The work done by the force on the object as it moves from x=10.0 m to x=17.0 m is -267 J.
a) The work done by the force on the object as it moves from x=0 to x=5.00 m.The work done by the force on the object is equal to the change in the object's kinetic energy. In this case, the object's initial speed is zero. Hence, the work done by the force is equal to the kinetic energy that the object will have after moving a distance of 5.00 m.
Work done = ΔKE= (1/2)mv
2 - 0 = (1/2)(3.00 kg)(7.0 m/s)2
= 73.5 J
b) The work done by the force on the object as it moves from x=5.00 m to x=10.0 m.The work done by the force on the object is equal to the change in the object's kinetic energy. In this case, the object's initial speed is 7.0 m/s. Hence, the work done by the force is equal to the kinetic energy that the object will have after moving a distance of 5.00 m.
Work done = ΔKE
= (1/2)mv
2f - (1/2)mv2i= (1/2)(3.00 kg)(12.0 m/s)2 - (1/2)(3.00 kg)(7.0 m/s)2
= 210 J
c) The work done by the force on the object as it moves from x=10.0 m to x=17.0 m.The work done by the force on the object is equal to the change in the object's kinetic energy. In this case, the object's initial speed is 12.0 m/s. Hence, the work done by the force is equal to the kinetic energy that the object will have after moving a distance of 7.00 m.
Work done = ΔKE= (1/2)mv
2f - (1/2)mv2i= (1/2)(3.00 kg)(6.70 m/s)2 - (1/2)(3.00 kg)(12.0 m/s)2= -267 J (negative work as the force and displacement are in opposite directions)
Thus, the work done by the force on the object as it moves from x=0 to x=5.00 m is 73.5 J, the work done by the force on the object as it moves from x=5.00 m to x=10.0 m is 210 J and the work done by the force on the object as it moves from x=10.0 m to x=17.0 m is -267 J.
To know more about work done visit:
https://brainly.com/question/2750803
#SPJ11
Protein centrifugation is a technique commonly used to separate proteins according to size. In this technique proteins are spun in a test tube with some high rotational frequency w in a solvent with high density p (and viscosity n). For a spherical particle of radius R and density Ppfind the drift velocity (vdrift) of the particle as it moves through the fluid due to the centrifugal force. Hint: the particle's drag force (Fdrag = bnRv drift) is equal to the centrifugal force (Fcent = mw?r, where r is the molecule's distance from the rotation axis).
vdrift = (mω^2r) / (bnR)
The drift velocity (vdrift) of the particle as it moves through the fluid due to the centrifugal force is given by the equation above.
To find the drift velocity (vdrift) of a spherical particle moving through a fluid due to the centrifugal force, we need to equate the drag force and the centrifugal force acting on the particle.
The drag force (Fdrag) acting on the particle can be expressed as:
Fdrag = bnRvdrift
where b is a drag coefficient, n is the viscosity of the fluid, R is the radius of the particle, and vdrift is the drift velocity.
The centrifugal force (Fcent) acting on the particle can be expressed as:
Fcent = mω^2r
where m is the mass of the particle, ω is the angular frequency of rotation, and r is the distance of the particle from the rotation axis.
Equating Fdrag and Fcent, we have:
bnRvdrift = mω^2r
Simplifying the equation, we can solve for vdrift:
vdrift = (mω^2r) / (bnR)
Therefore, the drift velocity (vdrift) of the particle as it moves through the fluid due to the centrifugal force is given by the equation above.
Learn more about centrifugal force:
https://brainly.com/question/954979
#SPJ11
Radios use resonance in order to tune-in to a particular station. A physics student builds a simple radio using a RLC series circuit. They decide to use a resistor with R=49.5Ω, but they only have one capacitor with capacitance C=180pF. To listen to their favorite station KXY 84.8 FM, which is at a frequency of 84.8MHz, what must be the inductance L of their circuit's inductor? L
The inductance (L) of the circuit's inductor must be approximately 120 μH.
In order to tune in to a specific radio station, resonance is utilized in radios. Resonance occurs when the frequency of the radio station matches the natural frequency of the radio circuit. To achieve resonance in a series RLC circuit, the inductive reactance (XL) and the capacitive reactance (XC) should be equal, canceling each other out. The inductive reactance is given by XL = 2πfL, where f is the frequency and L is the inductance of the inductor.
To listen to station KXY 84.8 FM with a frequency of 84.8 MHz (84.8 × 10^6 Hz), we need to determine the inductance (L). First, we need to calculate the capacitive reactance (XC). XC is given by XC = 1 / (2πfC), where C is the capacitance of the capacitor.
Plugging in the values, we have XC = 1 / (2π × 84.8 × 10^6 Hz × 180 × 10^(-12) F). By simplifying this expression, we can find the value of XC.
Once we have the value of XC, we can set it equal to XL and solve for L. Since XC = XL, we can write 1 / (2πfC) = 2πfL. Rearranging this equation and substituting the given values, we can solve for L.
Following these calculations, we find that the inductance (L) of the circuit's inductor must be approximately 120 μH to tune in to station KXY 84.8 FM.
Learn more about circuit's
brainly.com/question/12608491
#SPJ11
A cat with mass mk = 5.00 kg sits on a swing that has mass mh = 1.50 kg. Ignore the mass of the ropes that hold the swing up. Suddenly a dog appears, and the cat jumps down from the swing to hide. As the cat jumps off, the swing swings backwards. Assume that the cat jumps out horizontally and that both the cat and the swing are particles. Ignore all forms of friction. - Find the speed of the cat as it leaves the swing when you know that the height h = 0.545 m and that the horizontal distance s = 0.62 m. - Use the result above to find out how high above its lowest point the swing can get. If you have not solved the part, you can set up and justify the equations that must be used. = = -
The speed of the cat as it leaves the swing when you know that the height h = 0.545 m and that the horizontal distance s = 0.62 m is 2.866 m/s and the maximum height is 0.419 m.
Speed of the cat as it leaves the swing:
To find the speed of the cat, we can use the principle of conservation of mechanical energy. Initially, the system (cat + swing) has gravitational potential energy, which is converted into kinetic energy as the cat jumps off the swing.
