Arjuna stood at Krishna feet with " rgppsmk Arjuna aet "arms folded what aspect of Arjuna character does this gesture show​

Answer:

To prepare 250 ml of 0.15 M KNO3 solution, you will need to follow these steps:

Calculate the amount of KNO3 needed:

Molarity (M) = moles of solute/liters of solution

Rearranging the formula, moles of solute = M x liters of solution

Moles of KNO3 needed = 0.15 M x 0.25 L = 0.0375 moles

Calculate the mass of KNO3 needed:

Mass = moles x molar mass

The molar mass of KNO3 is 101.1 g/mol

Mass of KNO3 needed = 0.0375 moles x 101.1 g/mol = 3.79 g

Dissolve the calculated amount of KNO3 in distilled water:

Weigh out 3.79 g of KNO3 using a digital balance

Add the KNO3 to a clean and dry 250 ml volumetric flask

Add distilled water to the flask until the volume reaches the 250 ml mark

Cap the flask and shake it well to ensure the KNO3 is completely dissolved

Verify the concentration of the solution:

Use a calibrated pH meter or a spectrophotometer to measure the concentration of the solution

Adjust the volume of distilled water or the mass of KNO3 as needed to achieve the desired concentration

It is important to note that KNO3 is a salt that can be hazardous if ingested or inhaled in large quantities. Therefore, it is recommended to handle it with care and wear appropriate personal protective equipment.

Explanation:

Answer:

B. nitrogen-fixing bacteria

Explanation:

Nitrogen is converted from atmospheric nitrogen (N2) into usable forms such as NO2-,

In a process known as fixation. The majority of nitrogen is fixed by bacteria, most of which are symbiotic with plants.

Recently fixed ammonia is then converted to biologically useful forms by specialized bacteria.

Answer: The answer is incus

Answer:0.802atm

Explanation:

To convert pressure from millimeters of mercury (mmHg) to atmospheres (atm), you can use the conversion factor:

1 atm = 760 mmHg

So, to convert the pressure of the light bulb from mmHg to atm, divide the given pressure by 760:

Pressure (in atm) = 610 mmHg / 760 mmHg

Pressure (in atm) ≈ 0.802 atm

Therefore, the pressure inside the light bulb is approximately 0.802 atmosphe

Answer:Electrical Conductivity,soluble

Explanation:

Salt is a non-magnetic solid and is soluble in water. Sand is a non-magnetic solid and is insoluble in water.

Electrical Conductivity: Salt is an electrolyte and conducts electricity when dissolved in water or in a molten state. This is because salt dissociates into ions (Na+ and Cl-) that can carry electric current. In contrast, sand is a covalent compound and does not conduct electricity, as it does not dissociate into ions in the same way as salt. Sand is considered an insulator in terms of electrical conductivity.

According to the Kinetic Molecular Theory, gases are composed of tiny particles called molecules that are in constant random motion. This motion is influenced by their kinetic energy. When a gas is confined to a specific space, the molecules collide with each other and the walls of the container, creating pressure.

When a gas diffuses, it means that the gas molecules spread out and mix with other gases or move to areas of lower concentration. This rapid diffusion can be explained by three key factors:

1. Continuous motion: Gas molecules are in constant motion due to their kinetic energy. This random motion causes them to collide with each other and move in different directions.

2. Negligible intermolecular forces: Gases have weak intermolecular forces compared to liquids and solids. The molecules are far apart, and the attractive forces between them are relatively weak. As a result, they are free to move independently.

3. Empty space: Gases occupy a larger volume compared to their actual molecular size. The majority of the space within a gas is empty, allowing the molecules to move easily and quickly.

Due to these factors, gas molecules can rapidly diffuse because they are constantly moving, experience weak intermolecular forces, and have ample space to spread out and mix with other gases.

