A cylinder of Krypton has contains 17 L of Ar at 22. 8 atm and 112 degrees celsisus. How many moles are in the cylinder?​

The molarity is 0.37 M

The molality is 1.71 m

Molarity is a unit of concentration used to measure the amount of a solute in a solution. It is defined as the number of moles of solute dissolved per liter of solution (mol/L). In other words, molarity tells us how many moles of solute are present in each liter of solution.

The formula for calculating molarity is:

Molarity (M) = moles of solute ÷ volume of solution in liters

Molarity = 100g/180 g/mol * 1/1.5 L

= 0.37 M,

Molality = 200g/58.5g/mol * 1/2 Kg

1.71 m

Learn more about molarity:https://brainly.com/question/8732513

#SPJ1

I. Q = mct; c is the specific heat capacity, II. Q = ml vapor; l vapor is the latent heat of vaporization,III. Q = ml fusion; l fusion is the latent heat of fusion.

Vaporization is the process of a substance changing from its liquid form to its gaseous form. It occurs when the substance absorbs heat, causing its molecules to move faster and further apart, converting it from a liquid to a gas. Vaporization is a process that occurs when a liquid is heated to its boiling point and then cooled, causing the molecules to break apart and form a vapor. Vaporization can also occur when a solid is heated until it sublimates, or when the molecules of the solid are broken down into a gas. Vaporization is an important part of the water cycle, and it is also used in many industries, such as chemical production, pharmaceutical manufacturing, and food processing.

To learn more about vaporization

https://brainly.com/question/26306578

#SPJ4

(a) The pH of the nitric acid solution is approximately 0.28.

(b) The pOH of the nitric acid solution is approximately 13.72

(c) The hydroxide ion concentration of the nitric acid solution is approximately 1.89 x 10^-14 M.

a. To calculate the pH of the solution, we can use the formula:

pH = -log[H3O+]

where;

Substituting the given value:

pH = -log(0.53) ≈ 0.28

b. The pOH of the solution can be calculated using the formula:

pOH = -log[OH-]

where;

To find the pOH, we need to first calculate the [OH-]. We know that:

Kw = [H3O+][OH-] = 1.0 x 10^-14

where;

Rearranging the equation, we can solve for [OH-]:

[OH-] = Kw / [H3O+]

[OH-] = 1.0 x 10^-14 / 0.53

[OH-] ≈ 1.89 x 10^-14

Now, we can calculate the pOH:

pOH = -log(1.89 x 10^-14) ≈ 13.72

c. We can use the [OH-] concentration calculated in part (b) to find the hydroxide ion concentration:

[OH-] = 1.89 x 10^-14

Learn more about pH here: https://brainly.com/question/26424076

#SPJ1

Red tape is used to repair a broken red taillight of a car as it is transparent to red light, reflects and absorbs other colors of light.

When white light (which is made up of different colors of light) hits the red tape, it absorbs all colors except for red, which is transmitted through the tape.

This is due to the selective absorption property of the tape, which means that it absorbs certain colors of light while allowing others to pass through. Additionally, the tape also reflects red light, which allows it to mimic the original color of the taillight and appear red when viewed from behind.

This property of selective absorption and reflection makes red tape a suitable material for repairing a broken red taillight of a car.

To know more about Red tape refer to-

https://brainly.com/question/28601882

#SPJ11

The molar solubility of [tex]Ba_3(PO_4)_2[/tex]  is [tex]6.1 * 10^{-10} M[/tex].

The molar solubility  [tex]Ba_3(PO_4)_2[/tex] can be calculated using the solubility product constant (Ksp) expression:

[tex]Ksp = [Ba_2+ ]^3[PO_{43-} ]^2[/tex]

where [tex][Ba_2+][/tex] and [tex][PO_{43-}][/tex] are the molar concentrations of barium ions and phosphate ions in the saturated solution, respectively.

