The original pressure[P₁] is approximately 0.0848 atm
We can use the combined gas law equation, which relates the initial and final conditions of a gas sample. The combined gas law equation is as follows:
(P₁ × V₁) / (T₁) = (P₂ × V₂) / (T₂)
Given:
V₁ = 33 liters
T₁ = 24 °C = 24 + 273.15 = 297.15 K (converted to Kelvin)
V₂ = 41,000 milliliters = 41 liters (converted to liters)
T₂ = 13 °C = 13 + 273.15 = 286.15 K (converted to Kelvin)
P₂ = 2.7 atm
We need to find P₁, the original pressure.
Plugging in the values into the combined gas law equation:
(P₁ × 33) / (297.15) = (2.7 × 41) / (286.15)
Simplifying the equation:
33P₁ = (2.7 × 41 × 297.15) / (286.15)
33P₁ ≈ 2.804
Dividing both sides by 33:
P₁ ≈ 2.804 / 33
P₁ ≈ 0.0848 atm
To know more about Gas Law Equation refer to this link
https://brainly.com/question/25736513
what the answer to this
Compared to the freezing point and boiling point of water at 1 atmosphere, a solution of salt and water at 1 atmosphere has a option b. lower freezing point and a higher boiling point.
When a solute, such as salt, is added to water, it affects the properties of the solution, including its freezing and boiling points. Adding salt to water lowers the freezing point and raises the boiling point compared to pure water at the same pressure.
Lower Freezing Point: The presence of salt disrupts the formation of ice crystals, making it more difficult for the water molecules to arrange into a solid structure. This results in a lower freezing point for the saltwater solution compared to pure water.
Higher Boiling Point: The dissolved salt particles increase the boiling point of the solution. It requires more energy to break the intermolecular forces between the water and salt molecules, resulting in a higher boiling point for the saltwater solution compared to pure water.
Therefore, option B is correct: a solution of salt and water at 1 atmosphere has a lower freezing point and a higher boiling point compared to pure water.
Know more about boiling point here:
https://brainly.com/question/30282615
#SPJ8
The correct answer is :
Compared to the freezing point and boiling point of water at 1 atmosphere, a solution of salt and water at 1 atmosphere has a
A. lower freezing point and a lower boiling point.
B. lower freezing point and a higher boiling point.
C. higher freezing point and a lower boiling point.
D. higher freezing point and a higher boiling point.
write the structural formula for 6-Ethyl-4, 7-dimethyl-non-1-ene.
The structural formula for 6-Ethyl-4,7-dimethyl-non-1-ene can be represented as follows:
[tex]CH_{3} CH_{3} CH_{3}[/tex]
| | |
[tex]CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{3}[/tex]
| | | | | | |
[tex]CH CH CH CH CH CH CH[/tex]
|
[tex]CH_{2}[/tex]
In this structural formula, the main chain contains nine carbon atoms (non-1-ene) with a double bond (ene) located at the first carbon atom. Starting from the first carbon atom, we have:
At the sixth carbon atom, there is an ethyl group (CH3CH2-), which means an ethyl group is attached to it.
At the fourth and seventh carbon atoms, there are methyl groups (CH3-), which means a methyl group is attached to each of them.
The remaining carbon atoms in the main chain have a single hydrogen atom (H) attached to them.
This structural formula represents the arrangement of atoms and bonds in the molecule and provides information about the connectivity of the atoms in the compound. It helps visualize the spatial arrangement of the atoms and functional groups, enabling a better understanding of the compound's chemical properties and reactions.
Know more about structural formula here:
https://brainly.com/question/31115811
#SPJ8
A student carried out an experiment to find the mass of FeSO4.7H20 in an impure sample, X. The student recorded the mass of X. This sample was dissolved in water and made up to 250cm^3 of solution. The student found that, after an excess of acid had been added, 25.0cm^3 of this solution reacted with 21.3cm^3 of a 0.0150 moldm^-3 solution of K2Cr2O7. Use this information to calculate a value for the mass of FeSO4.7H20 in the sample X.
I understand the calculations part of the question, but i never understood how to work out the equation involved, which is:
6Fe2+ + Cr2O72- + 14H+ --> 6Fe3+ +2Cr3+ +7H2O
How do i work this out? Why are there 6 moles of Fe2+? what does it mean if there is an impurity, X? i am just really confused about this question if someone could elaborate clearly i will be really happy, thanks
I understand that you're looking for clarification on the balanced chemical equation and the concept of impurities. Let's break it down.
