a rectangular poster is to contain 392 square inches of print. the margins at the top and bottom of the poster are to be 2 inches, and the margins on the left and right are to be 1 inch. what should the dimensions of the poster be (in inches) so that the least amount of poster is used? (enter your answers as a comma-separated list.)

The number of favorable outcomes for spinning the same color twice will depend on the number of colors on the spinner.

If there are only two colors on the spinner, such as red and blue, then there will be only one favorable outcome, which is spinning either red or blue twice.

If there are more than two colors on the spinner, the number of favorable outcomes will depend on the number of times each color appears on the spinner.

For example, if there are four colors on the spinner, and each color appears equally, then there will be four favorable outcomes: spinning red twice, spinning blue twice, spinning green twice, or spinning yellow twice.

In general, if there are n colors on the spinner and each color appears with equal probability, then the number of favorable outcomes for spinning the same color twice will be n.

To know more about probability refer here

https://brainly.com/question/34187875#

#SPJ11

(A) The length that beats 80 seconds is 256 cm.

(B) The time of a pendulum with length 36 cm is 30 seconds.

(A) According to the given information, the time of a pendulum varies as the square root of its length. Let's denote time as T and length as L. Therefore, T ∝ √L. To find the constant of proportionality, we can use the provided data: T1 = 15 seconds and L1 = 9 cm. So, we have T1 / √L1 = k, where k is the constant. Now, let's find k: k = 15 / √9 = 15 / 3 = 5.

Now, we want to find the length (L2) of a pendulum that beats 80 seconds (T2). We can use the formula T2 = k * √L2. Substituting the values, we get 80 = 5 * √L2. To find L2, we can rearrange and solve for it: L2 = (80 / 5)² = 16² = 256 cm.

(B) To find the time (T3) of a pendulum with a length of 36 cm (L3), we can use the same formula with the known constant k: T3 = k * √L3. Substituting the values, we get T3 = 5 * √36 = 5 * 6 = 30 seconds.

In conclusion, the length of a pendulum that beats 80 seconds is 256 cm, and the time of a pendulum with a length of 36 cm is 30 seconds.

To know more about pendulum, refer to the link below:

https://brainly.com/question/29268528#

#SPJ11

Answer:

[tex]s = \frac{3(1 - {6}^{9}) }{1 - 6} = 6046617[/tex]

The sum of this finite geometric series is 6,046,617.

Answer: around 2.6 cm because I rounded to the tenth.

Step-by-step explanation:

r^2=170/8.1×3.14

r^2=170/25.434

r^2≈6.68

Next square root both sides so r^2 becomes r and 6.68 square rooted is about 2.6 cm is the radius.

R≈2.6cm

m > 8 is an inequality used to calculate the number of articles Mustafa could have written.

Let's assume that Mustafa has written m articles for the school newspaper.

Then, according to the given information:

Heloise has written 1/4 as many articles as Mustafa has, which means she has written 1/4 × m = m/4 articles.

Gia has written 3/2 as many articles as Mustafa has, which means she has written 3/2 × m = 3m/2 articles.

The combined total of articles written by all three is more than 22, so we can write:

m/4 + 3m/2 + m > 22

Simplifying and solving for m:

11m/4 > 22

m > 22 × 4/11

m > 8

Therefore, m > 8 is an inequality used to calculate the number of articles Mustafa could have written.

Learn more about Inequality here

https://brainly.com/question/20383699

#SPJ1

The missing measures are BC ≈ 23.77, angle BCA = 24 degrees, AB ≈ 56.77, and CD ≈ 56.77.

To solve the problem, we can use the properties of rectangles and trigonometry.  Since ABCD is a rectangle, we know that angle ABC is also 90 degrees.

Using the Pythagorean theorem, we can find the length of BC:

BC² = AB² - AC²

BC² = 9² + 22²

BC² = 565

BC ≈ 23.77

Using the fact that the sum of the angles in triangle ABC is 180 degrees, we can find the measure of angle BCA

m(BCA) = 180 - m(ABC) - m(CAB)

m(BCA) = 180 - 90 - 66

m(BCA) = 24 degrees

Using trigonometry, we can find the length of AB

sin(24) = AC/AB

AB = AC/sin(24)

AB ≈ 56.77

Finally, we can find the length of CD, which is equal to AB

CD = AB ≈ 56.77

Therefore, the measures of AB ≈ 56.77, and CD ≈ 56.77.

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ4

A row parallel to the line y = 4 on a coordinate grid would be represented by a line with an equation of the form y = c.