For more questions on Kinetic Molecular Theory, click on:

https://brainly.com/question/134712

#SPJ8

The compound that is shown as X can be seen in the option labelled C

The process of esterification involves the condensation of an alcohol (or phenol) with an acid to produce an ester. To create the ester bond, the water molecule must be removed from the alcohol and acid (dehydration).

Usually, an acid catalyst is used to catalyze the reaction, which makes it easier to remove water and encourages the creation of the ester. The acid catalyst aids in protonating the acid's carbonyl oxygen, which increases its electrophilicity and makes it more vulnerable to alcohol's nucleophilic attack.

Learn more about esterification:https://brainly.com/question/31118260

#SPJ1

Answer:

Explanation:

The decay of a single nucleus is random. In groups, behavior is predictable (you can predict half-life), but we can't predict when an atom will decay.

The combustion of 4.7 kg of pure octane ([tex]C_8H_{18[/tex]) produces approximately 15 kg of carbon dioxide ([tex]CO_2[/tex]).

1. Start by writing the balanced equation for the combustion of octane ([tex]C_8H_{18[/tex]):

  [tex]C_8H_{18[/tex] + 12.5O2 → [tex]8CO_2[/tex] + [tex]9H_2O[/tex]

  This equation shows that for every 1 mole of octane burned, 8 moles of carbon dioxide and 9 moles of water are produced.

2. Determine the molar mass of octane ([tex]C_8H_{18[/tex]):

  The molar mass of carbon (C) is approximately 12.01 g/mol.

  The molar mass of hydrogen (H) is approximately 1.008 g/mol.

  Calculating the molar mass of octane: (8 * 12.01 g/mol) + (18 * 1.008 g/mol) ≈ 114.23 g/mol.

3. Calculate the number of moles of octane in 4.7 kg:

  Number of moles = mass (in grams) / molar mass

  Moles of octane = (4.7 kg * 1000 g/kg) / 114.23 g/mol ≈ 41.11 mol

4. Determine the number of moles of carbon dioxide produced:

  From the balanced equation, we know that for every mole of octane burned, 8 moles of carbon dioxide are produced.

  Moles of carbon dioxide = 41.11 mol octane * 8 mol CO2 / 1 mol octane ≈ 328.88 mol

5. Calculate the mass of carbon dioxide produced:

  Mass = moles * molar mass

  Mass of carbon dioxide = 328.88 mol * (12.01 g/mol + 2 * 16.00 g/mol) ≈ 7,883.51 g ≈ 7.88 kg

6. Express the answer using two significant figures:

  The mass of carbon dioxide produced is approximately 7.88 kg when 4.7 kg of octane is burned.

For more such questions on carbon dioxide, click on:

https://brainly.com/question/21256960

#SPJ8

Answer:

A liquid of unknown composition: Unknown liquid

A liquid of known composition: Known liquid

A solid-liquid mixture of unknown composition: Unknown solid-liquid mixture

A solid of known composition: Known solid

Answer:

Explanation: First, convert the mass of graphite from milligrams (mg) to grams (g).

As 1,000 milligrams in 1 gram

therefore,

300 mg = 300/1000 = 0.3 grams

Now, we can use the molar mass of carbon to calculate the number of moles. We divide the mass of the sample by the molar mass:

Number of moles = Mass (g) / Molar mass (g/mol)

Number of moles = 0.3 g / 12.01 g/mol

Number of moles ≈ 0.02498 moles (rounded to five decimal places)

Therefore, there are approximately 0.02498 moles of carbon in 300 mg of graphite.

Answer:A. abandoned realism in favor of conveying feelings of anxiety and instability.

Rather than depicting the habitual esthetical artworks charged with beauty standards, artists from this period begin to express in works representing the struggles of the time. Some went far to represent distorted figures

Explanation:

Answer:

BaCrO₄

Explanation:

Bariu(Ba) + Chromium(Cr) + 4 Oxygen( O₄)

Answer:

BaCrO4.

Explanation:

Barium chromate is a yellow, crystalline compound, BaCrO4, used as a pigment (barium yellow).

