The evidence that would best support that the unknown sample is a living thing is that the sample is made of cells and is using energy (option A).
What are living things?Living things are classes of things that contains life in them.
According to this question, a student is using a microscope to observe samples taken from pond water. The student notices something that she thinks may be a living thing.
In order to confirm if this unknown sample is a living thing, it must conform to the cell theory, which states that all living things are made up of one or more cells.
Therefore, the evidence that would best support that the unknown sample is a living thing is that the sample is made of cells and is using energy.
Learn more about living things at: https://brainly.com/question/1987421
#SPJ1
Name
Between August 24, 15:00, and August 26, 03:00, the wind speed for
Hurricane Andrew remained essentially the same. Where was
Hurricane Andrew located during this period of time?
Answer:
Andrew made landfall at 5 a.m. as a Category 5 — at the time only the third Category 5 to land on U.S. soil — just south of Miami with top winds at 165 mph and a 16.9-foot storm surge
Explanation:
Why is it important to water your house plants?
So they can have nutrients from the water to keep it from not dying
Answer:
Plants need water to grow. Plants are about 80-95% water and need water for multiple reasons as they grow including for photosynthesis, for cooling, and to transport minerals and nutrients from the soil and into the plant.
pls help!
EXPERIMENTAL QUESTION: How does the amount of substance affect the rate at which temperature changes?
HYPOTHESIS: If the mass of a sample of water is increased, then the rate at which its temperature changes will be ____________________.
increased
decreased
Answer:
I'm guessing you are asking for the word that will make the hypothesis correct. In that case, it would be:
"If the mass of a sample of water is increased, then the rate at which it's temperature changes will be decreased."
Explanation:
Mass and temperature have an inverse relationship, so when one of the values increase, the other decreases. On Study.com there is more on this subject. I will put a link for you :)
https://homework.study.com/explanation/how-does-the-amount-of-a-substance-affect-the-rate-at-which-temperature-changes.html#:~:text=For%20a%20given%20amount%20of,a%20smaller%20increase%20in%20temperature.
I hope this helps!
Pls guy's.
state the periodic law. I need it now
Explanation:
The Periodic Law states that the physical and chemical properties of the elements recur in a systematic and predictable way when the elements are arranged in order of increasing atomic number. Many of the properties recur at intervals. When the elements are arranged correctly, the trends in element properties become apparent and can be used to make predictions about unknown or unfamiliar elements, simply based on their placement on the table.
Answer:
The periodic law states that, "properties of the elements very periodically with their Relative Atomic Mass
Explanation:
Then the modern periodic law states that, "The chemical and physical properties of element are a periodic function of the atomic number"
Hope it helps
24. The density of silver at 20 °C is
10.5 g/cm³. What is the
volume of a 68-g bar of silver?
volume=6.5cm³
Explanation:
density= mass/ volume
volume= mass/ density
= 68/10.5
=6.5cm³
triaryl-1,3,5-triazinane-2,4,6-triones (isocyanurates) peripherally functionalized by donor groups: synthesis and study of their linear and nonlinear optical properties
the synthesis study of triaryl-1,3,5-triazinane-2,4,6-triones is functionalized by d6-transition metal acetylides complexes at their periphery .
triaryl-1,3,5-triazinane-2,4,6-triones (isocyanurates) peripherally functionalized by donor groups: The linear optical (LO) and nonlinear optical (NLO) properties of a series of isocyanurates functionalized by donor's arms at the periphery. These octupolar derivatives were obtained from commercial isocyanate derivatives several of these derivatives exhibit remarkable transparency or activity/ tradeoffs. In third‐order activity, the stronger donor groups (X=NH2, NMe2, or NPh2) with the longer derivatives possess effective two‐photon absorption cross sections displayed for the extended arylamino cyclotrimers. to rationalize their non linear properties and unravel their electronic structures DFT computations were also performed.
