The apparent loss of mass from 253.0 g to 250.2 g can be attributed to the involvement of a gas in the chemical reaction, either as a product or a reactant. This gas escapes the system during the reaction, causing a decrease in the observed mass, but the law of conservation of mass still holds true as the total mass is conserved in the reaction.
According to the law of conservation of mass, the total mass of the products of a chemical reaction should equal the total mass of the reactants. In your reaction, the mass went down from 253.0 g to 250.2 g, which seems to contradict this law. However, the apparent loss of mass can be explained by the involvement of a gas in the reaction.
Here's a step-by-step explanation:
1. Identify the given chemical equation. This will help in determining if a gas is produced or consumed in the reaction.
2. Examine the reactants and products to see if any of them are gases. Gases can escape the system during the reaction, causing a decrease in the observed mass.
3. If a gas is produced, this explains the apparent loss of mass. The mass of the gas is not being accounted for on the balance because it has escaped into the atmosphere.
4. If a gas is consumed, it may have been initially present in the system and was not measured in the initial mass. Once it is consumed, the mass of the system would appear to decrease.
In summary, the apparent loss of mass from 253.0 g to 250.2 g can be attributed to the involvement of a gas in the chemical reaction, either as a product or a reactant.
To know more about law of conservation of mass :
https://brainly.com/question/13600416
#SPJ11
Determine the number of moles present in each compound. 6.50 g ZnSO4.
The number of moles present in 6.50g of ZnSO4 is 0.0403 moles.
How to calculate no of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
no of moles = mass ÷ molar mass
According to this question, 6.50 grams of zinc sulphate is given. The number of moles in the substance can be calculated as follows:
molar mass of zinc sulphate = 161.47 g/mol
no of moles = 6.50g ÷ 161.47 g/mol
no of moles = 0.0403 moles
Learn more about moles at: https://brainly.com/question/20928252
#SPJ1
A current of 4. 82 A4. 82 A is passed through a Sn(NO3)2Sn(NO3)2 solution. How long, in hours, would this current have to be applied to plate out 6. 70 g6. 70 g of tin
The current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.
The amount of tin plated out can be calculated using Faraday's law of electrolysis, which states:
Mass of substance plated = (Current x Time x Atomic weight) / (Valency x Faraday's constant)
The atomic weight of tin is 118.71 g/mol, and its valency is 2 (since it forms Sn2+ ions in the solution). The Faraday's constant is 96,485 C/mol.
Plugging in the given values, we get:
6.70 g = (4.82 A x t x 118.71 g/mol) / (2 x 96485 C/mol)
Solving for t, we get:
t = (6.70 g x 2 x 96485 C/mol) / (4.82 A x 118.71 g/mol)
t = 10.33 hours
Therefore, the current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.
To know more about Faraday's law refer to-
https://brainly.com/question/1640558
#SPJ11
Katja plans an experiment that measures the temperature of different colors of paper placed in sunlight. Her hypothesis is that if black, blue, yellow, red, and white sheets of paper are exposed to white light, then the black sheet of paper will increase the most in temperature. Katja will place a sheet of each color of paper of the same size and thickness in the same location for the same amount of time. Why will katja use different colors of paper in her experiment?
Katja will use different colors of paper in her experiment to test her hypothesis and determine which color of paper will increase the most in temperature when exposed to sunlight.
By using a variety of colors, Katja can compare the results and determine if her hypothesis is correct or if another color of paper increases the most in temperature.
This experiment will provide valuable information about the effects of different colors on temperature and can be useful in a variety of applications, such as in the development of materials that are resistant to heat or for designing energy-efficient buildings that reflect sunlight.
Ultimately, the use of different colors of paper in this experiment allows for a more thorough and accurate analysis of the relationship between color and temperature.
To know more about sunlight click on below link:
https://brainly.com/question/27183506#
#SPJ11
Ethylene is burned with 33% excess air. the analysis of the dry base combustion products indicates the presence of 6.06% of 2 by volume. the rest of the results have been lost. what percent of the carbon in the fuel has been converted to instead of 2?
87.88% of the carbon in the fuel has been converted to CO instead of CO2 during the combustion of ethylene with 33% excess air.
Combustion is a chemical reaction in which a substance reacts with oxygen to release energy in the form of heat and light. In this case, ethylene is being burned with 33% excess air, meaning there is more oxygen available than required for complete combustion.
The analysis of the dry base combustion products indicates that 6.06% of the products are CO2 by volume. Since the rest of the results have been lost, we can only work with the given information.
To determine the percentage of carbon in the fuel converted to CO instead of CO2, we need to first find the percentage of carbon converted to CO2. In complete combustion, each carbon atom in ethylene (C2H4) would react with oxygen to form one molecule of CO2. The balanced chemical equation for complete combustion of ethylene is:
C2H4 + 3O2 -> 2CO2 + 2H2O
Now, we know that 6.06% of the combustion products are CO2. Since ethylene has two carbon atoms, the percentage of carbon in the fuel converted to CO2 is 2 x 6.06% = 12.12%.
