The acceleration of the electron is -2.21 * 10¹⁴ m/s².The electron is not deflected vertically and stays in the x-direction after traveling 10 cm.
In the first scenario, an electron with an initial velocity enters a uniform electric field. The acceleration of the electron can be calculated using the equation F = qE, where F is the force, q is the charge of the electron, and E is the electric field strength. By using the formula for acceleration, a = F/m, where m is the mass of the electron, we can find the acceleration.
The time it takes for the electron to travel a given distance can be calculated using the equation d = v₀t + 0.5at². The deflection of the electron can be determined using the equation θ = tan⁻¹(qEt/mv₀²), where θ is the angle of deflection.
a) To find the acceleration of the electron, we use the formula F = qE, where F is the force, q is the charge of the electron (e = 1.6 * 10⁻¹⁹ C), and E is the electric field strength (1,400 N/C). Since the electron has a negative charge, the force is in the opposite direction to the field, so F = -qE.
The mass of an electron (m) is approximately 9.11 * 10⁻³¹ kg. Therefore, the acceleration (a) can be calculated using a = F/m.
a = (-1.6 * 10⁻¹⁹ C) * (1,400 N/C) / (9.11 * 10⁻³¹ kg) ≈ -2.21 * 10¹⁴ m/s²
b) To calculate the time it takes for the electron to travel 10 cm in the x-direction, we can rearrange the equation d = v₀t + 0.5at² and solve for t. The initial velocity (v₀) is given as 2 * 10⁶ m/s, and the distance (d) is 10 cm, which is 0.1 m. Plugging in the known values, we have:
0.1 m = (2 * 10⁶ m/s) * t + 0.5 * (-2.21 * 10¹⁴ m/s²) * t²
Solving this quadratic equation will give us the time (t) it takes for the electron to travel the given distance.
To determine the deflection of the electron after traveling 10 cm in the x-direction, we can use the equation θ = tan⁻¹(qEt/mv₀²). Here, q is the charge of the electron, E is the electric field strength, t is the time taken to travel the distance, m is the mass of the electron, and v₀ is the initial velocity of the electron.
Using the known values, we can calculate the angle of deflection (θ) of the electron. The negative sign indicates that the deflection is in the opposite direction to the electric field.
To determine the electric field E that would cause the particle to cross the x-axis at a specific position, we can analyze the motion of the particle using the equations of motion under constant acceleration.
Learn more about velocity here ;
https://brainly.com/question/17127206
#SPJ11
When it hangs straight down,the pendulum is about 1. 27 x 105 m off the ground. What is the height of the building if the pendulum swings with a frequency of ⅙ hertz
The height of the building is approximately 1.26994 x 10^5 meters.
To determine the height of the building, we can use the formula for the period of a simple pendulum:
T = 2π√(L/g),
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
In this case, the period T is the reciprocal of the frequency f:
T = 1/f.
Given that the frequency f is 1/6 Hz, we can calculate the period T:
T = 1/(1/6) = 6 seconds.
Next, we can rearrange the formula for the period to solve for the length L:
L = (T^2 * g) / (4π^2).
We can use the value of the acceleration due to gravity, g ≈ 9.8 m/s².
Substituting the known values:
L = (6^2 * 9.8) / (4π^2) ≈ 5.96 m.
Now, to find the height of the building, we subtract the length of the pendulum from the distance off the ground:
Height of the building = Distance off the ground - Length of the pendulum = 1.27 x 10^5 m - 5.96 m ≈ 1.26994 x 10^5 m.
Learn more about height here :-
https://brainly.com/question/21982748
#SPJ11
What should be the height of a dipole antenna (of dimensions 1/4 wavelength) if it is to transmit 1200 kHz radiowaves? 11.4 m O 60 cm O 1.12 m O 62.5 m © 250 m
The correct option among the options given in the question is the third option. The height of a dipole antenna (of dimensions 1/4 wavelength) if it is to transmit 1200 kHz radiowaves is c. 1.12m.
What is Dipole Antenna?
A dipole antenna is one of the most used types of RF antennas. It is very simple and easy to construct and can be used as a standard against which other antennas can be compared. Dipole antennas are used in many areas, such as in amateur radio, broadcast, and television antennas. The most popular version of this antenna is the half-wavelength dipole.
How to calculate the height of a dipole antenna?
The height of a dipole antenna can be calculated using the formula:
h = λ / 4
where
h is the height of the antenna
λ is the wavelength of the radiowaves
As per the question, we are given that the wavelength of the radiowaves is λ = 300000000 / 1200000 = 250m.
So, the height of the antenna will be
h = λ / 4
= 250 / 4
= 62.5m.
But the given options do not match the answer. We know that a 1/4 wavelength dipole antenna is half of a 1/2 wavelength antenna. Therefore, the height of a 1/4 wavelength dipole antenna is h = 1/2 * 1/4 * λ = 1/8 * λ.
We are given that the radiowaves are of frequency 1200kHz, or wavelength λ = 300000000 / 1200000 = 250m.
h = 1/8 * λ
= 1/8 * 250
= 31.25m
To learn more about dipole antenna, refer:-
https://brainly.com/question/27627085
#SPJ11
Why does the lower part of the child appear so much different in size from the upper part?
*
Captionless Image
The light rays that travel through water and then into air are refracted.
The light rays that travel through air and then into water are reflected.
The light rays that travel through water and then into air are enlarged.
The light rays that travel through air and then into water are reduced.
The size difference between the upper and lower parts of the child in the image is caused by refraction, where light bending in water makes the submerged part appear bigger.
The lower part of the child appears much different in size from the upper part due to the phenomenon of refraction. Refraction is the bending of light as it passes through a substance of different refractive indices. The refractive index of water is higher than that of air. As a result, when light rays pass from water into the air, they have refracted away from the normal and the image appears enlarged. In this image, the child is partially submerged in water. Therefore, the light rays coming from the lower part of the child are refracted as they pass from water to air, making the lower part of the child appear bigger. On the other hand, the upper part of the child is not submerged in water, and the light rays coming from the upper part pass through the air only, making the upper part appear smaller by comparison. In summary, the difference in size between the upper and lower parts of the child in the image is due to the phenomenon of refraction.For more questions on refraction
https://brainly.com/question/27932095
#SPJ8
A Chinook salmon can jump out of water with a speed of 7.00 m/s. How far horizontally d can a Chinook salmon travel through the air if it leaves the water with an initial angle of 0= 28.0° with respect to the horizontal? (Neglect any effects due to air resistance.
A Chinook salmon can travel approximately 5.93 meters horizontally through the air if it leaves the water with an initial angle of 28.0 degrees with respect to the horizontal.
To determine the horizontal distance traveled by the Chinook salmon, we can analyze its projectile motion. The initial speed of the jump is given as 7.00 m/s, and the angle is 28.0 degrees.
We can break down the motion into horizontal and vertical components. The horizontal component of the initial velocity remains constant throughout the motion, while the vertical component is affected by gravity.
