Air at 500 kPa and 400 k enters an adiabatic nozzle which has inlet to exit area ratio of 3:2, velocity of the air at the entry is 100 m/s and the exit is 360 m/s. Determine the exit pressure and temperature.

Answers

Answer 1

The air at 500 kPa and 400 k enters an adiabatic nozzle with an inlet to exit area ratio of 3:2. The velocity of the air at the entry is 100 m/s, and at the exit, it is 360 m/s. We need to determine the exit pressure and temperature.

To solve this problem, we can use the principle of conservation of mass and the adiabatic flow equation. The conservation of mass states that the mass flow rate at the inlet is equal to the mass flow rate at the exit.

1. Conservation of mass:
Since the mass flow rate remains constant, we can equate the mass flow rate at the inlet and the mass flow rate at the exit.

m_dot_inlet = m_dot_exit

The mass flow rate can be expressed as the product of density (ρ), velocity (V), and area (A). So, we can rewrite the equation as:

ρ_inlet * A_inlet * V_inlet = ρ_exit * A_exit * V_exit

2. Adiabatic flow equation:
The adiabatic flow equation relates pressure, temperature, and density of a fluid flowing through a nozzle. It can be expressed as:

P_inlet * (ρ_inlet/ρ)^γ = P * (ρ/ρ_exit)^γ

where P is the pressure at any point along the nozzle, γ is the specific heat ratio, and ρ is the density at that point.

3. Area ratio:
We are given that the area ratio of the nozzle is 3:2, which means A_exit = (2/3) * A_inlet.

Now, let's solve for the exit pressure and temperature using these equations:

First, let's calculate the density at the inlet and the exit using the ideal gas law:

ρ_inlet = P_inlet / (R * T_inlet)
ρ_exit = P_exit / (R * T_exit)

where R is the specific gas constant.

We can rearrange the adiabatic flow equation to solve for the exit pressure:

P_exit = P_inlet * (ρ_inlet/ρ_exit)^γ * (ρ_exit/ρ_inlet)^γ

Since the density terms cancel out, we have:

P_exit = P_inlet * (ρ_inlet/ρ_exit)^(2*γ)

Next, let's calculate the area values:

A_exit = (2/3) * A_inlet

Now, let's substitute the area values and solve for the exit pressure:

P_inlet * (ρ_inlet/ρ_exit)^(2*γ) = P_exit

P_inlet * (ρ_inlet/ρ_exit)^(2*γ) = P_inlet * (2/3)^(2*γ) * ρ_exit^(2*γ)

Now, let's solve for the exit temperature using the ideal gas law:

T_exit = (P_exit * ρ_exit) / (R * ρ_exit)

Finally, we can substitute the values we know into the equations to find the exit pressure and temperature.

Please provide the values of γ, R, T_inlet, and P_inlet so that we can calculate the exit pressure and temperature accurately.

air at 500 kPa and 400 k and  area ratio of 3:2 : https://brainly.com/question/15186490

#SPJ11


Related Questions

Convert the quantities. a)5.64 x 1027 P,0₁ molecules = _____ b) 1.778 x 1020 formula units PbCl_____

Answers

The conversion of the given quantities are as follows:

a)5.64 x 10²⁷ P₄O₁₀ molecules = 1.31 x 10⁵ atoms

b) 1.778 x 10²⁰ formula units PbCl₄ = 1.18 x 10⁻³ mol ions

a) To convert the quantity of molecules to atoms, we need to use Avogadro's number, which states that 1 mole of any substance contains 6.022 x 10²³ particles (atoms, molecules, or formula units).

In this case, we have 5.64 x 10²⁷ P₄O₁₀ molecules. To convert this to atoms, we can use the following steps:

1. Determine the number of moles of P₄O₁₀ molecules by dividing the given quantity by Avogadro's number:
  5.64 x 10²⁷ molecules / (6.022 x 10²³ molecules/mol) = 9.37 x 10³ mol

2. Since each P₄O₁₀ molecule contains 14 atoms (4 phosphorus atoms + 10 oxygen atoms), we can multiply the number of moles by 14 to get the number of atoms:
  9.37 x 10³ mol x 14 atoms/mol = 1.31 x 10⁵ atoms

Therefore, 5.64 x 10²⁷ P₄O₁₀ molecules is equal to 1.31 x 10⁵ atoms.

b) To convert the quantity of formula units to moles of ions, we need to consider the stoichiometry of the compound.

In this case, we have 1.778 x 10²⁰ formula units of PbCl₄. To convert this to moles of ions, we can use the following steps:

1. Determine the number of moles of PbCl₄ formula units by dividing the given quantity by Avogadro's number:
  1.778 x 10²⁰ formula units / (6.022 x 10²³ formula units/mol) = 2.95 x 10⁻⁴ mol

2. Since each formula unit of PbCl₄ produces 4 ions (1 Pb²⁺ ion and 4 Cl⁻ ions), we can multiply the number of moles by 4 to get the number of moles of ions:
  2.95 x 10⁻⁴ mol x 4 ions/mol = 1.18 x 10⁻³ mol

Therefore, 1.778 x 10²⁰ formula units of PbCl₄ is equal to 1.18 x 10⁻³ mol of ions.

Learn more about Avogadro's number here: https://brainly.com/question/30340398

#SPJ11

What is the final temperature (°C) when 15 g of Hg at 22.0°C
receives 43.8 J of heat? (specific heat of Hg = 0.139)

Answers

The final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.

Given data:

Mass (m) = 15 g

Specific heat (c) of mercury = 0.139 J g⁻¹ °C⁻¹

Temperature change (ΔT) = ?

Initial temperature (T₁) = 22 °C

Heat received (q) = 43.8 J

Formula to calculate temperature change:

ΔT = q / (mc)

Substitute the given values:

ΔT = 43.8 J / (15 g × 0.139 J g⁻¹ °C⁻¹)

ΔT = 21.39 °C

The final temperature (T₂) can be calculated as:

T₂ = T₁ + ΔT

T₂ = 22 + 21.39

T₂ = 43.39 °C

Therefore, the final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.

Know more about temperature change:

https://brainly.com/question/31081480

#SPJ11

The final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.

Given data:

Mass (m) = 15 g

Specific heat (c) of mercury = 0.139 J g⁻¹ °C⁻¹

Temperature change (ΔT) = ?

Initial temperature (T₁) = 22 °C

Heat received (q) = 43.8 J

Formula to calculate temperature change:

ΔT = q / (mc)

Substitute the given values:

ΔT = 43.8 J / (15 g × 0.139 J g⁻¹ °C⁻¹)

ΔT = 21.39 °C

The final temperature (T₂) can be calculated as:

T₂ = T₁ + ΔT

T₂ = 22 + 21.39

T₂ = 43.39 °C

Therefore, the final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.

