The intensity of light after the first polarizer is still 50 W/m². The intensity of light through the second polarizer is 25 W/m². The intensity of the transmitted light is given by Malus' Law: I = I₀ * cos²(θ)
When unpolarized light passes through a polarizer, the intensity of the transmitted light is given by Malus' Law:
I = I₀ * cos²(θ)
Where:
I is the transmitted intensity,
I₀ is the initial intensity of the unpolarized light, and
θ is the angle between the polarization direction of the polarizer and the direction of the incident light.
In this case, the intensity of the incident light is given as 50 W/m².
(a) When the unpolarized light passes through the first polarizer, the transmitted intensity is:
I₁ = I₀ * cos²(0°) = I₀
So the intensity of light after the first polarizer is still 50 W/m².
(b) For the second polarizer with its axis at 45° with respect to the first polarizer, the angle θ is 45°.
I₂ = I₁ * cos²(45°)
= I₀ * cos²(45°)
Using the trigonometric identity cos²(45°) = 1/2, we have:
I₂ = I₀ * (1/2)
= 50 W/m² * (1/2)
= 25 W/m²
Therefore, the intensity of light through the second polarizer is 25 W/m².
To learn more about Malus' Law click here
https://brainly.com/question/15554133
#SPJ11
When waves cancel each other out it is called _________________
interfernce.
When waves cancel each other out, it is called
destructive interference
. Destructive interference occurs when waves combine to produce a wave with a smaller amplitude than the original waves.
A wave is the disturbance that travels through a medium by transmitting energy and not transmitting matter.
Waves can be divided into two categories:
transverse and longitudinal waves
. In a transverse wave, the medium's particles move perpendicular to the direction of wave propagation, while in a longitudinal wave, the medium's particles move parallel to the wave's propagation direction.
In waves, interference is a
phenomenon
that occurs when two or more waves collide, combining to produce a single wave. Constructive interference occurs when the crest of one wave aligns with the crest of another wave, producing a larger wave. Destructive interference occurs when the crest of one wave aligns with the trough of another wave, resulting in a smaller wave.
to know more about
destructive interference
pls visit-
https://brainly.com/question/31857527
#SPJ11
S John is pushing his daughter Rachel in a wheelbarrow when it is stopped by a brick of height h (Fig. P12.21). The handles make an angle of \theta with the ground. Due to the weight of Rachel and the wheelbarrow, a downward force m g is exerted at the center of the wheel, which has a radius R. (b) What are the components of the force that the brick exerts on the wheel just as the wheel begins to lift over the brick? In both parts, assume the brick remains fixed and does not slide along the ground. Also assume the force applied by John is directed exactly toward the center of the wheel.
The components of the force that the brick exerts on the wheel just as the wheel begins to lift over the brick are a normal force (N) and a horizontal force (F).
The normal force acts perpendicular to the surface of the brick and supports the weight of the wheel and Rachel. The horizontal force acts in the direction opposite to the motion of the wheelbarrow.
The magnitude of the normal force can be calculated as N = mg, where m is the mass of the wheelbarrow and Rachel, and g is the acceleration due to gravity.
The magnitude of the horizontal force can be calculated as F = mg tan(θ), where θ is the angle made by the handles with the ground.
These two forces together provide the necessary support and resistance for the wheelbarrow to lift over the brick.
To learn more about force, Click here: brainly.com/question/30507236?
#SPJ11
Question
part 1:
When a photoelectric surface is illuminated with light of wavelength 400 nm, the stopping potential is 2.50 V. (a) Calculate the work function of the metal. (b) What is the maximum speed of the ejected electrons?
part 2:
The sun’s surface is an example of a blackbody with a surface temperature of 5800 K. (a) At what wavelength does the sun emit most strongly? (b) What is the total radiated power per unit surface area?
In the given scenario, when a photoelectric surface is exposed to light with a wavelength of 400 nm, the work function of the metal can be calculated as 2.48 eV. The maximum speed of the ejected electrons can be determined using the kinetic energy equation.
The work function (Φ) of a metal is the minimum energy required to remove an electron from its surface. In the photoelectric effect, the stopping potential (V_stop) is the voltage needed to prevent electrons from reaching a collector plate.
The work function can be calculated using the formula Φ = eV_stop, where e is the elementary charge (1.6 x 10^-19 C). Substituting the given stopping potential of 2.50 V, we find Φ = 4.00 x 10^-19 J (or 2.48 eV).
To determine the maximum speed of the ejected electrons, we can use the equation for kinetic energy (KE) in the photoelectric effect: KE = hf - Φ, where h is Planck's constant (6.63 x 10^-34 J*s) and f is the frequency of the incident light. Since the wavelength (λ) and frequency (f) are related by the speed of light (c = λf).
we can convert the given wavelength of 400 nm to frequency and substitute it into the equation. Solving for KE and using the equation KE = (1/2)mv^2, where m is the mass of the electron, we can determine the maximum speed of the ejected electrons.
Learn more about photoelectric surface click here: brainly.com/question/31852302
#SPJ11
Two objects moving with a speed vv travel in opposite directions in a straight line. The objects stick together when they collide, and move with a speed of v/6v/6 after the collision.
1) What is the ratio of the final kinetic energy of the system to the initial kinetic energy? 2)What is the ratio of the mass of the more massive object to the mass of the less massive object?
Let m1 and m2 be the masses of the two objects moving with speed v in opposite directions in a straight line. The total initial kinetic energy of the system is given byKinitial = 1/2 m1v² + 1/2 m2v²Kfinal = 1/2(m1 + m2)(v/6)²Kfinal = 1/2(m1 + m2)(v²/36)
The ratio of the final kinetic energy to the initial kinetic energy is:Kfinal/Kinitial = 1/2(m1 + m2)(v²/36) / 1/2 m1v² + 1/2 m2v²We can simplify by dividing the top and bottom of the fraction by 1/2 v²Kfinal/Kinitial = (1/2)(m1 + m2)/m1 + m2/1 × (1/6)²Kfinal/Kinitial = (1/2)(1/36)Kfinal/Kinitial = 1/72The ratio of the final kinetic energy of the system to the initial kinetic energy is 1/72.The momentum before the collision is given by: momentum = m1v - m2vAfter the collision, the velocity of the objects is v/6, so the momentum is:(m1 + m2)(v/6)Since momentum is conserved,
we have:m1v - m2v = (m1 + m2)(v/6)m1 - m2 = m1 + m2/6m1 - m1/6 = m2/6m1 = 6m2The ratio of the mass of the more massive object to the mass of the less massive object is 6:1.
