The work done to the mower is the product of force and the distance covered by the object which is equal to 40,811 Joules.
What is Work done?Work done can be defined as the product of external force and the distance over which the force is being applied. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
From this we can see that:
X-Component:
cos(θ) = x/F
Then,
X= F cos(θ).…..(1)
Now putting the values of F and θ in equation (1) we get,
X = 72 N × cos(40)
X = 72 N × 0.766
X= 55.15 N this is the x-component force
The work done to the mower is:
W = F × d
W = 55.15 × 740
W = 40,811 Joules
The work done to the mower is 40811 Joules.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ1
If a Current Current of strength 3A flows through aresistance of 20 om for 10 minutes,then calculate the amount of heat produced in the resistance.
Answer:
1.08 x 10^5 J
Explanation:
First, apply the formula V = IR , where V is the voltage, I is the current and R is the resistance.
R -> 20 ohm (Given)
I -> 3A (Given)
Hence, V = 3 x 20 = 60V (60 volts)
Next, apply the formula E = Pt , where E is the energy produced, P is the power and t is the time in seconds
Furthermore, since P = IV (power = current x voltage)
The formula can be re-expressed as E = VIt
t -> 10 minutes = 600 seconds (don't forget to convert time to seconds!)
Therefore, energy = (60 x 3 x 600) J
= 108000 J
= 1.08 x 10^5 J (in scientific notation)
Hea produced in the resistance = energy produced in the resistor
= 1.08 x 10^5 J
URGENT HELP!
How is it that two moving objects can have a net momentum of zero?
Answer:
because they may not actually be moving be just percieved as so
Explanation:
Answer:
i think that maybe there arent moving but there on something thats moving
Explanation:
What are the 3 Laws of Newtonian Mechanics
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction
Answer:
(1) Every object moves in a straight line unless acted upon by a force
(2) The acceleration of an object is directly proportional to the net force exerted and inversely proportional to the object's mass.
(3) For every action, there is an equal and opposite reaction.
Explanation:
Examples of Newton's 3rd Law When you jump off a small rowing boat into water, you will push yourself forward towards the water. The same force you used to push forward will make the boat move backwards. When air rushes out of a balloon, the opposite reaction is that the balloon flies up
A ray of light has a wavelength of
284 nm in glass (n = 1.51). What
is its wavelength in a vacuum?
Answer:
The wavelength in vacuum is equal to 428.8 nm.
Explanation:
Given that,
The wavelength of light, [tex]\lambda=284\ nm[/tex]
The refractive index of glass, n = 1.51
We need to find the wavelength in vacuum. The relation between wavelength and refractive index is given by :
[tex]n=\dfrac{\lambda_v}{\lambda}\\\\\lambda_v=n\times \lambda\\\\\lambda_v=1.51\times 284\\\\\lambda_v=428.8\ nm[/tex]
So, the wavelength in vacuum is equal to 428.8 nm.
In a particular crash test, an automobile of mass 1759 kg collides with a wall and bounces back off the wall. The x components of the initial and final speeds of the automobile are 12 m/s and 2.2 m/s, respectively. If the collision lasts for 0.11 s, find the magnitude of the impulse due to the collision. Answer in units of kg · m/s. Calculate the magnitude of the average force exerted on the automobile during the collision. Answer in units of N.
Based on the data provided about the collision;
the magnitude of the impulse due to the collision is 21105.8 kg.m/sthe magnitude of the average force exerted on the automobile during the collision is 191870.91 NWhat is the magnitude of the impulse due to the collision of the vehicle with the wall?The magnitude of the impulse due to the collision of the vehicle with the wall is calculated using the formula of the impulse on an object given below as follows:
Impulse = change in momentum
Change in momentum = m(v - u)
where;
m is mass
v is the final velocity
u is the initial velocity
Impulse = 1759 (12 - 22)
Impulse = 21105.8 kg.m/s
The average force on the automobile will be:
Force = impulse/time
Force = 21105.8 / 0.11
Force = 191870.91 N
Learn more about force and impulse at: https://brainly.com/question/20586658
#SPJ1
The reliability or reproducibility of a measurement is its _____
The degree of data stability when the measurement is replicated under identical circumstances is known as reproducibility or reliability.
