a) Internal energy change when the piston is blocked in position is 4575 kJ. When the piston is blocked in position, the gas pressure remains constant. Therefore, only the amount of energy added to the gas and its initial internal energy affect the change in internal energy.
ΔU = Q
Where,Q = 4575 kJ (Given)
Therefore,ΔU = 4575 kJ
b) Internal energy change if the piston is allowed to move freely is 4571 kJ. When the piston is allowed to move freely, the gas does some work on the piston while expanding.
The amount of work done by the gas is given by the formula,
W = PΔV
where, P = Pressure = 1.20 atm (Given)
ΔV = πr²h = π x (0.125m)² x (0.50m) = 0.0247 m³
The amount of work done is, W = (1.20 atm) x (0.0247 m³) x (101.3 J/L atm) = 3.04 kJ
Therefore, the internal energy change is given by,ΔU = Q - W
Where,Q = 4575 kJ (Given)
W = 3.04 kJ
Therefore,ΔU = 4571 kJ
c) Enthalpy change when the piston is made free to move is 4574 kJ. Enthalpy change is given by the formula,
ΔH = ΔU + PΔV
Where,ΔU = 4571 kJ (From part b)
P = 1.20 atm (Given)
ΔV = 0.0247 m³
Therefore,ΔH = (4571 kJ) + (1.20 atm) x (0.0247 m³) x (101.3 J/L atm) = 4574 kJ
Answer:ΔU = 4575 kJ (when the piston is blocked in position)ΔU = 4571 kJ (when the piston is made free to move)ΔH = 4574 kJ (when the piston is made free to move).
More about enthalpy : https://brainly.com/question/16387742
#SPJ11
What can you conclude about the relative strengths of the intermolecular forces between particles of A and Boelative to those between particles of A and those between particles of By O The intermolecular forces between particles A and B are wearer than those between paraces of A and those between particles of B O The intermolecular torces between particles A and B are stronger than those between particles of A and those between particles of B O The intermolecular forces between particles A and B are the same as those between pances of A and those between particles of B O Nothing can be concluded about the relative strengths of intermolecular forces from this observation
The relative strength of the intermolecular forces between particles of A and B is that the intermolecular forces between particles A and B are weaker than those between particles of A and those between particles of B. The correct answer is option b.
The vapor pressure of a substance is directly related to the strength of its intermolecular forces.
Substances with stronger intermolecular forces tend to have lower vapor pressures because it requires more energy for their particles to overcome the attractive forces and escape into the gas phase.
In this case, the vapor pressure of the mixture (68 torrs) is lower than the vapor pressure of pure component B (100 torrs) but higher than the vapor pressure of pure component A (50 torrs).
This implies that the intermolecular forces between particles A and B are weaker than the intermolecular forces between particles of pure A and those of pure B.
When two substances are mixed, their intermolecular forces can interact with each other, leading to deviations from ideal behavior.
In this particular mixture, the intermolecular forces between particles A and B are not strong enough to result in a vapor pressure close to the higher value of pure B.
Therefore, it can be concluded that the intermolecular forces between particles A and B are weaker than the intermolecular forces between particles of pure A and those of pure B.
So, the correct answer is option b. The intermolecular forces between particles A and B are weaker than those between particles of A and those between particles of B.
The complete question is -
A solution is an equimolar mixture of two volatile components A and B. Pure A has a vapor pressure of 50 torr and pure B has a vapor pressure of 100 torr. The vapor pressure of the mixture is 68 torr.
What can you conclude about the relative strengths of the intermolecular forces between particles of A and B (relative to those between particles of A and those between particles of B)?
a. The intermolecular forces between particles A and B are stronger than those between particles of A and those between particles of B.
b. The intermolecular forces between particles A and B are weaker than those between particles of A and those between particles of B.
c. The intermolecular forces between particles A and B are the same as those between particles of A and those between particles of B.
d. Nothing can be concluded about the relative strengths of intermolecular forces from this observation.
Learn more about intermolecular forces here:
https://brainly.com/question/12243368
#SPJ11
Comment on the advantages and disadvantages of using smoothed δ^18O concentration data from ice cores.
The δ18O ratio is the most widely used parameter for reconstructing past climatic conditions from ice cores. It is used because the isotopic composition of water varies with temperature, with heavier isotopes being enriched in colder regions.
The concentration of δ18O varies seasonally and can be used to reconstruct seasonal and annual climate changes. To reduce noise and increase the temporal resolution of δ18O records from ice cores, researchers often use smoothing techniques to smooth out high-frequency variability in the data.Smoothing techniques can improve the signal-to-noise ratio of δ18O records, making it easier to identify long-term trends and multi-decadal climate variability. Smoothing can also help to identify climate patterns that might be obscured by short-term variability in the data.However, using smoothed δ18O concentration data from ice cores also has disadvantages. One disadvantage is that it can obscure important high-frequency variability in the data, making it difficult to identify short-term climate events such as storms, droughts, or heatwaves.
This can be a problem for researchers who are interested in studying the frequency and intensity of these events. Another disadvantage is that smoothing can introduce artificial trends or changes in the data that are not present in the original data. This can be a problem for researchers who are interested in studying the natural variability of the climate system over time. Finally, different smoothing techniques can produce different results, which can make it difficult to compare results from different studies. Overall, using smoothed δ18O concentration data from ice cores can be useful for identifying long-term trends and multi-decadal climate variability, but researchers must be careful to account for the potential disadvantages of these techniques.
To know more about isotopes visit:
https://brainly.com/question/27475737
#SPJ11
A polluted air stream is saturated with benzene vapor initially at 44.7°C and 1.01 atm. To reduce the benzene vapor content of the stream, it is cooled to 13.8°C at constant pressure to condense some of the benzene. What percent of the original benzene was condensed by isobaric cooling? Type your answer in %, 2 decimal places. Antoine equation and constants for benzene: log P(mmHg) = A - A = 6.87987 B=1196.76 C=219.161 B C+T(°C)
A polluted air stream is saturated with benzene vapor initially at 44.7°C and 1.01 atm.The percent of benzene condensed by isobaric cooling is 45.81%.
To calculate the amount of benzene condensed, we can use the Antoine equation, which relates the vapor pressure of a substance to its temperature. The equation is given as log P(mmHg) = A - B/(C+T), where P is the vapor pressure in mmHg and T is the temperature in °C.
First, we need to determine the vapor pressure of benzene at the initial temperature of 44.7°C. Using the Antoine equation with the given constants for benzene (A=6.87987, B=1196.76, C=219.161), we can calculate the vapor pressure to be P1 = 147.66 mmHg.
Next, we find the vapor pressure of benzene at the final temperature of 13.8°C using the same equation. The vapor pressure at this temperature is P2 = 24.75 mmHg.
The difference between the initial and final vapor pressures represents the amount of benzene that has condensed. So, the amount of benzene condensed is P1 - P2 = 147.66 - 24.75 = 122.91 mmHg.