To know more about isocyanurates refer to the link https://brainly.com/question/27507786?referrer=searchResults.
#SPJ4
Select the correct answer. what is tempera? a. pigment mixed with egg yolk as a binder. b. pure, undiluted pigment. c. pigment made from zinc and cobalt.
The correct answer is (A) pigment mixed with egg yolk as a binder.
A natural emulsion that is water-soluble, such as glue, honey, milk in the form of casein, or a variety of plant-based gums, can hold pigment in tempera, a painting media.
Using tempera, you can blend the essential colours as you go while creating the paint from scratch. Although it should be noted that some pigments require more binder than others and that the more egg added, the more transparent the resultant paint will be, mixes should begin with an equal volume of pigment and binder.
From the early 1500s, when oil paints started to gain popularity, tempera served as the main painting medium, it was employed for icon painting and painted panels in churches, and it is still utilised today.
To learn more about emulsion, refer this link.
https://brainly.com/question/6711819
#SPJ4
what is the simple unit factor that relates the number of hydrogens in sucrose to the number of oxygens?
The simple unit factor that relates the number of hydrogens in sucrose to the number of oxygens is:
2 moles hydrogen = 1 mole of oxgen
Formula of sucroseThe formula of sucrose is given as follow:
C₁₂H₂₂O₁₁
From the formula, we obtained the following
12 moles of carbon22 moles of hydrogen11 moles of oxygen How to determine the unit that relates hydrogen and oxygen1 mole of C₁₂H₂₂O₁₁ contains:
22 moles of hydrogen11 moles of oxygenThus, the unit factor that relates hydrogen and oxygen can be obtained as follow:
Hydrogen / Oxygen = 22 / 11
Hydrogen / Oxygen = 2 / 1
Thus,
2 moles hydrogen = 1 mole of oxgen
Thus, for every mole of oxygen, there are 2 moles of hydrogen
Learn more about ratios in organic compounds:
https://brainly.com/question/7341200
#SPJ1
under one set of conditions, the substances in a and b mix and the result is depicted in c. does this represent a chemical or a physical change?chemical changephysical changeb) under a second set of conditions, the same substances mix and the result is depicted in d. does this represent a chemical or a physical change?chemical changephysical changec) under a third set of conditions, the sample depicted in c changes to that in d. does this represent a chemical or a physical change?chemical changephysical changed) when the change in part (c) occurs, does the sample have different chemical properties? physical properties?yes, different chemical propertiesyes, different physical properties
a) The substances in A and B mix and the result is depicted in C is chemical change.
b) The substances in A and B mix and the result is depicted in D is chemical change.
c) Under a third set of conditions, the sample depicted in C changes to that in D is a kind of physical change.
d) When the change in part (c) occurs both the sample formed have same chemical properties.
In first case,
When the substances A and B mix and the result is depicted in C this implies that A and B react to give another substance C. Since C contain atoms of both A and B therefore, it have different property than A and B. So, it is a kind of chemical change.
In second case,
When the substances A and B mix and the result is depicted in D this implies that A and B react to give another substance D in different set of condition. Since D also contain atoms of both A and B therefore, it also have different property than A and B. So, it is a kind of chemical change.
In third case,
As we know that C and D both formed by the reaction between A and B in different set of conditions. So, we can say that C and D basically differ from each other in terms of state. So, C can be converted into D by either cooling or boiling. So, it is a kind of physical change.
In fourth case,
Since, we found that both C and D are differ in state of matter but they have same Chemical properties as both are formed of A and B. So, we can say that, C and D have same chemical properties but have different Physical properties.
