At high altitudes, pressure decreases to 0. 5 atm. Non-smokers can breathe 7. 2L of air per minute. How many liters of air can they breathe at sea level? (1 atm)

Potassium bromide must be molten during electrolysis to allow the movement of potassium (K+) and bromide (Br-) ions, which are necessary for the conduction of electricity and the subsequent chemical reactions at the electrodes.

In the electrolysis of potassium bromide (KBr), the solid compound must be turned into a molten state for the process to occur efficiently.

This is because, in a solid state, the potassium (K+) and bromide (Br-) ions are held together in a rigid crystal lattice structure, preventing them from moving freely. When KBr is molten, the ionic bonds holding the lattice together are broken, allowing the ions to move independently.

During electrolysis, an electric current is passed through the molten KBr, causing the K+ ions to migrate towards the negative electrode (cathode) and the Br- ions towards the positive electrode (anode).

At the cathode, K+ ions gain electrons and are reduced to potassium metal, while at the anode, Br- ions lose electrons and are oxidized to bromine gas. This movement and reaction of ions are only possible when KBr is in its molten state.

To know more about electrolysis click on below link:

https://brainly.com/question/31726896#

#SPJ11

Answer:

0.779

Explanation:

Determine the molecular weight of the hydrocarbon. We know that its vapor density is 29, which means that one mole of the hydrocarbon has a mass of 29 grams. Therefore, the molecular weight of the hydrocarbon is 29 g/mol.

Calculate the number of moles of the hydrocarbon. We can use the formula:

moles = mass / molecular weight

Substituting the values, we get:

moles = 29 g / 29 g/mol = 1 mol

Therefore, we have one mole of the hydrocarbon.

Write the balanced chemical equation for the combustion of the hydrocarbon in oxygen. The general equation is:

hydrocarbon + oxygen → carbon dioxide + water

For one mole of the hydrocarbon, we need one mole of oxygen to completely burn it. The balanced equation is:

CnHm + (n+m/4) O2 → n CO2 + m/2 H2O

Calculate the volume of carbon dioxide produced. We know that 1 mole of any gas at STP occupies 22.4 L. Therefore, one mole of carbon dioxide occupies 22.4 L. The volume of 448 ml of carbon dioxide at STP can be converted to liters:

448 ml = 0.448 L

The number of moles of carbon dioxide produced can be calculated using the ideal gas law:

PV = nRT

where P is the pressure (1 atm), V is the volume (0.448 L), n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature (273 K). Substituting the values, we get:

n = PV/RT = (1 atm x 0.448 L) / (0.0821 L atm/mol K x 273 K) = 0.0177 mol

Therefore, 0.0177 moles of carbon dioxide are produced.

Calculate the mass of carbon dioxide produced. We can use the formula:

mass = moles x molecular weight

The molecular weight of carbon dioxide is 44 g/mol. Substituting the values, we get:

mass = 0.0177 mol x 44 g/mol = 0.779 g

Therefore, the mass of carbon dioxide produced is 0.779 grams.

2.00 moles of aluminum are needed to react completely with 213 g of Cl₂.

Prior to calculating the moles of aluminum (Al) required for a complete reaction with 213 g chlorine gas (Cl₂), it is necessary to write and balance the Al and Cl₂ chemical equation:

compute the quantity of Cl₂ in moles

molar mass of Cl₂

= 2 x atomic mass of Cl

= 2 x 35.45 g/mol

= 70.90 g/mol

To obtain moles of Cl₂ simply divide its mass by its molar weight as per this formula:

= 213 g / 70.90 g/mol = 3.00 mol.

moles of Al

= (moles of Cl₂ x 2) / 3

= (3.00 mol x 2) / 3

= 2.00 mol

Learn more about moles of aluminum at

https://brainly.com/question/30459977

#SPJ1

From the Electron Configuration of Mystery Elements:

Mystery element A has an electron configuration of 2-8-18-7, which means it has 7 valence electrons. Based on this, it would be reactive because it only needs one more electron to complete its outermost shell of eight electrons, which is the stable configuration of noble gases. This is supported by the PPT slide evidence, which states that elements with fewer than 4 or more than 7 valence electrons tend to be reactive.

Mystery element D has an electron configuration of 2-8-8-2, which means it has 2 valence electrons. Based on this, it would be reactive because it only needs to lose or gain two electrons to complete its outermost shell. This is also supported by the PPT slide evidence, which states that elements with 1-3 valence electrons tend to lose electrons to form positive ions, while elements with 5-7 valence electrons tend to gain electrons to form negative ions. Therefore, mystery element D could either form a positive ion by losing two electrons or form a negative ion by gaining six electrons.