What exactly are repeatability and reproducibility?Reproducibility determines how an entire study an experiment can be replicated, whereas repeatability assesses the variation in data made by a single equipment or human under similar circumstances.
What makes repeatability crucial?Science needs reproducibility because it enables more in-depth investigation, and replication validates our findings. There are several investigations and experiments, which result in a wide range of variables, unforeseen, and things that are either outside your influence or you cannot guarantee.
To knw more about measurement visit:
https://brainly.com/question/2107310
#SPJ1
A laser beam is incident on two slits with a separation of 0.180 mm, and a screen is placed 5.05 m from the slits. If the bright interference fringes on the screen are separated by 1.62 cm, what is the wavelength of the laser light
Answer:
The answer is "530 nm".
Explanation:
[tex]d=0.180 \ nm=0.180 \times 10^{-3} \ m\\\\L= 5.05\ m\\\\\Delta y= 1.62\ cm= 1.62 \times 10^{-2} \ m\\\\[/tex]
Using formula:
[tex]\Delta y=\frac{\lambda L}{d}\\\\\lambda =\frac{d\Delta y}{L}\\\\[/tex]
[tex]=\frac{0.180 \times 10^{-3} \times 1.62 \times 10^{-2} }{5.05}\\\\=5.30 \times 10^{-9} \times \frac{1 \ nm}{10^{-9} \ m}\\\\=530 \ nm[/tex]
What characteristics determine how easily two substances change temperature
Answer;
Amount of time the two substances are in contact
Area in contact between the two substances
Specific heat of the material that makes up the substances
Explanation;
The change in temperature of a substance is caused by heat energy. The change in temperature will depend on factors such as mass of the substance, the type of material it is made from, the time taken , specific heat of the material that makes the substance, and also the area of contact.
The amount of time the two substances are in contact affect the change in temperature such that if the two bodies are in contact for a longer time then a bigger change in temperature will be observed.
Specific heat capacity also determines the change in temperature that will be observed, such that a substance with a bigger specific heat capacity will record a small change in temperature.
While skiing in Jackson, Wyoming, your friend Ben (of mass 63.2 kg) started his de- scent down the bunny run. 11.5 m above the bottom of the run. If he started at rest and converted all of his gravitational potential energy into kinetic energy, what is Ben's kinetic energy at the bottom of the bunny run? Use g = 9.8 m/s Answer in units of J.
Answer:
Approximately [tex]7.1 \times 10^{3}\; {\rm J}[/tex] (given: [tex]g = 9.8\; {\rm m\cdot s^{-2}}[/tex].)
Explanation:
To find the change in the gravitational potential energy ([tex]\text{GPE}[/tex]), use the formula:
[tex]\begin{aligned}& (\text{change in GPE}) \\ &= (\text{mass})\, (g)\, (\text{change in height})\end{aligned}[/tex].
Assume that gravitational field strength [tex]g[/tex] is constant (e.g., [tex]g = 9.8\; {\rm m\cdot s^{-2}}[/tex].) For an object of mass [tex]m[/tex], if the altitude of the object changes by [tex]\Delta h[/tex], the [tex]\text{GPE}[/tex] of that object would change by [tex]m\, g\, \Delta h[/tex].
In this question, the mass of Ben is [tex]m = 63.2\; {\rm kg}[/tex]. It is given that [tex]g = 9.8\; {\rm m\cdot s^{-2}} = 9.8\; {\rm N\cdot kg^{-1}}[/tex] and is constant. Since change in the altitude of Ben is [tex]\Delta h = 11.5\; {\rm m}[/tex], the change in the ([tex]\text{GPE}[/tex]) of Ben would be:
[tex]\begin{aligned} m\, g\, \Delta h &= (63.2\; {\rm kg}) \, (9.8\; {\rm N\cdot kg^{-1}})\, (11.5\; {\rm m}) \\ &\approx 7.1\times 10^{3}\; {\rm N\cdot m} = 7.1\times 10^{3}\; {\rm J} \end{aligned}[/tex].
What two pigments would be subtracted to reflect a red object?
a. yellow and magenta
b. magenta and cyan
c. green and blue
d. cyan and red
Why do nuclear power plants use fission rather than fusion to generate
electric energy?
A. Fusion requires very high pressure and temperature.
B. A problem might lead to an explosion in a fusion reactor, but not
in a fission reactor.