- Separate elements/compounds;

  Barium is a whitish, malleable, active, divalent, metallic element, occurring in combination chiefly as barite or as witherite. Symbol: Ba; atomic weight: 137.34, atomic number: 56; specific gravity 3.5 at 20°C.

Chromate is a salt of chromic acid, as potassium chromate, K2CrO4.

Chromic acid is a hypothetical acid, H2CrO4, known only in the solution or in the form of salts.  

These substances have dispersed particles that are large enough to scatter light, making the beam visible. Therefore, out of the options provided, a mixture that scatters light is an example of a colloid. Option B)

A colloid is a type of mixture in which particles are dispersed throughout a medium, creating a homogeneous appearance. Unlike solutions, where the particles are completely dissolved, and suspensions, where the particles settle out, colloids have particles that are larger than those in solutions but smaller than those in suspensions. One characteristic of colloids is that they can scatter light due to the size of the particles. This scattering of light is known as the Tyndall effect. Examples of colloids include milk, fog, and aerosol sprays. These substances have dispersed particles that are large enough to scatter light, making the beam visible. Therefore, out of the options provided, a mixture that scatters light is an example of a colloid. Therefore option B) is correct

For more question on mixture

https://brainly.com/question/24647756

#SPJ8

Note Complete Question

which is an example of a colloid?

a mixture that settles out,

b mixture that scatters light,

c mixture that is separated by filtration,  

d salt and water mixture?

Hydroelectric Power: Harnessing Nature’s Energy

Let's imagine a huge wall blocking a river. On one side, the water level is high, and on the other, it's low. Now imagine that this wall has a mechanism to let the water flow from the high side to the low side, and in the process, it produces electricity. This is, in simple terms, how a hydroelectric power plant works!

Hydroelectric power plants work by using water to turn turbines that generate electricity. They are often built with dams, which are like giant walls across rivers. The dams are essential because they raise the water level on one side, creating a reservoir or a lake. This reservoir stores a huge amount of potential energy. When the water is released, it flows down through turbines, and this energy is converted into mechanical energy. The turbines are connected to generators, which turn the mechanical energy into electricity.

Now, let's talk about some of the environmental and economic benefits of hydroelectricity. It's like hitting two birds with one stone! Firstly, hydroelectric power doesn’t produce greenhouse gases or pollutants during operation, which means it’s much cleaner for our air compared to coal or gas power plants. For example, the Itaipu Dam in Brazil and Paraguay is a great case study. It generates so much electricity from hydro power that it reduces CO2 emissions equivalent to what 21.6 million cars would produce in a year!

Another economic benefit is that the electricity produced is usually cheaper in the long run. Hydroelectric plants have high upfront costs but can operate for a very long time. The Hoover Dam in the USA, built in the 1930s, still generates electricity at low cost, providing power to millions of homes.

However, there is no such thing as a free lunch. There are also environmental and cultural disadvantages to hydroelectric power. When a dam is built, the area behind it gets flooded. This means that plants, animals, and even people's homes can be submerged. For instance, the Three Gorges Dam in China displaced over 1.2 million people and flooded archaeological sites. Additionally, dams can impact fish populations. In the United States, salmon populations in the Pacific Northwest have decreased partly because dams block their migration routes.

Dams also affect the natural flow of rivers, which can have far-reaching consequences for ecosystems. The Aswan Dam in Egypt, for example, has reduced the fertility of the Nile Delta because the nutrients that used to flow down the river and enrich the soil are now trapped behind the dam.

In conclusion, hydroelectric power is an incredible way to generate clean energy, but it's important to weigh these benefits against the environmental and cultural costs. Finding ways to mitigate the negative impacts or looking at alternative renewable energy sources can help us move towards a more sustainable future.