To find the molar solubility, we assume that x moles of [tex]Ba_3(PO_4)_2[/tex]dissolved in 1 liter of water give 3x moles of [tex]Ba_2[/tex]+ and 2x moles of [tex]PO_{43}[/tex]-. Substituting these values into the Ksp expression, we have:

Ksp = [tex](3x)^3(2x)^2 = 1.3*10^{-29}[/tex]

Solving for x, we get:

x =[tex]6.1 * 10^{-10} M[/tex]

This means that at equilibrium, the concentration of barium ions is three times this value, or [tex]1.8*10^{-9} M[/tex], and the concentration of phosphate ions is twice this value or [tex]1.2 * 10^{-9}[/tex] M.

To know more about molar solubility, here

brainly.com/question/28170449

#SPJ1

Explanation:

To calculate the heat absorbed by the iron, we can use the formula:

Q = m * c * ΔT

where Q is the heat absorbed, m is the mass of the iron, c is the specific heat of iron, and ΔT is the change in temperature.

Given:

Mass of iron (m) = 14.1 g

Specific heat of iron (c) = 0.450 J/gºC

Change in temperature (ΔT) = 32.9ºC - 20ºC = 12.9ºC

Substituting these values into the formula, we get:

Q = 14.1 g * 0.450 J/gºC * 12.9ºC

Q = 81.47 J

Therefore, the iron absorbed 81.47 J of heat.

There are 0.0025 moles of hydrogen ions present in the flask and the expression that shows how to find it is : moles H+ = Molarity × Volume in liters

The expression to find the moles of hydrogen ions present in the flask is:

moles H+ = Molarity × Volume in liters

First, we need to convert the volume of the solution from milliliters to liters:

Volume = 25.00 mL = 25.00 ÷ 1000 L = 0.02500 L

Substituting the given values into the expression, we get:

moles H+ = 0.10 M × 0.02500 L = 0.002500 mol

Therefore, there are 0.0025 moles of hydrogen ions present in the flask.

To know more about hydrogen ions, here

brainly.com/question/14736709

#SPJ4

A)  The value of concentration [OH⁻] = √(Kb*[CO₃²⁻]) = √(1.8×10⁻⁴*0.145) = 0.0034 M.

B)  The pH of the solution is pH = -log[H⁺] = -log(2.24×10⁻¹²) = 11.65.

C)  The pOH of the solution is pOH = -log(0.0034) = 2.47.

A) To determine the [OH⁻] of a solution that is 0.145 M in CO₃²⁻ (Kb=1.8×10⁻⁴), we can use the Kb expression of CO₃²⁻ and the fact that Kw (the ion product constant) is equal to [H⁺][OH⁻] to solve for [OH⁻].

The Kb expression for CO₃²⁻ is: Kb = [HCO₃⁻][OH⁻]/[CO₃²⁻]. Since the concentration of HCO₃⁻ is negligible compared to the concentration of CO₃²⁻, we can assume that [HCO₃⁻] is equal to 0.

B) To determine the pH of a solution that is 0.145 M in CO₃²⁻, we need to find the concentration of H⁺ in the solution. Since CO₃²⁻ can act as a base, it can react with water to form HCO₃⁻ and OH⁻.

The Kb expression for CO₃²⁻ can be rewritten as: Kw/Kb = [H⁺][OH⁻]/[CO₃²⁻] = [H⁺][OH⁻]/0.145. Solving for [H⁺], we get [H⁺] = Kw/[OH⁻][CO₃²⁻] = 1.0×10⁻¹⁴/(0.0034*0.145) = 2.24×10⁻¹² M.

C) To determine the pOH of a solution that is 0.145 M in CO₃²⁻, we can use the fact that pOH = -log[OH⁻]. From part A, we know that the [OH⁻] of the solution is 0.0034 M.

To know more about ion product constant click on below link:

https://brainly.com/question/9876097#

#SPJ11

We need 4.68 grams of ammonium chloride to prepare 0.250 L of a 0.35 M solution.