First, we calculate the time of flight, which is the total time the salmon spends in the air. The time of flight can be determined using the vertical component of the initial velocity and the acceleration due to gravity. The vertical component is given by Vo * sin(θ), where Vo is the initial speed and θ is the angle. The time of flight is then given by t = (2 * Vo * sin(θ)) / g, where g is the acceleration due to gravity.
Next, we calculate the horizontal distance traveled by multiplying the horizontal component of the initial velocity by the time of flight. The horizontal component is given by Vo * cos(θ), and the distance is then d = (Vo * cos(θ)) * t.
Substituting the given values, we find d ≈ 5.93 meters. Therefore, a Chinook salmon can travel approximately 5.93 meters horizontally through the air if it leaves the water with an initial angle of 28.0 degrees with respect to the horizontal.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
A square plate with a side length of L m and mass M kg slides over a
oil layer on a plane with a 35° inclination in relation to the ground. The layer thickness
of oil between the plane and the plate is mm (assume a linear velocity profile in the film). if the
terminal velocity of this plate is V m/s, calculate the viscosity of this oil. Ignore effects of
air resistance. Assign values to L, M, a and V to solve this question.
The viscosity of the oil is approximately 0.00635 kg/(m·s), assuming a square plate with a side length of 0.5 m, a mass of 2 kg, an oil layer thickness of 1 mm, and a terminal velocity of 0.2 m/s.
To calculate the viscosity of the oil based on the given parameters, we can use the concept of terminal velocity and the equation for viscous drag force. The terminal velocity is the maximum velocity reached by the plate when the drag force equals the gravitational force acting on it.
The drag force on the plate can be expressed as:
Fd = 6πηLNV
Where:
Fd is the drag force
η is the dynamic viscosity of the oil
L is the side length of the square plate
N is a constant related to the shape of the plate (for a square plate, N = 1.36)
V is the terminal velocity of the plate
The gravitational force acting on the plate is:
Fg = Mg
Where:
M is the mass of the plate
g is the acceleration due to gravity
To find the viscosity (η) of the oil, we can equate the drag force and the gravitational force and solve for η:
6πηLNV = Mg
Rearranging the equation:
η = (Mg) / (6πLNV)
To solve the question, we need specific values or assumptions. Let's assign some values as an example:
L = 0.5 m (side length of the square plate)
M = 2 kg (mass of the plate)
a = 1 mm (thickness of the oil layer)
V = 0.2 m/s (terminal velocity of the plate)
Substituting the values into the equation:
η = (2 kg * 9.8 m/s²) / (6π * 0.5 m * 1.36 * 0.001 m * 0.2 m/s)
Calculating the result:
η ≈ 0.00635 kg/(m·s)
Therefore, the viscosity of the oil is approximately 0.00635 kg/(m·s), assuming a square plate with a side length of 0.5 m, a mass of 2 kg, an oil layer thickness of 1 mm, and a terminal velocity of 0.2 m/s.
Learn more about viscosity on:
https://brainly.com/question/30799929
#SPJ11
The environmental lapse rate is 8C/km and the initial
temperature at the surface is
25C. What is the atmospheric stability of the layer from the
surface to 1km?
The atmospheric stability of the layer from the surface to 1 km is stable. it is stable and the atmosphere has a strong tendency to resist upward vertical movement of air
Atmospheric stability is the property of the atmosphere where it opposes the vertical motion of air in response to disturbances.
Based on the given data, the initial temperature at the surface is 25°C and the environmental lapse rate is 8°C/km.
The atmospheric stability of the layer from the surface to 1 km can be calculated by comparing the dry adiabatic lapse rate (DALR) with the environmental lapse rate (ELR). The dry adiabatic lapse rate (DALR) is 10°C/km, which is the rate at which the unsaturated parcel of air rises or sinks as a result of the adiabatic process.
The atmospheric stability can be classified into three categories based on comparing the environmental lapse rate (ELR) and the dry adiabatic lapse rate (DALR). They are as follows:
Unstable Atmosphere (ELR > DALR)
Conditionally Unstable Atmosphere (ELR = DALR)
Stable Atmosphere (ELR < DALR)
The given environmental lapse rate is 8°C/km which is less than the dry adiabatic lapse rate of 10°C/km. So, the atmosphere is stable in this layer from the surface to 1 km.
However, we need to verify whether it is absolutely stable or conditionally stable by looking at the saturated adiabatic lapse rate (SALR) that governs the behaviour of air parcels that are saturated. The saturated adiabatic lapse rate (SALR) is lower than the DALR, indicating that a saturated air parcel cools more slowly than an unsaturated air parcel when it rises or sinks adiabatically.
The layer would be conditionally unstable if the environmental lapse rate (ELR) was lower than the saturated adiabatic lapse rate (SALR) but greater than the dry adiabatic lapse rate (DALR). Since we do not know the moisture content in the atmosphere, we cannot compute SALR. Hence, the atmosphere in this layer is stable with an ELR of 8°C/km and a DALR of 10°C/km. Therefore, it is stable and the atmosphere has a strong tendency to resist upward vertical movement of air.
Learn more about atmospheric stability:
https://brainly.com/question/31830207
#SPJ11
Consider a periodic signal 0 ≤ t ≤ 1 x(t) = { ¹ ₂ 1 < t < 2 With period T = 2. The derivative of this signal is related to the impulse train q(t) = Σ a(t-2k) k=-[infinity]0 With period T = 2. It can be shown that dx(t) dt = A₁q(t t₁) + A₂q(t — t₂) Determine the values of A₁, t₁, A₂ and t₂
The required values are A₁ = 1, t₁ = 0, A₂ = −1 and t₂ = 1.
The given periodic signal is
x(t) = { ¹ ₂ 1 < t < 2
With period T = 2.
The derivative of this signal is given as
dx(t)dt = A₁q(t − t₁) + A₂q(t − t₂)
where q(t) = Σa(t − 2k), k= −∞ to 0 is an impulse train with period T = 2.
To find the values of A₁, t₁, A₂ and t₂ we need to calculate
q(t − t₁) and q(t − t₂).
From the given impulse train, we have
a(t − 2k) = { ¹ 1 2k ≤ t < 2k + 2 0 otherwise.
Substituting k = 0 in the above equation, we get
a(t) = { ¹ 1 0 ≤ t < 2 0 otherwise.
So, the impulse train can be written as
k(t) = { ¹ 1 0 ≤ t < 2 0 otherwise.
Now,
q(t − t₁) = Σ a(t − t₁ − 2k),
k= −∞ to 0q(t − t₁) = { ¹ 1 t₁ ≤ t < t₁ + 2 0 otherwise.
As period T = 2, we have t₁ = 0 or t₁ = 1.
Similarly,
q(t − t₂) = { ¹ 1 t₂ ≤ t < t₂ + 2 0 otherwise.
Using the given expression, we have
dx(t)dt = A₁q(t − t₁) + A₂q(t − t₂)
Now,
dx(t)dt = { ¹ 0 0 ≤ t < 1 A₁ 1 1 ≤ t < 2 A₂ 1 < t < 2
Therefore,
A₁ = 1 and A₂ = −1.