1. Balanced chemical equation:
The given balanced equation is:
6Fe2+ + Cr2O72- + 14H+ → 6Fe3+ + 2Cr3+ + 7H2O
To understand why there are 6 moles of Fe2+, you need to recognize that the coefficients in a balanced chemical equation represent the stoichiometric ratios between reactants and products. In this redox reaction, the Fe2+ ions are being oxidized to Fe3+ ions, and the Cr2O72- ions are being reduced to Cr3+ ions. The balanced equation is derived through balancing the charges and atoms on both sides of the equation, ensuring that the number of electrons transferred in the redox process is equal.
2. Impure sample X:
The problem states that the sample X is an impure sample of FeSO4.7H2O. This means that the sample contains FeSO4.7H2O as well as other substances (impurities) which do not participate in the reaction. These impurities do not affect the stoichiometry of the reaction but may contribute to the mass of the sample. The goal of the problem is to determine the mass of FeSO4.7H2O in the sample, disregarding the impurities.
Now, let's carry out the calculations to find the mass of FeSO4.7H2O in the sample X:
1. From the balanced equation, we know that 6 moles of Fe2+ react with 1 mole of Cr2O72-.
2. Calculate the moles of Cr2O72- used in the reaction from the volume and concentration of K2Cr2O7 solution:
Moles of Cr2O72- = Volume (dm^3) × Concentration (mol/dm^3)
Moles of Cr2O72- = 0.0213 dm^3 × 0.0150 mol/dm^3 = 3.195 × 10^-4 mol
3. Calculate the moles of Fe2+ in the 25.0 cm^3 aliquot of the 250 cm^3 FeSO4 solution:
Moles of Fe2+ = 6 × Moles of Cr2O72-
Moles of Fe2+ = 6 × 3.195 × 10^-4 mol = 1.917 × 10^-3 mol
4. Calculate the moles of Fe2+ in the entire 250 cm^3 FeSO4 solution:
1.917 × 10^-3 mol (in 25.0 cm^3) × (250 cm^3 / 25.0 cm^3) = 0.01917 mol
5. Calculate the mass of FeSO4.7H2O in the sample X:
Mass = Moles × Molar mass
Mass = 0.01917 mol × (151.91 + 7 × 18.015) g/mol = 0.01917 mol × 278.015 g/mol = 5.33 g (approximately)
Thus, the mass of FeSO4.7H2O in the impure sample X is approximately 5.33 g.
The atom spectrum have a wavelength in 1212.7 A and 6562.8 A. These two lines result from transition in different series, one with nr 1 & the other with n-2. Identify n, for each line.
The wavelength of 1212.7 Å corresponds to an electronic transition from n=1 to n=2, while the wavelength of 6562.8 Å does not have enough information to determine the value of n.
In atomic spectra, the wavelength of spectral lines corresponds to specific electronic transitions within an atom. Each line is associated with a particular energy level transition, which is characterized by the principal quantum number (n) of the electronic orbitals involved.
Let's analyze the given wavelengths:
Wavelength of 1212.7 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. We need to find the values of n for this transition.
We know that the Balmer series in the hydrogen atom is defined by transitions from higher energy levels to the n=2 level. Therefore, the wavelength of 1212.7 Å corresponds to an electronic transition within the Balmer series. From the Balmer series formula,
1/λ = R_H * [tex](1/2^2 - 1/n^2[/tex]), where R_H is the Rydberg constant for hydrogen, we can solve for n. Rearranging the formula, we get:
1/λ = R_H * (1/4 - 1/[tex]n^2[/tex])
1/λ = R_H/n^2 - R_H/4
1/λ + R_H/4 = R_H[tex]/n^2[/tex]
1/λ + 109677 cm^-1 = 109677 cm^-1/n^2
Substituting the value of the wavelength (1212.7 Å = 121270 nm = 12127000 Å) into the equation, we can solve for n:
1/12127000 + 109677 cm^-1 = 109677 cm^-1/n^2
[tex]n^2[/tex] = 109677 cm^-1 / (1/12127000 + 109677 cm^-1)
[tex]n^2[/tex]≈ 109677 cm^-1 / 109678 cm^-1
n ≈ sqrt(1) ≈ 1
Therefore, the electronic transition corresponding to the wavelength of 1212.7 Å is from n=1 to n=2.
