Answer: Amplitude of the pressure variations is 1.26, frequency of the sound wave is 53.25 Hz, wavelength in air of the sound wave is 0.64 m, and the speed of the sound wave is 343 m/s.
(a) Amplitude of the pressure variation:We are given the equation for pressure variation AP as given below:AP = 1.26 sin(x - 335't)We know that the amplitude of a wave is the maximum displacement from the equilibrium value.So, amplitude of the pressure variation is 1.26. Therefore, the amplitude of the pressure variations is 1.26.(b) Frequency of the sound wave:The general equation for a wave is given below:
y(x, t) = A sin(kx - ωt)
where, k = 2π/λ,
ω = 2πf, and f is the frequency of the wave. Comparing the given equation with the general wave equation, we can see that k = 1 and
ω = 335.So,
frequency of the sound wave = f
= ω/2π
= 335/2π ≈ 53.25 Hz.
Therefore, the frequency of the sound wave is 53.25 Hz.
(c) Wavelength in air of the sound wave:We know that the velocity of sound in air is given by the relation:
v = f λwhere, v is the velocity of sound and λ is the wavelength of the sound wave.
Therefore, wavelength of the sound wave λ = v/f.
Substituting the values, we get:
λ = (1.26 × 2p) / [335 × (1.20 kg/m³) (1.013 × 10^5 Pa)]≈ 0.64 m
Therefore, the wavelength in air of the sound wave is 0.64 m.(d) Speed of the sound wave:As we know that the velocity of sound in air is given by:v = √(γp/ρ)
where, γ = 1.40 is the ratio of specific heats of air at constant pressure and constant volume,
p = 1.013 × 10^5
Pa is the atmospheric pressure, and ρ = 1.20 kg/m³ is the density of air at equilibrium.
Therefore, substituting the values we get:
v = √(1.40 × 1.013 × 10^5/1.20)≈ 343 m/s
Therefore, the speed of the sound wave is 343 m/s.
To know more about sound visit;
brainly.com/question/30045405
#SPJ11
Let d=11 meters. Find the point along the dashed line where the total electric field due to both charges is equal to zero. Express your answer as a distance in meters to the right of the −1C charge.
Simplifying the equation, we can solve for x, which will give us the distance in meters to the right of the -1 C charge where the total electric field is zero.
To find the point along the dashed line where the total electric field due to both charges is equal to zero, we need to consider the electric fields produced by the charges and their magnitudes. Given the distance d = 11 meters and charges of +1 C and -1 C, we can determine the position where the net electric field is zero.
The electric field due to a point charge can be calculated using the formula:
E = k * (q /[tex]r^2[/tex])
where E is the electric field, k is the electrostatic constant (9 x [tex]10^9 Nm^2/[/tex]/[tex]c^2[/tex]), q is the charge, and r is the distance from the charge.
In this case, we have two charges: +1 C and -1 C. Let's assume the +1 C charge is located to the right of the dashed line and the -1 C charge is located to the left. We want to find the position along the dashed line where the total electric field is zero.
At a point x meters to the right of the -1 C charge, the electric field due to the +1 C charge is E1 = k * (1 C /[tex]x + d)^2[/tex] , and the electric field due to the -1 C charge is E2 = k * (-1 C / [tex]x^2[/tex]).
To find the point where the total electric field is zero, we equate E1 and E2 and solve for x:
k * (1 C / [tex](x + d)^2[/tex]) = k * .[tex](-1 C/ x^2)[/tex]
Learn more about Electric field from the given link:
https://brainly.com/question/11482745
#SPJ11
Explain what is meant by the temporal coherence of a light source.
The temporal coherence of a light source refers to the degree of correlation or stability in the phase relationship between different waves or photons emitted by that source over time. In simpler terms, it describes how consistent the light waves are in their timing or oscillation.
Light waves consist of oscillating electric and magnetic fields, and their coherence determines the regularity or predictability of these oscillations. Temporal coherence specifically focuses on the behavior of light waves over time.
A perfectly coherent light source emits waves that maintain a constant phase relationship. This means that the peaks and troughs of the waves align precisely as they propagate. The result is a highly regular, stable, and predictable wave pattern.
On the other hand, an incoherent light source emits waves with random or unrelated phase relationships. The wave peaks and troughs are not consistently aligned, leading to a lack of order and predictability in the wave pattern.
Temporal coherence is an important property in various applications of light, such as interferometry, holography, and optical coherence tomography. In these fields, maintaining or manipulating the coherence of light is crucial for achieving accurate measurements, precise imaging, and high-resolution observations.
Learn more about coherence at
https://brainly.com/question/29886983
#SPJ11
(17%) Problem 3: A ball is kicked at ground level with an initial velocity of 16 m/s in the horizontal direction and 12 m/s in the vertical direction. 3.3% Part(a) At what speed does the ball hit the ground in m/s? A 33% Part (6) For how long does the ball remain in the air in seconds? 4 33% Part (e) What maximum height is attained by the ball in meters?
The ball's speed when it hits the ground is 24m/s, it remains in the air for 2.4 seconds, and it attains a maximum height of 7.2 meters.
Initial horizontal velocity = 16 m/s
Initial vertical velocity = 12 m/s
Acceleration due to gravity, g = 9.8 m/s²
(a) To find the speed with which the ball hits the ground:
The vertical motion of the ball is governed by the kinematic equation:
v = u + at
where,
v = final velocity = 0 (since the ball hits the ground)
u = initial velocity = 12 m/s
a = acceleration due to gravity = 9.8 m/s²
t = time of flight
Putting the given values in the above equation, we get:
0 = 12 + 9.8t
t = 1.22 s
The horizontal motion of the ball is uniform since there is no force acting in that direction. So, the distance covered in the horizontal direction can be calculated as:
Distance = speed × time
= 16 × 1.22
= 19.52 m
Now, the resultant speed of the ball can be calculated as:
Resultant speed = √(horizontal speed)² + (vertical speed)²
= √(16)² + (12)²
= √(256 + 144)
= √400
= 20 m/s
Therefore, the ball's speed when it hits the ground is 24 m/s.
(e) To find the maximum height attained by the ball:
The vertical distance covered by the ball during its ascent can be calculated using the formula:
S = ut + 1/2 at²
where,
u = initial vertical velocity = 12 m/s
t = time of ascent = 1.22/2 = 0.61 s (since time of ascent = time of descent)
a = acceleration due to gravity = 9.8 m/s²
Putting the given values in the above equation, we get:
S = 12 × 0.61 - 1/2 × 9.8 × (0.61)²
= 7.2 m
Therefore, the maximum height attained by the ball is 7.2 meters.
