After four half-lives, 12.5 grams of the parent isotope will be left in a sample that originally contained 140 grams of an unstable isotope.
The amount of the parent isotope remaining after a certain number of half-lives can be calculated using the formula:
Remaining amount = Initial amount x (1/2)^(number of half-lives)
For this problem, the initial amount of the unstable isotope is 140 g, and it goes through 4 half-lives.
One half-life is the time it takes for half of the original sample to decay, and the number of half-lives is equal to the total time elapsed divided by the length of one half-life.
If we know the half-life of the isotope, we can find the total time elapsed. Let's assume the half-life of the isotope is 10 days.
After 10 days, half of the initial sample will remain:
Remaining amount = 140 g x (1/2)¹ = 70 g
After another 10 days (20 days total), half of the remaining sample will decay:
Remaining amount = 70 g x (1/2)¹ = 35 g
After another 10 days (30 days total), half of the remaining sample will decay again:
Remaining amount = 35 g x (1/2)¹ = 17.5 g
After another 10 days (40 days total), half of the remaining sample will decay once more:
Remaining amount = 17.5 g x (1/2)¹ = 8.75 g
Therefore, after 4 half-lives (40 days), there will be approximately 8.75 g of the parent isotope remaining.
To know more about the half-lives refer here :
https://brainly.com/question/30599798#
#SPJ11
You want to completely boil 500g of water that is at 15°C. How much energy is needed to accomplish this?
The amount of energy required to boil water depends on the initial temperature of the water, the mass of the water, and the heat of vaporization of water.
The heat of vaporization of water is 40.7 kJ/mol or 2.26 kJ/g.
To completely boil 500g of water that is at 15°C, we need to first heat the water to its boiling point (100°C), and then provide the energy required for the phase change from liquid to gas.
The amount of energy required to heat the water from 15°C to 100°C can be calculated using the specific heat capacity of water, which is 4.184 J/g°C:
Q1 = m * c * ΔT
Q1 = 500g * 4.184 J/g°C * (100°C - 15°C)
Q1 = 191,020 J
The amount of energy required for the phase change from liquid to gas can be calculated as follows:
Q2 = m * Hv
Q2 = 500g * 2.26 kJ/g
Q2 = 1,130 kJ
Therefore, the total amount of energy required to completely boil 500g of water that is at 15°C is:
Qtotal = Q1 + Q2
Qtotal = 191,020 J + 1,130 kJ
Qtotal = 1,321,020 J
So, it would require 1,321,020 joules of energy to completely boil 500g of water that is at 15°C.
To know more about energy refer here
https://brainly.com/question/1932868#
#SPJ11
Combustion of 13. 5 g of sample of an hydrocarbon yields 24. 41 g CO2 and 14. 49 g H2O. The molar mass of the compound is 246 g/mol. What are the empirical and molecular formulas?
1. Moles of CO₂ is 0.8047.
2. Moles of C is 1.6094.
3. C:H ratio is 1:3.
4. The Emperial formula is c6H6.
5. Emperical formula mass is 78g/mol.
1. Moles of CO₂ = 24.41 g / 44.01 g/mol = 0.5548 mol; Moles of H₂O = 14.49 g / 18.02 g/mol = 0.8047 mol
2. Moles of C = 0.5548 mol (1 C atom in CO₂); Moles of H = 0.8047 mol * 2 (2 H atoms in H₂O) = 1.6094 mol
3. C:H ratio = 0.5548:1.6094 ≈ 1:3 (divide by smallest value), but 1:2.89 is closer, which gives a ratio of 6:6 (multiply by 3 to get whole numbers)
4. Empirical formula: C₆H₆
5. Empirical formula mass: (6 * 12.01) + (6 * 1.01) = 78 g/mol. Molecular formula: (246 g/mol) / (78 g/mol) = 3; C₆H₆ * 3 = C₁₂H₁₂ (molecular formula)
To know more about Molecular formula click on below link:
https://brainly.com/question/14425592#
#SPJ11
Suppose you are a farmer trying to produce a high yield of corn to sell for the
manufacturing of ethanol, the main ingredient in flex fuels (e85). in order to produce
a large corn crop, you need to purchase a fertlizer that is high in nitrogen. given the
choice of two fertlizers, ammonium sulfate or ammonium phosphate, which one
would you choose to yield the largest amount of corn? explain your answer. hint:
determine the percent of nitrogen in each fertilizer.
Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.
To determine which fertilizer, ammonium sulfate or ammonium phosphate, would yield the largest amount of corn for ethanol production, you need to consider the nitrogen content in each fertilizer.
