a) When the metal ball bearing falls from the machine to the concrete floor, its potential energy decreases while its kinetic energy increases.
The potential energy lost by the ball bearing can be calculated using the formula PE = mgh, where m is the mass of the ball bearing (0.005 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height the ball bearing falls (3.0 m). Thus, the potential energy lost by the ball bearing is:
PE = (0.005 kg)(9.8 m/s²)(3.0 m) = 0.147 J
At the same time, the ball bearing's kinetic energy increases by an amount equal to the potential energy lost. Therefore, the ball bearing's initial kinetic energy is zero, and its final kinetic energy is:
KE = 0.147 J
b) As the ball bearing bounces back up from the concrete floor to its starting point, its kinetic energy decreases while its potential energy increases. The kinetic energy lost by the ball bearing can be calculated as the same value as before:
KE = 0.147 J
The ball bearing's potential energy at its starting point is equal to the potential energy it lost on the way down, which is:
PE = 0.147 J
Therefore, the ball bearing's change in potential energy is 0.147 J (from down to up), and its change in kinetic energy is -0.147 J (from up to down).
To know more about potential energy, visit:
https://brainly.com/question/24284560
#SPJ1
Answer: a) When the ball bearing falls from the machine to the floor, there is a change in its potential and kinetic energies. The potential energy of an object at a height h above the ground is given by mgh, where m is the mass of the object, g is the acceleration due to gravity (9.8 m/s^2), and h is the height above the ground. Initially, the ball bearing is at rest on the machine, so its kinetic energy is zero. Therefore, the initial energy of the ball bearing is purely potential energy, given by:
PEi = mgh = (0.005 kg)(9.8 m/s^2)(3.0 m) = 0.147 J
When the ball bearing hits the ground, its potential energy is zero and its kinetic energy is at a maximum. The velocity of the ball bearing just before it hits the ground can be found using the equation:
v^2 = u^2 + 2as
where u is the initial velocity (which is zero), a is the acceleration due to gravity (-9.8 m/s^2), s is the distance fallen (3.0 m), and v is the final velocity just before hitting the ground. Solving for v, we get:
v = sqrt(2as) = sqrt(2*(-9.8 m/s^2)*(3.0 m)) = 7.67 m/s
The kinetic energy of the ball bearing just before it hits the ground is given by:
KEf = (1/2)mv^2 = (1/2)(0.005 kg)(7.67 m/s)^2 = 0.145 J
Therefore, the change in potential energy is:
ΔPE = PEf - PEi = 0 - 0.147 J = -0.147 J
And the change in kinetic energy is:
ΔKE = KEf - KEi = 0.145 J - 0 J = 0.145 J
b) When the ball bearing bounces back up to its starting point, there is another change in its potential and kinetic energies. Just before it reaches its highest point, the ball bearing's velocity is zero, so its kinetic energy is also zero. Therefore, its energy is purely potential energy, given by:
PEf = mgh = (0.005 kg)(9.8 m/s^2)(3.0 m) = 0.147 J
The ball bearing reaches its highest point when all of its initial kinetic energy has been converted to potential energy. At this point, its potential energy is at a maximum and its kinetic energy is at a minimum. The ball bearing then starts to fall back down towards the ground, and its potential energy starts to decrease while its kinetic energy increases. Just before it hits the ground, its kinetic energy is at a maximum and its potential energy is at a minimum, as we saw in part (a). When it bounces back up, the process repeats.
Therefore, the change in potential energy as the ball bearing travels from the floor back up to its starting point is:
ΔPE = PEf - PEi = 0.147 J - 0 J = 0.147 J
And the change in kinetic energy is:
ΔKE = KEf - KEi = 0 J - 0 J = 0 J
Note that the change in kinetic energy is zero because the ball bearing starts and ends at rest.
Explanation: can i get brainliest
The acceleration of a particle is a constant. At t=0, the velocity of the particle is (15.8i+ 18.4j) m/s. At t= 5.1 s the velocity is 14.0j m/s.
(a) What is the particle's acceleration (in m/s^2)?
a=
(b) How do the position (in m) and velocity (in m/s) vary with time? Assume the particle is initially at the origin.
r(t)=
v(t)=
Answer:
(a) To find the particle's acceleration, we can use the formula: a = (v2 - v1)/t where v1 is the initial velocity, v2 is the velocity at time t, and t is the time interval. Substituting the given values, we get: a = (14.0j - (15.8i + 18.4j))/5.1 s a = (-15.8i - 4.4j)/5.1 s a = (-3.1i - 0.9j) m/s^2 Therefore, the particle's acceleration is (-3.1i - 0.9j) m/s^2. (b) To find the position function, we can integrate the velocity function with respect to time: r(t) = ∫v(t) dt Integrating
All online typing programs are fee-based.