C. The isotope used in fission is more common than the one used
in fusion.
D. Fission produces less radioactive waste than fusion does.
Answer:
A. FUSION REQUIRES VERY HIGH PRESSURE AND TEMPERATURE
Explanation:
Fission is used in nuclear power reactors since it can be controlled, while fusion is not utilized to produce power since the reaction is not easily controlled and is expensive to create the needed conditions for a fusion reaction.
Nuclear Power Plants uses Nuclear Fission over Nuclear Fusion to generate electric energy because "Nuclear Fusion requires very high pressure and temperature".
What is Nuclear Fission?Nuclear fission is a reaction in which the nucleus of an atom splitting into two or more smaller nuclei and this process produces gamma photons and releases large amount of energy by the energetic standards of radioactive decay.
The Nuclear Fission process was discovered by Hahn, Strassman and Meitner in 1938.
What is Nuclear Fusion?Nuclear Fusion is a reaction in which two or more Atomic Nuclei are combined together to form one or more different atomic nuclei and subatomic particle.
The difference in mass between the reactants and products is manifested as either the release or the absorption of energy.
Robert Atkinson and Fritz Houtermans in 1929 measured masses of light elements to show that large amounts of energy could be used released by fusing small nuclei.
Nuclear Fusion cant be used as a source of energy for heat and electricity generation because developing technology for the required purpose is the subject of ongoing research which is at its nascent stage because to reach to Nuclear Fusion , one requires very high pressure and temperature and to reach such point in one closed area is quite a herculean task.
But Scientists are working towards Nuclear Fusion as it is more advantageous over Nuclear Fission and less pollutant.
Therefore, the correct answer will be option (A)
To learn more about Nuclear Fission or Fusion here
https://brainly.com/question/913303
#SPJ2
After Victor returns to the house in chapters 21-continuation of Frankenstein, he looks out the window and sees the monster standing outside grinning. How does Victor react
to seeing him?
A. He invites him in to have a talk.
B. He runs outside to embrace him.
C. He draws his pistol and shoots at him.
Victor reacts when he sees him and threatens to call the police if he doesn't leave. Therefore, choice C is correct.
How does Frankenstein play out?When the court learns of Victor's residence on the Orkney Islands, Kirwin presents a compelling defense of Victor at the trial and is successful in securing Victor's release. Victor's absence from his lab in the Orkneys at the time of the murder is evidence that he did not commit the crime. Victor is taken home by Alphonse.
At the conclusion of Frankenstein, what happens to Victor?Victor Frankenstein wishes he could kill the monster he created when he dies in Frankenstein. Frankenstein is visited by the Monster. He informs Walton that he intends to kill himself and expresses regret for the murders he has committed.
To learn more about Victor Frankenstein here:
https://brainly.com/question/21437674
#SPJ1
Full Question = After Victor returns to the house in chapters 21-continuation of Frankenstein, he looks out the window and sees the monster standing outside grinning. How does Victor react
to seeing him?
A. He invites him in to have a talk.
B. He draws his pistol and shoots at him.
C. He threatens to call the police if he doesn't go away.
D. He runs outside to embrace him.
A force of 7.36 N acts on a(n) 2.1 kg object for 24.7 s. What is the object’s change in momentum? What is its change in velocity? Answer in units of N · s
Based on the data given:
the change in momentum of the object is 181.8 N.sthe change in velocity, Δv = 86.6 m/sWhat is the change in the momentum of a body?
The change in momentum of the object equals the impulse experienced by the object
Mathematically,
Impulse = change in momentum
Impulse = F • t
change in momentum = m • Δ v
F • t = m • Δ v
where
F is the force
t is the time the force acts
m is the mass of the object
Δv is the change in velocity
For the given values:
change in momentum of the object = 7.36 * 24.7
change in momentum = 181.8 N.s
Change in velocity, Δv = change in momentum / mass
Change in velocity, Δv = 181.8 / 2.1
Change in velocity, Δv = 86.6 m/s
Learn more about change in momentum at: https://brainly.com/question/20363811
#SPJ1
Magnetism Assessment
Magnet A is a very weak magnet and Magnet B is a very strong magnet. They attract each other. The relative attractive force is
greater from magnet A
greater from magnet B
the same for both magnets
unable to be determined
1
2
3
4
5
6
7
8
9
Answer:
greater from magnet B to A
The relative attractive force is greater for magnet B and the magnetic force is also greater for magnet B
What is magnetic force?Magnetic force is the term used to describe the force that pulls items like iron. Magnetic force is the attraction or repellence that exists between two magnetic materials. Ferromagnetic materials include iron.