*Keep in mind, you should paraphrase this or use it as your frame of reference, otherwise it would be plain plagiarism.*

The power of water has been harnessed by humans for centuries to generate electricity, and hydroelectric power is a renewable and sustainable energy source that has been used for many years. In this essay, we will explore the inner workings of hydroelectric power plants, the advantages and disadvantages of this energy source, and the potential it holds for a sustainable energy future. Hydroelectric power plants use the force of falling water to turn turbines, generating electricity through a process that is clean and efficient. Dams are built as part of large hydropower plants to control the flow of water and store it for later use. When the water is released from the dam, it flows through a penstock and turns the turbine, which generates electricity. Moreover, hydropower plants can be easily adjusted to meet peak demand for electricity, making them a valuable source of reliable and flexible energy.

One of the main advantages of hydroelectricity is its sustainability. Water is a renewable resource that is constantly replenished by the water cycle, making hydropower an almost infinite source of energy. Additionally, hydropower plants can provide a range of ecosystem services, such as flood control, irrigation, and recreation. For example, the Itapúa Dam on the Paraná River in Brazil provides water for irrigation, supports local fishing industries, and generates electricity for millions of homes. Nevertheless, there are also environmental and cultural drawbacks to hydropower. Large dams can cause significant harm to river ecosystems, altering the natural flow of water and affecting the habitats of fish and other aquatic species. Moreover, the construction of dams can displace local communities and destroy cultural heritage sites. For example, the construction of the Three Gorges Dam in China has caused the displacement of over one million people and has destroyed numerous cultural heritage sites.

Despite these challenges, the potential of hydroelectric power for a sustainable energy future cannot be ignored. As we move towards a world that is less reliant on fossil fuels, hydropower can play a critical role in providing clean, renewable, and reliable energy. Furthermore, new technologies are being developed to reduce the environmental impact of hydropower, such as fish ladders and other measures to support fish migration. Furthermore, hydroelectric power is a powerful and sustainable source of energy that harnesses the power of falling water to generate electricity. Although there are challenges associated with hydropower, such as the environmental and cultural impacts of large dams, the benefits of this energy source are significant. As we continue to seek sustainable solutions to our energy needs, hydroelectric power will undoubtedly play a critical role in meeting our energy demands while also protecting the environment and supporting economic growth.

Thank you, I genuinely hope this helps.

Glycolysis and photosynthesis are necessary processes: glycolysis produces ATP for energy, while photosynthesis converts sunlight into glucose and oxygen. They are similar in energy transformation and enzymatic reactions but differ in organisms, oxygen/light dependence, and cellular location.

Glycolysis and photosynthesis are both necessary fundamental processes due to their vital roles in energy production and carbon fixation, respectively. Glycolysis is a central pathway in cellular respiration that breaks down glucose to produce ATP, the main energy currency of cells.

It occurs in the cytoplasm of all living organisms and is essential for the generation of energy required for various cellular activities. On the other hand, photosynthesis is the process by which plants, algae, and some bacteria convert sunlight, water, and carbon dioxide into glucose and oxygen. It takes place in the chloroplasts of plants and is responsible for oxygen production and the primary source of organic carbon in ecosystems.

In terms of similarities, both glycolysis and photosynthesis involve the transformation of energy. Glycolysis converts the chemical energy stored in glucose molecules into ATP, while photosynthesis converts solar energy into chemical energy in the form of glucose.

Both processes also involve multiple enzymatic reactions and occur in different cellular compartments (cytoplasm for glycolysis and chloroplasts for photosynthesis). Additionally, they are essential for the survival and functioning of organisms, as glycolysis provides the energy needed for cellular processes, and photosynthesis is responsible for maintaining oxygen levels and providing organic carbon for food chains.

However, there are significant differences between the two processes. Glycolysis occurs in all living organisms, including plants, animals, and microorganisms, while photosynthesis is primarily limited to plants, algae, and some bacteria.

Glycolysis is an anaerobic process that does not require oxygen, whereas photosynthesis is an aerobic process that relies on the presence of light and produces oxygen as a byproduct. Furthermore, glycolysis occurs in the cytoplasm, which is present in all cells, while photosynthesis occurs in specialized organelles called chloroplasts, which are only found in plant cells.

