Answer : Another compound composed of only carbon and hydrogen can have any carbon to hydrogen mass ratio, depending on the number of atoms in the molecule and the atomic weights of the elements.
A compound containing only carbon and hydrogen can have any carbon to hydrogen mass ratio. This is because each element has its own atomic weight, and when combined in a compound the ratio of atoms or molecules can be different from the ratios of elements. For example, methane (CH4) has a mass ratio of 12:1 (carbon to hydrogen), while ethane (C2H6) has a mass ratio of 6:3.
It is important to note that the mass ratio is not the same as the molar ratio, which is determined by the number of atoms in the molecule. For example, ethylene (C2H4) has a molar ratio of 1:2, but its mass ratio is 6:4.
Know more about atomic weights here:
https://brainly.com/question/17464418
#SPJ11
roup 13 nitrides are isostructural and exhibit the layered graphite structure group of answer choices true false
The given statement, Group 13 nitrides are isostructural and exhibit the layered graphite structure is true because Group 13 nitrides have a hexagonal close-packed layer of nitrogen atoms, with alternating layers of boron, aluminum, or gallium atoms, resulting in a layered structure that resembles graphite due to comparable atomic radii and electronegativities of the elements.
Group 13 nitrides, such as boron nitride (BN), aluminum nitride (AlN), and gallium nitride (GaN), are isostructural and exhibit the layered graphite structure. The basic building block of the crystal structure is a hexagonal close-packed layer of nitrogen atoms, with alternating layers of boron, aluminum, or gallium atoms. This results in a layered structure that resembles that of graphite. The similarities between the crystal structures of these materials can be attributed to the comparable atomic radii and electronegativities of the Group 13 elements.
To know more about nitrides, here
brainly.com/question/16501916
#SPJ4
--The complete question is, Group 13 nitrides are isostructural and exhibit the layered graphite structure group of answer choices true false.--
How many moles is 54.0g of oxygen gas(O2)?
Answer:
Approximately 3.375 moles.
Explanation:
1 mole of oxygen is about 15.9 grams. And if you divide 54 by 15.9, you get 3.375.
elect any and all of these compounds that can undergo an addition and elimination reaction mechanism. OH OCH, A B C D E
Compounds that can undergo an addition and elimination reaction mechanism are OH and OCH3 since they are the ones that have a nucleophilic site or a leaving group.
The compounds that can undergo an addition and elimination reaction mechanism are listed below: OH - It is a hydroxyl group and is a nucleophile, which means it has an electron pair available for donation. OCH3 - Methoxy group, also known as OCH3, is a leaving group.
Addition reactions occur when two or more reactants combine to form a single product. They typically involve unsaturated compounds like alkenes or alkynes, which have double or triple carbon-carbon bonds. Elimination reactions, on the other hand, involve the removal of elements from a reactant to create a more unsaturated product, typically forming a double bond.
OH: This group represents an alcohol functional group. Alcohols can undergo elimination reactions, such as dehydration, to form alkenes.
OCH: This seems to be an incomplete functional group, as it is missing a carbon or hydrogen. If it's meant to represent an ether functional group (OCH3 or OCH2R, where R is an alkyl group), ethers generally do not undergo addition or elimination reactions.
In conclusion, without further information about compounds A, B, C, D, and E, we can only determine that a compound containing an OH functional group (an alcohol) can undergo elimination reactions, while the given OCH functional group does not undergo addition or elimination reactions.
To know more about nucleophilic site, refer here:
https://brainly.com/question/24297177#
#SPJ11
calculate the volume (in ml) of 2.230 m sucrose containing 0.7718 moles sucrose. include units in your answer.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:
Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)
Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol
Volume (ml) = 2.922 ml
The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.
Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.
When these values are plugged into the equation, the resulting volume is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
to know more about sucrose refer here:
https://brainly.com/question/29186350#
#SPJ11
What l formation does the first digit of VSEPR number provide?
The VSEPR (Valence Shell Electron Pair Repulsion) theory is used to predict the shapes of molecules based on the arrangement of electron pairs around the central atom.
The VSEPR theory assigns a numerical value, called the "VSEPR number", to each central atom in a molecule.