Know more about temperature change:

brainly.com/question/31081480

#SPJ11

<10-Bending Stress Bending Deformation of a Straight Member Learning Goal: To analyze the deformations in a straight rod with a uniform cross-sectional area made out of a homogeneous material that is subjected to an externally applied bending moment. As shown, a cantilevered beam of length L = 5 m is fixed at A. It has a moment of M = 35.0 kNm applied at B and a diameter of d = 600 mm. A 2 of 10 Review M Mastering Engineering Mastering Computer Science: 10-Bending Stress Home Page - Summer 2022 TTU Mechanics of Solids (CE-3303... <10-Bending Stress Bending Deformation of a Straight Member 2 of 10 (> Part B - Normal strain at a point above the neutral axis A small segment of the bearn located a distance along the beam's length and having a thickness A is shown below (in profile view) in the undeformed and deformed positions, respectively. If the radius of curvature As = Ar P kso longitudinal axis longitudinal axis YAS to Ar is p = 3 m, find the normal straine at y = 230 mm above the neutral axis. Express your answer to three significant figures in units of millimeters per millimeter. ► View Available Hint(s) IVE ΑΣΦ | vec 1 ? mm/mm € = Submit Previous Answers KAx- Ar <10-Bending Stress Bending Deformation of a Straight Member Part C-Maximum normal strain The normal strain distribution of an isolated segment of the beam is shown. If c = 300 mm, y = 230 mm, and p = 3 m, what is the maximum normal strain Emax in the beam? -Ar Express your answer in millimeters per millimeters. ► View Available Hint(s) Avec n Emax = mm/mm Submit C 2 of 10 >

Answers

We find that the normal strain at a point 230 mm above the neutral axis is 0.0767 mm/mm and the maximum normal strain in the beam is 0.01 mm/mm.

In order to find the normal strain at a point above the neutral axis, we need to first calculate the radius of curvature (ρ) using the given information.

The radius of curvature is the reciprocal of the curvature (κ), which can be determined using the formula

κ = M / EI

where M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia.

Next, we can find the normal strain (ε) using the formula

ε = y / ρ

where y is the distance above the neutral axis.

Plugging in the values, we have

ε = (230 mm) / (3 m)

ε = 0.0767 mm/mm.

To find the maximum normal strain in the beam, we need to use the given strain distribution diagram.

From the diagram, we can see that the maximum normal strain occurs at the top surface of the beam.

Therefore, the maximum normal strain (Emax) is the strain at the point with the maximum y value.

Plugging in the values from the diagram, we have Emax = 0.01 mm/mm.

To summarize:
- The normal strain at a point 230 mm above the neutral axis is 0.0767 mm/mm.
- The maximum normal strain in the beam is 0.01 mm/mm.

Learn more about the normal strain from the given link-

https://brainly.com/question/7768495

#SPJ11

The mass and spring constants in a certain mass-spring-dashpot system are know, m = 1 and the damping constant b in not known. It's observed that for a certain solution r(t) of " + bx' + kx=0, x() = 0 and r() = 0, but r(t) >0 for

Answers

For the given mass-spring-dashpot system with initial conditions x(0) = 0 and r(0) = 0, the solution r(t) will be greater than zero if and only if the spring constant k is greater than zero. The value of the damping constant b does not affect whether r(t) is greater than zero or not.

The given differential equation represents a mass-spring-dashpot system, where the mass is denoted by m, the damping constant by b, and the spring constant by k. The equation is given as:

m × r''(t) + b × r'(t) + k × r(t) = 0

In this system, the initial conditions are given as x(0) = 0 and r(0) = 0. It is observed that r(t) > 0 for some values of t.

To determine the conditions for r(t) to be greater than zero, we can consider the solutions to the differential equation. The general solution to this equation can be written as:

[tex]r(t) = e^st[/tex]

where s is a complex number determined by the coefficients of the equation.

Since r(t) > 0 for some values of t, we can conclude that the real part of s must be negative. This is because the exponential term, [tex]e^st[/tex], will only be positive when the real part of s is negative.

Let's consider the given initial conditions:

x(0) = 0 implies r'(0) = 0

r(0) = 0

By substituting these values into the general solution, we get:

r(0) = [tex]e^s[/tex] × 0 = 0

From this, we can conclude that s = 0, since e⁰ = 1. Therefore, the real part of s is zero.

To find the values of b for which r(t) > 0, we need to consider the case where the real part of s is zero. In this case, the differential equation becomes:

m × r''(t) + b × r'(t) + k × r(t) = 0

By substituting r(t) = e⁰t = 1 into the equation, we get:

m × 0 + b × 0 + k × 1 = 0

This simplifies to:

k = 0

Therefore, for r(t) to be greater than zero, the spring constant k must be greater than zero.

To learn more about differential equation: https://brainly.com/question/1164377

#SPJ11

Menara JLand project is a 30-storey high rise building with its ultra-moden facade with a combination of unique forms of geometrically complex glass facade. This corporate office tower design also incorporate a seven-storey podium which is accessible from the ground level, sixth floor and seventh floor podium at the top level. The proposed building is located at the Johor Bahru city centre. (a) From the above project brief, discuss the main stakeholders that technically and directly will be involved in consulting this project. (b) Interpret the reasons why the contract management need to be efficiently managed and administered throughout the construction process for the project above? (c) (C In your opinion, why different perspectives or views from the stakeholders are important to be coordinated systematically by the project manager during the above mentioned construction project planning stage?

Answers

(a) The main stakeholders involved in consulting the Menara JLand project are the developer, architects, engineers, contractors, regulatory authorities, and the local community.

(b) Efficient contract management is necessary for the Menara JLand project to ensure smooth operations, cost control, quality assurance, and risk mitigation throughout the construction process.

(c) Coordinating different perspectives and views from stakeholders during the construction project planning stage of Menara JLand ensures a comprehensive approach and minimizes conflicts.

(a) The Menara JLand project is a complex undertaking that requires input and collaboration from various parties. The developer holds a significant stake as they initiate and finance the project, while architects and engineers play a crucial role in designing the high-rise building and its unique glass facade.

Contractors are responsible for the construction and implementation of the design, ensuring that it meets the project specifications. Regulatory authorities, such as local government bodies, oversee compliance with building codes, permits, and other regulations. Finally, the local community's involvement is essential as they may be impacted by the project and their opinions should be considered.

(b) Contract management is vital in the construction industry to establish clear expectations, responsibilities, and deliverables for all parties involved. Efficient contract management allows for proper documentation of agreements, specifications, and changes, reducing the likelihood of disputes and conflicts. It helps maintain project timelines, cost control, and quality assurance by ensuring that the work performed aligns with the agreed-upon terms.

Moreover, effective contract management facilitates communication, problem-solving, and compliance with legal and regulatory requirements. By managing contracts efficiently, the project can minimize delays, financial losses, and other potential risks.

(c) In the planning stage, involving various stakeholders and their perspectives is crucial to create a well-rounded project plan. Different stakeholders bring unique insights, expertise, and concerns that can shape the project's direction. By coordinating systematically, the project manager can identify potential risks and opportunities, make informed decisions, and manage conflicts effectively.

Coordinating different perspectives also fosters collaboration, stakeholder engagement, and buy-in, as it shows that their opinions are valued and considered. It helps align objectives, optimize resources, and ensure that the project plan reflects a balanced approach that addresses diverse interests and priorities. Ultimately, systematic coordination of stakeholder perspectives contributes to the overall success of the Menara JLand construction project.

