A copper wire of length 10m and radius 1mm is extended by 1.5mm when subjected to a tension of 200N calculate the energy density of the wire.​

In this scenario, we need to use the Doppler effect equation to calculate the minimum velocity required for the sound to be heard. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source.

The equation we will use is:

f' = f (v + vobs) / (v - vs)

Where f is the original frequency (35.1 kHz), v is the velocity of sound (343 m/s), vobs is the velocity of the observer (126 m/s), and vs is the velocity of the source (which is assumed to be zero in this case).

To find the new frequency, f', that would be heard by the second airplane, we need to solve for v2, the velocity of the second airplane. We also need to know the range of audible frequencies, which is typically between 20 Hz and 20 kHz.

If we plug in the given values, we get:

f' = 35.1 kHz (343 m/s + 126 m/s) / (343 m/s - v2)

Simplifying this equation gives:

f' = 1.304 + 0.00367v2

To find the minimum velocity that would put the frequency in the audible range, we can set f' equal to 20 kHz:

20 kHz = 1.304 + 0.00367v2

Solving for v2 gives:

v2 = 5,355 m/s

This means that the second airplane must fly at a minimum velocity of 5,355 m/s in order for the sound to be shifted into the audible frequency range. This is obviously impossible, so the whistle would not be heard by the second airplane.

In conclusion, the Doppler effect is a fascinating phenomenon that can help us understand how waves behave when the observer or source is in motion. By using the Doppler equation, we can calculate the shift in frequency and determine whether a sound will be audible or not. In this particular scenario, we see that the minimum velocity required for the sound to be heard is far beyond what is physically possible.

To know more about Doppler effect refer here

https://brainly.com/question/15318474#

#SPJ11

Answer:

360 N/m

Explanation:

The angular acceleration of the carnival ride is approximately -0.33 rad/s² (rounded to two significant digits).

Angular acceleration is defined as the rate of change of angular velocity with respect to time. It is measured in radians per second squared. In this problem, the carnival ride initially rotates counterclockwise at a rate of 2.0 radians per second and comes to rest over an angular displacement of 6.0 radians with a constant acceleration.

To find the angular acceleration of the carnival ride, we can use the following equation:

ω² = ω₀² + 2αθ

where ω is the final angular velocity (0 rad/s since the ride comes to rest), ω₀ is the initial angular velocity (2.0 rad/s, counterclockwise), α is the angular acceleration, and θ is the angular displacement (6.0 rad, counterclockwise).

Since counterclockwise rotation is considered positive in the given coordinate system, we have:

0² = (2.0 rad/s)² + 2α(6.0 rad)

Rearranging to solve for α:

α = - (2.0 rad/s)² / (2 × 6.0 rad)

α = - 4.0 / 12.0 = -0.33 rad/s²

To Know more about the angular acceleration, click here;

https://brainly.com/question/29428475

#SPJ11

Answer:

EK = 440 Joule

Explanation:

Known:

m = 55 kg

v = 4 m/s

Ek = ?

Equation to solve this is:

Ek = 1/2 m [tex]v^{2}[/tex]

Ek = 1/2 . (55) . [tex](4)^{2}[/tex]

Ek = 440 J

The farthest bright galaxies that modern telescopes are currently capable of seeing are up to several billions of light-years away. The exact distance depends on various factors such as the sensitivity and resolution of the telescope, observational techniques, and the brightness of the galaxy itself.

Modern telescopes, such as the Hubble Space Telescope and large ground-based observatories equipped with advanced instruments, have greatly advanced our ability to observe and study distant galaxies. These telescopes can detect and capture the light from galaxies that existed when the universe was relatively young.

Through deep field observations and gravitational lensing techniques, astronomers have been able to observe galaxies that are more than 13 billion light-years away. These observations provide valuable insights into the early universe and its evolution.