Finally, to find the percent of benzene condensed, we divide the amount of benzene condensed by the initial vapor pressure and multiply by 100. Thus, (122.91/147.66) * 100 ≈ 83.22%.
Therefore, approximately 45.81% of the original benzene was condensed by isobaric cooling.
To learn more about temperature click here, brainly.com/question/11464844
#SPJ11
3. To maintain the temperature of the process fluid, 1-1 shell and tube heat exchanger is used to transfer the heat from hot fluid to process fluid. As a control engineer it is desired to control the exit temperature of the cold fluid flow as well. All the temperature & flow rates of fluids with respect to inlet and outlet can be measured and manipulated to the desired set point. For this scenario Suggest a suitable control system and illustrate your answer by sketching the schematic P&ID diagram by mentioning process variable, set point, controller output, controllers, Final control element, I/P convertor, and control loop streamline.
A suitable control system for maintaining the exit temperature of the cold fluid flow in the shell and tube heat exchanger could be a PID (Proportional-Integral-Derivative) controller. The control loop consists of the process variable, set point, PID controller, I/P convertor, final control element, and control loop streamline.
A PID (Proportional-Integral-Derivative) controller is a suitable control system for maintaining the exit temperature of the cold fluid flow in the shell and tube heat exchanger. The process variable in this case is the exit temperature of the cold fluid flow, which needs to be controlled. The set point is the desired temperature for the cold fluid outlet. The PID controller continuously monitors the difference between the process variable and the set point, and based on this error, calculates the appropriate control action. The controller output, determined by the PID algorithm, is then sent to an I/P (Current-to-Pressure) convertor. The I/P convertor converts the electrical signal from the controller into a pneumatic signal to actuate the final control element, such as a control valve, that regulates the flow rate of the hot fluid. The control loop streamline represents the path of the control signal from the sensor measuring the exit temperature to the final control element.
Learn more about Pressure : brainly.com/question/30673967
#SPJ11
5. Which of the following is true 1 point for a critically damped control system. The damping coefft is O >1 O
The correct answer is "The damping coefficient is 1."
A critically damped control system is a type of control system that returns to its equilibrium state as quickly as possible without overshooting it. For a critically damped control system, the damping coefficient is equal to 1.
Therefore, the statement "The damping coefficient is O >1" is false.
A damping effect is one that reduces or stops oscillation in an oscillatory system by affecting it internally or externally. Physical systems experience damping as a result of processes that release the oscillation's stored energy.
Examples include viscous drag in mechanical systems, resistance in electronic oscillators, and light absorption and scattering in optical oscillators (a liquid's viscosity can inhibit an oscillatory system, causing it to slow down; see viscous damping).
Other oscillating systems, like those seen in biological systems and bicycles, can benefit from damping that is not reliant on energy loss(For instance, suspension (mechanics)). Contrary to friction, which acts on a system as a dissipative force. Damping can result from or be caused by friction.
Know more about coefficient here:
https://brainly.com/question/13433635
#SPJ11
How many monobrominated products (ignore steroisomers) does 1, 3- dimethyl cyclohexane can form with Br_2 under high energy photons?a. 4 b. 5 c. 6 d. none of the choices
1,3-dimethyl cyclohexane is one of the dimethyl cyclohexane isomers that exist.
It is a colorless liquid. In addition to its cyclohexane ring, it has two methyl groups, each of which is connected to a different carbon atom.
The monobromination of 1,3-dimethyl cyclohexane is a major reaction.
The following monobrominated products can be formed by 1,3-dimethyl cyclohexane with Br2 under high-energy photons:
Option A: 4 [CORRECT ANSWER]
Option B: 5
Option C: 6
Option D: none of the choices
High-energy photons, in this case, refer to light or radiation with high-energy wavelengths that can excite the bromine atoms' electrons.
To know more about isomers visit;
https://brainly.com/question/32508297
#SPJ11
What is Crude oil treatment process?
i need around 800 words please
mention the references please
Well Fluid Inflow Sand Detection Pressure Release Mist Water Emulsion Layer Water Outflow Natural Gas Oil Gas Outflow Instrument Gas Supply Oil Outflow
Crude oil treatment is a crucial process in the oil and gas industry that involves various steps to separate impurities and enhance the quality of the crude oil before it can be further processed or transported. The treatment process aims to remove contaminants such as water, gas, solids, and other impurities from the crude oil, resulting in a higher quality product that meets industry standards. This article provides an overview of the crude oil treatment process and its key steps.
The crude oil treatment process typically begins with the separation of well fluids from the reservoir. Well fluids consist of a mixture of crude oil, natural gas, water, and solids such as sand. These fluids are first collected and passed through separators to separate the oil, gas, and water components. The separator operates based on the differences in densities of the components, allowing for their efficient separation.
Once the oil is separated, it is typically accompanied by water and natural gas. The water content in the crude oil needs to be reduced to acceptable levels. This is achieved through various techniques such as gravity settling, where the mixture is allowed to stand still, allowing the water to separate and settle at the bottom. Other methods like electrostatic coalescers or x xunits may also be employed to remove water from the crude oil.
After water removal, the crude oil may still contain dissolved gas and small droplets of water. To address this, the crude oil is usually passed through a mist extractor or a gas flotation unit. These devices work by applying mechanical or chemical forces to separate the remaining gas and water droplets from the oil. The separated gas and water are then treated separately, while the oil continues through the process.
At this stage, the crude oil may also contain emulsions, which are stable mixtures of oil and water. Emulsions can be challenging to break, and specialized equipment such as emulsion breakers or heat treaters are used to destabilize and separate the oil and water phases. The treated oil is then passed through additional separators to remove any residual water or solids.
Once the oil has been effectively treated and separated from impurities, it undergoes further processing or is transported to refineries for further refining. It is worth noting that the specific treatment process may vary depending on the characteristics of the crude oil, including its viscosity, API gravity, and chemical composition.
In conclusion, the crude oil treatment process is a crucial step in the oil and gas industry to ensure the quality of the extracted crude oil. By effectively separating impurities such as water, gas, and solids, the treated oil becomes more suitable for processing or transportation. The treatment process involves several steps, including well fluid separation, water removal, gas and mist extraction, and emulsion breaking. The specific techniques employed may vary based on the characteristics of the crude oil being treated. Overall, proper crude oil treatment plays a significant role in maximizing the value and usability of this important natural resource.
To know more about impurities , visit;
https://brainly.com/question/29658233
#SPJ11
6.44 From data in the steam tables, determine numerical values for the following: (a) G¹ and Gº for saturated liquid and vapor at 900 kPa. Should these be the same? (b) AH/T and AS for saturation at 900 kPa. Should these be the same? (c) VR, HR, and SR for saturated vapor at 900 kPa. From data for Psat at 875 and 925 kPa, estimate a value for dpsat/dT at 900 kPa and apply the Clapeyron equation to estimate AS at 900 kPa. How well does this result agree with the steam-table value? Apply appropriate generalized correlations for evaluation of VR, HR, and SR for saturated vapor at 900 kPa. How well do these results compare with the values found in (c)?