A coordinate grid is a two-dimensional plane consisting of a horizontal x-axis and a vertical y-axis. The point where the x and y-axes intersect is called the origin, and it has coordinates (0, 0).

An equation in the form y = c, where c is a constant, represents a horizontal line parallel to the x-axis. In this case, the equation y = 4 represents a horizontal line that intersects the y-axis at 4, as all points on the line have a y-coordinate of 4.

To find a row parallel to this line, we need to look for another line that also has a constant y-coordinate of 4. One way to represent this line is by the equation y = 4 again, since all points on this line have a y-coordinate of 4.

Alternatively, we can look for an equation in the form y = mx + b, where m is the slope of the line (which is zero for a horizontal line), and b is the y-intercept (which is 4 in this case). Thus, the equation for the row parallel to y = 4 would also be y = 4, since its slope is zero and it intersects the y-axis at y = 4, just like the line y = 4.

Learn more about coordinate grid

brainly.com/question/17597121

#SPJ11

The height of the real boat is 3 inches and  length of the boat is 45 feet

What is Unit of Measurement?

A unit of measurement is a definite magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of quantity.

In a scale model of a boat 1 inch represents 5 feet

1 inch =  5 feet

The height of the real boat is 15 feet

We have to find in inches

1/5=x/15

x=3 inches

So height of the real boat is 3 inches

The length of the boat is 9 inches

We have to find in feet

1/5 = 9/x

x=45 feet

Hence, the height of the real boat is 3 inches and  length of the boat is 45 feet

To learn more on Unit of Measurement click:

https://brainly.com/question/15402847

#SPJ2

Ted spent 67 minutes reading.

First, let's determine how long Jared spent reading:

Jared = Pete - 52 minutes

Jared = 3 hours * 60 minutes/hour - 52 minutes

Jared = 148 minutes

Now we can use the fact that Ted spent 1 hour 21 minutes less than Jared:

Ted = Jared - 1 hour 21 minutes

Ted = 148 minutes - 81 minutes

Ted = 67 minutes

Learn more about minutes

brainly.com/question/15600126

#SPJ11

Answer:

Step-by-step explanation:

f(x) = ax² + bx + c      a= -8

f(x) = -8x² + bx + c     that a controls the direction and the stretch.

So the function will be stretched by 8.  The negative represents the direction because, it's negative, it will be facing down.  

Not sure how your class describes it but it could be facing down, concaved down, or expands downward.  

Answer:

The perfect factored square trinomial that is equivalent to the expression x^2 + 8x + 16 is:

(x + 4)^2

To see why this is the case, you can expand the expression (x + 4)^2 using the FOIL method:

(x + 4)^2 = (x + 4) * (x + 4)

= x^2 + 4x + 4x + 16

= x^2 + 8x + 16

So, x^2 + 8x + 16 can be factored as (x + 4)^2, which is a perfect square trinomial.

The 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list falls between 0.194 and 0.286.

To construct the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list, we can use the following formula:

[tex]\hat{p} \pm z^* \sqrt{\frac{\hat{p} (1 - \hat{p})}{n}}[/tex]

where [tex]$\hat{p}$[/tex] is the sample proportion, [tex]$n$[/tex] is the sample size, and [tex]$z^*$[/tex] is the z-score corresponding to the desired level of confidence. Since we are looking for an 85% confidence interval, the z-score is 1.440.

First, we can calculate the sample proportion:

[tex]\hat{p} = \frac{109}{455} = 0.240[/tex]

Next, we can plug in the values into the formula:

[tex]$$ 0.240 \pm 1.440 \sqrt{\frac{0.240 (1 - 0.240)}{455}} $$[/tex]

Simplifying this expression, we get:

[tex]$$ 0.240 \pm 0.046 $$[/tex]

Therefore, the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list is [tex]$(0.194, 0.286)$[/tex].

We can interpret this interval as follows: if we were to draw many samples of size 455 from the population of people who appear on the 10 Most Wanted list, and construct a 85% confidence interval for the proportion of people who are captured based on each sample, about 85% of these intervals would contain the true population proportion.

Furthermore, we are 85% confident that the true population proportion of people who are captured after appearing on the 10 Most Wanted list falls between 0.194 and 0.286.

To learn more about  confidence interval refer here:

https://brainly.com/question/29680703

#SPJ11

The value of m that makes the inequality  4m + 8 < 36 true is m = 1 for the set of numbers 1 7 11 and 36 contains values for m.