Learn more about acceleration here:
https://brainly.com/question/13860566
#SPJ11
13. A particle vibrates 5 times a second and each time it
vibrates, the energy advances by 50 cm. What is the wave speed? A.
5 m/s B. 2.5 m/s C. 1.25 m/s D. 0.5 m/s
14. Which of the following apply to
A particle that vibrates 5 times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm and the wave speed is 0.5 m/s
Therefore, the speed of the wave can be calculated using the following formula:
Wave speed = frequency x wavelength
Substituting in the values gives:
Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/s. Therefore, the answer is option D (0.5 m/s).
When a particle vibrates, it produces a wave, which is defined as a disturbance that travels through space and time. The wave has a certain speed, frequency, and wavelength. The wave speed refers to the distance covered by the wave per unit time. It is determined by multiplying the frequency by the wavelength.
In this problem, a particle vibrates five times a second, and each time it vibrates, the energy advances by 50 cm. The question is to determine the wave speed of the particle's vibration. To determine the wave speed, we need to use the following formula:
Wave speed = frequency x wavelengthThe frequency of the particle's vibration is 5 Hz, and the distance advanced by the energy per vibration is 50 cm. Therefore, the wavelength can be calculated as follows:
Wavelength = distance/number of vibrations = 50 cm/5 = 10 cm.
Substituting these values into the formula for wave speed, we get:
Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/sTherefore, the wave speed of the particle's vibration is 0.5 m/s.
A particle that vibrates five times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm. The wave speed can be calculated using the formula wave speed = frequency x wavelength, which gives a value of 0.5 m/s.
To know more about frequency visit
brainly.com/question/29739263
#SPJ11
Convert 75 in2 to SI units. The best method would be to work across the line and show all steps in the conversion. Use scientific notation and apply the proper use of significant figures. (1 in = 2.54 cm)
Round your answer to 2 significant figures.
The final answer is cm2 , 1930 , 2
Here are the steps in converting 75 in2 to SI units:
1. First, we need to know that 1 in = 2.54 cm.
2. We can then use the following equation to convert 75 in2 to cm2:
75 in2 * (2.54 cm / in)^2 = 1938.78 cm2
3. Notice that we have 2 significant figures in the original value of 75 in2. Therefore, the answer in cm2 should also have 2 significant figures.
4. Therefore, the converted value is 1939 cm2.
5. To round to 2 significant figures, we can simply drop the last digit, 8.
6. Therefore, the final answer is 1930 cm2.
Here is a table showing the steps in the conversion:
Original value | Unit | Conversion factor | New value | Unit | Significant figures
75 in2 | in2 | (2.54 cm / in)^2 | 1938.78 cm2 | cm2 | 2
Final answer | cm2 | 1930 | 2
Learn more about final with the given link,
https://brainly.com/question/30901533
#SPJ11
Assume the helium-neon lasers commonly used in student physics laboratories have power outputs
of 0.43 mW.
If such a laser beam is projected onto a circular spot 1.3 mm in diameter, what is its intensity?
The intensity of the laser beam is 1.024 W/m². This means that the laser beam delivers 1.024 watts of power over every square meter of the illuminated area of 1.3 mm in diameter.
The intensity of a laser beam is a measure of the amount of power it delivers over a specific area. The formula for finding the intensity of light is I=P/A, where I is the intensity of light, P is the power of light, and A is the area of light.
Assuming that the power output of a helium-neon laser used in a student physics laboratory is 0.43 mW and that it is projected onto a circular spot 1.3 mm in diameter, the laser's intensity can be calculated as follows:
I = P / A,
where P = 0.43 mW and A = πr² (since the spot is circular),
where r = 0.65 mm.
I = 0.43 × 10^-3 W / π (0.65 × 10^-3 m)²
I = 1.024 W/m²
Therefore, the intensity of the laser beam is 1.024 W/m². This means that the laser beam delivers 1.024 watts of power over every square meter of the illuminated area of 1.3 mm in diameter.
Learn more About intensity from the given link
https://brainly.com/question/25361971
#SPJ11
A circuit has three parallel resistors R1 = 20, R2 = 30, R3 = 40
connected to a 12 V battery. The potential (voltage) drop across
resistor three, R3, is 12 V.
Select one:
True
False
The statement "The potential (voltage) drop across resistor three, R3, is 12 V" is False.
In a parallel circuit, the voltage across each resistor is the same as the voltage across the battery. Therefore, the potential drop across all resistors in a parallel configuration is equal to the voltage of the battery.
In this given circuit, the resistors R1, R2, and R3 are connected in parallel to a 12 V battery. According to the properties of parallel circuits, the potential drop across each resistor should be equal to 12 V.
However, the statement indicates that the potential drop across resistor three, R3, is 12 V. This implies that the voltage across R3 is equal to the total voltage of the circuit, which is not possible in a parallel circuit.
Therefore, the statement is false. The potential drop across resistor three, R3, cannot be 12 V in a parallel circuit connected to a 12 V battery.
Learn more about Potential voltage from the given link:
https://brainly.com/question/25401344
#SPJ11
Q.2- Explain why H₂O is considered as polar molecule, while CO₂ is considered as nonpolar molecule. Q.3- What is the difference between the Born-Oppenheimer and adiabatic approximation
The Adiabatic approximation is used to consider the slow motion of atomic nuclei in an electronic potential energy field. The approximation assumes that the electron cloud adjusts slowly as the atomic nuclei move. The adiabatic approximation is mainly used in quantum chemistry and molecular physics to explain the electronic structure of molecules.
Explain why H₂O is considered as polar molecule, while CO₂ is considered as nonpolar molecule.Water (H₂O) and Carbon dioxide (CO₂) are two different molecules, where H₂O is polar and CO₂ is nonpolar. There are many factors for the polarity and non-polarity of molecules like electronegativity, dipole moment, molecular geometry, and bond type.H₂O molecule has a bent V-shaped geometry, with two hydrogen atoms attached to the oxygen atom. The electrons of the oxygen atom pull more towards it than the hydrogen atoms, causing a separation of charge called the dipole moment, which gives polarity to the molecule. The electronegativity difference between oxygen and hydrogen is high due to the greater electronegativity of the oxygen atom than the hydrogen atom. Thus, the H₂O molecule is polar.CO₂ molecule is linear, with two oxygen atoms attached to the carbon atom. The bond between the oxygen and carbon atom is double bonds. There is no separation of charge due to the symmetrical linear shape and the equal sharing of electrons between the carbon and oxygen atoms. Thus, there is no dipole moment, and CO₂ is nonpolar.Q.3- What is the difference between the Born-Oppenheimer and adiabatic approximation.The Born-Oppenheimer (BO) and adiabatic approximations are both concepts in quantum mechanics that are used to explain the behavior of molecules.The difference between the two approximations is given below:The Born-Oppenheimer (BO) approximation is used to consider the motion of atomic nuclei and electrons separately. It means that the movement of the nucleus and the electrons is independent of each other. This approximation is used to calculate the electronic energy and potential energy of a molecule.The Adiabatic approximation is used to consider the slow motion of atomic nuclei in an electronic potential energy field. The approximation assumes that the electron cloud adjusts slowly as the atomic nuclei move. The adiabatic approximation is mainly used in quantum chemistry and molecular physics to explain the electronic structure of molecules.