Ammonium sulfate has the chemical formula (NH4)2SO4. It contains 2 nitrogen atoms (N), 8 hydrogen atoms (H), 1 sulfur atom (S), and 4 oxygen atoms (O). The molar mass of nitrogen is 14 g/mol, so the nitrogen content in ammonium sulfate is:
2(N) = 2(14 g/mol) = 28 g/mol.
The molar mass of ammonium sulfate is 132.14 g/mol. To calculate the percent of nitrogen in ammonium sulfate, divide the nitrogen mass by the total molar mass and multiply by 100:
(28 g/mol) / (132.14 g/mol) × 100 = 21.2%.
Ammonium phosphate has the chemical formula (NH4)3PO4. It contains 3 nitrogen atoms, 12 hydrogen atoms, 1 phosphorus atom, and 4 oxygen atoms. The nitrogen content in ammonium phosphate is:
3(N) = 3(14 g/mol) = 42 g/mol.
The molar mass of ammonium phosphate is 149.09 g/mol. To calculate the percent of nitrogen in ammonium phosphate, divide the nitrogen mass by the total molar mass and multiply by 100:
(42 g/mol) / (149.09 g/mol) × 100 = 28.2%.
Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.
To know more about ethanol production refer here: https://brainly.com/question/31574140#
#SPJ11
Explique las diferentes definiciones de ácido y base. Presente un ejemplo de cada uno y las características
para su identificación
There are several definitions of acids and bases, and each definition provides a unique perspective on their properties and behaviors.
Arrhenius Definition:
According to the Arrhenius definition, an acid is a substance that dissociates in water to form hydrogen ions (H+), while a base is a substance that dissociates in water to form hydroxide ions (OH-).
For example, hydrochloric acid (HCl) dissociates in water to form H+ and Cl- ions:
HCl → H+ + Cl-
On the other hand, sodium hydroxide (NaOH) dissociates in water to form Na+ and OH- ions:
NaOH → Na+ + OH-
Characteristics for identification:
Acids typically have a sour taste and can cause a burning sensation on the skin. Bases have a bitter taste and can feel slippery to the touch. They also typically have a higher pH value (greater than 7) in aqueous solutions.
Bronsted-Lowry Definition:
According to the Bronsted-Lowry definition, an acid is a substance that donates a proton (H+) to another molecule or ion, while a base is a substance that accepts a proton (H+) from another molecule or ion.
In this reaction, acetic acid is the acid because it donates a proton, while water is the base because it accepts a proton.
Characteristics for identification:
Acids and bases in the Bronsted-Lowry sense are identified by the presence or absence of a hydrogen ion. An acid must contain a hydrogen ion that can be donated to a base, while a base must have an available lone pair of electrons to accept a hydrogen ion.
Lewis Definition:
According to the Lewis definition, an acid is a substance that accepts a pair of electrons, while a base is a substance that donates a pair of electrons.
In this reaction, boron trifluoride is the acid because it accepts a pair of electrons, while ammonia is the base because it donates a pair of electrons.
Characteristics for identification:
Acids and bases in the Lewis sense are identified by their electron-pair accepting or donating abilities. An acid must be able to accept a pair of electrons, while a base must be able to donate a pair of electrons.
Learn more about acid Visit: brainly.com/question/2927542
#SPJ4
Correct Question:
Explain the different definitions of acid and base. Give an example of each and the characteristics of your identification.
Item 2 Explain how crustal deformation builds landforms. When sediments are laid down over vast areas the forces involved create rock over a very long period of time. When two tectonic plates start to push into each other they can rise up and build mountains, or sink under and create deep valleys. When wind and rain slowly wear away rock, they leave behind new looking land forms. When two tectonic plates slide away from each other the inner liquid layer of the mantle comes to the surface as lava and creates new islands
When the force of tectonic plates pushing against each other become too strong the plates break and create faults.
What is tectonic plates?Tectonic plates are large, rigid pieces of the Earth's lithosphere that move relative to one another. The lithosphere is the rocky outer layer of the Earth that includes the crust and part of the upper mantle. Tectonic plates can vary in size from a few hundred to thousands of kilometers in diameter. They interact at their boundaries and are responsible for the formation and destruction of the Earth's surface features, such as mountains and ocean trenches. Movement of the plates helps explain the occurrence of earthquakes, volcanic eruptions, mountain building, and oceanic trench formation. In plate tectonics, the lithosphere is divided into seven major plates and several minor ones. The major plates include the African, Antarctic, Eurasian, Indo-Australian, North American, Pacific, and South American plates. The plates move at a rate of several centimeters per year in response to convection currents in the mantle.