Using the conservation of mechanical energy equation:
[tex]m_k gh=0.5(m_k+m_h)v^{2} \\5 \times 9.8 \times 0.545=0.5(5.00+1.50)v^{2} \\26.705=3.25 v^{2}\\\8.2169=v^{2}\\ v=\sqrt{8.2169} \\v=2.866 m/s[/tex]
where [tex]m_k[/tex] is the mass of the cat, [tex]m_h[/tex] is the mass of the swing, g is the acceleration due to gravity, h is the height, and v is the speed of the cat.
Therefore,the speed of the cat is found to be 2.866 m/s.
Maximum height of the swing:
Using the principle of conservation of mechanical energy, we can also determine the maximum height the swing can reach. At the highest point, the swing has only potential energy, which is equal to the initial gravitational potential energy.
Using the conservation of mechanical energy equation:
[tex]0.5(m_k+m_h)v^{2}=(m_k+m_h)gH_m_a_x\\[/tex]
where [tex]H_m_a_x[/tex] is the maximum height the swing can reach.
So, [tex]H_m_a_x[/tex] will be,
[tex]0.5(5.00+1.50)v^{2} \times 8.2169=(5.00+1.05) \times 9.8 \times H_m_a_x\\ 26.70=63.7H_m_a_x\\H_m_a_x=0.419 m[/tex]
Thus,the maximum height is 0.419 m.
In conclusion,The speed of the cat as it leaves the swing is 2.866 m/s and the maximum height is 0.419 m.
Learn more about speed here: brainly.com/question/27888149
#SPJ11
can
i please get the answer to this
Question 7 (1 point) Standing waves Doppler shift Resonant Frequency Resonance Constructive interference Destructive interference
Standing waves, Doppler shift, resonant frequency, resonance, constructive interference, and destructive interference are all concepts related to wave phenomena.
Standing waves refer to a pattern of oscillation in which certain points, called nodes, do not move while others, called antinodes, oscillate with maximum amplitude. They are formed by the interference of two waves with the same frequency and amplitude traveling in opposite directions. Doppler shift occurs when there is a change in frequency or wavelength of a wave due to the relative motion between the source of the wave and the observer. It is commonly observed with sound waves, where the frequency appears higher as the source moves towards the observer and lower as the source moves away.
Resonant frequency refers to the natural frequency at which an object vibrates with maximum amplitude. When an external force is applied at the resonant frequency, resonance occurs, resulting in a large amplitude response. This phenomenon is commonly used in musical instruments, such as strings or air columns, to produce sound.
Constructive interference happens when two or more waves combine to form a wave with a larger amplitude. In this case, the waves are in phase and reinforce each other. Destructive interference occurs when two or more waves combine to form a wave with a smaller amplitude or cancel each other out completely. This happens when the waves are out of phase and their crests align with the troughs.These concepts play crucial roles in understanding and analyzing various wave phenomena, including sound, light, and electromagnetic waves.
To learn more about Doppler shift click here : brainly.com/question/28106478
#SPJ11
The magnetic force F' is always perpendicular to the acceleration a of the particle. T/F
True, the magnetic force F' is always perpendicular to the acceleration a of the particle.
True. According to the Lorentz force law, the magnetic force F' experienced by a charged particle moving in a magnetic field is given by F' = q(v × B), where q is the charge of the particle, v is its velocity, and B is the magnetic field.
Since the cross product v × B results in a vector perpendicular to both v and B, the magnetic force F' is always perpendicular to the velocity of the particle. Additionally, Newton's second law states that F' = ma, where m is the mass of the particle and a is its acceleration. Therefore, the magnetic force F' is always perpendicular to the acceleration a of the particle.
To learn more about magnetic field
Click here brainly.com/question/14848188
#SPJ11
Question 3 (1 point) The altitude of a geosynchronous satellite is a) 4.2 x 107 m O b) 3.6 x 107 m c) 4.2 x 106 km d) 3.6 × 106 m e) 6.4 x 106 m
The correct altitude for a geosynchronous satellite is approximately 6.4 x 10^6 meters.
The correct option for the altitude of a geosynchronous satellite is e) 6.4 x 106 m. Geosynchronous satellites are placed in orbits at an altitude where their orbital period matches the Earth's rotation period, allowing them to remain stationary relative to a point on the Earth's surface. This altitude is approximately 35,786 kilometers or 22,236 miles above the Earth's equator. Converting this to meters, we get 35,786,000 meters or 3.6 x 107 meters. Therefore, option e) 6.4 x 106 m is not the correct altitude for a geosynchronous satellite.
To know more about altitude, click here:
brainly.com/question/12999337
#SPJ11
A piece of wood has a mass of 20 g and when placed in water it floats. That is, if totally immersed its buoyant force is more than enough to overcome its weight. Therefore a sinker is attached to the block of wood. Since only the buoyant force of the wood when totally immersed is required and not that of the wood and sinker combination, first the sinker is immersed with the wood out of water as in figure 1 to obtain an apparent mass of 40 g. Then the water in the container is raised to cover the wood as in figure 2 and the apparent mass is 16 g.
What is the specific gravity of the wood?
The specific gravity of the wood is 1
To find the specific gravity of the wood, we can use the concept of buoyancy and the equation:
Specific gravity = Density of the wood / Density of water
First, let's calculate the apparent loss of weight of the wood when submerged. We can use the equation:
Apparent loss of weight = Mass of wood out of water - Mass of wood in water
Given that the mass of the wood out of water is 40g and the mass of the wood in water is 16 g:
Apparent loss of weight = 40 g - 16 g = 24 g
Next, let's calculate the weight of the water displaced by the wood. We know that the buoyant force acting on the wood is equal to the weight of the water displaced by the wood.
Since the wood is floating, the buoyant force is equal to the weight of the wood.
Weight of water displaced = Apparent loss of weight of the wood = 24 g
The density of water is 1 g/cm³ (or 1000 kg/m³).