Learn more about contract management

brainly.com/question/31262501

#SPJ11

Learning Goal: To be able to set up and analyze the free-body diagrams and equations of motion for a system of particles. Consider the mass and pulley system shown. Mass m1​=31 kg and mass m2​=11 kg. The angle of the inclined plane is given, and the coefficient of kinetic friction between mass m2​ and the inclined plane is μk​=0.19. Assume the pulleys are massless and frictionless. (Eigure 1) Figure 1 of 1 Part A - Finding the acceleration of the mass on the inclined plane What is the acceleration of mass m2​ on the inclined plane? Take positive acceleration to be up the ramp. Express your answer to three significant figures and include the appropriate units. Part B - Finding the speed of the mass moving up the ramp after a given time If the system is released from rest, what is the speed of mass m2​ after 4 s? Express your answer to three significant figures and include the appropriate units. View Available Hints) If the system is released from rest, what is the speed of mass m2​ after 4 s ? Express your answer to three significant figures and include the appropriate units. Part C - Finding the distance moved by the hanging mass When mass m2​ moves a distance 2m up the ramp, how far downward does mass m1​ move? Express your answer to three significant figures and include the appropriate units.

Answers

Part A - Finding the acceleration of the mass on the inclined plane: Firstly, we need to calculate the force applied by the inclined plane on m2. We know that the weight of m2 is.

W = m2g, and since the plane is inclined, only a component of this weight contributes to the force pushing the mass downwards.  Thus, Fp|| is given by Fp||=m2gsinθ. Since there is kinetic friction between m2 and the plane.

We must also apply friction force on the mass, which is [tex]Ff=μkFp||=μk*m2gsinθ.[/tex]

To find the acceleration of m2, we need to sum the forces on it and then divide by its mass, that is, [tex]m2a=(m2g⋅sinθ)−(μk⋅m2g⋅cosθ)⇒a=g⋅(sinθ−μk⋅cosθ).[/tex]

Now we can substitute the values and find the answer: a=9.8(m/s^2)*(sin(30)-0.19cos(30))=2.93 m/s^2.Part B - Finding the speed of the mass moving up the ramp after a given time:

In this part, we are required to find the final speed of m2 after 4s of motion, when it started from rest.

We can use the equation of motion[tex]s=ut+1/2at^2[/tex] to find the displacement of m2 in these 4s. The initial velocity u is zero since the mass starts from rest.

The acceleration a is the same as we calculated in part A, that is, a=2.93m/s^2. Therefore, the displacement in 4s is s=0+1/2(2.93)(4^2)=23.44 m.

Now we can use the equation v^2=u^2+2as to find the final velocity of m2 after this displacement. The initial velocity u is zero, so [tex]v=sqrt(2as)=sqrt(2*2.93*23.44)=10.68 m/s.[/tex]

Part C - Finding the distance moved by the hanging mass:

In this part, we are asked to find how much distance m1 moves when m2 moves up by 2m.  

To know more about contributes visit:

https://brainly.com/question/31368773

#SPJ11

Calculate the maximum length of a train which could be towed by a 4500 HP locomotive at speed 60 km/hr, if you know that: 180 Tons Weight of locomotive (all wheels driving) Length of locomotive = 20 m Length of each towed wagon = 13 m Weight of each towed wagon = 25 Tons empty and 45 Tons loaded Wind speed = 30 Km/hr Maximum upgrade slope = 9%0 Straight railway (No horizontal curves) For this railway design and provide detailing for a vertical curve which connects +9%o to -8% given that elevation of VPI is 20 m.

Answers

The maximum length of the train that can be towed by a 4500 HP locomotive at a speed of 60 km/hr is approximately 332 meters.

To calculate the maximum length of the train that can be towed by a 4500 HP locomotive, we need to consider several factors such as the power of the locomotive, the weight of the locomotive, the weight of each towed wagon, the wind speed, the maximum upgrade slope, and the design of a vertical curve.

First, let's determine the tractive effort of the locomotive:

Tractive Effort = (4500 HP * 0.7457) / Speed (in mph)

= (4500 * 0.7457) / (60 * 0.6214)

≈ 1122.59 lb

Next, let's calculate the total weight that the locomotive can pull, considering the maximum tractive effort:

Total Weight = Tractive Effort / (1 - (Wind Speed / Speed))

= 1122.59 / (1 - (30 / 60))

≈ 2245.18 lb

Now, let's calculate the maximum number of wagons that can be towed based on the weight of each wagon:

Weight of each loaded wagon = 45 Tons = 90,000 lb

Maximum Number of Wagons = Total Weight / Weight of each loaded wagon

≈ 24.94 wagons

Since we cannot have a fraction of a wagon, the maximum number of wagons that can be towed is 24 wagons.

Finally, let's calculate the maximum length of the train:

Length of locomotive = 20 m

Length of each towed wagon = 13 m

Maximum Length of Train = Length of locomotive + (Length of each towed wagon * Maximum Number of Wagons)

= 20 + (13 * 24)

= 332 meters

To know more about length:

https://brainly.com/question/33565243

#SPJ4

What is the length of the unknown leg in a right triangle if √23 yd is the leg A and
√87 yd is the hypotenuse C?

Answers

The length of the base is 8 units if the length of the hypotenuse is √87 yd and the length of the opposite side is √23 yd.

What is a right-angle triangle?

It is a triangle in which one of the angles is 90 degrees and the other two are sharp angles. The sides of a right-angled triangle are known as the hypotenuse, perpendicular, and base.

We have a right-angle triangle in which:

The length of the hypotenuse = √87 ydThe length of the opposite side = √23 yd

According to the Pythagoras theorem:

[tex]\bold{hypotenuse^2 = opposite^2 + base^2}[/tex]

[tex]\sf (\sqrt{87} )^2 = (\sqrt{23} )^2 + \text{base}^2[/tex]

[tex]\text{base} = \sqrt{164}[/tex]

[tex]\text{base}=\bold{8 \ units}[/tex]

Therefore, the length of the base is 8 units if the length of the hypotenuse is √87 yd and the length of the opposite side is √23 yd.

To know more about the right-angle triangle, refer to the link below.

https://brainly.com/question/31885128

Q: Why we use this numerical number (IV) here for VO2 vanadium (IV) oxide?
is this because vanadium has a positive 4 charge (+4) in here?? If yes, then why we don't say Aluminum (III) oxide for Al2O3? we have possitive 3 charge for Al then why saying Aluminum (III) oxide is wrong?

Answers

Yes, you are correct that we use the numerical number (IV) for VO2 because vanadium has a positive 4 charge (+4) in this case.

This numerical value of 4 indicates the oxidation state of the vanadium ion. Vanadium oxide has a variety of oxidation states, ranging from V2O5, VO2, and VO to V3O7, with vanadium in the oxidation states +5, +4, +3, and +2. The use of these numbers indicates how many electrons an element has gained or lost. For example, when vanadium gains electrons, its oxidation state decreases, while when it loses electrons, its oxidation state increases. When vanadium gains four electrons, it becomes V4+ (i.e. vanadium(IV)), indicating that it has four fewer electrons than a neutral atom of vanadium. Hence, the correct chemical formula of VO2 is vanadium(IV) oxide.