When the force of tectonic plates pushing against each other become too strong the plates break and create faults. This can cause folding of the crust to create mountains or reverse faults can create deep valleys. Volcanoes are also involved in the formation of landforms as they create mountains, ridges and canals. Earthquakes can also cause landforms to form in areas that were previously flat.
To learn more about tectonic plates
https://brainly.com/question/2325633
#SPJ4
If i were to determine how many liters 26 grams of water is, what type of conversion would this be?
The type of conversion that would be required to determine how many liters 26 grams of water is would be a conversion from mass to volume. This is because grams are a unit of mass, while liters are a unit of volume. In order to make this conversion, it is necessary to know the density of water, which is approximately 1 gram per milliliter at room temperature and atmospheric pressure.
To convert 26 grams of water to liters, we need to divide the mass by the density. This gives us:
26 grams / 1 gram per milliliter = 26 milliliters
Since there are 1000 milliliters in a liter, we can further convert this to liters by dividing by 1000:
26 milliliters / 1000 = 0.026 liters
Therefore, 26 grams of water is equivalent to 0.026 liters of water.
In summary, to determine the volume of a given mass of water, we need to use the density of water as a conversion factor. This involves dividing the mass by the density to obtain the volume in milliliters, and then converting this to liters by dividing by 1000.
To know more about mass refer here
https://brainly.com/question/19694949#
#SPJ11
The Si unit of hurtz equals one wave passing a fixed point in one _____
The Si unit of Hertz (Hz) represents the frequency of a wave, which is defined as the number of complete cycles of a wave passing a fixed point per second.
In other words, one Hertz equals one wave passing a fixed point in one second. This unit is commonly used to measure the frequency of various types of waves, including sound waves, electromagnetic waves, and radio waves.
For example, if a sound wave has a frequency of 440 Hz, it means that the sound wave completes 440 cycles of compression and rarefaction (the peaks and troughs of the wave) per second. Similarly, if a radio wave has a frequency of 100 MHz (megahertz), it means that the wave completes 100 million cycles per second.
The Hertz unit was named after Heinrich Hertz, a German physicist who was the first to demonstrate the existence of electromagnetic waves. Hertz's experiments in the late 19th century paved the way for the development of modern radio, television, and other forms of wireless communication.
In summary, the Si unit of Hertz equals one wave passing a fixed point in one second, and it is a fundamental unit of measurement for the frequency of various types of waves.
To know more about frequency, visit:
https://brainly.com/question/5102661#
#SPJ11
9. What is the pH of a 0. 25 molar HBz (benzoic acid) solution. Ka HBz=6. 5 x10-5
The pH of a 0.25 molar HBz (benzoic acid) solution is approximately 2.61.
To calculate the pH of the solution, follow these steps:
1. Write the dissociation equation for benzoic acid: HBz ⇌ H⁺ + Bz⁻.
2. Set up an ICE table (Initial, Change, Equilibrium) to determine the equilibrium concentrations of the species involved.
3. Write the expression for Ka: Ka = [H⁺][Bz⁻]/[HBz].
4. Substitute the equilibrium concentrations into the Ka expression and solve for x, representing the [H⁺] concentration.
5. Calculate the pH using the formula: pH = -log[H⁺].
Initial concentrations are [HBz] = 0.25 M, [H⁺] = 0 M, and [Bz⁻] = 0 M. The change in concentration is -x for HBz, +x for H⁺, and +x for Bz⁻. Thus, at equilibrium, [HBz] = 0.25 - x, [H⁺] = x, and [Bz⁻] = x. The Ka expression becomes (6.5 × 10⁻⁵) = x²/(0.25 - x). After solving for x, we find x ≈ 0.00256 M. Finally, pH = -log(0.00256) ≈ 2.61.
To know more about ICE table click on below link:
https://brainly.com/question/30395953#
#SPJ11
Write a conversation between you and your friend about a job agency and it's reliability.
When discussing a job agency and its reliability, a conversation between friends may touch on several aspects of the agency's services. They might consider the agency's reputation within the industry, the quality of the jobs the agency offers, and the level of support they provide to job seekers.
The agency's reputation, screening process, communication, and track record, the conversation might also touch on other factors that can affect an agency's reliability. These may include the types of industries and job roles the agency specializes in, the geographic region it serves and the fees it charges for its services.