Density of the wood = (Weight of water displaced) / (Volume of water displaced)
To find the volume of water displaced, we can use the equation:
Volume of water displaced = (Mass of water displaced) / (Density of water)
Since the density of water is 1 g/cm³, the volume of water displaced is equal to the mass of water displaced.
Volume of water displaced = Mass of water displaced = Apparent loss of weight of the wood = 24 g
Now, we can calculate the density of the wood:
Density of the wood = (Weight of water displaced) / (Volume of water displaced) = 24 g / 24 g = 1 g/cm³
Finally, we can calculate the specific gravity of the wood:
Specific gravity = Density of the wood / Density of water = 1 g/cm³ / 1 g/cm³ = 1
Therefore, the specific gravity of the wood is 1.
Know more about specific gravity:
https://brainly.com/question/9100428
#SPJ4
The difference in frequency between the first and the fifth harmonic of a standing wave on a taut string is f5 - f1 = 40 Hz. The speed of the standing wave is fixed and is equal to 10 m/s. Determine the difference in wavelength between these modes.
λ5 - λ1 = -0.80 m
λ5 - λ1 = -0.64 m
λ5 - λ1 = 0.20 m
λ5 - λ1 = -1.60 m
λ5 - λ1 = 5 m
The correct difference in wavelength between the first and fifth harmonics of the standing wave is: λ5 - λ1 = -0.80 m. The negative sign indicates that the fifth harmonic has a shorter wavelength compared to the first harmonic.
To explain the difference in wavelength between the first and fifth harmonics of a standing wave, we need to understand the relationship between frequency, wavelength, and speed of the wave.
The speed of the standing wave is fixed at 10 m/s. In a standing wave on a taut string, the frequency of the wave is determined by the harmonics or overtones. The first harmonic is the fundamental frequency (f1), and the fifth harmonic is the frequency (f5) that is five times higher than the fundamental frequency.
The difference in frequency between the first and fifth harmonics is given as f5 - f1 = 40 Hz. However, since the speed of the wave is constant, the difference in frequency also corresponds to a difference in wavelength.
Using the wave equation v = f * λ, where v is the wave speed, f is the frequency, and λ is the wavelength, we can rearrange it to solve for the difference in wavelength:
Δλ = (v / f5) - (v / f1)
Substituting the given values:
Δλ = (10 m/s / f5) - (10 m/s / f1)
Δλ = 10 m/s * ((1 / f5) - (1 / f1))
Since f5 - f1 = 40 Hz, we can express this as:
Δλ = 10 m/s * ((1 / (f1 + 40 Hz)) - (1 / f1))
Calculating this expression gives us:
Δλ ≈ -0.80 m
Therefore, the difference in wavelength between the first and fifth harmonics of the standing wave is approximately -0.80 m. The negative sign indicates that the fifth harmonic has a shorter wavelength compared to the first harmonic.
Learn more about wavelength here:-
https://brainly.com/question/16051869
#SPJ11
An ideal neon sign transformer provides 9080 V at 51.0 mA with an input voltage of 110 V. Calculate the transformer's
input power and current.
An ideal neon sign transformer provides 9080 V at 51.0 mA with an input voltage of 110 V, the transformer's input power is approximately 464.28 W and the input current is approximately 4.22 A.
We can use the following calculation to compute the transformer's input power:
Input Power (P) = Input Voltage (V) * Input Current (I)
Here, it is given that:
Input Voltage (V) = 110 V
Input Current (I) = ?
Input Current (I) = Output Power (P) / Output Voltage (V)
Given:
Output Power (P) = 9080 V * 51.0 mA = 464.28 W (converting mA to A)
Output Voltage (V) = 9080 V
Now,
Input Current (I) = 464.28 W / 110 V ≈ 4.22 A
Thus, the transformer's input power is approximately 464.28 W and the input current is approximately 4.22 A.
For more details regarding transformer, visit:
https://brainly.com/question/15200241
#SPJ4
An inductor with L - 18 mH is connected to a arcut that produces a current increasing steadily from 4 to 15 A ver a time of 255. What is the voltage across the inductor?
The voltage across the inductor is approximately 0.0788 V.
The voltage across an inductor can be calculated using the formula:
V = L * di/dt
Where:
V is the voltage across the inductor,
L is the inductance (given as 18 mH = 18 * 10^-3 H),
di/dt is the rate of change of current.
Given that the current increases steadily from 4 A to 15 A over a time of 255 s, we can calculate di/dt as follows:
di/dt = (change in current) / (change in time)
di/dt = (15 A - 4 A) / 255 s
di/dt = 11 A / 255 s
Now, we can substitute the values into the formula to find the voltage across the inductor:
V = (18 * 10^-3 H) * (11 A / 255 s)
V ≈ 0.0788 V
Therefore, the voltage across the inductor is approximately 0.0788 V.
Learn more about voltage:
https://brainly.com/question/1176850
#SPJ11
Sound waves with frequency 3200 Hz and speed 343 m/s diffract through the rectangular opening of a speaker cabinet and into a large auditorium of length 100 m. The opening, which has a horizontal width of 31.0 cm, faces a wall 100 m away. Along that wall, how far from the central axis will a listener be at the first diffraction mum and thus have difficulty hearing the sound? (Neglect reflections.) 《 m
To find the distance from the central
axis
to the first diffraction minimum, we can use the formula for the position of the first minimum in a single slit diffraction pattern.
The problem asks to determine the distance from the central axis to the first
diffraction
minimum, where a listener will have difficulty hearing the sound waves diffracted through the rectangular opening of a speaker cabinet into a large auditorium.
Distance to the first minimum (y) can be calculated using the formula:y = (λ * D) / a
Where:
λ = wavelength of the sound wave
D = distance from the opening to the wall
a = width of the rectangular opening
Given:
Frequency
of sound waves = 3200 Hz (or cycles per second)
Speed of sound waves = 343 m/s
Length of auditorium = 100 m
Width of rectangular opening = 31.0 cm = 0.31 m
First, we need to find the
wavelength
of the sound wave using the formula: λ = v / f
Where:
v = speed of sound
waves
f = frequency of sound waves λ = 343 m/s / 3200 Hz ≈ 0.107 m
Now, we can calculate the distance to the first minimum using the formula:y = (0.107 m * 100 m) / 0.31 my ≈ 34.52 m
Therefore, a listener will be approximately 34.52 meters away from the central axis at the first diffraction minimum, where they will have difficulty hearing the sound.
