more about Volume here:

https://brainly.com/question/25736513

#SPJ4

Taking into account the definition of density, the density of the pen is 1.8523 g/mL.

Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space and it is a quantity that allows to measure the amount of mass in a certain volume of a substance.

The expression for the calculation of density is:

density= mass÷ volume

From this expression it can be deduced that density is inversely proportional to volume.

In this case, you know that:

Replacing in the definition of density:

density= mass of the pen÷ volume of the pen

density= 24.08 g÷ 13 mL

Solving:

density= 1.8523 g/mL

In summary, the density of the pen is 1.8523 g/mL.

Learn more about density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

The density of the gold colored metal beads if mass is 425 g and volume of 47.5mL is 8.9 g/mL.

Density is defined as the ratio of the Mass of the substance to the volume of the substance.

It's SI unit is kg/m3.

It is denoted by ρ or rho.

Density = mass/volume

From the given data, we noticed that,

Mass of gold colored metal beads = 425g

Volume of the gold colored metal beads = 47.5mL.

By substituting all the value, we get

= 425/47.5

= 8.9

Thus, we concluded that the density of the gold colored metal beads if mass is 425 g and volume of 47.5mL is 8.9 g/mL.

learn more about Density:

https://brainly.com/question/952755

#SPJ9

The ksp value for calcium hydroxide at this temperature is 5.20 × 10⁻⁶.

Ksp is an equilibrium constant of a solid substance dissolved in a liquid solution.

Given that, the volume of water is 0.178 l, 0.264 g of Ca(OH)² dissolves in enough water

The solution equilibrium is

Ca(OH)² = Ca + 2OH

The molar solubility is

0.186 / 74.00  / 0.230 = 0.0109 M

The ksp value will be

Ksp = (s) (2S)²

Putting the values in the formula

(0.0109) x (2 x 0.0109)² = 5.20 × 10⁻⁶.

Thus, the ksp value for calcium hydroxide is 5.20 × 10⁻⁶.

To learn more about ksp value, refer to the link:

https://brainly.com/question/27132799

#SPJ4

The difference between a molecule and a compound is a molecule is made up of pure substance and the same type of atoms, but a compound is made up of different kinds of atoms.

Molecules are substances that are made up of the same type of atoms. Examples are N³, O³- ozone, etc.

Compounds are made up of different kinds of atoms. Examples of compounds are water, made up of hydrogen and oxygen. H₂O.

Thus, a compound is made up of various types of atoms, as opposed to a molecule, which is composed of a pure substance and the same type of atoms.

To learn more about molecules and compounds, refer to the link:

https://brainly.com/question/21983682

#SPJ1

The correct answer is Nitrogen.

From the given question the electronic configuration of the element is given as:

1s²2s²2p³

hence, we know that the maximum no of electrons in the sub-shell

s= 2

p=6

while in this p has only 6 electrons.

Thus by counting the number of electrons in each sub-shell we can know the atomic number as several electrons in an atom is equal to the atomic number of the atom.

thus, the no of electrons present is- 2+2+3= 7

For, 7 electrons the element present will be nitrogen with atomic number 7.

To learn more about electronic configuration visit the ink:

https://brainly.com/question/13497372?referrer=searchResults

#SPJ4

Explanation:

for 9 i don't know the answer but it's 0.00000901 and for 12 it's 0.0027651

move double bond add line pairs to Oxygen and make negative then move a double bond into the hexagon