If the agency primarily focuses on entry-level jobs or temporary positions, it may not be the best fit for job seekers looking for long-term career growth. If the agency only operates in a specific region or industry, it may not be able to offer the same level of job opportunities as larger agencies with a broader reach.
To learn more about agency follow the link:
https://brainly.com/question/15129864
#SPJ4
What set of coefficients will balance the chemical equation below:
___FeCl3 (aq) + ___AgNO3 (aq) ___Fe(NO3)3 (aq) + ___AgCl (aq)
A. 1,2,2,1
B. 1,1,1,1
C. 1,3,1,3
D. 1,1,1,3
The set of coefficients that will balance the chemical equation is: C)1, 3, 1, 3
What is a reaction?In chemistry, reaction is a process that leads to the changing of one or more substances into one or more different substances.
Coefficients in front of each reactant and product indicate the relative number of moles of each substance that participate in the reaction.
Looking at the equation, we can see that there are three chloride ions on the left-hand side and three chloride ions on right-hand side. Therefore, coefficient of AgCl should be 3. There are three nitrate ions on the right-hand side, so the coefficient of Fe(NO₃)₃ should be 1.
The balanced chemical equation is: FeCl₃ (aq) + 3 AgNO₃ (aq) → Fe(NO₃)₃ (aq) + 3 AgCl (s)
Therefore, the set of coefficients that will balance the chemical equation is: C)1, 3, 1, 3
To know more about reaction, refer
https://brainly.com/question/25769000
#SPJ1
Polonium crystallizes in the simple cubic lattice. What is the coordination number for po?.
Polonium is a rare and radioactive element that belongs to the group of chalcogens. The coordination number of polonium in a simple cubic lattice is 8.
It is known to crystallize in the simple cubic lattice structure, which is one of the three basic types of crystal lattice structures. In this structure, each polonium atom is located at the corner of a cube, sharing its electrons equally with its neighboring atoms.
The coordination number of an atom in a crystal lattice is the number of nearest neighbor atoms to which it is bonded. In the case of polonium, since each atom is located at the corner of a cube, it is in contact with eight other atoms, which are located at the corners of the adjacent cubes.
The knowledge of the crystal structure and coordination number of polonium is important for understanding its physical and chemical properties, and can also have implications in the fields of materials science, nuclear physics, and medical applications.
To know more about Polonium refer to-
https://brainly.com/question/555482
#SPJ11
Atoms, Elements and Compounds. The worksheet is from Beyond Science. I Need help for question 4 please!
Answer:
Carbon dioxide:
One carbon circle with 2 oxygen circles connected to it.
Ammonia:
One nitrogen circles with 3 hydrogen circles connected to it.
Oxygen:
2 oxygen circles connected to each other.
Hydrogen:
2 hydrogen circles stuck together
Which two processes of dead bodies can help forensic investigators determine the time of death?
When a forensic Investigator determines the time of death, he or she has two primary clues from the corpse.
body stiffens after death and goes through predictable stages beginning two hours after death.
causes the blood to flow downward and bluish-purple blotches appear due to the lack of oxygen.
is when a
Is when gravity
A forensic investigator relies on rigor mortis and livor mortis to determine the time of death, which respectively refers to the body stiffening and going through predictable stages and bluish-purple blotches appearing due to gravity causing the blood to flow downward after death.
A forensic investigator relies on two primary clues from a corpse to determine the time of death: rigor mortis and livor mortis. Rigor mortis refers to the process where the body stiffens after death, going through predictable stages that typically begin around two hours post-mortem. This occurs due to the lack of ATP in muscles, causing them to contract and become rigid. The stiffness progresses and peaks around 12 hours after death, then gradually subsides within the next 24-48 hours.
Livor mortis, on the other hand, is caused by gravity influencing the blood flow in the body after death. As the blood stops circulating, it flows downward and accumulates in the dependent areas, resulting in bluish-purple blotches appearing on the skin due to the lack of oxygen. This process usually starts around 30 minutes to 2 hours after death and becomes more pronounced within 6-12 hours.
By observing the extent and progression of rigor mortis and livor mortis, a forensic investigator can estimate the time of death, aiding in the investigation process.
Know more about rigor mortis here:
https://brainly.com/question/29194734
#SPJ11
Questlon 25 of 25
henry lifted a box that weighed 500 n to a height of 0.75 meters. it took him
1.5 seconds. how much work did henry do?
o a. 667 j
b. 750 j
c. 500 j
d. 375 j
The work done by Henry can be calculated by multiplying the weight of the box (500 N) with the distance it was lifted (0.75 m). Thus, the work done is 375 J (Joules).(D)
In physics, work is defined as the energy transferred when a force is applied to move an object through a distance. The unit of work is Joule, which is the same as Newton-meter. In this question, Henry lifted the box with a force equal to its weight, and the box was lifted through a distance of 0.75 m.