In summary, both glycolysis and photosynthesis are crucial fundamental processes. Glycolysis generates ATP for cellular energy, while photosynthesis converts solar energy into glucose and oxygen. They share similarities in energy transformation and enzymatic reactions but differ in their occurrence across organisms, dependence on oxygen and light, and cellular location.

For more such questions on photosynthesis, click on:

https://brainly.com/question/8401042

#SPJ8

Answer:

true

Explanation:

atomic nuclei consist of electrically positive proton and electrically neutral neutrons. These are held together by the strongest known fundamental force, called the strong force.

The nucleus of every atom contains protons. This statement is true.

Protons are positively charged subatomic particles, which are one of the fundamental components of an atom, along with neutrons and electrons. Protons play a crucial role in determining the identity of an element. They determine the atomic number of an element.

The atomic number is used to arrange elements in the periodic table and is used as a basis for defining the number of electrons in an atom of that element. The arrangement and combination of protons, along with neutrons, determine the atom's mass and stability.

In summary, protons are an essential component of the nucleus in all atoms, making the statement true.

For more information on the Atomic Structure, click:

https://brainly.com/question/1876441

Diorite is an igneous rock(Option A). Igneous rocks are formed from the solidification of molten materials, such as magma or lava.

Diorite specifically forms when molten lava cools and solidifies in the Earth's crust. During the cooling process, the minerals in the molten lava crystallize and combine to form the distinctive composition of diorite. It is composed mainly of plagioclase feldspar, biotite, hornblende, and/or pyroxene minerals. The presence of these crystals gives diorite its characteristic speckled appearance.

Unlike sedimentary rocks, which are formed through the deposition and compaction of sediments, diorite does not originate from the accumulation of loose particles. Similarly, it is not a metamorphic rock, which results from the transformation of pre-existing rocks due to intense heat and pressure.

In summary, diorite is an igneous rock formed through the cooling and solidification of molten lava in the Earth's crust. Its crystalline structure and composition make it distinct from sedimentary and metamorphic rocks.

For more questions on igneous rock, click on:

https://brainly.com/question/20538428

#SPJ8

The energy of combustion for one mole of butane to be approximately 2888.81 kJ/mol.

To calculate the energy of combustion for one mole of butane (C4H10), we need to use the information provided and apply the principle of calorimetry.

First, we need to convert the mass of the butane sample from grams to moles. The molar mass of butane (C4H10) can be calculated as follows:

C: 12.01 g/mol

H: 1.01 g/mol

Molar mass of C4H10 = (12.01 * 4) + (1.01 * 10) = 58.12 g/mol

Next, we calculate the moles of butane in the sample:

moles of butane = mass of butane sample / molar mass of butane

moles of butane = 0.367 g / 58.12 g/mol ≈ 0.00631 mol

Now, we can calculate the heat released by the combustion of the butane sample using the equation:

q = C * ΔT

where q is the heat released, C is the heat capacity of the calorimeter, and ΔT is the change in temperature.

Given that the heat capacity of the bomb calorimeter is 2.36 kJ/°C and the change in temperature is 7.73 °C, we can substitute these values into the equation:

q = (2.36 kJ/°C) * 7.73 °C = 18.2078 kJ

Since the heat released by the combustion of the butane sample is equal to the heat absorbed by the calorimeter, we can equate this value to the energy of combustion for one mole of butane.

Energy of combustion for one mole of butane = q / moles of butane

Energy of combustion for one mole of butane = 18.2078 kJ / 0.00631 mol ≈ 2888.81 kJ/mol

Therefore, the energy of combustion for one mole of butane is approximately 2888.81 kJ/mol.

In conclusion, by applying the principles of calorimetry and using the given data, we have calculated the energy of combustion for one mole of butane to be approximately 2888.81 kJ/mol.