To learn more about
diffraction
click here.
brainly.com/question/32864703
#SPJ11
boy and a girl pull and push a crate along an icy horizontal surface, moving it 15 m a constant speed. The boy exerts 50 N of force at an angle of 52° above the orizontal, and the girl exerts a force of 50 N at an angle of 32° above the horizontal, calculate the total work done by the boy and girl together.
The total work done by the boy and girl together is 1112.7 J.
In this problem, a boy and a girl exert forces on a crate to pull and push it along an icy horizontal surface. The crate is moved 15 m at a constant speed. The boy exerts a force of 50 N at an angle of 52° above the horizontal, and the girl exerts a force of 50 N at an angle of 32° above the horizontal. The question is asking for the total work done by the boy and girl together.To solve this problem, we need to use the formula for work done, which is W = Fdcosθ, where W is work done, F is the force applied, d is the distance moved, and θ is the angle between the force and the displacement. We can calculate the work done by the boy and girl separately and then add them up to get the total work done.Let's start with the boy. The force applied by the boy is 50 N at an angle of 52° above the horizontal. The horizontal component of the force is Fx = Fcosθ = 50cos(52°) = 31.86 N.
The vertical component of the force is Fy = Fsinθ = 50sin(52°) = 39.70 N. Since the crate is moving horizontally, the displacement is in the same direction as the horizontal force. Therefore, the angle between the force and the displacement is 0°, and cosθ = 1. The work done by the boy is W = Fdcosθ = (31.86 N)(15 m)(1) = 477.9 J.Next, let's find the work done by the girl. The force applied by the girl is 50 N at an angle of 32° above the horizontal. The horizontal component of the force is Fx = Fcosθ = 50cos(32°) = 42.32 N.
The vertical component of the force is Fy = Fsinθ = 50sin(32°) = 26.47 N.
Again, the displacement is in the same direction as the horizontal force, so the angle between the force and the displacement is 0°, and cosθ = 1. The work done by the girl is W = Fdcosθ = (42.32 N)(15 m)(1) = 634.8 J.
To find the total work done by the boy and girl together, we simply add up the work done by each of them: Wtotal = Wboy + Wgirl = 477.9 J + 634.8 J = 1112.7 J.
To know more about total work:
https://brainly.com/question/31506558
#SPJ11
ا Marked out of 1,00 In a certain electroplating process gold is deposited by using a current of 14.0 A for 19 minutes. A gold ion, Au*, has a mass of approximately 3.3 x 10-22 g. How many grams of gold are deposited by this process? Select one: 33 g 97 g 22 g 28 g 16 g
To determine the amount of gold deposited in the electroplating process, we can use the formula for calculating the amount of substance deposited,
which is given by the product of the current, time, and the equivalent weight of the substance. The equivalent weight of gold can be calculated by dividing its molar mass by the number of electrons transferred in the electroplating reaction.
By substituting the given values into the formula, we find that approximately 16 grams of gold are deposited by this process.
The amount of gold deposited in the electroplating process is determined by the product of the current, time, and the equivalent weight of gold.
By calculating the equivalent weight of gold and substituting the given values, we find that approximately 16 grams of gold are deposited.
The equivalent weight takes into account the molar mass and the number of electrons transferred in the electroplating reaction, providing a way to determine the amount of substance deposited.
To know more about electroplating refer here:
https://brainly.com/question/30963288#
#SPJ11
An unknown metal "X" is used to make a 5.0 kg container that is then used to hold 15 kg of water. Both the container and the water have an initial temperature of 25 °C. A 3.0 kg piece of the metal "X" is heated to 300 °C and dropped into the water. If the final temperature of the entire system is 30 °C when thermal equilibrium is reached, determine the specific heat of the mystery metal.
The specific heat of the unknown metal "X" is approximately 0.50 J/g°C, indicating its ability to store and release thermal energy.
To find the specific heat of the metal, we can use the equation Q = mcΔT, where Q represents the heat transferred, m is the mass, c is the specific heat, and ΔT is the change in temperature. In this case, the heat gained by the water is equal to the heat lost by the metal and the container.
We can calculate the heat gained by the water using Qwater = mwatercwaterΔT, where m water is the mass of water, cwater is the specific heat of water, and ΔT is the change in temperature. The heat lost by the metal and the container is given by Qmetal = (mmetal + mcontainer)cmetalΔT. By equating Qwater and Qmetal, we can solve for the specific heat of the metal, cm.
Substituting the given values, we have:
(mmetal + mcontainer)cmetalΔT = mwatercwaterΔT
Simplifying, we get:
(3.0 kg + 5.0 kg)cmetal(30 °C - 300 °C) = 15 kg(4.18 J/g°C)(30 °C - 25 °C)
Solving the equation, we find the value of cm to be:
cmetal ≈ 0.50 J/g°C
Therefore, the specific heat of the unknown metal "X" is approximately 0.50 J/g°C.
To learn more about specific heat click here:
brainly.com/question/31608647
#SPJ11
What is the weight of a 156O−kg car?
The weight of a 1560 kg car is approximately 15,317 Newtons (N). Weight is a measure of the force of gravity acting on an object, and it is calculated by multiplying the mass of the object by the acceleration due to gravity.
In this case, the mass of the car is 1560 kg. The standard acceleration due to gravity on Earth is approximately 9.8 m/s². By multiplying the mass (1560 kg) by the acceleration due to gravity (9.8 m/s²), we find that the weight of the car is approximately 15,317 N.
The weight of an object is directly proportional to its mass and the acceleration due to gravity. In this case, the mass of the car is given as 1560 kg. The acceleration due to gravity is a constant value on Earth, approximately 9.8 m/s².