Wavelength of 6562.8 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. To determine the value of n for this transition, we can use a similar approach as before. However, since the wavelength is not specified further, we cannot determine the exact series or atom.
Different atoms or series can have transitions that produce the same wavelength. Without additional information, we cannot pinpoint the specific value of n for this wavelength.
For more such questions on wavelength visit:
https://brainly.com/question/28995449
#SPJ8
pls pls help me plssss
4. Styrene (A) and Butadiene (B) are to be polymerized in a
series of mixed-flow reactors, each of volume 25 m3. The rate
equation is first order with respect to A and B:
−rA = kACACB
where kA = 10−5 m3·kmol−1·s−1
The initial concentration of styrene is 0.8 kmol·m−3 and
of butadiene is 3.6 kmol·m−3. The feed rate of reactants
is 20 t·h−1. Estimate the total number of reactors required
for polymerization of 85% of the limiting reactant. Assume
the density of reaction mixture to be 870 kg·m−3 and the
molar mass of styrene is 104 kg·kmol−1 and that of butadiene
54 kg·kmol−1
The total number of reactors required for polymerization of 85% of the limiting reactant is 4.
The calculation of the total number of reactors required for polymerization of 85% of the limiting reactant for Styrene (A) and Butadiene (B) is explained below.
Given data: Volume of each reactor, V = 25 m³.
The rate equation is, -rA = kACACB ,where kA = 10⁻⁵ m³·kmol⁻¹·s⁻¹
Initial concentration of Styrene = CA0 = 0.8 kmol·m⁻³ .Initial concentration of Butadiene = CB0 = 3.6 kmol·m⁻³
Feed rate of reactants = 20 t·h⁻¹Density of reaction mixture = ρ = 870 kg·m⁻³
Molar mass of Styrene = MStyrene = 104 kg·kmol⁻¹Molar mass of Butadiene = MButadiene = 54 kg·kmol⁻¹
The limiting reactant in the polymerization is the reactant that gets consumed first. Let's assume that Butadiene is the limiting reactant since it has the lowest initial concentration.
Mass balance equation for Butadiene,
FA0 = CA0.V.QFA = ρ.V.Q.CB
Where FA0 is the initial flow rate of Styrene, Q is the total volumetric flow rate of reactants.
Since the reaction is first-order with respect to both Styrene and Butadiene,-rA = -rB = kACACBVolume of reactant fed in 1 h = Q × 3600s = 20,000 kg
For a batch of 85% limiting reactant conversion,
Total moles of Butadiene fed in 1 h, nB = CB0.V.Q × 3600 × 0.85
Moles of Styrene required to react with 85% of Butadiene, n
Styrene = nB (MButadiene/MStyrene) = 15.08 V.Qkg
Number of moles of Styrene per reactor required to reach the above requirement in 1 h,
nStyrene/reactor = nStyrene/Total Number of Reactors Total Volume of all Reactors= nStyrene/ (Total Volume of Reactors/V)
Number of Reactors required = Total Volume of Reactors / V = nStyrene / (nStyrene/reactor) = 15.08 V.Qkg / (CA0 × V × kA × CB0) ≈ 3.36 → 4Reactors Hence, the total number of reactors required for polymerization of 85% of the limiting reactant is 4.
Know more about polymerization here:
https://brainly.com/question/1602388
#SPJ8
Calculate the Standard Free Energy Change at 25℃ given the Equilibrium constant of 1.3 × 104.
The standard free energy change at 25℃ is -2.48 × 10⁴ J/mol.
The equation linking Gibbs free energy change and equilibrium constant is given by the following equation:
ΔG° = -RT ln K(where, ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin and K is the equilibrium constant)
Substituting the given values:Equilibrium constant, K = 1.3 × 10⁴
Standard temperature, T = 25℃ = 298K
Substituting the values in the equation of Gibbs free energy change:
ΔG° = -RT ln K=-8.31 J K⁻¹ mol⁻¹ × 298 K × ln 1.3 × 10⁴
= -8.31 J K⁻¹ mol⁻¹ × 298 K × 9.480
= -2.48 × 10⁴ J/mol (Approx)
Therefore, the standard free energy change at 25℃ is -2.48 × 10⁴ J/mol.
