Answer:
1.5 grams of carbon dioxide
Explanation:
According to this question, a dash of vinegar and baking soda balloon system weighed 65 grams. The system weighted 63.5grams after releasing the carbon dioxide in it.
This means that, to get the amount of carbon dioxide (CO2) produced in the system, we subtract the mass of the system after releasing CO2 from the initial mass of the system before releasing CO2.
That is;
Mass of CO2 produced = 65g - 63.5g
Mass of CO2 produced = 1.5grams
What is the wavelength of a light of frequency 6.42 x 1014 Hz?
O A. 598 nm
B. 467 nm
O C. 502 nm
D. 425 nm
Answer:
467 nm is the answer
Explanation:
IT'S the answer for
Can you divide equation I by another factor and still have it be correct?
Equation I cannot be divided by another factor as it will introduce errors in the equation.
What are errors?Errors in chemical analysis result when there is a difference between observed value and the true value.If the magnitude of errors is large , it results in decrease in accuracy, reproducibility, and precision.
There are three types of errors:1) random error 2) systematic error 3) human error.The cause of random errors are difficult to quantify while the human errors can be minimized by taking a range of readings to reduce the error.
Errors while measuring boiling point may be human errors while noting down the boiling temperature or instrumental or systematic error if there is a fault in the thermometer.
Learn more about errors,here:
https://brainly.com/question/15810279
#SPJ1
Do help me become a detective, would it matter if I chose triple science or not?
Answer:
no
Explanation:
Using your prior knowledge of reaction stoichiometry, what is the final percentage of each reactant remaining if each reaction went to completion? show work and reasoning to justify your answer
i) No reactant will be left as all of them have been converted to product after completion of this reaction.
ii) Final percentage of each reactant remaining if each reaction went to completion is about 99.9%.
What is molar ratio?The difference between the moles (or molecules) of reactants consumed and the moles (or molecules) of products produced in a chemical reaction is known as the molar ratio.
i) Now given the molar ratio of CV : NaOH is 1:1 . That means Equal moles of CV and NaOH are present in the solution. That means all the CV and NaOH molecules will react to form equal number of products.
So in this case, no reactant will be left as all of them have been converted to product after completion of reaction.
ii) In this case, the given NaOH : CV = 1000 : 1. That means per 1000 moles of NaOH, we have only 1 mole of CV. Now since 1 mole of CV can react with only 1 mole of NaOH, then after the reaction of this 1 mole CV, there will be no CV left . And only 999 NaOH molecules will be left in the solution
So here % CV left = 0%
% of NaOH left = 999 / 1000 × 100
% of NaOH left = 99.9 %
To know more about molar ratio visit:
https://brainly.com/question/17920577
#SPJ4
Complete question is attached below
Using the graph complete the table for points A, B, and C.  complete the row of point D
A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature
What is Gay- Lussac's Law?A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature. In other words, while the mass is fixed and the volume is constant, the pressure a gas exerts is proportional to the temperature of the gas.
In the year 1808, French scientist Joseph Gay-Lussac created this law. Gay-law Lussac's can be expressed mathematically as follows:
P ∝ T ; P/T = k
Where:
P is the pressure that the gas is applying.
T is the gas's actual temperature, while k is a fixed value.
Example of Gay-Lussac lawThe tire pressure of a car increases after driving. This is due to the air inside the tires heating up as a result of friction (a contact force) between the tires and the road. Gay-Law Lussac's states that because the air cannot expand because the tires are effectively fixed-volume containers, the pressure rises.
To know more about Gay-Lussac's law refer to:
https://brainly.com/question/2683502
#SPJ1
1. Write the complete chemical symbol for
the ion with 37 protons and 36 electrons.
Answer:
37 - Rubidium - Rb
Explanation:
9. Convert 17.92 L of CO to grams:
C- 12.011
0-15.999
Answer in FOUR Sig Figs with Units
Answer:
its correct answer is 22.4 grams
How many grams of CO2 are in 1.5L of a 1.2 M solution?