Question 5 options:
True
False
False. Not all online typing programs are free.
Online typing programsOnline typing programs are software applications or websites that provide typing lessons, exercises, and tests to help individuals improve their typing skills.
These programs typically include a variety of lessons and exercises designed to help users learn proper typing techniques, improve their typing speed, and increase their accuracy.
There are online typing programs that are available for free. While some online typing programs do require a fee to access all features or to remove ads, there are also many free typing programs available that provide basic typing lessons and exercises.
More on online typing can be found here: https://brainly.com/question/16266184
#SPJ1
What is the amplitude of this graph? *
A.1
B.2
C.3
D.4
The amplitude of the graph is 4. Option D.
What is amplitude?Amplitude refers to the maximum displacement or distance from the rest position of a vibrating object or wave. In other words, it measures the strength or intensity of the vibration or wave.
For sound waves, it determines the loudness of the sound, while for light waves, it affects the brightness of the light.
In the graph, the maximum amount of displacement of the wave is 4.
More on amplitude can be found here: https://brainly.com/question/8662436
#SPJ1
We perform an experiment with a 28 cm rod with a mass of .07 kg swinging from its endpoint. The pendulum is allowed to move freely. The pendulum system is then placed on a cart. From rest of both the cart and the pendulum, the cart is push and the acceleration (a) of the cart and the angle of the pendulum is measured. (1): Justify based on theory the maximum displacement angle observed. (2): Do the same, but what if the rod is hung 8 cm from its endpoint?
The rod is hung 8 cm from its endpoint instead of 28 cm, the maximum potential energy and thus the maximum angle of displacement will be smaller.
What is Potential Energy?
Potential energy is the energy possessed by an object due to its position or state. It is the energy that can be stored in an object as a result of its position or configuration. The amount of potential energy an object has depends on its position or configuration relative to other objects or systems, as well as the forces acting on it. Potential energy can be converted into other forms of energy, such as kinetic energy or thermal energy, depending on the situation.
The maximum displacement angle observed in a simple pendulum system is directly related to the initial potential energy and the gravitational potential energy of the system. As the pendulum is pulled away from its resting position, it gains potential energy, which is then converted to kinetic energy as it swings back towards the center.
Learn more about Potential Energy from the given link
https://brainly.com/question/14427111
#SPJ1
Which harmonic is this? *
The wave given in the diagram is a third harmonic wave
What type of harmonic is given?A harmonic wave is a type of wave that is characterized by its frequency, which is a multiple of the fundamental frequency. In other words, a harmonic wave has a frequency that is an integer multiple of the fundamental frequency, such as twice, three times, four times, etc. the fundamental frequency.
A third harmonic wave specifically has a frequency that is three times the fundamental frequency. It is important to note that a third harmonic wave is just one type of harmonic wave, and there can be other harmonic waves with different frequencies that are also multiples of the fundamental frequency.
Third harmonic waves can be observed in various physical systems, including musical instruments, electrical circuits, and mechanical systems. In musical instruments, for example, a third harmonic wave can produce a higher-pitched sound than the fundamental frequency, while in electrical circuits, it can result in a distortion of the signal. In mechanical systems, a third harmonic wave can cause resonance, which can lead to damaging vibrations.
NB: This wave is known as a standing wave
Learn more on harmonic waves here;
https://brainly.com/question/4290297
#SPJ1
A jar of tea is placed in sunlight until it
reaches an equilibrium temperature of 33.3
◦C .
In an attempt to cool the liquid, which has a
mass of 187 g , 133 g of ice at 0.0
◦C is added.
At the time at which the temperature of the
tea is 31.8
◦C , find the mass of the remaining
ice in the jar. The specific heat of water
is 4186 J/kg ·
◦ C . Assume the specific heat
capacity of the tea to be that of pure liquid
water.
Answer in units of g.
(2 significant digits)
Answer: The mass of the remaining ice in the jar is 1.3e+2 g.
Explanation: Let’s denote the mass of the remaining ice as m_ice. The heat gained by the ice is equal to the heat lost by the tea. The heat gained by the ice is given by m_ice * L_f, where L_f is the latent heat of fusion of water (334000 J/kg). The heat lost by the tea is given by m_tea * c_w * (T_initial - T_final), where m_tea is the mass of tea (0.187 kg), c_w is the specific heat capacity of water (4186 J/kg·°C), T_initial is the initial temperature of the tea (33.3°C), and T_final is the final temperature of the tea (31.8°C).