To determine the mass of ammonium chloride needed to prepare a 0.35 M solution in 0.250 L of solution, we can use the formula:

moles of solute = concentration x volume

We can rearrange this formula to solve for the mass of solute needed:

mass of solute = moles of solute x molar mass of solute

First, we need to calculate the number of moles of ammonium chloride needed for this solution:

moles of NH4Cl = concentration x volume

moles of NH4Cl = 0.35 mol/L x 0.250 L

moles of NH4Cl = 0.0875 mol

Next, we need to calculate the molar mass of ammonium chloride:

Molar mass of NH4Cl = 14.01 g/mol (mass of N) + 4(1.01 g/mol) (mass of H) + 35.45 g/mol (mass of Cl)

Molar mass of NH4Cl = 53.49 g/mol

Finally, we can calculate the mass of ammonium chloride needed:

mass of NH4Cl = moles of NH4Cl x molar mass of NH4Cl

mass of NH4Cl = 0.0875 mol x 53.49 g/mol

mass of NH4Cl = 4.68 g

to know more about ammonium chloride refer here:

https://brainly.com/question/23387600#

#SPJ11

70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg The temperature of the CO2 in °C is 4.231.1.

A thermometer is a device that quantitatively measures a system's temperature. The word "temperature" refers to the average kinetic energy of an object, which is a type of energy associated with motion and used to define how hot or cold an object is.

Volume = 25.12 L. Pressure= 968 mm Hg.

Number of moles = 70 moles.

P = nRT/V

968 = 70 * T * 0.0821 / 25.12 L

968* 25.12/ 70 * 0.0821 = T

24316.16/ 5.747 = T

4.231.1 = T

Therefore, 70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg The temperature of the CO2 in °C is 4.231.1. The temperature of the CO2 in °C is 4.231.1

To Learn more about Temperature, refer to the link:

https://brainly.com/question/7510619

#SPJ6

We can start by balancing the chemical equation:

3 Ca + Au2(SO4)3 → 3 CaSO4 + 2 Au

The equation shows that 2 moles of gold atoms are produced for every 1 mole of Au2(SO4)3 that reacts. We can use Avogadro's number to convert the number of atoms of gold to moles:

4.6 x 10^22 atoms of gold / 6.022 x 10^23 atoms/mol = 0.0764 moles of gold

Therefore, we know that 0.0764 moles of Au2(SO4)3 reacted in the equation. To find the mass of Au2(SO4)3, we can use its molar mass:

Au2(SO4)3 molar mass = (2 x 196.97 g/mol) + (3 x 96.06 g/mol) + (12 x 16.00 g/mol) = 842.09 g/mol

Finally, we can use the following conversion factor to calculate the mass of Au2(SO4)3:

0.0764 moles of Au2(SO4)3 x 842.09 g/mol = 64.3 g of Au2(SO4)3

Therefore, approximately 64.3 grams of Au2(SO4)3 were reacted to produce 4.6 x 10^22 atoms of gold.

To know more about chemical refer here

https://brainly.com/question/29237397#

#SPJ11

Number of moles required to completely react with 107mL of 6.00 M H₂SO₄ is 0.428.

To determine the number of moles of aluminum (Al) needed to completely react with 107 mL of 6.00 M H₂SO₄, we first need to find the moles of H₂SO₄ in the given volume. Use the molarity formula:

moles = molarity × volume (in liters)

moles of H₂SO₄ = 6.00 M × (107 mL × 1 L / 1000 mL) = 0.642 moles H₂SO₄

Now, use the stoichiometry from the balanced chemical equation:

2 moles Al react with 3 moles H₂SO₄

To find moles of Al needed, set up a proportion:

(2 moles Al / 3 moles H₂SO₄) = (x moles Al / 0.642 moles H₂SO₄)

Solve for x:

x moles Al = (2 moles Al / 3 moles H₂SO₄) × 0.642 moles H₂SO₄ = 0.428 moles Al

So, 0.428 moles of aluminum are required to completely react with 107 mL of 6.00 M H₂SO₄.

Know more about Molarity here:

https://brainly.com/question/8732513

#SPJ11

Latitude affect climate because the closer to the equator, the warmer it gets. The correct answer is B.