To know more about molecular visit:
https://brainly.com/question/156574
#SPJ11
A radioactive sample with a half-life of 2.9 s initially has 10,000,000 nuclei. What would be the activity, or decay rate, in Bg after 5.4 seconds?
The decay rate after 5.4 seconds is 0.07371 Bg, which is approximately equal to 0.074 Bg. Therefore, the correct answer is (A) 0.074 Bg.
The initial number of nuclei is given as 10,000,000 and the half-life as 2.9 s. We can use the following formula to determine the decay rate after 5.4 seconds:
A = A₀(1/2)^(t/t₁/₂)
Where A₀ is the initial activity, t is the elapsed time, t₁/₂ is the half-life, and A is the decay rate. The decay rate is given in Bq (becquerels) or Bg (picocuries). The activity or decay rate is directly proportional to the number of radioactive nuclei and therefore to the amount of radiation emitted by the sample.
The decay rate after 5.4 seconds is 3,637,395 Bq. So, the decay rate of the radioactive sample after 5.4 seconds is 3,637,395 Bq.
The half-life of the radioactive sample is 2.9 s, and after 5.4 seconds, the number of half-lives would be 5.4/2.9=1.8621 half-lives. Now, we can plug the values into the equation and calculate the activity or decay rate.
A = A₀(1/2)^(t/t₁/₂)
A = 10,000,000(1/2)^(1.8621)
A = 10,000,000(0.2729)
A = 2,729,186 Bq
However, we need to round off to three significant figures. So, the decay rate after 5.4 seconds is 2,730,000 Bq, which is not one of the answer choices. Hence, we need to calculate the decay rate in Bg, which is given as follows:
1 Bq = 27 pCi1 Bg = 1,000,000,000 pCi
The decay rate in Bg is:
A = 2,730,000(27/1,000,000,000)
A = 0.07371 Bg
Learn more about The decay rate: https://brainly.com/question/30068164
#SPJ11
In an RC series circuit, ε = 12.0 V, R = 1.49 MQ, and C= 1.64 F. (a) Calculate the time constant. (b) Find the maximum charge that will appear on the capacitor during charging. (c) How long does it take for the charge to build up to 11.5C? (a) Number i Units (b) Number i Units (c) Number i Units
Therefore, it takes approximately 1.218 × 10⁶ seconds for the charge to build up to 11.5 C.
To calculate the time constant in an RC series circuit, you can use the formula:
τ = R * C
ε = 12.0 V
R = 1.49 MQ (megaohm)
C = 1.64 F (farad)
(a) Calculate the time constant:
τ = R * C
= 1.49 MQ * 1.64 F
τ = (1.49 × 10⁶ Ω) * (1.64 C/V)
= 2.4436 × 10⁶ s (seconds)
Therefore, the time constant is approximately 2.4436 × 10⁶ seconds.
(b) To find the maximum charge that will appear on the capacitor during charging, you can use the formula:
Q = C * ε
= 1.64 F * 12.0 V
= 19.68 C (coulombs)
Therefore, the maximum charge that will appear on the capacitor during charging is approximately 19.68 coulombs.
(c) To calculate the time it takes for the charge to build up to 11.5 C, you can use the formula:
t = -τ * ln(1 - Q/Q_max)
t = - (2.4436 × 10⁶s) * ln(1 - 11.5 C / 19.68 C)
t ≈ - (2.4436 ×10⁶ s) * ln(0.4157)
t ≈ 1.218 × 10^6 s (seconds)
Learn more about series circuit here : brainly.com/question/14997346
#SPJ11
How much work, in milliJoules, would it take to move a positive charge, 16.6 microC, from the negative side of a parallel plate combination to the positive side when the voltage difference across the plates is 74.97 V?
The work required to move a positive charge, 16.6 microC, from the negative side of a parallel plate combination to the positive side, when the voltage difference across the plates is 74.97 V, is approximately 1.24502 millijoules.
The work (W) can be calculated using the equation W = Q * V, where Q is the charge and V is the voltage difference. In this case, the charge is 16.6 microC (16.6 × 10^(-6) C) and the voltage difference is 74.97 V. Plugging in these values, we have:
W = (16.6 × 10^(-6) C) * (74.97 V)
Calculating this, we find:
W ≈ 1.24502 × 10^(-3) J
To convert this to millijoules, we multiply by 1000:
W ≈ 1.24502 mJ
Therefore, it would take approximately 1.24502 millijoules of work to move the positive charge, 16.6 microC, from the negative side of the parallel plate combination to the positive side when the voltage difference across the plates is 74.97 V.
To learn more about work, click here: https://brainly.com/question/18094932
#SPJ11
Please name any and all variables or
formulas used, thank you in advance.
20. The total number of electron states with n=2 and 6-1 for an atom is: A) 2 B) 4 6 8 E) 10
The number of electron states in an atom can be calculated by using the formula `2n²`. Where `n` represents the energy level or principal quantum number of an electron state. To find the total number of electron states for an atom, we need to find the difference between the two electron states. In this case, we need to find the total number of electron states with
`n = 2` and `l = 6 - 1 = 5`.
The total number of electron states with n = 2 and 6-1 for an atom is given as follows:
- n = 2, l = 0: There is only one electron state with these values, which can hold up to 2 electrons. This state is also known as the `2s` state.
- n = 2, l = 1: There are three electron states with these values, which can hold up to 6 electrons. These states are also known as the `2p` states.
- n = 2, l = 2: There are five electron states with these values, which can hold up to 10 electrons. These states are also known as the `2d` states.
- n = 2, l = 3: There are seven electron states with these values, which can hold up to 14 electrons. These states are also known as the `2f` states.
The total number of electron states with `n = 2` and `l = 6 - 1 = 5` is equal to the sum of the number of electron states with `l = 0`, `l = 1`, `l = 2`, and `l = 3`. This is given as:
Total number of electron states = number of `2s` states + number of `2p` states + number of `2d` states + number of `2f` states
Total number of electron states = 1 + 3 + 5 + 7 = 16
The total number of electron states with n = 2 and 6-1 for an atom is E) 10.
To know more about electron states visit:
https://brainly.com/question/20110598
#SPJ11
cylinder shaped steel beam has a circumference of 3.5
inches. If the ultimate strength of steel is 5 x
10° Pa., what is the maximum load that can be supported by the
beam?"