The first digit of the VSEPR number corresponds to the number of electron pairs around the central atom that are involved in bonding. Specifically:
A VSEPR number of 2 indicates that the central atom has 2 electron pairs involved in bonding (e.g. linear geometry).A VSEPR number of 3 indicates that the central atom has 3 electron pairs involved in bonding (e.g. trigonal planar or pyramidal geometry).A VSEPR number of 4 indicates that the central atom has 4 electron pairs involved in bonding (e.g. tetrahedral or square planar geometry).A VSEPR number of 5 indicates that the central atom has 5 electron pairs involved in bonding (e.g. trigonal bipyramidal geometry).A VSEPR number of 6 indicates that the central atom has 6 electron pairs involved in bonding (e.g. octahedral or square pyramidal geometry).The first digit of the VSEPR number is used to determine the general electron pair geometry around the central atom, which is a crucial factor in determining the molecular geometry of the molecule.
Learn more about VSEPR,
https://brainly.com/question/29756299
#SPJ4
where does the material in cement come from? choose one: a. it is deposited with sediment grains. b. it forms as sediment grains recrystallize. c. it forms as sediment grains chemically weather. d. it forms as ions precipitate out of the water in the pore spaces between grains.
The materials comes as It is deposited with sediment grains. (a)
The material used to make cement is composed of minerals found in sedimentary rocks. These sedimentary rocks are formed when sediment grains are deposited in layers and then hardened over time.
These sedimentary rocks can include sand, clay, and minerals such as calcite and gypsum. The sediment grains are the source of the material used to make cement.
The mixture is heated until it forms a paste-like material called clinker. The clinker is then ground into a fine powder, which is the cement we use for construction and other purposes.
So, cement is made from a mixture of these sediment grains, combined with water and other substances such as limestone, iron ore, and aluminum oxide. (a)
To know more about sedimentary rocks click on below link:
https://brainly.com/question/10709497#
#SPJ11
if i have a compound that is composed of 6.00 g of carbon, and 2.01 g of hydrogen, what is its formula?
The formula of a compound composed of 6.00 g of carbon and 2.01 g of hydrogen is CH₄.
The atomic weight of carbon is 12.01 g/mol, whereas hydrogen's atomic weight is 1.01 g/mol.
The number of moles of carbon present in the compound = 6.00 g ÷ 12.01 g/mol = 0.499 mol.
The number of moles of hydrogen present in the compound = 2.01 g ÷ 1.01 g/mol = 1.99 mol.
To make the quantity of carbon and hydrogen equal, both quantities should be divided by 0.499. As a result, the following ratio is obtained:-
Carbon: 0.499 mol/0.499 mol = 1
Hydrogen: 1.99 mol/0.499 mol = 4
The ratio of carbon to hydrogen is 1:4, which corresponds to the formula CH₄. Thus, the formula of the compound is CH₄.
Learn more about compound: https://brainly.com/question/704297
#SPJ11
which of these is not a subfamily of the hydrocarbon family? group of answer choices alkenes alkynes alkanes functionalized hydrocarbons aromatic hydrocarbons
Functionalized hydrocarbons is not a subfamily of the hydrocarbon family. Therefore, the correct option is option C.
A hydrocarbon is an organic molecule in organic chemistry that is made completely of hydrogen and carbon. Examples of group 14 hydrides include hydrocarbons. The majority of hydrocarbons are colourless and hydrophobic; they occasionally have a mild odour that is comparable to that of petrol or lighter fluid. They can be gases (like methane and propane), liquids (like hexane and benzene), low melting solids (like paraffin wax and naphthalene), or polymers (like polyethylene and polystyrene). They also occur in a wide variety of chemical configurations and phases. Functionalized hydrocarbons is not a subfamily of the hydrocarbon family.
Therefore, the correct option is option C.