Know more about equilibrium here:
https://brainly.com/question/18849238
#SPJ8
A scientist wants to make advances in the way skin cancer patients are
treated. What is something she should do first?
To make advances in the way skin cancer patients are treated, a scientist should first conduct thorough research and gather relevant information.
Review existing literature: The scientist should study the current scientific literature on skin cancer treatment, including the latest research, clinical trials, and treatment options. This will provide a foundation of knowledge and help identify gaps or areas that need improvement.
Understand the current challenges: It is important for the scientist to have a comprehensive understanding of the challenges faced by skin cancer patients and healthcare providers in existing treatment methods. This can involve analyzing the limitations of current therapies, side effects, recurrence rates, and patient outcomes.
Identify unmet needs: Through research and engagement with dermatologists, oncologists, and patients, the scientist should identify specific unmet needs in skin cancer treatment. This can include areas such as early detection methods, personalized therapies, targeted drug delivery, or improving the effectiveness of existing treatments.
Collaborate with multidisciplinary teams: Skin cancer treatment often requires collaboration between various specialists, including dermatologists, oncologists, surgeons, and researchers. The scientist should establish collaborations with experts from different disciplines to gain diverse perspectives and insights.
Conduct preclinical and clinical research: Once the specific objectives are identified, the scientist should design and conduct preclinical studies to explore potential treatment approaches. This can involve laboratory experiments, animal models, and in vitro studies.
Evaluate safety and efficacy: During clinical trials, the scientist should rigorously evaluate the safety and efficacy of the new treatment approach. This includes monitoring patient responses, side effects, and overall outcomes.
Analyze and disseminate results: The scientist should carefully analyze the data collected during the research and communicate the findings through scientific publications, conferences, and collaborations.
For more such questions on scientist visit:
https://brainly.com/question/29886197
#SPJ8
Batteries have potential energy in their __________ energy stores. What one word completes the sentence?
Batteries have potential energy in their chemical energy stores.
The one word that completes the sentence is "chemical." Batteries store potential energy in the form of chemical energy. This means that the energy is stored within the chemical components of the battery.
Here's a step-by-step explanation:
1. Batteries are devices that convert chemical energy into electrical energy.
2. Chemical energy is the energy stored within the chemical bonds of a substance.
3. In the case of batteries, this chemical energy is stored in the chemical components of the battery, such as the electrolyte and the electrodes.
4. When a battery is connected to a circuit, a chemical reaction takes place within the battery, causing the stored chemical energy to be converted into electrical energy.
5. This electrical energy can then be used to power electronic devices or perform other tasks.
To summarize, batteries store potential energy in their chemical energy stores. This potential energy is converted into electrical energy when the battery is used.
For more such questions on potential energy
https://brainly.com/question/13997830
#SPJ8
If the pH of a solution is 4.5 and the other pH of another solution is 7.9, what are the solutions for pH, pOH, [H+], and [OH-]?
For the solution with a pH of 7.9:
pH = 7.9
pOH = 14 - pH = 14 - 7.9 = 6.1
[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)
The pH of a solution is a measure of its acidity, while pOH is a measure of its alkalinity. The pH and pOH values are related through the equation pH + pOH = 14.
For the solution with a pH of 4.5:
pH = 4.5
pOH = 14 - pH = 14 - 4.5 = 9.5
[H+] = 10^(-pH) = 10^(-4.5) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-9.5) (in mol/L)
For the solution with a pH of 7.9:
pH = 7.9
pOH = 14 - pH = 14 - 7.9 = 6.1
[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)
Note: The [H+] and [OH-] concentrations can also be calculated using the equation [H+][OH-] = 1 x 10^(-14) at 25°C.
For more questions on alkalinity, click on:
https://brainly.com/question/867708
#SPJ8
Two reactants combine to form a product in the reaction A + BC. The rate of the
reaction depends on the concentrations of both reactants squared (rate = K[A]²[B]²).
What's the total reaction order of this reaction?