To calculate the weight, we multiply the mass (1560 kg) by the acceleration due to gravity (9.8 m/s²). This yields a weight of approximately 15,317 N. Weight is a force, and it is measured in Newtons (N). Therefore, a 1560 kg car would weigh approximately 15,317 N on Earth.
Learn more about gravity click here:
brainly.com/question/31321801
#SPJ11
A transformer has 680 primary turns and 11 secondary turns. (a) If Vp is 120 V (rms), what is Vs with an open circuit? If the secondary now has a resistive load of 22 12, what is the current in the (b) primary and (c) secondary? (a) Number 1.9 Units V (b) Number 0.088 Units A (c) Number 1.4E-3 Units V
The current in the primary is 5.42 A (or 5420 mA) and the final answer is, (a) 1.9 V, (b) 0.088 A and (c) 1.4E-3 V.
Primary turns (Np) = 680
Secondary turns (Ns) = 11
Primary voltage (Vp) = 120 Vrms
(a) When there is no load, it means the secondary winding is an open circuit.
Therefore, the voltage across the secondary (Vs) can be calculated using the turns ratio formula as:
Vs/Vp = Ns/NpVs/120 = 11/680Vs = 1.9 V
(b) Resistive load in secondary = 22 ΩThe current in the secondary (Is) can be calculated using Ohm’s law as:Is = Vs/Rs
Where Rs = 22 Ω, Vs = 1.9 VIs = Vs/Rs = 1.9/22 = 0.088 A (or 88 mA)
(c) The current in the primary (Ip) can be calculated using the relation:
Vs/Vp = Ns/NpIs/IpIp = Is × Np/NsIp = 0.088 × 680/11Ip = 5.42 A
Therefore, the current in the primary is 5.42 A (or 5420 mA).
Hence, the final answer is, (a) 1.9 V, (b) 0.088 A and (c) 1.4E-3 V.
Learn more about current with the given link,
https://brainly.com/question/1100341
#SPJ11
A disk starts from rest and takes 3.0 s to reach 2,000 rpm. Assume that the disk rotates with constant angular acceleration and that its moment of inertia is 2.5 x 10-5 kg m². Determine the torque applied to the disk.
Assuming that the disk rotates with constant angular acceleration and that its moment of inertia is 2.5 x 10-5 kg m².The torque applied to the disk is 0.0825 Nm.
We are given that the disk starts from rest and reaches a rotational speed of 2,000 rpm in 3.0 seconds. We can convert this angular velocity to radians per second by multiplying it by [tex]\frac{2\pi }{60}[/tex] since there are 2π radians in one revolution and 60 seconds in a minute. Thus, the final angular velocity (ω) of the disk is (2000 * [tex]\frac{2\pi }{60}[/tex]) = 209.44 rad/s.
To determine the torque applied to the disk, we can use the equation τ = Iα, where τ represents torque, I is the moment of inertia, and α is the angular acceleration.
Since the disk starts from rest, the initial angular velocity (ω₀) is 0. We can calculate the angular acceleration (α) using the equation α = (ω - ω₀) / t, where t is the time interval. Substituting the given values, we have α = [tex]\frac{(209.44 - 0)}{3.0}[/tex] = 69.813 rad/s².
Now we can calculate the torque by rearranging the equation τ = Iα to τ = (2.5 x 10⁻⁵ kg m²) × (69.813 rad/s²) = 0.0825 Nm. Therefore, the torque applied to the disk is 0.0825 Nm.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A crate of mass 5 kg is initially at rest on an inclined plane at the point 'A. It is then pulled up the incline by a constant force F = 93 N, which is parallel to the incline. The coefficient of friction between the crate and the inclined plane is 0.21, and the angle of incline is 30°. The point 'B' is L = 2.9 m from the point 'A: Calculate a) the work done by the force to pull the crate from 'A' to 'B. b) the kinetic energy of the crate when it crosses the point 'B! Write the kinetic energy as your answer in canvas.
(a) The work done by the force to pull the crate from point 'A' to 'B' is approximately 226.18 Joules.
(b) The kinetic energy of the crate when it crosses point 'B' is 226.18 Joules.
(a) The work done by a force can be calculated using the formula:
Work = Force × Distance × cos(θ)
Where:
Force = 93 N
Distance = L = 2.9 m
θ = angle of incline = 30°
Substituting the values into the formula:
Work = 93 N × 2.9 m × cos(30°)
Calculating the cosine of 30°:
cos(30°) = √3/2 ≈ 0.866
Work ≈ 93 N × 2.9 m × 0.866 ≈ 226.18 J
Therefore, the work done by the force to pull the crate from point 'A' to 'B' is approximately 226.18 Joules.
(b) The kinetic energy of an object can be calculated using the formula:
Kinetic Energy = (1/2) × Mass × Velocity^2
Since the crate starts at rest at point 'A' and is pulled up the incline by a constant force, we can assume it reaches point 'B' with a constant velocity.
To find the velocity, we can use the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy.
The work done in part (a) is equal to the change in kinetic energy, so we can equate the two:
Work = Change in Kinetic Energy
Therefore, the kinetic energy at point 'B' is equal to the work done in part (a):
Kinetic Energy = 226.18 J
Hence, the kinetic energy of the crate when it crosses point 'B' is 226.18 Joules.
learn more about "kinetic energy":- https://brainly.com/question/8101588
#SPJ11
Question 14 (2 points) Listen In its own rest frame a certain particle exists, from its creation until its subsequent decay, for 1 micro-second. Relative to a certain laboratory it travels with a spee
In its rest frame, a particle exists for 1 microsecond until its decay. But relative to a laboratory, it moves at a speed that is very close to that of light and for a shorter time. In this situation, special relativity can be applied to see what happens to the time and space measurements of the particle during its movement.
What is special relativity Special relativity is a theory developed by Albert Einstein in 1905, which revolutionized the understanding of time and space. This theory provides a means of calculating the physical measurements of space and time for objects that are moving relative to each other at high speeds (close to the speed of light).
This theory describes the fundamental laws of physics and how the physical laws apply to the objects in motion at high speeds. This theory is essential to modern physics and helps to explain the behavior of subatomic particles. It shows how space and time are intertwined, and that they are not separate concepts.