Thus, we concluded that when A and B react to form C and in other case form D it is Chemical change. When C converted into D, it is physical change while both have same chemical properties.
learn more about physical or chemical changes:
https://brainly.com/question/18690541
#SPJ4
Explain the role of photosynthesis in the flow of energy between the plant and the person shown in the diagram.
plant and the person
Sunlight energy can be converted by photosynthesis into chemical energy in the form of carbohydrates, which can then be used by the body for cellular respiration. Humans employ oxygen and carbohydrates, the byproducts of photosynthesis, to create energy, water, and carbon dioxide. Human breath carbon dioxide is used by the plant to complete photosynthesis.
Green plants and certain other organisms convert light energy into chemical energy through a process called photosynthesis. Light energy is gathered and utilized during photosynthesis in green plants to change the water, carbon dioxide, and minerals into oxygen- and energy-rich organic molecules.
It is impossible to overstate the role that photosynthesis plays in sustaining life on Earth. There would soon be little food or other organic materials on Earth if photosynthesis stopped. The majority of life would vanish, and eventually, the atmosphere of Earth would contain almost no gaseous oxygen. Only chemosynthetic bacteria, which can use the chemical energy of specific inorganic substances and are not reliant on the conversion of light energy, would be able to survive in such an environment.
To learn more about photosynthesis please visit-
https://brainly.com/question/1388366
#SPJ9
Which of these is true for a molecular model like the one shown ? A. We can always identify the type of each atom based on color. B. The model shows how the various atoms are connected in the molecule. C. The model shows the actual size of each atom correctly D. The model shows the relative sizes of the atoms to each other.
The true statement about the model is that the model shows how the various atoms are connected in the molecule.
What is a molecular model?A molecular model is a representation of a molecule. We know that the molecular model shows the extent to which the atoms are bonded in the compound. The model gives us an idea of the intricate atom to atom arrangement that exists in the molecule that is under study.
Now we know that the atoms that are in the models must be shown by the use of different colors. This enables us to be able to effectively and properly distinguish between the atoms of the compound as shown in the model.
The true statement about the model is that the model shows how the various atoms are connected in the molecule.
Learn more about molecular models:https://brainly.com/question/156574?
#SPJ1
Work Right, Work Safe at School and at Home
A laboratory is any area where science investigation occurs. Even your kitchen can be considered as one. What laboratory tools or equipment can be substituted with kitchen-wares? Choose five tools found in the laboratory and give a kitchenware that can serve as a substitute for each.
Laboratory Tools Kitchen-wares Substitute
Name:
Drawing/Illustration:
Use:
Name:
Drawing/Illustration:
Use:
Name:
Drawing/Illustration:
Use:
Name:
Drawing/Illustration:
Use:
Name:
Drawing/Illustration:
Use:
QUESTIONS:
1. Why is it important to know the use of laboratory tools and equipment? Give at least two reasons.
2. Why must working safe be practice in the laboratory?
A. Hot Plate - Materials are heated using hot plates. A stove may readily take the place of this equipment.
B. Test Tube Holder - Kitchen tongs, which come in various sizes, can be utilized in the absence of test tube holders.
C. Beakers and flasks are used for both measuring liquids and combining various ingredients. At home, measuring cups and measuring spoons can take their place because they are wide or tall enough to be used for mixing and still have the ability to be used to measure the ingredients.
D. Stirring Rod - A stirring rod can be replaced by a variety of items. Chopsticks are an example because of their similar shape, as are spoons, ladles, and forks if the container allows them.
E. Funnel - Typically, the material used to make a kitchen funnel and a laboratory funnel is the sole distinction. Kitchen funnels are often made of plastic, whereas laboratory funnels are made of heat-resistant glass. Nevertheless, as long as it is not exposed to extremely high temperatures, it can still perform the duties of a standard laboratory funnel.
1. Before conducting any type of experiment, you should always be familiar with your lab's equipment because, without it, you won't know how to use your materials or how to fix a mistake you might make with it.
2. You may aid in preventing or eliminating hazards by being familiar with the laboratory you're working in and by constantly adhering to the correct safety protocols. Additionally, you'll be aware of what to do in the unfortunate case that something goes wrong.