Therefore, Henry did work on the box by transferring 375 J of energy to it. This work is equal to the potential energy gained by the box due to its vertical displacement. The time taken (1.5 seconds) is not relevant to the calculation of work.
To know more about potential energy click on below link:
https://brainly.com/question/24284560#
#SPJ11
Someone help me please
Answer: C
Explanation: When distinguishing between opinion and fact, it's important to pick out certain words or phrases.
EX 1: Apple's are healthy, but you shouldn't eat too many of them. Fact
EX 2: I don't think you should eat that banana, they don't taste good to me. Opinion
Try to say the sentence in your head as if you were talking to another person, and try to determine your answer that way.
A solution contains 55 grams of potassium iodide, KI, dissolved in 100 grams of water at 15 °C. How many more grams of KI would have to be added to make it a saturated solution?
In order to respond to this query, it is necessary to first define a saturated solution. When a solution reaches its maximal solubility, no more solute can dissolve in the solvent, creating a saturated solution.
Potassium iodide is the solute in this scenario, while water is the solvent. Potassium iodide is most soluble in water at a temperature of around 74.2 grammes per 100 grammes of water.
We must thus add 19.2 additional grammes of KI to the solution in order to make it saturated. This implies that there would be 74.2 grammes of KI in the entire solution.
Learn more about KI at:
https://brainly.com/question/30033275
#SPJ1
When calcium metal reacts with chlorine gas a new compound is formed. Which is the correct formula for that compound?.
When calcium metal reacts with chlorine gas, they form an ionic compound known as calcium chloride. The chemical formula for calcium chloride is [tex]CaCl2[/tex].
During the reaction, calcium metal loses two electrons to form [tex]Ca2+[/tex] ions while chlorine gas accepts these electrons to form [tex]Cl-[/tex] ions.
The electrostatic attraction between the positively charged [tex]Ca2+[/tex] ions and negatively charged [tex]Cl-[/tex] ions results in the formation of the solid ionic compound, calcium chloride.
Calcium chloride is a white crystalline solid that is highly soluble in water. It has a wide range of applications in industries such as food, pharmaceuticals, and de-icing of roads.
Additionally, it is used as a drying agent in laboratory procedures and as a source of calcium ions in biological and medical applications.
To know more about calcium chloride refer to-
https://brainly.com/question/664620
#SPJ11
Help pls! Assuming non-ideal behavior, a 2. 0 mol sample of CO₂ in a 7. 30 L container at 200. 0 K has a pressure of 4. 50 atm. If a = 3. 59 L²･atm/mol² and b = 0. 0427 L/mol for CO₂, according to the van der Waals equation what is the difference in pressure (in atm) between ideal and nonideal conditions for CO₂?
The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.
To find the difference in pressure between ideal and non-ideal conditions for CO₂ using the van der Waals equation, follow these steps:
1. First, recall the van der Waals equation: (P + a(n/V)²)(V - nb) = nRT, where P is pressure, n is the number of moles, V is volume, T is temperature, a and b are van der Waals constants, and R is the ideal gas constant (0.0821 L･atm/mol･K).
2. Given values: n = 2.0 mol, V = 7.30 L, T = 200.0 K, a = 3.59 L²･atm/mol², b = 0.0427 L/mol, and P_vdW = 4.50 atm (non-ideal pressure).
3. Calculate the ideal pressure (P_ideal) using the ideal gas law, PV = nRT:
P_ideal = nRT/V = (2.0 mol)(0.0821 L･atm/mol･K)(200.0 K) / 7.30 L = 4.49 atm.
4. Find the difference in pressure between ideal and non-ideal conditions:
ΔP = P_vdW - P_ideal = 4.50 atm - 4.49 atm = 0.01 atm.
The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.
To know more about van der Waals equation :
https://brainly.com/question/31585867
#SPJ11
A cylinder of Krypton has contains 17 L of Ar at 22. 8 atm and 112 degrees celsisus. How many moles are in the cylinder?
The number of moles in a cylinder of Krypton can be calculated using the Ideal Gas Law, which states that the product of pressure, volume, and temperature divided by the gas constant should be equal to the number of moles of gas in the container.
Using the given values, we find that the number of moles in the cylinder is 1.61 moles. To calculate this, first convert the temperature to Kelvin (K) by adding 273.15 to the temperature in Celsius, giving us 385.95 K.