To know more about hydrocarbon, here:
https://brainly.com/question/32019496
#SPJ12
In a mixture of oxygen and nitrogen gas, 90% of the total gas pressure is exerted by the nitrogen. If the total pressure is 5.0 atm, what pressure does the oxygen exert? (Number only, 1 decimal place)
The pressure exerted by oxygen gas, O₂, given that 90% of the total gas pressure is exerted by the nitrogen, is 0.5 atm
How do i determine the pressure exerted by oxygen gas?The following data were obtained from the question:
Percentage of nitrogen gas, N₂ = 90%Percentage of oxygen gas, O₂ = 100 - 90 = 10%Total pressure = 5.0 atmPressure exerted by oxygen gas, O₂ =?The pressure exerted by oxygen gas can be obtained as illustrated below:
Pressure exerted by oxygen gas = (percentage of oxygen gas / total percent) × total pressure
Pressure exerted by oxygen gas = (10 / 100) × 5
Pressure exerted by oxygen gas = 0.5 atm
Thus, we can conclude that the pressure exerted by oxygen gas is 0.5 atm
Learn more about partial pressure:
https://brainly.com/question/15577259
#SPJ1
the partial pressure of f2 in a mixture of gases where the total pressure is 1.00 atm is 300. torr. what is the mole fraction?
The partial pressure of F2 in a mixture of gases where the total pressure is 1.00 atm is 300 torr. The mole fraction is 0.149.
We need to calculate the mole fraction. The mole fraction is defined as the ratio of the number of moles of a component in a mixture to the total number of moles of all components in the mixture.The partial pressure of F2 is given to be 300 torr.
The total pressure is given to be 1.00 atm.
Partial pressure is the pressure exerted by one of the components of the mixture. It is defined as the product of the mole fraction and the total pressure.
The formula for mole fraction is:
nF2 / ntotal = partial pressure of F2 / total pressure
The mole fraction of F2 is given by:
nF2 / ntotal = (300 torr) / (1.00 atm) = 0.316
This is the mole fraction of F2. We need to find the mole fraction of the mixture.
The mole fraction of the mixture is given by:
nF2 + nO2 / ntotal
= partial pressure of F2 + partial pressure of O2 / total pressurenO2 / ntotal
= (1.00 atm - 300 torr) / (1.00 atm)
= 0.70nF2 / ntotal + 0.70 = 1.00nF2 / ntotal
= 0.30
The mole fraction of F2 is:nF2 / ntotal = 0.30
The mole fraction of the mixture is:
nF2 + nO2 / ntotal = nF2 / ntotal + nO2 / ntotal = 0.30 + 0.70 = 1.00
Therefore, the mole fraction of the mixture is 1.00. The mole fraction of F2 is 0.30. The mole fraction of O2 is 0.70.
The sun has a mass that is 333000 greater than earths. Even though the mass of the sun is so great, the moon stays in orbit around the Earth, which of the following best explains why the moon stays in orbit around the Earth.
The moon stays in orbit around the Earth because of the gravitational force between them.
What is the impact of gravitational force on moon?Despite the Sun having a much larger mass than the Earth and the Moon, the gravitational force between the Earth and the Moon is stronger due to their proximity. The gravitational force of the Earth on the Moon is what keeps it in orbit around the Earth.
This is because gravity is proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between them. Although the Sun has a much larger mass than the Earth, it is also much farther away from the Moon, so the gravitational force it exerts on the Moon is much weaker than the gravitational force of the Earth on the Moon.
Therefore, it is the combination of the Moon's velocity and the gravitational force of the Earth that keeps it in orbit around the Earth, despite the much greater mass of the Sun.
Learn more about gravitational force here: https://brainly.com/question/27943482
#SPJ1
How many moles are in 3.5 moles of FeF3
We just use molar mass for FeF3 (129.9 g/mol) to calculate the number moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.
Describe the Mass.An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.
55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3
0.207 moles×6.022×23molecules/mole=1.2×1023molecules
How is mass measured?A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
during chemical weathering, sodium is released as dissolved ions and transported to the ocean, where:
Answer: During chemical weathering, sodium is released as dissolved ions and transported to the ocean, where it increases the salinity of the seawater.
Salinity is a measure of the amount of salt in seawater. The greater the salinity, the more salt there is in the water. The salinity of seawater is expressed in parts per thousand (ppt). There are about 35 ppt of salt in seawater.
Chemical weathering is the breakdown of rocks by chemical reactions, resulting in the formation of new minerals. Water is the most common medium for chemical weathering because it can dissolve many minerals. Carbon dioxide, oxygen, and organic acids are also involved in chemical weathering.
Sodium is a common element in minerals that are subject to chemical weathering. When rocks weather, sodium ions are released into the water. Rivers and streams transport these dissolved ions to the ocean, where they accumulate over time.
This is why seawater has a high concentration of sodium ions. Sodium is also introduced into seawater through underwater volcanoes and hydrothermal vents.