To learn more about laboratory tools refer- https://brainly.com/question/13231667
#SPJ9
hydrogen fuel can be produced from methane or by electrolysis of water. as of 2020, the majority of hydrogen (∼95%) is produced from fossil fuels by steam reforming or partial oxidation of methane and coal gasification with only a small quantity by other routes such as biomass gasification or electrolysis of water.
Natural gas contains methane (CH[tex]4[/tex]), which is used to produce hydrogen by thermal processes like stem-methane reformation and partial oxidation.
In steam-methane reforming, which is the most common method to produce hydrogen, high temperature steam (700°C - 1000°C). The pressure required is 3-25 bar pressure, in the presence of a catalyst. Steam reforming is an endothermic process. Carbon monoxide and steam are reacted using catalyst to produce carbon dioxide and hydrogen.
Partial oxidation is an exothermic process. It is much faster than steam reforming. This method initially produces less hydrogen.
These processes are more preferred because the use of petroleum is low and the emissions is also low. Total greenhouse gases emission is cut.
To learn more about hydrogen fuels ;
https://brainly.com/question/22823816
#SPJ4
When methanol, ch3oh, is burned in the presence of oxygen gas, o2, a large amount of heat energy is released. For this reason, it is often used as a fuel in high performance racing cars. The combustion of methanol has the balanced, thermochemical equation.
To produce 807 kJ of heat, 33.85g of methanol ([tex]CH_3OH[/tex]) must be burned.
When -764.0 kJ of heat is involved, 1 mol of methanol, [tex]CH_3OH[/tex] is reacting
Therefore, mol of [tex]CH_3OH[/tex] for -8.07 x [tex]10^2[/tex] kJ:
= -8.07 x [tex]10^2[/tex] x 1/-764.0 kJ
= 1.056 mol
Molar mass of methanol ([tex]CH_3OH[/tex]),
MM = 1 x MM(C) + 4 x MM(H) + 1 x MM(O)
= 1 x 12.01 + 4 x 1.008 + 1 x 16.0
= 32.042 g/mol
mass of methanol ([tex]CH_3OH[/tex]) used:
Mass, m = number of mol x molar mass
= 1.056 mol x 32.04 g/mol
= 33.85 g
Hence, 33.85g of methanol ([tex]CH_3OH[/tex]) must be burned to produce 807kJ of heat.
The complete question is:
When methanol, [tex]CH_3OH[/tex], is burned in the presence of oxygen gas, [tex]O_2[/tex], a large amount of heat energy is released. For this reason, it is often used as a fuel in high performance racing cars. The combustion of methanol has the balanced, thermochemical equation
[tex]CH_3OH (g) + 32O_2 (g) \rightarrow CO_2 (g) + 2H_2O (l)[/tex] Δ= −764 kJ
How much methanol, in grams, must be burned to produce 807 kJ of heat?
Learn more about Methanol here:
https://brainly.com/question/10886248
#SPJ4
Classify each of the following reactions as either exothermic or endothermic: 2H,O(l) + heat → 2H₂(g) + O₂(g)
Answer:
endothermic
Explanation:
It is endothermic since it absorbs heat. If the reaction RELEASED heat (exothermic) the "+ heat" would be on the right side of the equation.
which one of the following carbonyl compounds has the highest percentage of enol when keto-enol equilibrium has been established?
When keto-enol equilibrium has been reached, the compound with the largest percentage of enol is 1,2 cyclo hexanedione.
1,2-cyclohexanedioneThe chemical compound 1,2-cyclohexanedione has the formula (CH2)4(CO)2. It is one of three cyclohexanediones that are isomeric.