An inequality is a mathematical expression in which the values on the left side of an equation are not equal to the values on the right side, but instead are either greater than or less than the values on the right side.

To find the value of m that makes the inequality 4m + 8 < 36 true, given the set of numbers {1, 7, 11, 36},

Now, we know that the value of m should be less than 7. From the given set of numbers {1, 7, 11, 36}, only 1 is less than 7. Therefore, the value of m that makes the inequality true is m = 1.

To learn more about inequality : https://brainly.com/question/25275758

#SPJ11

The ratios are 1. Current ratio = 2.90, 2. Acid-test ratio = 2.22, 3. Inventory turnover ratio = 3.57, 4. Debt to equity ratio = 0.77, 5. Return on equity ratio = 15%.

The ratios to be computed are:

1. Current ratio

2. Acid-test (quick) ratio

3. Inventory turnover ratio

4. Debt to equity ratio

5. Return on equity ratio

1. Current ratio = Current assets / Current liabilities

Current assets = Cash + Accounts receivable + Inventory = $17,205 + $80,290 + $68,820 = $166,315

Current liabilities = Accounts payable = $57,350

Current ratio = $166,315 / $57,350 = 2.90

2. Acid-test (quick) ratio = (Cash + Accounts receivable) / Current liabilities

Acid-test ratio = ($17,205 + $80,290) / $57,350 = 2.22

3. Inventory turnover ratio = Cost of goods sold / Average inventory

Average inventory = (Beginning inventory + Ending inventory) / 2

Beginning inventory = $57,350

Ending inventory = $68,820

Average inventory = ($57,350 + $68,820) / 2 = $63,085

Inventory turnover ratio = $225,600 / $63,085 = 3.57

4. Debt to equity ratio = Total liabilities / Total equity

Total liabilities = Accounts payable + Mortgage payable = $57,350 + $114,700 = $172,050

Total equity = Common stock + Retained earnings = $160,580 + $63,085 = $223,665

Debt to equity ratio = $172,050 / $223,665 = 0.77

5. Return on equity ratio = Net income / Average equity

Average equity = (Beginning equity + Ending equity) / 2

Beginning equity = Common stock + Retained earnings = $137,640 + $45,880 = $183,520

Ending equity = Common stock + Retained earnings + Net income - Dividends = $160,580 + $63,085 + $31,100 - $21,700 = $232,065

Average equity = ($183,520 + $232,065) / 2 = $207,793

Return on equity ratio = $31,100 / $207,793 = 0.15 or 15%

Therefore, the ratios are:

1. Current ratio = 2.90

2. Acid-test ratio = 2.22

3. Inventory turnover ratio = 3.57

4. Debt to equity ratio = 0.77

5. Return on equity ratio = 15%

To know more about ratios , refer here :

https://brainly.com/question/29255670#

#SPJ11

To determine the best estimation for centering the dresser along the wall, we need to consider the length of the wall and the length of the dresser. Let's call the length of the wall "W" and the length of the dresser "D".

Since we don't know the actual values of W and D, we'll have to work with the given options.

Option A suggests placing the dresser about 6 feet from each end of the wall. This would leave a space of W - 12 feet in the middle of the wall, which would be the total space available for the dresser to be centered.

Option B suggests placing the dresser about 8 feet from each end of the wall. This would leave a space of W - 16 feet in the middle of the wall, which would be the total space available for the dresser to be centered.

Option C suggests placing the dresser about 10 feet from each end of the wall. This would leave a space of W - 20 feet in the middle of the wall, which would be the total space available for the dresser to be centered.

Option D suggests placing the dresser about 12 feet from each end of the wall. This would leave a space of W - 24 feet in the middle of the wall, which would be the total space available for the dresser to be centered.

To find the best estimation for centering the dresser along the wall, we need to determine which option provides the closest match between the available space in the middle of the wall and the length of the dresser.

Without knowing the actual values of W and D, it's difficult to say for certain which option is best. However, we can make an educated guess by considering the lengths of typical bedroom walls and dressers.

Based on this, option C (placing the dresser about 10 feet from each end of the wall) seems like a reasonable estimation for centering the dresser along the wall. This option provides a space of W - 20 feet in the middle of the wall, which is likely sufficient for most dressers.

Of course, the actual placement of the dresser will depend on other factors as well, such as the layout of the room and the location of other furniture. It's always a good idea to measure carefully and test different arrangements before settling on a final placement for any piece of furniture.

To know more about length refer here

https://brainly.com/question/30100801#

#SPJ11

Answer:

You are correct.
Hope this helps!