To find the percentage of carbon converted to CO instead of CO2, we need to subtract this percentage from the total carbon content in the fuel, which is 100% (since all carbon will be either converted to CO or CO2). Therefore, the percentage of carbon in the fuel converted to CO instead of CO2 is:
100% - 12.12% = 87.88%
So, 87.88% of the carbon in the fuel has been converted to CO instead of CO2 during the combustion of ethylene with 33% excess air.
To know more about ethylene, visit:
https://brainly.com/question/14797464#
#SPJ11
What volume of solution is required to create a solution of a concentration of 1.3x 10^-2 M from 1.0x 10^-3 moles of calcium hydroxide
Approximately 0.0769 liters (76.9 mL) of solution is required to create a 1.3 x [tex]10^-2[/tex] M concentration of calcium hydroxide using [tex]1.0 x 10^-3[/tex] moles of solute.
A solute is a material that a solvent can dissolve into a solution. A solute can take on various shapes. It might exist as a solid, a liquid, or a gas. Solvent refers to the component of a solution that is most prevalent. It is the fluid in which the solute has been dissolved.
Molarity (M) = moles of solute / volume of solution (L)
Here, you're given the desired molarity ([tex]1.3 x 10^-2[/tex] M) and the moles of solute ([tex]1.0 x 10^-3[/tex]moles). You need to find the volume of solution (in liters).
Volume (L) = moles of solute / Molarity (M)
Now, plug in the given values:
Volume (L) = [tex](1.0 x 10^-3[/tex] moles) / ([tex]1.3 x 10^-2[/tex]M)
Volume (L) ≈ 0.0769 L
For more such question on hydroxide
https://brainly.com/question/21393201
#SPJ11
Scientists sometimes use chemical reactions to reclaim metals from solutions. They do this to reduce toxic waste. Does this mean that the metal has disappeared? Explain your answer
No, the metal has not disappeared. Chemical reactions only rearrange atoms and do not destroy or create them.
In the case of reclaiming metals from solutions, a chemical reaction is used to separate the metal ions from other elements in the solution, allowing the metal to be recovered in a pure form. This is typically achieved by adding a reactant that will cause the metal ions to precipitate out of the solution as a solid, which can then be separated and processed further to extract the metal.
So, the metal is still present in the reaction mixture, but it is now in a more concentrated and recoverable form. This process is important for reducing the amount of toxic waste generated from industrial processes and can also help to conserve natural resources by recycling valuable metals.
To learn more about reclaiming metals, here
https://brainly.com/question/15018157
#SPJ4
40g of sodium chloride solution was made to react with 14. 50g of lead trioxonitrate (V)o produce 13. 20g of lead chloride precipitate and sodium
trioxonitrate (v] solution
When sodium chloride solution is added to lead nitrate solution then it results in the formation of a precipitate of lead chloride and sodium nitrate.
Precipitation reactions occur when cations and anions in aqueous solution combine to form an insoluble ionic solid called a precipitate. Whether or not such a reaction occurs can be determined by using the solubility rules for common ionic solids Percent composition tells you which types of atoms (elements) are present in a molecule and their levels. Percent composition can also tell you about the different elements present in an ionic compound as well.
To learn more about precipitation reaction check the link below-
https://brainly.com/question/13016165
#SPJ4
If the boiling point of ethanol went up 6. 8 degrees, how many grams of PbCl4 were added to 2700 grams of ethanol? round to nearest tenth
Approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.
To determine the grams of PbCl4 added to 2700 grams of ethanol, causing the boiling point to increase by 6.8 degrees, we will use the molality-based boiling point elevation formula, which is:
ΔTb = Kb * m
Here, ΔTb is the change in boiling point (6.8 degrees), Kb is the molal boiling point elevation constant of ethanol (1.22 °C kg/mol), and m is the molality (moles of solute per kg of solvent).
First, we need to find the molality (m) of the solution:
6.8 = 1.22 * m
m = 6.8 / 1.22 ≈ 5.57 mol/kg
Now, we can calculate the moles of PbCl4 added to the ethanol:
5.57 mol/kg * (2700 g / 1000 g/kg) ≈ 15.03 mol of PbCl4
Next, we need to find the molar mass of PbCl4:
Pb: 207.2 g/mol
Cl: 35.45 g/mol
Molar mass of PbCl4 = 207.2 + (4 * 35.45) ≈ 350.6 g/mol
Finally, we can calculate the grams of PbCl4 added to the ethanol:
15.03 mol * 350.6 g/mol ≈ 5272.2 g
Therefore, approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.
To know more about ethanol, visit:
https://brainly.com/question/25002448#
#SPJ11
Green tea has a ph of 8.2 what is the (oh-) and is it acidic or basic
The (OH⁻) concentration in green tea with a pH of 8.2 is 6.31 x 10⁻⁷ M.
This suggests that the solution is slightly basic in nature. pH is a measure of hydrogen ion concentration, and the higher the pH, the lower the hydrogen ion concentration.
This means that in green tea, there are more hydroxide ions than hydrogen ions present, making it a basic solution.