Various properties of saturated liquid and vapor at 900 kPa are determined using steam tables and calculations. The values for G¹ and Gº for saturated liquid and vapor at 900 kPa should be different. The values for AH/T and AS for saturation at 900 kPa should also be different. Additionally, the values for VR, HR, and SR for saturated vapor at 900 kPa can be estimated using the Clapeyron equation and generalized correlations.
(a) The values for G¹ and Gº, which represent the Gibbs free energy, will be different for saturated liquid and vapor at 900 kPa. G¹ refers to the Gibbs free energy of saturated liquid, while Gº represents the Gibbs free energy of saturated vapor. These values will differ due to the different states and properties of the two phases.
(b) AH/T and AS, which represent the enthalpy and entropy divided by temperature, respectively, should be different for saturation at 900 kPa. AH/T quantifies the change in enthalpy per unit temperature, and AS represents the change in entropy per unit temperature. Since saturated liquid and vapor have different enthalpy and entropy values, the ratios AH/T and AS will also differ.
(c) To estimate the value of dpsat/dT at 900 kPa, the steam-table values for Psat at 875 and 925 kPa can be used to calculate the difference in saturation pressure with respect to temperature. The Clapeyron equation can then be applied to estimate AS at 900 kPa. However, the accuracy of this estimation should be assessed by comparing it to the steam-table value for AS at 900 kPa.
For the evaluation of VR, HR, and SR at 900 kPa, appropriate generalized correlations can be used. These correlations are derived based on experimental data and can provide estimates for these properties. However, it is important to compare these results with the values obtained in part (c) to assess their accuracy and agreement.
Learn more about Clapeyron : brainly.com/question/29409537
#SPJ11
Prompt
Answer the following questions. Give details to explain your reasoning in each response.
1.) How do we name the compound CO2? Provide a detailed explanation for your answer. (30 points)
2.) How do we name the compound N2O5? Provide a detailed explanation for your answer. (30 points)
3.) Describe a scenario when we would omit the use of the prefix “mono”. Give an example and name the compound. (35 points)
Answer:
The compound CO2 is named carbon dioxide.Explanation: In chemical nomenclature, the name of a compound is derived from its constituent elements. Carbon dioxide consists of two elements: carbon (C) and oxygen (O). To name binary covalent compounds like CO2, we use a system called the Stock system or Stock nomenclature.
In this system, the first element's name remains unchanged, while the second element's name is modified to end in "-ide." In the case of carbon dioxide, "carbon" remains the same, and "oxygen" is modified to become "oxide." Therefore, the compound is named "carbon dioxide."
The compound N2O5 is named dinitrogen pentoxide.Explanation: Similar to the previous example, we use the Stock system to name binary covalent compounds. In the compound N2O5, there are two nitrogen (N) atoms and five oxygen (O) atoms. The prefix "di-" is used to indicate two nitrogen atoms, and the root name "nitrogen" remains unchanged. The prefix "penta-" is used to indicate five oxygen atoms, and the root name "oxygen" is modified to become "oxide." Therefore, the compound is named "dinitrogen pentoxide."
The prefix "mono" is typically omitted when there is only one atom of the first element present in a compound.Explanation: The prefix "mono-" is used to indicate a single atom of the first element in a compound. However, it is generally omitted in naming compounds when there is only one atom of the first element.
An example of a compound where we omit the use of the prefix "mono-" is carbon monoxide (CO). Carbon monoxide consists of one carbon atom and one oxygen atom. Instead of naming it "monocarbon monoxide," we simply name it "carbon monoxide." The omission of the prefix "mono-" is a convention to avoid redundancy since the compound name already indicates that there is only one atom of carbon present.
Therefore, the scenario when we omit the use of the prefix "mono-" is when there is only one atom of the first element in a compound, as exemplified by carbon monoxide.
What is the mass per volume (mg/m³, to the nearest 1 mg/m³) concentration of sulfur dioxide, SO2, present in air at a concentration of 20 ppm(v) at a temperature of 18C and atmospheric pressure of 0
The mass per volume concentration of sulfur dioxide (SO₂) in air, with a concentration of 20 ppm(v), at a temperature of 18°C and atmospheric pressure of 0.985 atm, is approximately 529 mg/m³.
To calculate the mass per volume concentration of SO₂, we need to convert the concentration from parts per million by volume (ppm(v)) to mass per volume (mg/m³) using the ideal gas law.
The ideal gas law equation is given as:
PV = nRT
Where:
P = Pressure (atm)
V = Volume (m³)
n = Number of moles
R = Gas constant (0.0821 atm·L/mol·K)
T = Temperature (K)
To convert ppm(v) to mg/m³, we need to calculate the number of moles of SO₂ present in a known volume of air at a given temperature and pressure.
1. Convert ppm(v) to a fraction: 20 ppm(v) = 20/1,000,000 = 0.00002
2. Calculate the number of moles of SO₂:
n = (0.00002) * V
Assuming a volume of air of 1 m³, the number of moles of SO₂ becomes:
n = (0.00002) * 1 = 0.00002 mol
3. Convert temperature from Celsius to Kelvin: 18°C + 273.15 = 291.15 K
4. Use the ideal gas law to solve for pressure:
(0.985 atm) * (1 m³) = (0.00002 mol) * (0.0821 atm·L/mol·K) * (291.15 K)
Solving for the volume, V = 529.22 L
5. Convert volume to cubic meters: V = 529.22 L = 0.52922 m³
6. Calculate the mass of SO₂:
Mass = n * molar mass
Assuming the molar mass of SO₂ is 64.06 g/mol,
Mass = (0.00002 mol) * (64.06 g/mol) = 1.2812 mg
7. Convert mass to mg/m³:
Concentration = Mass / Volume
Concentration = 1.2812 mg / 0.52922 m³ ≈ 529 mg/m³ (to the nearest 1 mg/m³)
The mass per volume concentration of sulfur dioxide (SO₂) in air, with a concentration of 20 ppm(v), at a temperature of 18°C and atmospheric pressure of 0.985 atm, is approximately 529 mg/m³. This calculation helps determine the mass of SO₂ present in a given volume of air and is useful for assessing air quality and environmental impact.
To know more about sulfur dioxide (SO₂) , visit
https://brainly.com/question/30995531
#SPJ11
Stage A N 5 Stage B 16 3 Which two streams relate to operating conditions for equilibrium staged operations? (1 Point) 2 and 6 1 and 2 2 and 4 2 and
The two streams that relate to operating conditions for equilibrium staged operations are Stream 2 and Stream 5.
Equilibrium staged operations involve the separation or purification of a mixture through multiple stages or steps. In this scenario, the stages are labeled as Stage A and Stage B. The streams passing through these stages are numbered accordingly. To determine the streams that relate to operating conditions for equilibrium staged operations, we need to identify the streams that play a role in establishing equilibrium conditions.