Sodium is important for many organisms that live in the ocean. It is an essential nutrient for marine animals, and it plays a role in regulating the body fluids of fish and other aquatic animals. Sodium is also important for maintaining the pH of seawater.
The concentration of sodium in seawater can also have an impact on ocean currents and the movement of water around the world.
Learn more about sodium here:
https://brainly.com/question/29327783#
#SPJ11
hich of the following statements correctly describes a racemic mixture? multiple choice question. a mixture containing equal amounts of two diastereomers
do the particles at the surface of a liquid behave differently from those in the bulk of the liquid? explain.
Answer: Yes, the particles at the surface of a liquid behave differently from those in the bulk of the liquid. It is because of the different intermolecular forces that act on the surface particles in comparison to the bulk particles.
Surface tension is the force that holds the surface molecules of a liquid together. When a force is applied to the surface, the particles pull together and create a thin, strong layer. The surface molecules experience intermolecular forces from the molecules above and below them, but the ones below the surface experience more force from the molecules around them.
Because the surface molecules are more strongly attracted to each other than the molecules underneath, they behave differently. They are attracted to each other and form a strong bond that resists any force that might try to pull them apart. In contrast, the molecules in the bulk of the liquid experience less force from their neighbors and are more free to move around. This difference in behavior can be observed in several ways.
For example, the surface of a liquid tends to be flatter than the bulk of the liquid. This is because the surface molecules are more tightly bound and resist any tendency to form curves or bulges.
In addition, the surface molecules can evaporate more easily than the bulk molecules, leading to phenomena such as capillary action and evaporative cooling.
Learn more about intermolecular forces here:
https://brainly.com/question/9007693#
#SPJ11
what city near the chernobyl nuclear power plant was completely evacuated following the nuclear disaster and remains a ghost town today?
The city of Pripyat, Ukraine, located approximately 2.5 miles away from the Chernobyl Nuclear Power Plant, was completely evacuated following the nuclear disaster of April 26th, 1986.
This city, which was home to nearly 50,000 residents at the time, remains a ghost town today. The Chernobyl Nuclear Power Plant was in the process of conducting a safety test at the time of the disaster, which involved shutting down the reactor and ensuring its safety systems were working. Unfortunately, a flaw in the reactor caused a chain reaction and led to a large amount of radiation being released into the environment.
The fallout from the disaster was massive, and the nearby city of Pripyat was severely affected. In response, the Ukrainian government ordered the entire city to be evacuated immediately. Over the course of three days, 50,000 residents were relocated to safer areas, leaving the city a ghost town. Today, Pripyat is still considered uninhabitable and is a popular tourist attraction. Tourists can explore the deserted city and observe the effects of the disaster firsthand.
To know more about nuclear power plant click on below link :
https://brainly.com/question/4246037#
#SPJ11
partial older osteons can be found between complete newer osteons. these partial osteons are referred to as
Partial, older osteons are cylindrical structures that are found between newer, more complete osteons. These structures, also known as fragments,
consist of concentric layers of lamellae surrounding a central canal, or Haversian canal.
The lamellae and the Haversian canal are formed during the process of osteon remodeling, which involves the removal of old osteons and their replacement with new ones.
The fragments of old osteons that remain in the matrix between new osteons are referred to as “intermediate,” “intermediate osteons,” or “partial osteons.”
They can be distinguished from the newer, complete osteons by their decreased size and lack of a central Haversian canal.
Partial osteons are important for a number of reasons. They help maintain the structural integrity of the bone, provide additional strength and stability, and increase the bone’s resistance to compressive and tensile stresses.
Partial osteons also act as an area of interface between two different age groups of osteons, allowing them to resist shear forces.
Finally, the presence of partial osteons in the bone matrix may increase the rate of healing after fracture or trauma.
to know more about osteons refer here:
https://brainly.com/question/30327119#
#SPJ11
if a glass marble weighs 3150 mg, what is the mass in centigrams? group of answer choices 31,050 cg 31.5 cg 3.15 cg none of these 315 cg
The mass of a glass marble, which is 3150 mg, is 0.315 centigrams. Therefore, the correct option is 3.15 cg.
A type of rock that is created from metamorphic rock composed mainly of carbonate minerals, particularly calcite or dolomite, is known as marble.