Step-by-step explanation:

The lines intersect at one point and that is the solution.

( The image shows a graph with infinite solutions. ( ignore the Byjus thing i was just trying to find an image that showed an example ... ) )

The equation defines a linear function is A y = 2x/4 + 12

A y = 2x/4 + 12 is the equation that defines a linear function because it can be simplified to y = 1/2x + 12,

Which has a constant slope of 1/2 and a constant rate of change.

The other options are not linear functions because they involve exponents or do not have a constant slope.

Read more about linear function at

https://brainly.com/question/30318449

#SPJ1

each of Jennifer's five kids received 1/40 of the total pan of macaroni and cheese.

What is equivalent ratio?

The concept of a ratio in mathematics is the divisional comparison of two quantities, the antecedent and consequent. As an illustration, each ingredient must be added according to a ratio during cooking. So, we may argue that a ratio is employed to represent one quantity as a portion of another. The ratio can be written as a fraction as well. If the ratio a:b is a fraction, its form is a/b. As a result, it is simple to compare two or more equivalent ratios expressed as equivalent fractions.

If Jennifer had 7/8 of her pan of macaroni and cheese left after supper, this means she had 1 - 7/8 = 1/8 of the pan remaining.

To split the remaining macaroni and cheese evenly between her five kids, we need to divide 1/8 by 5.

1/8 divided by 5 can be written as (1/8) ÷ 5 = (1/8) x (1/5) = 1/40.

Therefore, each of Jennifer's five kids received 1/40 of the total pan of macaroni and cheese.

Learn more about equivalent ratio, by the following link.

https://brainly.com/question/2328454

#SPJ4

The loan future value is $7726.73.

To find the loan future value, we need to calculate the total amount that Robert will owe at the end of the 2-year loan term, including both the principal (initial loan amount) and the interest.

To begin, we can use the formula for calculating compound interest:

[tex]A = P(1 + r/n)^{(nt)[/tex]

where A is the final amount, P is the principal, r is the interest rate, n is the number of times the interest is compounded per year, and t is the time in years.

In this case, we know that the principal is $7200, the interest rate is 4.3% (or 0.043 as a decimal), the loan term is 2 years, and the interest is compounded once per year (n = 1).

Substituting these values into the formula, we get:

A = 7200(1 + 0.043/1)²

A = 7200(1.043)²

A = 7726.73

Therefore, the loan future value is $7726.73. This means that at the end of the 2-year loan term, Robert will owe a total of $7726.73, which includes the original $7200 loan amount and $526.73 in interest.

Know more about future value here:

https://brainly.com/question/14860893

#SPJ11

The latus rectum of an ellipse is 288/13 when the ellipse equation is given as [tex]x^2/169 + y^2/144 = 1[/tex]. Option A is correct.

The standard form of an ellipse equation is given as  

[tex](x2/a2) + (y2/b2) = 1[/tex]

where :

a = lengths of the semi-major axes

b = length of semi-minor axes

The length of the chord through one of the foci that are perpendicular to the major axis is defined as the latus rectum of an ellipse.

From the given data the equation of the ellipse is given as :

x² / 169 + y² / 144 = 1

By comparing the standard equation and the given equation of the ellipse we get :

a² = 169

a = √169

[tex]a = 13[/tex]

b² = 144

b = √144

[tex]b = 12[/tex]

The distance between the center and one of the foci is given by

c = √(a² - b²)

= √(13² - 12²)

= 5

We can find the latus rectum by substuting a and b values in the latus rectum of an ellipse formula,

= 2×b²/a

= 2 × 12² / 13

= 288/13

Therefore, the latus rectum of an ellipse is 288/13.

To learn more about the latus rectum of an ellipse :

https://brainly.com/question/30017551

#SPJ4

The perimeter of the rectangle is represented by the expression 4s - 10.

How to calculate perimeter of a rectangle?

To calculate the perimeter of a rectangle, you need to add up the lengths of all four sides.

In the problem given, we know that the rectangle is 6 inches shorter than the square and 1 inch longer.

Let's call the length of the rectangle l and the width w.

We know that the length of the square is equal to its width (since it's a square), so the length of the rectangle must be l = s - 6, and the width must be w = s + 1.

To find the perimeter, we add up all four sides: P = 2l + 2w = 2(s-6) + 2(s+1) = 4s - 10.

Therefore, the expression that represents the perimeter of the rectangle is 4s - 10.