The maximum load that can be supported by the cylinder-shaped steel beam can be calculated using the ultimate strength of steel and circumference of beam. The maximum load is 4.88 x 10^9 pounds.
The formula for stress is stress = force / area, where force is the load applied and area is the cross-sectional area of the beam. The cross-sectional area of a cylinder is given by the formula A = πr^2, where r is the radius of the cylinder.
To calculate the radius, we can use the circumference formula C = 2πr and solve for r: r = C / (2π).
Substituting the given circumference of 3.5 inches, we have r = 3.5 / (2π) ≈ 0.557 inches.
Next, we calculate the cross-sectional area: A = π(0.557)^2 ≈ 0.976 square inches.
Now, to find the maximum load, we can rearrange the stress formula as force = stress x area. Given the ultimate strength of steel as 5 x 10^9 Pa, we can substitute the values to find the maximum load:
force = (5 x 10^9 Pa) x (0.976 square inches) ≈ 4.88 x 10^9 pounds.
Therefore, the maximum load that can be supported by the beam is approximately 4.88 x 10^9 pounds.
Learn more about cross-sectional area here; brainly.com/question/31308409
#SPJ11
What's the wrong sentence about STDs? a) There can have severe consequences if not treated b) There is no need to treat partners also c) Risk groups are mostly adolescents and young adults d) Reporting is difficult e) Most are nonsymptomatic
The wrong sentence about STDs is option b.
Sexually transmitted diseases (STDs) refer to infectious diseases that spread from one person to another during intercourse contact. Some of the common examples include HIV/AIDS, syphilis, genital herpes, gonorrhea, and chlamydia. Sexually transmitted infections (STIs) are one of the most prevalent and preventable causes of infertility, chronic pain, ectopic pregnancy, and pelvic inflammatory disease (PID) among young people.
The sentence that states that the partner need not be treated, is the wrong sentence about STDs since it is essential to treat all sexual partners when one person tests positive for an STI or STD.
Most sexually transmitted infections are asymptomatic, which means they do not have any visible signs or symptoms. As a result, people are less likely to realize that they have an STI, and they end up spreading it unknowingly. Therefore, early detection and treatment are critical for the prevention of long-term health consequences.
Sexual activity in adolescence and young adulthood is associated with an increased risk of STIs and STDs. This is because the sexual organs are not yet fully developed and their immunity is not yet stable. Therefore, they should practice safe sex and use condoms correctly and consistently to reduce the risk of contracting STIs or STDs.
Reporting STIs is difficult because of the stigma attached to it, which can lead to fear, discrimination, and prejudice. Additionally, there are no legal requirements for mandatory reporting of STIs. However, it is crucial to report STIs to public health officials since it can help in identifying patterns and preventing outbreaks of STIs.
In conclusion, it is essential to treat partners also when one person tests positive for an STI or STD. Safe practices and early detection can help prevent the spread of STIs and STDs.
Learn more about STDs at: https://brainly.com/question/14439867
#SPJ11
Suppose you have two small pith balls that are 6.5 cm apart and have equal charges of −27nC ? What is the magnitude of the repulsive force, in newtons, between the two pith balls?
The given problem states that two small pith balls that are 6.5 cm apart and have equal charges of −27nC. We need to calculate the magnitude of the repulsive force, in newtons, between the two pith balls.
Therefore, by using Coulomb's law, we get the magnitude of the repulsive force between the two pith balls is
[tex]1.18 x 10^-6 N.[/tex]
The formula for Coulomb's law is
[tex]F = k x (q1 x q2) / r^2,[/tex]
where k is Coulomb's constant which is
[tex]9 x 10^9 N m^2 C^-2,[/tex]
R is the distance between two charged particles. For two particles with the same sign of the charge, the force is repulsive. :Coulomb's law provides a means of finding the magnitude of the electrical force between two charged objects. The law is founded on the principle that the electrical force between two objects is proportional to the magnitude of the charges and inversely proportional to the square of the distance between them. The electrical force is repulsive if the charges are of the same sign and attractive if the charges are of opposite sign. The law is stated mathematically as
[tex]F = k(q1q2/r^2),[/tex]
where F is the electrical force, q1 and q2 are the magnitudes of the two charges, r is the distance between them, and k is Coulomb's constant, which is approximately equal to
[tex]9.0 x 10^9 N*m^2/C^2.[/tex]
The unit of charge in this system is the Coulomb (C).
To know more about newton visit:
https://brainly.com/question/31920176
#SPJ11
On a hydrolic press a 430 kg car needs to be lifted. The area of the platform, where the car is, is 26 m². The area of the platform, where the technichian applies the pressure, is 4 m² What is the minimum force needs to be applied to lift the car? Consider g = 10 m/s2 Round up your answer to integer
1725 J of heat is added to a system, that increased the internal energy by 790 J. What is the work done by/on the system in process?
The minimum force needed to lift the car on the hydraulic press is approximately 662 N. We can use the principle of Pascal's law. The work done by/on the system in the process is 935 J.
To calculate the minimum force required to lift the car on a hydraulic press, we can use the principle of Pascal's law, which states that the pressure applied to an enclosed fluid is transmitted undiminished to all portions of the fluid and to the walls of its container.
Given:
Area of the platform where the car is (A1) = 26 m²
Area of the platform where the technician applies the pressure (A2) = 4 m²
Force applied on the smaller platform (F2) = ?
Force required to lift the car (F1) = ?
According to Pascal's law, the pressure exerted on the fluid is the same in all parts of the fluid:
Pressure exerted on the car platform (P1) = Pressure exerted on the technician platform (P2)
The pressure is defined as force divided by area:
P1 = F1 / A1
P2 = F2 / A2
Since P1 = P2, we can equate the two equations:
F1 / A1 = F2 / A2
Now we can solve for F1:
F1 = (F2 / A2) * A1
Substituting the given values:
F1 = (F2 / 4) * 26
To find the minimum force required, we assume that the force is just enough to lift the car, which means the weight of the car is balanced by the force:
F1 = Weight of the car
Weight of the car = mass of the car * acceleration due to gravity
Weight of the car = 430 kg * 10 m/s² = 4300 N
Substituting this value in the equation:
4300 = (F2 / 4) * 26
Simplifying the equation:
F2 = (4300 * 4) / 26 = 661.54 N
Rounding up to the nearest integer, the minimum force needed to lift the car on the hydraulic press is approximately 662 N.
To calculate the work done by/on the system, we can use the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:
ΔU = Q - W
Given:
Heat added to the system (Q) = 1725 J
Change in internal energy (ΔU) = 790 J
Work done by/on the system (W) = ?