Equating the heat gained by the ice to the heat lost by the tea, we get:
m_ice * L_f = m_tea * c_w * (T_initial - T_final)
Substituting in the values, we get:
m_ice * 334000 = 0.187 * 4186 * (33.3 - 31.8)
Solving for m_ice, we get:
m_ice = 0.187 * 4186 * (33.3 - 31.8) / 334000
m_ice ≈ 0.130 kg
Converting to grams and rounding to two significant figures, we get:
m_ice ≈ 130 g
Hope this helps, and have a great day! =)
A uniform sphere with mass 28.0 kg and radius 0.380 m is rotating at constant angular velocity about a stationary axis that lies along a diameter of the sphere. If the kinetic energy of the sphere is 236 J, what is the tangential velocity of a point on the rim of the sphere?
The tangential speed of a point on the sphere's rim is 2.31 m/s.
Where does a cycle wheel with a radius of 0.5 metres rotate at a constant angular speed of 10 metres per second?An area of 0.1 T magnetic field lies perpendicular to the plane of a cycle wheel with a radius of 0.5 m, rotating at a constant rate of 10 rad/s. Between its centre and rim, there is a 0.5 V. zero EMF created.
I = (2/5) * m * r²
where m is the mass of the sphere and r is the radius.
Substituting the given values, we get:
I = (2/5) * 28.0 kg * (0.380 m)² = 1.35 kg m²
K = (1/2) * I * ω²
Substituting the given value of K and the calculated value of I, we get:
236 J = (1/2) * 1.35 kg m² * ω²
Solving for ω, we get:
ω = √(2 * 236 J / (1.35 kg m²)) = 6.62 rad/s
v = r * ω
Substituting the given value of r and the calculated value of ω, we get:
v = 0.380 m * 6.62 rad/s = 2.31 m/s.
To know more about tangential speed visit:-
https://brainly.com/question/17446849
#SPJ1
Imagine, you are elected as a prefect in charge of laboratory in your school. The senior 1 class is about to report for first time. Many of the students have never heard about a laboratory. Prepare a short speech about a laboratory for the new admitted students. The speech should last not more 20 minutes?
I am very pleased to be here today to welcome all of you to the laboratory.
As a prefect, I am in charge of this laboratory and I would like to take this opportunity to tell you a bit about what a laboratory is and why it is important.A laboratory is a place where scientific experiments are conducted and new knowledge is gained. The laboratory provides a safe and controlled environment for students to explore, analyze, and test out new ideas and concepts. In addition to providing a space for experimentation, the laboratory also provides access to specialized equipment and materials that can be used for research purposes.In the laboratory, you will learn how to use the scientific method to answer questions and solve problems. You will also learn how to properly use the equipment and materials found in the laboratory.This is an important skill that will help you to become a successful scientist.
learn more about laboratory Refer:brainly.com/question/18566158
#SPJ1
Suppose a double-slit interference pattern has its third minimum at an angle of 0.283° with slits that are separated by 292 μm.
Consequently, the light's wavelength that caused the multiply-slit interference pattern was around 546 nm.
Why do interference patterns exist?Solution and Justification: Interference patterns are produced when waves of identical (or what very similar) frequencies collide. The amplitudes of these waves may then either be raised (via constructive interference) or lowered.
Which interference pattern does the equation have?Fringes are the light lines that alternate with the black lines in the interference pattern. The following equation can be used to calculate the wavelength for the double-slit experiment: dissipates ≈ xd / L.
To know more about interference patterns visit:
https://brainly.com/question/13081724
#SPJ1
The correct question is
Problem 4: Suppose a double-slit interference pattern has its third minimum at an angle of 0.256° with slits that are separated by 293 μm.
Randomized Variables
0 = 0.256°
d=293 μm
Calculate the wavelength of the light in nm.
Gra
Ded
Pote
What is an electrical circuit?
A. It is a closed path through which current can flow.
B. It is a loop that provides no resistance at room temperature.
C. It is an open loop that does not permit current flow.
OD. It is a region of accumulation of excess charge.
Answer:
A
Explanation:
It can be a circuit if it's not closed
A 28 g block of ice is cooled to −78 ◦C. It
is added to 562 g of water in an 80 g copper
calorimeter at a temperature of 21◦C.