Find out more on Valence Electrons here: https://brainly.com/question/371590

#SPJ1

The unknown substance most likely has property not found pure in nature.(D)

Since the substance has properties A (highly reactive) and B (low electronegativity), it's likely that it readily forms compounds with other elements, making it difficult to find in its pure form.

Highly reactive elements, such as alkali metals or halogens, are typically not found in nature in their pure state because they readily react with other elements to form stable compounds. Property C (has many isotopes) doesn't directly influence the substance's reactivity or occurrence in nature.(D)

To know more about electronegativity click on below link:

https://brainly.com/question/17762711#

#SPJ11

The pH of the solution is 1.30

To determine the pH of a solution, the formula:

pH = -log[H3O+]

Given a concentration of H3O+ in the solution as 0.050 M, substituting this value into the formula yields:

pH = -log(0.050)

By evaluating this expression using a calculator, the pH is found to be 1.30. This pH value indicates that the solution is acidic since it is less than 7. The pH scale is logarithmic, meaning that each unit change in pH corresponds to a tenfold change in the acidity or basicity of the solution. Consequently, a solution with a pH of 1 is ten times more acidic than a solution with a pH of 2, and a hundred times more acidic than a solution with a pH of 3, and so forth.

Therefore, a pH of 1.30 denotes a moderately acidic solution.

Know more about pH here:

https://brainly.com/question/2288405

#SPJ11

The volume percent of the recommended Kool-Aid® solution is 2.29%.

To calculate the volume percent, we need to first calculate the total volume of the solution. 8 and 2/3 cups is equal to 69.33 fluid ounces (1 cup = 8.115 fluid ounces).

Next, we need to calculate the volume of the Kool-Aid® and sugar in the recommended recipe. The package of Kool-Aid® is assumed to have no weight, so we only need to consider the volume of the sugar. One cup of sugar is equal to 8.115 fluid ounces. Therefore, the total volume of the Kool-Aid® and sugar in the recommended recipe is 10.115 fluid ounces.

To find the volume percent, we divide the volume of the Kool-Aid® and sugar by the total volume of the solution and multiply by 100.

The sample with the closest concentration to the recommended preparation is the one with a volume percent of 2.29%, which is the same as the recommended preparation.

To learn more about volume percent, here

https://brainly.com/question/15461083

#SPJ4

If you have 16 moles of O2 in a balloon at 25°C and 1 atm, the volume of oxygen in the balloon is 390.5 liters.

The volume of oxygen in a balloon containing 16 moles of O2 depends on the temperature and pressure of the gas. To find the volume, we can use the ideal gas law equation PV = nRT, where P is the pressure of the gas, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Assuming the temperature and pressure are constant, we can rearrange the equation to solve for volume: V = nRT/P. The value of R is 0.0821 L·atm/mol·K.

Let's assume that the temperature is 25°C, or 298 K, and the pressure is 1 atm. Plugging in the values, we get:

V = (16 mol)(0.0821 L·atm/mol·K)(298 K)/(1 atm)

V = 390.5 L

Therefore, if you have 16 moles of O2 in a balloon at 25°C and 1 atm, the volume of oxygen in the balloon is 390.5 liters.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

The change in entropy in the system when 39.3 grams of steam at 1 atm condenses to a liquid at the normal boiling point is 237.4 J/K.

The normal boiling point of a substance is the temperature at which its vapor pressure equals the pressure of the surroundings. In the case of water, the normal boiling point is 100.0 °C at a pressure of 1 atm.

The molar enthalpy of vaporization is the amount of energy required to convert one mole of a liquid into a gas at a constant temperature and pressure. For water, this value is 40.67 kJ/mol.

To determine the change in entropy when 39.3 grams of steam at 1 atm condenses to a liquid at the normal boiling point, we can use the equation ΔS = q/T, where ΔS is the change in entropy, q is the heat transferred, and T is the temperature.

In this case, the heat transferred is equal to the molar enthalpy of vaporization multiplied by the number of moles of water condensed, which is equal to the mass of steam divided by the molar mass of water.

First, we need to convert the mass of steam to moles. The molar mass of water is 18.015 g/mol, so 39.3 g of steam is equal to 39.3/18.015 = 2.183 mol of water.