The magnetic force is strongest at the poles of the magnet and weak at the center of the magnet. The magnetic force can be either attractive or repulsive and like poles repel each other whereas unlike poles attracts.
Given data ,
Let the first magnet be = A
Let the second magnet be = B
Now , the Magnet A is a very weak magnet and Magnet B is a strong magnet
And , the magnets A and B attract each other so they are unlike magnets
Since , the magnet B is a strong magnet it will gave a relatively larger attractive force when compared to the weak magnet A
Hence , the magnet B will have greater magnetic force
To learn more about magnetic force click :
https://brainly.com/question/3160109
#SPJ6
Which kind of kinetic energy is a rolling ball?
Someone is trying to balance a (110cm) plank with certain forces.
a) Calculate the moment of the 60N force (about O), then name its type.
b) Calculate the moment of the 30N force (about O), then name its type
c) Will the plank balance? If not, which way will it tip?
d) What extra force would be needed at (B) to balance the plank?
Answer:
a. i. 30 Nm ii. This moment is a clockwise positive moment.
b. i. 15 Nm ii, This moment is a counter-clockwise negative moment.
c. i. The plank will not balance. ii. The plank would tip up.
d. 150 N
Explanation:
a) Calculate the moment of the 60N force (about O), then name its type.
i. Calculate the moment of the 60N force (about O)
Since moment = Force × perpendicular distance from point of moment ,
M = Fd
Since F = 60 N and d = 50 cm = 0.5 m
M = 60 N × 0.5 m = 30 Nm
ii. Then name its type.
This moment is a clockwise positive moment.
b) Calculate the moment of the 30N force (about O), then name its type.
i. Calculate the moment of the 30N force (about O),
Since moment = Force × perpendicular distance from point of moment ,
M' = F'd'
Since F' = 30 N and d' = 50 cm = 0.5 m
M' = 30 N × 0.5 m = 15 Nm
ii. Then name its type.
This moment is a counter-clockwise negative moment.
c) Will the plank balance? If not, which way will it tip?
i. Will the plank balance?
The plank will balance if the net moment on it is zero
So net moment, M' = positive moment - negative moment = M - M' = 30 Nm - 15 Nm = 15 Nm
Since the net moment on the plank is M" = 15 Nm ≠ 0,the plank will not balance.
ii Which way will it tip?
The plank would tip in the direction of the greater moment since the net moment is positive. This moment tilts the plank in a clockwise direction, so the plank would tip up.
d) What extra force would be needed at (B) to balance the plank?
The extra force must balance the net moment,
So M" = F"d" where F" = force and d" = distance of force from O = 10 cm = 0.10 m
F" = M"/d"
= 15 Nm/0.10 m
= 150 N
2. How can we make the percent error value as minimal as possible?
Answer:
Percent error can be reduced by improving both your accuracy and precision.
Answer:
Percent error can be reduced by improving both your accuracy and precision.
Explanation:
The bellows of an adjustable camera can be extended so that the largest distance from the lens to the film is 1.45 times the focal length. If the focal length of the lens is 6.14 cm, what is the distance from the closest object that can be sharply focused on the film
Answer: 19.80 cm
Explanation:
Given
focal length [tex]f=6.14\ cm[/tex] (as focal length is positive, it is converging lens)
Image distance [tex]v=1.5f[/tex]
[tex]v=1.5\times 6.14\\v=9.21\ cm[/tex]
using lens formula
[tex]\dfrac{1}{v}+\dfrac{1}{u}=\dfrac{1}{f}[/tex]
insert values
[tex]\dfrac{1}{u}=\dfrac{1}{6.14}-\dfrac{1}{8.9}\\\\\dfrac{1}{u}=0.1628-0.1123\\\\\dfrac{1}{u}=0.0505\\\\u=19.80\ cm[/tex]
Thus, the distance of the object is 19.80 cm
Given:
Focal length, f = 6.14 cmNow,
The image distance will be:
→ [tex]v = 1.5 f[/tex]
[tex]= 1.5\times 6.14[/tex]
[tex]= 9.21 \ cm[/tex]
By using the lens formula, we get
→ [tex]\frac{1}{v} + \frac{1}{u} = \frac{1}{f}[/tex]
By putting the values, we get
→ [tex]\frac{1}{u} = \frac{1}{6.14} - \frac{1}{8.9}[/tex]
[tex]\frac{1}{u} = 0.1628-0.1123[/tex]
[tex]\frac{1}{u} = 0.0505[/tex]
[tex]u = 19.80 \ cm[/tex]
Thus the answer above is correct.