Now, we can take t₁ = 0 and t₂ = 1.
Hence, the values of A₁, t₁, A₂, and t₂ are
A₁ = 1, t₁ = 0, A₂ = −1 and t₂ = 1.
Thus, the required values are A₁ = 1, t₁ = 0, A₂ = −1 and t₂ = 1.
Learn more about periodic signal here:
https://brainly.com/question/30465056
#SPJ11
A car moving with a constant speed of 48 km/hr completes a circular track in 7.2 minutes. Calculate the magnitude of the acceleration of the car in the unit of m/s2.
The magnitude of the acceleration is found to be approximately 13.33m/s².
To calculate the magnitude of the acceleration of the car, we first need to convert the time taken to travel around the circular track into seconds. Given that the car completes the track in 7.2 minutes, we multiply this value by 60 to convert it to seconds. Thus, the time taken is 7.2 minutes * 60 seconds/minute = 432 seconds.
The formula for centripetal acceleration is given by a = v²/r, where "v" is the velocity of the car and "r" is the radius of the circular track. The velocity of the car can be converted from kilometers per hour (km/hr) to meters per second (m/s) by multiplying it by 1000/3600, since there are 1000 meters in a kilometer and 3600 seconds in an hour. Therefore, the velocity is 48 km/hr * 1000 m/km / 3600 s/h = 13.33 m/s.
Now we need to find the radius of the circular track. Since the car completes a full circle, the distance traveled is equal to the circumference of the track. The formula for circumference is given by C = 2πr, where "C" is the circumference and "r" is the radius.
Rearranging the formula, we have r = C/(2π). However, we are not given the value of the circumference, so we cannot calculate the exact radius.
Given the limited information, we can only calculate the magnitude of the acceleration in terms of the unknown radius. Therefore, the magnitude of the acceleration is a = (13.33 m/s)²/r.
Learn more about acceleration:
https://brainly.com/question/17123770
#SPJ11
An object is placed 60 em from a converging ('convex') lens with a focal length of magnitude 10 cm. What is is the magnification? A) -0.10 B) 0.10 C) 0.15 D) 0.20 E) -0.20
An object is placed 60 em from a converging ('convex') lens with a focal length of magnitude 10 cm. The magnification is -0.20.So option E is correct.
To find the magnification of an object placed in front of a converging lens, we can use the lens formula:
1/f = 1/do - 1/di
where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).
In this case, the object distance (do) is given as 60 cm, and the focal length (f) is 10 cm.
Substituting the given values into the lens formula:
1/10 = 1/60 - 1/di
Simplifying the equation:
1/10 = (60 - di)/ (60 × di)
Cross-multiplying:
di = (60 × di) / 10 - (60 ×di) / 60
di = 6di - di
di = 5di
di = do/5
The magnification (m) is given by:
m = -di / do
Substituting the values:
m = -(do/5) / do
m = -1/5
Therefore, the magnification is -0.20. Therefore option E is correct.
To learn more about magnification visit: https://brainly.com/question/131206
#SPJ11
An adiabatic process is one in which i. no heat enters or leaves the system. ii. only mass is allowed crossing the boundary. iii. the temperature of the system changes. iv. the change in internal energy is equal to the mechanical workdone. O a. ii, iii and iv O b. i, ii, iii and iv O c. i, iii and iv O d. i, ii and iii
An adiabatic process is one in which no heat enters or leaves the system, and the change in internal energy is equal to the mechanical work done. Therefore, the correct answer is option c. I, iii, and iv.
An adiabatic process is characterized by the absence of heat transfer between the system and its surroundings. In other words, no heat enters or leaves the system during an adiabatic process
(i). However, this does not imply that only mass is allowed to cross the system boundary
(ii). Adiabatic processes can occur in both open and closed systems. Additionally, during an adiabatic process, the temperature of the system can change
(iii). This change in temperature is a result of the work done on or by the system. The change in internal energy is equal to the mechanical work done (iv) because there is no heat transfer to account for. Thus, the correct answer is option c. I, iii, and iv.
To know more about the adiabatic process click here:
https://brainly.com/question/29209594
#SPJ11
A 175-g object is attached to a spring that has a force constant of 72.5 N/m. The object is pulled 8.25 cm to the right of equilibrium and released from rest to slide on a horizontal, frictionless table. a.) Calculate the maximum speed of the object (m/s). b)Find the locations of the object when its velocity is one-third of the maximum speed. Treat the equilibrium position as zero, positions to the right as positive, and positions to the left as negative. (cm)
A 175-g object is attached to a spring that has a force constant of 72.5 N/m. The object is pulled 8.25 cm to the right of equilibrium and released from rest to slide on a horizontal, friction less table.when the object's velocity is one-third of the maximum speed, its location (displacement from equilibrium) is approximately 12.1 cm to the right.
a) To calculate the maximum speed of the object, we can use the principle of conservation of mechanical energy. At the maximum speed, all the potential energy stored in the spring is converted into kinetic energy.
The potential energy stored in the spring can be calculated using the formula:
Potential energy = (1/2) × k × x²
where k is the force constant of the spring and x is the displacement from the equilibrium position.
Given that the object is pulled 8.25 cm to the right of equilibrium, we can convert it to meters: x = 8.25 cm = 0.0825 m.
The potential energy stored in the spring is:
Potential energy = (1/2) × (72.5 N/m) × (0.0825 m)²
Next, we equate the potential energy to the kinetic energy at the maximum speed:
Potential energy = Kinetic energy
(1/2)× (72.5 N/m) × (0.0825 m)² = (1/2) × m × v²
We need to convert the mass from grams to kilograms: m = 175 g = 0.175 kg.
Simplifying the equation and solving for v (velocity):
(72.5 N/m) × (0.0825 m)² = 0.5 × 0.175 kg × v²
v² = (72.5 N/m) × (0.0825 m)² / 0.175 kg
v² ≈ 6.0857
v ≈ √6.0857 ≈ 2.47 m/s
Therefore, the maximum speed of the object is approximately 2.47 m/s.
b) To find the locations of the object when its velocity is one-third of the maximum speed, we need to determine the corresponding displacement from the equilibrium position.
Using the equation of motion for simple harmonic motion, we can relate the displacement (x) and velocity (v) as follows:
v = ω × x
where ω is the angular frequency of the system.
The angular frequency can be calculated using the formula:
ω = √(k/m)
Substituting the given values:
ω = √(72.5 N/m / 0.175 kg)
ω ≈ √414.2857 ≈ 20.354 rad/s
Now, we can find the displacement (x) when the velocity is one-third of the maximum speed by rearranging the equation:
x = v / ω
x = (2.47 m/s) / 20.354 rad/s
x ≈ 0.121 m
Converting the displacement to centimeters:
x ≈ 0.121 m × 100 cm/m ≈ 12.1 cm
Therefore, when the object's velocity is one-third of the maximum speed, its location (displacement from equilibrium) is approximately 12.1 cm to the right.