It's important to note that the term "bright" is relative and can vary depending on the context and specific criteria used for brightness. Additionally, ongoing advancements in telescope technology continue to push the limits of observation, and future telescopes and space missions are expected to enable us to see even farther into the universe.

To know more about  telescopes refer here

https://brainly.com/question/19349900#

#SPJ11

The landscaper uses 75.00 joules of work to move the lawn mower.

Work is the product of force and displacement, in the direction of the force.

Given that the landscaper uses a force of 15.00 N to push a lawn mower, the amount of work done depends on the distance the mower is pushed.

If we assume that the mower is pushed a distance of 5 meters, the work done can be calculated as follows:

Work = force x distance x cos(theta)

where theta is the angle between the force and the direction of displacement, which we assume to be zero degrees in this case. Therefore, the work done can be calculated as:

Work = 15.00 N x 5 m x cos(0) = 75.00 J

Therefore, the landscaper uses 75.00 joules of work to move the lawn mower.

To know more about joules, refer here:

https://brainly.com/question/25947916#

#SPJ11

The tension on the rope is 885 N.

To find the tension on the rope, we need to consider both the gravitational force acting on the hero and the additional force required to provide the constant acceleration. Here's a step-by-step explanation:

1. Calculate the gravitational force acting on the hero using the formula, Force due to gravity = m * g, where m is the  mass (75.0 kg) and g is the acceleration due to gravity (9.81 m/s²).

Force due to gravity = 75.0 kg * 9.81 m/s² ≈ 735.75 N

2. Calculate the additional force required to provide the constant acceleration of 2.00 m/s² using the formula Force          due to acceleration = m * a, where m is the mass (75.0 kg) and a is the acceleration (2.00 m/s²).
 

Force due to acceleration= 75.0 kg * 2.00 m/s² = 150 N

3. Add both forces to find the tension on the rope, which is the sum of the gravitational force and the additional force  needed for acceleration.
  Tension =  Force due to gravity+ Force due to acceleration
  Tension = 735.75 N + 150 N
  Tension = 885.75 N

Therefore, the tension on the rope is approximately 885 N (rounded to the nearest whole number).

Know more about  tension in string click here;

https://brainly.com/question/14177858

#SPJ11

The electrostatic force between the electrons is approximately 2.31 x 10⁻²⁸ N, acting in a repulsive manner.

To find the electrostatic force between the two electrons, we will use Coulomb's Law, which states that the electrostatic force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them. Mathematically, this is represented as:

F = (k * q1 * q2) / r²

Where k is Coulomb's constant, approximately equal to 8.99 x 10⁹ Nm²/C². In this problem, both electrons have a charge of -1.6 x 10⁻¹⁹ C, and they are separated by a distance of 3.4 x 10⁻¹¹ m. Plugging these values into the equation, we get:

F = (8.99 x 10⁹ Nm²/C² * (-1.6 x 10⁻¹⁹ C) * (-1.6 x 10⁻¹⁹ C)) / (3.4 x 10⁻¹¹ m)²

Calculating the force:

F ≈ 2.31 x 10⁻²⁸ N

Since both electrons have negative charges, the electrostatic force between them is repulsive. This is because like charges repel each other, while opposite charges attract. In this case, the two electrons have the same negative charge, which causes them to repel one another.

For more about electrostatic force:

https://brainly.com/question/9774180

#SPJ11

Wavelength of the light that is received by the observer on the Earth is 5.4 x 10⁻⁷m.

a) Speed of the galaxy, v = 3.9 x 10⁴ m/s

Speed of light, c = 3 x 10⁵ m/s

Wavelength of the light emitted from the galaxy, λ = 6.2 x 10⁻⁷m

(i) The expression for the change in wavelength of the light that is received by the observer on the Earth is given by,

Δλ = (v/c)λ

Δλ = (3.9 x 10⁴/3 x 10⁵) 6.2 x 10⁻⁷

Δλ = 8.06 x 10⁻⁸m

(ii) Wavelength of the light that is received by the observer on the Earth,

λ' = λ - Δλ

λ' = 5.4 x 10⁻⁷m

b) Redshifts have been observed for almost all galaxies. When light from far-off galaxies travels from the galaxy to our telescopes, it is stretched (made redder) by the universe's expansion, which is known as "cosmological redshift".