Instead, they are intertwined and become spacetime. Special relativity is applicable only in the absence of gravitational fields. What happens to time in special relativity In special relativity, time is not absolute but is relative to the observer. Time dilation is one of the key phenomena in special relativity, which shows that time passes more slowly for objects moving at high speeds relative to those that are stationary.
To know more about relativity visit:
https://brainly.com/question/31293268
#SPJ11
A particle with a charge of −1.24×10 −8 C is moving with Part A instantaneous velocity v =(4.19×10 4 m/s) i ^ +(−3.85×10 4 m/s) j ^ What is the force exerted on this particle by a magnetic field B =(2.80 T) i ^ ? Express the x,y, and z components of the force in newtons separated by commas Part B What is the force exerted on this particle by a magnetic field B =(2.80 T) k ^ ? Express the x,y, and z components of the force in newtons separated by commas
Thus, the force components are:
Part A: 0 N, 0 N, -1.71×[tex]10^{-3}[/tex] N
Part B: -1.71×[tex]10^{-3}[/tex] N, 0 N, 0 N
To calculate the force exerted on the particle by a magnetic field, we can use the equation:
F = q * (v x B)
where F is the force, q is the charge, v is the velocity vector, and B is the magnetic field vector.
Given:
Charge (q) = -1.24×[tex]10^{-8}[/tex]C
Velocity (v) = (4.19×[tex]10^4[/tex] m/s) i^ + (-3.85×[tex]10^4[/tex] m/s) j^
Magnetic Field (B) = (2.80 T) i^
Part A:
To find the force components in the x and y directions, we can substitute the given values into the equation:
F = (-1.24×[tex]10^{-8}[/tex] C) * ((4.19×[tex]10^4[/tex]m/s) i^ + (-3.85×[tex]10^4[/tex] m/s) j^) x (2.80 T) i^
Expanding and simplifying, we get:
F = (-1.24×[tex]10^{-8}[/tex]C) * (4.19×[tex]10^4[/tex]m/s) * (2.80 T) k^
The force in the x, y, and z components is given by:
Fx = 0 N
Fy = 0 N
Fz = (-1.24×[tex]10^{-8}[/tex]C) * (4.19×[tex]10^4[/tex] m/s) * (2.80 T) = -1.71×[tex]10^{-3 }[/tex] N
Part B:
In this case, the magnetic field is in the z-direction (k^). Therefore, the force components in the x, y, and z directions are:
Fx = (-1.24×[tex]10^{-8}[/tex]C) * (4.19×[tex]10^4[/tex] m/s) * (2.80 T) = -1.71×[tex]10^{-3 }[/tex]N
Fy = 0 N
Fz = 0 N
Thus, the force components are:
Part A: 0 N, 0 N, -1.71×[tex]10^{-3 }[/tex] N
Part B: -1.71×[tex]10^{-3 }[/tex] N, 0 N, 0 N
Learn more about force, here:
https://brainly.com/question/30507236
#SPJ4
The speed of light with a wavelength 589 nm in light flint glass is 1.90x10^8 m/s. What is an index of refraction of the glass at this wavelength?
The index of refraction of the glass at this wavelength is 1.5773.
The index of refraction of a medium describes how much the speed of light in the medium differs from its speed in a vacuum.
According to the formula,
n = c / v
where n is the refractive index of the medium, c is the speed of light in a vacuum (299,792,458 m/s), and v is the speed of light in the medium.
We have, Given: λ = 589 nm = 589 × 10⁻⁹ m, v = 1.90 × 10⁸ m/s
We need to calculate n.
We can calculate the speed of light in the medium by dividing the speed of light in a vacuum by the refractive index of the medium,
v = c / n
Here, c = 299,792,458 m/s.
Substituting the given values, 1.90 × 10⁸ m/s = (299,792,458 m/s) / n
Solving this for n, we get:
n = (299,792,458 m/s) / (1.90 × 10⁸ m/s)= 1.5773
To know more about refraction visit:
https://brainly.com/question/13088981
#SPJ11
Silver is a metallic element, with well-known physical properties. The volume
mass density p of silver (to 4 sig. figs) is
Silver is a metallic element, with well-known physical properties. The volume mass density (ρ) of silver (Ag) to four significant figures is 10,490 kg/m³.
Density is defined as mass per unit volume.
ρ = mass/volume (ρ = m/V)
The density of a substance can be measured by two methods.
They are:
Mass method:In this method, the mass of the given substance is measured using an electronic balance, and the volume of the substance is determined using a measuring cylinder or a burette.
Volume method:In this method, the volume of the given substance is measured using a volumetric flask or a graduated cylinder, and the mass of the substance is determined using an electronic balance.
The density of silver is approximately 10,490 kg/m³ (kilograms per cubic meter) or 10.50 g/cm³ (grams per cubic centimeter) when rounded to four significant figures.
This means that for every cubic centimeter (or milliliter) of silver, it weighs 10.50 grams. Similarly, for every cubic meter of silver, it weighs 10,490 kilograms.
Learn more about density here:
https://brainly.com/question/1354972
#SPJ11
Figure 5: Question 1. A mass M=10.0 kg is connected to a massless rope on a frictionless inline defined by angle 0=30.0° as in Figure 5. The mass' is lowered from height h=2.20 m to the bottom at a constant speed. 26 A. Calculate the work done by gravity. B. Calculate the work done by the tension in the rope. C. Calculate the net work on the system. a Bonus. Suppose instead the mass is lowered from rest vo=0 at height h and reaches a velocity of v=0.80 m/s by the time it reaches the bottom. Calculate the net work done on the mass.
A. The work done by gravity is calculated using the formula W_gravity = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height.
A. To calculate the work done by gravity, we can use the formula W_gravity = mgh, where m is the mass of the object (10.0 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the height through which the object is lowered (2.20 m).B. The work done by the tension in the rope can be calculated using the same formula as the work done by gravity, W_tension = mgh. However, in this case, the tension force is acting in the opposite direction to the displacement.