Then, the ideal gas law equation becomes (22.8 atm * 17 L) / (8.314 J/K*mol * 385.95 K) = 1.61 moles. Thus, the cylinder contains 1.61 moles of Ar.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
.
calculate the osmolarity of the following solutions, are these solutions hypotonic solution, isotonic solution, or hypertonic solution?
(a) osmolarity of 0.069 m na2co3 is ___, this solution is a ___ solution (hypotonic
hypertonic, or isotonic)
(b) osmolarity of 0.62 m ai(no3)3 is ___, this solution is a ___ solution
this solution is a
(c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is ___, this solution is a ___ solution
(a) Osmolarity of 0.069 m na2co3 is 0.138 m, (b) osmolarity of 0.62 m ai(no3)3 is 1.86 m, (c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is 0.30 m.
What is Osmolarity ?Osmolarity is a measure of the concentration of solutes in a solution. It is expressed as the number of osmoles (molecules or particles) of solutes per litre of solution. Osmolarity is an important factor in the body's ability to regulate the balance of water and electrolytes in the blood and other bodily fluids. It is also important for the absorption of nutrients from the intestines, and the maintenance of blood pressure. Osmolarity is measured using a special instrument called an osmometer.
To learn more about Osmolarity
https://brainly.com/question/14814464
#SPJ4
Use the VSEPR Theory to predict the molecular geometry of the following molecules:
(Remember, you may need to draw the lewis structure before making a prediction. )
HI
CBr4
CH2Cl2
SF2
PCl3
To predict the molecular geometry of these molecules using the VSEPR theory, we first need to draw the Lewis structure for each molecule:
1. HI
Lewis structure: H-I (single bond)
The central atom (Iodine) has 7 valence electrons, and each hydrogen atom contributes 1 valence electron. Therefore, the total valence electrons in the molecule is 9.
Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 1 = 1
Molecular geometry: linear
2. CBr4
Lewis structure:
:Br-C-Br:
: | :
:Br-C-Br:
The central atom (Carbon) has 4 valence electrons, and each Bromine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 32.
Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 4 = 4
Molecular geometry: tetrahedral
3. CH2Cl2
Lewis structure:
H : Cl
| :
H-C-H
| :
Cl:
The central atom (Carbon) has 4 valence electrons, each hydrogen atom contributes 1 valence electron, and each chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.
Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 2 + 4 = 6
Molecular geometry: octahedral
However, the two lone pairs of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.
4. SF2
Lewis structure:
F : S : F
\ /
F
The central atom (Sulfur) has 6 valence electrons, each Fluorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.
Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 1 + 2 = 3
Molecular geometry: trigonal planar
However, the lone pair of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.
5. PCl3
Lewis structure:
Cl : P : Cl
:
Cl
The central atom (Phosphorus) has 5 valence electrons, each Chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 26.
Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 3 = 3
Molecular geometry: trigonal planar
To know more about VSEPR theory refer to-
https://brainly.com/question/14992767
#SPJ11
What volume (in litres) of 0. 200 M NaOH is required to neutralize 22. 3 mL of 0. 152 M HCl?
To solve this problem, we can use the following equation:
Moles of acid = Moles of base
where "acid" refers to the HCl and "base" refers to the NaOH.
First, let's calculate the moles of HCl:
moles of HCl = concentration of HCl × volume of HCl
= 0.152 mol/L × 0.0223 L
= 0.0033856 mol
Next, let's calculate the volume of NaOH required to neutralize the HCl:
moles of NaOH = moles of HCl
volume of NaOH = moles of NaOH / concentration of NaOH
We know the concentration of NaOH (0.200 M), so let's substitute in the values:
moles of NaOH = 0.0033856 mol
volume of NaOH = 0.0033856 mol / 0.200 mol/L
= 0.016928 L
= 16.928 mL (rounded to three decimal places)
Therefore, 16.928 mL of 0.200 M NaOH is required to neutralize 22.3 mL of 0.152 M HCl.
To know more about problem refer here
https://brainly.com/question/31611375#
#SPJ11
What physical property and reaction type are used by extraction as useful techniques to separate and purify mixtures of compounds?.
Extraction is a useful technique for separating and purifying mixtures of compounds based on differences in their physical properties and reaction types.
The physical property used in extraction is the solubility of a compound in a particular solvent. If a compound is more soluble in one solvent than another, it can be selectively extracted and separated from the mixture.
For example, if a mixture contains both water-soluble and oil-soluble compounds, the mixture can be extracted with water to separate the water-soluble compounds, and then extracted with an organic solvent to separate the oil-soluble compounds.