Using the equation:
ΔU = Q - W
Rearranging the equation to solve for work:
W = Q - ΔU
Substituting the given values:
W = 1725 J - 790 J = 935 J
The work done by/on the system in the process is 935 J.
To learn more about Pascal's law click here
https://brainly.com/question/29875098
#SPJ11
What is the kinetic energy of a 108 cm long thin uniform rod with a mass of 431 g that is rotating about its center at 3.2 rad/s? Give your answer in Joules.
The kinetic energy of the rotating rod is 0.0143 J. Kinetic energy is calculated as half the product of an object's mass and the square of its velocity.
The kinetic energy of a rotating object can be calculated using the formula for rotational kinetic energy: KE = (1/2) * I * ω2, where KE is the kinetic energy, I is the moment of inertia, and ω is the angular velocity.
For a thin uniform rod rotating about its center, the moment of inertia can be expressed as I = (1/12) * m * [tex]L^{2}[/tex], where m is the mass of the rod and L is its length.
Plugging in the given values, we have:
m = 431 g = 0.431 kg (converting grams to kilograms)
L = 108 cm = 1.08 m (converting centimeters to meters)
ω = 3.2 rad/s
First, we calculate the moment of inertia:
I = (1/12) * (0.431 kg) * (1.08 m)2 = 0.0413 kg·[tex]m^{2}[/tex]
Next, we substitute the values into the formula for kinetic energy:
KE = (1/2) * (0.0413 kg·[tex]m^{2}[/tex]) * (3.2 rad/s)2 = 0.0143 J
Therefore, the kinetic energy of the rotating rod is 0.0143 J.
To learn more about kinetic energy click here:
brainly.com/question/30337295
#SPJ11
(d) How does the expression for the van der Waals gas compare Tc to the equivalent expression PV for an ideal gas? Explain the origin T of any difference, giving as much detail as possible. (e) Using the differential form of the Laws of Thermodynamics as a starting point, and carefully listing all your assumptions, show the sequence of steps that lead to the equation of the slope of the phase dP coexistence line, giving the slope (the Clausius-Clapeyron dT equation).
The van der Waals equation provides a more accurate description of real gases by incorporating the effects of intermolecular forces and molecular size, which are neglected in the ideal gas equation. In comparison, the expression for an ideal gas is given by: PV=nRT
(d) The expression for the van der Waals gas compares to the equivalent expression PV for an ideal gas by having an additional term that accounts for the attractive forces between the molecules. This additional term is a positive constant, and it causes the critical temperature of a van der Waals gas to be lower than the critical temperature of an ideal gas. The origin of this difference is the fact that the molecules of a real gas are not point masses, and they do have some attractive forces between them. These attractive forces cause the molecules to be closer together than they would be in an ideal gas, and this leads to a lower critical temperature.
(e) The differential form of the Laws of Thermodynamics can be used to derive the Clausius-Clapeyron equation. The starting point is the Clausius-Clapeyron relation, which states that the change in the pressure of a substance with respect to temperature is proportional to the change in the volume of the substance with respect to temperature. The proportionality constant is known as the Clausius-Clapeyron coefficient.
The next step is to use the differential form of the first law of thermodynamics to express the change in the internal energy of the substance as a function of the change in the pressure and the change in the volume. The first law of thermodynamics states that the change in the internal energy of a system is equal to the work done on the system plus the heat added to the system. The work done on the system is equal to the pressure times the change in the volume, and the heat added to the system is equal to the specific heat capacity times the change in the temperature.
The final step is to use the differential form of the second law of thermodynamics to express the change in the entropy of the substance as a function of the change in the pressure and the change in the volume. The second law of thermodynamics states that the change in the entropy of a system is equal to the heat added to the system divided by the temperature.
The Clausius-Clapeyron equation can then be derived by combining the Clausius-Clapeyron relation, the expression for the change in the internal energy of the substance, and the expression for the change in the entropy of the substance.
The Clausius-Clapeyron equation is a very important equation in thermodynamics. It can be used to calculate the boiling point of a substance, the melting point of a substance, and the vapor pressure of a substance.
To learn more about van der Waals equation click here
https://brainly.com/question/31585867
#SPJ11
A 9.7-V battery, a 5.03- resistor, and a 10:2-H inductor are connected in series. After the current in the circuit has reached its maximum value, calculate the following (a) the power being supplied by the battery w (b) the power being delivered to the resistor w (the power being delivered to the inductor w (d) the energy stored in the magnetic field of the inductor
(a) Power being supplied by the battery, P = VI = (9.7)I
(b) Power delivered to the resistor = (I² × 5.03)
(c) The power delivered to the inductor is zero.
(d) The energy stored in the magnetic field of the inductor is 1/2 × 10.2 × I² joules.
(a) Power is equal to voltage multiplied by current.
P = VI
Where V is the voltage and I is the current
Let I be the current in the circuit
The voltage across the circuit is 9.7 V.
The circuit has only one current.
Therefore the current through the battery, resistor, and inductor is equal to I.
I = V / R
Where R is the total resistance in the circuit.
The total resistance is equal to the sum of the resistances of the resistor and the inductor.
R = r + XL
Where r is the resistance of the resistor, XL is the inductive reactance.
Inductive reactance, XL = ωLWhere ω is the angular frequency.ω = 2πf
Where f is the frequency.
L is the inductance of the inductor. L = 10:2 H = 10.2 H.XL = 2πfLω = 2πf10.2I = V / R = 9.7 / (r + XL)
Substituting values
I = 9.7 / (5.03 + 2πf10.2)
Power, P = VI = (9.7)I
(b) Power is equal to voltage squared divided by resistance.
P = V² / R
Where V is the voltage across the resistor, and R is the resistance of the resistor.
Voltage across the resistor, V = IRV = I × 5.03P = (I × 5.03)² / 5.03P = (I² × 5.03)
(c) The power delivered to the inductor is zero. This is because the voltage and current are not in phase, and therefore the power factor is zero.
(d) The energy stored in the magnetic field of the inductor is given by the formula:
Energy, E = 1/2 LI²
Where L is the inductance of the inductor, and I is the current flowing through the inductor.
Energy, E = 1/2 × 10.2 × I²
Hence, the energy stored in the magnetic field of the inductor is 1/2 × 10.2 × I² joules.
To know more about inductor, refer to the link below:
https://brainly.com/question/31503384#
#SPJ11
Determine the average induced emf, in V, for a coil of seventeen
turns which is rotated so that the total combined magnetic flux
through all 17 coils changes from 0.125 Wb to 0.375 Wb in 0.0500
s.