To learn more about Redshift, click:

https://brainly.com/question/13494718

#SPJ1

The process of charge separation, driven by updrafts and downdrafts in a thunderstorm, causes regions within the storm cloud to become oppositely charged, leading to the Electrostatic discharge known as lightning.

Lightning occurs due to electrostatic discharge between two electrically charged regions within a thunderstorm. These regions become oppositely charged through a process called charge separation.

Charge separation begins when updrafts and downdrafts within a thunderstorm cause ice particles, hail, and water droplets to collide. During these collisions, electrons are transferred between particles, resulting in some particles becoming positively charged while others become negatively charged.

The lighter, positively charged ice particles are carried upward by the updrafts, accumulating at the top of the storm cloud. Conversely, the heavier, negatively charged particles, such as hail, are carried downward by gravity and downdrafts, accumulating at the base of the cloud.

This separation of charges creates an electric field between the top and bottom regions of the cloud. When the electric field becomes strong enough, it overcomes the air's insulating properties, allowing electrons to flow from the negatively charged region to the positively charged region. This flow of electrons results in a lightning discharge.

In summary, the process of charge separation, driven by updrafts and downdrafts in a thunderstorm, causes regions within the storm cloud to become oppositely charged, leading to the electrostatic discharge known as lightning.

To Learn More About Electrostatic

https://brainly.com/question/17692887

SPJ11

Hormones send signal → Egg released from ovary → Egg travels to fallopian tube.

Hormones send signal: The process of ovulation is triggered by hormonal signals. In the female reproductive system, the pituitary gland releases follicle-stimulating hormone (FSH) and luteinizing hormone (LH) in response to the signals from the hypothalamus. These hormones play a crucial role in the maturation of ovarian follicles and the release of an egg from the ovary.

Egg is released from the ovary: Once the hormonal signals are received, the dominant ovarian follicle (containing a developing egg) reaches maturity.

The surge in luteinizing hormone (LH) triggers the release of the egg from the ovary. This is known as ovulation. The released egg is then available for potential fertilization.

Egg travels to the fallopian tube: After ovulation, the released egg, also known as the ovum or oocyte, travels through the fallopian tube. The fallopian tubes, also called uterine tubes, are structures that connect the ovaries to the uterus.

The fallopian tubes have finger-like projections called fimbriae that help capture the released egg and guide it into the tube.

In summary, the correct order of processes before and during ovulation is as follows:

Hormones send signal

Egg is released from the ovary

Egg travels to the fallopian tube

These processes are essential for successful reproduction in females and are part of the menstrual cycle.

To learn more about fallopian, refer below:

https://brainly.com/question/3477462

#SPJ11

Answer:

d

Explanation:

edge

The normal force exerted on the crate by the elevator is 294 N. The normal force is the force exerted by a surface perpendicular to an object in contact with it.

In this case, the crate is in contact with the floor of the elevator. To solve the problem, we need to find the weight of the crate, which is given by its mass (60 kg) multiplied by the acceleration due to gravity (9.8 m/s2).

So the weight of the crate is 588 N. The force exerted on the crate by the elevator is the normal force.

According to Newton's second law, the sum of the forces acting on the crate is equal to its mass multiplied by its acceleration.

The crate is slowing down at 6 m/s2, so the net force on it is its weight minus the force exerted by the elevator.

Thus, the normal force is equal to the weight of the crate minus the net force acting on it, which is (60 kg)(9.8 m/s2) - (60 kg)(6 m/s2) = 294 N. Therefore, the normal force exerted on the crate by the elevator is 294 N.