Marble is often used as a building material, and it has been used in sculptures for thousands of years. Marble has also been used for flooring, wall coverings, and countertops, among other things.
Marble is resistant to moisture, which makes it ideal for use in bathrooms and kitchens. It's also a great heat-resistant material, which is why it's used in fireplace surrounds and other applications where heat is present.
The marble surface is created by polishing or honing a marble slab. Honing roughs the surface of the stone, while polishing shines it to a high gloss.
Because of its visual appeal, durability, and ease of maintenance, marble is often used in high-end homes and commercial buildings.
It has a smooth texture that feels cool to the touch, making it ideal for hot climates because it keeps surfaces cool.
The substance is well-known for its attractive appearance, and it is frequently used in bathrooms and spas for its aesthetic
A metric unit of mass equal to one-hundredth of a gram (or 10−5 kilogram) is known as a centigram (cg). When determining the weight of objects or ingredients, the centigram is frequently used.
This unit is equal to 0.01 grams in the metric system. The abbreviation "cg" stands for centigrams. To convert a weight from milligrams to centigrams, simply move the decimal point two places to the left.
The formula for converting milligrams to centigrams is as follows: 1 milligram = 0.01 centigrams. As a result, the mass of a glass marble that weighs 3150 mg is equal to 0.315 centigrams.
to know more about marble refer here:
https://brainly.com/question/29287929#
#SPJ11
For each bond, select the arrow that indicates the direction of bond polarity. [chemistry formula]
For each bond, there are two arrows that indicate the direction of bond polarity. The arrow represents the more electronegative atom, and it points to the partially negative end of the bond. The arrow points to the more electronegative element, and the partially positive end of the bond.
For example, in the hydrogen chloride (HCl) molecule, the more electronegative atom is chlorine, with an electronegativity of 3.16. Hydrogen, on the other hand, has an electronegativity of 2.2. As a result, the bond is polarized, and the electron density is shifted towards the chlorine atom. Therefore, the polarity direction of the H-Cl bond will be: H → Cl.
Bond polarity is essential to chemistry because it influences the way atoms interact with one another, the formation of chemical compounds, and the resulting properties. To determine the direction of bond polarity in a chemical formula, follow these steps:
Identify the two atoms involved in the bond. Determine the electronegativity values of both atoms. You can find these values in an electronegativity table or chart. Compare the electronegativity values. The atom with the higher electronegativity will have a stronger pull on the shared electrons, making it the more electronegative end of the bond.
Draw an arrow from the less electronegative atom (partial positive charge) to the more electronegative atom (partial negative charge). This arrow indicates the direction of bond polarity. This implies that the arrow that represents the bond polarity direction is from the less electronegative atom to the more electronegative atom.
Remember, the arrow always points towards the more electronegative atom in the bond.
Complete question: For Each Bond, Select The Arrow That Indicates The Direction Of Bond Polarity. F-CH3 H3C-NH2 Br—MgCH3
To know more about bond polarity, refer here:
https://brainly.com/question/15099999#
#SPJ11
i. if you conducted this coupling step under acidic conditions, how would you expect the reaction rate to be affected?
If you conducted this coupling step under acidic conditions, you expect the reaction rate to be affected because at low pH values, the carboxylic acid is transformed into a more electrophilic species, which is easily attacked by the nucleophile, and the yield of the amide bond would be high.
In organic synthesis, coupling reactions are common, and they include the combination of a nucleophile with an electrophile to form a covalent bond. The coupling reaction between a carboxylic acid and an amine is a straightforward way to synthesize an amide in the presence of an activating agent (a molecule that can increase the electrophilicity of the carboxylic acid).
It is worth noting that there are various methods for synthesizing amides, including chemical and enzymatic methods. Coupling reactions are the most frequent chemical methods used for the synthesis of amides.
Learn more about nucleophile at:
https://brainly.com/question/6357352
#SPJ11
what do the dashed lines represent in the illustration of the transition state of a reaction between brch3 and oh--?
The dashed lines in the illustration of the transition state of a reaction between BrCH3 and OH- represent partial bond formation and bond breaking.
The transition state is the highest energy point in a chemical reaction, where the reactants are transformed into products. In this transition state, the reactants are in a state of instability and are subject to significant energy changes. The transition state is the state at which the energy of the reactants is highest. When the reactants react and form products, the energy is decreased. The transition state is the point at which the reaction barrier must be crossed for the reaction to proceed.