To know more about speed visit:
https://brainly.com/question/17661499
#SPJ11
Please include units and thanks for your help!3 : A grandfather clock with a simple pendulum has a period of 1.8 seconds on Earth ( = 9.8 m/2). What would be its period on Pluto ( = 0.62 m/2)?
4. The Moon has a mass of 7.342 × 1022 kg and an average radius of 1,737.4 km.
A: What is the acceleration due to gravity on the surface of the Moon?
B: The lunar excursion modules (LEMs) used during the Apollo program had a mass of roughly 15,200 kg. During the Apollo 11 mission, the LEM accelerated from about 7 m/s to about 0.762 m/s over the course of roughly one minute. What was the net force acting on the LEM?
C: How much force was the LEM’s engine exerting?
D: How much work was done on the LEM?
3.) The period of a pendulum can be calculated using the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
On Earth, the period is given as 1.8 seconds, and the acceleration due to gravity is 9.8 m/s^2. To find the period on Pluto, where the acceleration due to gravity is 0.62 m/s^2, we can rearrange the formula and solve for T_pluto:
T = 2π√(L/g)
T_pluto = 2π√(L/0.62)
4.) A) The acceleration due to gravity on the surface of the Moon can be calculated using the formula g = G(M/R^2), where G is the gravitational constant (6.67430 × 10^-11 N m^2/kg^2), M is the mass of the Moon (7.342 × 10^22 kg), and R is the radius of the Moon (1,737.4 km converted to meters by multiplying by 1000). By substituting these values into the formula, we can calculate the acceleration due to gravity on the Moon's surface.
B) The net force acting on the LEM can be found using Newton's second law, F = ma. Given the mass of the LEM (15,200 kg) and the change in velocity (from 7 m/s to 0.762 m/s) over a time period of one minute (60 seconds), we can calculate the net force.
C) The force exerted by the LEM's engine can be determined using Newton's second law, F = ma. By knowing the mass of the LEM (15,200 kg) and the acceleration experienced during the change in velocity, we can calculate the force exerted by the engine.
D) The work done on the LEM can be calculated using the formula W = Fd, where W is the work, F is the force applied, and d is the displacement. By multiplying the average velocity (the average of the initial and final velocities) by the time taken (60 seconds), we can determine the displacement and calculate the work done on the LEM.
Learn more about gravity here:
brainly.com/question/31321801
#SPJ11
You have a simple RC circuit, with resistance, 6.9kΩ, and capacitance 1.3μF. What is the time constant of the circuit?
The time constant of the RC circuit is approximately 8.97 milliseconds.
The time constant of an RC circuit is determined by the product of the resistance and the capacitance.
Here's a step-by-step explanation to find the time constant:
Given data:
Resistance (R) = 6.9 kΩ = 6.9 * 10^3 Ω
Capacitance (C) = 1.3 μF = 1.3 * 10^(-6) F
Calculate the time constant:
The time constant (τ) is given by the formula τ = RC, where R is the resistance and C is the capacitance.
τ = (6.9 * 10^3 Ω) * (1.3 * 10^(-6) F) = 8.97 ms (rounded to two decimal places)
Therefore, the time constant of the RC circuit is approximately 8.97 milliseconds.
The time constant represents the time it takes for the voltage across the capacitor to reach approximately 63.2% of its final value in an RC circuit when it is charging or discharging.
It is an important parameter for understanding the time behavior of the circuit, such as the charging and discharging processes.
Learn more about time constant from the given link,
https://brainly.com/question/28045311
#SPJ11
What do you understand by quantum tunnelling? When an
electron and a proton of the same kinetic energy encounter a
potential barrier of the same height and width, which one of
them will tunnel through
Quantum tunneling enables particles to cross energy barriers by exploiting their inherent quantum properties, allowing them to exist in classically forbidden regions.
Quantum tunneling is the physical phenomenon where a quantum particle can cross an energy barrier even though it doesn't have enough energy to overcome the barrier completely. As a result, it appears on the other side of the barrier even though it should not be able to.
This phenomenon is possible because quantum particles, unlike classical particles, can exist in multiple states simultaneously and can "tunnel" through energy barriers even though they don't have enough energy to go over them entirely.
Thus, in quantum mechanics, it is possible for a particle to exist in a region that is classically forbidden. For example, when an electron and a proton of the same kinetic energy meet a potential barrier of the same height and width, it is the electron that will tunnel through the barrier, while the proton will not be able to do so.
To learn more about Quantum tunneling
https://brainly.com/question/29707109
#SPJ11
2. DETAILS OSCOLPHYS2016 17.3.P.013. The warning tag on a lawn mower states that it produces noise at a level of 88.0 dB. What is this in W/m2; W/m2
the lawn mower produces a sound intensity level of approximately 3.98 x 10^(-6) W/m².
Sound intensity is the amount of energy transmitted through a unit area perpendicular to the direction of sound propagation. The sound intensity level (SIL) is a logarithmic representation of the sound intensity, measured in decibels (dB). To convert the given decibel level to sound intensity in watts per square meter (W/m²), we need to use the formula:SIL = 10 * log₁₀(I / I₀),where SIL is the sound intensity level, I is the sound intensity, and I₀ is the reference sound intensity level (typically set at 10^(-12) W/m²).
Rearranging the formula, we have:
I = I₀ * 10^(SIL / 10).Substituting the given SIL of 88.0 dB into the formula, we get:I = (10^(-12) W/m²) * 10^(88.0 dB / 10) = (10^(-12) W/m²) * 10^(8.8) ≈ 3.98 x 10^(-6) W/m².Therefore, the lawn mower produces a sound intensity level of approximately 3.98 x 10^(-6) W/m².
Learn more about sound intensity here
https://brainly.com/question/32194259
#SPJ11
8. In the rope climb, an athlete (weight −875.6 N ) climbs a vertical distance of 6.8 m in 11 s. What minimum power ( in hp ) was used to accomplish this feat ? Hint: Fg=mg; Ihp-746 W; P=W/t;W=mgh;g=9.8 m/s2 a) 0.90 b) 0.52 c)1.2 d) 0.72 c) None of these is true
Using the formula P = W/t, where W is the work done and t is the time taken, we can substitute the values and calculate the power. Converting the power from watts to horsepower (1 hp = 746 W), we find that the minimum power used is 0.90 hp.
To calculate the power used to climb the rope, we need to determine the work done and the time taken. The work done can be calculated using the formula W = mgh, where m is the mass, g is the acceleration due to gravity, and h is the vertical distance climbed.
Given the weight of the athlete (−875.6 N), we can calculate the mass by dividing the weight by the acceleration due to gravity (9.8 m/s^2). The mass is approximately -89.3 kg.