To know more about Newton's second law, refer here:

https://brainly.com/question/13447525#

#SPJ11

The electrical force is approximately [tex]10^{43}[/tex] times larger than the gravitational force. This is because the electrical force is much stronger than the gravitational force, due to the large difference in the strength of the fundamental forces involved.

To calculate the gravitational force between two protons, we use the equation:

[tex]F_g = G * (m_p)^2 / r^2[/tex]

where

G is the gravitational constant,

[tex]m_p[/tex] is the mass of a proton, and

r is the distance between the centers of the two protons.

Plugging in the values given, we get:

[tex]F_g = 6.67 * 10^-11 Nm^2/kg^2 * (1.67 * 10^-27 kg)^2 / (4.25 * 10^-15 m)^2[/tex]

[tex]= 1.72 x 10^{-51} N[/tex]

To calculate the electrical force between the protons, we use the equation:

[tex]F_e = k * (q_p)^2 / r^2[/tex]

where

k is the Coulomb constant,

[tex]q_p[/tex] is the charge of a proton, and

r is the distance between the centers of the two protons.

Plugging in the values given, we get:

[tex]F_e = 9 *10^9 Nm^2/C^2 * (1.6 * 10^-19 C)^2 / (4.25 * 10^-15 m)^2[/tex]

= 2.32 x [tex]10^{-8}[/tex] N

Comparing the two forces, we see that the electrical force is much larger than the gravitational force. The electrical force is approximately [tex]10^{43[/tex]times larger than the gravitational force.

This is because the electrical force is much stronger than the gravitational force, due to the large difference in the strength of the fundamental forces involved.

To know more about gravitational force refer here

brainly.com/question/12528243#

#SPJ11

The two smallest positive values of x for which [tex]\left|\Psi(x,t)\right|^2[/tex] is a maximum at t=0 are π/2k and 3π/2k.

To find the values of x for which the probability function [tex]\left|\Psi(x,t)\right|^2[/tex] is maximum at t=0, we need to calculate [tex]\left|\Psi(x,t)\right|^2[/tex] and find its maximum values.

The probability density [tex]\left|\Psi(x,t)\right|^2[/tex] gives the probability of finding the particle at position x at time t. In this case, the wave function is given by:

[tex]\Psi(x,t) = A\left[e^{i(kx-\omega t)}-e^{i(2kx-4\omega t)}\right][/tex]

So, the probability density is:

[tex]\left|\Psi(x,t)\right|^2 &= A^2 \left[e^{i(kx-\omega t)} - e^{-i(kx+\omega t)}\right]\left[e^{-i(kx+\omega t)} - e^{i(kx-\omega t)}\right]\&= A^2 \left[2 - 2\cos(2kx-4\omega t)\right][/tex]

Now, at t=0, the probability density reduces to:

[tex]\left|\Psi(x,0)\right|^2 = A^2 \left[2 - 2\cos(2kx)\right][/tex]

We want to find the two smallest positive values of x for which [tex]\left|\Psi(x,0)\right|^2[/tex] is the maximum. Since cos(2kx) varies between -1 and 1, [tex]\left|\Psi(x,0)\right|^2[/tex] varies between 0 and [tex]4A^2[/tex].

To find the maximum values of [tex]\left|\Psi(x,0)\right|^2[/tex], we need to find the values of x where cos(2kx) takes its minimum values. The minimum value of cos(2kx) is -1, which occurs when 2kx = (2n+1)π, where n is an integer.

Thus, the two smallest positive values of x for which [tex]\left|\Psi(x,0)\right|^2[/tex] is maximum are given by:

2kx = π and 2kx = 3π

So, the values of x are:

x = π/2k and x = 3π/2k

To learn more about probability

https://brainly.com/question/30034780

#SPJ4

A standing wave with two antinodes on a vibrating string represents the 1st overtone, which is also known as the 2nd harmonic. The wavelength is 148 cm. The 2nd harmonic already has two antinodes, so for the 3rd, 4th, and 5th harmonics, there will be 3, 4, and 5 antinodes, respectively.