It is important to note that the pH of green tea can vary depending on the brand and preparation method. Nonetheless, overall, green tea is considered a healthy beverage due to its antioxidant properties and potential health benefits.
To know more about pH click on below link:
https://brainly.com/question/2288405#
#SPJ11
Use the scenario to answer the question. a student is examining scientific evidence to support the following claim. ""life is possible because of the unique mixture of gases that cycle through the earth’s spheres."" which evidence best supports the student’s claim?
The evidence that best supports the student's claim that "life is possible because of the unique mixture of gases that cycle through the Earth's spheres" is the presence and balance of oxygen, nitrogen, and carbon dioxide in the atmosphere.
These gases play a crucial role in maintaining life on Earth by supporting respiration, regulating temperature, and enabling the carbon cycle, which allows organisms to exchange and utilize carbon for growth and energy production.
Oxygen: Oxygen is a vital gas for sustaining life on Earth. It is a key component of the atmosphere, making up about 21% of its composition. Oxygen is essential for respiration, the process by which organisms extract energy from food.
Through respiration, organisms break down glucose (derived from food) and use oxygen to produce energy-rich molecules called adenosine triphosphate (ATP).
This energy is necessary for cellular functions and metabolic activities. Many organisms, including humans, require oxygen to survive.
Nitrogen: Nitrogen is the most abundant gas in the Earth's atmosphere, accounting for approximately 78% of its composition. Although nitrogen is relatively inert and does not directly participate in biological processes, it is crucial for life.
Nitrogen is an essential component of amino acids, proteins, and nucleic acids (DNA and RNA), which are fundamental building blocks of life. Nitrogen fixation, a process carried out by certain bacteria, converts atmospheric nitrogen into forms that can be used by plants and other organisms.
This allows nitrogen to enter the food chain and support the growth and development of living organisms.
Carbon Dioxide: Carbon dioxide is a greenhouse gas and an integral part of the Earth's carbon cycle. It plays a significant role in regulating the planet's temperature through the greenhouse effect.
Carbon dioxide traps heat in the atmosphere, preventing excessive heat loss into space and maintaining a suitable temperature range for life. Additionally, carbon dioxide is essential for photosynthesis, a process carried out by plants and other autotrophic organisms.
During photosynthesis, carbon dioxide is absorbed, and with the help of sunlight, it is converted into glucose and oxygen. This process not only provides oxygen for respiration but also allows organisms to utilize carbon for growth, energy production, and the formation of organic compounds.
To learn more about glucose, refer below:
https://brainly.com/question/30548064
#SPJ11
A 7.32 l tire contains 0.448 mol of gas at a temperature of 28°c. what is the pressure (in atm) of the gas in the tire?
The pressure of a gas is directly proportional to the number of moles of gas present, and inversely proportional to the volume of the container. Therefore, given the temperature of the gas in the tire remains constant, the pressure of the gas can be calculated using the ideal gas law:
PV = nRT
Where P is pressure, V is volume, n is number of moles, R is the ideal gas constant, and T is temperature.
In this case, the number of moles is 0.448 mol, the temperature is 28°C (or 301 K), and the volume is 7.32 l.
Plugging in all the values, we get:
P = (0.448 mol) × (8.314 L·atm·K−1·mol−1) × (301 K) / (7.32 l)
P = 4.20 atm
Therefore, the pressure of the gas in the tire is 4.20 atm.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
Design a portable, 1-time-use hot pack and a 1-time-use cold pack for treating injuries. The pack must have 100 g of water separated from a solid chemical and be activated only when the user does something to the pack to mix the 2 components. Your job is to determine how many grams of the chemical are required to achieve the following temperatures: hot pack, 55° C (131° F); cold pack, 3° C (37° F).
Provide a proposal that includes a visual model of your design, calculations to support your proposal, and a CER that will provide an explanation behind your design
The portable hot pack design contains 100g of water and a separated chemical. When mixed, it will achieve a temperature of 55°C (131°F).
The cold pack design also contains 100g of water and a different chemical, reaching 3°C (37°F) when activated.
Hot Pack:
1. Use an exothermic reaction (e.g., calcium chloride dissolving in water).
2. Calculate the heat produced by the chemical reaction using the formula: q = mcΔT.
3. Determine the mass of the chemical needed using stoichiometry.
Cold Pack:
1. Use an endothermic reaction (e.g., ammonium nitrate dissolving in water).
2. Calculate the heat absorbed by the chemical reaction using the formula: q = mcΔT.
3. Determine the mass of the chemical needed using stoichiometry.
For both packs, use a breakable barrier to separate the water and chemical. When the user squeezes the pack, the barrier breaks, allowing the components to mix and initiate the reaction.
In conclusion, our design meets the requirements by using specific chemicals and calculated amounts to achieve the desired temperatures for treating injuries.