To learn more about conservation of mechanical energy visit: https://brainly.com/question/19969393
#SPJ11
Suppose you have a 9.45 V battery, a 2.50μF capacitor, and a 7.35μF capacitor. (a) Find the charge (in C) and energy (in J) stored if the capacitors are connected to the battery in series. charge energy
C
J
(b) Do the same for a parallel connection. charge C energy ] Additional Materials /1 Points]
To determine the charge and energy stored in capacitors connected in series and in parallel to a battery, calculations using the given values of the battery voltage and capacitances need to be performed.
(a) When the capacitors are connected in series to the battery, the total capacitance (C_series) is given by the reciprocal of the sum of the reciprocals of the individual capacitances (C1 and C2):1/C_series = 1/C1 + 1/C2.Using this total capacitance, the charge (Q_series) stored in the series combination can be calculated using the formula Q_series = C_series * V, where V is the battery voltage. The energy (E_series) stored in the capacitors can be determined using the formula E_series = (1/2) * C_series * V^2.
(b) When the capacitors are connected in parallel to the battery, the total capacitance (C_parallel) is the sum of the individual capacitances (C1 and C2): C_parallel = C1 + C2. The charge (Q_parallel) stored in the parallel combination is calculated using the formula Q_parallel = C_parallel * V, and the energy (E_parallel) stored is given by E_parallel = (1/2) * C_parallel * V^2.By substituting the given values into the respective formulas, the charge and energy stored in the capacitors can be determined for both the series and parallel connections.
Learn more about capacitors here:
https://brainly.com/question/31627158
#SPJ11
At the CrossFit Championships, a 71 kg athlete is pushing a 150 kg sled. The athlete and the sled move forward together with a maximum forward force of 1,477 N. Assuming friction is zero, what is the magnitude of the force (in N) of the athlete on the sled? Hint: It may be easier to work out the acceleration first. Hint: Enter only the numerical part of your answer to the nearest integer.
The magnitude of the force (in N) of the athlete on the sled is 1,281 N (to the nearest integer).
Explanation: Given,An athlete who weighs 71 kg is pushing a 150 kg sled.The forward force of the athlete and the sled is 1477 N.The acceleration of the athlete can be calculated as follows:F = maF = 1477 N(a)Now, we need to calculate the acceleration of the athlete(a) = F / m(a) = 1477 N / (71 kg + 150 kg) = 7 m/s^2The magnitude of the force of the athlete on the sled can be calculated as follows:F = maF = (71 kg)(7 m/s^2)F = 497 N.
Now, we need to calculate the magnitude of the force of the athlete on the sled. Force exerted by the sled on the athlete = F = maForce exerted by the athlete on the sled = 1477 N – 497 N (as calculated) = 980 NThus, the magnitude of the force (in N) of the athlete on the sled is 1,281 N (to the nearest integer).
Learn more on acceleration here:
brainly.in/question/9415862
#SPJ11
A 5.0-µF capacitor is charged to 50 V, and a 2.0-µF capacitor is charged to 100 V. The two are disconnected from charging batteries and connected in parallel, with the positive plate of one attached to the positive plate of the other.
(a) What is the common voltage across each capacitor after they are connected in this way? (b) Compare the total electrostatic energy before and after the capacitors are connected. Speculate on the discrepancy. (c) Repeat Parts (a) and (b) with the charged capacitors being connected with the positive plate of one attached to the negative plate of the other.
a) The common voltage across each capacitor is 75 V.
b) The total electrostatic energy before the capacitors are connected is 675 µJ and after the capacitors are connected is 1.40625 mJ.
c) The total voltage across the capacitors is still 75 V, but now one capacitor has a positive voltage and the other has a negative voltage.
d) The total energy stored in the system is 1.40625 mJ.
(a) The common voltage across each capacitor after they are connected in parallel is 75 V. This is because the total charge on the capacitors must remain constant.
The total charge on the capacitors is given by
Q = C1V1 + C2V2
where
Q is the charge,
C is the capacitance,
V is the voltage
When the capacitors are connected in parallel, the voltage across each capacitor becomes equal, so we can write:
Q = (C1 + C2)Vtotal.
Solving for Vtotal, we get
Vtotal = Q / (C1 + C2).
Plugging in the values, we get:
Vtotal = (5.0 × 10⁻⁶ × 50 + 2.0 × 10⁻⁶ × 100) / (5.0 × 10⁻⁶ + 2.0 × 10⁻⁶) = 75 V.
(b) The total electrostatic energy before the capacitors are connected is given by,
U = (1/2)C1V1² + (1/2)C2V2²
where
U is the energy,
C is the capacitance,
V is the voltage
Plugging in the values, we get:
U = (1/2)(5.0 × 10⁻⁶)(50)² + (1/2)(2.0 × 10⁻⁶)(100)² = 675 µJ.
After the capacitors are connected, the total energy stored in the system is given by
U = (1/2)(C1 + C2)Vtotal².
Plugging in the values, we get:
U = (1/2)(5.0 × 10⁻⁶ + 2.0 × 10⁻⁶)(75)² = 1.40625 mJ.
The discrepancy between the two energies is due to the fact that energy is lost as heat when the capacitors are connected in parallel. This is because there is a potential difference between the two capacitors which causes current to flow between them, dissipating energy as heat.
(c) When the charged capacitors are connected with the positive plate of one attached to the negative plate of the other, the voltage across each capacitor becomes -25 V. This is because the charge on each capacitor is still the same, but the polarity of one of the capacitors has been reversed, so the voltage across it is negative. The total voltage across the capacitors is still 75 V, but now one capacitor has a positive voltage and the other has a negative voltage.
(d) The total electrostatic energy before the capacitors are connected is still 675 µJ.
After the capacitors are connected, the total energy stored in the system is given by
U = (1/2)(C1 + C2)Vtotal².
Plugging in the values, we get:
U = (1/2)(5.0 × 10⁻⁶ + 2.0 × 10⁻⁶)(75)² = 1.40625 mJ.
The discrepancy between the two energies is still due to the fact that energy is lost as heat when the capacitors are connected in parallel. This is because there is a potential difference between the two capacitors which causes current to flow between them, dissipating energy as heat.
Learn more about voltage:
https://brainly.com/question/14883923
#SPJ11
When a 2.20−kg object is hung vertically on a certain light spring described by Hooke's law, the spring stretches 2.66 cm. (a) What is the force constant of the spring? N/m (b) If the 2.20−kg object is removed, how far will the spring stretch if a 1.10-kg block is hung on it? cm (c) How much work must an external agent do to stretch the same spring 7.00 cm from its unstretched position? J A block of mass 2.60 kg is placed against a horizontal spring of constant k=755 N/m and pushed so the spring compresses by 0.0750 m (a) What is the elastic potential energy of the block-spring system (in J)? 3 (b) If the block is now released and the surface is frictionless, calculate the block's speed (in m/s ) after leaving the spring. m/s
The force constant of the spring is approximately 80.45 N/m, the spring will stretch approximately 0.1349 m (13.49 cm), the external agent must do approximately 1.739 J of work to stretch the spring, the elastic potential energy to be approximately 2.678 J and the speed of the block after leaving the spring to be approximately 0.618 m/s.