(a) A standing wave with two antinodes on a vibrating string represents the 1st overtone, which is also known as the 2nd harmonic.
(b) To determine the wavelength of this wave, first, recall that the length of the string is half of the wavelength for the 2nd harmonic. So, we can use the following formula:
Length of the string = Wavelength / 2
Now, plug in the given values:
74 cm = Wavelength / 2
To find the wavelength, multiply both sides by 2:
Wavelength = 74 cm × 2 = 148 cm
(c) If the tension in the string is 20.0 N, first, we need to find the fundamental frequency. In a standing wave pattern with 1 antinode (1st harmonic), the length of the string is equal to half of the wavelength. So, the wavelength of the fundamental frequency is:
Wavelength (1st harmonic) = 2 ×  Length of the string = 2 ×  74 cm = 148 cm
To find the next three frequencies that could cause standing wave patterns on the string, we will look at the 3rd, 4th, and 5th harmonics. For each harmonic, the number of nodes increases by 1. The 2nd harmonic already has two antinodes, so for the 3rd, 4th, and 5th harmonics, there will be 3, 4, and 5 antinodes, respectively.

Learn more about antinodes here:-

https://brainly.com/question/30640087

#SPJ11

The angular acceleration of the pulley is approximately [tex]39.22 rad/s^2[/tex].

What does the term "angular acceleration" mean?

The angular acceleration, which is frequently denoted by the symbol and stated in radians per second per second, is the rate at which the angular velocity changes over time.

Here is the calculation:
The net force acting on the 2 kg object is the difference between the tension in the string and the frictional force. Using Newton's second law, we can write:
[tex]F_{net} = ma\\T - f_k = ma[/tex]
The moment of inertia of the pulley can be calculated using the formula for the moment of inertia of a disk:
[tex]I = (1/2)mr^2[/tex]
The torque due to the tension can be calculated as:
[tex]\tau_T = T*(r/2)[/tex]
The torque due to the frictional force can be calculated as:
[tex]\tau_f = f_k*(r/2)[/tex]
The net torque can be calculated as the difference between the torque due to the tension and the torque due to the frictional force:
[tex]\tau_{net} = \tau_T - \tau_f[/tex]
Finally, the angular acceleration can be calculated using Newton's second law for rotational motion:
[tex]\tau_{net} = I*\alpha[/tex]
Substituting the values and solving for α, we get:
[tex]\alpha = (T - f_k)/(1/2mr^2) = (2/3)g(\mu_k - sin\theta)[/tex]
where g is the acceleration due to gravity, [tex]\mu_k[/tex] is the coefficient of kinetic friction, and θ is the angle of the incline.
Using the given values, we get:
[tex]\alpha = (2/3)9.81(0.40 - sin(30)) = 39.22 rad/s^2[/tex]
Therefore, the angular acceleration of the pulley is approximately [tex]39.22 rad/s^2[/tex].

To learn more about angular acceleration use:

https://brainly.com/question/13014974

#SPJ4

The true velocity of the wind is approximately 43.10 km/h.

To find the true velocity of the wind when a motorcyclist is traveling due north at 50 km/h, and the wind appears to come from the northwest at 60 km/h, we can use vector addition.

Step 1: Break the wind's apparent velocity into its north and west components. Since the wind is coming from the northwest, the north and west components will be equal.

Using the Pythagorean theorem (a² + b² = c²) to find the components:

North component:

a = 60 * cos(45°)

  = 60 * 0.707

   = 42.43 km/h

West component:

b = 60 * sin(45°)

  = 60 * 0.707

  = 42.43 km/h

Step 2: Subtract the motorcyclist's northward velocity from the north component of the wind's apparent velocity:

True north component of the wind:

42.43 - 50 = -7.57 km/h (southward)

Step 3: Combine the true north and west components of the wind's velocity using the Pythagorean theorem:

True wind velocity = √((-7.57)² + (42.43)²)

                               = √(57.36 + 1800.06)

                                = √1857.42

                                ≈ 43.10 km/h

The true velocity of the wind is approximately 43.10 km/h.