Find the final temperature. The specific
heat of copper is 387 J/kg ·
◦C and of ice is
2090 J/kg ·
◦C . The latent heat of fusion of
water is 3.33 × 105
J/kg and its specific heat
is 4186 J/kg ·
◦C .
Answer in units of ◦C
Answer:
14.46°C
Explanation:
Given:
Mass of ice = 28 g = 0.028 kgMass of water = 562 g = 0.562 kgMass of copper calorimeter = 80 g = 0.08 kgSpecific heat of copper = 387 J/(kg°C)Specific heat of water = 4186 J/(kg°C)Specific heat of ice = 2090 J/(kg°C)Latent heat of fusion of water = 3.33 x 10^5 J/kgInitial temperature of ice = -78°CMelting point of ice = 0°CInitial temperature of water and copper calorimeter = 21°CFind:
The final temperature of the mixtureSolution:
1. Calculate the heat required to warm the ice from its initial temperature to its melting point: Heat to warm ice = Mass of ice * Specific heat of ice * (Melting point of ice - Initial temperature of ice) Heat to warm ice = 0.028 kg * 2090 J/(kg*°C) * (0°C - (-78°C)) = 4579.44 J
2. Calculate the heat required to melt the ice at its melting point: Heat to melt ice = Mass of ice * Latent heat of fusion of water Heat to melt ice = 0.028 kg * 3.33e5 J/kg = 9324 J
3. Calculate the heat lost by the water and calorimeter as they cool down to the final temperature: Heat lost by water and calorimeter = Mass of water * Specific heat of water * (Initial temperature of water and copper calorimeter - Final temperature) + Mass of copper calorimeter * Specific heat of copper * (Initial temperature of water and copper calorimeter - Final temperature)
4. The total heat gained by the ice must be equal to the total heat lost by the water and calorimeter: Heat to warm ice + Heat to melt ice + Mass of ice * Specific heat of water * (Final temperature - Melting point of ice) = Heat lost by water and calorimeter 4579.44 J + 9324 J + 0.028 kg * 4186 J/(kg°C) * (Final temperature - 0°C) = [0.562 kg * 4186 J/(kg°C) + 0.080 kg * 387 J/(kg*°C)] * (21°C - Final temperature)
Solving for the final temperature, we get: Final temperature ≈ 14.46°C
So, the final temperature of the system is approximately 14.46°C
The sound level produced by one singer is
82.1 dB.
What would be the sound level produced
by a chorus of 43 such singers (all singing at
the same intensity at approximately the same
distance as the original singer)?
Answer in units of dB.
Answer: The sound level produced by a chorus of 43 singers will be 97.66 dB.
Explanation:
Let I, the intensity of a sound produced by a singer, therefore, the intensity of the sound produced by 43 singers is equal to 43I. Therefore, the intensity is:
x = 10log(43I/Io)
x = 10log(43) + 10log(I/Io)
The second term in the equation is the sound intensity produced by a single singer. We calculate that the sound intensity of 36:
x = 10log(36) + 82.1 = 97.66 dB
Today, which measures are not helping people survive or protect property from earthquakes?
A. building codes that set standards for earthquake-resistant construction
B. long-term predictions about where earthquakes will strike
C. short-term predictions about when earthquakes will strike
D. safety procedures to follow when earthquakes strike
The practices don't assist people survive earthquakes or safeguard property safety precautions to take when an earthquake occurs.
What are the basic plans for buildings that can withstand earthquakes?The ability of something like a building to bend, wobble, and deform again without collapsing is referred to as ductility, and it is frequently incorporated into earthquake-resistant designs. When subjected to the either vertical or horizontal shear stresses of an earthquake, a ductile structure can bend and flex.
Do structures withstand earthquakes?Based just on seismic dangers in the area, buildings are made to endure a particular amount of shaking. For instance, a structure in Los Angeles would be constructed to withstand a stronger earthquakes than one in Nyc. But, seismologists do not often know the precise size.
To know more about resistant visit :
https://brainly.com/question/30799966
#SPJ9
"People say that what we're all seeking is a meaning for life. I don't think that's what we're really seeking. I think that what we're seeking is an experience of being alive, so that our life experiences on the purely physical plane will have resonances within our own innermost being and reality, so that we actually feel the rapture of being alive."
Explain the meaning of this excerpt. How can you connect this to The Metamorphosis? Use specific examples from the novella, especially chapter 3, to support your discussion.
According to this passage, the ultimate aim of existence is to completely experience and appreciate the state of being alive rather than merely to discover a particular purpose or significance.