For more questions on molar mass, click on:

https://brainly.com/question/837939

#SPJ8

Answer:

the density of the helium gas would be approximately 0.369 g/L when the balloon is placed in the freezer at -10°C and a pressure of 2.0 atm.

Explanation:

To calculate the density of helium gas in the balloon after it is placed in the freezer at -10°C and a pressure of 2.0 atm, we can use the ideal gas law and the relationship between density, molar mass, and molar volume.

First, let's find the initial molar volume of the helium gas using the given conditions:

PV = nRT

Where:

P = pressure = 1.0 atm

V = volume = 0.75 L

n = number of moles = 0.0303 mol

R = ideal gas constant = 0.0821 L·atm/(mol·K)

T = temperature in Kelvin

To convert Celsius to Kelvin, we add 273.15:

T = 30°C + 273.15 = 303.15 K

Using the ideal gas law, we can calculate the initial molar volume:

V_initial = (n * R * T) / P

V_initial = (0.0303 mol * 0.0821 L·atm/(mol·K) * 303.15 K) / 1.0 atm

V_initial ≈ 0.754 L

Next, we can calculate the molar mass of helium (He) using the atomic mass of helium:

Molar mass of He = 4.003 g/mol

Now we can calculate the initial density of the helium gas in the balloon:

Initial density = (mass of helium gas) / (volume of helium gas)

Initial density = (0.0303 mol * 4.003 g/mol) / 0.754 L

Initial density ≈ 0.161 g/L

Now let's find the final density of the helium gas when the balloon is placed in the freezer at -10°C and a pressure of 2.0 atm.

We will use the ideal gas law again with the new conditions:

P_final = 2.0 atm

T_final = -10°C + 273.15 = 263.15 K (converted to Kelvin)

To find the final molar volume, we rearrange the ideal gas law equation:

V_final = (n * R * T_final) / P_final

V_final = (0.0303 mol * 0.0821 L·atm/(mol·K) * 263.15 K) / 2.0 atm

V_final ≈ 0.328 L

Finally, we can calculate the final density of the helium gas:

Final density = (mass of helium gas) / (volume of helium gas)

Final density = (0.0303 mol * 4.003 g/mol) / 0.328 L

Final density ≈ 0.369 g/L

In the solid state of matter, particles, such as atoms, ions, or molecules, are closely packed and held together by strong intermolecular forces, such as ionic bonds, metallic bonds, or covalent bonds.

In a solid, particles have enough energy to vibrate around fixed positions but do not have enough energy to overcome the attractive forces between them. These attractive forces, also known as cohesive forces, arise from the electrostatic interactions between particles or the sharing of electrons in covalent bonds.

The energy of the particles in a solid is typically much lower than in the liquid or gaseous states, resulting in a fixed arrangement of particles.

The movement of particles in a solid is characterized by vibrations or oscillations around their equilibrium positions.

These vibrations occur due to the thermal energy present in the solid, but the particles remain relatively fixed in their positions due to the strong attractive forces. The amplitude of the vibrations increases with increasing temperature, as the particles gain more thermal energy.

However, the particles in a solid do not have enough energy to break the intermolecular bonds and move freely throughout the entire solid. Instead, they can only move within their local vicinity or lattice positions.

This restricted movement is what distinguishes the solid state from the liquid or gaseous states, where particles have enough energy to overcome intermolecular forces and move more freely.

For more such questions on intermolecular forces visit:

https://brainly.com/question/12243368

#SPJ8

The bullet has a kinetic energy of approximately 344.45 joules (J), while the ocean liner has a kinetic energy of approximately 676,200,000 joules (J). As we can see, the ocean liner has significantly more kinetic energy than the bullet due to its larger mass and velocity.