To know more about exothermic reaction click on below link:
https://brainly.com/question/10373907#
#SPJ11
Assume that you put the same amount of room-temperature air
in two tires. if one tire is bigger than the other, how will air
pressure in the two tires compare?
the bigger tire will have greater air pressure.
b the smaller tire will have greater air pressure.
both tires will have the same air pressure.
dnot enough information is provided to know the
answer
The larger tire will have a greater volume, but the amount of air in each tire is the same, so the pressure in both tires will be the same. The correct answer is the option: C.
The pressure of a gas is related to its temperature, volume, and the number of molecules present, according to the Ideal Gas Law: PV = nRT,
Assuming the temperature, number of molecules, and the amount of air in both tires are the same, the pressure of the air in the tires will depend only on the volume of the tires. Therefore, both tires will have the same air pressure. The correct answer is C.
To know more about Ideal Gas Law, here
brainly.com/question/13821925
#SPJ4
--The complete Question is, Assume that you put the same amount of room-temperature air in two tires. if one tire is bigger than the other, how will air pressure in the two tires compare?
A. the bigger tire will have greater air pressure.
B. the smaller tire will have greater air pressure.
C. both tires will have the same air pressure. --
Calculate the molar solubility of agbr in 2.8×10−2 m agno3 solution. the ksp of agbr is 5.0 * 10-13
The molar solubility of [tex]AgBr[/tex] in [tex]2.8 x 10^-2 M AgNO3[/tex] solution is [tex]7.1 x 10^-7 M[/tex].
To calculate the molar solubility of [tex]AgBr[/tex] in [tex]2.8 x 10^-2 M AgNO3[/tex] solution, we need to use the common ion effect. The [tex]Ag+[/tex] ion is a common ion in both [tex]AgBr and AgNO3[/tex]. When we add [tex]AgNO3[/tex] to a solution containing AgBr, it adds more [tex]Ag+[/tex] ions to the solution and causes a shift in the equilibrium to the left. The solubility of [tex]AgBr[/tex]decreases due to this effect.
The balanced equation for the dissolution of [tex]AgBr[/tex] is:
[tex]AgBr(s) ⇌ Ag+(aq) + Br-(aq)[/tex]
The Ksp expression for AgBr is:
Ksp = [Ag+][Br-] = 5.0 x 10^-13
Let x be the molar solubility of [tex]AgBr[/tex]in [tex]2.8 x 10^-2 M AgNO3[/tex]solution. Then the concentration of [tex]Ag+[/tex] ion is[tex][Ag+] = 2.8 x 10^-2 + x[/tex], and the concentration of [tex]Br-[/tex] ion is[tex][Br-] = x[/tex].
Substituting these values into the Ksp expression, we get:
[tex]Ksp = (2.8 x 10^-2 + x)(x) = 5.0 x 10^-13[/tex]
Simplifying the equation and neglecting x in comparison to [tex]2.8 x 10^-2[/tex], we get:
[tex]x^2 = 5.0 x 10^-13x = sqrt(5.0 x 10^-13) = 7.1 x 10^-7 M[/tex]
To know more about molar solubility refer to-
https://brainly.com/question/28170449
#SPJ11
A 0. 495M solution of nitrous acid, HNO2, has a pH of 1. 83
a) Find the percent ionization of nitrous acid in this solution. You may assume the temperature is 25 oC.
b) Calculate the value of Ka for nitrous acid. You may assume the temperature is 25 oC.
c) Using the value of Ka you determined in b), calculate the pH of a solution formed by adding 1. 0 g of NaNO2 to 750 mL of 0. 0125M HNO2. You may assume the temperature is 25 oC
a) The percent ionization of nitrous acid in this 0.495M solution is 2.64%.
b) The value of Ka for nitrous acid is 4.45 x 10⁻⁴.
c) The pH of the solution formed by adding 1.0g NaNO₂ to 750mL of 0.0125M HNO₂ is 2.83.
a) Percent ionization = ([tex]10^-^p^H[/tex] / initial concentration) x 100
Percent ionization = ( [tex]10^-^1^.^8^3[/tex] / 0.495) x 100 = 2.64%
b) Ka = [H⁺][NO₂⁻] / [HNO₂]
Ka = ( [tex]10^-^1^.^8^3[/tex] )² / (0.495 - [tex]10^-^1^.^8^3[/tex] ) = 4.45 x 10⁻⁴
c) 1. Calculate moles of NaNO₂: (1g / 69.0 g/mol) = 0.0145 mol
2. Calculate initial concentration of NO₂⁻: 0.0145 mol / 0.750 L = 0.0193 M
3. Use Henderson-Hasselbalch equation:
pH = pKa + log([NO₂⁻]/[HNO₂])
pH = -log(4.45 x 10⁻⁴) + log(0.0193 / 0.0125) = 2.83
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/31732200#
#SPJ11
Limiting and excess reactants (with steps pls)
1. fe2o3 + 3co --------> 2fe + 3co2
185 g of fe2o3 reacts with 3.4 mol of co. find the limiting and excess reactant and the grams of fe produced.
2. cu2o (s) + c (s) + ------> 2cu (s) + co2
when 11.5 g of c are allowed to react with 114.5 g of cu2o, how many grams of cu produced?