Substituting the values into the work formula, we have:
W = (−89.3 kg) × (9.8 m/s^2) × (6.8 m)
W ≈ -5414.776 J
Next, we divide the work done by the time taken to obtain the power:
P = W / t
P = -5414.776 J / 11 s
P ≈ -492.252 W
To convert the power from watts to horsepower, we divide by 746:
P_hp = -492.252 W / 746
P_hp ≈ -0.66 hp
Since power cannot be negative in this context, we take the absolute value:
P_hp ≈ 0.66 hp
Therefore, the minimum power used to climb the rope is approximately 0.66 hp.
To learn more about work click here brainly.com/question/19382352
#SPJ11
A particle of mass m is at level nx = 1, ny = 1 while it is trapped in a two-dimensional infinite potential well given by: 0 < x, y < L U (x, y) = { [infinity] otherwise What is the probability to find the particle in the area defined by L/2 < x <3L/4 and 0 < y < L/4? Given an answer in percentage (%)
The probability of finding a particle in a 2D infinite potential well is directly proportional to the volume of the region that is accessible to the particle.
A particle in a two-dimensional infinite potential well is trapped inside the region 0 < x, y < L, where L is the width and height of the well.
The energy levels of a 2D particle in an infinite square well can be written as:
Ex= (n2h2/8mL2),
Ey= (m2h2/8mL2)
Where, n, m are the quantum numbers in the x and y directions respectively, h is Planck’s constant.
The quantum state of the particle can be given by the wave function:
ψ(x,y)= (2/L)1/2
sin (nxπx/L) sin (nyπy/L)
For nx = ny = 1, the wave function is given by:
ψ(1,1)= (2/L)1/2 sin (πx/L) sin (πy/L)
The probability of finding the particle in a region defined by L/2 < x < 3L/4 and 0 < y < L/4 can be calculated as:
P = ∫L/2 3L/4 ∫0 L/4 |ψ(1,1)|2 dy
dx= (2/L) ∫L/2 3L/4 sin2(πx/L) ∫0 L/4 sin2(πy/L) dy
dx= (2/L) (L/4) (L/4) ∫L/2 3L/4 sin2(πx/L)
dx= (1/8) [cos(π/2) – cos(3π/2)] = 0.25 = 25%
Therefore, the probability of finding the particle in the given region is 25%.
Learn more about Planck’s constant: https://brainly.com/question/30763530
#SPJ11
A 2000 picoFarad capacitor is in series with a 3 milliHenry solenoid and a 170 Ohm resistor, and driven by an AC source with a maximum voltage of 6 V and a frequency of 3000 Hz. What's the frequency of the source in radians per second? What's the resonant frequency of the circuit in radians per second? What's the inductive reactance of the circuit? What's the capacitive reactance of the circuit? What's the impedance of the circuit?
The impedance of the circuit is approximately 13.68 kΩ.
To calculate the frequency of the source in radians per second, we can use the formula:
ω = 2πf
where ω is the angular frequency in radians per second and f is the frequency in hertz.
Given that the frequency is 3000 Hz, we can calculate the angular frequency as follows:
ω = 2π * 3000 Hz
= 6000π rad/s
Therefore, the frequency of the source in radians per second is 6000π rad/s.
To calculate the resonant frequency of the circuit, we can use the formula:
f_res = 1 / (2π√(LC))
where f_res is the resonant frequency, L is the inductance, and C is the capacitance.
Given that the capacitance is 2000 pF (picoFarad) and the inductance is 3 mH (milliHenry), we need to convert the units to Farads and Henrys respectively:
C = 2000 pF = 2000 * 10^(-12) F
L = 3 mH = 3 * 10^(-3) H
Now we can calculate the resonant frequency:
f_res = 1 / (2π√(3 * 10^(-3) * 2000 * 10^(-12)))
≈ 212.20 kHz
Therefore, the resonant frequency of the circuit is approximately 212.20 kHz.
The inductive reactance (XL) of the circuit is given by the formula:
XL = ωL
where XL is the inductive reactance, ω is the angular frequency, and L is the inductance.
Given that the inductance is 3 mH and the angular frequency is 6000π rad/s, we can calculate the inductive reactance:
XL = (6000π rad/s) * (3 * 10^(-3) H)
≈ 56.55 Ω
Therefore, the inductive reactance of the circuit is approximately 56.55 Ω.
The capacitive reactance (XC) of the circuit is given by the formula:
XC = 1 / (ωC)
where XC is the capacitive reactance, ω is the angular frequency, and C is the capacitance.
Given that the capacitance is 2000 pF and the angular frequency is 6000π rad/s, we can calculate the capacitive reactance:
XC = 1 / ((6000π rad/s) * (2000 * 10^(-12) F))
≈ 26.53 kΩ
Therefore, the capacitive reactance of the circuit is approximately 26.53 kΩ.
The impedance (Z) of the circuit is given by the formula:
Z = √(R^2 + (XL - XC)^2)
where Z is the impedance, R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.
Given that the resistance is 170 Ω, the inductive reactance is 56.55 Ω, and the capacitive reactance is 26.53 kΩ, we can calculate the impedance:
Z = √((170 Ω)^2 + (56.55 Ω - 26.53 kΩ)^2)
≈ 13.68 kΩ
Therefore, the impedance of the circuit is approximately 13.68 kΩ.
Learn more about impedance:
https://brainly.com/question/31369031
#SPJ11
What thickness of wood has the same insulating ability as 18 cm
of brick?
Take kbrick = 0.8 W/m K Take kwood = 0.1 W/m K
Give your answer in cm.
A thickness of approximately 2.25 cm of wood has the same insulating ability as 18 cm of brick.
To determine the thickness of wood that has the same insulating ability as 18 cm of brick, we can compare the thermal conductivity values of brick and wood.
Given information:
- Thermal conductivity of brick (k_brick): 0.8 W/m K
- Thermal conductivity of wood (k_wood): 0.1 W/m K
- Thickness of brick (t_brick): 18 cm
We need to find the equivalent thickness of wood (t_wood) in centimeters.
The formula for calculating the thermal resistance (R) is:
R = thickness / thermal conductivity
For brick, we have:
R_brick = t_brick / k_brick
For wood, we have:
R_wood = t_wood / k_wood
Since the insulating ability is the same for both materials, the thermal resistance values must be equal:
R_brick = R_wood
Substituting the values:
t_brick / k_brick = t_wood / k_wood
Solving for t_wood:
t_wood = (t_brick * k_wood) / k_brick
Plugging in the values:
t_wood = (18 cm * 0.1 W/m K) / 0.8 W/m K
t_wood = 2.25 cm
Therefore, a thickness of approximately 2.25 cm of wood has the same insulating ability as 18 cm of brick.