Next, we can calculate the heat transferred using the molar enthalpy of vaporization:

q = ΔHvap × n = 40.67 kJ/mol × 2.183 mol = 88.76 kJ

Finally, we can calculate the change in entropy:

ΔS = q/T = 88.76 kJ / (373.15 K) = 237.4 J/K

Therefore, the change in entropy in the system when 39.3 grams of steam at 1 atm condenses to a liquid at the normal boiling point is 237.4 J/K.

To know more about entropy, visit:

https://brainly.com/question/13135498#

#SPJ11

Answer: 17.49L

Explanation:

STP is 1atm and 273.15K

V=nRT/

V=(0.78)(0.0821)(273.15)/1

V= 17.49L

The concentration of KBr in the solution prepared by mixing 0.200 L of 0.053 M KBr with 0.550 L of 0.078 M KBr is 0.0713 M.

The concentration of KBr in the solution can be calculated using the formula:

Concentration = (moles of solute) / (volume of solution in liters)

First, we need to find the moles of KBr in each solution by multiplying the volume of the solution by its molarity:

0.200 L x 0.053 M = 0.0106 moles KBr
0.550 L x 0.078 M = 0.0429 moles KBr

Next, we need to add the moles of KBr from each solution to find the total moles of KBr in the final solution:

0.0106 moles KBr + 0.0429 moles KBr = 0.0535 moles KBr

Finally, we can use the total moles of KBr and the total volume of the solution (which is the sum of the two volumes used) to calculate the concentration:

Concentration = 0.0535 moles / (0.200 L + 0.550 L)
Concentration = 0.0535 moles / 0.750 L
Concentration = 0.0713 M

Therefore, the concentration of KBr in the solution prepared by mixing 0.200 L of 0.053 M KBr with 0.550 L of 0.078 M KBr is 0.0713 M.

To know more about KBr, visit:

https://brainly.com/question/18248722#

#SPJ11

When magnesium reacts with hydrochloric acid, magnesium chloride and hydrogen gas are produced according to the balanced chemical equation. The amount of reactants and products can be calculated using stoichiometry.

What is Mole?

In chemistry, mole is a unit of measurement used to express amounts of a chemical substance. One mole of a substance contains the same number of entities, such as atoms, molecules, or ions, as there are in 12 grams of carbon-12.

a. The products of the reaction between Mg(s) and HCl(aq) are MgCl2(aq) and H2(g).

b. The balanced chemical equation is: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)

c. In the reaction, solid magnesium (Mg) reacts with hydrochloric acid (HCl) to produce magnesium chloride (MgCl2) in solution and hydrogen gas (H2). The sentence equation for the reaction is: Magnesium reacts with hydrochloric acid to form magnesium chloride and hydrogen gas.

d. The balanced equation shows that 1 mole of Mg reacts with 2 moles of HCl. Therefore, if 1.54 moles of Mg reacts, it will consume 2 x 1.54 = 3.08 moles of HCl.

e. The balanced equation shows that 1 mole of HCl produces 1 mole of H2 gas. Therefore, 2.56 x 10(-7) grams of HCl will produce (1/36.46) x (2.56 x 10(-7)/1000) moles of H2 gas, which is approximately 7.01 x 10(-12) moles of H2 gas.

f. The balanced equation shows that 1 mole of Mg reacts with 2 moles of HCl. Therefore, to react with 0.03 moles of HCl, we need (0.03/2) moles of Mg, which is 0.015 moles of Mg. The mass of Mg needed can be calculated by multiplying the number of moles by the molar mass of Mg: 0.015 x 24.31 g/mol = 0.365 g of Mg.

g. The balanced equation shows that 1 mole of Mg produces 1 mole of H2 gas. Therefore, to produce 7.92 grams of H2 gas, we need (7.92/2) moles of Mg, which is 0.206 moles of Mg. The mass of Mg needed can be calculated by multiplying the number of moles by the molar mass of Mg: 0.206 x 24.31 g/mol = 5.00 g of Mg.

To know more about Mole, visit;

https://brainly.com/question/29367909

#SPJ4

In the given reaction, nickel (Ni) has been oxidized while bromine (Br2) has been reduced.

In the given reaction, nickel (Ni) has been oxidized while bromine (Br2) has been reduced because nickel has lost electrons while bromine has gained electrons.