It is a substance with no colour that dissolves in a number of organic solvents. It can be made by using selenium dioxide to oxidise cyclohexanone.From this di ketone, numerous diimine and dioxime ligands have been created. In order to produce diaza heterocycles, it condenses with 1,2-diamines.chemical formula: C6H8O21.1305 g/cm3 is the density.Molecular weight: 112.128 g/molCyclohexane-1,2-dione hydrolase, a novel tool to degrade alicyclic molecules, is studied using 1,2-cyclohexanedione as a substrate. Additionally, it serves as a particular reagent for arginine residues.learn more about keto-enol equilibrium here
https://brainly.com/question/4476334
#SPJ4
a mixture of caco₃ and cao has a mass of 2.500 g. after heating, the mass of the sample is reduced to 2.016 g. what is the mass percent of caco₃ in the mixture? caco₃(s) → cao(s) co₂(g)
There is 44 % of CaCO3 in the mixture
Step 1: Data given
Mass of mixture = 2.500 grams
Mass after heating = 2.016 grams
Step 2: The balanced equation
CaCO3 → CO2 + CaO
Step 3: Calculate mass CO2 lost
Mass CO2 lost = Mass before heating - mass after heating
Mass CO2 = 2.500 - 2.016 = 0.484 grams
Step 4: Calculate the mole's CO2
Moles CO2 = Mass CO2 / molar mass CO2
Moles CO2 = 0.484 grams / 44.01 g/mol
Moles CO2 = 0.0109 moles
Step 5: Calculate moles CaCO3
For 1 mol CaO we need 1 mol CO2 for 1 mol CaCO3
For 0.0109 mol CO2, we have 0.0109 mol CaCO3
Step 6: Calculate the mass of CaCO3
Mass CaCO3 = moles CaCO3 * molar mass CaCO3
Mass CaCO3 = 0.0109 moles * 100.08 g/mol
Mass CaCO3= 1.10 grams
Step 7: Calculate the mass per cent of CaCO3
Mass % CaCO3 = (
There is 53.8 % of CaCO3 in the mixture 1.10 grams / 2.750 grams )*100 %
Mass % CaCO3 = 44 %
The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilograms of carbon 12.
Learn more about mole here:
https://brainly.com/question/20486415
#SPJ4
Use the table of observed changes to answer the question. Change # Reacts with another substance? Temperature change? Gas, sound, or light produced? New substance formed? 1 yes yes yes yes 2 no yes yes no 3 yes yes yes yes 4 no no no no Which changes shown in the table are physical changes? (1 point) 1 and 4 1 and 4 2 and 3 2 and 3 1 and 2 1 and 2 2 and 4 2 and 4
Option 4- no, no, no, no. (for physical change.)
Chemical Change -A chemical change is the conversion of one substance into another, the development of new chemicals with unique features, or any combination of these.
There are five (simple) methods for identifying a reaction:
1. change of color
2. Gas formation
3. pH change
4. Temperature change
5. Precipitate formation
Physical change - A physical change happens when a substance's physical characteristics change without undergoing chemical composition. Common physical changes include melting, adjustments to size, volume, color, density, and crystal structure.
Therefore, according to the question physical changes are-
1. Reacts with another substance- no
2. Temperature change - no
3. Gas, sound, or light produced - no
4. New substance formed - no
To learn more about Physical change refer - https://brainly.com/question/14444325
#SPJ9
PLEASE HELP!! I need to know the answer to this but I'm overly exhausted and the question isn't making and sense...
An unknown element has three naturally occurring isotopes.
Below are their masses (amu) and % abundance
A) Calculate the weighted atomic mass unit for each isotope. Show % conversions and record the AMU for each isotope in the table below
B) What is the average (Total) atomic mass unit of the unknown element.