What purpose does life serve? John Campbell?"I don't think [the purpose of life] is what we're seeking," said Joseph Campbell. I believe it is an experience of life, allowing our experiences on the strictly physical plane to resonate with our innermost selves and realities, allowing us to truly feel the joy of existence.
What are Joseph Campbell's Journey quotations?The bravery to probe the depths, the idea of creative rebirth, and the never-ending cycle of transformation within ourselves are all fundamental themes of the hero's journey.
To know more about transformation visit:-
https://brainly.com/question/13115576
#SPJ1
EARTH AND SPACE SCIENCE!
If we are in the path of totality of an eclipse then which is true?
a.) We are in the shadow of the Penumbra
b.) We may not be experiencing the solar eclipse right at that exact moment but we will be in the shadow of the Umbra at some point.
Answer:
b
Explanation:
Long answers are always the correct answer. FAXS
A person goes down a skate ramp at a height of 10 m and reaches a maximum height of 8 m on the other side. Explain what happens to the energy.
When a person goes down a skate ramp from a height of 10 m and reaches a maximum height of 8 m on the other side, there is a transfer of energy happening.
What is energy transfer?
Initially, the person has gravitational potential energy due to their position at a height of 10 m. As the person goes down the ramp, this gravitational potential energy is converted into kinetic energy, which is the energy of motion. This is because the person is accelerating as they move down the ramp due to the force of gravity.
As the person reaches the bottom of the ramp, all of their gravitational potential energy has been converted into kinetic energy. At this point, the person's kinetic energy is at its maximum. However, the person's kinetic energy starts to decrease as they move up the other side of the ramp. This is because the person is now moving against the force of gravity and must use their kinetic energy to overcome this force and move upward.
As the person moves up the other side of the ramp, their kinetic energy is gradually converted back into gravitational potential energy. At the maximum height of 8 m on the other side of the ramp, the person's kinetic energy has been fully converted back into gravitational potential energy, and they are once again at their maximum height.
Therefore, the energy of the person is constantly being converted between kinetic energy and gravitational potential energy as they go down the ramp and up the other side. This conversion of energy is due to the force of gravity acting on the person and the changes in their height as they move along the ramp. No energy is lost during this process; it is simply converted from one form to another.
To know more about kinetic energy, visit:
https://brainly.com/question/999862
#SPJ1
Complete question is: A person goes down a skate ramp from a height of 10 m and reaches a maximum height of 8 m on the other side, there is a transfer of energy happening.
What is the linear diameter in meters of an object that has an angular diameter of 10 arcs ends and a distance of 50,000 meters?
the linear diameter of the object is approximately 77.28 meters for an object that has an angular diameter of 10 arcs ends and a distance of 50,000 meters
The angular diameter of an object is the angle it subtends at the observer's eye, while the linear diameter is the physical size of the object. We can use trigonometry to relate the angular diameter, the distance to the object, and the linear diameter.
If an object has an angular diameter of 10 arc seconds (10"), it subtends an angle of:
θ = 10" / 3600 = 0.0027778 radians
The linear diameter, D, is related to the distance, d, and the angle, θ, by the formula:
tan(θ/2) = D/2d
Rearranging this formula gives:
D = 2d * tan(θ/2)
Substituting the given values, we get:
D = 2 * 50,000 m * tan(0.0027778/2)
D = 2 * 50,000 m * tan(0.0013889)
D = 2 * 50,000 m * 0.0007728
D = 77.28 m
Learn more about linear diameter here:
https://brainly.com/question/13572468
#SPJ1
Urgent help!
Two pure tones Cs and Gs, with frequencies from the Pythagorean diatonic scale, are sounded simultaneously. Find
a) the frequencies of the three combination tones and
b) the notes on the Pythagorean scale to which these tones belong.
The sum tone has a frequency of (Cs+Gs) and the difference tones have frequencies of (Cs-Gs) and (Gs-Cs).
How are combination tones made and what are they?Combination tones are tones that are produced by the interaction of two or more pure tones in the ear or in a resonant system. They are produced by the sum and difference of the frequencies of the pure tones.
What is the Pythagorean diatonic scale and how is it related to music?The Pythagorean diatonic scale is a tuning system in which the frequency ratios between adjacent notes are based on the ratios of small whole numbers. This scale was used in ancient Greek music and later became the basis for Western music theory.
The Pythagorean tuning system is related to music because it provides a mathematical foundation for the intervals and relationships between musical notes, and has influenced the development of Western music for centuries.
To know more about frequencies,visit:
https://brainly.com/question/25867078
#SPJ1
Starting from rest, a wheel of radius 0.25 m accelerates counterclockwise at 6 rad/s2 in 2 seconds. Approximately many revolutions does the wheel complete during its 2 seconds of acceleration?