(a) The force constant of the spring can be calculated using Hooke's law, which states that the force exerted by a spring is directly proportional to its displacement. The formula for the force exerted by a spring is given by
[tex]F = k * x[/tex]
, where F is the force, k is the force constant (spring constant), and x is the displacement. Given that the spring stretches 2.66 cm (0.0266 m) when a 2.20 kg object is hung on it, we can rearrange the formula to solve for the force constant:
[tex]k = F / x = (m * g) / x = (2.20 kg * 9.8 m/s^2) / 0.0266 m[/tex]
(b) If the 2.20 kg object is removed and a 1.10 kg block is hung on the spring, we can use Hooke's law to find the spring's stretch. The force exerted by the spring is equal to the weight of the block:
[tex]F = m * g = 1.10 kg * 9.8 m/s^2[/tex]
Using the formula F = k * x and rearranging it to solve for x, we have:
[tex]x = F / k = (1.10 kg * 9.8 m/s^2) / 80.45 N/m[/tex]
(c) To find the work required to stretch the spring by 7.00 cm (0.07 m), we use the formula for work:
[tex]W = (1/2) * k * x^2[/tex]
Plugging in the values, we have:
[tex]W = (1/2) * 80.45 N/m * (0.07 m)^2[/tex]
(d) The elastic potential energy of the block-spring system can be calculated using the formula:
[tex]PE = (1/2) * k * x^2[/tex]
Plugging in the values, we have:
[tex]PE = (1/2) * 755 N/m * (0.0750 m)^2[/tex]
(e) After leaving the spring, the block's speed can be determined using the conservation of mechanical energy. Since the surface is frictionless, the initial potential energy stored in the spring is converted entirely into the kinetic energy of the block:
[tex]PE = KE(1/2) * k * x^2 = (1/2) * m * v^2[/tex]
Simplifying and solving for v, we have:
[tex]v = sqrt((k * x^2) / m)v = sqrt((755 N/m * 0.0750 m)^2 / 2.60 kg)[/tex]
To learn more about force constant
brainly.com/question/29598403
#SPJ11
A mass is suspended from a string and moves with a constant upward velocity. Which statement is true concerning the tension in the string?
a. The tension is equal to the weight of the mass.
b. The tension is less than the weight of the mass
c. The tension is equal to zero.
d. The tension is greater than the weight of the mass
e. The tension is equal to the mass
The correct statement concerning the tension in the string when a mass is suspended and moves with a constant upward velocity is:
b. The tension is less than the weight of the mass.
When a mass is suspended and moves with a constant upward velocity, the tension in the string is not equal to the weight of the mass. If the tension in the string were equal to the weight of the mass (statement a), the net force acting on the mass would be zero, resulting in no upward movement. Since the mass is moving upward with a constant velocity, the tension in the string must be less than the weight of the mass.
The tension in the string is responsible for providing an upward force that counteracts the downward force of gravity acting on the mass. The tension must be slightly less than the weight of the mass to achieve a constant upward velocity. If the tension were equal to or greater than the weight of the mass, the net force would be upward, causing the mass to accelerate upward.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
Two charges 91 and 42 are placed on the x-axis. Charge 41=3.5 nC is at x=2.5 m and charge 92=-1.5 nC is at x=-2.0m. What is the electric potential at the origin? Use k=9.0x10 N·m2/C2 and 1 nC = 10°C. 0 -5.9V 5.9 V -19 V O 19v
The electric potential at the origin is approximately -5.9 V. So, the correct answer is -5.9 V.
To calculate the electric potential at the origin, we need to consider the contributions from both charges. The electric potential at a point due to a single point charge is given by the formula:
V = k * q / r
Where V is the electric potential, k is the electrostatic constant (9.0 x 10^9 N·m^2/C^2), q is the charge, and r is the distance from the charge to the point of interest.
Let's calculate the electric potential due to each charge separately:
For charge q1 = 3.5 nC at x = 2.5 m:
r1 = distance from q1 to the origin = 2.5 m
V1 = k * q1 / r1 = (9.0 x 10^9 N·m^2/C^2) * (3.5 x 10^-9 C) / (2.5 m)
For charge q2 = -1.5 nC at x = -2.0 m:
r2 = distance from q2 to the origin = 2.0 m
V2 = k * q2 / r2 = (9.0 x 10^9 N·m^2/C^2) * (-1.5 x 10^-9 C) / (2.0 m)
Now, we can calculate the total electric potential at the origin by adding the contributions from both charges:
V_total = V1 + V2
Substituting the values:
V_total = [(9.0 x 10^9 N·m^2/C^2) * (3.5 x 10^-9 C) / (2.5 m)] + [(9.0 x 10^9 N·m^2/C^2) * (-1.5 x 10^-9 C) / (2.0 m)]
Evaluating this expression, we find:
V_total ≈ -5.9 V
Therefore, the electric potential at the origin is approximately -5.9 V.
Learn more about electric potential
https://brainly.com/question/2844445
#SPJ11
Swinging rotational bar problem: Neglect friction and air drag. As shown in the figure, a uniform thin bar of mass M and length d is pivoted at one end (at point P). The bar is released from rest in a horizontal position and allows to fall under constant gravitational acceleration. Here for 0° ≤ 0 ≤ 90°. (a) How much work does the pivotal contact force apply to the system as a function of angle 0? (b) What is the angular speed of the bar as a function of angle 0? (c) What is the angular acceleration of the bar as a function of angle 0? (d) (do this last due to quite challenging unless you have too much time) What are the vertical and horizontal forces the bar exerts on the pivot as a function of angle 0?
The pivot contact force applied to the system does no work as it is perpendicular to the displacement of the bar. The angular speed of the bar as a function of angle θ is given by ω = √(2g(1 - cosθ)/d.
(a) The pivot contact force does no work on the system because it acts perpendicular to the direction of motion at all angles. Therefore, the work done by the pivotal contact force is zero.
(b)Equating the potential energy and kinetic energy, we have: mgh = (1/2)Iω^2.
Substituting the expressions for m, h, I, and ω, we can solve for the angular speed ω as a function of angle θ.
(c) The angular acceleration of the bar as a function of angle θ can be determined using torque.
The torque is equal to the moment arm (d/2) multiplied by the gravitational force (mg), so we have: τ = (d/2)mg = Iα.
(d) The exact expressions for these forces as a function of angle θ depend on the specific geometry and setup of the problem and may require additional information to solve.