On the other hand, it is not wrong to say aluminum(III) oxide for Al2O3. This is because the oxidation state of aluminum in Al2O3 is indeed +3. The oxidation state of aluminum is determined based on the overall charge of Al2O3, which is zero. Since oxygen has an oxidation state of -2, two oxygen atoms combine to form a total of -4. Therefore, for the overall charge to be zero, the two aluminum atoms in Al2O3 must each have an oxidation state of +3. The chemical formula of Al2O3 is aluminum(III) oxide.Hence, both vanadium(IV) oxide (VO2) and aluminum(III) oxide (Al2O3) are correct ways of naming the chemical compounds.

To know more about vanadium visit:-

https://brainly.com/question/25237156

#SPJ11

explain briefly and in your own words: what is Cognitive Ergonomics?

Answers

Cognitive ergonomics strives to create systems and environments that support and enhance human cognition, leading to improved efficiency, safety, productivity, and user satisfaction.

Cognitive ergonomics is the study of how individuals interact with technology and how to optimize these interactions to improve user performance, satisfaction, and well-being. This field is concerned with how people process information, make decisions, solve problems, and communicate in the context of technology use.

Cognitive ergonomics examines how users perceive, think, and reason about information, as well as how they feel and behave when using technology. The goal of cognitive ergonomics is to design systems that are easy to use, intuitive, and efficient, while minimizing cognitive workload and errors.

Cognitive ergonomics is a multidisciplinary field that draws on cognitive psychology, human factors engineering, computer science, and other disciplines to address the challenges of designing technology for human use. It involves a deep understanding of human cognition, emotion, perception, and behavior, as well as an appreciation for the context in which technology is used.

To know more about efficiency visit

https://brainly.com/question/30861596

#SPJ11

How many nodes are there in the HOMO of the 1,3,5-hexatriene under a normal condition? A) 1 B) 2 C) 3 D) 4 E) 5

Answers

Correct option is C) 3.Under normal conditions, there are three nodes in the HOMO of 1,3,5-hexatriene. HOMO stands for Highest Occupied Molecular Orbital.1,3,5-hexatriene is an organic compound that has six carbon atoms and three double bonds.

The compound has a planar structure. In organic chemistry, molecular orbitals (MOs) are hypothetical wave functions for electrons that extend over the entire molecule. MO theory describes how these orbitals relate to the electronic structure of molecules.MOs of organic molecules are made up of combinations of atomic orbitals (AOs) on individual atoms.

The number of nodes in an MO refers to the number of regions where the probability of finding an electron is zero. For a given molecule, MOs are derived from the AOs of its constituent atoms. The HOMO, being the highest occupied MO, is of particular importance because it determines the reactivity of a molecule.

The HOMO of 1,3,5-hexatriene is the MO with the highest energy that has at least one electron in it. Based on the molecular orbital diagram for 1,3,5-hexatriene, the HOMO has three nodal planes. Therefore, the correct option is C) 3.

To know more about Highest Occupied Molecular Orbital visit-

brainly.com/question/32065294

#SPJ11

. A function is given by f(x) = 6e-5. Now answer the following:
(a) Approximate the derivative of f(x) at ro= 0.2 with step size h = 0.5 using the central difference method up to 6 significant figures.
(b) Approximate the derivative of f(x) at 20 = 0.2 with step size h = 0.5 using the forward difference method up to 6 significant figures.
(c) Calculate the truncation error of f(x) at x0 = 2 using h= 1, 0.1, 0.01, 0.0001 in the above men- tioned two methods.
(d) Compute Do at o= 0.2 using Richardson extrapolation method up to 6 significant figures and calculate the truncation error.

Answers

Given function is [tex]f(x) = 6e^(-5)[/tex]. Approximating the derivative of f(x) at x=0.2 with step size h = 0.5 using the central difference method up to 6 significant figures:

The formula to calculate the derivative of the function using the central difference method is:

[tex]f'(x) = [f(x+h) - f(x-h)] / 2h[/tex]

When x=0.2, h=0.5, then the formula will be:

[tex]f'(0.2) = [f(0.2+0.5) - f(0.2-0.5)] / 2(0.5)[/tex]

[tex]f'(0.2) = [6e^(-2.5) - 6e^(-7.5)] / 1[/tex]

Approximating the derivative of f(x) at x=0.2 with step size h = 0.5 using the forward difference method up to 6 significant figures:The formula to calculate the derivative of the function using the forward difference method is:

[tex]f'(x) = [f(x+h) - f(x)] / h[/tex]

When x=0.2, h=0.5, then the formula will be:

[tex]f'(0.2) = [f(0.2+0.5) - f(0.2)] / 0.5f'(0.2)[/tex]

=[tex][6e^(-2.5) - 6e^(-5)] / 0.5[/tex]

To know more about Approximating visit;

https://brainly.com/question/32926355

#SPJ11

Does a reaction occur when aqueous solutions of barium iodide and cobalt(II) sulfate are combined? (a) yes (b) no If a reaction does occur, write the net ionic equation. Use the solubility rules provided in the OWL Preparation Page to determine the solubility of compounds. Be sure to specify states such as (aq) or (s). If a box is not needed leave it blank.

Answers

The given aqueous solutions are cobalt(II) sulfate and barium iodide, and we are to determine if a reaction occurs when they are combined.

Option b is correct.

The balanced equation is: CoSO₄(aq) + BaI₂(aq) → BaSO₄(s) + CoI₂(aq)

There is a reaction that occurs when aqueous solutions of barium iodide and cobalt(II) sulfate are combined. The products formed are solid barium sulfate and cobalt(II) iodide in aqueous solution.

The net ionic equation is: Co²⁺(aq) + 2I⁻(aq) → CoI₂(aq)The sulfate ion doesn't appear in the net ionic equation because it does not participate in the reaction. The barium ion and the sulfate ion will form a precipitate, but they cancel each other out in the net ionic equation.

To know more about reaction  visit:-

https://brainly.com/question/30464598

#SPJ11

Donald secured a 4-year car lease at 5.30% compounded annually that required him to make payments of $882.31 at the beginning of each month. Calculate the cost of the car if he made a downpayment of $1,750.

Answers

The cost of the car when he made a down payment is approximately $39,834.35.

To calculate the cost of the car, we need to find the present value of the monthly payments and the down payment.

Step 1: Calculate the present value of the monthly payments:
The lease requires Donald to make payments of $882.31 at the beginning of each month for 4 years. We can use the present value formula to calculate the cost of these payments.

PV = PMT × [(1 - (1 + r)^(-n)) / r]

Where:
PV = Present value
PMT = Payment amount per period
r = Interest rate per period
n = Total number of periods

In this case, PMT = $882.31, r = 5.30% compounded annually (which is equivalent to 5.30%/12 = 0.442% compounded monthly), and n = 4 years × 12 months/year = 48 months.

Substituting these values into the formula, we get:

PV = $882.31 × [(1 - (1 + 0.00442)^(-48)) / 0.00442]

Using a calculator, the present value of the monthly payments is approximately $38,084.35.

Step 2: Add the downpayment:
Donald made a downpayment of $1,750. We need to add this amount to the present value of the monthly payments.

Total cost of the car = Present value of the monthly payments + Downpayment
Total cost of the car = $38,084.35 + $1,750

Calculating this, we find that the cost of the car is approximately $39,834.35.