C. The net work on the system is the sum of the work done by gravity and the work done by the tension in the rope. We can calculate it by adding the values obtained in parts A and B.
The final kinetic energy can be calculated using the formula KE = (1/2)mv^2, where m is the mass of the object and v is its final velocity (0.80 m/s). The net work done is then equal to the difference in kinetic energy, which can be calculated as the final kinetic energy minus the initial kinetic energy.
To learn more about work done by gravity, Click here:
https://brainly.com/question/16865591
#SPJ11
MY NOTES ASK YOUR TEACHER 2. [-/4 Points) DETAILS OSCOLPHYS2016 17.3.P.015. A sound wave traveling in 20'sir hom a pressure amplitude of 0.305 Pa What intensity level does the sound correspond to? (Assume the density of air is 1.29 kg/m Enter your answer in ) ав
The sound wave traveling in air with a pressure amplitude of 0.305 Pa corresponds to an intensity level of 75.4 dB
Intensity level is a measure of the sound energy carried by a wave per unit area and is expressed in decibels (dB). The intensity level is determined by the formula: IL = 10 log10(I/I0), where I is the sound intensity and I0 is the reference intensity of 10^(-12) W/m².
In this case, we need to calculate the intensity level using the given pressure amplitude. The pressure amplitude and intensity are related through the equation I = (p^2)/(2ρc), where p is the pressure amplitude, ρ is the density of the medium (in this case air), and c is the speed of sound in the medium.
By substituting the given values, we find the intensity to be approximately 1.488 × 10^(-4) W/m². Plugging this value into the intensity level formula, we obtain the final result of 75.4 dB
This indicates the sound corresponds to a moderate level of intensity, falling between conversational speech and background music in terms of loudness.
Learn more about pressure here:
brainly.com/question/30673967
#SPJ11
What is the magnetic field at the midpoint of two long parallel wires 20.0cm
apart that carry currents of 5.0 and 8.0 in the same direction?
The answer is 6mT. Can someone show how to do it
Two parallel wires carrying current produce magnetic fields. The magnetic field at the midpoint of two long parallel wires 20.0 cm apart that carry currents of 5.0 and 8.0 A in the same direction is 6.00 mT.
It can be solved by using the formula for the magnetic field produced by a straight current-carrying wire.
B = μ₀ I / 2 π r
where B is the magnetic field,
μ₀ is the permeability of free space,
I is the current,
and r is the distance from the wire.
At the midpoint of the two wires, the magnetic field due to one wire is given by:
B1 = (μ₀ I1) / (2 π r)
and the magnetic field due to the other wire is given by:B2 = (μ₀ I2) / (2 π r)
The total magnetic field at the midpoint of the two wires is given by;B = B1 + B2
whereB1 is the magnetic field due to one wire
B2 is the magnetic field due to the other wire
I1 = 5.0 AI2 = 8.0 Aμ₀ = 4π × 10⁻⁷ T m / A
From the given question, the distance between the two wires is 20.0 cm = 0.20 m.
Hence the distance from each wire is;
r = 0.20 m / 2 = 0.10 m
The magnetic field due to each wire is:
B1 = (4π × 10⁻⁷ T m / A) (5.0 A) / (2 π × 0.10 m)
= 10⁻⁶ T (or 1.00 mT)andB2
= (4π × 10⁻⁷ T m / A) (8.0 A) / (2 π × 0.10 m)
= 1.6 × 10⁻⁶ T (or 1.60 mT)
Therefore, the total magnetic field at the midpoint of the two wires is given by:
B = B1 + B2
= 1.00 mT + 1.60 mT
= 2.60 mT
= 2.60 × 10⁻³ T
The answer is 6mT.
To know more about distance, visit:
https://brainly.com/question/26711747
#SPJ11
In the provided circuit, if the battery EMF is 19 V, what is the power dissipated at the 9Ω resistor? (in W ) Your Answer: Answer
The power dissipated at the 9Ω resistor is 36W. The circuit diagram of the given circuit is shown below.
The voltage drop across the 9 Ω resistor is calculated using Ohm's law, which is as follows:
V = IRI = V/R
Since the resistance of the 9 Ω resistor is R and the current flowing through it is I. Therefore, I = 2 A. As a result, V = IR = 9 Ω × 2 A = 18 V.
The power P is calculated using the following formula:
P = V2/R = 18 x 18/9 = 36 W
Therefore, the power dissipated by the 9Ω resistor is 36W.
In an electrical circuit, the power P consumed by the resistor is given by the following equation:
P = V2/R
where V is the potential difference across the resistor and R is the resistance of the resistor.
As per the given circuit diagram:
Potential difference, V = 19V
Resistance, R = 9Ω
Therefore, P = V2/R = (19V)2/(9Ω) = 361/9 W = 36 W
Learn more about Ohm's law: https://brainly.com/question/1247379
#SPJ11
A simple pendulum consists of a small object of mass m= 1.52 kg hanging under a massless string of length L= 8 m. The pendulum swings with angular frequency ω=5.77 rads. If the mass is changed to 2 m and the length of the string is change to 6 L, the frequency of this new pendulum becomes nω . What is the value of n? Please round your answer to 2 decimal places.
The value of n, which represents the change in frequency, is approximately 3.16 when the mass of the pendulum is doubled and the length of the string is increased to 6 times its original length.
The frequency of a pendulum is given by the formula f = (1/2π) * √(g/L), where g is the acceleration due to gravity and L is the length of the string. Since the angular frequency ω is related to the frequency by ω = 2πf, we can rewrite the formula as ω = √(g/L).
In the first scenario, where the mass is 1.52 kg and the length is 8 m, the angular frequency is given as ω = 5.77 rad/s. Solving the equation for L, we find L = g/(ω²).
In the second scenario, where the mass is changed to 2 m and the length is increased to 6L, the new length L' becomes 6 times the original length L. Using the formula for the new angular frequency ω' = √(g/L'), we substitute L' = 6L and solve for ω'.