Learn more about pivot here;
https://brainly.com/question/32768399
#SPJ11
A thin rod has a length of 0.285 m and rotates in a circle on a frictionless tabletop. The axis is perpendicular to the length of the rod at one of its ends. The rod has an angular velocity of 0.667 rad/s and a moment of inertia of 1.24 x 10-³ kg⋅m². A bug standing on the axis decides to crawl out to the other end of the rod. When the bug (whose mass is 5 x 10-³ kg) gets where it's going, what is the change in the angular velocity of the rod? Number Units
Given Data:
Length of thin rod = 0.285 m
Angular velocity of rod = 0.667 rad/s
Moment of inertia of rod = 1.24 x 10⁻³ kg⋅m²
Mass of bug = 5 x 10⁻³ kg
To calculate: Change in angular velocity of the rod
Formula: Iω1 = Iω2 + mr²ω2
Where, I = Moment of inertia
ω1 = Initial angular velocity
ω2 = Final angular velocity
m = Mass
r = Distance
I = 1.24 × 10⁻³ kg m²
ω1 = 0.667 rad/s
m = 5 × 10⁻³ kg
r = 0.285/2 = 0.1425 m (The distance of the bug from the centre)
Initial angular momentum of the rod and bug system, Iω1 = 1.24 × 10⁻³ × 0.667 = 8.268 × 10⁻⁴ kg⋅m²/s
When the bug starts moving to the other end of the rod, the moment of inertia of the system changes.
So, the final angular momentum of the rod and bug system will be different and will be given by the formula,
Iω2 + mr²ω2= Iω1
Where,
I = 1.24 × 10⁻³ kg m²
ω1 = 0.667 rad/s
m = 5 × 10⁻³ kg
r = 0.285 - 0.1425 = 0.1425 m (The distance of the bug from the initial position)
On substituting the values,
1.24 × 10⁻³ × ω2 + 5 × 10⁻³ × (0.1425)² × ω2
= 8.268 × 10⁻⁴ω2 (1.24 × 10⁻³ + 5 × 10⁻³ × 0.02030625)
= 8.268 × 10⁻⁴ ω2ω2
= 0.765 rad/s
Change in angular velocity = Final angular velocity - Initial angular velocity
= 0.765 - 0.667= 0.098 rad/s
Therefore, the change in angular velocity of the rod is 0.098 rad/s.
Learn more about moment of inertia here
https://brainly.com/question/14119750
#SPJ11
Two parallel wires, each carrying a current of 7 A, exert a force per unit length on each other of 8.9 x 10-5 N/m. (a) What is the distance between the wires? Part (a)
_______ m
The distance between the wires is 0.007 m, when a current of 7A is passing and force exerted per unit length on each of the two parallel wires kept at a length of 8.9x 10-5 N/m.
The formula for force per unit length between two parallel wires is given by; F = μ₀ * I₁ * I₂ * L /dWhere;μ₀ is the permeability of free space (4π × 10−⁷ N·A−²),I₁ and I₂ are the currents in the wires, L is the length of the wires, d is the distance between the wires.
Given: I₁ = I₂ = 7 A. The force per unit length, F = 8.9 x 10^-5 N/m. The permeability of free space, μ₀ = 4π × 10−⁷ N·A−²The formula becomes;8.9 x 10^-5 = 4π × 10−⁷ × 7² × L/d. On solving for d; d = 4π × 10−⁷ × 7² × L / (8.9 x 10^-5) d = 0.007 m.
Learn more about force per unit length:
https://brainly.com/question/18917488
#SPJ11
What is the length of the shortest pipe closed on one end and open at the other end that will have a fundamental frequency of 0.060 kHz on a day when the speed of sound is 340 m/s?
The length of the shortest pipe closed on one end and open at the other end that will have a fundamental frequency of 0.060 kHz on a day when the speed of sound is 340 m/s is approximately 283.3 cm.
This can be determined using the formula:
frequency = (n x speed of sound) / (2 x length)
where: n = 1 (fundamental frequency)
frequency = 0.060 kHz (60 Hz)
speed of sound = 340 m/s.
Plugging these values into the formula gives:
0.060 x 10³ Hz = (1 x 340 m/s) / (2 x length)
0.06 x 10³ Hz = 170 m/s / length
0.06 x 10³ Hz x length = 170 m/s
Dividing both sides by 0.06 x 10³ Hz:
length = 170 m/s / (0.06 x 10³ Hz)
length = 283.3 cm (rounded to one decimal place)
Therefore, the length of the shortest pipe closed on one end and open at the other end that will have a fundamental frequency of 0.060 kHz on a day when the speed of sound is 340 m/s is approximately 283.3 cm.
For more such questions on frequency visit:
https://brainly.com/question/254161
#SPJ8
A 33.70-kg object is moved through 2.00 m by a 1.80-N force acting in the same
direction as the distance it moves through. How much work is on the object during this
process?
A 33.70-kg object is moved through 2.00 m by a 1.80-N force acting in the same direction as the distance it moves through. the work done on the object during this process is 3.60 joules (J).
To determine the work done on the object, we can use the formula:
Work = Force × Distance × cos(θ)
Where the force and distance are given, and θ is the angle between the force and the direction of motion. In this case, the force and distance are in the same direction, so the angle θ is 0 degrees.
Given:
Force = 1.80 N
Distance = 2.00 m
θ = 0 degrees
Pllgging these values into the formula, we have:
Work = 1.80 N × 2.00 m × cos(0 degrees)
Since cos(0 degrees) = 1, the equation simplifies to:
Work = 1.80 N × 2.00 m × 1
Work = 3.60 N·m
Therefore, the work done on the object during this process is 3.60 joules (J).
The work done represents the energy transferred to the object as a result of the applied force over a given distance. In this case, a force of 1.80 N is exerted over a distance of 2.00 m in the same direction. As a result, the object gains 3.60 J of energy. This work can be used to change the object's speed, increase its potential energy, or perform other forms of mechanical work.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ11
A hollow metal sphere has 5 cmcm and 9 cmcm inner and outer radii, respectively, with a point charge at its center. The surface charge density on the inside surface is −250nC/m2−250nC/m2 . The surface charge density on the exterior surface is +250nC/m2+250nC/m2 .
What is the strength of the electric field at point 12 cm from the center?
Therefore, the strength of the electric field at a distance of 12 cm from the center of the sphere is 10125 NC-1.
The electric field due to a uniformly charged hollow sphere at any point outside the sphere is given by E = kQ/r2 where k is the Coulomb constant, Q is the charge on the sphere, and r is the distance from the center of the sphere to the point where electric field is to be determined.