A. 0.8 grams
B. 1.25 grams
C. 35.2 grams
D. 55.0 grams
QUIZ 4: GOLDEN YEARS TO IONIZATION The elements with the highest ionization energy and thus the most unreactive are:
The elements with the highest ionization energy are the noble gases, which are located in the upper right corner of the periodic table. These elements include helium, neon, argon, krypton, xenon, and radon. These elements have a full valence electron shell, meaning that they have the maximum number of electrons possible in their outermost energy level. This makes them very stable and resistant to chemical reactions, as they do not have any electrons that can be easily removed or added.
As a result, they have very high ionization energy, meaning that a large amount of energy is required to remove an electron and form an ion. Due to these properties, these elements are not readily reactive with other elements and tend to exist as diatomic molecules or as individual atoms. These elements are used in a variety of industrial, medical, and everyday applications such as in lighting, refrigeration, and as inert gases in medical equipment and in the manufacturing of semiconductors.
Learn more about Ionisation Energy here: https://brainly.com/question/27356170
#SPJ4
Your lab group accidentally leaves a beaker of 1.00 \space M1.00 M \ce{NaOH}NaOH solution out on the lab table overnight and its volume is decreased to one third the original from evaporation, what is the new molarity
One of the lab groups unintentionally left a beaker with 1.00 M1.00 M of NaOH solution out on the lab table over night. The molarity of the solution is 3.00 M after evaporation.
The total moles of solute contained in a given volume of solution is referred to as a solution's molarity. In this case, "M" stands for molarity, "n" is the number of moles of solute present in the solution, and "V" is the volume of solution present in a container. A unique kind of homogenous mixture made up of two or more components is known as a solution in chemistry. A solute, or substance that is dissolved in a solvent, is one of the components of such a mixture.
Moles = 1.00/1/3 Moles = 3.00 M
Learn more about molarity here
https://brainly.com/question/8732513
#SPJ4
Since the reduction potential of ions is different, electrolysis can be used to selectively plate out one of the ions in a mixture. A 1.0 L solution containing 0.101 M NiBr2?aq) and 0.407 M CuBr2aq) is subjected to electrolysis. How much time (in hours) would it take to selectively plate out of the cations at a current of 5.0 A? Express your answer numerically to three sig figs in units of hours.
22.2 seconds will it take to selectively plate out of the cations current of 5.0 Amperes.
E∘cell=E∘cathode−E∘anode it is the formula for finding out the net cell potential of the electrolytic cell. We can write the cell reaction to solve the problem in the following way
1. Write down the (two half) reactions.
2. Balance the (half) reactions (Mass and Charge):
a. Start with elements other than H and O. b. Balance O by adding water.
c. balance H by adding H+.
d. Balancing charge by adding electrons.
(3. Multiply each half reaction to make the number of electrons equal.
4. Add the reactions and simplify.)
To know more about current here
https://brainly.com/question/1100341
#SPJ4
Show all the work and don't forget to show scientific notation!
In scientific notation, the result of multiplying an integer between 1 and 10 by a power of 10 is written.For instance, 650,000,000 can be represented as 6.5 108 in scientific notation.
Which four guidelines govern scientific notation?Always set the base to 10. The exponent must be an integer that is non-zero, therefore it can either be positive or negative. The absolute value of the coefficient must be less than ten and more than one.
What sort of notation would that be?a system of symbols for designating unique items. Example: In mathematics, the symbol "" stands for "infinity." There are many notations in mathematics.
To know more about scientific notation visit:-
https://brainly.com/question/18073768
#SPJ1
Examine the phase diagram for the substance Bogusium (Bo) and select the correct statement Pressure 760 ton AL C. •D Temperature O Point B represents the triple point for Bo. O Bo changes from a solid to a gas as one follows the line from C to D. O Bo changes from a solid to a liquid as one follows the line from C to D.
O Bo(s) has a lower density than Bol). O The triple point for Bo is at a higher temperature than the melting point for Bo.
The triple point of a substance is the temperature and pressure at which all three phases of the substance (solid, liquid, and gas) can coexist in equilibrium.
Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines, which indicates that all three phases can coexist in equilibrium at this point.
1. A triple point of a substance is the temperature and pressure at which all three phases of the substance can coexist in equilibrium.
2. Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines.
3. This indicates that all three phases can coexist in equilibrium at this point.
4. Therefore, the correct statement is that Point B represents the triple point for Bo.
learn more about triple point here
https://brainly.com/question/519191
#SPJ4
HELPPPP!!! SHOW WORK
If the directions that come with your car tell you to inflate the tires to 200 kPa pressure and you have a tire pressure gauge calibrated in pounds per square inch (psi), what pressure in psi would you use?
Answer:
Pressure = 29.0 psi
Explanation:
Step 1: Given data
Required pressure in the tires (P): 200 kiloPascal
Step 2: Convert the required pressure in the tires to pounds per square inch (psi)
To convert kPa to psi, we need a conversion factor. In this case, we will use the conversion factor 1 psi = 6.89 kPa.
200 kPa × (1 psi/6.89 kPa) = 29.0 psi
200 kPa is equal to 29.0 psi.
PLEASE HELP!!
Consider the following intermediate chemical equations.
C(s) + O2(g) → CO2(g) AH, --393.5kJ
2CO(g) + O2(g) → 2CO2(g) AH, --566.0kJ
2H2O(g) → 2H2(g)+O2(g) AH2 - 483.6 kJ
The overall chemical equation is C(s) + H2O(g) → CO(g) +H2(g). To calculate the final enthalpy of the overall chemica
equation, which step must occur?
Reverse the first equation, and change the sign of the enthalpy. Then, add.
O Reverse the second equation, and change the sign of the enthalpy. Then, add.
O Multiply the first equation by three, and triple the enthalpy. Then, add.
O Divide the third equation by two, and double the enthalpy. Then, add.
Answer:
answer is option 2 hope it helps
The step that must be occurred in the calculation of the enthalpy of the given reaction is option B, reverse the second equation, and change the sign of the enthalpy, then add.
What is enthalpy of a reaction ?The enthalpy of a reaction is the heat energy absorbed or released by the reaction system. For a reaction, the reaction enthalpy can be calculated using the enthalpies of the component reactions.
Here the overall reaction is the formation of CO and H₂ from C and water. The first step is to reverse the second equation and change sign of enthalpy and double the first equation. Then add them, so that the CO₂ get eliminated.
Then, the resultant equation is halved again. Then divide the third equation by two and its enthalpy value also divided by 2. Then add it to the previous one and we get the net equation and corresponding reaction enthalpy.
Therefore, the step that must occur here is option B.
Find more on reaction enthalpy:
https://brainly.com/question/1657608
#SPJ5
diatomic elements are important. what makes them different from other elemental substances?
Diatomic elements are important because they make up a significant portion of the Earth's atmosphere and are crucial for many biological and chemical processes.
Diatomic elements are elements that exist in nature as molecules made up of two atoms of the same element, such as H2, O2, N2, and F2.
A diatomic atom is one that cannot exist on its own. There are no single O atoms floating around in the sky. Because O atoms must exist in pairs, oxygen occurs as O2. These atoms are too unstable to live on their own.
This elements are different from other elemental substances because they are composed of multiple atoms of the same element, rather than a single atom or a mixture of different elements.
Learn more about diatomic elements here:https://brainly.com/question/23162019
#SPJ4
How many moles is 25g?
25 grams of a substance is equivalent to 0.0088 moles. To calculate the number of moles, the following equation can be used:
Number of moles = mass (in grams) / molar mass
The molar mass is the mass of 1 mole of a substance and is expressed in grams/mol. It is equal to the sum of the atomic masses of all the atoms in a molecule.
To calculate the number of moles from 25 grams, the molar mass of the substance must be known. Once the molar mass is known, the equation can be used to calculate the number of moles.
For example, if the substance is sodium chloride (NaCl), the molar mass is 58.44 g/mol. Applying the equation above, the number of moles can be calculated as 25 g / 58.44 g/mol = 0.0088 moles.