To know more about conductivity ,click here:
brainly.com/question/31201773
#SPJ11
Negative charges of -1.0 nC are located at corners of the figure shown below. The sides have a length of 200 cm. What is the electric field at the center C of the triangle?
The magnitude of the electric field at the center of the triangle is 600 N/C.
Electric Field: The electric field is a physical field that exists near electrically charged objects. It represents the effect that a charged body has on the surrounding space and exerts a force on other charged objects within its vicinity.
Calculation of Electric Field at the Center of the Triangle:
Given figure:
Equilateral triangle with three charges: Q1, Q2, Q3
Electric Field Equation:
E = kq/r^2 (Coulomb's law), where E is the electric field, k is Coulomb's constant, q is the charge, and r is the distance from the charge to the center.
Electric Field due to the negative charge Q1:
E1 = -kQ1/r^2 (pointing upwards)
Electric Field due to the negative charge Q2:
E2 = -kQ2/r^2 (pointing upwards)
Electric Field due to the negative charge Q3:
E3 = kQ3/r^2 (pointing downwards, as it is directly above the center)
Net Electric Field:
To find the net electric field at the center, we combine the three electric fields.
Since E1 and E2 are in the opposite direction, we subtract their magnitudes from E3.
Net Electric Field = E3 - |E1| - |E2|
Magnitudes and Directions:
All electric fields are in the downward direction.
Calculate the magnitudes of E1, E2, and E3 using Coulomb's law.
Calculation:
Substitute the values of charges Q1, Q2, Q3, distances, and Coulomb's constant into the electric field equation.
Calculate the magnitudes of E1, E2, and E3.
Determine the net electric field at the center by subtracting the magnitudes.
The magnitude of the electric field at the center is the result.
Result:
The magnitude of the electric field at the center of the triangle is 600 N/C.
Learn more about electric field:
https://brainly.com/question/26446532
#SPJ11
A solenoid that is 107 cm long has a radius of 1.90 cm and a winding of 1780 turns: it carries a current of 3.19 A. Calculate the magnitude of the magnetic field inside the solenoid.
The magnitude of the magnetic field inside the solenoid is approximately 0.025 T.
1. The magnetic field inside a solenoid can be calculated using the formula:
B = μ₀ * n * I
where B is the magnetic field, μ₀ is the permeability of free space (4π x 10^-7 T·m/A), n is the number of turns per unit length, and I is the current.
2. First, let's calculate the number of turns per unit length (n):
n = N / L
where N is the total number of turns and L is the length of the solenoid.
3. Plugging in the given values:
n = 1780 turns / 107 cm
4. Convert the length to meters:
L = 107 cm = 1.07 m
5. Calculate the number of turns per unit length:
n = 1780 turns / 1.07 m
6. Now we can calculate the magnetic field (B):
B = μ₀ * n * I
Plugging in the values:
B = (4π x 10^-7 T·m/A) * (1780 turns / 1.07 m) * 3.19 A
7. Simplifying the expression:
B ≈ 0.025 T
Therefore, the magnitude of the magnetic field inside the solenoid is approximately 0.025 T.
To know more about solenoid click here:
https://brainly.com/question/21842920
#SPJ11
A harmonic wave travels in the positive x direction at 14 m/s along a taught string. A fixed point on the string oscillates as a function of time according to the equation y = 0.026 cos(6t) where y is the displacement in meters and the time t is in seconds.
a) What is the amplitude of the wave, in meters?
b) What is the frequency of the wave, in hertz?
c) What is the wavelength of the wave, in meters?
Amplitude of the wave is 0.013 meters.
Frequency of the wave is 0.955 Hz
Wavelength of the wave is 14.65 meters.
Harmonic wave travels in the positive x direction at 14 m/s along a taught string. Fixed point on the string oscillates as a function of time according to the equation y = 0.026 cos(6t) where y is the displacement in meters and the time t is in seconds.
a) Amplitude is given by the equation;
A = maximum displacement/2A = 0.026/2 = 0.013 m
Amplitude of the wave is 0.013 meters.
b) From the equation of y; y = 0.026 cos(6t)
The frequency is given by the equation;
f = n/2πf = 6/2πf = 0.955 Hz
Frequency of the wave is 0.955 Hz.
c) The wave equation is given by;
y = A sin(kx - ωt) where
A = Amplitude,
k = Wave number,
ω = Angular frequency and
λ = wavelength.
Amplitude, A = 0.013 mω = 6 k = ω/v = 6/14 = 0.429 m-1λ = 2π/k = 2π/0.429 = 14.65 m
Wavelength of the wave is 14.65 meters.
Thus :
Amplitude of the wave is 0.013 meters.
Frequency of the wave is 0.955 Hz
Wavelength of the wave is 14.65 meters.
Learn more about amplitude https://brainly.com/question/3613222
#SPJ11
If I apply an acceleration for (2.440x10^0) seconds of (5.68x10^0) m/s2 when I hav an initial velocity of +(3.5200x10^0) m/s, what final velocity do I have?
The final velocity is approximately 1.74272 × 10¹ m/s.
To find the final velocity, we can use the kinematic equation:
v = u + at,
where
v is the final velocity,
u is the initial velocity,
a is the acceleration, and
t is the time.
Given:
Initial velocity (u) = + 3.5200 × 10 m/s
Acceleration (a) = 5.68 × 10 m/s²
Time (t) = 2.440 × 10 seconds
Substituting these values into the equation, we have:
v = 3.5200 × 10 m/s + 5.68 × 10 m/s² × 2.440 × 10 seconds.
v = (3.5200 + 5.68 × 2.440) × 10 m/s.
v = (3.5200 + 13.9072) × 10 m/s.
v = 17.4272 × 10 m/s.
v = 1.74272 × 10¹ m/s.
Therefore, the final velocity is approximately 1.74272 × 10¹ m/s.
Learn more about Equations of Kinematics from the given link:
https://brainly.com/question/28712225
#SPJ11
A low orbit satellite is one whose orbital radius not much larger, so can be assumed to be the
same as, the radius of the planet it orbits around.
a. The period of a low orbit satellite orbiting near the surface of Jupiter is about 10500 s. If the free fall acceleration on the surface is 25 m/s?, what is the radius of Jupiter (the
orbital radius)? b. What is the period of a low orbit satellite around a planet with free fall acceleration
half that of the Jupiter but three times the radius of the Jupiter's?