Therefore, the cost of the car is approximately $39,834.35 when considering the 4-year car lease with 5.30% compounded annually, monthly payments of $882.31, and a downpayment of $1,750.

Learn more about compound interest:

brainly.com/question/24274034

#SPJ11

QUESTIONNAIRE Answer the following: 1. Compute the angle of the surface tension film leaves the glass for a vertical tube immersed in water if the diameter is 0.25 in and the capillary rise is 0.08 inches and o = 0.005 lb/ft. 2. Find the atmospheric pressure in kPa if a mercury barometer reads 742 mm.

Answers

1. The angle of the surface tension film leaving the glass for a vertical tube immersed in water is approximately 20 degrees.

2. The atmospheric pressure in kPa, given a mercury barometer reading of 742 mm, is approximately 98.93 kPa.

1. To calculate the angle, we use the formula θ = 2 × arctan(h/d), where θ is the contact angle, h is the capillary rise, and d is the diameter of the tube. Plugging in the given values, we have θ = 2 × arctan(0.08/0.25). Evaluating this expression, we find θ ≈ 20 degrees.

The concept of surface tension plays a crucial role in various natural phenomena and industrial processes. Understanding how surface tension affects liquids' behavior in confined spaces, such as capillary tubes, helps explain phenomena like capillary action and meniscus formation.

Moreover, this knowledge finds applications in fields like medicine (e.g., in microfluidics) and engineering (e.g., in designing capillary-driven systems). Studying the behavior of fluids at a small scale can lead to innovative technologies and improved understanding of fluid dynamics.

2. To convert the mercury barometer reading from mm to kPa, we use the equation: atmospheric pressure (in kPa) = (barometer reading in mm × density of mercury × acceleration due to gravity) / 1000. Given that the barometer reading is 742 mm and the density of mercury is approximately 13.6 g/cm³, we can calculate the atmospheric pressure as follows:

atmospheric pressure (in kPa) = (742 mm × 13.6 g/cm³ × 9.8 m/s²) / 1000

Converting units, we have:

atmospheric pressure (in kPa) ≈ (742 mm × 1.36 kg/dm³ × 0.0098 m/s²) / 1000

≈ 98.93 kPa

Therefore, the atmospheric pressure is approximately 98.93 kPa.

Barometers are essential instruments for measuring atmospheric pressure, which has significant implications in weather forecasting, aviation, and many other fields. Understanding atmospheric pressure variations helps meteorologists predict weather patterns and study atmospheric disturbances like storms and cyclones.

Additionally, atmospheric pressure influences various natural phenomena and human activities, making it a crucial parameter in scientific research and engineering projects.

Learn more about surface tension

brainly.com/question/571207

#SPJ11

Martensite is stronger than tempered martensite. Select one

Answers

Martensite is stronger than tempered martensite due to its brittle nature, while tempered martensite offers a combination of strength and toughness, making it suitable for industrial applications.

Martensite is stronger than tempered martensite. This statement is true and the reason behind this is explained below:

Martensite is a phase that is formed by the rapid cooling of austenite. It is a hard and brittle phase, but it possesses high strength and hardness. However, due to its brittle nature, it is not suitable for most industrial applications.Tempered martensite is produced by heating the martensitic phase to an intermediate temperature and then cooling it slowly. This process reduces the brittleness of the martensite and improves its toughness. As a result, tempered martensite possesses lower strength and hardness than martensite but higher toughness. This makes it more suitable for industrial applications where a combination of strength and toughness is required.

In conclusion, martensite is stronger than tempered martensite. However, tempered martensite possesses higher toughness than martensite. Therefore, the choice between martensite and tempered martensite depends on the application and the desired properties.

To know more about Martensite Visit:

https://brainly.com/question/33421309

#SPJ11

Please help I need the answer asp will give brainlist

Answers

The system of inequality y < 4x - 2 is represented by option B

How to identify inequality graphs

An inequality graph represents the graphical representation of an inequality on a coordinate plane.

It visually represents the set of points that satisfy the given inequality. In the graph, the shaded region indicates the solution set of the inequality.

In the equation we watch out for dotted lines which is used to represent a less than of greater than without "equal to"

The graph is attached

Learn more about linear functions at:

https://brainly.com/question/29721668

#SPJ1

A mixture of propanone and chloroform boils at a temperature of 64.9∘C with the composition of 70% chloroform. Boiling point of propanone and chloroform are 56.2% and 61.2% respectively. a) Construct the boiling point versus composition diagram for propanone chloroform mixture system. Label all points and curves on the graph. b) Predict the type of deviation occurs in the solution.

Answers

The diagram of the boiling point vs composition of the propanone and chloroform mixture is presented below:Boiling point vs composition of propanone chloroform mixtureFrom the boiling point versus composition graph, it can be noticed that the boiling point of propanone and chloroform mixture is maximum at 50% chloroform content which corresponds to a temperature of around 63°C.

It is also evident that the boiling point of the mixture is higher than both propanone and chloroform which implies that the interaction between the two components is positive. On the other hand, when the measured vapor pressure is greater than the predicted vapor pressure, a positive deviation occurs which suggests that the attractive forces between the molecules of different substances are greater than those between the pure substances.

For the given mixture of propanone and chloroform, a positive deviation is expected since the boiling point of the mixture is greater than both propanone and chloroform.

To know more about boiling point visit:-

https://brainly.com/question/2153588

#SPJ11

11.) A cell is set up with an iron/iron (III) nitrate cathode and a copper/copper(II) nitrate anode. This cell is best described as: 11.) a.) prespontaneous b.) spontaneous c.) isospontaneous d.) nonspontaneous

Answers

b). spontaneous. is the correct option. A cell is set up with an iron/iron (III) nitrate cathode and a copper/copper(II) nitrate anode. This cell is best described as spontaneous.

What is a spontaneous reaction?A spontaneous reaction refers to a reaction that happens on its own without requiring any additional energy. Such reactions occur naturally and move towards equilibrium. They can occur at any temperature since they do not require any energy to happen. They are also called exothermic reactions since they release energy.

The best option that describes the cell that is set up with an iron/iron (III) nitrate cathode and a copper/copper(II) nitrate anode is option (b) spontaneous. An iron/iron (III) nitrate cathode has an oxidation potential of -0.44 V, while a copper/copper (II) nitrate anode has an oxidation potential of +0.34 V. The overall potential difference (E0 cell) is +0.78 V, which is positive. This indicates that the reaction is spontaneous, as spontaneous reactions have positive E0 cell values.

To know more about nitrate anode visit:

brainly.com/question/29830947

#SPJ11

. How many fifths are in 1 1/4? *

Answers

Answer: 1 and 1/5

Step-by-step explanation:

To determine how many fifths are in 1 1/4, we need to convert the mixed number 1 1/4 into an improper fraction. To do this, we multiply the denominator by the whole number and add the numerator, then place that sum over the original denominator.So we get 1 1/4 = (4 x 1 + 1) / 4 = 5/4.

Now, we can divide 5 by 4 to find how many fifths are in 1 1/4. 5 divided by 4 is equal to 1 with a remainder of 1. This means that there is 1 whole fifth in 1 1/4 and one-fifth left over.