In conclusion, 25 grams of a substance is equal to 0.0088 moles. The molar mass of the substance must be known to calculate the number of moles from a given mass. Once the molar mass is known, the equation can be used to calculate the number of molecules.
Learn more about moles:
https://brainly.com/question/28037816
#SPJ4
advantages of universal indicators over the other acid base indicators
Explanation:
The advantage of the universal indicator is that it displays a variety of colors over the whole pH scale. This makes it possible to determine an approximate pH of a solution over a range from 1-14. whereas, A commonly used acid-base indicator is litmus.
Do the same enthalpy calculation for the products of the reaction, CO2+2H2O. Carefully count how many of each bound there is, and consider whether bonds are single or double bonds. Show work!!!!!! and list the totalbond enthalpy of the products.
The enthalpy of the reaction from the bond energy is +102 kJ/mol. Option C
What is the enthalpy of the reaction?We have to note that the enthalpy would have to do with the energy that ahs been absorbed or the energy that is released in a reaction. We know that if there is a release of energy then we can say that the reaction is exothermic but if we have a case where the energy has been taken in then we can say that the reaction in that case can be said to be exothermic.
We can see that the enthalpy of the reaction can be calculated on the basis of the bond energy when we write;
Energy of bonds that are broken - Energy of bonds that are formed.
[4(410) + 2(496)] - [2(805) + 2(460)]
(1640 + 992) - (1610 + 920)
2632 - 2530
= +102 kJ/mol
Hence, by calculation of the enthalpy bof the reaction, we can see that the reaction would absorb about 102 kJ of heat per mole of the reactant as shown.
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
How many molecules are in 0.25 mole of CO?
A. 6.0 x 1023
B. 1.5 X 1023
C. 9.0 x 1023
D. 3.0 x 1023
Rounded to the nearest significant figure, [tex]\rm 1.5 \times 10^{23 }[/tex] molecules are in 0.25 mole of [tex]\rm CO[/tex]. The correct answer is option B.
A mole is defined as the amount of a substance that contains exactly [tex]\ \rm 6.022 \times 10^{23}[/tex] 'elementary entities' of the given substance.
To calculate the number of molecules in 0.25 mole of CO, we can use Avogadro's number, which is the number of particles (atoms, molecules, etc.) in one mole of a substance. Avogadro's number is approximately [tex]\ \rm 6.022 \times 10^{23}[/tex] particles per mole.
Number of molecules = Number of moles x Avogadro's number
Substituting the given values, we get:
Number of molecules = 0.25 mole x [tex]\ \rm 6.022 \times 10^{23}[/tex] molecules/mole
= [tex]\rm 1.5 \times 10^{23 }[/tex]
Therefore, the number of molecules in 0.25 mole of CO is approximately [tex]\rm 1.5 \times 10^{23 }[/tex] molecules. Option B is the correct answer.
Learn more about mole here:
https://brainly.com/question/30892840
#SPJ6
In a first-order decomposition reaction. 33% of a compound decomposes in 7.3 min. How long (in min) does it take for 81.8% of the compound to decompose
In a first-order breakdown reaction, 81.8% of the molecule takes 19.0 min to break down. A compound breaks down in 7.3 minutes by 33%. The human race started to scratch right away.
A means of climbing the food chain. People snatched what they needed from those who were unsuccessful in the same race without regard for anyone else (the producers and the rest of the consumers). First order in both surfactant and acid concentrations, decomposition is a dislocation process of reaction. The process is autocatalytic since acid is produced during the degradation. Reservoir rock, on the other hand, has a sizable absorbing impact.
x = (81.8*7.3)/33 x = 19.0 min
Learn more about reaction here
https://brainly.com/question/28984750
#SPJ4
Draw a structural formula for the major organic product of the reaction shown below. CH3 - I + 2 CuLi - Consider E/Z stereochemistry of alkenes. - Do not show stereochemistry in other cases - You do not have to explicitly draw H atoms. - Do not include organocopper or inorganic ion by-products in your answer. Draw a structural formula for the major organic product of the reaction shown below
CH3(CH2)eCH2Br + 2 CuLi - Consider E/Z stereochemistry of alkenes. - Do not show stereochemistry in other cases - You do not have to explicitly draw H atoms. - Do not include organocopper or inorganic ion by-products in your answer.