The average induced electromotive force (emf) for a coil of seventeen turns, undergoing a change in total combined magnetic flux from 0.125 Wb to 0.375 Wb in 0.0500 s, can be calculated using Faraday's law of electromagnetic induction. The average induced emf is found to be 2.4 V.
Faraday's law states that the induced emf in a coil is proportional to the rate of change of magnetic flux through the coil. The formula for calculating the induced emf is given by:
emf = (Δφ) / Δt
emf is the induced electromotive force,
Δφ is the change in magnetic flux, and
Δt is the change in time.
In this case, the change in magnetic flux is given as Δφ = 0.375 Wb - 0.125 Wb = 0.250 Wb. The change in time is given as Δt = 0.0500 s.
Substituting these values into the formula, we have:
emf = (0.250 Wb) / (0.0500 s) = 5 V/s
Since the coil has seventeen turns, the average induced emf can be determined by dividing the total emf by the number of turns:
Average induced emf = (5 V/s) / 17 = 0.294 V/turn
Rounding off to the appropriate number of significant figures, the average induced emf for the given coil is approximately 0.29 V/turn or 2.4 V in total.
Learn more about magnetic flux click here: brainly.com/question/1596988
#SPJ11
Which of the following is true about the essential difference between microwaves and radio waves?
(A) The former has a longer wavelength, and the latter has a shorter wavelength.
(B) The former is a form of radiation, the latter is not,
(C) The former is a beam of photons, but the latter is not a photon
(D) None of the above.
The following is true about the essential difference between microwaves and radiowaves: (A) The former has a longer wavelength, and the latter has a shorter wavelength.
Microwaves are a type of electromagnetic radiation that is commonly used in microwave ovens, radar, and satellite communications, among other things. Microwaves have wavelengths that range from about one meter to one millimeter. Microwaves have frequencies that range from approximately 300 MHz to 300 GHz.
Radio waves are a type of electromagnetic radiation that is used in radio communication, as well as in radar and television broadcasting. Radio waves have wavelengths that range from approximately 1 millimeter to 100 kilometers. Radio waves have frequencies that range from approximately 3 kHz to 300 GHz.
The essential difference between microwaves and radio waves is that the former has a longer wavelength, and the latter has a shorter wavelength.
To know more about wavelength, visit:
https://brainly.com/question/31143857
#SPJ11
MOD4 P5: A wind turbine blade with radius of 39 m and a mass that is 1030 kg and rotating at 0.25 rev/s. Assuming all the mass is located at the end of the blade, what is the net force acting on the end of the turbine blade? Fc=
The net force acting on the end of the turbine blade is 98119.025 N.
Given data:The radius of the wind turbine blade, r = 39 m.The mass of the wind turbine blade, m = 1030 kg.The number of revolutions per second of the wind turbine blade, n = 0.25 rev/s.The formula to find the centrifugal force acting on the end of the turbine blade is given by
Fc = mrω²
Where,
Fc = Centrifugal force acting on the end of the turbine blade.
m = Mass of the turbine blade.
r = Radius of the turbine blade.
n = Number of revolutions per second of the turbine blade.
ω = Angular velocity of the turbine blade.
We are given the values of mass, radius, and number of revolutions per second. We need to find the net force acting on the end of the turbine blade.Net force = Centrifugal forceCentrifugal force = mrω²Putting the given values in the above formula, we get,Fc = 1030 × (39) × (0.25 x 2π)²Fc = 1030 × (39) × (0.25 x 2 x 3.14)²Fc = 1030 × 39 × 3.14² / 4Fc = 98119.025 N
To know more about net force:
https://brainly.com/question/29261584
#SPJ11
Driving on a hot day causes tire pressure to rise. What is the pressure inside an automobile tire at 45°C if the tire has a pressure of 28 psi at 15°C? Assume that the
volume and amount of air in the tire remain constant.
Driving on a hot day causes tire pressure to rise, the pressure inside the tire will increase to 30.1 psi.
The pressure of a gas is directly proportional to its temperature. This means that if the temperature of a gas increases, the pressure will also increase. The volume and amount of gas remain constant in this case.
The initial temperature is 15°C and the final temperature is 45°C. The pressure at 15°C is 28 psi. We can use the following equation to calculate the pressure at 45°C:
P2 = P1 * (T2 / T1)
Where:
P2 is the pressure at 45°C
P1 is the pressure at 15°C
T2 is the temperature at 45°C
T1 is the temperature at 15°C
Plugging in the values, we get:
P2 = 28 psi * (45°C / 15°C) = 30.1 psi
Therefore, the pressure inside the tire will increase to 30.1 psi.
To learn more about tire pressure click here; brainly.com/question/24179830
#SPJ11
Problem 2. Decibel scale in acoustic equipment. In ace of voltage in signal cable there is applicable reference level of UO = 0,775 V. So level of voltage in decibel scale is given as follow: U Ly[dB] = 20 * 1080,775V So one get following levels for 1 Volt and 500 mV accordingly: 1 V Liv[dB] = 20 * log; 0,775V 20* log 1,29 = 2,2 dBu = 0,5 V Lo,sv[dB] = 20 * log; 0,775V 20 * log 0,645 = -3,8 dBu a. Compute level value in dB for U=1 mV, U = 5 mv, U=20 UV. b. Compute the voltage, which level is equal 12 dB.
In ace of voltage in signal cable there is applicable reference level of UO = 0,775 V. The voltage corresponding to a level of 12 dB is approximately 1.947 V.
a. To compute the level value in decibels for different voltage values, we can use the formula: Level [dB] = 20 * log10(Vin / Vref)
Where: Vin is the input voltage.
Vref is the reference voltage (0.775 V in this case).
Let's calculate the level values for the given voltage values:
For U = 1 mV:
Level [dB] = 20 * log10(1 mV / 0.775 V)
Level [dB] = 20 * log10(0.00129)
Level [dB] ≈ -59.92 dBu
For U = 5 mV:
Level [dB] = 20 * log10(5 mV / 0.775 V)
Level [dB] = 20 * log10(0.00645)
Level [dB] ≈ -45.76 dBu
For U = 20 µV:
Level [dB] = 20 * log10(20 µV / 0.775 V)
Level [dB] = 20 * log10(0.0000258)
Level [dB] ≈ -95.44 dBu
b. To compute the voltage corresponding to a level of 12 dB, we rearrange the formula:
Level [dB] = 20 * log10(Vin / Vref)
Let's solve for Vin:
12 = 20 * log10(Vin / 0.775 V)
0.6 = log10(Vin / 0.775 V)
Now, we can convert it back to exponential form:
10^0.6 = Vin / 0.775 V
Vin = 0.775 V * 10^0.6
Vin ≈ 1.947 V
So, the voltage corresponding to a level of 12 dB is approximately 1.947 V.
learn more about voltage
https://brainly.com/question/32426120
#SPJ11
Need help with questions 1-5 please :)
1) An object is launched along the incline of angle 30 degrees with horizontal from its bottom level with initial velocity 6.4 m/s. It reaches height 2.3 m, comes to momentarily stop and slides back. When it comes back to initial point it has velocity 2.3 m/s. Find coefficient of friction between object and an incline.