The temperature rises as one goes nearer to the equator. One of the key elements that influences climate is latitude. The amount of solar radiation received per unit area rises as you get towards the equator. This raises the temperature and increases evaporation, which causes an increase in precipitation. As a result, the equator's vicinity is typically characterized by a tropical or subtropical climate, marked by warm temperatures and high humidity.

The amount of solar energy received per unit area drops as you move further from the equator, resulting in colder temperatures and less evaporation, which in turn causes less precipitation. As a result, the climate is often colder, with lower temperatures and less humidity, in regions close to the poles.

Learn more on the equator here https://brainly.com/question/1264608

#SPJ1

We need 39.9 grams of sodium sulfate to prepare 750 mL of a 0.375 M solution.

Volume of the solution = 750 mL = 0.750 L
We know that, moles of solute = molarity × volume of solution (in L)

moles of sodium sulfate = 0.375 M × 0.750 L = 0.281 mol
Molar mass of sodium sulfate ([tex]Na_{2}SO_{4}[/tex])= (2 × 22.99 g/mol) + (4 × 16.00 g/mol) + (32.07 g/mol) = 142.04 g/mol
Therefore, grams of [tex]Na_{2}SO_{4}[/tex] = moles of [tex]Na_{2}SO_{4}[/tex] × molar mass of [tex]Na_{2}SO_{4}[/tex] = 0.281 mol × 142.04 g/mol = 39.9 g

We need 39.9 grams of sodium sulfate to prepare 750 mL of a 0.375 M solution.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

The rate enhancement that could be accomplished by the enzyme forming one low barrier hydrogen bond with transition state at 25 °C is 10⁷.

The decrease is about 5.7 kJ/mol that is observed in the free energy of the activation of the reaction when the 10 fold increase will occurs in the rate of the reaction at 25ºC.

The hydrogen bond  free energy = 40 kJ/mol.

Now, for the hydrogen bond, the times of the  10 fold increase

= (40 kJ/mol) / (5.7 kJ/mol)

= 7 times.

Hence, the rate that show the 10 fold increase 7 times. Therefore, the enhancement in the rate will be 10⁷.

To learn more about rate here

https://brainly.com/question/31260701

#SPJ4

This question is incomplete, the complete question is :

calculate the rate enhancement that could be accomplished by an enzyme forming one low barrier hydrogen bond with transition state at 25 °C.

Hi! The heat energy will flow from the 98.5°C metal bolt to the 23.1°C water in the calorimeter.

This is because heat always flows from a higher temperature object to a lower temperature object until thermal equilibrium is reached.

This principle is known as the second law of thermodynamics or the law of heat transfer. It describes the natural tendency for heat to move from regions of higher temperature to regions of lower temperature.

Heat transfer occurs through three main mechanisms: conduction, convection, and radiation.

In the given scenario, conduction is the primary mechanism of heat transfer. When the hot metal bolt comes into contact with the water in the calorimeter, the thermal energy from the bolt is transferred to the water molecules in direct contact with it.

The water molecules gain kinetic energy and begin to vibrate more rapidly, thereby increasing their temperature. As a result, the metal bolt loses thermal energy, and its temperature decreases.

This transfer of heat will continue until the metal bolt and water reach thermal equilibrium, where both objects have the same temperature. At this point, the heat flow between them will cease, as there is no longer a temperature difference to drive the transfer of thermal energy.

To learn more about heat, refer below:

https://brainly.com/question/1429452

#SPJ11

The limiting reactant in the chemical reaction is O₂ because because the O₂ contains the higher starting mass. The correct option is D.

The chemical equation is as :

2H₂ + O₂  --->  2H₂O

The mass of the H₂  = 0.4 g

The molar mass of the H₂  = 2 g/mol

The moles of the H₂  = mass / molar mass

The moles of the H₂  = 0.4 / 2

The moles of the H₂  = 0.2 mol

The mass of the O₂  = 1.8 g

The molar mass of the O₂  = 32 g/mol

The moles of the O₂  = mass / molar mass

The moles of the O₂  = 1.8 / 32

The moles of the O₂  = 0.056 mol

2 moles of H₂  react with 1 mol of O₂

0.056 mol of O₂ react with = 2 × 0.056 = 0.112 mol of H₂

The O₂ is the limiting reactant. The correct option is D.