The organocopper and inorganic ion by-products are not shown in this structural formula.
CH3CH=CH2Li
1. The reaction starts with CH3CH2CH2Br, which is a bromoalkane.
2. The bromine atom is replaced by a lithium atom with the help of two equivalents of copper.
3. The resulting product is CH3CH=CH2Li, which is an alkenyllithium compound.
CH3CH=CH2Li
The reaction starts with CH3CH2CH2Br, a bromoalkane. The bromine atom is replaced by a lithium atom with the help of two equivalents of copper. This is done via a nucleophilic substitution reaction, where the copper serves as a Lewis acid to facilitate the reaction. The resulting product is CH3CH=CH2Li, an alkenyllithium compound. This is the major organic product of the reaction and it has an E/Z stereochemistry. The organocopper and inorganic ion by-products are not shown in this structural formula.
learn more about organocopper here
https://brainly.com/question/20726790
#SPJ4
Assume you expand the group of materials you have to test to include metals. The forces that hold the atoms together in a metallic solid, or piece of metal, are referred to collectively as the "electron sea. " This is because, in a metallic solid, electrons do not stay close to a single atom, rather they move through the metal quite readily. The resulting electrostatic force between the positive nuclei of the metal atoms and the negative electrons is very strong and keeps the metal in the solid state. Given this information, describe the results you would expect to observe if you performed the melting point and conductivity tests on a metal sample
If you perform a melting point test on a metal sample, you would expect to observe that the metal has a relatively high melting point compared to non-metallic materials. This is because of the strong electrostatic forces between the positive nuclei of the metal atoms and the negative electrons, which hold the metal atoms together in a tightly packed lattice structure. As a result, a large amount of energy is required to overcome these forces and melt the metal.
Metal samples are expected to be excellent conductors of heat and electricity when a conductivity test is performed on them. This is because electrons in metallic solids move through the metal fairly easily and are free to move around the lattice structure. This free movement of electrons allows heat and electricity to easily pass through the metal, making it highly conductive.
Learn more about the properties and behavior of metals here: https://brainly.com/question/5190495
#SPJ4
What is a measuring stick called?
A measuring stick called meterstick or yardstick.
A meterstick or yardstick is either a foldable ruler or straightedge which is used to measure the length and it is specially common in the construction industry. Meterstick are made up of plastic or A measuring stick called meterstick or yardstick.
A meterstick or yardstick is either a foldable ruler or straightedge which is used to measure the length and it is specially common in the construction industry. Meterstick are made up of plastic or wood and they often have a metal or plastic joints so that they can be folded together. Metersticks are often rectangular and thin. Metersticks are divided with lines for each millimeter and numerical markings per centimeter. Whereas, yardsticks are often marked with a scale in inches. Measuring stick is also known as ruler. For example: We measure the diameter of a circle with a ruler, and also draw a perfectly straight line using its edge.
To know more about metal here
https://brainly.com/question/28650063
#SPJ4
A gas has a volume of 6.35 L at 88.6 kPa. What will be the volume at standard pressure? Standard Pressure = 101.3 kPa
Answer:
5.55 L
Explanation:
This excersise can be solved by the Boyle's law.
This law for gases states that the pressure of a gas in a vessel is inversely proportional to the volume of the vessel.
P₁ . V₁ = P₂ . V₂
The law comes from the Ideal Gases Law, in the first term.
P . V = n . R . T In this case, n . R . T are all constant.
6.35 L . 88.6 kPa = 101.3 kPa . V₂
V₂ = (6.35 L . 88.6 kPa) / 101.3 kPa
V₂ = 5.55 L
It is inversely proportional because, as it happened in this case, pressure was increased, therefore volume decreased.
help please i beg...