The period of a low orbit satellite around a planet with free fall acceleration half that of Jupiter but three times the radius of the Jupiter's is 4736.17 s.
a. The period of a low orbit satellite orbiting near the surface of Jupiter is about 10500 s. If the free fall acceleration on the surface is 25 m/s², what is the radius of Jupiter (the orbital radius)?Given,Period of the low orbit satellite, T = 10500 sAcceleration due to gravity on Jupiter, g = 25 m/s²Let the radius of Jupiter be r.Then, the height of the satellite above Jupiter's surface = r.T = 2π√(r/g)10500 = 2π√(r/25)10500/2π = √(r/25)r/25 = (10500/2π)²r = 753850.32 mTherefore, the radius of Jupiter is 753850.32 m.
b. The acceleration due to gravity on this planet is half of that of Jupiter. So, g = 12.5 m/s²The radius of the planet is three times the radius of Jupiter. Let R be the radius of this planet. Then, R = 3r.Height of the satellite from the surface of the planet = R - r.T' = 2π√((R - r)/g)T' = 2π√(((3r) - r)/(12.5))T' = 2π√(2r/12.5)T' = 2π√(8r/50)T' = 2π√(4r/25)T' = (2π/5)√rT' = (2π/5)√(753850.32)T' = 4736.17 sTherefore, the period of a low orbit satellite around a planet with free fall acceleration half that of Jupiter but three times the radius of the Jupiter's is 4736.17 s.
Learn more about period:
https://brainly.com/question/1073522
#SPJ11
1. a heavy object is lifted from the ground at a constant speed of 1.2 m/s for 2.5s and then it is dropped. At what speed does the heavy object hit the ground?
2. A 1.00x10^3 kg object is raised vertically at a constant velocity of 4.00 m/s by a crane. What is the power output of the crane is the object was raised 8.0 m from the ground?
1. The heavy object hits the ground with a speed of approximately 24 m/s.
2. The power output of the crane is 3.2 × 10⁴ W.
1. To determine the speed at which the heavy object hits the ground, we need to consider the two phases of its motion: lifting and dropping.
- Lifting phase: The object is lifted at a constant speed of 1.2 m/s for 2.5 seconds. During this phase, the object's velocity remains constant, so there is no change in speed.
- Dropping phase: After being dropped, the object falls freely under the influence of gravity. Assuming no air resistance, the object's speed increases due to the acceleration of gravity, which is approximately 9.8 m/s².
To find the speed when the object hits the ground, we can use the equation for free fall:
v = u + gt
where v is the final velocity, u is the initial velocity (0 m/s in this case since the object is dropped), g is the acceleration due to gravity, and t is the time of falling.
Using the equation, we have:
v = 0 + (9.8 m/s²)(2.5 s) ≈ 24 m/s
Therefore, the heavy object hits the ground with a speed of approximately 24 m/s.
2. The power output of the crane can be calculated using the formula:
Power = Force × Velocity
In this case, the force is the weight of the object, which is given by:
Force = mass × acceleration due to gravity
Force = (1.00 × 10³ kg) × (9.8 m/s²) = 9.8 × 10³ N
The velocity is the constant velocity at which the object is raised, which is 4.00 m/s.
Using the formula for power, we have:
Power = (9.8 × 10³ N) × (4.00 m/s) = 3.92 × 10⁴ W
Therefore, the power output of the crane is 3.2 × 10⁴ W.
To know more about speed refer here:
https://brainly.com/question/28224010#
#SPJ11
b) Show that the density of state per unit volume g(εF) of the fermi sphere of a conductor is: g(εF)=2π21(h22me)3/2εF1/2
The density of states per unit volume, g(εF), of the Fermi sphere of a conductor is given by g(εF) = (2π^2 / (h^3))(2m/εF)^(3/2).
To derive this expression, we start with the concept of a Fermi sphere, which represents the distribution of electron states up to the Fermi energy (εF) in a conductor. The density of states measures the number of available states per unit energy interval.
By considering the volume of a thin spherical shell in k-space, we can derive an expression for g(εF). Integrating over this shell and accounting for the degeneracy of the states (due to spin), we arrive at g(εF) = (2π^2 / (h^3))(2m/εF)^(3/2).
Here, h is Planck's constant, m is the mass of an electron, and εF is the Fermi energy.
This expression highlights the dependence of g(εF) on the Fermi energy and the effective mass of electrons in the conductor. It provides a quantitative measure of the available electron states at the Fermi level and plays a crucial role in understanding various properties of conductors, such as electrical and thermal conductivity.
To learn more about volume click here brainly.com/question/31606882
#SPJ11
Sound is passing perpendicularly through an open window whose
dimensions are 1.1 m x 0.75 m. The sound intensity level is 91 dB
above the threshold of human hearing. How much sound
energy comes"
The sound energy passing perpendicularly through an open window whose dimensions are 1.1 m x 0.75 m is 2.61 × 10^-5 W.
Given, sound intensity level is 91 dB above the threshold of human hearing.
Sound energy is the amount of energy produced when sound waves propagate through any given medium. This energy moves through the medium of the wave in longitudinal waves. The equation for the energy of sound is E=1/2mv² or E = power x time or E = mC(ΔT).
The formula to calculate sound energy is E=IA, where E= Sound energy, I= Sound Intensity, A= Area. The sound intensity level is given as 91 dB. The threshold of human hearing is 10^-12 W/m².Therefore, the sound intensity is
I = 10^((91- 0)/10) × 10^-12 W/m² = 3.1623 × 10^-5 W/m².
The area of the window is given as A = 1.1 m x 0.75 m = 0.825 m².
The sound energy through the window is E = I x A = 3.1623 × 10^-5 W/m² × 0.825 m² = 2.61 × 10^-5 W.
Therefore, the sound energy passing perpendicularly through an open window whose dimensions are 1.1 m x 0.75 m is 2.61 × 10^-5 W.