2)A block of mass 2.2 kg sliding along horizontal rough surface is traveling at a speed 4.3 m/s when strikes a massless spring and compresses spring a distance 3.5 cm before coming to stop. If the spring has stiffness constant 750.0 N/m, find coefficient of friction between block and surface.
3) An object of mass m=2.0 kg is sliding down from incline creating angle 30 degrees with horizontal. Coefficient of kinetic friction between object and incline is 0.33. Find net work done on object over the distance d=3.0 m. Give answer in J.
4)A mass 4.6 kg is released from the uppermost point of the track (see. fig) and clears the look of radius R=1.50 m with speed 1.27 times greater than minimum speed required to maintain contact with the track. Find height H from which this object was released, give answer in meters.
5) Mass B of 7.5 kg connected to mass A of 2.0 kg through massless rope and massless and frictionless pulley is kept to height H=3.0 m from the ground and released at some moment. Find velocity of mass B just before it hits the ground. Give answer in m/s.
The evaluation of the motion of the objects using Newton's second law of motion and the principle of conservation of energy indicates that we get the following approximate values.
0.470.3112.6 J5.71 m4.69 m/sWhat is Newton's second law?Newton's second law of motion states that the acceleration of an object in motion is directly proportional to the net force acting on the object and inversely proportional to the mass of the object.
1) The acceleration due to gravity along the incline plane = g × sin(30°)
Therefore, the acceleration due to gravity along the incline ≈ 9.81 × 0.5 = 4.905
The acceleration due to gravity along the incline ≈ 4.9 m/s²
The initial speed of the object indicates;
0² = 6.4² - 2 × a × 2.3
6.4² = 2 × a × 2.3
a = 6.4²/(2 × a × 2.3) ≈ 8.9
Therefore, the acceleration due to the plane = Acceleration - Acceleration due to gravity
acceleration due to the plane, a = -8.9 - (-4.9) = 4.0
According to Newton's second law of motion, we get;
The friction force, F = m·a, therefore, F = 4·m
Normal force, FN = m·g·cos(30°)
Therefore, FN = m × 9.8 × √3/2 = (4.9·√3)·m
Coefficient of friction, μ = Ff/FN
Therefore, Ff = (4·m)/((4.9·√3)·m) = 4/((4.9·√3)) ≈ 0.472) The work done by the spring, W = 0.5 × k × x²
Therefore, W = 0.5 × 750 × 0.035² ≈ 0.46 J
The initial kinetic energy of the rock, KE = 0.5·m·v²
Therefore; K.E. = 0.5 × 2.2 × 4.3² = 20.339 J
Final kinetic energy = 0 J (The block comes to a stop)
Net work = KEf - KEi
Net work = 0 J - 20.339 J = -20.339 J
Work done by friction alone, Wf = 20.339 -0.46 = 19.879 J
Work = Force × Distance
Therefore; Work done by friction, Wf = Ff × d
Ff = 19.879/d
d = 3.0, therefore; F[tex]_f[/tex] = 19.879/3.0
The normal force, F[tex]_N[/tex] ≈ 2.2 × 9.8 = 21.56
FN = 21.56 N
Static friction, [tex]\mu_k[/tex] = F[tex]_f[/tex]/F[tex]_N[/tex] = (19.879/3.0)/21.56 ≈ 0.313) The force of gravity acting along the inclined plane is; Fg = m·g·sin(θ)
Therefore; Fg = 2.0 × 9.8 × sin(30°) = 9.8 N
Friction force, Ff = [tex]\mu_k[/tex] × [tex]F_N[/tex]
[tex]\mu_k[/tex] = The coefficient of kinetic friction = 0.33
[tex]F_N[/tex] = m·g·cos(30°)
Therefore; [tex]F_N[/tex] = 2.0 × 9.8 × cos(30°) = 9.8 × √3 ≈ 16.97 N
[tex]F_f[/tex] = [tex]\mu_k[/tex] × [tex]F_N[/tex]
Therefore; [tex]F_f[/tex] = 0.33 × 16.97 ≈ 5.6 N
The net force is therefore; [tex]F_{net}[/tex] ≈ 9.8 - 5.6 = 4.2 N
The net work over a distance of 4.2 is therefore;
[tex]W_{net}[/tex] = [tex]F_{net}[/tex] × d = 4.2 N × 3.0 m = 12.6 J
The net work done by the object over a distance of 3.0 meters is about 12.6 Joules4) Minimum speed v required for the object to maintain contact with the track at the top of the loop can be found using the formula;
v = √(g·R)
g = The acceleration due to gravity ≈ 9.8 m/s²
R = The radius of the loop = 1.50 m
Therefore; v = √(9.8 × 1.50) ≈ 3.83 m/s
The actual speed v' of the object at the top of the loop can be found from the relationship;
v' = 1.27 × 3.83 = 4.8641 m/s
The kinetic energy KE of the object at the top of the loop can be found from the equation;
KE = (1/2) × m × v'²
Therefore; KE = (1/2) × 4.6 × 4.8641² ≈ 54.42 J
The gravitational potential energy of the object at the top relative to the starting point H, can be found using the formula;
PE = m·g·h
Therefore; PE = 4.6 × 9.8 × 3 = 135.24 J
The total mechanical energy, E = KE + PE
Therefore; E = 54.42 + 135.24 = 189.66 J
The height H can therefore be found as follows;
The height from the point the object is released to the bottom of the loop, h = H - R
The conservation of energy indicates; E = m·g·h
h = E/(m·g)
Therefore; h = 189.66/(4.6 × 9.8) ≈ 4.21 m
h = H - R
Therefore; H = h + R = 4.21 + 1.5 = 5.71 m
The height H from which the object was released is about 5.71 meters above the height at the bottom of the loop5) The mass of the object B before it reaches the ground is required
Let T represent the tension in the rope. The net force on the mass A therefore is; m·a = T - m·g, where;
m = Mass of A = 2.0 kg
g = The acceleration due to gravity ≈ 9.8 m/s²
The force on the object B = m'·a = m·g - T
Where; m = The mass of B = 7.5 kg
The sum of the two forces indicates that we get; 2·m·a = (7.5 - 2.0) × 9.8
Therefore; a ≈ (7.5 - 2.0) × 9.8/(2 × 7.5) ≈ 3.59
The kinematic equation; v² = u² + 2·a·s indicates that we get;
The distance the object falls from from its start from rest, H = 3.0 m
The initial velocity, u = 0,
s = H ≈ 3.59 m
v² ≈ 0 + 2 × 3.67 × 3 ≈ 22.02
v = √(22.02) ≈ 4.69 m/s
The velocity of the mass just before it reaches the ground ≈ 4.69 m/s
Learn more Newton's second law of motion here: https://brainly.com/question/7578203
#SPJ1
A 45.0-kg child swings in a swing supported by two chains, each 2.92 m long. The tension in each chain at the lowest point is 344 N..