To know more about velocity refer here

brainly.com/question/17127206#

#SPJ11

The mechanical energy of the system decreases by 12% (152.70 J/751.98 J x 100%) when the ball reaches its destination. Therefore, the correct answer is C. Decreases by 12%.

What is Energy?

Energy is a fundamental physical quantity that describes the ability of a system to do work. In other words, energy is the capacity of a system to produce changes in itself or in its environment. It is a scalar quantity, which means that it is characterized only by its magnitude and not by its direction.

When the ball reaches the bottom of the incline, it will have a velocity v given by v = [tex]\sqrt{2gh}[/tex], where h is the height of the incline. Substituting the values, we get v = [tex]\sqrt{29.817.66}[/tex] = 10.99 m/s.

The final kinetic energy of the ball is given by (1/2)m[tex]v^{2}[/tex] = (1/2)[tex]1010.99^{2}[/tex] = 599.28 J.

The final potential energy of the ball is 0, since it is at ground level. Therefore, the total mechanical energy of the system at the bottom of the incline is the sum of the final kinetic and potential energies, which is 599.28 J.

The initial mechanical energy of the system is the potential energy of the ball at the top of the incline, which is 751.98 J.

Therefore, the change in mechanical energy is:

Delta E = 599.28 - 751.98 = -152.70 J

To know more about Energy visit;

https://brainly.com/question/8101588

#SPJ4

The weight of the astronaut 6.37 × 106 meters above the surface of the Earth would be 160 N.

The weight of an object depends on its mass and the gravitational field it is in. Near the surface of the Earth, the acceleration due to gravity is approximately 9.81 m/s².

We can use the formula F = mg to calculate the weight of the astronaut at the surface of the Earth:

The gravitational field weakens as the distance from the center of the Earth increases, thus, we can use the formula for gravitational acceleration at a distance r from the center of the Earth:

Now we can calculate the weight of the astronaut at this height:

We don't know the mass of the astronaut, but we can use the weight at the surface of the Earth to find it:

         = 8.00 × 102 N / 9.81 m/s²

        = 81.63 kg

F' = (81.63 kg) x (1.96 m/s²)

F' = 160 N

Therefore, the weight of the astronaut 6.37 × 106 meters above the surface of the Earth is approximately 160 N.

More on the weight of Astronauts can be found here: https://brainly.com/question/11244838

#SPJ1

The ball takes about 3.06 seconds to reach the top of its path.

When a ball is thrown or hit straight up, it will reach its maximum height at the point where its vertical velocity becomes zero.

At this point, the ball's acceleration will be equal to the acceleration due to gravity, which is -9.8 m/s².

Using the equation of motion for an object with constant acceleration, we can find the time it takes for the ball to reach the top of its path:

vf = vi + at

where vf is the final velocity (which is zero when the ball reaches its maximum height), vi is the initial velocity (30 m/s), a is the acceleration (-9.8 m/s²), and t is the time we're looking for.

Rearranging the equation, we get:

t = (vf - vi) / a

Since the final velocity is zero, we have:

t = -vi / a

Substituting the values, we get:

t = -30 m/s / (-9.8 m/s²)

t = 3.06 seconds

To know more about equation of motion refer here

https://brainly.com/question/15080570#

#SPJ11

An example of bad publicity as it pertains to OB (organizational behavior) is "a negative article about the offense" The correct option is (b).

This can be damaging to the company's reputation and can lead to a loss of trust from customers, stakeholders, and employees. Negative publicity can have a significant impact on the company's bottom line as well as its ability to attract and retain talent.

Additionally, the cost of lost wages can also be an example of bad publicity as it can reflect poorly on the company's compensation and benefits practices. This can lead to low morale and high turnover rates, which can ultimately harm the company's performance.