Starting from rest, a wheel of radius 0.25 m accelerates counterclockwise at 6 rad/s2 in 2 seconds. Approximately many revolutions does the wheel complete during its 2 seconds of acceleration?
The wheel completes approximately 1.91 revolutions during its 2 seconds of acceleration.
How can I determine how many revolutions a wheel takes when moving quickly?The car's uniform acceleration, a = v/t, is provided. The distance it moves in the given amount of time, t, can be calculated using the kinematic equations for linear motion. By multiplying this distance by the tyre's diameter, we can calculate the number of revolutions. The formula f = vf/rtire yields the ultimate angular speed.
To resolve this issue, we can use the kinetic equation shown below:
θ = 1/2 α t²
To begin with, we can use the following method to determine the wheel's ultimate angular velocity:
ωf = ωi + αt
where i represents the starting angular speed. (which is zero in this case).
ωf = ωi + αt
ωf = 0 + 6 rad/s² × 2 s
ωf = 12 rad/s
Next, we can calculate the number of rotations made during the two seconds of acceleration using the formula for the angle the wheel made:
θ = 1/2 α t²
θ = 1/2 × 6 rad/s^2 × (2 s)²
θ = 12 rad
We can divide this by 2 (the number of radians in a rotation) to get the number of revolutions:
of revolutions = θ / 2π
of revolutions = 12 rad / 2π
of revolutions ≈ 1.91 revolutions.
To know more about acceleration visit:-
https://brainly.com/question/12550364
#SPJ1
a pipe of external and internal diameters of 42cm and 28cm respectively has a mass 1600kg find its density in SI unit
The density of the pipe is 1.17 × [tex]10^{6}[/tex] kg/m³ (in SI units).
What is density?
To find the density of the pipe, we need to know its volume and mass. We can calculate the volume of the pipe using the formula for the volume of a cylinder:
Volume of cylinder = π * (radius)² * height
where the radius is half of the diameter.
The external radius of the pipe is 21 cm (0.21 m), and the internal radius is 14 cm (0.14 m). We don't know the height of the pipe, but we can assume that it is equal to the difference between the external and internal radii, since the pipe is assumed to have uniform thickness. Therefore, the height of the pipe is:
Height = (external radius) - (internal radius)
Height = 0.21 m - 0.14 m
Height = 0.07 m
Using these values, we can calculate the volume of the pipe:
Volume = π * ((0.21)² - (0.14)²) * 0.07
Volume = 0.00137 m³
Now we can find the density of the pipe by dividing its mass by its volume:
Density = Mass / Volume
Since the mass is given as 1600 kg, we have:
Density = 1600 kg / 0.00137 m³
Density = 1.17 × [tex]10^{6}[/tex] kg/m³
Therefore, the density of the pipe is 1.17 × [tex]10^{6}[/tex] kg/m³ (in SI units).
To know more about density, visit:
https://brainly.com/question/13145021
#SPJ1
Complete question is: a pipe of external and internal diameters of 42cm and 28cm respectively has a mass 1600kg. the density of the pipe is 1.17 × [tex]10^{6}[/tex] kg/m³ (in SI units).
Mrs. Hankinson made the following electromagnet. What is the most likely explanation for the failed experiment?
A. The battery is too low voltage to work
B. The electromagnet needs a switch
C. The wire was not connected properly
D. The metallic objects lost their magnetic domains
Because the cable was not connected properly is the most likely cause of the experiment's failure.
Which best describes the operation of an electromagnet?The coils of wire that make up an electromagnet have electricity running through them. When an electric current flows through the wire coils of an electromagnet, the coils act like a magnet because moving charges produce magnetic fields.
Why won't my electromagnet operate?There are numerous factors to examine. Make sure an ordinary magnet can attract safety pins as a start. Then, verify that current is actually flowing through your wire. To do this, you need a strong enough battery, a wire with a low enough resistance, and a complete circuit connecting the two.
To learn more about electromagnet visit:
brainly.com/question/3427992
#SPJ1
What is the speed of a wave with a wavelength of 4 cm and a frequency of 8 Hz?
A. 2 cm/s
B. 32cm/s
C. 0.5 cm/s
D. 12 cm/s
Easy physics.
if the ball in the following image continues to accelerate at a rate of 10m/s after it reaches the peak height and begins to move back down, what velocity should the ball 3 seconds after reaching the peak height.