The dashed lines in the illustration represent the partial bond formation and bond breaking that occur during the transition state. The bond formation is represented by the dashed lines going toward the Br and O atoms, which indicates that these atoms are beginning to share electrons. Meanwhile, the dashed lines going away from the Br-C and C-O atoms indicate the bond breaking that is occurring during the reaction. In general, the dashed lines represent the changing bond lengths and bond energies that are occurring during the transition state. This depiction of the transition state is an important tool for chemists to understand how reactions occur and how they can be optimized. Understanding the mechanism of a reaction can help scientists design more efficient and effective reactions, which can be used to synthesize a wide variety of compounds.
Know more about transition state here:
https://brainly.com/question/30835920
#SPJ11
calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water.
The volume of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water is 540 ml.
To calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water, you will need the following formula:
C1V1 = C2V2
Where C1 is the initial concentration of the solution (in this case, 100%), V1 is the initial volume of the solution (unknown), C2 is the final concentration of the solution (in this case, 60%), and V2 is the final volume of the solution (900 ml).
To solve for V1, we can rearrange the formula as follows:
V1 = (C2V2) / C1
Plugging in the values, we get:
V1 = (0.60 * 900) / 1.00
V1 = 540 ml
Therefore, you will need 540 ml of 100% ethanol to make 900 ml of a 60% (v/v) solution of ethanol in water.
To know more about ethanol, refer here:
https://brainly.com/question/30263729#
#SPJ11
if 20.0 ml of a 0.0800 m hno3, 35.0 ml of a 0.0500 m kscn, and 80.0 ml of a 0.0700 m fe(no3)3 are combined, what is the initial concentration of fe3 in the mixture? do not use scientific notation in your answer.
Answer: The initial concentration of Fe3 in the mixture is 8.95 mL.
The initial concentration of Fe3 in the mixture can be calculated using the equation: c1V1 + c2V2 + c3V3 = c, where c is the total molarity, V1, V2, and V3 are the volumes of the respective solutions, and c1, c2, and c3 are the initial molarities.
In this case, we have 20.0 ml of a 0.0800 M HNO3, 35.0 ml of a 0.0500 M KSCN, and 80.0 ml of a 0.0700 M Fe(NO3)3.
We can then calculate the initial concentration of Fe3 in the mixture as follows:
c = (0.0800 M * 20.0 mL) + (0.0500 M * 35.0 mL) + (0.0700 M * 80.0 mL)
c = (1.6 mL) + (1.75 mL) + (5.6 mL)
c = 8.95 mL
Therefore, the initial concentration of Fe3 in the mixture is 8.95 mL.
Learn more about initial concentration here:
https://brainly.com/question/14498400#
#SPJ11
43.5-grams of barium sulfate is formed from the reaction of barium nitrate and sodium sulfate. how many moles of sodium sulfate reacted?
Answer: 0.25 moles
Explanation:
To determine the number of moles of sodium sulfate that reacted, we need to first identify the limiting reagent in the reaction between barium nitrate and sodium sulfate. The balanced chemical equation for the reaction is:
Ba(NO3)2 + Na2SO4 → BaSO4 + 2NaNO3
The stoichiometry of the reaction tells us that one mole of barium sulfate is produced for every mole of sodium sulfate that reacts. Therefore, we can calculate the number of moles of sodium sulfate that reacted by dividing the mass of barium sulfate produced by its molar mass:
43.5 g BaSO4 × (1 mol BaSO4/233.4 g BaSO4) = 0.186 mol BaSO4
Since one mole of sodium sulfate reacts with one mole of barium sulfate, the number of moles of sodium sulfate that reacted is also 0.186 mol.
However, this is the number of moles of barium sulfate that was formed. To determine the number of moles of sodium sulfate that reacted, we need to use the stoichiometry of the balanced chemical equation. The ratio of the coefficients of sodium sulfate to barium sulfate in the balanced equation is 1:1. Therefore, the number of moles of sodium sulfate that reacted is also 0.186 mol.
The term mole concept is used here to determine the moles of sodium sulfate reacted. The moles of sodium sulfate formed from 43.5-grams of barium sulfate is 0.186 moles.