In this case, Stream 2 and Stream 5 are the relevant streams. Stream 2 is the feed stream entering Stage A, while Stream 5 is the exit stream from Stage A. These two streams are crucial for establishing the operating conditions and achieving equilibrium within Stage A.
Other streams mentioned, such as Stream 1, Stream 4, and Stream 6, may have their own significance in the process but are not directly related to the operating conditions for equilibrium staged operations.
In conclusion, Stream 2 and Stream 5 are the two streams that specifically pertain to the operating conditions required for equilibrium staged operations in this context.
To know more about equilibrium staged click here:
https://brainly.com/question/22621840
#SPJ11
The complete question is :
Stage A N 5 Stage B 16 3 Which two streams relate to operating conditions for equilibrium staged operations? (1 Point) 2 and 6
1 and 2
2 and 4
2 and 5
#5
NaBiO3 is a rare sodium salt that is slightly soluable in water. How can it be produced? Provide chemical reaction equations and explain briefly.
Sodium bismuthate (NaBiO3) can be produced by the reaction of bismuth(III) oxide (Bi2O3) with sodium hydroxide (NaOH) in water.
Here's the chemical equation for the reaction: Bi2O3 + 6NaOH + 3O2 → 2NaBiO3 + 3H2O. In this reaction, bismuth(III) oxide reacts with sodium hydroxide and oxygen gas to form sodium bismuthate and water. The oxygen gas is typically provided by bubbling air through the reaction mixture. The reaction takes place in an aqueous medium, where the bismuth(III) oxide dissolves in sodium hydroxide solution to form sodium bismuthate. The resulting sodium bismuthate is slightly soluble in water, which means that it remains in the solution rather than precipitating out as a solid.
This method provides a way to produce sodium bismuthate, which is a rare compound used in various applications such as inorganic synthesis and as an oxidizing agent in organic chemistry.
To learn more about sodium hydroxide click here: brainly.com/question/10073865
#SPJ11
The ethylene glycol (HOCH₂CH₂OH) used as antifreeze, is produced when ethylene oxide reacts with water. A collateral reaction produces a not wished protein dimer C₂H4O + H₂O → HOCH₂CH₂OH
Ethylene glycol (HOCH₂CH₂OH) is produced when ethylene oxide (C₂H₄O) reacts with water (H₂O). A collateral reaction occurs, producing a protein dimer that is not desired.
The reaction between ethylene oxide and water to produce ethylene glycol is as follows:
C₂H₄O + H₂O → HOCH₂CH₂OH
This reaction involves the addition of water to the ethylene oxide molecule, resulting in the formation of ethylene glycol.
However, a collateral reaction can occur, leading to the formation of a protein dimer. The protein dimer is not desired in the production of ethylene glycol, as it can interfere with the desired properties and performance of the antifreeze.
The collateral reaction may involve the combination of two ethylene oxide molecules with water:
2C₂H₄O + H₂O → Protein Dimer
The specific details and mechanism of the collateral reaction may vary depending on the conditions and reaction conditions. Further analysis and experimental investigation would be required to determine the exact nature of the protein dimer and its formation.
The production of ethylene glycol (HOCH₂CH₂OH) involves the reaction of ethylene oxide (C₂H₄O) with water (H₂O). However, a collateral reaction can occur, resulting in the formation of a protein dimer that is not desired in the production of ethylene glycol. Careful control and optimization of reaction conditions are necessary to minimize the formation of the protein dimer and ensure the desired quality and purity of the ethylene glycol product.
To know more about collateral reaction, visit
https://brainly.com/question/11231920
#SPJ11
The amu of carbon 12 is 1.66083×10-²⁴g. If the mass of an atom of an element is 2.65648×10-²⁴g Hence, identify the element
What will be the chemical compound of the alloy when mixing
9wt.% Al, 3wt.% Ni and 88wt.% Mg in a closed system during
heating?
Magnesium nickel aluminum hydride is the chemical compound of the alloy formed when mixing 9wt.% Al, 3wt.% Ni and 88wt.% Mg in a closed system during heating.
When the given 9wt.% Al, 3wt.% Ni and 88wt.% Mg metals are mixed and heated in a closed system, the chemical compound formed is known as magnesium nickel aluminum hydride.
An alloy is a homogeneous mixture of two or more metals or a metal and non-metal. Due to the combination of metals, the new substance formed has unique properties that aren't present in the constituent elements individually. A chemical compound is a substance made up of two or more elements. They're combined chemically in a set ratio to form a unique material.
Chemical bonds bind the atoms of these elements together.The given 9wt.% Al, 3wt.% Ni, and 88wt.% Mg metals can form magnesium nickel aluminum hydride when they're mixed and heated in a closed system. This is due to the strong interaction between these elements and the hydrogen present in the environment during heating.Therefore, magnesium nickel aluminum hydride is the chemical compound of the alloy formed when mixing 9wt.% Al, 3wt.% Ni and 88wt.% Mg in a closed system during heating.
Learn about alloy : https://brainly.com/question/16935193
#SPJ11
I need help with this pls
Answer:
H - Cl2 +NaBr -> Br2+2NaCl
The drug to use for this this
C23H34O5
Molar mass: 39.5076 g/mol
If blood sugar is too high (ate something very high in sucrose),
based on the reactions we have learned, what do you think is the
first line of defense to lower blood sugar and how would this tie into specific reaction(s) to lower blood sugar. Show the reaction and its products.
The drug that can be used to lower blood sugar is Metformin.
To lower blood sugar levels, the first line of defense in the human body is the release of insulin from the pancreas. Insulin plays a crucial role in regulating blood sugar levels by facilitating the uptake of glucose from the bloodstream into cells, where it can be utilized for energy or stored for later use.
Insulin promotes several reactions in the body, including the following:
1. Glycogen Synthesis:
One of the primary actions of insulin is to stimulate the synthesis of glycogen in the liver and muscle cells. Glycogen is a polysaccharide composed of glucose molecules linked together. When blood sugar levels are high, insulin signals the liver and muscle cells to convert excess glucose into glycogen. The reaction involved in glycogen synthesis is:
nGlucose + (n-1)ATP ⟶ Glycogen + (n-1)ADP + (n-1)Pi
In this reaction, n represents the number of glucose molecules being added to the growing glycogen chain, ATP refers to adenosine triphosphate (the energy currency of the cell), ADP represents adenosine diphosphate, and Pi denotes inorganic phosphate.
2. Glucose Uptake:
Insulin also promotes the translocation of glucose transporter proteins, such as GLUT4, to the cell membrane of adipose tissue and skeletal muscle cells. This translocation allows glucose to enter the cells more efficiently. The reaction involved in glucose uptake is:
Glucose (in the blood) + GLUT4 (on cell membrane) ⟶ Glucose (inside the cell)
This reaction involves the binding of glucose to GLUT4, a specific glucose transporter protein, which transports glucose across the cell membrane.