Learn more about Sound energy https://brainly.com/question/30763236
#SPJ11
A light ray traveling from air at an incident angle of 25° with the normal. The corresponding angle of refraction in glass was measured to be 16º. Find the refractive index (n) of glass. Use the value of n to find the speed of light in glass. (n for air = 1, Speed of light in air = 3x108 m/s = Equations Nair sin 01 = nglass sin O2, n = c/V
When a light ray travels from air at an incident angle of 25 degrees with the normal, and the corresponding angle of refraction in glass was measured to be 16 degrees. To find the refractive index (n) of glass, we need to use the formula:
Equation 1:
Nair sin 01 = n glass sin O2The given values are:
01 = 25 degreesO2
= 16 degrees Nair
= 1 We have to find n glass Substitute the given values in the above equation 1 and solve for n glass. n glass = [tex]Nair sin 01 / sin O2[/tex]
[tex]= 1 sin 25 / sin 16[/tex]
= 1.538 Therefore the refractive index of glass is 1.538.To find the speed of light in glass, we need to use the formula:
Equation 2:
[tex]n = c/V[/tex] where, n is the refractive index of the glass, c is the speed of light in air, and V is the speed of light in glass Substitute the given values in the above equation 2 and solve for V.[tex]1.538 = (3 x 108) / VV = (3 x 108) / 1.538[/tex]
Therefore, the speed of light in glass is[tex]1.953 x 108 m/s.[/tex]
To know more about incident visit:
https://brainly.com/question/14019899
#SPJ11
A satellite of mass 648.9 kg is moving in a stable circular orbit about the Earth at a height of 7RE, where RE = 6400km = 6.400 x 106 m = 6.400 Mega-meters is Earth’s radius. The gravitational force (in newtons) on the satellite while in orbit is:
To calculate the gravitational force on the satellite while in orbit, we can use Newton's law of universal gravitation. The formula is as follows:
F = (G * m1 * m2) / r^2
Where:
F is the gravitational force
G is the gravitational constant (approximately 6.67430 × 10^-11 N m^2 / kg^2)
m1 and m2 are the masses of the two objects (in this case, the satellite and Earth)
r is the distance between the centers of the two objects (the radius of the orbit)
In this scenario, the satellite is in a circular orbit around the Earth, so the gravitational force provides the necessary centripetal force to keep the satellite in its orbit. Therefore, the gravitational force is equal to the centripetal force.
The centripetal force can be calculated using the formula:
Fc = (m * v^2) / r
Where:
Fc is the centripetal force
m is the mass of the satellite
v is the velocity of the satellite in the orbit
r is the radius of the orbit
Since the satellite is in a stable circular orbit, the centripetal force is provided by the gravitational force. Therefore, we can equate the two equations:
(G * m1 * m2) / r^2 = (m * v^2) / r
We can solve this equation for the gravitational force F:
F = (G * m1 * m2) / r
Now let's plug in the values given in the problem:
m1 = mass of the satellite = 648.9 kg
m2 = mass of the Earth = 5.972 × 10^24 kg (approximate)
r = radius of the orbit = 7RE = 7 * 6.400 x 10^6 m
Calculating:
F = (6.67430 × 10^-11 N m^2 / kg^2 * 648.9 kg * 5.972 × 10^24 kg) / (7 * 6.400 x 10^6 m)^2
F ≈ 2.686 × 10^9 N
Therefore, the gravitational force on the satellite while in orbit is approximately 2.686 × 10^9 Newtons.
To know more about gravitational force click this link -
brainly.com/question/32609171
#SPJ11
To what temperature would you have to heat a brass rod for it to
be 2.2 % longer than it is at 26 ∘C?
The brass rod must be heated to 1157.89°C to be 2.2% longer than it is at 26°C.
When a brass rod is heated, it expands and increases in length. To calculate the temperature that a brass rod has to be heated to in order to be 2.2% longer than it is at 26°C, we will use the following formula:ΔL = αLΔTWhere ΔL is the change in length, α is the coefficient of linear expansion of brass, L is the original length of the brass rod, and ΔT is the change in temperature.α for brass is 19 × 10-6 /°C.ΔL is given as 2.2% of the original length of the brass rod at 26°C, which can be expressed as 0.022L.
Substituting the values into the formula:
0.022L = (19 × 10-6 /°C) × L × ΔT
ΔT = 0.022L / (19 × 10-6 /°C × L)
ΔT = 1157.89°C.
The brass rod must be heated to 1157.89°C to be 2.2% longer than it is at 26°C.
To know more about brass rod visit:-
https://brainly.com/question/30693460
#SPJ11
A 60.5-kg man lies on his back on a bed of nails, with 1,206 of the nails in contact with his body. The end of each nail has area 1.10 ✕ 10−6 m2. What average pressure is exerted by each nail on the man's body?
Pa
Each nail exerts an average pressure of approximately 5.02 × 10^6 Pascal (Pa) on the man's body.
To determine the average pressure exerted by each nail on the man's body, we can use the formula:Pressure = Force / Area. The force exerted by each nail can be calculated by multiplying the weight of the man by the number of nails in contact with his body. The weight can be calculated as:Weight = mass * gravitational acceleration.where the mass of the man is given as 60.5 kg and the gravitational acceleration is approximately 9.8 m/s².Weight = 60.5 kg * 9.8 m/s².Next, we divide the weight by the number of nails in contact to find the force exerted by each nail:Force = Weight / Number of nails
Force = (60.5 kg * 9.8 m/s²) / 1206 nails
Now, we can calculate the average pressure exerted by each nail bydividing the force by the area of each nail:Pressure = Force / Area
Pressure = [(60.5 kg * 9.8 m/s²) / 1206 nails] / (1.10 × 10^(-6) m²)
Simplifying the expression gives us the average pressure:
Pressure ≈ 5.02 × 10^6 Pa
Therefore, each nail exerts an average pressure of approximately 5.02 × 10^6 Pascal (Pa) on the man's body.
To learn more about pressure:
https://brainly.com/question/29341536
#SPJ11
. A reversible cycle executed by 1 mol of an ideal gas for which CP = (5/2)R and CV = (3/2)R consists of the following:
∙ Starting at T1 = 700 K and P1 = 1.5 bar, the gas is cooled at constant pressure to T2 = 350 K.
∙ From 350 K and 1.5 bar, the gas is compressed isothermally to pressure P2.
∙ The gas returns to its initial state along a path for which PT = constant.
What is the thermal efficiency of the cycle?
The question provides information about a reversible cycle executed by 1 mol of an ideal gas with specific heat capacities CP = (5/2)R and CV = (3/2)R. The cycle involves cooling at constant pressure, isothermal compression, and return along a path of constant temperature.
What is the thermal efficiency of the reversible cycle executed by 1 mol of an ideal gas with specific heat capacities CP = (5/2)R and CV = (3/2)R?To calculate the thermal efficiency of the cycle, we need to determine the heat absorbed and the work done during each stage of the cycle.
Cooling at constant pressure (T1 to T2)
Since the gas is cooled at constant pressure, the heat absorbed (Q1) can be calculated using the equation Q1 = nCpΔT, where n is the number of moles, Cp is the molar heat capacity at constant pressure, and ΔT is the temperature change. In this case, Q1 = nCp(T2 - T1).