What is a mole?One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:
Number of moles = Given mass / Molar mass
Here the balanced equation is:
Ba(NO₃)₂ + Na₂SO₄ → BaSO₄ + 2NaNO₃
The stoichiometry of the reaction tells us that one mole of barium sulfate is produced for every mole of sodium sulfate that reacts. Therefore, we can calculate the number of moles of sodium sulfate that reacted by dividing the mass of barium sulfate produced by its molar mass:
43.5 g BaSO4 × (1 mol BaSO4/233.4 g BaSO4) = 0.186 mol BaSO4
To know more about mole concept, visit;
https://brainly.com/question/19730733
#SPJ2
hydrogen peroxide decomposes into water and oxygen at constant pressure by the following reaction 2 h2o2--> 2 h2o o2 deltah -196 kj. calculate the value of q in kj in this exothermic reaction when 2.00g of hydrogen peroxide decomposes at constant pressure
The decomposition of hydrogen peroxide into water and oxygen is an exothermic reaction, and its value can be calculated using the enthalpy change. The enthalpy change is the amount of energy released or absorbed during a chemical reaction. In this reaction, the enthalpy change is -196 kJ, which means that the reaction releases 196 kJ of
energy when 2 moles of hydrogen peroxide are decomposed into water and oxygen at constant pressure.
Now, we need to calculate the value of q in kJ when 2.00 g of hydrogen peroxide is decomposed at constant pressure. The molar mass of hydrogen peroxide (H2O2) is 34.0147 g/mol. So, the number of moles of hydrogen peroxide can be
calculated as follows:
Number of moles of H2O2 = mass of H2O2 / molar mass of H2O2
Number of moles of H2O2 = 2.00 g / 34.0147 g/mol
Number of moles of H2O2 = 0.05878 mol
As per the balanced chemical equation, 2 moles of hydrogen peroxide are required to produce 2 moles of water and 1 mole of oxygen. So, the number of moles of water and oxygen produced can be calculated as follows:
Number of moles of H2O = 2 x 0.05878 mol = 0.11756 mol
Number of moles of O2 = 1 x 0.05878 mol = 0.05878 mol
The enthalpy change is -196 kJ per 2 moles of hydrogen peroxide. So, the enthalpy change per 1 mole of hydrogen peroxide can be calculated as follows:
Enthalpy change per 1 mole of H2O2 = -196 kJ / 2 mol
Enthalpy change per 1 mole of H2O2 = -98 kJ/mol
For more similar questions on topic hydrogen peroxide
brainly.com/question/11743179
#SPJ11
Zn(s)+CuSO4(aq)→Cu(s)+ZnSO4(aq)When a zinc plate is placed in an aqueous solution of copper sulfate, elemental copper forms, as represented by the equation above. Which of the following represents the reduction half-reaction of the reaction?O Cu2+(aq)+2e−→Cu(s)O Ag+(aq)+Cl−(aq)→AgCl(s)O Fe2+(aq)→Fe3+(aq)+e−O HF(aq)+OH−(aq)→H2O(l)+F−(aq)
The correct reduction half-reaction for the given chemical equation (Zn(s) + CuSO₄(aq) → Cu(s) + ZnSO₄(aq)) is:
Cu²⁺(aq) + 2e⁻ → Cu(s)
1. First, let's identify the species that are changing their oxidation states in the reaction. It's zinc (Zn) and copper (Cu).
2. Zn is undergoing oxidation, as it is losing electrons and forming Zn²⁺ in ZnSO₄. Cu²⁺ from CuSO₄ is gaining electrons and forming elemental copper (Cu).
3. Now, we'll focus on the copper half-reaction to find the reduction half-reaction. Reduction is the process of gaining electrons, so we need to identify the half-reaction where Cu²⁺ gains electrons.
4. The given reduction half-reaction is Cu²⁺(aq) + 2e⁻ → Cu(s), which represents the process where Cu²⁺ ions from the copper sulfate solution gain two electrons to form solid copper.