To learn more about limiting reactant here

https://brainly.com/question/31897248

#SPJ1

Based on the scenario described, it is likely that the student spilled a solution containing a flammable compound such as ethanol or methanol. These compounds are commonly used in chemistry labs and can easily catch fire if not handled properly. The bright red color of the flames is likely due to the presence of a metal salt in the solution, which can produce colored flames when heated. It is important to always follow safety rules in a lab setting to prevent accidents like this from happening.

How does burn ethanol?

Ethanol can be burned in the presence of oxygen to produce carbon dioxide (CO2) and water (H2O) in a process known as combustion. The chemical formula for ethanol combustion is:

C2H5OH + 3O2 → 2CO2 + 3H2O

In this reaction, the ethanol (C2H5OH) reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). The reaction releases heat, which can be used as a source of energy.

To burn ethanol, it is typically mixed with air or oxygen and then ignited. The combustion process can be controlled by adjusting the amount of ethanol and oxygen that is mixed together, as well as the temperature and pressure of the reaction.

In some cases, ethanol is burned in internal combustion engines, such as those used in cars and other vehicles. In these engines, the combustion of ethanol is used to power the engine and generate mechanical energy.

It's important to note that the combustion of ethanol releases carbon dioxide, a greenhouse gas that contributes to climate change. As such, efforts are being made to reduce the amount of greenhouse gas emissions from burning ethanol and other fuels, through the use of renewable energy sources and more efficient combustion processes.

To know more about Ethanol:

https://brainly.com/question/25002448

#SPJ11

In the balanced equation for the reaction of Pb with N2, 3 moles of Pb would react with 2 moles of N2 to form 6 moles of Pb3N2. Since 1 mole of a substance is equal to 6.02x1023 particles, 3 moles of Pb would be equal to 1.81x1024 particles of Pb.

Similarly, 2 moles of N2 would be equal to 1.21x1024 particles of N2. When these two react to form Pb3N2, 6 moles of Pb3N2 would be formed, which is equal to 3.63x1024 particles of Pb3N2. Thus, if there are 3 moles of Pb, then there are 3.63x1024 particles of Pb3N2.

Molecules and atoms are the building blocks of all matter in the universe. A mole is a unit of measurement used to quantify the amount of a substance present in a given sample. It is defined as the amount of substance that contains the same number of particles as 12 grams of Carbon-12.

Moles are used to calculate the number of particles present in a given amount of a substance, as the number of particles in a mole of a substance is always the same. This allows us to easily calculate the number of particles present in any given amount of a substance.

In chemistry, the balanced equation of a reaction is used to calculate the amount of each reactant and product present in the reaction. Knowing the number of moles of each substance present in the reaction allows us to calculate the number of particles present in each substance as well.

Know more about Carbon-12 here

https://brainly.com/question/7666959#

#SPJ11

Protein is the main nutrient that helps in the repair of tissue. Protein provides the amino acids that the body needs to build and repair cells and tissues. Other nutrients that aid in tissue repair include carbohydrates, fats, vitamins, and minerals.

The mass of water present in the calorimeter was 110.6 g.

The heat released by the reaction of magnesium oxide with hydrochloric acid was absorbed by the water in the calorimeter, resulting in a change in the temperature of the water. Using the equation

Q = mcΔT

where Q is the heat released, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature, we can calculate the mass of water present:

Q = mcΔT

4860J = m x 4.18 J/g°C x (46.0°C - 25.0°C)

m = 4860J ÷ (4.18 J/g°C x 21.0°C)

m = 110.6 g

To learn more about mass follow the link:

brainly.com/question/15959704

#SPJ4

The new volume of the tire is 15.6 L if the temperature is increased from 22° C to 34°C if the previous volume was 15 L.