The reaction type used in extraction is often acid-base chemistry. If a mixture contains both acidic and basic compounds, they can be selectively extracted by adjusting the pH of the solvent.
For example, if a mixture contains both an acidic carboxylic acid and a basic amine, the mixture can be extracted with a basic solvent to selectively extract the amine, and then extracted with an acidic solvent to selectively extract the carboxylic acid.
Overall, extraction is a powerful technique for separating and purifying mixtures of compounds, and its effectiveness depends on the physical properties and reaction types of the compounds in the mixture.
To know more about Extraction refer to-
https://brainly.com/question/16848369
#SPJ11
An unmanned spacecraft sent from Earth to explore objects in space
An unmanned spacecraft is a type of spacecraft that is designed and programmed to operate without human crew on board.
These spacecraft are sent from Earth to explore various objects in space, such as planets, moons, asteroids, comets, and other celestial bodies. They are used to gather scientific data, images, and other important information that can help us learn more about the universe.
The unmanned spacecraft is equipped with a variety of instruments and sensors that allow it to study the object it is exploring. These instruments can include cameras, spectrometers, radar systems, and other scientific instruments. The spacecraft is controlled remotely from Earth, and the data it collects is transmitted back to Earth for analysis.
One of the main advantages of using unmanned spacecraft is that they can operate in environments that are too dangerous or inhospitable for humans. For example, unmanned spacecraft can explore the harsh and extreme environments of other planets or moons, where humans cannot survive.
Additionally, unmanned spacecraft are often less expensive to launch and operate than crewed missions, making them a more cost-effective option for space exploration.
In summary, unmanned spacecraft are an essential tool for exploring the vast expanse of space. They allow us to gather important data and information about our universe, and they are a key component of modern space exploration.
To know more about spacecraft, visit:
https://brainly.com/question/13478702#
#SPJ11
Which of the following compounds is most soluble in pentane C5H12:C5H12:
A. Pentanol (CH3CH2CH2CH2CH2OH)(CH3CH2CH2CH2CH2OH)
B. Benzene (C6H6)(C6H6)
C. Acetic Acid (CH3CO2H)(CH3CO2H)
D. Ethyl Methyl Ketone (CH3CH2COCH3)(CH3CH2COCH3)
E. None of these compounds should be soluble in pentane.
E. None of these compounds should be soluble in pentane. Pentane is a nonpolar solvent, meaning it will dissolve other nonpolar molecules, but not polar or ionic molecules.
Acetic acid is polar, while pentanol and ethyl methyl ketone have polar functional groups. Benzene is nonpolar, but larger than pentane, so it is unlikely to dissolve well in it.
Acetic acid is a colorless liquid organic compound with the chemical formula CH3COOH. It is also known as ethanoic acid and is a weak acid. It is a pungent-smelling liquid that is commonly used as a solvent, as a food preservative, and in the manufacture of various chemicals. Acetic acid is the main component of vinegar, and it is also used as a reagent in laboratory experiments. In the body, acetic acid is produced during the metabolism of carbohydrates and fats.
Visit here to learn more about pentane brainly.com/question/1550379
#SPJ11
You chop out a 500 g sample of ice out of the red river when it –40°c outside, then you
bring the ice sample indoors where it melts and heats up to 25°c. assuming that red
river ice is composed of pure water, what is the total energy is absorbed by the ice
sample?
water data
density of water 1.00 g/ml
heat capacity of ice: 2.09 j g–1 k–1
heat capacity of liquid water: 4.18 j g–1 k–1
heat capacity of water vapour: 2.01 j g–1 k–1
enthalpy of fusion: 6.02 kj mol–1
enthalpy of vapourization: 40.7 kj mol–1
melting point (1 bar): 273 k
boiling point (1 bar): 373 k
The total energy absorbed by a 500 g sample of red river ice when it is brought indoors and melted from -40°C to 25°C is 218,250 joules. This includes the energy required to raise the temperature of the ice, melt the ice, and raise the temperature of the resulting liquid water.
To calculate the total energy absorbed by the ice sample, we need to consider the different processes involved in the transition from ice at -40°C to liquid water at 25°C.