To calculate the kinetic energy of an object, we use the formula:

Kinetic Energy (Ek) = 0.5 * mass * velocity^2

Let's calculate the kinetic energy for both the bullet and the ocean liner:

For the bullet:

Mass (m) = 0.0020 kg

Velocity (v) = 415 m/s

Ek-bullet = 0.5 * 0.0020 kg * (415 m/s)^2

Ek-bullet = 0.5 * 0.0020 kg * 172225 m^2/s^2

Ek-bullet = 344.45 J

For the ocean liner:

Mass (m) = 6.9 * 10^7 kg

Velocity (v) = 14 m/s

Ek-ocean liner = 0.5 * (6.9 * 10^7 kg) * (14 m/s)^2

Ek-ocean liner = 0.5 * (6.9 * 10^7 kg) * 196 m^2/s^2

Ek-ocean liner = 676200000 J

Therefore, the bullet has a kinetic energy of approximately 344.45 joules (J), while the ocean liner has a kinetic energy of approximately 676,200,000 joules (J). As we can see, the ocean liner has significantly more kinetic energy than the bullet due to its larger mass and velocity.

For more question on energy

https://brainly.com/question/30083274

#SPJ8

The balanced chemical equation for the decomposition of aspirin (acetylsalicylic acid) is:

[tex]2C_{9}H_{8}O_{4} (aspirin) → 2C_{7}H_{6}O_{3} (salicylic acid) + 2CO_{2} (Carbon dioxide) + H_{2}O (water)[/tex]

In this reaction, the aspirin molecule breaks down into salicylic acid, carbon dioxide, and water. The reaction is typically catalyzed by heat or exposure to acidic or basic conditions.

Aspirin, or acetylsalicylic acid, contains ester functional groups that can undergo hydrolysis. Under suitable conditions, the ester bond in aspirin is cleaved, leading to the formation of salicylic acid, which is the primary decomposition product. Additionally, carbon dioxide and water are released as byproducts of the reaction.

The balanced equation shows that for every two molecules of aspirin, two molecules of salicylic acid, two molecules of carbon dioxide, and one molecule of water are formed. Understanding the decomposition of aspirin is important in pharmaceutical and chemical industries to ensure the stability and shelf-life of the compound, as well as to study its breakdown products and potential side reactions.

Know more about aspirin here:

https://brainly.com/question/13533428

#SPJ8

Answer: The Fundamental units are as follows:

Explanation:

A fundamental unit is a tool used for measurement of a base quantity.

Velocity: It is defined as rate of displacement. Therefore units of displacement and time are involved the units of displacement are same as that of distance i.e. metre and that of time are second. therefore the units of velocity are metre per second.

Acceleration: It is defined as rate of change of velocity. Therefore units of acceleration involve velocity and time. The units of velocity Re metre per second and time is second. Therefore units of acceleration are meter's per second².

Work:  It is defined as product of force and displacement. Therefore units of work involve Force and displacement i.e. distance. Therefore units of work are kgm²/sec².

Pressure: It is Force per unit area. Therefore units of Pressure are kg/ms².

Power: It is Work/Time. Therefore units of power are kgm²/sec³.

Density: It is Mass/Volume. Therefore units of density are kg/m³.

Volume: The units of volume are m³.

Force: It is product of mass and acceleration. Therefore units of force are m/sec².

For Further information on Fundamental units

https://brainly.com/question/33348059

Answer: a. meters per second(m/s) b. meters per second squared(m/s2)

c. Joule(J) d.Pascal(Pa) e. Watt(W) f. kilograms per meter cubed(kg/m3)

g. meter cube(m3) h.Newton(N)

Explanation: To find out the fundamental units of the quantities we need to use the SI units of the Fundamental Physical Quantities they are as follows:

Mass:- kg

Length:-m

time:-s

Now we know Velocity = displacement/time which means its units will be m/s,

Acceleration = velocity/time hence its units are m/s2,

Work = force/displacement here units of force is N, therefore, units of work are N/m which is known as Joule(J),

Pressure = force/area where units of area in m2 thus units of pressure are N/m2 which is known as Pascals(Pa),

Power = work/time, therefore, its units are J/s which is known as Watts(W),

density =mass/volume here units of volume are m3 therefore units of density are kg/m3

Volume is a derived unit from length and its units are m3, Force=mass*acceleration thus its units are kg*m/s2 which is known as Newton(N)

Answer:

The kinetic energy of the electron is approximately 4.45 × 10^-15 J, assuming that the electron is moving at a velocity of about 1.198 × 10^7 m/s.