The relation between pressure and volume in a system is explained by Charles's Law. It states that the temperature is inversely proportional to the volume in the system. It is expressed as:

[tex]T_2V_1=T_1V_2[/tex]

where T is the temperature

V is the volume

with no change in pressure and a number of moles of gases.

Given in the question,

[tex]V_1[/tex] = 15 L

[tex]T_1[/tex] = 22°C = 295 K

[tex]T_2[/tex] = 34°C = 307 K

307 * 15 = 295 * [tex]V_2[/tex]

[tex]V_2[/tex] = 15.6 L

Learn more about Charle's Law:

https://brainly.com/question/16927784

#SPJ4

[tex]CS_2[/tex]  is the limiting reactant in the reaction.

The balanced chemical equation for the reaction is:

3 [tex]CS_2[/tex] + 6 [tex]NaOH[/tex] → 2 [tex]Na_2CS_3[/tex] + [tex]Na_2CS_3[/tex] + 3 [tex]H_2O[/tex]

To determine the limiting reactant, we need to calculate the amount of product that each reactant can produce and compare it to the actual amount of product that is formed.

First, we need to convert the mass of [tex]CS_2[/tex] to moles:

118.3 g [tex]CS_2[/tex] × (1 mol [tex]CS_2[/tex] /76.14 g [tex]CS_2[/tex]) = 1.555 mol [tex]CS_2[/tex]

Next, we need to calculate the amount of product that can be formed from 1.555 mol of [tex]CS_2[/tex]. According to the balanced equation, 3 mol of [tex]CS_2[/tex] will produce 2 mol of [tex]Na_2CS_3[/tex]. Therefore, 1.555 mol of [tex]CS_2[/tex] will produce:

(2/3) × 1.555 mol = 1.037 mol [tex]Na_2CS_3[/tex]

Now, let's calculate the amount of product that can be formed from 3.12 mol of [tex]NaOH[/tex]. According to the balanced equation, 6 mol of [tex]NaOH[/tex] will produce 2 mol of [tex]Na_2CS_3[/tex]. Therefore, 3.12 mol of [tex]NaOH[/tex] will produce:

(2/6) × 3.12 mol = 1.04 mol [tex]Na_2CS_3[/tex]

Comparing the amount of product that can be formed from each reactant, we see that 1.037 mol of [tex]Na_2CS_3[/tex] can be produced from the 1.555 mol of [tex]CS_2[/tex], while 1.04 mol of [tex]Na_2CS_3[/tex] can be produced from the 3.12 mol of [tex]NaOH[/tex]. Therefore, the limiting reactant in the reaction is [tex]CS_2[/tex].

For more such questions on reactant, click on:

https://brainly.com/question/29109077

#SPJ11

The molarity of the acid solution is 0.0425 M.

Titration is a common laboratory technique used to determine the concentration of a substance in a solution. In a titration, a known solution (titrant) is added gradually to an unknown solution until the reaction between the two is complete.

The point at which the reaction is complete is called the endpoint, and it is typically identified by an indicator that changes color.

To calculate the molarity of the unknown acid solution, we can use the following formula:

Molarity of acid solution = (Molarity of base solution) x (Volume of base solution) / (Volume of acid solution)

In this case, we know that 25.5 mL of a 0.1 M base solution was required to titrate 60 mL of the unknown acid solution. Using the formula above, we can plug in the values:

Molarity of acid solution = (0.1 M) x (25.5 mL) / (60 mL)
Molarity of acid solution = 0.0425 M

Therefore, the molarity of the acid solution is 0.0425 M.

To know more about acid solution, visit:

https://brainly.com/question/13208021#

#SPJ11

The candy provides 4.04 nutritional calories per gram.

The researcher used a bomb calorimeter to determine the nutritional value of the candy. The nutritional value refers to the amount of energy that a food provides to the body when it is consumed. This energy is typically measured in calories, which are a unit of energy.

To determine the nutritional value of the candy, the researcher placed a 3.60 g sample of the candy in the bomb calorimeter and combusted it in excess oxygen. The observed temperature increase was 2.07 ∘C, and the heat capacity of the calorimeter was 29.40 kj⋅k−1.