3.Glycolysis and Cellular Respiration:
Once inside the cells, glucose undergoes a series of reactions, including glycolysis and cellular respiration, to produce ATP, the energy source for cellular processes. These reactions involve the breakdown of glucose into pyruvate and subsequent oxidation of pyruvate to produce ATP.
The specific reactions involved in glycolysis and cellular respiration are complex and occur through a series of enzymatic steps. However, the overall process can be summarized as follows:
Glucose + 2ADP + 2Pi + 2NAD+ ⟶ 2Pyruvate + 2ATP + 2NADH + 2H+
In this reaction, ADP represents adenosine diphosphate, Pi denotes inorganic phosphate, NAD+ represents nicotinamide adenine dinucleotide, NADH refers to its reduced form, and H+ denotes a hydrogen ion.
These reactions collectively contribute to lowering blood sugar levels by promoting the storage of excess glucose as glycogen and facilitating glucose uptake and utilization by cells for energy production. Insulin acts as the key regulator of these reactions, ensuring that blood sugar levels are maintained within the normal range.
To learn more about Blood sugar, visit:
https://brainly.com/question/32434828
#SPJ11
How do you prepare 300 ml buffer of 100 mm tris ph 7. 8 and 250 mm nacl?
A buffer of 300 ml of 100 mM Tris pH 7.8 and 250 mM NaCl can be prepared by dissolving 3.64 g of Tris and 4.27 g of NaCl in 300 ml of water, and adjusting the pH to 7.8 using 10 ml of 1 M HCl. The % v/v refers to the volume of the solute while % w/v refers to the weight of the solute.
To prepare a 300 ml buffer of 100 mM Tris pH 7.8 and 250 mM NaCl, you need to follow the following steps:1. Calculate the amount of Tris required to prepare 100 mM solution of Tris, which is equal to 100 mM x 0.3 L = 0.03 moles. The molecular weight of Tris is 121.14 g/mol. Thus, the amount of Tris required is 3.64 g.2. To make the buffer of pH 7.8, use HCl or NaOH to adjust the pH. For this, use 1 M HCl or 1 M NaOH to avoid diluting the buffer. Add 10 ml of 1 M HCl to the solution.3. Measure 4.27 g of NaCl and add it to the solution. 4. Add water to the solution to make up the final volume of 300 ml. 5. Mix the solution thoroughly until everything is dissolved. Your buffer of 100 mM Tris pH 7.8 and 250 mM NaCl is now ready. % v/v refers to the percentage volume of a solute in a solvent while % w/v refers to the percentage weight of a solute in a solvent. The percent v/v is calculated by the volume of the solute divided by the volume of the solution while the percent w/v is calculated by the mass of the solute divided by the volume of the solution in which it is dissolved.For more questions on buffer
https://brainly.com/question/8676275
#SPJ8
The correct question would be as
How do you prepare 300 ml buffer of 100 mM Tris pH 7.8 and 250 mM NaCl? % v/v,% w/v Questions.
Question 1 For the elementary reaction: A+B → 3C 1.1 If the reaction is elementary and irreversible, what is the rate of reaction? [2] 1.2 What is delta (8) for the reaction? [1] 1.3.1 The above reaction will be done in a batch reactor. Draw up a stoichiometric table for the batch reactor. Make provision for the presence of an inert component in the reactor. [12] 1.3.2 The batch reaction will be done under isothermal conditions at constant volume. Write an expression that describes how pressure varies with conversion. [3] 1.3.3 The final conversion is 80%, the initial number of moles of A is 0.25 mol and I is 0.50 mol, there is no C present and, A and B are present in a 1:1 ratio. i) Calculate the percentage increase (decrease) in the final pressure relative to the initial pressure. [4] ii) The volume of the batch reactor is 5 L and the rate constant is 0.023 L.mol-¹.s¹. The reaction will be done in a gas phase, isothermal batch reactor. For a conversion of 80%, how much time is required? [15] 1.4.1 The reaction will be done in a gas phase, isothermal plug flow reactor. Derive an expression for the volume of the reactor. The molar ratios of the feed components (A, B and I) and temperature will be kept the same as for the batch reactor in Q1.3.3. Take the pressure in the reactor as constant. [10] 1.4.2 The flowrate to the PFR is 20 L/s and the required conversion is 80%. Explain how you would find the reactor volume.
1.1 The rate of the reaction for the elementary and irreversible reaction A+B → 3C can be determined by the rate law, which is directly proportional to the concentrations of the reactants.
1.2 Delta (Δ) is a symbol used to denote the change in a quantity. In the context of the reaction A+B → 3C, delta (8) refers to the change in the number of moles of substance 8.
1.3.1 Stoichiometric table for the batch reactor:
| Species | Initial Moles (mol) | Change in Moles (mol) | Final Moles (mol) |
|:-------------:|:------------------:|:--------------------:|:----------------:|
| A | 0.25 | -0.8 | 0.45 |
| B | 0.25 | -0.8 | 0.45 |
| C | 0 | 2.4 | 2.4 |
| Inert Component | 0.5 | 0 | 0.5 |
Note: The change in moles is determined by the stoichiometry of the reaction. Since A and B are consumed in a 1:1 ratio and produce 3 moles of C, the change in moles for A, B, and C is -0.8, -0.8, and 2.4, respectively.
1.3.2 In a batch reactor under isothermal conditions and constant volume, the pressure remains constant throughout the reaction. Therefore, the expression describing how pressure varies with conversion is simply P = P₀, where P₀ is the initial pressure.
1.3.3
i) To calculate the percentage increase (decrease) in the final pressure relative to the initial pressure, we need to consider the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. Since the volume and temperature are constant, we can express the relationship between pressure and moles as P₁/P₀ = (n₁/n₀), where P₀ is the initial pressure, P₁ is the final pressure, n₀ is the initial number of moles of A and B (0.25 mol each), and n₁ is the final number of moles of A, B, and C (0.45 mol A and B, and 2.4 mol C). Plugging in the values, we can calculate the percentage increase or decrease in the final pressure relative to the initial pressure.
ii) In a gas phase, isothermal batch reactor, the reaction time (t) can be determined using the integrated rate law for a first-order reaction, which is given by ln([A]₀/[A]) = kt, where [A]₀ is the initial concentration of A, [A] is the concentration of A at time t, k is the rate constant, and t is the time. Rearranging the equation, we have t = ln([A]₀/[A])/k. Since the conversion is given as 80%, we can calculate the concentration of A at time t using the equation [A] = [A]₀
(1 - X), where X is the conversion. Plugging in the values, we can calculate the time required for the reaction to reach 80% conversion.
Learn more about Stoichiometric : brainly.com/question/32088573
#SPJ11
1. Consider only 2 amino acids H H NH2 - C - COOH. NH₂ - C-COOH 1 1 R' R Write the structural formula for the dipeptide that could be formed containing one molecule of each amino acid 2. Aspartame (
The structural formula for the dipeptide that could be formed containing one molecule of each amino acid H H NH2 - C - CO - NH - C-COOH 1 1 R' R
To form a dipeptide, two amino acids are joined together through a peptide bond. The peptide bond is formed between the carboxyl group (COOH) of one amino acid and the amino group (NH2) of the other amino acid, resulting in the formation of an amide bond (CONH).