5. To confirm this, we can check the other options provided:
a. Ag⁺(aq) + Cl⁻(aq) → AgCl(s) - This is a precipitation reaction
b. Fe²⁺(aq) → Fe³⁺(aq) + e⁻ - This is an oxidation half-reaction involving iron
c. HF(aq) + OH⁻(aq) → H₂O(l) + F⁻(aq) - This is an acid-base neutralization reaction
So, the correct reduction half-reaction for the given chemical equation is Cu²⁺(aq) + 2e⁻ → Cu(s).
to know more about half-reaction refer here:
https://brainly.com/question/13109589#
#SPJ11
When pale yellow chlorine gas is bubbled through a clear, colorless solution of sodium iodide, the solution turns brown. What type of reaction is taking place?
When a strong acid such as HCl is added to the carbonic acid buffer system ____a. carbonic acid is converted into bicarbonate b. more carbonic acid is formedc. hydrochloric acid is neutralized by sodium hydroxided. the blood plasma pH is reduced
When a strong acid such as HCl is added to the carbonic acid buffer system, carbonic acid is converted into bicarbonate. The correct option is (A).
The carbonic acid buffer system is a mechanism that helps to maintain the pH of blood within the normal range. The carbonic acid buffer system works by regulating the concentrations of bicarbonate (HCO3-) and carbonic acid (H2CO3) in the blood.
When a strong acid like hydrochloric acid (HCl) is added to the carbonic acid buffer system, carbonic acid is converted into bicarbonate.
The bicarbonate is then able to bind with hydrogen ions (H+) from the strong acid, preventing a significant decrease in the blood pH.
This reaction can be represented as follows:
H2CO3 + HCl → HCO3- + H2O + Cl
This reaction is a simple equilibrium reaction. As more HCl is added, the concentration of bicarbonate increases as it is produced in the reaction. This increase in bicarbonate concentration helps to buffer the excess hydrogen ions from the strong acid, reducing its effect on the pH of blood.
Therefore, the answer to the given question is option A, carbonic acid is converted into bicarbonate.
To know more about buffer system, refer here:
https://brainly.com/question/27548311#
#SPJ11
which of the following are compounds? question 37 options: a) h2o and o2 b) h2o, o2, and ch4 c) h2o and ch4, but not o2 d) o2 and ch4
Compounds are substances that are made up of two or more elements chemically bonded together.Option A: H2O and O2 are both compounds. H2O is water and O2 is oxygen, both of which are made up of two elements.
Option B: H2O, O2, and CH4 are all compounds. H2O is water, O2 is oxygen, and CH4 is methane, all of which are made up of two or more elements.
Option C: H2O and CH4 are both compounds, but O2 is not. H2O is water and CH4 is methane, both of which are made up of two or more elements. O2 is oxygen, which is not a compound since it is made up of a single element.
Option D: O2 and CH4 are both compounds. O2 is oxygen and CH4 is methane, both of which are made up of two or more elements.
To know more about compounds click on below link :
https://brainly.com/question/14117795
#SPJ11
Ion channels are classified as membrane transport proteins. Channels discriminate by size and charge. In addition to Na+, which one of the following ions would you expect to be able to freely diffuse through a Na+ channel?
a) Mg2+
b) H+
c) K+
d) Cl-
Ion channels are classified as membrane transport proteins. Channels discriminate by size and charge.
What are transport membrane proteins?
Transport membrane proteins are proteins that aid in the movement of molecules across the membrane. These transport membrane proteins come in various forms and serve various functions, including regulating molecules' passage. As a result, they play a vital role in cell homeostasis.
What are ion channels?
Ion channels are pore-forming proteins found in the membranes of all cells, which facilitate the diffusion of ions down their electrochemical gradient across the plasma membrane.
What is diffusion?
Diffusion is the random movement of particles from an area of higher concentration to an area of lower concentration. It is the primary mechanism of particle transport in cells.
How does ion diffusion work?
Ion diffusion is a type of passive transport that occurs spontaneously down an electrochemical gradient, from an area of high concentration to an area of low concentration, through a semipermeable membrane. It is facilitated by ion channels, which are membrane transport proteins that allow ions to move across the plasma membrane down their electrochemical gradient.
The charge and size of the ion channels determine the molecules that can pass through the membrane via these channels. Small ions like Na+ and K+ can pass through the ion channels easily, while larger ions cannot.
Na+ channels also permit the passage of K+ ions but not Mg2+ or Cl-.
Therefore, in addition to Na+, K+ is expected to freely diffuse through Na+ channels.
Answer: c) K+.
To know more about the ion channel https://brainly.com/question/29415412
#SPJ11