Learn more about perimeter

brainly.com/question/6465134

#SPJ11

The measures of angle T and S in a right angles triangle STU with side Lengths ST = 10 units and UT = 4 units are equals to

We have a triangle STU has a right angle at U so, we can call it a right angled triangle STU. Length of side ST = 10 units

Length of side TU = 4 units

We have to determine the measure of angle T and measure of angle S.

As we know that sum of inner angles of a triangle = 180°

So, m∠S + m∠T + m∠U = 180°

=> m∠S + m∠T = 180° - 90°

= 90°

Using the trigonometry formula, in right angles triangle STU,

tan (m∠T ) = US/UT

=> m∠T = √86/4

=>

Hence, required value are

For more information about angle, visit :

https://brainly.com/question/1309590

#SPJ4

Complete question:

The above figure completes the question.

In the figure shown, what are ∠ and ∠? Triangle S T U has right angle U and is labeled as follows: S T, 10; T U, 4; and the long leg, unlabeled

1. The price-demand equation for the trumpets is:

   x = 238.18 - 1.09p

2. The manufacturer should set the price of each trumpet at $296.50  to break even        

3. The manufacturer should set the price of each trumpet at $138.63 to maximize profit.

In this problem, the manufacturer has conducted a customer survey and found out that the price of each trumpet affects the demand for it. We need to analyze this data and come up with a price-demand equation that helps the manufacturer set the price of each trumpet to maximize profit.

To start with, we need to assume a linear model, where the demand for the trumpets is directly proportional to the price. We can represent the demand as "x" and the price as "p". Using the data from the survey, we can form two linear equations:

110 = ap + b     (1)

128 = cp + d    (2)

Here, a, b, c, and d are constants that we need to find. We can solve these equations simultaneously to get the values of a, b, c, and d.

Subtracting equation (2) from equation (1), we get:

-18 = (a-c)p + (b-d)   (3)

Dividing both sides of equation (3) by -18, we get:

p = (d-b)/(c-a)          (4)

Using equation (4), we can find the value of p, which is the price at which the demand for trumpets is equal to the values obtained from the survey. Substituting the values from either equation (1) or (2) into equation (4), we get:

p = ($160.74 x 110 - $220.18 x 128)/(-18 x 110 + 18 x 128)

  = $186.46

Therefore, the price-demand equation for the trumpets is:

x = 238.18 - 1.09p

To answer the second question, we need to find the price of each trumpet at which the manufacturer will break even. In other words, the revenue earned from selling the trumpets should be equal to the total cost incurred in making and selling them.

We know that the one-time cost of buying equipment is $3274.78, and each trumpet costs $90.05 to make. Let's represent the break-even price as "[tex]P_{be}[/tex]". Then we can form the following equation:

110[tex]P_{be}[/tex] = 3274.78 + 110 x 90.05

Solving for [tex]P_{be}[/tex], we get:

[tex]P_{be}[/tex]= $296.50

Therefore, the manufacturer should set the price of each trumpet at $296.50 to break even.

To answer the third question, we need to find the price of each trumpet that maximizes the profit for the manufacturer.

The profit is given by the revenue earned minus the total cost incurred. Let's represent the profit as "P" and the price as "p". Then the profit equation becomes:

P = xp - (3274.78 + 90.05x)

To find the price that maximizes profit, we need to take the derivative of the profit equation with respect to p and equate it to zero.

dP/dp = x - 90.05 = 0

Solving for x, we get:

x = 90.05

Substituting this value of x into the price-demand equation, we get:

p = $138.63

Therefore, the manufacturer should set the price of each trumpet at $138.63 to maximize profit.

To know more about Equation here

https://brainly.com/question/17348851

#SPJ4

Andres brought the most milk, and Carlos brought the least milk.

To find out the student who bought the most milk, you need to convert the liters decimals so that they can be compared evenly.

Andrés brought 2²

= 2 x 2

= 4 liters of milk.

Bruno brought 13/4:

= 13 / 4

= 3.25 liters of milk.

Carlos bought 1. 16 liters and Daniel bough 1. 3 liters.

This shows that Andres bought the most milk and Carlos bought the least amount.

Find out more on liters at https://brainly.com/question/17433466

#SPJ1

The derivative formula for the function is

[tex]f'(x) = 342x^4 + 414x^3 + 342x^2 + 418x + 385[/tex]

To find the derivative of the function [tex]f(x) = (9x^2 + 11x + 7)(38x^3 + 35)[/tex], we can use the product rule of differentiation:

f(x) = u(x)v(x)

where [tex]u(x) = (9x^2 + 11x + 7)[/tex] and [tex]v(x) = (38x^3 + 35)[/tex].