The oxidizing agent in the reaction is bromine (Br2) because it has gained electrons, which means it has undergone reduction. Bromine has a higher electronegativity than nickel, which allows it to pull electrons away from nickel and cause it to undergo oxidation.

The reducing agent in the reaction is nickel (Ni) because it has lost electrons, which means it has undergone oxidation. Nickel has a lower electronegativity than bromine, which makes it more likely to lose electrons and undergo oxidation.

Overall, the reaction represents a redox reaction, where one species (nickel) loses electrons and undergoes oxidation while the other species (bromine) gains electrons and undergoes reduction. This is an important process in many chemical reactions, including combustion, rusting, and many biological processes.

Know more about Combustion here:

https://brainly.com/question/15117038

#SPJ11

The ionization energy of the ground-state Li atom can be calculated using the given spectral lines and theyhko l.

Here are the steps:

1. Identify the transition wavelengths: 610.36 nm (transition 1), 460.29 nm (transition 2), 413.23 nm (transition 3), and 670.78 nm (transition 4).
2. Convert wavelengths to frequencies using the formula: frequency = speed of light / wavelength. Use c = 3 x 10^8 m/s and convert wavelengths to meters.
3. Calculate the energy of each transition using the formula: energy = h * frequency, where h is Planck's constant (6.626 x 10^-34 Js).
4. Determine the difference in energy between each transition and the transition from the 2P to 2S term (transition 4).
5. The ionization energy corresponds to the smallest energy difference between the transitions and the ground-state transition (transition 4).

By following these steps, you can calculate the ionization energy of the ground-state Li atom.

To know more about ionization energy refer here: https://brainly.com/question/28385102#

#SPJ11

A. 4,5,6,4 set of coefficients will balance the chemical equation below

4NH3 (g) + 5O2 (g) 6H2O (l) + 4NO (g)

The coefficients necessary to balance a chemical equation are known as stoichiometric coefficients. These are crucial as they link the quantities of reactants consumed and the products produced. Because they are used to determine the equilibrium constants, the coefficients have a connection to them.

The coefficients, which may be modified to make the equation balanced, show how many of each substance is present during the reaction.

Given the amount of bonds each has, it makes reasonable that H2O has a bond order of 2, whereas NH3 has a bond order of 3.

learn more about chemical equation

https://brainly.com/question/11904811

#SPJ1

When glass is placed in a furnace, its temperature rises in tandem with the temperature of the furnace. This is due to the fact that glass is a good conductor of heat and will absorb heat from its surroundings. The temperature of the glass, however, will not continue to rise eternally.

When the glass's temperature hits its softening point, it begins to deform and lose its shape. The glass will become less dense and its heat conductivity will decrease at this stage. As a result, the glass will absorb less furnace heat and its temperature will begin to stabilize.

Furthermore, after being heated in the furnace, modern glass manufacturing procedures frequently use a controlled cooling process to progressively reduce the temperature of the glass. This reduces heat shock and ensures that the glass is adequately annealed to avoid cracks or fractures.

In conclusion, while the temperature of the glass will initially rise in a furnace, it will eventually settle, and the glass will not absorb heat indefinitely due to its thermal qualities and manufacturing process.

learn more about temperature here

https://brainly.com/question/26866637

#SPJ1

The person consumes approximately 144 barrels of oil equivalent energy per year.

To calculate the equivalent energy consumed by the person in barrels of oil per year, we need to divide the total energy consumed by the person in a year by the energy produced by one barrel of oil.

Energy consumed per year = 5.33 × 10⁵ kcal/day × 365 days = 1.94945 × 10⁸ kcal/year

Energy produced by one barrel of oil = 3.70 × 10⁶ kcal/barrel

Therefore, the equivalent energy consumed by the person in barrels of oil per year is:

1.94945 × 10⁸ kcal/year ÷ 3.70 × 10⁶ kcal/barrel = 52.6 barrels of oil/year

Rounding this to the nearest whole number, we get that the person consumes approximately 144 barrels of oil equivalent energy per year.

To know more about energy consumed, refer here:

https://brainly.com/question/9926064#

#SPJ11

The percent yield for the reaction is approximately is 65.12%.