Therefore, the answer is 1 and 1/5.

So, there are 1 and 1/5 fifths in 1 1/4.

Suppose we have 24 floors & each floor consists of 4 flats,
2 of them having 3 bedrooms
2 of them having 2 bedrooms.
As a rule of thumb we take 2 persons/bed room.
The daily water requirement is between 50 gal/ day /person (Residential Building),
Solve: The daily water requirement for the whole building

Answers

The total water required for the whole building is:

2 × 96 × 2 × 2 + 3 × 144 × 2 × 2 = 1,152 + 1,728

= 2,880 gallons/day.

Given that there are 24 floors and each floor consists of 4 flats,

2 of which have 3 bedrooms and 2 of which have 2 bedrooms.

Therefore, the total number of flats in the building is 24 × 4 = 96.

Out of these, 2 × 2 × 24 = 96 flats have 2 bedrooms, and

2 × 3 × 24 = 144 flats have 3 bedrooms.

Thus, the total number of 2-bed flats and 3-bed flats are 96 and 144 respectively.

Therefore, the total number of bedrooms in the building is

2 × 96 + 3 × 144 = 576.

Out of these, the number of beds is 2 × 96 × 2 + 3 × 144 × 2 = 864.

Therefore, the total water required for the whole building is:

2 × 96 × 2 × 2 + 3 × 144 × 2 × 2 = 1,152 + 1,728 = 2,880 gallons/day.

To know more about water, visit:

https://brainly.com/question/28465561

#SPJ11

Question Rainfall of 2.50m per annum falls on a strip of land 1km wide lying between two parallel canals, one of which (canal A) is 3m higher than the other (canal B). The infiltration rate is 80% of the rainfall and there is no runoff. The aquifer that contains the canals is 10m deep below the level of canal B and both canals fully penetrate it. It is underlain by a horizontal impermeable stratum. Compute the discharge per 'm length into both canals, assuming their boundaries are vertical, and the aquifer coefficient of permeability is 10m/day.

Answers

The discharge per m length into both canals is 2025 m³/year.

Given data

Rainfall = 2.5 m/year

Width of land strip = 1 km = 1000 m

Canal A is 3 m higher than canal B.

Infiltration rate = 80% of the rainfall.

In the given problem, we need to calculate the discharge per m length into both canals.

So,

The discharge = Width of the land strip x infiltration rate x coefficient of permeability

The water that infiltrates through the soil goes down into the aquifer. The canals also get water from the aquifer.

Therefore, the total water flowing into both canals = infiltration into the aquifer + water directly flowing into the canals.

Now, calculating the infiltration,

Infiltration rate = 80% of 2.5 m/year

Infiltration rate = (80/100) x 2.5 m/year

Infiltration rate = 2 m/year

The volume of water infiltrating per year = Infiltration rate x area of land strip= 2 x 1000 m x 1 km= 2 x 1000 x 1000 m³

Total volume of water flowing into both canals = Infiltration + directly flowing water into the canals

The area of cross-section of each canal = 1 m x 10 m = 10 m²

So, the total volume of water flowing into both canals = Total water infiltrated per year+ Total water flowing into canals

= 2 x 1000 x 1000 + (3 - 0.5) x 1000 x 10

= 2 x 10^6 m³ + 25000 m³

= 2025000 m³

Discharge per m length of canal = Total volume of water / Length of the canal

The length of each canal = 1000 m

So, the discharge per m length of canal= 2025000 / 1000= 2025 m³/year

Therefore, the discharge per m length into both canals is 2025 m³/year.

To know more about permeability, visit:

https://brainly.com/question/32482559

#SPJ11

2x+4,x2-4 x2-x-6 hcf​

Answers

The highest common factor (HCF) of the given polynomials is (x + 2).

To find the highest common factor (HCF) of the given polynomials, we need to factorize each polynomial and identify the common factors.

Polynomial: 2x + 4

This polynomial can be factored out by taking out the common factor of 2:

2(x + 2)

Polynomial: x^2 - 4

This is a difference of squares, which can be factorized as:

(x + 2)(x - 2)

Polynomial: x^2 - x - 6

To factorize this polynomial, we need to find two numbers that multiply to give -6 and add up to -1 (coefficient of x). The numbers are -3 and 2, so we can rewrite the polynomial as:

(x - 3)(x + 2)

Now, we can compare the factors of the three polynomials to determine the HCF. We identify the common factors by taking the minimum power of each common factor:

Common factors:

(x + 2)

Hence, the highest common factor (HCF) of the given polynomials is (x + 2).

To learn more about HCF

https://brainly.com/question/29114178

#SPJ8

Complete question:

Find HCF - 2x + 4, x^2 - 4, x^2 - x - 6

1. Determine THREE (3) factors influencing the selection of ground improvement techniques. The proposed construction area for the new administration building for the LIMKOKWING University is located on the soft soil which is not suitable to support the structure over them. Ground improvement may be proposed for the safe construction process.
2. Identify the factors that are affecting the soil compaction. In the construction of highway embankments, earth dams, and many other engineering structures, loose soils must be compacted to increase their unit weights. Compaction increases the strength characteristics of soils, which increase the bearing capacity of foundations constructed over them.

Answers

Soil type, pricing, and availability are three factors that can affect your decision when choosing a ground improvement strategy.

What are they?

Soil type: Different ground improvement techniques are available for different types of soils.

The soil conditions on the construction site determine the appropriate technique for ground improvement.

Costs: The choice of ground improvement technique is also influenced by the cost of the technique. A particular ground improvement method may be effective but may be more expensive than another method.

As a result, the costs of different ground improvement techniques must be weighed against their benefits.

Availability: The availability of a specific ground improvement technique is another factor to consider.

Certain techniques may be unavailable due to a lack of technical expertise or appropriate equipment in the region.

2. Factors that affect soil compaction are as follows:

Water content: The degree of compaction is influenced by the water content of the soil.

Moisture helps the particles move closer together, but too much water results in an increase in volume and a decrease in the density of the soil.

The optimum water content for a specific soil type is used to achieve maximum dry density, which is the density of the soil when it has been completely compacted.

Granularity: The soil particle size distribution affects soil compaction. Soils with small grain sizes compact more closely than soils with large grain sizes.

The smaller grain sizes are packed tightly, reducing the air spaces between them, resulting in a denser soil when compacted.

Type of soil: The type of soil is also crucial in determining how well it will compact.

Clay soils are more readily compacted than sandy soils, and silty soils are more readily compacted than sandy soils.

Dense soils necessitate more effort to compact.

To know more on soil visit:

https://brainly.com/question/31227835

#SPJ11

The selection of ground improvement techniques for an administration building on soft soil is influenced by soil type, construction load, cost, and time constraints. Factors affecting soil compaction for structures include moisture content, soil type, and compaction effort, impacting construction outcomes.

1. Factors influencing the selection of ground improvement techniques for the construction of the new administration building for LIMKOKWING University on soft soil:

a. Soil Type and Properties: The characteristics of the soil, such as its composition, strength, and permeability, play a crucial role in determining the appropriate ground improvement technique. For example, if the soil is highly compressible and weak, techniques like deep soil mixing or stone columns may be preferred to increase its load-bearing capacity.

b. Construction Load and Building Design: The anticipated load and design of the administration building are important factors to consider when selecting ground improvement techniques. The weight and type of structure can influence the choice of technique to ensure stability and prevent settlement or uneven settlement.

c. Cost and Time Constraints: The financial and schedule constraints of the project are also factors to consider. Some ground improvement techniques may be more expensive or time-consuming than others. It is important to balance the cost and time requirements with the desired level of improvement.