(a) Find the child's speed at the lowest point.
----------m/s
(b) Find the force exerted by the seat on the child at the lowest point. (Ignore the mass of the seat.)
______N (upward)
a)The child's speed at the lowest point is 4.42 m/s.b) the child's speed at the lowest point is 4.42 m/s. and force exerted by the seat on the child at the lowest point is 344 N (upward).
(a) Calculation of speed of child using the equation of conservation of energy. At the highest point, the energy of the child is totally potential energy. At the lowest point, all of the potential energy is converted to kinetic energy. Hence, we can equate these two as follows:
Potential energy at highest point = Kinetic energy at the lowest point
Mgh = (1/2)mv² Where, m = 45 kg, h = 2.92 m, g = 9.8 m/s².Substituting these values in the above equation, we get;
Mgh = (1/2)mv²45 × 9.8 × 2.92
= (1/2) × 45 × v²v
= 4.42 m/s. So, the child's speed at the lowest point is 4.42 m/s.
(b) Calculation of force exerted by the seat on the child at the lowest point. Since the child is in equilibrium at the lowest point, the force of tension in the chain is equal and opposite to the force exerted by the seat on the child. The free body diagram of the child is shown below. Therefore, the force exerted by the seat on the child is 344 N (upward). So, the child's speed at the lowest point is 4.42 m/s. and force exerted by the seat on the child at the lowest point is 344 N (upward).
To know more about Potential energy visit-
brainly.com/question/15764612
#SPJ11
If Joe Scientist has created his own temperature scale where water freezes at 57 and boils at 296, create a transformation equation that will allow you to convert celcius into his temperatures
The transformation equation to convert Celsius temperatures (C) to Joe Scientist's temperature scale (J) is:
J = 2.39C + 57
How do we calculate?In Joe Scientist's temperature scale,
water freezes = 57
water boils = 296.
In Celsius scale, water freezes at 0 and boils at 100.
To convert Celsius temperatures (C) to Joe Scientist's scale temperatures (J), we can use a linear transformation equation.
The general equation for linear transformation is:
J = aC + b
Celsius: 0 (water freezing point) -> Joe Scientist: 57
Celsius: 100 (water boiling point) -> Joe Scientist: 296
we can set up a system of linear equations to solve for 'a' and 'b' provided we have the data points
Equation 1: 0a + b = 57
Equation 2: 100a + b = 296
We solve this and find that
'a' =2.39
'b'= 57.
Learn more about linear equations at:
https://brainly.com/question/2030026
#SPJ4
A 1.4 kg mass mass is attached to a spring (k= 45 N/m) and allowed to oscillate horizontally, without friction. It's initial displacement of 19cm and an initial velocity of -, 92mls. What will be the mass's maximum speed?
Given,Mass of the system, m = 1.4 kgSpring constant, k = 45 N/mInitial displacement, x = 19 cm = 0.19 mInitial velocity, v = -92 m/sThe amplitude of the motion, A = x = 0.19 mUsing the law of conservation of energy,
we know that the total mechanical energy (TME) of a system remains constant. Hence, the sum of potential and kinetic energies of the system will always be constant.Initially, the mass is at point P with zero kinetic energy and maximum potential energy. At maximum displacement, the mass has maximum kinetic energy and zero potential energy. The motion is periodic and the total mechanical energy is constant, hence,E = 1/2 kA²where,E = TME = Kinetic Energy + Potential Energy = 1/2 mv² + 1/2 kx²v² = k/m x²v² = 45/1.4 (0.19)² ≈ 2.43 ml²/s² = 243 cm²/s² (to convert m/s to cm/s, multiply by 100)
Therefore, the maximum speed of the mass is √(v²) = √(243) = 15.6 cm/s.More than 100 is not relevant to this problem.
To know more about motion visit:
https://brainly.com/question/2748259
#SPJ11
The energy released by each fission within the core of a nuclear reactor is 2.00 × 102 MeV. The number of fissions occurring each second is 3.10 1018. Determine the power (in watts) that the reactor generates. Х Number i Units
The power generated by a nuclear reactor can be calculated by multiplying the energy released per fission by the number of fissions occurring per second.
In this case, the energy released per fission is given as 2.00 × 10^2 MeV and the number of fissions per second is 3.10 × 10^18. By converting the energy from MeV to joules and multiplying it by the number of fissions, we can determine the power generated by the reactor in watts.
To calculate the power generated by the reactor, we first need to convert the energy released per fission from MeV to joules. 1 MeV is equal to 1.6 × 10^-13 joules, so we can convert 2.00 × 10^2 MeV to joules by multiplying it by 1.6 × 10^-13. This gives us the energy released per fission in joules.
Next, we multiply the energy released per fission (in joules) by the number of fissions occurring per second. This gives us the total energy released per second by the reactor.
Finally, we express this energy in watts by dividing it by the unit of time (1 second). This calculation gives us the power generated by the reactor in watts.
Learn more about energy here: brainly.com/question/1932868
#SPJ11
No, Dir The speed of a cosmic ray muon is 29.8 cm/ns. using a constant velocity model, how many kilometers Will a cosmic ray travel if it's lifetime is 3.228 ms ²
Cosmic rays are very high-energy particles that originate from outside the solar system and hit the Earth's atmosphere. They include cosmic ray muons, which are extremely energetic and able to penetrate deeply into materials.
They decay rapidly, with a half-life of just a few microseconds, but this is still long enough for them to travel significant distances at close to the speed of light. If the speed of a cosmic ray muon is 29.8 cm/ns, we can convert this to kilometers per second by dividing by 100,000 (since there are 100,000 cm in a kilometer) as follows:
Speed = 29.8 cm/ns = 0.298 km/s
Using this velocity and the lifetime of the cosmic ray muon, we can calculate the distance it will travel using the formula distance = velocity x time:
Distance = 0.298 km/s x 3.228 ms = 0.000964 km = 0.964 m
t will travel a distance of approximately 0.964 meters or 96.4 centimeters if its lifetime is 3.228 ms.
Therefore, we can use a constant velocity model to estimate how far a cosmic ray muon will travel if its lifetime is known.
To know more about energetic visit:
https://brainly.com/question/31965710
#SPJ11