The velocity of the ball 3 seconds after reaching the peak height is 30 m/s.
What is Velocity?
Velocity is a vector quantity that describes the speed and direction of motion of an object. It is defined as the rate of change of displacement of an object over time. In other words, velocity tells us how fast an object is moving and in what direction.
Assuming that air resistance is negligible, we can use the kinematic equations of motion to solve for the velocity of the ball 3 seconds after reaching the peak height.
Let's use the following variables:
a = acceleration = 10 m/[tex]s^{2}[/tex] (since the ball is continuing to accelerate downwards)
t = time = 3 seconds (since we want to find the velocity 3 seconds after reaching the peak)
v₀ = initial velocity = 0 m/s (since the ball has zero velocity at the peak)
v = final velocity (what we want to find)
Using the kinematic equation for velocity with constant acceleration:
v = v₀ + at
Substituting the given values:
v = 0 + 10 m/[tex]s^{2}[/tex] × 3 s
v = 30 m/s
Learn more about Velocity from the given link
https://brainly.com/question/24445340
#SPJ1
what is diffraction grating
Answer:
Diffraction Grating: Definition and Applications
A diffraction grating is a device that is used to separate light into its component wavelengths. It consists of a flat surface that has a large number of parallel grooves or lines etched into it. When light is shone onto the grating, it is diffracted into its individual wavelengths, producing a spectrum of colors. Diffraction gratings are commonly used in various applications, such as spectroscopy, astronomy, and telecommunications.
The science behind diffraction gratings is based on the principles of wave interference and diffraction. When light passes through a narrow slit or a small opening, it diffracts, or spreads out, into a series of bright and dark fringes. When a beam of light passes through a grating, the light is diffracted by each of the parallel lines on the surface of the grating, resulting in a series of bright and dark fringes that are spaced apart at regular intervals. The spacing between the lines on the grating determines the amount of diffraction, and therefore the angle at which the diffracted light is scattered.
Diffraction gratings are commonly used in spectroscopy, which is the study of the interaction between light and matter. Spectroscopy is used in various applications, such as identifying the chemical composition of materials, analyzing the spectra of stars and galaxies, and studying the properties of molecules and atoms.
In astronomy, diffraction gratings are used in telescopes and spectrometers to study the spectra of stars and galaxies. By analyzing the spectra, astronomers can determine the chemical composition, temperature, and other properties of celestial objects.
In telecommunications, diffraction gratings are used in fiber-optic communication systems to separate different wavelengths of light. This allows for the transmission of multiple signals over a single optical fiber, increasing the capacity and speed of the communication system.
In conclusion, a diffraction grating is a device that is used to separate light into its component wavelengths. It consists of a flat surface with parallel lines etched into it, which diffract the light and produce a spectrum of colors. Diffraction gratings are commonly used in spectroscopy, astronomy, and telecommunications, and they play an important role in our understanding of the interaction between light and matter.
Explanation:
Answer:
diffraction grating is an optical component with a periodic structure that diffracts light into several beams travelling in different directions.
Explanation:
A gas burner transfers 9.40 ✕ 105 J into a block of ice with a mass of 2.23 kg and an initial temperature of 0°C.
(a)
How much of the energy (in J) supplied by the burner goes into melting all the ice into liquid water? (Enter your answer to at least three significant figures.)
J
(b)
How much of the energy (in J) supplied by the burner goes into raising the temperature of the liquid water? (Enter your answer to at least three significant figures.)
J
(c)
What is the final temperature of the liquid water in degrees Celsius?
Answer:
HOPE IT HELPS..........
a number of sources indicate that writng assignments in lower level college courses are typically pages in length
According to a variety of sources, writing assignments in college courses at the entry level are typically 5-7 pages long, while those in courses at the main layer can be as long as 15-20 pages.
How often pages should a task have?The vast majority of the times, the project will give precise instructions on how many words or pages that must produce. This is frequently a range instead of a precise figure Always check to your teacher if you're unsure.
What is the duration of the assignment?Length of Assignment refers to the number of days between the initial Operational Phase just at Incident or report site on the originating Resource Order and the beginning of returning travel to the Authorized Dispatch Place upon completion or completion of the assignment.
To know more about layer visit:
https://brainly.com/question/7181864
#SPJ1
In the scientific method, which of the following should a researcher do after gathering raw data? Perform the experiment to test the hypothesis Analyze the data collected and check to see if they support the hypothesis Propose new directions for further research Report the results obtained through the experiment and list the methodology used
Answer:
Analyze the data collected and check to see if they support the hypothesis
Explanation: A. if they already have the raw data thaat means they have already conducted the experiment so it can not be the first option
B. once you collect the raw data you need to check if it corresponds to the data so it would have to be the 2 option.
Hopes this helps.