Now we can find the ratio of the new angular frequency ω' to the original angular frequency ω: n = ω'/ω. Plugging in the values and simplifying, we find n = √(L/L') = √(8/6) ≈ 3.16, rounded to 2 decimal places. Therefore, the value of n is approximately 3.16.
To learn more about angular frequency i
Click here brainly.com/question/30897061
#SPJ11
N11M.1 Is the center of mass of the earth/moon system inside the earth? The earth-moon system viewed from space (see problem N11M.1). (Credit: NASA)
Yes, the center of mass of the Earth-Moon system is located inside the Earth.
Earth-Moon system can be defined as a two-body system, where both Earth and Moon orbit around their common center of mass. However, because Earth is much more massive than the Moon, the center of mass is much closer to the center of the Earth.
The center of mass of the Earth-Moon system is located 1,700 kilometers (1,056 miles) beneath the Earth's surface. Suppose, if you were to draw an imaginary line connecting the center of the Earth to the center of the Moon, the center of mass will be closer to the Earth's center.
From space, the Earth-Moon system seems as if the Moon is orbiting around the Earth, but actually, both the Earth and the Moon are in motion around to their common center of mass.
Hence, this statement is right that the center of mass of the Earth/moon system is inside the Earth.
Learn more about orbit here:
brainly.com/question/32355752
#SPJ4
Find the energy (in eV) of a photon with a frequency of 1.8 x 10^16 Hz.
The energy of a photon is approximately 1.2 electron volts (eV).
The energy of a photon can be calculated using the formula E = hf, where E is the energy, h is Planck's constant, and f is the frequency of the photon. For a photon with a frequency of
[tex]1.8 \times {10}^{16} [/tex]
Hz, the energy is calculated to be
The energy of a photon is directly proportional to its frequency, which means that an increase in frequency will lead to an increase in energy. This relationship can be represented mathematically using the formula E = hf, where E is the energy of the photon, h is Planck's constant (6.63 x 10^-34 J·s), and f is the frequency of the photon.
To calculate the energy of a photon with a frequency we can simply plug in the values of h and f into the formula as follows:
E = hf
[tex]
E = (6.63 \times {10}^{ - 17} J·s) x \times (1.8 \times {10}^{16} Hz)
E = 1.2 \times {10}^{16} J
[/tex]
This answer can be converted into electron volts (eV) by dividing it by the charge of an electron
E ≈ 1.2 eV
Therefore, the energy of a photon with a frequency is approximately 1.2 eV. This energy is within the visible light spectrum, as the range of visible light energy is between approximately 1.65 eV (violet) and 3.26 eV (red).
To learn more about photon click brainly.com/question/30858842
#SPJ11
A mass m = 1.69 kg hangs at the end of a vertical spring whose top end is
fixed to the ceiling. The spring has spring constant k = 89 N/m and negligible mass. At time t = 0
the mass is released from rest at a distanced = 0.53 m below its equilibrium height and then
undergoes simple harmonic motion
The phase angle of the motion is π/2 - φ radians. The amplitude is, 0.53 m. The mass's velocity at time t = 0.29 s is approximately 1.3 m/s.
(a) Phase angle of the motion, ФThe phase angle of the motion is given by the equation:
[tex]$$\phi = \cos^{-1}(\frac{x}{A})$$[/tex]
where x is the displacement of the object from its mean position and A is the amplitude of the motion. Here, the displacement of the mass is d = 0.53 m. Amplitude can be determined by the given formula:
[tex]$$\frac{k}{m} = \frac{4\pi^{2}}{T^{2}}$$[/tex]
where T is the time period of the motion. For vertical spring, the time period of the motion is given by:
[tex]$$T = 2\pi\sqrt{\frac{m}{k}}$$[/tex]
[tex]$$T = 2\pi\sqrt{\frac{1.69}{89}} = 0.5643 s$$[/tex]
Amplitude, A can be calculated as follows:
[tex]$$A = \frac{d}{\sin(\phi)}$$[/tex]
Substituting given values in the above equation:
[tex]$$A = \frac{0.53}{\sin(\phi)}$$[/tex]
To find out the phase angle, substitute values in the first formula:
[tex]$$\phi = \cos^{-1}(\frac{0.53}{A})$$[/tex]
Substituting the value of A from above equation, we get:
[tex]$$\phi = \cos^{-1}(\frac{0.53}{\frac{0.53}{\sin(\phi)}})$$[/tex]
[tex]$$\phi = \cos^{-1}(\sin(\phi)) = \pi/2 - \phi = \pi/2 - \cos^{-1}(\frac{0.53}{A})$$[/tex]
Therefore, the phase angle of the motion is [tex]$\pi/2 - \cos^{-1}(\frac{0.53}{A})$[/tex] radians.
(b) Amplitude of the motion, A
From the above calculations, the amplitude of the motion is found to be A = 0.53/sin(Ф).
(c) The mass's velocity at time t = 0.29 s, v
The equation for the velocity of the object in simple harmonic motion is given by:
[tex]$$v = A\omega\cos(\omega t + \phi)$$[/tex]
where, ω = angular velocity = [tex]$\frac{2\pi}{T}$[/tex] = phase angle = [tex]$\phi$[/tex]
A = amplitude
Substituting the given values in the above formula, we get:
[tex]$$v = 0.53(\frac{2\pi}{0.5643})\cos(\frac{2\pi}{0.5643}\times0.29 + \pi/2 - \cos^{-1}(\frac{0.53}{A}))$$[/tex]
So, the mass's velocity at time t = 0.29 s is approximately 1.3 m/s.
The question should be:
We have a mass of m = 1.69 kg hanging at the end of a vertical spring that is fixed to the ceiling. The spring possesses a stiffness characterized by a spring constant of 89 N/m and is assumed to have a negligible mass. At t = 0, the mass is released from rest at a distance of d = 0.53 m below its equilibrium height, leading to simple harmonic motion.
(a) What is the phase angle of the motion in radians? Denoted as Ф.
(b) What is the amplitude of the motion in meters?
(c) At t = 0.29 s, what is the velocity of the mass in m/s?
Learn more about amplitude at: https://brainly.com/question/3613222
#SPJ11