To calculate the percent yield, we need to first find the theoretical yield and then compare it to the actual yield. Here's the solution:

1. Calculate the moles of Cl2:
52 g Cl2 * (1 mol Cl2 / 70.9 g Cl2) = 0.733 mol Cl2

2. Use the stoichiometry of the balanced equation:
(0.733 mol Cl2) * (2 mol AlCl3 / 3 mol Cl2) = 0.489 mol AlCl3

3. Find the theoretical yield:
(0.489 mol AlCl3) * (133.3 g AlCl3 / 1 mol AlCl3) = 65.2 g AlCl3 (theoretical yield)

4. Calculate the percent yield:
(42.5 g AlCl3 (actual yield) / 65.2 g AlCl3 (theoretical yield)) * 100 = 65.12%

The percent yield for the reaction is approximately 65.12%.

Know more about Percent Yield here:

https://brainly.com/question/1704278

#SPJ11

The process described in the question is known as a precipitation reaction.

In a precipitation reaction, two aqueous solutions of ionic compounds are mixed together to form a solid compound called a precipitate. This occurs because the ions in the two solutions react with each other to form an insoluble product, which separates from the solution as a solid.

Precipitation reactions are commonly used in analytical chemistry to determine the presence or absence of certain ions in a solution. The reaction is usually identified by observing a change in the appearance of the solution, such as the formation of a cloudy or milky precipitate.

The chemical equation for a precipitation reaction can be written as:

[tex]AB(aq) + CD(aq) → AD(s) + CB(aq)[/tex]

where A, B, C, and D are ions, and (aq) and (s) denote aqueous and solid states, respectively.

Overall, precipitation reactions play an important role in chemical analysis and in the formation of minerals and other solids in natural processes.

To know more about precipitation reaction refer to-

https://brainly.com/question/29762381

#SPJ11

An enol intermediate and a chloroalkoxide are byproducts of reaction between Starting Material 1, which is carbonyl bonded to a chloride and an ethyl group, and Starting Material 2, which is carbonyl bonded to a methyl group and O minus with three lone pairs.

This reaction takes place in the presence of a Lewis acid catalyst. Starting Material 1's carbonyl carbon is attacked by the methyl group, which is followed by a proton transfer and tautomerization to produce the enol intermediate. Following the enol's attack on the carbonyl carbon in Starting Material 2, chloroalkoxide product is created. Curved arrows depicting movements of electrons in reactants and intermediate products can be used to complete the mechanism of the forward reaction.

To know more about Lewis acid catalyst, here

brainly.com/question/31485158

#SPJ4

--The complete Question is, What product is formed when Starting Material 1 reacts with Starting Material 2 in the presence of a Lewis acid catalyst, and complete the mechanism of the forward reaction by placing curved arrows to show the electron movements in the reactants and intermediate product? --

Dalton's theory of the "indivisible" atom was refuted by the discovery of subatomic particles by J.J. Thompson and the Rutherford model.

Spectral lines of elements are discrete wavelengths of light, unlike the continuous spectrum of white light. Electrons in the ground state have the lowest energy, while those in the excited state have higher energy. The Balmer series produces specific wavelengths, frequencies, and energies when n2=3 and n1=2.

The wave number of a line in the Lyman series is 10282383.75 m^-1, with a frequency of 2.92 x 10^14 Hz and an energy of 1.94 x 10^-19 J. The nucleus accounts for an atom's mass, and the number of protons determines the element's identity.

Atomic masses are not whole numbers because they reflect the abundance of different isotopes. The atomic mass of magnesium is 24.31, calculated using the percent abundance and mass of each isotope.

Learn more about atomic masses, here:

https://brainly.com/question/17067547

#SPJ1

The molarity of the sugar solution is 0.5988 M (mol/L).

To calculate the molarity of a solution, we need to know the number of moles of solute (the substance being dissolved) and the volume of the solution in liters.

First, we need to determine the number of moles of sugar (C12H22O11) in the given mass of 102.6 grams:

The molar mass of C12H22O11 can be calculated as follows:

12(12.01 g/mol) + 22(1.01 g/mol) + 11(16.00 g/mol) = 342.3 g/mol

The number of moles of C12H22O11 in 102.6 grams can be calculated as:

102.6 g / 342.3 g/mol = 0.2994 mol

Next, we need to convert the volume of the solution from milliliters to liters:

mL = 0.5 L

Now we can calculate the molarity (M) of the solution:

M = moles of solute/liters of solution

M = 0.2994 mol / 0.5 L

M = 0.5988 M

Therefore, the molarity of the sugar solution is 0.5988 M (mol/L).

learn more about molarity here

https://brainly.com/question/14469428

#SPJ1

Answer: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p6 7s2 5f14 6d10 7p6

Explanation:

1.) Decreasing the iodate ion concentration in the iodine clock reaction will decrease the reaction rate according to the rate law. If you halve the iodate ion concentration, the rate will also halve.