OA) 3
OB) 4
OC) 2
OD) 1
a. Identify the structures shown in the diagram. b. Identify the information that is contained within these structures. c. Describe how the structures from this cell would compare to the structures in the nucleus of another body cell from the same person. d. Explain why the structures are in pairs.
The answer responses to the structures shown in the diagram are:
A. chromosomes
C. They would be the same.
B. They are in pairs because each one comes from a different parent.
What is the structure about?The chromosomes are in pairs because humans have a diploid number of chromosomes, meaning they have two sets of chromosomes, one inherited from each parent.
The nucleus is important in eukaryotic cells and has many important parts that help the cell work properly. There are some parts inside cells called the nuclear membrane, nucleoplasm, nucleolus, and chromatin. Chromatin is made up of DNA and other proteins.
Every part of a person's body has the same genes, but the way they are organized can be different in different types of cells. The chromosomes in our skin cells might not be the same as the chromosomes in our muscle cells, even if they come from the same person.
Learn more about nucleus from
https://brainly.com/question/9376695
#SPJ1
Identify the structures shown.
A. chromosomes
B. mitochondria
C. nuclei
D. vacuoles
C
Describe how the structures from this cell would compare to the structures in the nucleus of another body cell from the same person.
A. There would be longer.
B. They would be shorter.
C. They would be the same.
D. They would be different.
Describe how the structures from this cell would compare to the structures in the nucleus of another body cell from the same person.
A. There would be longer.
B. They would be shorter.
C. They would be the same.
D. They would be different.
Explain why the structures are in pairs.
A. They aren't in pairs.
B. They are in pairs because each one comes from a different parent.
C. This cell is making a copy of itself.
D. The cell always has 2 copies in case 1 is damaged.
what three forces are in tug of war?
With the aid of a clearly labelled diagram, explain the effect of increasing temperature on an enzyme catalyzed reaction.
Raising the temperature enhances the reaction rate by increasing the kinetic energy of the enzyme and substrate molecules.
What is an enzyme?An enzyme, a biological catalyst, plays a crucial role in accelerating the pace of chemical reactions. Enzymes, predominantly composed of proteins, possess remarkable specificity in the reactions they catalyze.
This specificity arises from the structural configuration of the enzyme, which complements the shape of the substrate—the specific molecule subjected to enzymatic catalysis.
Learn about enzymes here https://brainly.com/question/14577353
#SPJ1
8) After school, you stop into Speedway to get a fountain drink. When you push on the lever to
expel your soda pop, it just drips out. The manager tells you that his fountain machine is set at
12°C for 450 mL of pop at an unknown pressure. Being a curious chemistry student, you decide
to investigate: Fountain drinks should be an average temperature of 5°C for 355mL at a pressure
of 7psl. What pressure does the manager have his pop machine set at in both psi & atm?
The pressure (P) of the manager's pop machine is 0.38 psi or 0.026 atm.
Given the following values:
Temperature (T) = 12 °C
Volume (V) = 450 mL = 0.45 L
Pressure (P) = UnknownTemperature (T) = 5 °C
Volume (V) = 355 mL = 0.355 L
Pressure (P) = 7 psi = 0.48 atm
To find the pressure (P) of the manager's pop machine in both psi and atm, we can use the Ideal Gas Law, which is given by: PV = nRT
Where:
P = Pressure V = Volume T = Temperature n = Number of moles R = Universal gas constant
Let's first convert the volume and temperature to SI units.
Volume (V) = 0.45 L
Temperature (T) = 12 + 273 = 285 K
For the first condition, we have: P1V1/T1 = nR/P1V1/T1 = P2V2/T2 (At constant temperature and volume)
P2 = P1(V2/V1)
For the second condition, we have: P1V1/T1 = P2V2/T2P2 = (P1V1T2)/(V2T1)
Now, let's plug in the values.P1 = ?V1 = 0.45 LT1 = 285 KP2 = 7 psi = 0.48 atmV2 = 0.355 LT2 = 278 K (5°C + 273)
First, we'll find the pressure (P) in psi. P2 = P1(V2/V1)0.48 = P1(0.355/0.45)P1 = 0.38 psi
To convert psi to atm, we use the following conversion factor: 1 atm = 14.7 psi0.38 psi x (1 atm/14.7 psi) = 0.026 atm.
for such more questions on pressure
https://brainly.com/question/24719118
#SPJ8
Which chemical equation represents a precipitation reaction ?