Learn more about focal length here:
https://brainly.com/question/25020197
The second order bright line appears 0.50 cm from the center bright line when a double slit grating is used. The distance between the slits is 0.25 mm and the screen is 1.20 m from the grating. Find the wavelength of the light.
Distance of nth bright fringe from center is given by :
[tex]y = \dfrac{n\lambda D}{d}[/tex]
Here, D is distance between screen and slit.
d is distance between two slits.
Now, wavelength is written as :
[tex]\lambda = \dfrac{yd}{nD}\\\\\lambda = \dfrac{0.005\times 0.25 \times 10^{-3}}{2\times 1.2}\\\\\lambda = 5.208\times 10^{-7} m = 520.8 \ nm[/tex]
Hence, this is the required solution.
What will be the final temperature of a sample of water, if 32 kJ of heat is removed to lower 836
g of water starting with an initial water temperature of 25*C?
The final temperature of a sample of water is 15.89 ⁰C.
What will be the final temperature of the sample of water?
The final temperature of the sample of water is calculated by using the formula for heat capacity of water.
Q = mcΔθ
where;
Q is the heat capacity of the water = 32 kJm is the mass of the water = 836 gc is the specific heat capacity of water = 4200 J/kgCΔθ is the change in the temperature of the water = ?Δθ = Q / mc
The change in the temperature of the sample of water is calculated as follows;
Δθ = ( 32,000 ) / ( 0.836 x 4200 )
Δθ = 9.11 ⁰C
The final temperature of the water when heat is removed is calculated as follows;
T₂ = 25 ⁰C - 9.11 ⁰C = 15.89 ⁰C
Learn more about final temperature here: https://brainly.com/question/22338034
#SPJ1
If a ball is travelling in a circle of diameter 10m with velocity 20m/s, find the angular velocity of the ball.
Answer:
4 rad/s
Explanation:
The angular velocity is velocity over time:
[tex]\displaystyle{\omega = \dfrac{v}{r}}[/tex]
We know that the velocity is 20 m/s and the radius is half of diameter which is 10m/2 = 5 m. Hence, substitute in the formula:
[tex]\displaystyle{\omega = \dfrac{20 \: \text{m/s}}{5 \: \text{m}}}\\\\\displaystyle{\omega = 4 \: \text{rad/s}}[/tex]
Therefore, the angular velocity is 4 rad/s
______________ is the study of motion in fluids.
Hydrodynamics
Acceleration
Aerodynamics
Resistance
Answer:
i think its Hydrodynamics
Explanation:
because hydro is fluid
To understand the nature of electric fields and how to draw field lines In (Figure 2), what is wrong with panel B7 (Pick only those statements that apply to panel B) Electric field lines are a tool used to visualize electric foiled
Part B
In (Figure 2), what is wrong with panel B? (Fick only those statements that apply to panel B) Check all that apply.
Field liner caneot cross each other
The fold lines should be paraller becauze of the sheers symunner.
The field lnes chould spread apart as they leare the sheet to indiate mhr woakering of the field with gistance.
The field lines should always end on negative charges of at infinity.
in panel B, the field lines do end on negative charges, so this is not a problem No credit lost Try again D Submit Previous Answers
In (Figure 2), the wrong with panel B is: Field line can not cross each other the field lines should be parallel because of the sheers summoner.
What is electric field line?In general, an electric field line is a curve drawn with each point's tangent pointing in the direction of that point's net field. To designate the direction of the electric field from the two potential directions provided by a tangent to the curve, an arrow on the curve is obviously required. A field line is a space curve, or a three-dimensional curve.
The wrong with panel B is: Field line can not cross each other.