Describe the motion of a cyclist at the start of a race is the terms velocity and acceleration
At the start of a race, a cyclist's velocity is zero because they are not yet moving. However, as they begin to pedal and move forward, their velocity increases. The direction of the velocity depends on the direction in which they are moving.
Acceleration is the rate at which velocity changes over time. In the case of a cyclist at the start of a race, their acceleration would be positive, as they are increasing their velocity. The magnitude of the acceleration would depend on various factors such as the force of the cyclist's pedaling, the mass of the cyclist and the bike, and the friction between the tires and the ground.
As the cyclist continues to pedal, their velocity will increase, and their acceleration may either increase or decrease depending on the external factors that influence their motion. Ultimately, the cyclist's velocity and acceleration will determine their position and speed relative to other cyclists in the race.
5. [6.67/10 Points] DETAILS
MY NOTES
ASK YOUR TEACHER
N/C
(a) Determine the electric field strength at a point 1.00 cm to the left of the middle charge shown in the figure below. (Enter the
magnitude of the electric field only.)
6.00 μC
1.50 μC -2.00 μC
3.00 cm
Submit Answer
PREVIOUS ANSWERS
---Select---
Need Help? Read It
(b) If a charge of -6.13 µC is placed at this point, what are the magnitude and direction of the force on it?
magnitude
N
direction
SERCP11 15.3.P.018. 2/5 Submissions Used
2.00 cm →
As the charge is negative, the force, which has a magnitude of 33.05 N, is directed to the left, against the electric field.
What is the electric field's intensity at a specific distance from the point charge E?E is a symbol for the magnitude of the electric field at a specific distance from a point charge. At twice the distance from the point charge, what is the electric field's strength? The field's strength is E/2 at twice the distance. The field's strength is still equal to E at a distance that is twice as great.
E = k*q/r²
r1 = 2.00 cm
r2 = 1.00 cm + 3.00 cm = 4.00 cm
r3 = 1.00 cm
Using these distances, we can calculate the electric field due to each charge:
E1 = kq1/r1² = (9.0 x 10⁹ Nm²/C²) * (1.50 x 10⁻⁶ C) / (0.02 m)² = 168.75 N/C (to the right)
E2 = kq2/r2² = (9.0 x 10⁹ Nm²/C²) * (-2.00 x 10^⁻⁶ C) / (0.04 m)² = -112.50 N/C (to the left)
E3 = kq3/r3² = (9.0 x 10⁹ Nm²/C²) * (6.00 x 10⁻⁶ C) / (0.01 m)² = 5.40 x 10⁶ N/C (to the right)
E = E1 + E2 + E3 = 168.75 N/C - 112.50 N/C + 5.40 x 10⁶ N/C = 5.39 x 10⁶ N/C (to the right)
F = q*E
F = (-6.13 x 10 C) * (5.39 x 10⁶ N/C) = -33.05 N
To know more about magnitude visit:-
https://brainly.com/question/29766788
#SPJ1
A Carnot engine is operated as an air conditioner to cool a house in the summer. The air conditioner
removes 14 kJ of heat per second from the house, and maintains the inside temperature at 293 K, while
the outside temperature is 369 K. The power required for the air conditioner under these operating
conditions, in SI units, is closest to:
In SI units, the needed power for the air conditioner under these operating circumstances is most closely 69.3 kW.
The power required for a Carnot engine operating as an air conditioner is given by the formula
[tex]P = \frac{Q_H}{\eta },[/tex]
where [tex]Q_H[/tex] is the rate of heat removed from the house, and η is the Carnot efficiency. The Carnot efficiency is given by the formula,
[tex]\eta =\frac{ 1 - T_C}{T_H}[/tex]
where [tex]T_C[/tex] is the cold reservoir temperature (293 K) and [tex]T_H[/tex]is the hot reservoir temperature (369 K).
Thus, the power required for the air conditioner is given by:
[tex]P = \frac{14 kJ/s }{(\frac{1 - 293 K}{369 K}) }\\=\frac{ 14 kJ/s }{ (1 - 0.798) }\\[/tex]
[tex]= \frac{14 kJ/s }{ 0.202 }\\P= 69.3 kW.[/tex]
Therefore, the power required for the air conditioner under these operating conditions, in SI units, is closest to 69.3 kW.
learn more about power refer:brainly.com/question/28794336
#SPJ1