A precipitation reaction is a chemical reaction in which a solid forms when two aqueous solutions are mixed. The correct answer is option B: [tex]K_2CO_3 + PbCl_2 \rightarrow 2KCl + PbCO_3.[/tex]
This is because, in this reaction, two aqueous solutions ([tex]K_2CO_3[/tex] and PbCl₂) are mixed to form a solid precipitate ([tex]PbCO_3[/tex]) and two aqueous solutions (KCl and [tex]PbCO_3[/tex]).The reaction can be written in a chemical equation as [tex]K_2CO_3 + PbCl_2 \rightarrow 2KCl + PbCO_3.[/tex] The reactants in this equation are [tex]K_2CO_3[/tex] and PbCl₂ and the products are 2KCl and [tex]PbCO_3[/tex]. The subscript "aq" is used to denote that the substance is in an aqueous state, which means it is dissolved in water. Therefore, the correct answer is option BThe reaction can be understood by looking at the ionic equation: [tex]K_2CO_3 + PbCl_2 \rightarrow 2KCl + PbCO_3\downarrow[/tex]. The ionic equation shows that PbCO3 is a precipitate, indicated by the downward arrow, while [tex]K^+[/tex] and [tex]Cl^-[/tex] remains in solution.The other options given in the question do not represent precipitation reactions because there is no formation of a solid precipitate when the reactants are mixed together.For more questions on a precipitation reaction
https://brainly.com/question/30386923
#SPJ8
How many hydrogen atoms could bong with oxygen in this illustration of an oxygen atom?
C. 2, hydrogen atoms could bong with oxygen in this illustration of an oxygen atom.
In the given illustration of an oxygen atom, there are two unpaired electrons in the outermost electron shell. Each oxygen atom can form a covalent bond by sharing one electron with another atom. In the case of oxygen, it has a valence of 2, which means it can form up to two covalent bonds. Each hydrogen atom has one electron, and it requires one additional electron to complete its outermost electron shell.
Therefore, in the given illustration, the oxygen atom can form two covalent bonds with hydrogen atoms. This is represented by the formula H2O, where one oxygen atom is bonded to two hydrogen atoms.
Hence, the correct answer is C. 2. Two hydrogen atoms can bond with one oxygen atom to form a stable molecule of water. The sharing of electrons in covalent bonds allows atoms to achieve a more stable electron configuration and form compounds with different properties.
The question was incomplete. find the full content below:
How many hydrogen atoms could bong with oxygen in this illustration of an oxygen atom?
A. 0
B. 1
C. 2
D. 6.
Know more about covalent bonds here:
https://brainly.com/question/3447218
#SPJ8
What is the frequency of a photon if the energy is 5.27 × 10⁻¹⁹ J? (h = 6.626 × 10⁻³⁴ J • s)
Answer:
To calculate the frequency of a photon with energy of 5.27 × 10⁻¹⁹ J, we can use the equation E = hf, where E is the energy of the photon, h is Planck's constant (6.626 × 10⁻³⁴ J • s), and f is the frequency of the photon. Solving for f, we get:
f = E/h = (5.27 × 10⁻¹⁹ J)/(6.626 × 10⁻³⁴ J • s) = 7.95 × 10¹⁴ Hz
Therefore, the frequency of the photon is 7.95 × 10¹⁴ Hz.
Explanation:
How many moles of hydrogen will form if 3.0 mole of potassium metal reacts completely with hydrochloric acid?
Answer:
1.5 moles of hydrogen will form if 3.0 mole of potassium metal reacts completely with hydrochloric acid.
Explanation:
The balanced chemical equation for the reaction of potassium metal with hydrochloric acid is:
2K(s) + 2HCl(aq) → 2KCl(aq) + H2(g)
As per the above equation, 2 moles of potassium reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas.
So, for 3.0 moles of potassium metal react with hydrochloric acid, we can say that it will produce 3.0/2 = 1.5 moles of hydrogen gas.
Therefore, 1.5 moles of hydrogen will form if 3.0 mole of potassium metal reacts completely with hydrochloric acid.
