A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500. Liquid hexane condensate is recovered at a rate of 1.50 L/min. (a) What is the flow rate of the gas stream leaving the condenser in mol/min? (Hint : First calculate the molar flow rate of the condensate and note that the rates at which C6H14 and N2 enter the unit must equal the total rates at which they leave in the two exit streams.) (b) What percentage of the hexane entering the condenser is recovered as a liquid?

Answer:

$1,783,805

Explanation:

Okay, if we are going to answer thus question efficiently, we need to take time to understand each and every sentence in the question. Hence, from the question we have the following data or information and they are;

1. The initial deposit in which Juan deposited on his 26th birthday = $7500.

2. After the statement in [1] above, Juan decided to be depositing $1000 more than the one he deposited on his 26th birthday.

Therefore, we are given that there is 5% in the interest rate. Thus, after his thirty-fifth deposit he will have;

$7500[90.3203] + [5.516] × $1000 × 200.581] = $1,783,805

Answer:

what are you in third grade??

Explanation:

the answer is  the air pressure inside of the bottle reaches the same air pressure as outside of the bottle. K?? got it love???I hope soo

Answer:

the air pressure inside of the bottle reaches the same air pressure as outside of the bottle.

Explanation:

Answer:

V= 90h cm³ where h is the height of the rectangular prism.

Explanation:

The formula for volume of a rectangular prism is ;

V=l*w*h  where;

V=volume in cm³

l= length of prism=10cm

w =width of the prism = 9 cm

Assume the height of the prism as h cm then the volume will be;

V= 10* 9*h

V= 90h cm³

when the value of height of the prism is given, substitute that value with h to get the actual volume of the prism.

Answer:

The torque at the end of the beam is 2.5 Nm

Explanation:

Given;

length of beam, r = 0.5 m

applied force, F = 5 N

The torque at the end of the beam is given by;

τ = F x r

where;

τ  is the torque

F is applied force

r is length of the beam

τ = 5 x 0.5

τ = 2.5 Nm

Therefore, the torque at the end of the beam is 2.5 Nm

Complete question is;

Annealing is a process by which steel is reheated and then cooled to make it less brittle. Consider the reheat stage for a 100 mm thick plate (ρ = 7830 kg/m3, Cp = 550 J/kg K, k = 48 W/m K). The plate initially is at 200 °C and is to be heated to a minimum temperature of 550 °C. Heating is effected in a gas-fired furnace where the products of combustion at T∞ = 800 °C maintain a convection heat transfer coefficient of h = 250 W/m.K on both surfaces of the plate. How long should the plate be left in the furnace?

Answer:

860 seconds

Explanation:

We are given;

Initial Temperature; Ti = 200 °C

Minimum Temperature; T_i = 550 °C

T∞ = 800 °C

convection coefficient; h = 250 W/m².K

ρ = 7830 kg/m³

Cp = 550 J/kg K

k = 48 W/m K

Plate thickness = 100mm

Thus,L = 100/2 = 50mm = 0.05 m

Let's find the biot number from the formula;

Bi = hL/K

Bi = (250 × 0.05)/48

Bi = 0.2604

Now, lowest temperature in the slab is given as;

θ_o = (T_o - T∞)/(T_i - T∞)

θ_o = (550 - 800)/(200 - 800)

θ_o = 0.4167

Now, from online tables calculation, we can find the root of the biot number.

Thus, root of the biot number Bi = 0.2604 is;

ζ1 = 0.488 rad

Also, C1 is gotten as 1.0396

Now,formula for thermal diffusivity is;

α = k/ρc

α = 48/(7830 × 550)

α = 1.115 × 10^(-5) m²/s

Also, from online tables, f(ζ1) = 0.401

Thus, we can find the time the plate should the plate be left in the furnace from;

-(ζ1)²(αt/L²) = In 0.401

-(ζ1)²(αt/L²) = -0.9138

t = (-0.9138 × 0.05²)/-(0.488² × 1.115 × 10^(-5))

t ≈ 860 s

In this exercise we want to calculate the time, in seconds, of the time left on the plate in the furnace, like this:

860 seconds

Organizing the information given in the statement we find that:

Using the formula given below, we will have how to calculate the number of biot, like this:

[tex]B = hL/K\\B = (250 * 0.05)/48\\B = 0.2604[/tex]

calculating the angle that corresponds to the temperature difference as:

[tex]\theta_o = (T_o - T)/(T_i - T)\\\theta_o = (550 - 800)/(200 - 800)\\\theta_o = 0.4167[/tex]

Using the formula below, we will have:

[tex]\alpha = k/\rho c\\\alpha = 48/(7830 * 550)\\\alpha = 1.115 * 10^{-5}[/tex]

Combining all the information from the previous calculations, we have that the time will be calculated as:

[tex]-(\phi)^2(\alpha t/L^2) = In 0.401\\-(\phi )^2(\apha t/^2) = -0.9138\\t = (-0.9138 * 0.05^2)/-(0.488^2 * 1.115 * 10^{-5})\\t = 860 s[/tex]

See more about time at brainly.com/question/2570752

Answer:

ben black diyorum ve Iyi srdsler dilerim

#elmaliturta23

Answer:

actually, it was John Doe and Jane Doe, as they were created as testers on the exact same say when Roblox was created.

Explanation:

The first  player was builderman. Option C

The first player was one whose user handle was builderman.