The limiting reactant is CO, the excess reactant is Fe₂O₃, and the grams of Fe produced is 126.8 g. when 11.5 g of c are allowed to react with 114.5 g of cu2o, then, 101.7 g of Cu is produced.
The balanced equation for the reaction is;
Fe₂O₃ + 3CO → 2Fe + 3CO₂
To determine the limiting and excess reactants, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation.
First, we need to convert the given mass of Fe₂O₃ to moles;
molar mass of Fe₂O₃ = 2(55.85 g/mol) + 3(16.00 g/mol) = 159.69 g/mol
moles of Fe₂O₃ =185 g / 159.69 g/mol
= 1.16 mol
Next, we need to convert the given number of moles of CO to grams:
molar mass of CO = 12.01 g/mol + 16.00 g/mol
= 28.01 g/mol
mass of CO = 3.4 mol x 28.01 g/mol
= 95 g
Now, we can compare the number of moles of Fe₂O₃ and CO to their stoichiometric ratio in the balanced equation;
Fe₂O₃:CO = 1:3
moles of CO needed = 3 x 1.16 mol = 3.48 mol
Since we only have 3.4 mol of CO available, CO is the limiting reactant and Fe₂O₃ is the excess reactant.
To calculate the grams of Fe produced, we need to use the amount of limiting reactant (CO) as the basis for the calculation;
moles of Fe produced = (3.4 mol CO) x (2 mol Fe / 3 mol CO)
= 2.27 mol Fe
molar mass of Fe = 55.85 g/mol
mass of Fe produced = (2.27 mol Fe) x (55.85 g/mol) = 126.8 g Fe
Therefore, the limiting reactant is CO, the excess reactant is Fe₂O₃, and the grams of Fe produced is 126.8 g.
The balanced equation for the reaction is;
Cu₂O + C → 2Cu + CO₂
To determine the grams of Cu produced, we need to first identify the limiting reactant.
First, we need to convert the given masses of C and Cu₂O to moles;
molar mass of C = 12.01 g/mol
moles of C = 11.5 g / 12.01 g/mol = 0.958 mol
molar mass of Cu₂O = 2(63.55 g/mol) + 16.00 g/mol
= 143.10 g/mol
moles of Cu₂O = 114.5 g / 143.10 g/mol
= 0.800 mol
Next, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation;
Cu₂O:C = 1:1
Since we have 0.958 mol of C and 0.800 mol of Cu₂O, Cu₂O is the limiting reactant.
To calculate the grams of Cu produced, we need to use the amount of limiting reactant (Cu₂O) as the basis for the calculation:
moles of Cu produced = (0.800 mol Cu₂O) x (2 mol Cu / 1 mol Cu₂O) = 1.60 mol Cu
molar mass of Cu = 63.55 g/mol
mass of Cu produced = (1.60 mol Cu) x (63.55 g/mol) = 101.7 g Cu
Therefore, 101.7 g of Cu is produced.
To know more about limiting reactant here
https://brainly.com/question/2948214
#SPJ4
Choosy moms choose JIF! Your mom is making PB & J sandwiches for you and her. When she looks in the cupboard, she realizes she has 3 slices of bread, 1 jar of peanut butter, and 1/2 jar of jelly. What is the limiting reactant?
In this scenario, the limiting reactant is the ingredient that will run out first and limit the number of sandwiches that can be made.
Assuming that each sandwich requires two slices of bread, one serving of peanut butter, and one serving of jelly, we can see that we have enough bread and jelly to make a maximum of 1.5 sandwiches. However, since we only have one serving of peanut butter, we can only make one sandwich.
Therefore, the peanut butter is the limiting reactant. It is important to identify the limiting reactant in chemical reactions to determine the maximum amount of product that can be formed and to avoid wasting resources.
To know more about the limiting reactant refer here :
https://brainly.com/question/14225536#
#SPJ11
Ensure the Sales worksheet is active. Enter a function in cell B8 to create a custom transaction number. The transaction number should be comprised of the item number listed in cell C8 combined with the quantity in cell D8 and the first initial of the payment type in cell E1. Use Auto Fill to copy the function down, completing the data in column B.
Enter a nested function in cell G8 that displays the word Flag if the Payment Type is Credit and the Amount is greater than or equal to $4000. Otherwise, the function will display a blank cell. Use Auto Fill to copy the function down, completing the data in column G.
Create a data validation list in cell D5 that displays Quantity, Payment Type, and Amount.
Type the Trans# 30038C in cell B5, and select Quantity from the validation list in cell D5.
Enter a nested lookup function in cell F5 that evaluates the Trans # in cell B5 as well as the Category in cell D5, and returns the results based on the data in the range C8:F32
In B8, enter the custom transaction number function: `=C8&D8&LEFT(E1,1)`. Use Auto Fill to copy it down column B.
In G8, enter the nested function: `=IF(AND(E8="Credit",F8>=4000),"Flag","")`. Auto Fill it down column G.
In D5, create a data validation list with Quantity, Payment Type, and Amount.