Acid name hydroiodic acid chemical formula
Answer:
HI is the formula of hydroiodic acid
Explanation:
hope it helps you
A spatula of sodium hydrogen carbonate was placed in a boiling tube.lemon juice was added dropwise while shaking until no other change was seen. Give the expected observation and explain it
Answer:
When sodium hydrogen carbonate (also known as baking soda) reacts with lemon juice (which is acidic), a chemical reaction occurs. The expected observations and the explanation for each observation are as follows:
1. Effervescence (bubbling): As the lemon juice (citric acid) reacts with sodium hydrogen carbonate, carbon dioxide gas is produced. This gas escapes as bubbles, leading to effervescence. The reaction can be represented as follows:
Sodium Hydrogen Carbonate + Citric Acid → Carbon Dioxide + Water + Sodium Citrate
2. Release of a citric-like odor: When citric acid from the lemon juice reacts with the sodium hydrogen carbonate, it forms sodium citrate, which has a fruity odor similar to citric acid.
3. Change in color or formation of foam: Depending on the specific lemon juice used, there might be a color change or the formation of foam due to the interaction between the citric acid and the baking soda. This observation can vary depending on the concentration of the lemon juice and the amount of baking soda used.
4. No further visible change: Once the reaction is complete, there will be no other visible changes. The carbon dioxide gas produced during the reaction will dissipate into the air, and the solution will reach a new equilibrium.
Overall, the reaction between sodium hydrogen carbonate and lemon juice is an acid-base reaction, resulting in the production of carbon dioxide gas. This reaction is commonly used in baking to create a leavening effect and make baked goods rise.
Calculate the mass of wire that reacted to silver nitrate solution Mass being 1.52 of copper before reaction
The mass of wire that reacted to silver nitrate solution is 5.15 grams.
To calculate the mass of the wire that reacted with silver nitrate solution, we need to consider the stoichiometry of the reaction. The reaction between copper and silver nitrate can be represented by the following equation:
Cu + 2AgNO3 → Cu(NO3)2 + 2Ag
According to the equation, one mole of copper reacts with two moles of silver nitrate to form one mole of copper(II) nitrate and two moles of silver.
Given that the mass of copper before the reaction is 1.52 grams, we can calculate the molar mass of copper using its atomic mass, which is 63.55 grams/mol.
1.52 g of copper is equal to 1.52 g / 63.55 g/mol = 0.0239 moles of copper.
Since the reaction stoichiometry is 1:2 between copper and silver, the moles of copper reacting would be equal to half of the moles of silver formed.
Therefore, the moles of silver formed would be 0.0239 moles x 2 = 0.0478 moles.
To find the mass of silver, we multiply the moles of silver by its molar mass, which is 107.87 grams/mol:
Mass of silver = 0.0478 moles x 107.87 g/mol = 5.15 grams.
Hence, the mass of wire that reacted to silver nitrate solution is 5.15 grams.
For more questions on atomic mass, click on:
https://brainly.com/question/30390726
#SPJ8
I think it is the question:
A copper wire with a mass of 1.52 grams reacted with silver nitrate solution. If the balanced chemical equation and the molar ratio between copper and silver nitrate are provided, how can you determine the mass of wire that reacted?
which number is correctly expressed in scientific notation
Answer:
x*10ⁿ (units)
Explanation:
Scientific notation never has leading or trailing zeros.
0.0064 would be expressed as 6.4*10³
6400 would be expressed as 6.4*10³
multiplying by 10 to an exponent just adds or subtracts zeros, so count how many zeros have to be added or subtracted, and multiply by 10ⁿ, where n is how far from the decimal point.
An aqueous solution of 4mol/L nitric acid is eletrolysed in an electrolytic cell using graphite electrodes. Write the chemical symbols for all the ions present in the electrolytic cell.
Electrolysis of nitric acid produces hydrogen gas at the cathode and nitrogen dioxide, oxygen gas, and hydrogen ions at the anode.