In order to mitigate the effects of bad publicity, companies should prioritize communication, transparency, and accountability. They should also be proactive in addressing negative feedback and taking steps to improve their organizational culture and practices. By doing so, they can help to rebuild trust and maintain a positive reputation in the eyes of their stakeholders.

Therefore, the correct answer is an option B.

For more such questions on OB:

https://brainly.com/question/30459176

#SPJ11

The tangential speed of a point on the Ferris wheel is approximately 2.01 m/s.  the magnitude of the centripetal acceleration of a point on the Ferris wheel is approximately 0.106 m/s².

The tangential speed of a point on the Ferris wheel is given by the formula:

v = (2πr) / T

where v is the tangential speed, r is the radius of the Ferris wheel (half the diameter), and T is the time taken to complete one revolution.

In this case, the diameter of the Ferris wheel is 76 m, so its radius is 38 m. It completes one revolution every 20 min, so the time taken is T = 20 min = 1200 s. Substituting these values in the formula, we get:

v = (2π × 38 m) / 1200 s

≈ 2.01 m/s

The centripetal acceleration of a point on the Ferris wheel is given by the formula:

a = v² / r

where a is the magnitude of the centripetal acceleration, v is the tangential speed, and r is the radius of the Ferris wheel.

In this case, we have already calculated the tangential speed to be approximately 2.01 m/s, and the radius of the Ferris wheel is 38 m. Substituting these values in the formula, we get:

a = (2.01 m/s)² / 38 m

≈ 0.106 m/s²

To know more about Ferris wheel, here

https://brainly.com/question/16396069

#SPJ4

Answer:

placing an object between two free ends of a wire in a circuit. the circuit must have a bulb, wires, crocodile clips and a switch (optional) .

Explanation:

get a material between the clips . if the bulb lights up, the object is a conductor and is it doesn't its an insulator.

This scenario represents a simple harmonic motion with a specific period, frequency, maximum velocity and acceleration.

The given scenario describes a mass oscillating horizontally attached to an ideal spring with a spring constant of 85 N/m and an amplitude of 0.50 m. The ideal spring is assumed to have no mass, damping or friction, and therefore it is a simple harmonic oscillator.

The period of oscillation is calculated as T = 2π√(m/k)

where m is the mass and k is the spring constant.

Substituting the given values, we get T = 2π√(1.5/85) = 0.449 s.

The frequency of oscillation is f = 1/T = 2.23 Hz.

The maximum velocity of the mass can be found using the equation vmax = Aω,

where A is the amplitude and ω is the angular frequency.

Substituting the given values, we get vmax = 0.50 × √(k/m) = 0.50 × √(85/1.5) = 5.06 m/s.

The maximum acceleration of the mass can be found using the equation amax = Aω^2 = 0.50 × (2πf)^2 = 7.96 m/s^2.

For more about frequency:

https://brainly.com/question/29739263

#SPJ11

The time period between the lightning and thunder is 10.09 seconds.

The velocity of sound in the tube was 1009.2 m/s

The time period between the lightning and thunder can be calculated using the equation: distance = speed × time. Since we know the distance (3.50 km) and the speed of sound at 30.0 °C (347.2 m/s), we can rearrange the equation to solve for time: time = distance / speed. Plugging in the numbers, we get: time = 3.50 km / 347.2 m/s = 10.09 seconds.

The velocity of sound in the tube can be calculated using the formula: velocity = frequency × wavelength. The wavelength can be found by doubling the distance between two consecutive nodes or crests. In this case, the wavelength is 2 × 56.5 cm = 113 cm = 1.13 m. Plugging in the frequency (894 Hz) and the wavelength (1.13 m), we get: velocity = 894 Hz × 1.13 m = 1009.2 m/s. Since the velocity is closest to the standard velocity of Helium (1007 m/s), we can conclude that Helium was in the tube.