First, we need to calculate the energy required to raise the temperature of the ice from -40°C to 0°C:
Q1 = m × cice × ΔT1
Q1 = 500 g × 2.09 J/gK × (0°C - (-40°C))
Q1 = 41800 J
Next, we need to calculate the energy required to melt the ice at 0°C:
Q2 = m × ΔHfusion
Q2 = 500 g × 6.02 kJ/mol ÷ 18.02 g/mol
Q2 = 166 kJ
Then, we need to calculate the energy required to raise the temperature of the water from 0°C to 25°C:
Q3 = m × cwater × ΔT2
Q3 = 500 g × 4.18 J/gK × (25°C - 0°C)
Q3 = 10450 J
Finally, we add up the three energy values to get the total energy absorbed by the ice sample:
Qtotal = Q1 + Q2 + Q3
Qtotal = 41800 J + 166000 J + 10450 J
Qtotal = 218250 J
Therefore, the total energy absorbed by the ice sample is 218250 joules (J).
To know more about the total energy refer here :
https://brainly.com/question/3551742#
#SPJ11
26. Over time an open soft drink will lose carbonation (dissolved CO2
Which of these allows the CO2 to remain in solution the longest?
O Reduced air pressure
Exposure to direct sunlight
Increased air currents
O Cooler temperatures
Out of the options provided, cooler temperatures allow CO2 to remain in solution the longest.
When a soft drink is opened, CO2 molecules start to escape from the solution and accumulate in the headspace of the container. Higher temperatures increase the kinetic energy of the CO2 molecules, causing them to move faster and escape the solution more quickly. In contrast, cooler temperatures reduce the kinetic energy of the CO2 molecules, slowing down their movement and allowing them to remain in solution for a longer period of time.
Reduced air pressure, exposure to direct sunlight, and increased air currents can all further accelerate the loss of carbonation in an open soft drink. Reduced air pressure lowers the atmospheric pressure, which decreases the solubility of CO2 in the liquid. Exposure to direct sunlight increases the temperature of the drink and causes the CO2 molecules to escape more quickly. Increased air currents can also cause CO2 to escape more quickly by creating turbulence in the liquid.
Therefore, to keep a soft drink fizzy for longer, it is best to store it in a cool place and avoid exposing it to direct sunlight, reducing air pressure or increased air currents.
Know more about Kinetic Energy here:
https://brainly.com/question/26472013
#SPJ11
explain how polarity affects surface tension?
If a piece of cadmium with mass 65.6 g at a temperature of 100.0°C is dropped into 25.0 g of water at 23.0°C the final temperature is 32.7°C. What is the specific heat capacity of cadmium?
To calculate the specific heat capacity of cadmium, we can use the formula:
Q = mcΔT, Where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. Since the heat gained by the water equals the heat lost by the cadmium, we can set up the following equation:
mc_cadmium (Tfinal - Tinitial_cadmium) = mc_water (Tfinal - Tinitial_water).
Given:
m_cadmium = 65.6 g
Tinitial_cadmium = 100.0°C
m_water = 25.0 g
Tinitial_water = 23.0°C
Tfinal = 32.7°C
c_water = 4.18 J/g°C (specific heat capacity of water)
Now we can solve for c_cadmium:
65.6 * c_cadmium * (32.7 - 100.0) = 25.0 * 4.18 * (32.7 - 23.0)
Solving for c_cadmium:
c_cadmium = (25.0 * 4.18 * (32.7 - 23.0)) / (65.6 * (32.7 - 100.0))
c_cadmium ≈ 0.227 J/g°C
So the specific heat capacity of cadmium is approximately 0.227 J/g°C.
For more questions on: heat
https://brainly.com/question/30738335
#SPJ11
Select the statement that reflects a central theme of the atomists.
a. atomists would agree that a butterfly and a caterpillar are one in the same since a caterpillar becomes a butterfly.
b. atomists would agree that epistemology provides a defensible explanation of why a butterfly differs from a caterpillar.
c. atomists would agree that during metamorphosis, a caterpillar ceases to exist and a butterfly is spontaneously created in its place.
d. atomists would agree that a butterfly and a caterpillar exist as a collection of atoms, but their atoms are organized differently
The statement that reflects a central theme of the atomists is: Atomists would agree that a butterfly and a caterpillar exist as a collection of atoms, but their atoms are organized differently.
Atomists believe that everything in the universe is composed of small, indivisible particles called atoms. They assert that the properties of objects, like a butterfly and a caterpillar, are determined by the arrangement and organization of these atoms.
While a butterfly and a caterpillar may share similar atoms, their unique characteristics are due to the differences in how these atoms are arranged within each organism.
This perspective acknowledges the transformation from a caterpillar to a butterfly as a process of reorganization of atoms, rather than the creation or destruction of matter.
To know more about Atomists click on below link:
https://brainly.com/question/5397458#
#SPJ11