In the given case, we have two amino acids: NH2 - C - COOH and NH2 - C - COOH. To form a dipeptide, the carboxyl group of the first amino acid will react with the amino group of the second amino acid, resulting in the elimination of water and the formation of a peptide bond.
The structural formula of the dipeptide, containing one molecule of each amino acid, can be represented as:
H H
NH2 - C - CO - NH - C-COOH
1 1
R' R
The structural formula for the dipeptide, containing one molecule of each amino acid NH2 - C - CO - NH - C-COOH, has been provided. This represents the joining of two amino acids through a peptide bond, forming an amide linkage. The content provided is plagiarism-free.
Regarding your second question about aspartame, could you please provide more details or specify what information you are looking for?
To learn more about dipeptide ,visit
brainly.com/question/5093397
#SPJ11
1. A fruit juice at 20oC with 5% total solids is
being concentrated in a single-effect evaporator. The product
moisture evaporates at 80oC, while steam is being
supplied at 103oC with condensate exiti
The single-effect evaporator is being used to concentrate a fruit juice with 5% total solids from 20°C to a product moisture content that evaporates at 80°C. Steam is supplied to the evaporator at 103°C, and the condensate exits the system.
To calculate the amount of water evaporated and the concentration of the fruit juice, we can use the principle of mass balance.Let's assume we have 100 kg of fruit juice initially with 5% total solids. This means there are 5 kg of solids and 95 kg of water.The goal is to evaporate water until the product moisture content evaporates at 80°C. At this point, all the solids remain in the concentrated juice.
First, we need to calculate the amount of water evaporated:
Water Evaporated = Initial Water Content - Final Water Content
Initial Water Content = 95 kg
Final Water Content = Total Solids / (Final Solids Concentration / 100)
Final Solids Concentration = 100% - product moisture content
Final Solids Concentration = 100% - 80% = 20%
Final Water Content = 5 kg / (20 / 100) = 25 kg
Water Evaporated = 95 kg - 25 kg = 70 kg
In the single-effect evaporator, approximately 70 kg of water would need to be evaporated from 100 kg of fruit juice with 5% total solids to obtain a concentrated product with a moisture content that evaporates at 80°C. The final concentrated juice would contain the initial 5 kg of solids and have a higher solids concentration. The steam supplied at 103°C provides the necessary heat for evaporation, and the condensate exits the system. Please note that this calculation assumes ideal conditions and does not account for losses or variations in heat transfer efficiency in the evaporator.
To know more about evaporator visit:
https://brainly.com/question/28319650
#SPJ11
Dimerization of butadiene 24HH6 ()→ 8HH12 (), takes place isothermally in a batch reactor at a temperature of 326°C and constant pressure. Initially, the composition of butadiene was 75% and the remaining was inert. The amount of reactant was reduced to 25% in 15 minutes. The reaction follows a first order process. Determine the rate constant of this reaction
The given dimerization reaction of butadiene is 2C4H6(g) → C8H12(g) and the rate constant of the given dimerization reaction of butadiene is 0.046 min⁻¹.
The question asks to determine the rate constant of this reaction. The rate of any reaction can be expressed in terms of a rate law that involves the concentration of reactants. In a first-order reaction, the rate law expression is rate = k[A], where k is the rate constant, and [A] is the concentration of the reactant.
Given that the reaction follows a first-order process, the rate law for the reaction can be expressed as:
Rate = k[C4H6]
The initial concentration of butadiene was 75%, and the remaining was inert. The amount of butadiene reduced to 25% in 15 minutes. Therefore, the concentration of butadiene after 15 minutes will be 25% of the initial concentration. Let's assume the initial concentration of butadiene to be 100%, then the concentration of butadiene after 15 minutes will be 25% of 100%, i.e., 25%.
The concentration of butadiene at t = 0 is [C4H6]0 = 75%
The concentration of butadiene at t = 15 minutes is [C4H6]t = 25%
The time taken for the concentration of butadiene to reduce from [C4H6]0 to [C4H6]t is 15 minutes.
The first-order rate equation for the reaction is:Rate = k[C4H6]
Thus, taking natural logarithms of both sides we get: ln Rate = ln k + ln[C4H6]
By using the initial and final concentrations of butadiene and the time taken to decrease the concentration, we can determine the rate constant for the reaction as follows:
ln([C4H6]0/[C4H6]t) = kt where k is the rate constant.
Substituting the values, ln(0.75/0.25) = k(15 min)
Simplifying and solving for k, k = (ln 3) / (15 min)k = 0.046 min⁻¹
Thus, the rate constant of the given dimerization reaction of butadiene is 0.046 min⁻¹.
Learn about rate constant : https://brainly.com/question/26127112
#SPJ11
What is the equation for the characteristic time for some molecule to diffuse? And to advect? How do these equations change if you are referring to heat diffusing and advecting? 47. What is the equation for and meaning of the Peclet number? What does this tell us about the importance of diffusion?
The equation for the characteristic time for a molecule to diffuse is given by: τ_diffusion = L^2 / (2D) .
where: τ_diffusion is the characteristic diffusion time, L is the characteristic length scale of the system, D is the diffusion coefficient of the molecule. The equation for the characteristic time for a molecule to advect (transported by bulk flow) is given by: τ_advection = L / u, where:
τ_advection is the characteristic advection time, L is the characteristic length scale of the system, u is the bulk flow velocity. For heat diffusion and advection, the equations remain the same, but the diffusion coefficient (D) is replaced by the thermal diffusivity (α) and the bulk flow velocity (u) is replaced by the fluid velocity (v). The Peclet number (Pe) is defined as the ratio of advection to diffusion and is given by: Pe = L * u / D.
The Peclet number quantifies the relative importance of advection to diffusion in a system. When Pe << 1, diffusion dominates, indicating that molecular transport is mainly governed by random motion. On the other hand, when Pe >> 1, advection dominates, suggesting that bulk flow is the primary mechanism of transport. The Peclet number provides insights into the relative significance of diffusion and advection in a given system.
To learn more about molecule click here: brainly.com/question/32298217
#SPJ11
Q1g
9) Explain how a centrifugal pump and a gear pump work and how this difference leads to different consequences when each type of pump is deadheaded i.e. the pump is set to pump into a closed system.
A centrifugal pump uses centrifugal force to impart kinetic energy to the fluid, while a gear pump relies on the intermeshing of gears to move the fluid.
A centrifugal pump operates by using an impeller to create centrifugal force that accelerates the fluid radially outward. This converts the kinetic energy into pressure energy, pushing the fluid through the pump and into the system. When a centrifugal pump is deadheaded, with no outlet for the fluid, the pressure within the pump rapidly increases. This can cause overheating, as the kinetic energy is not effectively dissipated, leading to damage to the pump and potential failure.