To know more about the Lightning, here

https://brainly.com/question/15412090

#SPJ4

The intensity transmission coefficient TI and reflection coefficient RI for the following interfaces: muscle/kidney, air/ muscle, and bone/ muscle. assuming that the ultrasound incidence beam makes an angle of 30 degree, θ' = 9.9 degrees, TI = 0.00061, RI = 0.99939.

To calculate the intensity transmission coefficient (TI) and reflection coefficient (RI) for each interface, we need to use the following equations:

TI = (2Z1cosθ)/(Z1cosθ + Z2cosθ')
RI = (Z2cosθ - Z1cosθ')/(Z2cosθ + Z1cosθ')
where Z1 and Z2 are the acoustic impedance of the two materials at the interface, θ is the angle of incidence (which is given as 30 degrees in this case), and θ' is the angle of transmission.
We can find the acoustic impedance for each material using the equation:
Z = ρc
where ρ is the density of the material and c is the speed of sound in that material. The values for ρ and c are typically given in tables or can be looked up online.
Using these equations, we can calculate the TI and RI for each interface:

Muscle/kidney interface:

- Z1 (muscle) = 1.64 x 10^6 kg/m²s
- Z2 (kidney) = 1.48 x 10^6 kg/m²s
- θ = 30 degrees

Using the equations above, we can find:

- θ' = 19.6 degrees
- TI = 0.71
- RI = 0.29

Air/muscle interface:

- Z1 (air) = 4 x 10^2 kg/m^2s
- Z2 (muscle) = 1.64 x 10^6 kg/m^2s
- θ = 30 degrees

Using the equations above, we can find:

- θ' = 1.9 degrees
- TI = 0.99999
- RI = 0.00001

Bone/muscle interface:

- Z1 (bone) = 7.8 x 10^6 kg/m^2s
- Z2 (muscle) = 1.64 x 10^6 kg/m^2s
- θ = 30 degrees

Using the equations above, we can find:

- θ' = 9.9 degrees
- TI = 0.00061
- RI = 0.99939

Learn more about intensity transmission coefficient here:-

https://brainly.com/question/17136252

#SPJ11

Changes in mass, distance, and gravity affect the force of gravity and orbital speed; the force of gravity is directly related to the size (mass) and distance between objects.

Changes in mass and distance affect the force of gravity and orbital speed: increasing mass or decreasing distance increases the force of gravity and orbital speed, while decreasing mass or increasing distance decreases them. The force of gravity is directly proportional to the product of the masses and inversely proportional to the square of the distance between them. The two factors that affect the force of gravity are the size (mass) and distance between the objects.

To know more about gravity, here

brainly.com/question/13224265

#SPJ4

--The complete question is, What are the effects of changes in mass, distance, and gravity on the force of gravity and orbital speed? What is the relationship between the force of gravity and the size and distance of the objects?--

The Ares 4 MAV (Mars Ascent Vehicle) has been designed to be as light as possible to make it easier to get into a high Martian orbit.

The main body of the vehicle is constructed out of lightweight materials such as aluminium and titanium. This helps reduce the overall weight of the MAV, making it easier to launch into orbit.

Additionally, the MAV is powered by an advanced propulsion system that is designed to provide maximum efficiency with minimal fuel use. This ensures that the MAV is able to reach its destination with minimal fuel, helping to keep the weight of the craft to a minimum.

Finally, the MAV is equipped with a range of advanced navigation and guidance systems that help to keep the craft on its desired trajectory.

These systems help to ensure the MAV is able to reach its destination with minimal fuel, keeping the craft light and helping it to reach its desired orbit.

Know more about Craft light here

https://brainly.com/question/31200758#

#SPJ11

Answer:

.92 T

Explanation:

This is just a plug-and-chug question.

Here is the formula: B = uni

u = vacuum permeability = 4pi * 10^-7 this is a given constant

n = turns per meter = 1040/ (4.4*10^-2)

i = current = 31 A also given by the problem

so B = .92 T

The unit of the magnetic field is Tesla ("T")