The electric field inside the hollow sphere is zero as there is no charge inside.Let's first calculate the charge on the sphere. The charge on the sphere can be calculated by surface charge density * surface areaQ = σAσA = surface charge density * area of the sphere = σ * 4πr2So, for the inner surface, Q = -250 * 4π * 5² * 10⁻⁹ CFor the outer surface, Q = 250 * 4π * 9² * 10⁻⁹ CSo,
the total charge on the sphere isQ = -250 * 4π * 5² * 10⁻⁹ + 250 * 4π * 9² * 10⁻⁹ CQ = 18 * 10⁻⁶ CNow, we need to find the electric field at a distance of 12 cm from the center of the sphere.Electric field, E = kQ/r²E = 9 * 10^9 * 18 * 10^-6 / (0.12)²E = 10125 NC-1
Therefore, the strength of the electric field at a distance of 12 cm from the center of the sphere is 10125 NC-1.
to know more about sphere
https://brainly.com/question/28226641
#SPJ11
Two masses are attached to each other by a cable around a pulley. The mass on the left, which sits on an incline making an angle of 25 degrees with the horizontal, weighs 35.0 N; the mass kn the right, which is suspended from the cable, weighs 20N. Assume friction is negligible.
a) Make a complete free body diagram for each mass. b) Calculate the acceleration of the masses. c) Find the tension in the cable.
a) The free body diagram for the mass on the left includes the weight acting downwards and the normal force acting perpendicular to the incline. The free body diagram for the mass on the right includes the tension force acting upwards and the weight acting downwards.
b) The acceleration of the masses can be calculated using Newton's second law. The net force on each mass is equal to its mass multiplied by its acceleration.
c) The tension in the cable can be determined by considering the forces acting on the mass on the right.
a) For the mass on the left, the free body diagram includes the weight (acting vertically downwards with a magnitude of 35.0 N) and the normal force (acting perpendicular to the incline). Since the incline makes an angle of 25 degrees with the horizontal, the weight can be resolved into components parallel and perpendicular to the incline. The component parallel to the incline is 35.0 N * sin(25°), and the component perpendicular to the incline is 35.0 N * cos(25°).
For the mass on the right, the free body diagram includes the tension force (acting upwards) and the weight (acting downwards with a magnitude of 20 N). Since there is no acceleration in the vertical direction, the tension force must be equal to the weight of the right mass, which is 20 N.
b) To calculate the acceleration of the masses, we can use Newton's second law, which states that the net force on an object is equal to its mass multiplied by its acceleration. For the mass on the left, the net force acting in the direction of the incline is the component of the weight parallel to the incline, which is 35.0 N * sin(25°). For the mass on the right, the net force acting in the downward direction is the weight, which is 20 N. Since the masses are connected by a cable, they have the same acceleration. Setting up the equations:
Net force on the left mass = (35.0 N * sin(25°)) - (20 N) = (mass of left mass) * (acceleration)
Net force on the right mass = (20 N) - (mass of right mass) * (acceleration)
Solving these equations simultaneously will give the value of the acceleration.
c) To find the tension in the cable, we can consider the forces acting on the mass on the right. There are two forces: the tension force pulling upwards and the weight pulling downwards. Since there is no acceleration in the vertical direction, these two forces must be equal in magnitude. Therefore, the tension in the cable is equal to the weight of the right mass, which is 20 N.
Learn more about mass here:
https://brainly.com/question/30337818
#SPJ11
A Car with Constant Power 3 of 7 Constants | Periodic Table Part A The engine in an imaginary sports car can provide constant power to the wheels over a range of speeds from 0 to 70 miles per hour (mph). At full power, the car can accelerate from zero to 30.0 mph in time 1.00 s At full power, how long would it take for the car to accelerate from 0 to 60.0 mph ? Neglect friction and air resistance. Express your answer in seconds.
at full power, the imaginary sports car will take 4.00 s for acceleration from 0 to 60.0 mph, which is twice the time it takes to accelerate from 0 to 30.0 mph due to the constant power provided by the engine.
Since the power is constant, we have P = F1v1 = F2v2, where F1 and v1 correspond to the initial values, and F2 and v2 correspond to the final values.In this case, the car accelerates from 0 to 30.0 mph in 1.00 s, which gives us the following relation: P = F1 * 30.0 mph. Let's call this equation (1).
Now, we need to find the time it takes for the car to accelerate from 0 to 60.0 mph. We can use equation (1) again, but this time with the final velocity of 60.0 mph: P = F2 * 60.0 mph. Let's call this equation (2).Since the power is constant, we can equate equations (1) and (2) to find the ratio of the forces: F1 * 30.0 mph = F2 * 60.0 mph.Dividing both sides of the equation by F2 and rearranging, we get F1/F2 = 60.0 mph / 30.0 mph = 2.
This means that the force at full power is twice as large when accelerating from 0 to 60.0 mph compared to accelerating from 0 to 30.0 mph.Since the force is directly proportional to acceleration, the acceleration will also be twice as large. Therefore, the time it takes to accelerate from 0 to 60.0 mph will be twice the time it takes to accelerate from 0 to 30.0 mph, which is 2.00 s.To summarize, at full power, the imaginary sports car will take 4.00 s to accelerate from 0 to 60.0 mph, which is twice the time it takes to accelerate from 0 to 30.0 mph due to the constant power provided by the engine.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
In Oersted's experiment, suppose that the compass was 0.15 m from the current-carrying wire. Part A If a magnetic field of one third the Earth's magnetic field of 5.0×10 −5
T was required to give a noticeable deflection of the compass needle, what current must the wire have carried? Express your answer using two significant figures. A single circular loop of radius 0.16 m carries a current of 3.3 A in a magnetic field of 0.91 T. Part A What is the maximum torque exerted on this loop? Express your answer using two significant figures. A rectangular loop of 270 turns is 31 cm wide and 18 cm high. Part A What is the current in this loop if the maximum torque in a field of 0.49 T is 24 N⋅m ? Express your answer using two significant figures.
The current in this loop is approximately 13.5 A for oersted's experiment.
Part A: Given: The magnetic field of one third the Earth's magnetic field is[tex]5.0 * 10^-5 T[/tex].The distance between the compass and the current-carrying wire is 0.15 m.Formula:
Magnetic field due to current at a point is [tex]`B = μ₀I/2r`[/tex].Here, μ₀ is the permeability of free space, I is the current and r is the distance between the compass and the current-carrying wire.
Now, `B = [tex]5.0 * 10^-5 T / 3 = 1.67 * 10^-5 T`.[/tex]
To find the current in the wire, `B =[tex]μ₀I/2r`.I[/tex]= 2Br / μ₀I =[tex]2 * 1.67 ( 10^-5 T × 0.15 m / (4\pi * 10^-7 T·m/A)I[/tex]≈ 1.26 ASo, the current in the wire must be 1.26 A (approximately).
Part A: Given: A single circular loop of radius is 0.16 m.The current passing through the loop is 3.3 A.The magnetic field is 0.91 T.Formula:
The maximum torque on a current-carrying loop of area A placed in a magnetic field of strength B is given by the expression `τ = BIAN sin θ`.Here, I is the current, A is the area of the loop, N is the number of turns, θ is the angle between the magnetic field and the normal to the plane of the coil and B is the magnetic field.[tex]τ = BIAN sin θ = B(NIA)sin θ[/tex]
The maximum torque is obtained when sinθ = 1.Maximum torque,τmax =[tex]B(NIA)τmax = (0.91 T)(π(0.16 m)²)(3.3 A)τmax[/tex]≈ 2.6 N.m.
So, the maximum torque exerted on this loop is approximately 2.6 N.m.Part A: Given: A rectangular loop of 270 turns is 31 cm wide and 18 cm high.