The product rule states that:

f'(x) = u'(x)v(x) + u(x)v'(x)

where u'(x) and v'(x) are the derivatives of u(x) and v(x), respectively.

Taking the derivatives, we get:

u'(x) = 18x + 11

[tex]v'(x) = 114x^2[/tex]

Now, substituting everything into the product rule formula, we get:

[tex]f'(x) = (18x + 11)(38x^3 + 35) + (9x^2 + 11x + 7)(114x^2)[/tex]

Simplifying this expression gives the derivative formula for f(x):

[tex]f'(x) = 342x^4 + 414x^3 + 342x^2 + 418x + 385[/tex]

Learn more about derivative formula

brainly.com/question/24516698

#SPJ11

Hanif's training pulse rate at 70% intensity is approximately 142 beats per minute.

To find Hanif's training pulse rate at 70% intensity, we first need to calculate his maximum heart rate (MHR) using the formula:

MHR = 220 - age

Substituting Hanif's age, we get:

MHR = 220 - 14 = 206

Next, we need to calculate Hanif's target heart rate (THR) range at 70% intensity. This range is between 70% and 85% of his MHR. To calculate the lower end of the range, we multiply his MHR by 0.7:

THR lower = 0.7 × MHR = 0.7 × 206 = 144.2 (rounded to one decimal place)

To calculate the upper end of the range, we multiply his MHR by 0.85:

THR upper = 0.85 × MHR = 0.85 × 206 = 175.1 (rounded to one decimal place)

So Hanif's target heart rate range at 70% intensity is between 144.2 and 175.1 beats per minute.

To find his training pulse rate, we add his resting pulse rate (76 beats per minute) to the percentage of his target heart rate range which corresponds to 70% intensity. This is given by:

Training pulse rate = resting pulse rate + (0.7 × (THR upper - resting pulse rate))

Substituting the values we calculated, we get:

Training pulse rate = 76 + (0.7 × (175.1 - 76)) ≈ 142

Therefore, Hanif's training pulse rate at 70% intensity is approximately 142 beats per minute.

Learn more about pulse rate:

brainly.com/question/17960242

#SPJ4

Val's calculation of 1,787.52 m² is incorrect.

What is area of semicircle?

The area of a semicircle is half the area of the corresponding circle. If r is the radius of the semicircle, then the area of the semicircle is:

A(semicircle) = (1/2) π r²

To find the area enclosed by the figure, we need to add the areas of the square and the four semicircles.

The area of the square is:

[tex]A_{square}[/tex] = (56 m)² = 3,136 m²

The area of one semicircle is half the area of the corresponding circle, and the radius of the circle is equal to the side length of the square. Therefore, the area of one semicircle is:

[tex]A_{semicircle}[/tex] = (1/2) π (56/2)²= 1,554.56 m²

The total area enclosed by the figure is:

[tex]A_{total}[/tex] = [tex]A_{square}[/tex]+ 4 [tex]A_{semicircle}[/tex] = 3,136 + 4(1,554.56) = 9,901.44 m²

Therefore, Val's calculation of 1,787.52 m² is incorrect.

To know more about areas visit:

brainly.com/question/16952186

#SPJ9

Question:

Val needs to find the area enclosed by the figure. The figure is made by attaching semicircles to each side of a 56m​-by-56m square. Val says the area is 1,787.52m. Find the area enclosed by the figure. Use 3.14 for π. What error might have Val made?

Check the picture below.

Answer:

since 2x = z

replace z with 2x

900000 = x+y+z

900000 = x+y+2x

900000 = 3x+y - eqn (1)

79750= 0.08x +0.09y+0.01z

79750 = 0.08x +0.09y+0.01(2x)

79750 = 0.08x+0.09y+0.02x

79750 = 0.10x +0.09y - eqn(2)

from eqn(1)

900000 = 3x + y

y = 900000-3x - eqn(3)

substitute eqn(3) in eqn(2)

79750 = 0.1x +0.09y

79750=0.1x + 0.09(900000-3x)

79750=0.1x+ 81000 - 0.27x

collect like terms

79750 -81000 = 0.1x-0.27x

-1250 = -0.17x

to find x divide both sides by -0.17

x = -1250/-0.17 ~= 7353

since 2x = z

2*7353 = 14706

in eqn(3)

y = 900000-3x

y= 900000-3(7353)

y = 900000-22059

y = 877941

x =7353,y= 877941,z=14706