In B5, type Trans# 30038C. In D5, select Quantity.
In F5, enter the nested lookup function: `=IF(D5="Quantity",VLOOKUP(B5,C8:F32,2,FALSE),IF(D5="Payment Type",VLOOKUP(B5,C8:F32,3,FALSE),IF(D5="Amount",VLOOKUP(B5,C8:F32,4,FALSE),"")))`.
Follow these steps to achieve the desired result in your Sales worksheet.
To know more about nested function click on below link:
https://brainly.com/question/30186413#
#SPJ11
What is the percent dissociation of HNO2 when 0. 058 of sodium nitrate is added to 110. 0ml of a 0. 060 M HNO solution? K, for HNO2 is 4. 0x10^-4
The percent dissociation of HNO₂ comes out to be 5.2% which is shown in the below secion.
The calculations of pKa is done as follows-
pKa = - log Ka
= - log (4.0 x 10⁻⁴)
= 3.398
Mole of NaNO₂ = mass / molar mass
= 0.058 g / 68.9953 g/mole
= 8.406 x 10⁻⁴ mole
Mole of HNO₂ = 0.110 L * 0.060 mole / L = 6.6 x10⁻³ mole.
Resulting solution is buffer solution.
pH = pKa + log [salt] / [acid]
Substituting the known values in the above formula.
pH = 3.398 + log ( 8.406 x 10⁻⁴ / 6.6 x 10⁻³ )
pH = 2.503
The pH can also be evaluated using the below expression.
pH = -log[H⁺]
-log[H] = 2.503
[H⁺]= 3.14 x 10⁻³ M
Thus
Percent of ionization = 3.14 x 10⁻³ M x 100 / 0.060 = 5.2 %
To learn more about pH check the link below-
https://brainly.com/question/26424076
#SPJ4
Calculate the ph of a buffer that is 0. 225 m hc2h3o2 and 0. 162 m kc2h3o2. The ka for hc2h3o2 is 1. 8 × 10-5.
The pH of the buffer is 4.60.
To calculate the pH of a buffer, we can use the Henderson-Hasselbalch equation:
[tex]pH = pKa + log([A-]/[HA])[/tex]
where pKa is the dissociation constant of the weak acid, [tex][A-][/tex] is the concentration of the conjugate base, and [tex][HA][/tex] is the concentration of the weak acid.
In this case, the weak acid is acetic acid[tex](HC2H3O2)[/tex], the conjugate base is acetate [tex](C2H3O2-)[/tex], and the dissociation constant (Ka) is [tex]1.8 × 10^-5[/tex].
First, we need to calculate the ratio of [tex][A-]/[HA][/tex]:
[tex][A-]/[HA] = (0.162 M)/(0.225 M) = 0.72[/tex]
Next, we can substitute the values into the Henderson-Hasselbalch equation:
[tex]pH = pKa + log([A-]/[HA])\\pH = -log(1.8 × 10^-5) + log(0.72)[/tex]
pH = 4.74 + (-0.14)
pH = 4.60
Therefore, the pH of the buffer is 4.60.
To know more about pH refer to-
https://brainly.com/question/491373
#SPJ11
1. ReShayla was making pancakes and decided that she wanted hot syrup on her pancakes.
As she poured the syrup into a bowl, it came out slowly. After she heated it in the
microwave for a few seconds, she poured the syrup onto her pancakes and it came out
quickly. Why did the syrup come out quicker after she warmed it up?
a. Its surface tension decreased because the radiation from the microwave broke the
intermolecular forces it had.
b. The radiation from the microwave increased its viscosity by breaking the syrup's
intermolecular forces.
c. Its surface tension increased because the radiation from the microwave broke the
intermolecular forces it had.
d. The radiation from the microwave decreased its viscosity by breaking the syrup's
intermolecular forces.
The answer is (d) The radiation from the microwave decreased its viscosity by breaking the syrup's intermolecular forces.
When the syrup is heated in the microwave, the thermal energy from the microwaves increases the kinetic energy of the molecules in the syrup. This increased kinetic energy causes the molecules to move more quickly, leading to a decrease in the syrup's viscosity.
As the viscosity decreases, the syrup flows more easily, allowing it to pour more quickly. The intermolecular forces between the molecules of the syrup are weakened due to the increased kinetic energy, leading to a decrease in the viscosity of the syrup. Thus, option (d) is the correct answer.
To learn more about surface tension, here
https://brainly.com/question/11348644
#SPJ4
What is the in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?
The pressure of the [tex]Co_{2}[/tex] gas in the 12.2 L vessel at a temperature of 42°C with 1.13 mol of CO2 is 2.12 atm.
The volume of the vessel = 12.2 L
Number of moles of [tex]Co_{2}[/tex] = 1. 13 mol
Temperature = 42 degrees
To calculate the pressure of the gas we need to use the ideal gas law equation.
PV = nRT
P = nRT/V
Assuming that the Universal gas constant R = 0.0821 L·atm/(mol·K).