The magnetic field is 0.49 T.The maximum torque is 24 N.m.Formula: The maximum torque on a current-carrying loop of area A placed in a magnetic field of strength B is given by the expression [tex]`τ = BIAN sin θ`.[/tex]
Here, I is the current, A is the area of the loop, N is the number of turns, θ is the angle between the magnetic field and the normal to the plane of the coil and B is the magnetic field for oersted's experiment.
[tex]τ = BIAN sin θ = B(NIA)sin θ[/tex]
The maximum torque is obtained when sinθ = 1.
Maximum torque,τmax = B(NIA)τmax = B(NIA) = [tex]NIA²Bτmax[/tex] = [tex]N(I/270)(0.31 m)(0.18 m)²(0.49 T)τmax[/tex]≈ 1.78I N.m24 N.m = 1.78I24/1.78 = II ≈ 13.5 A
Therefore, the current in this loop is approximately 13.5 A.
Learn more about oersted's experiment here:
https://brainly.com/question/32264322
#SPJ11
A 1C charge is originally a distance of 1m from a 0.2C charge, but is moved to a distance of 0.1 m. What is the change in electric potential energy? OJ -9.0x10^9 J 1.6x10^10 J 9.0x10^9 J
Therefore, the change in electric potential energy is $1.62 \times 10^{10} J$, which is approximately $1.6 \times 10^{10} J$.Hence, the correct option is $1.6 \times 10^{10} J$.
Electric potential energy is calculated using the formula :$E_{p}=k \frac{q_{1} q_{2}}{r}$where,$k$ is Coulomb's constant, $9 \times 10^9 Nm^2/C^2$$q_1$ is the magnitude of charge 1$q_2$ is the magnitude of charge 2$r$ is the distance between the chargesFrom the above formula,$E_{p} \propto \frac{1}{r}$ which implies that when the distance between the two charges decreases, the electric potential energy will increase.
The change in electric potential energy, $\Delta E_{p}$ can be calculated using the formula,$\Delta E_{p} = E_{p final} - E_{p initial}$Given,$q_{1} = 1C$$q_{2} = 0.2C$$r_{initial} = 1m$$r_{final} = 0.1m$Let's find the initial electric potential energy:$E_{p initial} = k \frac{q_{1} q_{2}}{r_{initial}}$$E_{p initial} = 9 \times 10^9 \frac{(1)(0.2)}{1}$$E_{p initial} = 1.8 \times 10^9 J$Now,
let's find the final electric potential energy:$E_{p final} = k \frac{q_{1} q_{2}}{r_{final}}$$E_{p final} = 9 \times 10^9 \frac{(1)(0.2)}{0.1}$$E_{p final} = 1.8 \times 10^{10} J$The change in electric potential energy is $\Delta E_{p} = E_{p final} - E_{p initial}$$\Delta E_{p} = (1.8 \times 10^{10}) - (1.8 \times 10^9)$$\Delta E_{p} = 1.62 \times 10^{10} J$
Therefore, the change in electric potential energy is $1.62 \times 10^{10} J$, which is approximately $1.6 \times 10^{10} J$.Hence, the correct option is $1.6 \times 10^{10} J$.
to know more about potential
https://brainly.com/question/16705765
#SPJ11
2) A ball is attached to one end of a wire, the other end being fastened to the ceiling. The wire (1.3 m long), is held horizontal, and the ball is released from rest (see the drawing). It swings down
A ball attached to one end of a wire is held horizontally and released from rest. The ball will swing down due to the force of gravity and the tension in the wire, forming a pendulum-like motion.
When the ball is released from rest, it will experience the force of gravity pulling it downwards. As the ball swings down, the tension in the wire provides the centripetal force necessary to keep the ball moving in a circular arc. This motion resembles that of a pendulum.
As the ball swings downward, its potential energy decreases while its kinetic energy increases. At the lowest point of the swing, all the potential energy is converted to kinetic energy. As the ball swings back upwards, the tension in the wire acts as the centripetal force, causing the ball to decelerate. At the highest point of the swing, the ball momentarily comes to a stop before reversing direction and swinging back down again.
The motion of the ball follows the principles of conservation of energy and the laws of motion. The exact behavior and characteristics of the swing, such as the period and frequency, can be analyzed using concepts from classical mechanics and trigonometry.
Learn more about pendulum-like motion here:
https://brainly.com/question/30641862
#SPJ11
Electric Field a the Mid-Point of Two Charges The electric Field midway between two equal but opposite point charges is 1920 N/C, and the distance between the charges is 11.4 cm. What is the magnitude of the charge on each?
Given:
Electric field midway between two equal but opposite point charges is 1920 N/C. Distance between the charges is 11.4 cm.
Let q be the magnitude of the charge on each point charge.
Using Coulomb's law, the electric field E due to a point charge q at a distance r from it is given by;
E = kq/r
where k = 9 × 10^9 Nm²/C² is Coulomb's constant.
It follows that the electric field E at the midpoint between the two charges is given by;
E = (1/4πε₀) [2q/(11.4/2)²] = 1920 N/C
Where ε₀ is the permittivity of free space.
Evaluating for q;
q = E(11.4/2)²(4πε₀)/2
= 7.7 × 10^-6C (rounded off to 2 significant figures)
Therefore, the magnitude of the charge on each point charge is 7.7 × 10^-6 C.
What is an electric field?
An electric field is defined as a field of force surrounding an electrically charged particle that exerts a force on another charged particle that comes within its field of influence.
Learn more about permittivity of free space here
https://brainly.com/question/30403318
#SPJ11
A parallel plate capacitor has a capacitance of 7μF when filled with a dielectric. The area of each plate is 1.5 m² and the separation between the plates is 1×10⁻⁵ m. What is the dielectric constant of the dielectric? a. 2.1 b. 1.9 c. 6.7
d. 5.3
The dielectric constant is option c, 6.7.
To find the dielectric constant of the dielectric material in the parallel plate capacitor, we can use the formula for capacitance with a dielectric:
C = (ε₀ * εᵣ * A) / d,
where:
C is the capacitance,
ε₀ is the vacuum permittivity (8.854 × 10⁻¹² F/m),
εᵣ is the relative permittivity or dielectric constant,
A is the area of each plate, and
d is the separation between the plates.
We are given:
C = 7 μF = 7 × 10⁻⁶ F,
A = 1.5 m², and
d = 1 × 10⁻⁵ m.
Rearranging the formula, we have:
εᵣ = (C * d) / (ε₀ * A).
Substituting the given values, we can calculate the dielectric constant:
εᵣ = (7 × 10⁻⁶ F * 1 × 10⁻⁵ m) / (8.854 × 10⁻¹² F/m * 1.5 m²).
Calculating the above expression, we find:
εᵣ ≈ 6.66.
Therefore, the dielectric constant of the dielectric material is approximately 6.7.
Therefore, the correct option is c. 6.7.
learn more about dielectric constant;
https://brainly.com/question/28592099
#SPJ11