2. Factors affecting soil compaction for the construction of highway embankments, earth dams, and other engineering structures:

a. Moisture Content: The moisture content of the soil affects its compaction characteristics. Optimum moisture content needs to be achieved to obtain maximum compaction. Too much moisture can result in a saturated soil that is difficult to compact, while too little moisture can lead to inadequate compaction.

b. Soil Type: Different types of soils have varying compaction characteristics. Cohesive soils, such as clay, require more effort to compact compared to granular soils like sand. The particle size distribution and grain shape of the soil also influence its compaction behavior.

c. Compaction Effort: The amount of compaction effort, typically achieved by using heavy machinery like compactors or rollers, is another crucial factor. The compaction effort needs to be sufficient to achieve the desired level of soil compaction and meet the engineering requirements.

It's important to note that these factors are not exhaustive, and there may be additional factors to consider depending on the specific project and site conditions.

Learn more about time constraints

https://brainly.com/question/31038373

#SPJ11

Determine the moment of inertia ly (in.4) of the shaded area about the y-axis. Given: x = 4 in. y = 9 in. z = 4 in. Type your answer in two (2) decimal places only without the unit. -3 in.-- X- in.X 2 in. y Z X

Answers

The moment of inertia of the shaded area about the y-axis is [tex]9 in^4[/tex].

To determine the moment of inertia, we need to calculate the integral of the area multiplied by the square of its distance from the y-axis. In this case, we are given the dimensions of the shaded area and the coordinates of its centroid (x, y, z).

First, we need to find the equation that represents the shaded area. From the given information, we can see that the shaded area is a rectangular shape with a length of 2 inches along the y-axis, a width of 4 inches along the x-axis, and a height of 3 inches along the z-axis.

The moment of inertia of a rectangular shape about the y-axis can be calculated using the following formula: [tex]I_y = (b * h^3) / 12[/tex], where b is the base (width) of the rectangle and h is its height.

In this case, b = 4 inches and h = 3 inches. Plugging these values into the formula, we get:


[tex]I_y = (4 * 3^3) / 12 = (4 * 27) / 12 = 108 / 12 = 9[/tex]

So, the moment of inertia of the shaded area about the y-axis is [tex]9 in^4[/tex].

Learn more about moment of inertia from this link:

https://brainly.com/question/14460640

#SPJ11

Which of the following measuring devices used to measure liquid level in the tank 2 Select one: a. Displacer devices b. Ultrasonic Level Meter c. Float- actuated devices d. Orifice plates TRUE OR FALSE: In on-off control switching differential is the range of process variable values where the controller tells final control element to open and to shut Select one: O True D O False TRUE OR FALSE: On-off controller used where precise control is not necessary and where the mass of system is small Select one: True False

Answers

The two measuring devices used to measure liquid level in the tank are Displacer devices and Float- actuated devices. The options a and c are the correct answers.

Among the given measuring devices used to measure liquid level in the tank, Displacer devices and Float-actuated devices are the measuring devices used to measure liquid level in the tank. These are given below:

Displacer devices: These devices operate on Archimedes’ principle and are based on the design of a spring with a cylinder attached to its bottom end. These are generally used for level measurement in liquids that are not transparent and whose properties do not allow the use of other types of level indicators.

Float-actuated devices: These devices use the buoyancy principle and have a buoyant element. These are used for level measurement in transparent and opaque liquids where a reasonably accurate measurement of the level is needed. The given statement, "In on-off control switching differential is the range of process variable values where the controller tells final control element to open and to shut" is true. In on-off control switching differential is the range of process variable values where the controller tells final control element to open and to shut.

The statement "On-off controller used where precise control is not necessary and where the mass of system is small" is also true. On-off controller used where precise control is not necessary and where the mass of the system is small.

Learn more about Displacer devices visit:

brainly.com/question/32025525

#SPJ11


Find the slope of every line that is parallel to
the line on the graph
Enter the correct answer.

Answers

Answer:

[tex]m = \frac{2 - 1}{6 - 0} = \frac{1}{6} [/tex]

On March 30, Century Link received an invoice dated March 28 from ACME Manufacturing for 48 televisions at a cost of $125 each. Century received a 9/4/5 chain discount. Shipping terms were FOB shipping point. ACME prepaid the $93 freight. Terms were 2/10 EOM. When Century received the goods, 3 sets were defective. Century retumed these sets to ACME On Aprit 8 , Century sent a $165 partial payment. Century will pay the balance on May 6 . What is Century's final payment on May 6 ? Assume no taxes. (Do not round intermediate calculations. Round your answer to the nearest cent.)

Answers

Century Link’s final payment on May 6th will be $4,908.27.On March 30, CenturyLink received an invoice dated March 28 from ACME Manufacturing for 48 televisions at a cost of $125 each.

Century received a 9/4/5 chain discount. Shipping terms were FOB shipping point. ACME prepaid the $93 freight. Terms were 2/10 EOM.When Century received the goods, three sets were defective. Century returned these sets to ACME. On April 8, Century sent a $165 partial payment. Century will pay the balance on May 6.We have to find the final payment to be made on May 6 Let’s calculate the price first. The cost of each TV is $125 so the cost of 48 televisions would be $125 x 48= $6,000 Now we will calculate the amount of discount that Century Link received.9/4/5 indicates three separate discounts:9% followed by a 4% discount followed by another 5% discount.

To calculate this discount, we can multiply the discounts together to determine the net effect of the discounts on the purchase.

1- [(1 - 0.09)(1 - 0.04)(1 - 0.05)] = 0.8622392

This means that after all discounts, the company was left with a cost of 86.22% of the original cost. The amount paid by the company will be:

0.8622392 x $6,000 = $5,173.435 (This is the amount Century Link paid ACME for televisions)

Century Link returned three sets, and each TV was worth $125, so

$125 x 3 = $375

Century Link sent a partial payment of $165 on April 8, so the remaining amount due is:

$5,173.435 - $165 = $5,008.435

Century Link can get a discount of 2% for paying early (within 10 days) and the final payment is due on May 6th so the discount can be applied 2% of

$5,008.435 = $100.1687(Discount on May 6th payment)

Now subtract the discount from the total amount due:

$5,008.435 - $100.1687 = $4,908.27

To know more about televisions visit:

https://brainly.com/question/33358716

#SPJ11

What is the measurement of each angle?

IF YOU GIVE ME THE RIGHT ANSWER, I WILL GIVE YOU BRAINLEST!!

Answers

The angle measures of the triangle by triangle sum property are 87, 25, and 68.

By the triangle sum property:

(7x-11) + (2x-3) + (5x-2) = 180

combine the like terms:

14x - 16 = 180

add 16 to both sides:

14x = 196

divide 14 into both sides:

x = 14

substitute x for each expression to find the measure of each angle:

7x - 11 = 7(14) -11 = 87

2x - 3 = 2(14) - 3 = 25

5x - 2 = 5(14) - 2 = 68

Thus, the angle measures of the triangle by triangle sum property are 87, 25, and 68.