Converting the temperature degrees into Kelvin scale
T = 42°C + 273.15 = 315.15 K
Substituting the above values into the equation:
P = [(1.13 mol) * (0.0821 L·atm/mol·K)* (315.15 K)] / (12.2 L) = 2.12 atm
Therefore, we can conclude that the pressure of the gas is 2.12 atm.
To learn more about Pressure
https://brainly.com/question/25764275
#SPJ4
The complete question is:
What is the pressure required in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?
What is the atomic theory of matter?
The atomic theory of matter states that all matter, whether an element, a compound or a mixture is composed of small particles called atoms.
What is atomic theory?The atomic theory is any of the several theories that explain the structure of the atom, and of subatomic particles.
The atomic theory of matter, first postulated by John Dalton, seeks to explain the nature of matter-the materials of which the Universe, all galaxies, solar systems and Earth are formed.
The components of the atomic theory are as follows;
All matter is made of very tiny particles called atoms.Atoms are indivisible particles, which cannot be created or destroyed in a chemical reactionAtoms of a given element are identical in mass and chemical propertiesAtoms of different elements have different masses and chemical propertiesAtoms combine in the ratio of small whole numbers to form compoundsThe relative number and kinds of atoms are constant in a given compoundLearn more about atomic theory at: https://brainly.com/question/28853813
#SPJ1
The acid dissociation constant (Ka) for benzoic acid is 6. 3 × 10 ^-5. Find the pH of a 0. 35 m solution of benzoic acid.
The equation for the dissociation of benzoic acid is:
C6H5COOH + H2O ↔ C6H5COO- + H3O+
The expression for Ka is:
Ka = [C6H5COO-][H3O+] / [C6H5COOH]
At equilibrium, the concentration of undissociated benzoic acid will be (0.35 - x), where x is the concentration of dissociated benzoic acid.
Assuming x is small compared to 0.35, we can make the approximation that the concentration of undissociated benzoic acid is 0.35. Therefore, we can write:
Ka = x^2 / (0.35 - x)
Solving for x, we get:
x = √(Ka × (0.35 - x))
x = √(6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x)
Squaring both sides:
x^2 = 6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x
Bringing all the x terms to one side:
x^2 + 6.3 × 10^-5 × x - 6.3 × 10^-5 × 0.35 = 0
Using the quadratic formula:
x = [-6.3 × 10^-5 ± √(6.3 × 10^-5)^2 + 4 × 6.3 × 10^-5 × 0.35] / 2
x = [-6.3 × 10^-5 ± 1.37 × 10^-3] / 2
x = 6.46 × 10^-4 or x = -7.03 × 10^-5
Since the concentration of benzoic acid cannot be negative, we choose the positive root:
x = 6.46 × 10^-4
The concentration of H3O+ ions is equal to x, so the pH of the solution is:
pH = -log[H3O+]
pH = -log(6.46 × 10^-4)
pH = 3.19
Therefore, the pH of a 0.35 m solution of benzoic acid is 3.19.
To know more about dissociation refer here
https://brainly.com/question/28330679#
#SPJ11
The electron configuration for the element bismuth, (Bi, atomic #83) is: ? 1s22s22p63s23p64s24d104p65s25d105p66s26d106p3 ? 1s22s22p63s23p64s23d104p65s24d105p66s24f145d106p3 ? 1s22s22p63s23p64s23d104p65s24d105p66s25d106p3 ? 1s22s22p63s23p64s24d104p65s25d105p66s26f146d106p3
The correct electron configuration for bismuth is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 6s² 4f¹⁴ 5d¹⁰ 6p³. Option 2.
Electron configuration of elementsBismuth has an atomic number of 83, and hence, has 83 electrons.
According to the Aufbau principle, electrons fill up orbitals in order of increasing energy levels; s, p, d, and f with a maximum electron of 2, 6, 10, and 14 respectively.
The electron configuration for bismuth can be written by following this principle, starting from the first energy level and moving up to the sixth energy level.
Therefore, the electron configuration for bismuth is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 6s² 4f¹⁴ 5d¹⁰ 6p³.
More on electron configurations can be found here: https://brainly.com/question/29757010
#SPJ1
Consider a gas cylinder containing 0. 100 moles of an ideal gas in a
volume of 1. 00 L with a pressure of 1. 00 atm. The cylinder is
surrounded by a constant temperature bath at 298. 0 K. With an
external pressure of 5. 00 atm, the cylinder is compressed to 0. 500 L.
Calculate the q(gas) in J for this compression process.
According to the question the q(gas) in J for this compression process is 0J.
What is gas ?Gas is a state of matter in which particles are spread out and have enough energy to move around freely. Gas is composed of molecules in constant motion and takes the shape and volume of its container. Gas can be either naturally occurring or man-made and is found in the atmosphere. Examples of naturally occurring gases include oxygen, nitrogen, and carbon dioxide. Man-made gases include helium, chlorine, and hydrogen. Gas is often used as a source of energy and is burned to produce heat, which can be used to power machines and vehicles. Gas is also used in many industries, such as in the production of chemicals and plastics.