When an aqueous solution of 4mol/L nitric acid is electrolyzed in an electrolytic cell using graphite electrodes, the following chemical symbols for all the ions present in the electrolytic cell are obtained:A) The anode equation: 2HNO₃ → 2NO₂ + O₂ + 2H⁺ + 2e⁻The anions present in the electrolytic cell include nitrate ions (NO₃⁻) and chloride ions (Cl⁻). The nitrate ions, which are the conjugate base of nitric acid (HNO₃), are attracted to the anode where they lose electrons to produce nitrogen dioxide (NO₂), oxygen gas (O₂), and hydrogen ions (H⁺). Nitric oxide (NO) and nitrogen gas (N₂) can also be formed as by-products.B) The cathode equation: H⁺ + e⁻ → 1/2H₂The cations present in the electrolytic cell include hydrogen ions (H⁺) and nitrate ions (NO₃⁻). Hydrogen ions (H⁺) in the electrolytic cell are reduced by gaining electrons at the cathode to produce hydrogen gas (H₂). Nitrate ions (NO₃⁻) from nitric acid are not reduced at the cathode but migrate toward the anode. In summary, nitric acid, when electrolyzed in an electrolytic cell using graphite electrodes, produces hydrogen gas at the cathode and nitrogen dioxide, oxygen gas, and hydrogen ions at the anode. The conjugate base of nitric acid, nitrate ions, is present as anions in the electrolytic cell. The cations present in the electrolytic cell are hydrogen ions and nitrate ions.For more questions on Electrolysis
https://brainly.com/question/12994141
#SPJ8
7. [day Dr. Linus Pauling says that if you take 1500. mg of vitamin C each day you will have milder and fewer colds. How many pounds per year is this? (assume 365 days per year)
Taking 1500 mg of vitamin C daily amounts to approximately 1.2045 pounds per year.
Dr. Linus Pauling suggested that taking 1500 mg of vitamin C daily could result in milder and fewer colds. To determine the weight in pounds per year, we'll first convert milligrams to pounds and then multiply by the number of days in a year.
To convert milligrams to pounds, we need to know that there are 453,592.37 milligrams in a pound. Therefore, 1500 mg is equal to 0.0033 pounds (1500 mg / 453,592.37 mg/lb).
Now, to calculate the weight in pounds per year, we'll multiply 0.0033 pounds by the number of days in a year (365).
Weight in pounds per year = 0.0033 pounds/day * 365 days/year = 1.2045 pounds/year.
Therefore, taking 1500 mg of vitamin C daily amounts to approximately 1.2045 pounds per year.
It's important to note that while this calculation provides the weight equivalent, the effectiveness and recommended dosage of vitamin C for preventing colds should be discussed with a healthcare professional, as individual needs may vary.
For more questions on vitamin C, click on:
https://brainly.com/question/24268138
#SPJ8
5. Which of the functional groups contain(s) nitrogen?
Explanation:
Functional groups containing nitrogen are amines and amides.
The general formula for amines is:
RNH₂, where R = longer hydrocarbon chain.
The general formula for amides is:
RCONH₂, where R = longer hydrocarbon chain.
See attached diagram for general structural formula.
To learn more about amines and amides:
https://brainly.com/question/30401860
What is the molar mass of N2CO3
Answer:105.99 g/mol
Explanation:
Sodium carbonate is the inorganic compound with the formula Na₂CO₃ and its various hydrates. All forms are white, odourless, water-soluble salts that yield alkaline solutions in water.
Trend of atomic number and atomic size of the elements when we move from left to right in different periods of periodic table
Answer:
The atomic size decreases with an increase in atomic number when we move from left to right.
Explanation: Hope it helps you:))))))
Have a great day.
Science Question!
Please order by correct order if Answer and please be Real!
Answer:
matter undergoes
chemical changes such as burning and rusting.
physical changes such as evaporating and melting.
matter has
chemical properties such as reacting with oxygen and changing when heated.
physical properties such as luster and volume.
Express the quantity 102,455 m in each unit.
1. nm
2.Mm
3.cm
Express your answer innanometers to six significant figures.
To express 102,455 m in different units: 102,455,000,000 nm, 0.102455 Mm, and 10,245,500 cm.
Explanation:To express the quantity 102,455 m in each unit:
nm: To convert meters to nanometers, multiply by 1,000,000,000. Therefore, 102,455 m is equivalent to 102,455,000,000 nm.Mm: To convert meters to megameters, divide by 1,000,000. Therefore, 102,455 m is equivalent to 0.102455 Mm.cm: To convert meters to centimeters, multiply by 100. Therefore, 102,455 m is equivalent to 10,245,500 cm.Learn more about Unit Conversion here:https://brainly.com/question/32030244
#SPJ2