Explanation:

We can use the formula for the energy of a photon of electromagnetic radiation:

E = hc/λ

where h is Planck's constant (6.626 × 10^-34 J·s), c is the speed of light (2.998 × 10^8 m/s), and λ is the wavelength of the radiation.

Since the wavelength of the electron in this question is equivalent to the wavelength of X-ray radiation, we can assume that the energy of the electron is equal to the energy of a photon of X-ray radiation with the same wavelength.

So, we can calculate the energy of the photon:

E = hc/λ = (6.626 × 10^-34 J·s × 2.998 × 10^8 m/s)/(0.445 × 10^-9 m) ≈ 4.45 × 10^-15 J

Since the electron has the same energy as the photon, its kinetic energy is also approximately 4.45 × 10^-15 J.

To convert the mass of the electron from grams to kilograms, we divide by 1000:

mass of electron = 9.11 × 10^-28 kg

Using the formula for kinetic energy:

KE = (1/2)mv^2

where m is the mass of the electron and v is its velocity, we can solve for the velocity of the electron:

KE = (1/2)mv^2

v^2 = (2KE)/m

v = √((2KE)/m)

Substituting the values we have calculated, we get:

√((2KE)/m) = √((2 × 4.45 × 10^-15 J)/(9.11 × 10^-28 kg)) ≈ 1.198 × 10^7 m/s

There are approximately 0.00493 moles of N in 0.217 g of N2O.

To determine the number of moles of N in 0.217 g of N2O, we need to convert the mass of N2O to moles using the molar mass of N2O, which is 44.0128 g/mol. We can use the formula:

moles = mass / molar mass

So, moles of N = 0.217 g / 44.0128 g/mol = 0.00493 mol. Therefore, there are approximately 0.00493 moles of N in 0.217 g of N2O.

https://brainly.com/question/4104576

#SPJ2

Answer:

It is commonly used as a fertilizer or feed supplement

Based on the given bright-line spectra and the observed wavelengths in the mixture's spectrum, the elements G and J are the ones present in the mixture.

From the given bright-line spectra and the spectrum of the mixture, we can determine the elements present in the mixture by comparing the specific wavelengths observed. Examining the bright-line spectra, we can identify that G has a distinct wavelength at 650 nm, J at 600 nm, L at 550 nm, and M at 500 nm.

Looking at the spectrum of the mixture, we can observe two prominent wavelengths, 650 nm and 600 nm. These correspond to the wavelengths of G and J, respectively. Since the spectrum of the mixture does not exhibit the wavelengths specific to L (550 nm) or M (500 nm), we can conclude that only G and J are present in the mixture.

Therefore, based on the given bright-line spectra and the observed wavelengths in the mixture's spectrum, the elements G and J are the ones present in the mixture.

This analysis relies on the principle that each element has characteristic wavelengths at which they emit light. By comparing the observed wavelengths in the mixture's spectrum with those of the individual elements, we can determine the elements present in the mixture.

Know more about wavelengths here:

https://brainly.com/question/10750459

#SPJ8

Answer:True

Explanation:

True. In a redox (reduction-oxidation) reaction, the reducing agent is the species that donates electrons, causing another species to be reduced. The reducing agent itself undergoes oxidation and loses electrons in the process.

Answer:

Tcs foods are foods that pose a greater risk of causing foodborne illness if not prepared.

Non Tcs foods on the other hand, are foods that are less likely to support the growth of bacteria and have a lower risk of causing foodborne illness.