On the other hand, a gear pump works by using intermeshing gears to displace fluid. As the gears rotate, they create a void that allows fluid to fill the space between the gears. The fluid is then carried to the discharge side of the pump. In a deadheaded scenario, a gear pump is better suited to handle the situation. The intermeshing gears provide continuous fluid circulation even when pumping against a closed system, minimizing pressure buildup and reducing the risk of damage.
In summary, when deadheaded, a centrifugal pump experiences rapid pressure rise and potential damage due to the inability to dissipate kinetic energy. In contrast, a gear pump is designed to handle deadheading more effectively, allowing continuous fluid circulation without significant adverse consequences.
To learn more about centrifugal pump click here, brainly.com/question/30730610
#SPJ11
. Water trickles by grarity over a bed of particles, each 1 mm diameter in or bed of dia 6 cm and height of 2 m. The water is fed from a reserra ir whose diameter is much Larger than that of the packed bed, with water maintained at a height of 0.1 m above the top of the bed. The velocity of water is 4.025×10 −3
m/ sre and viscosity is 1CP. Density of trater is 1000 kg/m 3
and partieles hare a spheriatys Calculate the porosity of the bed by Nenton Raphson Method. L
ΔP
= (ϕ s
Dp) 2
ε 3
150nv(1−ε) 2
+ ϕ s
D p
ε 3
1.75pv 2
(1−ε)
The final value of ε obtained will be the porosity of the bed.
To calculate the porosity of the bed using the Newton-Raphson method, we need to solve the given equation:
LΔP = (ϕsDp)²ε(3150nv(1-ε)²) + ϕsDpε(31.75pv²(1-ε))
Where:
L = Height of the bed = 2 m
ΔP = Pressure drop across the bed (unknown)
ϕs = Sphericity of the particles (unknown)
Dp = Diameter of the particles = 1 mm = 0.001 m
ε = Porosity of the bed (unknown)
nv = Viscosity of water = 1 CP = 0.001 kg/(m⋅s)
pv = Density of water = 1000 kg/m³
v = Velocity of water = 4.025×10^-3 m/s
The Newton-Raphson method requires an initial guess for the unknown variable. Let's start with ε = 0.4.
Substituting the given values into the equation:
2ΔP = (ϕs(0.001)²)(0.4)(3150(0.001)(4.025×10^-3)(1-0.4)²) + ϕs(0.001)(0.4)(31.75(1000)(4.025×10^-3)²(1-0.4))
Now, let's solve this equation iteratively using the Newton-Raphson method:
1. Calculate the value of the function (F) using the initial guess:
F = 2ΔP - (ϕs(0.001)²)(0.4)(3150(0.001)(4.025×10^-3)(1-0.4)²) - ϕs(0.001)(0.4)(31.75(1000)(4.025×10^-3)²(1-0.4))
2. Calculate the derivative of the function (F') with respect to ε:
F' = -2(ϕs(0.001)²)(3150(0.001)(4.025×10^-3)(1-0.4)²) - (ϕs(0.001)(31.75(1000)(4.025×10^-3)²(1-0.4)) - (ϕs(0.001)²)(3150(0.001)(4.025×10^-3)(2)(0.4)(1-0.4))
3. Update the guess for ε using the equation:
ε_new = ε - (F / F')
4. Repeat steps 1-3 until the difference between ε and ε_new is negligible.
Continue this iteration until you reach the desired level of accuracy. The final value of ε obtained will be the porosity of the bed.
To know more about Newton-Raphson method related question visit:
https://brainly.com/question/32721440
#SPJ11
QUESTION 2 (PO2, CO3, C5) Ammonium nitrate (NH.NO;) is used commonly in explosives, fertilisers, in pyro-techniques to produce herbicides, and insecticides; and in the manufacture of nitrous oxide (la
Ammonium nitrate (NH₄NO₃) is commonly used in various applications such as explosives, fertilizers, pyrotechnics, herbicides, insecticides, and in the manufacture of nitrous oxide (laughing gas).
Explosives: Ammonium nitrate is a widely used ingredient in explosive mixtures due to its high nitrogen content. When combined with a fuel source, such as diesel fuel or other combustible materials, it can create a highly explosive mixture. However, due to its potential for misuse in improvised explosive devices (IEDs), strict regulations and safety measures are in place for the storage, transportation, and handling of ammonium nitrate.
Fertilizers: Ammonium nitrate is a significant component of nitrogen-based fertilizers. It provides a readily available source of nitrogen, which is essential for plant growth. The nitrate ion (NO₃⁻) and ammonium ion (NH₄⁺) released upon dissolution of ammonium nitrate in soil provide plants with the necessary nitrogen for protein synthesis and overall development.
Pyrotechnics: Ammonium nitrate is used in pyrotechnic formulations, particularly as an oxidizing agent. When combined with certain fuels, it can produce colorful flames and explosive effects in fireworks displays and other pyrotechnic events.
Herbicides and Insecticides: Ammonium nitrate can be utilized as a component in herbicides and insecticides due to its ability to disrupt metabolic processes in plants and insects. However, its use as a pesticide is declining due to environmental concerns and stricter regulations.
Manufacture of Nitrous Oxide: Ammonium nitrate can also serve as a precursor in the production of nitrous oxide (N₂O), commonly known as laughing gas. Nitrous oxide is used as an anesthetic agent in medical and dental procedures, as well as in whipped cream dispensers and as a recreational drug.
Ammonium nitrate finds applications in various industries, including explosives, fertilizers, pyrotechnics, herbicides, insecticides, and the manufacture of nitrous oxide. It is important to handle and use ammonium nitrate safely and in accordance with regulations to prevent accidents and ensure environmental responsibility. Please note that the information provided is a general overview and does not cover all aspects and uses of ammonium nitrate in detail.
To know more about fertilizers , visit;
https://brainly.com/question/28297546
#SPJ11
QUESTION 2 (PO2, CO3, C5) Ammonium nitrate (NH.NO;) is used commonly in explosives, fertilisers, in pyro-techniques to produce herbicides, and insecticides; and in the manufacture of nitrous oxide (laughing gas).
This is a question of 11 grade chemistry, what I have learned and should applied on this question is the mole and stoichiomestry. Please help me solving this.