Isothermal compression (T2, P2)
During isothermal compression, the work done (W2) can be calculated using the equation W2 = -nRTln(V2/V1), where R is the gas constant, T is the temperature, and V1 and V2 are the initial and final volumes. In this case, W2 = -nRTln(P1/P2).
Return to initial state at constant temperature (PT)
Since the process occurs at constant temperature, no heat is exchanged (Q3 = 0). The work done (W3) is given by the equation W3 = -nRTln(V1/VT), where VT is the final volume.
The total work done in the cycle is the sum of W2 and W3, and the thermal efficiency (η) is given by the equation η = (Q1 + Q3) / (Q1 + W2 + W3).
By substituting the appropriate equations and values, the thermal efficiency of the cycle can be calculated.
Learn more about heat capacities
brainly.com/question/28495814
#SPJ11
a) If the ball freely falls for 4.0 seconds, how tall is this cliff?
b) Determine the velocity of this ball just before it hits the ground. Express your answer in
vector component form.
c) A 16-m tall tree stands 45 meters from the base of this cliff. Will the ball go over
tree? Defend your answer quantitatively.
The cliff is 48 meters tall. The velocity of the ball just before it hits the ground is 30.67 m/s. The ball will go over the tree.
A) If the ball freely falls for 4.0 seconds, how tall is this cliff?
The height of the cliff can be calculated using the following equation:
[tex]h = 0.5 \times g \times t^2[/tex]
where
h is the height of the cliff (in meters)
g is the acceleration due to gravity (9.8 m/s^2)
t is the time it takes for the ball to fall (in seconds)
Plugging in the values for h and t, we get:
[tex]h = 0.5 \times 9.8 m/s^2 \times 4.0 s^2[/tex]
= 48 m
Therefore, the cliff is 48 meters tall.
B) Determine the velocity of this ball just before it hits the ground. Express your answer in vector component form.
The velocity of the ball just before it hits the ground can be calculated using the following equation:
[tex]v = g \times t[/tex]
where
v is the velocity of the ball (in m/s)
g is the acceleration due to gravity (9.8 m/s^2)
t is the time it takes for the ball to fall (in seconds)
Plugging in the values for v and t, we get:
v = 9.8 m/s^2 * 4.0 s
= 30.67 m/s
The velocity of the ball is in the downward direction, so the vector component form of the velocity is:
(0, -30.67) m/s
C) A 16-m tall tree stands 45 meters from the base of this cliff. Will the ball go over tree? Defend your answer quantitatively.
The distance between the ball and the tree is 45 meters. The height of the ball is 30.67 meters. Therefore, the ball will go over the tree.
To see this quantitatively, we can use the Pythagorean theorem. The distance between the ball and the tree is the hypotenuse of a right triangle, with the height of the ball and the distance from the base of the cliff to the tree as the other two sides. The Pythagorean theorem states that the square of the hypotenuse is equal to the sum of the squares of the other two sides. In this case, we have:
[tex](hypotenuse)^2 = (height)^2 + (base)^2[/tex]
[tex](30.67 m)^2 = (16 m)^2 + (45 m)^2[/tex]
[tex]937.29 m^2 = 256 m^2 + 2025 m^2[/tex]
[tex]937.29 m^2 = 2281 m^2[/tex]
[tex](hypotenuse)^2 = 2281 m^2[/tex]
hypotenuse = 47.77 m
Therefore, the distance between the ball and the tree is 47.77 meters. This is greater than the height of the ball, so the ball will go over the tree.
To learn more about velocity here brainly.com/question/30559316
#SPJ11
I. Short answer questions. (12 points each) 1. (a) In experiments, why did we usually connect a 330 32 resistor with a LED in circuit? (b) When we use transistors in amplifier circuit, we usually connect capacitors between the transistor terminals and input and output. What's the main reason of using these capacitors?
Capacitors are also used in feedback circuits to control the frequency response of the amplifier. By choosing the appropriate value of the capacitor, the cutoff frequency of the amplifier can be set, thereby limiting the frequency response of the amplifier.
(a) In experiments, a 330Ω resistor is usually connected with a LED in a circuit to limit the current flow through the LED and protect it from burning out. A LED is a type of diode that emits light when it is forward-biased. When a voltage is applied across its terminals in the forward direction, it allows the current to flow. As a result, the LED emits light.
However, since LEDs have a low resistance, a high current will flow through them if no resistor is used. This can cause them to burn out, and hence, to avoid this, a 330Ω resistor is connected in series with the LED.
(b) The main reason for using capacitors between the transistor terminals and input and output in an amplifier circuit is to couple the signals and remove any DC bias. A capacitor is an electronic component that stores electric charge.
When an AC signal is applied to the capacitor, it charges and discharges accordingly, allowing the AC signal to pass through it. However, it blocks DC signals and prevents them from passing through it.
In an amplifier circuit, coupling capacitors are used to connect the input and output signals to the transistor. They allow the AC signal to pass through while blocking any DC bias, which could distort the AC signal.
The capacitors remove any DC bias that might be present and prevent it from affecting the amplification process.
Additionally, capacitors are also used in feedback circuits to control the frequency response of the amplifier. By choosing the appropriate value of the capacitor, the cutoff frequency of the amplifier can be set, thereby limiting the frequency response of the amplifier.
To know more about Capacitors visit:
https://brainly.com/question/31627158
#SPJ11
Q4 4. A disk of radius 2.5cm has a surface charge density of 7.0MC/m2 on its upper face. What is the magnitude of the electric field produced by the disk at a point on its central axis at distance z =12cm from the disk?
The magnitude of the electric field produced by the disk at a point on its central axis at a distance z = 12cm from the disk is 4.36 x 10⁴ N/C.
The electric field produced by a disk of radius r and surface charge density σ at a point on its central axis at a distance z from the disk is given by:
E=σ/2ε₀(1-(z/(√r²+z²)))
Here, the disk has a radius of 2.5cm and a surface charge density of 7.0MC/m² on its upper face. The distance of the point on the central axis from the disk is 12cm, i.e., z = 12cm = 0.12m.
The value of ε₀ (the permittivity of free space) is 8.85 x 10⁻¹² F/m.
The electric field is given by:
E = (7.0 x 10⁶ C/m²)/(2 x 8.85 x 10⁻¹² F/m)(1 - 0.12/(√(0.025)² + (0.12)²))E = 4.36 x 10⁴ N/C
To know more about magnitude:
https://brainly.com/question/31022175
#SPJ11
Terminals A and B in the figure are connected to a Part A 15 V battery(Figure 1). Consider C1=15μF,C2 =8.2μF, and C3=22μF. Find the energy stored in each capacitor. Express your answers using two significant figures separated by commas. X Incorrect; Try Again; 7 attempts remaining
The energy stored in each capacitor is approximately is 1.7e-4 J,9.2e-4 J and 2.5e-3 J. To find the energy stored in each capacitor, we can use the formula:
Energy = (1/2) * C * [tex]V^2[/tex]
where C is the capacitance and V is the voltage across the capacitor.