A chemistry student needs of glycerol for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of glycerol is . Calculate the volume of glycerol the student should pour out. Round your answer to significant digit
The student is to weigh out 94.5g of glycerol in accordance with the provided statement.
Glycerol: Is it simply sugar?Glycerin is a kind of carbohydrate known as a polyol, along with other sugar alcohols including sorbitol and erythritol. Glycerin has a complex taste, but unlike sugar I've already discussed—it is not absorbed by the body as sugar and does not raise blood sugar levels. Glycerol may be safe for short-term treatment when taken orally. Headaches, lightheadedness, bloat, nausea, and diarrhea are possible side effects. Glycerol appears to be safe when used topically. It might result in burning, itching, and redness.
1mL = 1cm³
Quantity = 75mL = 75cm³
1.26 g/cm³ is the density.
Mass = ?
Mass is equal to the product of volume and density.
Mass = 1.26 * 75 = 94.5g
To know more about Glycerol visit:
https://brainly.com/question/12093510
#SPJ4
The complete question is-
A chemistry student needs 75.0 mL of glycerol for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of glycerol is 1.26 g.cm⁻³. Calculate the mass of glycerol the student should weigh out. Be sure your answer has the correct number of significant digits.
For the homogeneous solution consisting of KCl and H2O, indicate the type of forces that are involved. Check all that apply. View Available Hint(s) dipole-dipole forces ion-dipole forces dispersion forces hydrogen bonding Submit Previous Answers X Incorrect; Try Again; 9 attempts remaining
For the homogeneous solution consisting of KCl and H₂O, the type of forces that are involved is the dipole-dipole forces, the ion-dipole forces dispersion forces, the hydrogen bonding.
In the homogeneous solution if the two compounds are KCl and H₂O, they both polar and the forces involved are dipole - dipole forces and the dispersion forces. the forces present in between the water molecules is the hydrogen bonding. the forces in between the K⁺ and the Cl⁻ present is the ion - dipole forces,
Thus the all the four forces present in the homogeneous solution of the KCl and H₂O that is the dipole-dipole forces, the ion-dipole forces, the dispersion forces, and the hydrogen bonding.
To learn more about forces here
https://brainly.com/question/7033619
#SPJ4
The volume of a given mass of gas varies inversely as its pressure. If the volume is 10dm3 when the pressure is 6atm, Find the pressure when the volume is doubled.
To solve this we must be knowing each and every concept related to ideal gas equation. Therefore, the pressure when the volume is doubled is 3atm.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas
V= volume of gas
n =number of moles of gas
T =temperature of gas
R = Gas constant = 0.0821 L.atm/K.mol
rearranging the above equation, we get
P₁V₁= P₂V₂
{ (6atm) (10dm[tex]_3[/tex])} ={ ( P₂) (20dm[tex]_3[/tex])}
P₂ = 3atm
Therefore, the pressure when the volume is doubled is 3atm.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ1
Oil of vitriol is a substance that humankind has known of for thousands of years! Today the substance is known by it's scientific name sulfuric acid and has the molecular formula H2SO4. What is the molar mass of H2SO4
The molar mass of H2SO4 is 98.08 g/mol. It is a combination of hydrogen with molecular weight of 1g, sulfur with 32g and oxygen with 16g and the total combination is 2x1+1x32+4x16 = 98g.
Humanity has been aware of oil of vitriol for thousands of years. The chemical name for this material is sulfuric acid, and its molecular formula is H2SO4. It is made up of sulfur, oxygen, and hydrogen molecules. Strong and hygroscopic sulfuric acid (H2SO4) has oxidizing and hygroscopic characteristics. Because it was made by roasting "green vitriol" (iron(II) sulfate) in an iron retort, sulfuric acid was known as "oil of vitriol" by medieval European alchemists. Due to its oily appearance and occurrence in vitreous or glassy substances like ferrous sulphate and alum, it is also known as the "oil of vitriol."
To learn more about sulfuric acid click here https://brainly.com/question/29303579
#SPJ4