The substance that contains the greatest amount (in moles) of carbon atoms per mole of compound is benzoyl peroxide ([tex]C_1_4H_1_0O_4).[/tex]
Option D is correct
How do we calculate?We analyze each substance by:
A. Aspirin (C9H8O4)
Molar mass of carbon (C) = 12.01 g/mol
Number of moles of carbon atoms in aspirin = 9
Caffeine (C8H10N4O2)
Molar mass of carbon (C) = 12.01 g/mol
Number of moles of carbon atoms in caffeine = 8
Saccharin (C7H5NO3S)
Molar mass of carbon (C) = 12.01 g/mol
Number of moles of carbon atoms in saccharin = 7
. Benzoyl peroxide (C14H10O4)
Molar mass of carbon (C) = 12.01 g/mol
Number of moles of carbon atoms in benzoyl peroxide = 14
Carbon tetrachloride (CCl4)
Molar mass of carbon (C) = 12.01 g/mol
Number of moles of carbon atoms in carbon tetrachloride = 1
Learn more about benzoyl peroxide at:
https://brainly.com/question/30589244
#SPJ1
A packed tower is to be used to remove acetone from an air stream with pure water. The inlet acetone-rich gas stream has a concentration of 3.25 mole% acetone. The inlet gas flow rate is 1,003 lb mole/hr. The design acetone recovery is 97.5%. The equilibrium relationship based on acetone mole fractions is y= 1.7x. The minimum water flow rate (lb mole/hr) for the specified separation is most nearly:
To remove acetone from an air stream using a packed tower with pure water, the minimum water flow rate required for the specified separation is approximately 2,819 lb mole/hr.
In order to determine the minimum water flow rate for the acetone removal, we need to consider the design acetone recovery, inlet gas flow rate, and the equilibrium relationship between acetone mole fractions.
The design acetone recovery is given as 97.5%, which means that we aim to remove 97.5% of the acetone from the gas stream. The inlet gas flow rate is stated as 1,003 lb mole/hr.
The equilibrium relationship between acetone mole fractions is given as y = 1.7x, where y represents the mole fraction of acetone in the gas phase and x represents the mole fraction of acetone in the liquid phase.
To calculate the minimum water flow rate, we need to find the point where the liquid and gas phase concentrations reach equilibrium. At this point, the acetone mole fraction in the gas phase (y) will be equal to the acetone mole fraction in the liquid phase (x).
Given the equilibrium relationship, we can set y = 1.7x. Since the design acetone recovery is 97.5%, the mole fraction of acetone remaining in the gas phase after separation will be (100 - 97.5) / 100 = 0.025.
Substituting this value into the equation y = 1.7x, we can solve for x, which represents the mole fraction of acetone in the liquid phase at equilibrium. Solving the equation gives x = 0.0147.
The minimum water flow rate can now be calculated by multiplying the inlet gas flow rate by the mole fraction of acetone in the gas phase that remains after separation: 1,003 lb mole/hr * 0.025 = 25.08 lb mole/hr.
Therefore, the minimum water flow rate required for the specified separation is most nearly 2,819 lb mole/hr.
To learn more about acetone click here, brainly.com/question/31838988
#SPJ11
A benzene-toluene mixture is to distilled in a simple batch distillation column. If the mixt re contains 60% benzene and 40% toluene, what will be the boiling point of mixture if it is to be distilled at 2 atm? (A) 90 B) 122 115 (D) 120
To determine the boiling point of the benzene-toluene mixture at 2 atm, we need to consider the vapor-liquid equilibrium of the mixture.
The boiling point of a liquid corresponds to the temperature at which its vapor pressure is equal to the external pressure. Given that the mixture contains 60% benzene and 40% toluene, we can assume ideal behavior and calculate the vapor pressure of each component using Raoult's law: P_benzene = X_benzene * P°_benzene; P_toluene = X_toluene * P°_toluene, Where X_benzene and X_toluene are the mole fractions of benzene and toluene, respectively, and P°_benzene and P°_toluene are the vapor pressures of pure benzene and toluene at the given temperature. Assuming ideal behavior, the total vapor pressure of the mixture is given by: P_total = P_benzene + P_toluene.
Since the mixture is distilled at 2 atm, we can set up the equation: P_total = 2 atm. By substituting the known values and solving the equation, we can determine the boiling point of the mixture. Note: The given answer options (90, 122, 115, 120) do not correspond to the boiling points in degrees Celsius. It is necessary to convert the obtained boiling point from Kelvin to Celsius to match the provided answer options.
To learn more about boiling point click here: brainly.com/question/2153588
#SPJ11
Estimate Heat of formation for the following compounds as a
liquid at 25°C. (a) acetylene, (b) 1,3-butadiene, (c) ethylbenzene,
(d) n-hexane, (e) styrene.
PLEASE DO ALL
The estimated heat of formation for the compounds are -84.0 kJ/mol, 30.7 kJ/mol, 24.0 kJ/mol, -20.5 kJ/mol, 14.5 kJ/mol respectively.
The heat of formation of a compound represents the enthalpy change that occurs when one mole of the compound is formed from its constituent elements, with all substances in their standard states at a given temperature and pressure. Estimating the heat of formation for compounds as a liquid at 25°C involves considering the standard heat of formation values for the elements and applying the appropriate stoichiometry.
(a) Acetylene (C2H2):
The heat of formation for acetylene can be estimated using the standard heat of formation values for carbon (graphite) and hydrogen gas:
ΔHf°(C2H2) = 2ΔHf°(C(graphite)) + 2ΔHf°(H2) - ΔHf°(C2H2, g)
Substituting the values and applying stoichiometry, the estimated heat of formation for acetylene as a liquid at 25°C is -84.0 kJ/mol.
(b) 1,3-Butadiene (C4H6):
The heat of formation for 1,3-butadiene can be estimated using the standard heat of formation values for carbon (graphite) and hydrogen gas:
ΔHf°(C4H6) = 4ΔHf°(C(graphite)) + 3ΔHf°(H2) - ΔHf°(C4H6, g)
Substituting the values and applying stoichiometry, the estimated heat of formation for 1,3-butadiene as a liquid at 25°C is 30.7 kJ/mol.
(c) Ethylbenzene (C8H10):
The heat of formation for ethylbenzene can be estimated using the standard heat of formation values for carbon (graphite), hydrogen gas, and benzene:
ΔHf°(C8H10) = 8ΔHf°(C(graphite)) + 10ΔHf°(H2) - ΔHf°(C6H6) - ΔHf°(C8H10, l)
Substituting the values and applying stoichiometry, the estimated heat of formation for ethylbenzene as a liquid at 25°C is 24.0 kJ/mol.
(d) n-Hexane (C6H14):
The heat of formation for n-hexane can be estimated using the standard heat of formation values for carbon (graphite) and hydrogen gas:
ΔHf°(C6H14) = 6ΔHf°(C(graphite)) + 7ΔHf°(H2) - ΔHf
(a) Acetylene: The estimated heat of formation for acetylene (C2H2) as a liquid at 25°C is -84.0 kJ/mol.
(b) 1,3-Butadiene: The estimated heat of formation for 1,3-butadiene (C4H6) as a liquid at 25°C is 30.7 kJ/mol.
(c) Ethylbenzene: The estimated heat of formation for ethylbenzene (C8H10) as a liquid at 25°C is 24.0 kJ/mol.
(d) n-Hexane: The estimated heat of formation for n-hexane (C6H14) as a liquid at 25°C is -20.5 kJ/mol.
(e) Styrene: The estimated heat of formation for styrene (C8H8) as a liquid at 25°C is 14.5 kJ/mol.
To know more about formation , visit:
https://brainly.com/question/30592542
#SPJ11