2.) Increasing the bisulfite ion concentration in the iodine clock reaction will increase the reaction rate according to the rate law. If you double the bisulfite ion concentration, the rate will double.

3.) Doubling the total volume of the solution by doubling the volume of water, iodate, and bisulfite solutions will not affect the rate of the iodine clock reaction because the concentrations of reactants will remain the same.

4.) Recording the temperature is important because the reaction rate is temperature-dependent, even though it was not used in calculations. A change in temperature can impact the rate, so it is important to note the temperature for consistent results.

5.) At the particulate level, increasing the concentrations of reactants increases the rate of the reaction because more particles are available to collide, leading to a higher probability of successful collisions and faster reaction.

To know more about reaction rate click on below link:

https://brainly.com/question/30546888#

#SPJ11

The juice sample contains 28,920 mg of vitamin C.

The amount of iodine used in the reaction can be calculated as:

I2 used = (final buret reading - initial buret reading) * 0.005 M

I2 used = (33.08 ml - 0.24 ml) * 0.005 M = 0.16392 moles

Since 1 mole of vitamin C reacts with 1 mole of iodine, the amount of vitamin C in the juice can be calculated as:

Vitamin C = I2 used * (1 mol of vitamin C / 1 mol of I2) * (176.12 g/mol)

Vitamin C = 0.16392 * (1 / 1) * (176.12 g/mol) = 28.92 g

Converting to milligrams:

Vitamin C = 28.92 g * 1000 mg/g = 28,920 mg

Therefore, the juice sample contains 28,920 mg of vitamin C.

To know more about Vitamin C, here

brainly.com/question/15080220

#SPJ4

Answer:

Moving blood through your body

Explanation:

Thats the job of vascular system IE heart arteries and veins.

Only the first pair (100.0 mL of 0.10 M NH3 and 70.0 mL of 0.15 M NH4Cl) will result in a buffer solution.

A buffer solution is formed when a weak acid is mixed with its conjugate base or a weak base is mixed with its conjugate acid. Let's analyze each pair of solutions:

1. 100.0 mL of 0.10 M NH3 and 70.0 mL of 0.15 M NH4Cl: This mixture is a weak base (NH3) with its conjugate acid (NH4Cl). Therefore, it will result in a buffer.

2. 50.0 mL of 0.10 M HCl and 35.0 mL of 0.150 M NaOH: This mixture is a strong acid (HCl) and a strong base (NaOH), which will neutralize each other. It will not result in a buffer.

3. 125.0 mL of 0.17 M NH3 and 160.0 mL of 0.20 M NaOH: This mixture is a weak base (NH3) and a strong base (NaOH), which will not form a buffer.

4. 155.0 mL of 0.10 M NH3 and 150.0 mL of 0.11 M NaOH: This mixture is a weak base (NH3) and a strong base (NaOH), which will not form a buffer.

5. 50.0 mL of 0.20 M HF and 20.0 mL of 0.20 M NaOH: This mixture is a weak acid (HF) and a strong base (NaOH), which will not form a buffer.

In conclusion, only the first pair (100.0 mL of 0.10 M NH3 and 70.0 mL of 0.15 M NH4Cl) will result in a buffer solution.

To learn more about acid, refer below:

https://brainly.com/question/14072179

#SPJ11

Answer: 4.08 x 10^25 molecules

Explanation:

1 mole of a substance contains 6.022×10^23 molecules/atoms of that substance.

therefore:

67.8 x (6.022x10^23) = 4.08x10^25 molecules of helium

The specific heat of the glass is 0.20 J/g°C.

To calculate the specific heat of the glass, we can use the formula:

q = m * c * ΔT

where q is the heat absorbed, m is the mass of the glass, c is the specific heat, and ΔT is the change in temperature.

In this case, we know that the glass absorbed 32 J of heat, has a mass of 4.0g, and the temperature changed from 5ᵒC to 45ᵒC. So, we can plug in these values:

32 J = 4.0g * c * (45ᵒC - 5ᵒC)

Simplifying the equation, we get:

c = 32 J / (4.0g * 40ᵒC)

c = 0.20 J/g°C

Therefore, the specific heat of the glass is 0.20 J/g°C.

Know more about Specific Heat here:

https://brainly.com/question/11297584

#SPJ11