For C1 with a capacitance of 15 μF and voltage of 15 V:
Energy1 = (1/2) * (15 μF) * ([tex]15 V)^2[/tex]
Calculating this expression:
Energy1 = (1/2) * 15e-6 F * (15 [tex]V)^2[/tex]
Energy1 = 0.00016875 J or 1.7e-4 J (rounded to two significant figures)
For C2 with a capacitance of 8.2 μF and voltage of 15 V:
Energy2 = (1/2) * (8.2 μF) * (15[tex]V)^2[/tex]
Calculating this expression:
Energy2 = (1/2) * 8.2e-6 F * (15 [tex]V)^2[/tex]
Energy2 = 0.00091875 J or 9.2e-4 J (rounded to two significant figures)
For C3 with a capacitance of 22 μF and voltage of 15 V:
Energy3 = (1/2) * (22 μF) * (15[tex]V)^2[/tex]
Calculating this expression:
Energy3 = (1/2) * 22e-6 F * [tex](15 V)^2[/tex]
Energy3 = 0.002475 J or 2.5e-3 J (rounded to two significant figures)
Therefore, the energy stored in each capacitor is approximately:
Energy1 = 1.7e-4 J
Energy2 = 9.2e-4 J
Energy3 = 2.5e-3 J
Learn more about capacitance here:
https://brainly.com/question/31871398
#SPJ11
Calculate the angular momentum for a rotating disk, sphere, and rod. (a) A uniform disk of mass 17 kg, thickness 0.5 m, and radius 0.9 m is located at the origin, oriented with its axis along the y axis. It rotates clockwise around its axis when viewed from above (that is, you stand at a point on the +y axis and look toward the origin at the disk). The disk makes one complete rotation every 0.5 s. What is the rotational angular momentum of the disk? What is the rotational kinetic energy of the disk? (Express your answer for rotational angular momentum in vector form.) Lrot = kg · m2/s Krot = J (b) A sphere of uniform density, with mass 26 kg and radius 0.2 m, is located at the origin and rotates around an axis parallel with the x axis. If you stand somewhere on the +x axis and look toward the origin at the sphere, the sphere spins counterclockwise. One complete revolution takes 0.6 s. What is the rotational angular momentum of the sphere? What is the rotational kinetic energy of the sphere? (Express your answer for rotational angular momentum in vector form.) Lrot = kg · m2/s Krot = J (c) A cylindrical rod of uniform density is located with its center at the origin, and its axis along the z axis. Its radius is 0.05 m, its length is 0.7 m, and its mass is 4 kg. It makes one revolution every 0.08 s. If you stand on the +x axis and look toward the origin at the rod, the rod spins clockwise. What is the rotational angular momentum of the rod? What is the rotational kinetic energy of the rod? (Express your answer for rotational angular momentum in vector form.) Lrot = kg · m2/s Krot = J
The rotational angular momentum for the rotating disk, sphere, and rod are [tex]86.183 kgm^2/s,8.727 kgm^2/s[/tex] and [tex]12.791 kgm^2/s[/tex] respectively; and the rotational kinetic energy for the rotating disk, sphere, and rod are [tex]876.174J,229.251J[/tex] and [tex]396.682J[/tex] respectively.
(a) For the rotating disk, the moment of inertia is given by [tex]I=(\frac{1}{2}) mr^{2}[/tex], where m is the mass and r is the radius.
Substituting the given values, we have
[tex]I =(\frac{1}{2}) (17 kg)(0.9 m)^2 = 6.885 kgm^{2} .[/tex]
The angular velocity is ω = 2πf, where f is the frequency.In this case,
[tex]f = \frac{1}{0.5 s} = 2 Hz[/tex]
So, ω = 2π(2 Hz) = 4π rad/s.
The rotational angular momentum is then,
[tex]L_r_o_t = (6.885 kgm^2)(4\pi rad/s) = 86.183 kgm^2/s[/tex]
The rotational kinetic energy is,
[tex]K_r_o_t =(\frac{1}{2})(6.885 kgm^2)(4\pi rad/s)^2 = 876.174 J.[/tex]
(b) For the rotating sphere,
The moment of inertia is[tex]I = (\frac{2}{5})mr^2[/tex]
where m is the mass and r is the radius.
Substituting the given values, we have
[tex]I = (\frac{2}{5})(26 kg)(0.2 m)^2 = 0.832 kgm^2.[/tex]
The angular velocity is ω = 2πf, where f is the frequency.
In this case,
[tex]f =(\frac {1}{0.6 s}) = 1.67 Hz[/tex]
So, ω = 2π(1.67 Hz) ≈ 10.49 rad/s.
The rotational angular momentum is then,
[tex]L_r_o_t = (0.832 kgm^2)(10.49 rad/s) \approx 8.727 kgm^2/s.[/tex]
The rotational kinetic energy is,
[tex]K_r_o_t = (\frac{1}{2})(0.832 kgm^2)(10.49 rad/s)^2 \approx229.251 J.[/tex]
(c) For the rotating rod,
The moment of inertia is [tex]I = (\frac{1}{12})ml^2[/tex]
where m is the mass and l is the length.
Substituting the given values, we have
[tex]I = (\frac{1}{12})(4 kg)(0.7 m)^2 = 0.163 kgm^2.[/tex]
The angular velocity is ω = 2πf, where f is the frequency.
In this case,
[tex]f =(\frac {1}{0.08 s}) = 12.5 Hz[/tex]
So, ω = 2π(12.5 Hz) = 78.54 rad/s.
The rotational angular momentum is then,
[tex]L_r_o_t = (0.163 kgm^2)(78.54 rad/s) \approx12.791 kgm^2/s[/tex]
The rotational kinetic energy is,
[tex]K_r_o_t = (\frac{1}{2})(0.163 kgm^2)(78.54 rad/s)^2 \approx396.682 J.[/tex]
Therefore, the rotational angular momentum for the rotating disk, sphere, and rod are [tex]86.183 kgm^2/s,8.727 kgm^2/s[/tex] and [tex]12.791 kgm^2/s[/tex] respectively; and the rotational kinetic energy for the rotating disk, sphere, and rod are [tex]876.174J,229.251J[/tex] and [tex]396.682J[/tex] respectively.
Learn more about momentum here: brainly.com/question/30337885
#SPJ11