In this case, n = 0.100 moles,
[tex]C_v[/tex] = (3/2)R = (3/2)(8.314 J/mol K) = 12.471 J/mol K, and
T₁ = 298.0 K,
T2 = 298.0 K.
Therefore, q(gas)
= nCv (T₂- T₁)
= 0.100 mol × 12.471 J/mol K × (298.0 K - 298.0 K)
= 0 J.
To learn more about gas
https://brainly.com/question/25736513
#SPJ4
If a student starts with 300. 0 mL of a gas at 17. 0 °C, what would be its volume at 35. 0°C?
The volume of the gas at 35.0°C would be approximately 324.7 mL, assuming a constant pressure of 1 atm.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula :
[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]
We can assume that the pressure is constant since it is not mentioned in the problem. Also, we need to convert the temperatures to Kelvin by adding 273.15 to each Celsius temperature.
Using the formula and the given values, we get:
[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]
[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷[tex](T_1 * P_2)[/tex]
We can plug in the values:
[tex]P_1 = unknown\\V_1 = 300.0 mL \\T_1 = 17.0 + 273.15 = 290.15 K \\P_2 = unknown \\T_2 = 35.0 + 273.15 = 308.15 K[/tex]
Now, we need to assume a pressure value. Let's assume the pressure is constant at 1 atmosphere (atm). We can now solve for [tex]V_2[/tex]:
[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷ [tex](T_1 * P_2)[/tex]
[tex]V_2 = (1 atm * 300.0 mL * 308.15 K)[/tex] ÷ [tex](290.15 K * 1 atm)[/tex]
[tex]V_2 = 324.7 mL[/tex]
To know more about combined gas law, here
brainly.com/question/30458409
#SPJ1
Nicolaas' model demonstrates that and are primarily responsible for the movement of water on earth
Nicolaas' model is a scientific model that explains the movement of water on Earth. According to the model, the two primary factors responsible for the movement of water on Earth are evaporation and precipitation.
Evaporation occurs when water changes from a liquid to a gas state due to heat from the sun. This process results in the formation of water vapor that rises into the atmosphere. Precipitation occurs when water vapor condenses in the atmosphere and falls back to the surface as rain, snow, or hail. These two processes play a critical role in the water cycle, which is essential for the survival of life on Earth. Therefore, Nicolaas' model highlights the significance of evaporation and precipitation in the movement of water on Earth.
Learn more about Nicolaas' model at https://brainly.com/question/15923461
#SPJ11
An empty 150 milliliter beaker has a mass of 45 grams. When 100 milliliters of oil is added to the beaker, the total mass is 100 grams. The density of the oil is …
The density of oil is 0.55 g/mL
To determine the density of the oil, first calculate the mass of the oil alone by subtracting the mass of the empty beaker from the total mass: 100 grams (total mass) - 45 grams (empty beaker mass) = 55 grams (mass of oil).
Now, use the formula for density, which is:
Density = Mass / Volume
In this case:
Density of oil = 55 grams (mass of oil) / 100 milliliters (volume of oil) = 0.55 g/mL.
So, the density of the oil is 0.55 g/mL.
To know more about density:
https://brainly.com/question/1354972
#SPJ11
A solution of sodium hydroxide was prepared by dissolving 0. 93g of sodium oxide in
75. 0 cm3 of water. Aqueous hydrochloric acid was prepared at room temperature and pressure by dissolving 240. 0 cm3 of hydrogen chloride gas in 100. 0 cm3 of water.
a. Calculate the molar concentration and mass concentration of;
(i) sodium hydroxide
(ii) hydrochloric acid
(i) To calculate the molar concentration of sodium hydroxide, we first need to calculate the number of moles of sodium hydroxide in the solution. The molar mass of NaOH is 40.0 g/mol.
Number of moles of NaOH = Mass of NaOH / Molar mass of NaOH
= 0.93 g / 40.0 g/mol
= 0.02325 mol
Volume of solution = 75.0 cm³ = 0.075 L
Molar concentration of NaOH = Number of moles of NaOH / Volume of solution
= 0.02325 mol / 0.075 L
= 0.31 M
Mass concentration of NaOH = Mass of NaOH / Volume of solution
= 0.93 g / 0.075 L
= 12.4 g/L
(ii) To calculate the molar concentration of hydrochloric acid, we first need to calculate the number of moles of HCl in the solution. The molar mass of HCl is 36.5 g/mol.
Number of moles of HCl = (Volume of HCl gas x Density of HCl gas) / Molar mass of HCl
= (240.0 cm³ x 1.639 g/L) / 36.5 g/mol
= 10.75 mol
Volume of solution = 100.0 cm³ = 0.100 L
Molar concentration of HCl = Number of moles of HCl / Volume of solution
= 10.75 mol / 0.100 L
= 108 M
Mass concentration of HCl = (Molar concentration of HCl x Molar mass of HCl) / Density of solution
= (108 mol/L x 36.5 g/mol) / 1.00 g/cm³
= 3942 g/L
To know more about concentration refer to-
https://brainly.com/question/15532279
#SPJ11