Learn more about triangle sum property:

brainly.com/question/9695218

Answer:

7x-11=87
5x-2=68
2x-3=25

Step-by-step explanation:

The angles in a triangle all add up to 180.
So henceforth, (7x-11)+(5x-2)+(2x-3)=180
Collect the like terms
14x-16=180
Add 16 on both sides to get x on one side
14x=196
Divide both sides by 14
x=14
-
Now you just substitute x in.
7x-11=87
7*14=98 98-11=87

5x-2=68
5*14=70 70-2=68

2x-3=25
2*14=28 28-3=25
Hope this helps


Physical chemistry&thermodynamics
2. For a reaction A → B of order n, show that the half-life time is inversely proportional to [A]."-1. n1

Answers

The half-life time of a reaction A → B of order n is inversely proportional to [A] raised to the power of -1, where n is the order of the reaction.

In a reaction of order n, the rate of reaction is given by the rate equation:

rate =  [tex]k[A]^n[/tex]

where k is the rate constant and [A] is the concentration of A.

The half-life of a reaction is the time it takes for the concentration of A to decrease to half its initial value. Let's denote the initial concentration of A as [A]₀ and the concentration at any time t as [A]t.

Using the rate equation, we can express the rate of reaction as:

rate = -d[A]/dt = [tex]k[A]^n[/tex]

Integrating both sides of the equation with respect to time, we get:

[tex]\int(1/[A]^n) \,d[A] = -\int k \,dt[/tex]

Integrating from [A]₀ to [A]t and from 0 to t, we have:

[tex]\int(1/[A]^n) \,d[A] = -\int k \,dt[/tex]

-ln([A]t/[A]₀)/n = -kt

Simplifying, we get:

ln([A]t/[A]₀) = kt/n

Taking the natural logarithm of both sides:

ln([A]t/[A]₀) = -kt/n

Rearranging the equation, we have:

t = -n/(k ln([A]t/[A]₀))

From this equation, we can see that the half-life time, represented by t, is inversely proportional to [A] raised to the power of -1.

Learn more about half-life time here:

https://brainly.com/question/29784353

#SPJ4

Other Questions
If when an object is placed 20 cm in front of a mirror the image is located 13.6 cm behind the mirror, determine the focal length of the mirror. A 40 ftby 40ft laboratory room with 9ft high ceilings will have an ambient lighting target illuminance of 80 fc at a work plane that is 24 in above the floor. It is anticipated that the ceiling reflectance is 0.80 and the average wall reflectance is about 0.7. The space will be illuminated with recessed lay-in 2ft x 4ft open parabolic troffer luminaires with four lamps, as shown in Figure 20.16. The initial output of the fluorescent lamps is 2950 lumen. The light loss factor will be assumed to be 0.70. Draw the scenario showing the ceiling, floor, and room cavity together with the room dimensions . (This is the only thing that was given to us) 6. What are measurement error sources? 7. The first-order of uncertainty? 8. Explain what is meant by the terms "true value," "best estimate," "mean value," "uncertainty," and "confidence interval." 9. Discuss how systematic uncertainty can be estimated for a measured value. How is random uncertainty estimated? 10. How to combine the systematic uncertainty and random uncertainty? Section II: Data and Observations4. Locate the data and observations collected in your lab guide. What are the key results? Howwould you best summarize the data to relate your findings? The two months interest rates in Switzerland and the US are 1% and 2% respectively perannum with continuous compounding. The spot prices of the Swiss Franc is $1.05. The futureprice for a contact deliverable in 2 months is 1.05. What arbitrage opportunities does thiscreate? Nolan is in favor of a share repurchase. He argues that a repurchase will increase the companys P/E ratio. Is his argument correct? How will a share repurchase affect the value of the company? Please discuss in detail. Three-Phase Induction Machine): A three phase, Y-connected, four-pole, 60 Hz induction motor is rated at 25 hp (1 hp = 746 W) and 460 V (line-to-line) and operating at speed of 1750 rpm. The Thevenin's equivalent circuit parameters with respect to the terminals of the shunt component are V1,eq - 440 V (line-to-line) and R1eq +j X1eq = 0.6 +j 1.04 12 while R2= 0.2 12 and X2= 0.50 12. Calculate: a) The synchronous speed Wsyn, the operating slip s, the starting slip Sstart and the slip corresponding to maximum torque Smaxt (no need to calculate Tmax). b) The starting current Istart and starting torque T start 7. How is Li-Fi different from Wi-Fi? Given an option, which one would you prefer and why? A 5.5 kg block rests on a ramp with a 35 slope. The coefficients of static and kinetic friction are s = 0.60 and k = 0.44. If you push on the box with a force parallel to the ramp surface, what is the minimum amount of force needed to get the block moving? Provide labeled Force Diagram, Original formulas (before numbers are put in), formulas with numerical values entered. Explain the given VB code using your own words Explain the following line of code using your own words: 'txtText.text = "" _______ d) Identify three safety critical systems which were non-functional at the Union Carbide Bhopal facility and explain how lack of maintenance led to the Bhopal tragedy. b. If a is an integer, show that either a = 0 mod 4 or a = 1 mod 4. What is the run time complexity of the given function and what does it do? You can assume minindex function takes O(n) and returns index of the minimum value of the given vector (20) vector alg(vector> graph, int source) { int s = graph.size(); vector cost; vector known; vector path; for(int i =0; i(cost[current] + graph[current] [i])) cost[i] = cost[current] + graph[current][i]; path[i] = current; } } return cost; } a sector has radius 10 mm and area 40/3 pie mm^2. what is the measure, in degrees, of the central angle of the sector? Questions for Realism and DeparturesYou will choose one topic from the list below and write a threeto five paragraph summary. You will need to do some research. Add aphoto (and a personal reaction) Air is drawn from the atmosphere into a turbo- machine. At the exit, conditions are 500 kPa (gage) and 130C. The exit speed is 100 m/s and the mass flow rate is 0.8 kg/s. Flow is steady and there is no heat transfer. Com- pute the shaft work interaction with the surroundings. Robert wants to determine what behaviors are associated with dishonesty. To do this, he uses a polygraph machine to measure participants heart rate, blood pressure, and respiration when they are being dishonest. Robert is using the measure the participants nervous system response. approach to Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answe biological; autonomic evolutionary, somatic behavioral: peripheral psychodynamic, central b C d Unanswered 2. Prove the statement is true, or find a counter example to show it is false. vx,y ER,x+y = x + y bru 3. True or False? All occurrences of the letter t in the phrase Good Luck are lowercase. Justify your answer. (4) (4) 2 Water at a gauge pressure of P = 5.2 atm at street level flows into an office building at a speed of 0.98 m/s through a pipe 4.8 cm in diameter. The pipe tapers down to 2.4 cm in diameter by the top floor, 16 m above (Figure 1). Assume no branch pipes and ignore viscosity.Calculate the flow velocity in the pipe on the top floor.Calculate the gauge pressure in the pipe on the top floor. Role of Biko and BCM in their political organization of black south africans?