However, the account was terminated. It was replaced with

‘Builderman’ is the account that belonged to the CEO and Co-Founder of , David Baszucki. He manages all of the admins.

When you make a new account, he's automatically your friend.

Note that ‘John Doe’ and ‘Jane Doe’ were two test accounts that were created by David.

The accounts were later rumored to hack others’

Learn about username at: https://brainly.com/question/28344005

#SPJ6

Answer:

  Technician B

Explanation:

In simplistic terms, the "hot wire" connects the load device to the source of electrical energy. The ground wire provides the return path for current from the load device to the energy source. In many circuits, the "ground wire" is at, near, or defined as "ground" potential (the actual potential of the Earth).

Technician A seems to be confused. Technician B is more correct.

Answer:

wat?

Explanation:

The question should be labeled in the psychology section, but what I assume the question means is some sort of paradoxical reverse psychology method of braincell loss. Even photosynthesis doesn't understand what it means. The question probably is what is the question, not that there's no help.

Hope this helps (a little)!

Answer:

The steady rate of heat transfer through the glass window is 707.317 watts.

Explanation:

A figure describing the problem is included below as attachment. From First Law of Thermodynamics we get that steady rate of heat transfer through the glass window is the sum of thermal conductive and convective heat rates, all measured in watts:

[tex]\dot Q_{total} = \dot Q_{cond} + \dot Q_{conv, in} + \dot Q_{conv, out}[/tex] (Eq. 1)

Given that window is represented as a flat element, we can expand (Eq. 1) as follows:

[tex]\dot Q_{total} = \frac{T_{i}-T_{o}}{R}[/tex] (Eq. 2)

Where:

[tex]T_{i}[/tex], [tex]T_{o}[/tex] - Indoor and outdoor temperatures, measured in Celsius.

[tex]R[/tex] - Overall thermal resistance, measured in Celsius per watt.

Now, we know that glass window is configurated in series and overall thermal resistance is:

[tex]R = R_{cond} + R_{conv, in}+R_{conv, out}[/tex] (Eq. 3)

Where:

[tex]R_{cond}[/tex] - Conductive thermal resistance, measured in Celsius per watt.

[tex]R_{conv, in}[/tex], [tex]R_{conv, out}[/tex] - Indoor and outdoor convective thermal resistances, measured in Celsius per watt.

And we expand the expression as follows:

[tex]R = \frac{l}{k\cdot w\cdot d} + \frac{1}{h_{i}\cdot w\cdot d} + \frac{1}{h_{i}\cdot w\cdot d}[/tex]

[tex]R = \frac{1}{w\cdot d}\cdot \left(\frac{l}{k}+\frac{1}{h_{i}}+\frac{1}{h_{o}} \right)[/tex] (Eq. 4)

Where:

[tex]w[/tex] - Width of the glass window, measured in meters.

[tex]d[/tex] - Length of the glass window, measured in meters.

[tex]l[/tex] - Thickness of the glass window, measured in meters.

[tex]k[/tex] - Thermal conductivity, measured in watts per meter-Celsius.

[tex]h_{i}[/tex], [tex]h_{o}[/tex] - Indoor and outdoor convection coefficients, measured in watts per square meter-Celsius.

If we know that [tex]w = 2.4\,m[/tex], [tex]d = 1.5\,m[/tex], [tex]l = 0.006\,m[/tex], [tex]k = 0.78\,\frac{W}{m\cdot ^{\circ}C}[/tex], [tex]h_{i} = 10\,\frac{W}{m^{2}\cdot ^{\circ}C}[/tex] and [tex]h_{o} = 25\,\frac{W}{m^{2}\cdot ^{\circ}C}[/tex], the overall thermal resistance is:

[tex]R = \left[\frac{1}{(2.4\,m)\cdot (1.5\,m)}\right] \cdot \left(\frac{0.006\,m}{0.78\,\frac{W}{m\cdot ^{\circ}C} }+\frac{1}{10\,\frac{W}{m^{2}\cdot ^{\circ}C} }+\frac{1}{25\,\frac{W}{m^{2}\cdot ^{\circ}C} } \right)[/tex]

[tex]R = 0.041\,\frac{^{\circ}C}{W}[/tex]

Now, we obtain the steady rate of heat transfer from (Eq. 2): ([tex]R = 0.041\,\frac{^{\circ}C}{W}[/tex], [tex]T_{i} = -5\,^{\circ}C[/tex], [tex]T_{o} = 24\,^{\circ}C[/tex])

[tex]\dot Q_{total} = \frac{24\,^{\circ}C-(-5\,^{\circ}C)}{0.041\,\frac{^{\circ}C}{W} }[/tex]

[tex]\dot Q_{total} = 707.317\,W[/tex]

The steady rate of heat transfer through the glass window is 707.317 watts.

Answer:false

Explanation:

Bc

Answer:

the first one is the correct answer

Answer:

the first one would be correct

Explanation:

Answer:

A computo is a box and it works really well if its good

Answer:

Shallow foundations, often called footings, are usually embedded about a metre or so into soil. ... Another common type of shallow foundation is the slab-on-grade foundation where the weight of the structure is transferred to the soil through a concrete slab placed at the surface.

Explanation:

Because I said so.

Types; 2 Auto body repair; 3 Auto glass repair; 4 See also; 5 References ... Independent automobile repair shops in the US may also achieve certification through manufacturer sponsored ...