Learn more about electric field line here:
https://brainly.com/question/14438235
#SPJ1
6.__friction acts on objects that are not moving. *
which one is the answer ? (Science)
rolling
static
sliding
Answer:
STATIC friction acts on objects that are not moving........
Explanation:
DOES THIS HELPS!!
1- A ball, M = 4 kg is released from rest (vi =0) at a height, h = 2 m above the ground. (a)
What is the kinetic energy of the ball just before it hits the ground? What is the change in the
potential energy, ΔU during this motion? (b) Find the kinetic energy of the ball at a height, y
= 1.2 m above the ground. (Take g = 10 m/s2
).
(a) The kinetic energy of the ball just before it hits the ground is 78.4 J.
(b) The kinetic energy of the ball at a height of 1.2 m is 31.36 J.
What is the kinetic energy of the ball?The kinetic energy of the ball just before it hits the ground is calculated as follows;
K.E ( bottom) = P.E (top)
P.E (top) = mgh
where;
m is the mass of the objecth is the height of the objectg is acceleration due to gravityP.E (top) = 4 x 9.8 x 2
P.E (top) = 78.4 J
The change in the potential energy of the ball during its motion is calculated as follows;
ΔU = P.Ef - P.E i
where;
P.Ef is the final potential energy at ground levelP.Ei is the initial potential energy at maximum heightΔU = 0 J - 78.4 J
ΔU = -78.4 J
The kinetic energy of the ball at a height of 1.2 m is the change in the potential energy of the ball and it is calculated as follows;
K.E = -ΔU
K.E = -mg (hf - hi)
K.E = (4 x 9.8)(2m - 1.2 m)
K.E = 31.36 J
Learn more about kinetic energy here: https://brainly.com/question/25959744
#SPJ1
• Calculate the magnetic field strength inside a solenoid with a radius of 2m and has 2000 loops. Furthermore, it carries a 1600 A current?
The magnetic field strength of the solenoid of radius 2 m is 2.0096 T.
What is a magnetic field?Magnetic field is the region or space around which magnetic force is felt or experienced.
To calculate the magnetic field strength inside a solenoid, we use the formula below.
Formula:
B = μni/r......................... Equation 1Where:
μ = permeability of free spacen = Number of loopsr = Radius of the solenoidB = Magnetic field strengthi = CurrentFrom the question,
Given:
μ = 4π×10⁻⁷T.m/Ai = 1600 An = 2000 loopsr = 2 mSubstitute these values into equation 1
B = (4π×10⁻⁷×1600×2000/2)B = 2.0096 THence, the magnetic field strength is 2.0096 T.
Learn more about magnetic field here: https://brainly.com/question/26257705
#SPJ1
change $20.7 to pence
Answer:
1487.92 Pence Sterling (GBX)
A mass on a
string is swung in a circle of radius 1.0m
at a speed of 5.0mls. What is the period of
revolution?
Answer:
S = 2 * pi * 1 m = 6.28 m = distance traveled
V = S / T or T = S / V = 6.28 m / 5 m/s = 1.26 sec
This will be the time for 1 revolution or the period of the motion.
Yellow light (600 nm) passes through a
diffraction grating with d = 2.35 x 10-6 m.
What is the angular separation between
the second (m = 2) and third (m = 3)
maximum?
Answer:
19.284
Explanation:
The answer is right on Accellus.
Please help with this
A unit vector must have length equal to 1. By calculating the length of (1, 1), we discover that (12 + 12) = 2 = 1.414, which is not the same as 1, is the length.
How do you write unit vector notation?I,J notation is a way to describe a vector. In Cartesian coordinates, a unit vector is a vector with length 1. The unit vectors along the axis are denoted by the letters I and j, respectively. The form ai+bj an I + b j can be used to represent any two-dimensional vector.Numerous operations, including addition, subtraction, and vector multiplication, can be carried out with the aid of the vector form of representation. A=xi+yj+zk is the vector form of the cartesian representation of the three points (x, y, and z). A is equal to x I y j, and z k.Vy = Vyj, Vz = Vz k, and Vx = Vxî. V = Vx + Vy + Vz = Vxî+ Vyj+ Vz k is the result of applying the triangle rule to vector addition twice. The unit vector notation is used in this situation.To learn more about vector refer to:
https://brainly.com/question/30212035
#SPJ1