Using these values, the researcher can calculate the number of nutritional calories per gram of the candy.

To do this, the researcher needs to use the following equation:

q = C × ΔT

where q is the heat released by the combustion of the candy, C is the heat capacity of the calorimeter, and ΔT is the observed temperature increase. By rearranging this equation, the researcher can solve for the heat released by the combustion:

q = C × ΔT
q = (29.40 kj⋅k−1) × (2.07 ∘C)
q = 60.93 kJ

To convert this value to nutritional calories per gram of the candy, the researcher needs to divide by the mass of the candy:

60.93 kJ / 3.60 g = 16.92 kJ/g

Finally, the researcher can convert this value to nutritional calories by dividing by 4.184 (the conversion factor between kJ and nutritional calories):

16.92 kJ/g / 4.184 = 4.04 nutritional calories per gram of the candy.

Therefore, the candy provides 4.04 nutritional calories per gram.

To know more about nutritional calories, visit:

https://brainly.com/question/2713545#

#SPJ11

So, it will take 2.5 seconds for the same amount of hydrogen gas to effuse under the same conditions. Your answer is (B) 2.5 s.

Graham's Law states that the rate of effusion of two gases is inversely proportional to the square root of their molar masses:

rate1 / rate2 = √([tex]\frac{M_{2} }{M_{1} }[/tex])

Here, rate1 is the rate of effusion for oxygen, and rate2 is the rate of effusion for hydrogen. [tex]M_{1}[/tex] and [tex]M_{2}[/tex] are the molar masses of oxygen and hydrogen, respectively.

Given that 5 mol of oxygen gas effuses in 10 seconds, the rate1 is 0.5 mol/s.

The molar mass of oxygen is 32 g/mol, and the molar mass of hydrogen (H2) is 2 g/mol.

Now we can plug in the values:
0.5 / rate2 = √(2 / 32)
rate2 = 0.5 / √(2 / 32) ≈ 2 mol/s

time = 5 mol / 2 mol/s = 2.5 s

So, it will take 2.5 seconds for the same amount of hydrogen gas to effuse under the same conditions. Your answer is (B) 2.5 s.

To know more about effusion visit:

https://brainly.com/question/31444163

#SPJ11

the molar solubility of lead phosphate in a 0.202 M sodium phosphate solution is approximately 1.27 × 10^-7 M.

To calculate the molar solubility of lead phosphate in a sodium phosphate solution, we need to use the solubility product constant (Ksp) of lead phosphate and the common ion effect of sodium phosphate.

The balanced equation for the dissolution of lead phosphate (Pb3(PO4)2) is:

Pb3(PO4)2(s) ⇌ 3Pb2+(aq) + 2PO42-(aq)

The Ksp expression for lead phosphate is:

Ksp = [Pb2+]^3[PO42-]^2

The balanced equation for the dissociation of sodium phosphate (Na3PO4) is:

Na3PO4(s) ⇌ 3Na+(aq) + PO42-(aq)

In a 0.202 M sodium phosphate solution, the concentration of the PO42- ion is [PO42-] = 3 × 0.202 M = 0.606 M, due to the dissociation of sodium phosphate.

To calculate the molar solubility of lead phosphate, we can assume that x mol/L of Pb3(PO4)2 dissolves and forms 3x mol/L of Pb2+ and 2x mol/L of PO42-. Using the Ksp expression and the common ion effect, we can write:

Ksp = [Pb2+]^3[PO42-]^2
Ksp = (3x)^3(2x)^2 = 108x^5

Since the concentration of PO42- is 0.606 M, the concentration of Pb2+ is also 3x = 3(0.202 M - x). Substituting this into the Ksp expression gives:

Ksp = (3x)^3(2x)^2 = 108x^5
4.8 × 10^-27 = (3(0.202 - x))^3(2x)^2

Solving for x, we get:

x = 1.27 × 10^-7 M

Therefore, the molar solubility of lead phosphate in a 0.202 M sodium phosphate solution is approximately 1.27 × 10^-7 M.
Visit to know more about molar solubility:-

https://brainly.com/question/28202068

#SPJ11

Four reasonable resonance structures for the [tex]PO_3F^2^-[/tex] are:

Structure 1:
O- P(=O)-O- F

Structure 2:
O- P(-O•)-O•- F

Structure 3:
O•- P(-O)-O- F,

Structure 4:
O•- P(-O•)-O•- F

The [tex]PO_3F^2^-[/tex] ion has four reasonable resonance structures, which are shown below:

Structure 1:
O- P(=O)-O- F, with formal charges of +1 on the P atom, -1 on the F atom, and -1 on each of the two terminal O atoms.

Structure 2:
O- P(-O•)-O•- F, with formal charges of 0 on the P atom, -1 on the F atom, and -1 on each of the two terminal O atoms.

Structure 3:
O•- P(-O)-O- F, with formal charges of -1 on the P atom, -1 on the F atom, and 0 on each of the two terminal O atoms.

Structure 4:
O•- P(-O•)-O•- F, with formal charges of -2 on the P atom, -1 on the F atom, and 0 on each of the two terminal O atoms.

To draw four reasonable resonance structures for the [tex]PO_3F^2^-[/tex] ion, consider that the central phosphorus (P) atom is bonded to the three oxygen (O) atoms and to the fluorine (F) atom. Here are the four resonance structures with formal charges:

1. P is double bonded to one O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.

2. P is double bonded to the second O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.

3. P is double bonded to the third O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.

4. P is single bonded to all three O atoms and single bonded to F. One O atom has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of -1.

These four resonance structures show the distribution of electrons and formal charges for the [tex]PO_3F^2^-[/tex] ion, illustrating its resonance stabilization.

For more question on resonance structures

https://brainly.com/question/419650

#SPJ11

The property that allows filter paper to carry out its function is known as porosity.

Porosity refers to the measure of empty space within a material, and in the case of filter paper, it allows liquids to pass through while trapping solid particles or impurities. This property is essential for filter paper to effectively perform its function in separating solids from liquids.

Filter paper is typically made from cellulose fibers that are tightly woven together to create a dense and permeable material. The porosity of the filter paper depends on the size and shape of the pores within the material.

The smaller the pore size, the finer the filtration that can be achieved, while larger pore sizes allow for faster flow rates but may not effectively trap smaller particles.

In summary, the porosity property of filter paper is what enables it to separate solid particles from liquids by allowing the liquid to pass through while trapping the particles.

To know more about porosity, visit:

https://brainly.com/question/29311544#

#SPJ11

Tagatose and Leloir pathways are two different metabolic pathways involved in the breakdown and utilization of dietary sugars, such as galactose.

The Tagatose pathway is a bacterial pathway that allows for the utilization of galactose, a monosaccharide similar to glucose, as an energy source.

In this pathway, galactose is converted into tagatose, another monosaccharide, by the enzyme galactose isomerase.

The tagatose is then broken down into dihydroxyacetone phosphate (DHAP) and glyceraldehyde-3-phosphate (G3P) through a series of reactions, which can enter the glycolysis pathway for further energy production.

The Leloir pathway, on the other hand, is a pathway found in animals and some microorganisms that also converts galactose into glucose-6-phosphate (G6P), a molecule that can enter the glycolysis pathway.

In the Leloir pathway, galactose is converted into galactose-1-phosphate by the enzyme galactokinase, and then into UDP-galactose by the enzyme galactose-1-phosphate uridylyltransferase. UDP-galactose is then converted into UDP-glucose by the enzyme UDP-galactose 4-epimerase.

Finally, UDP-glucose is converted into G6P by the enzyme phosphoglucomutase.

In summary, while both pathways involve the conversion of galactose into glucose derivatives, the Tagatose pathway involves the conversion of galactose into tagatose and then into DHAP and G3P, while the Leloir pathway involves the conversion of galactose into G6P through a series of intermediate steps.

To know more about breakdown refer here

https://brainly.com/question/13092374#