C) Identify this unknown element from the Periodic Table
An unknown element has three naturally occurring isotopes total average atomic mass 20.18 amu and element from the periodic table is neon
Isotopes are the members of a family of an element that all have the same number of protons but different numbers of neutrons
There are three neon isotopes and the more abundant ²⁰Ne and ²¹Ne are both essentially all primordial, as there is no significant global production of these isotopes and also ²²N
Neon 20 is made up of ten proton and ten neutron the atomic mass unit of the gas is 19.992 and the abundance of the gas is 90.48% and neon 21 is made up of ten proton and eleven neutron and the atomic mass unit of the gas is 20.994 and the abundance is 0.27% and neon 22 is made up of ten proton and twelve neutron and the atomic mass unit of the gas is 21.991 and the abundance of gas is 9.25%
Unknown element from the periodic table is neon
Know more about isotopes
https://brainly.com/question/13658643
#SPJ1
Which model of the atom has electrons traveling in specific paths around the nucleus?
A. Thomson’s model
B. Rutherford’s model
C. Bohr’s model
D. Dalton’s model
Answer:
C
Explanation:
this is because the rest talk about the findings of protons,neutrons and electrons.
for the measurements 0.123 m, which digits is the estimated digit?
Answer:
aaaaaaaaaaaaa
Explanation:
aaaaaaaaaaaaaaaa
2. in nature the element neon exists as three different isotopes, ne-20, ne-21, and ne-22. which neon isotope predominates? explain your choice.
The three isotopes of Neon, Ne-20, Ne-21, and Ne-22 are said to have an atomic number. Neon - 20 with a mass of 19.99 amu predominate all other isotopes.
What are isotopes?Isotopes as been defined as atoms of the same element with different atomic masses but the same atomic number as the number of neutrons differs in the atoms. The neon element has three isotopes, Ne-20, Ne-21, and Ne-22.
Ne - 20 is the most predominant isotope of the Neon element as it most abundant and stable isotope with an abundance of 90.48% followed by Ne-22 (9.25%), and Ne-21 (0.27%).
Therefore, Ne-20 is a predominant isotope of Neon.
Learn more about isotopes, here:
https://brainly.com/question/27475737
#SPJ4
Transferring small quantities of liquid solutions from one container into another
Using Pasteur Pipettes (or pipets) are the most commonly used tool for transferring small volumes of liquids (< 5mL) from one container to another.
What is Pasteur Pipettes?A pipette, also called pipett, is a lab instrument frequently used in the fields of chemistry, biology, and medicine to transfer a predetermined volume of liquid, frequently as a media dispenser. Pipettes are available in a variety of styles with varying degrees of accuracy and precision, ranging from simple single-piece glass pipettes to more intricate adjustable or electronic pipettes. In order to draw liquid up and out of a pipette, a partial vacuum is often created above the liquid-holding chamber and then selectively released. Depending on the instrument, measurement accuracy varies substantially.
Although each form of pipette has particular descriptive titles, in practice any sort of pipette will only be referred to as a "pipette," and the required device will be clear from the context. Occasionally, pipettes that dispense.
To learn more about Pasteur Pipettes from the given link:
https://brainly.com/question/28317009
#SPJ4
Which example shows an organism that cannot reach homeostasis through internal changes?
Responses
A lizard is cold, and it moves to a sunny rock to warm up.
A dog shivers when it is too cold.
Circulation decreases in a bird when it becomes too warm.
.
A person gets a fever in response to a flu infection.
a solution contains 0.0440 m ca2+ and 0.0930 m ag+. if solid na3po4 is added to this mixture, which of the phosphate species would precipitate out of solution first? ca3(po4)2 ag3po4 na3po4 when the second cation just starts to precipitate, what percentage of the first cation remains in solution?
The percentage of the first cation that remained in the solution when the second cation starts to precipitate is 12.86%.
[tex]Ca ^{ + } in \: the \: solution \: = 0.0440[/tex]
[tex]Ag ^{ + } \: in \: the \: solution = 0.0940[/tex]
The balanced reaction for the equation is,
[tex]Ag_{3} PO _{4} →3Ag ^{3 + } + \: PO ^{3 - } _{4}[/tex]
[tex]Solubility \: product \: constant \: of[/tex]
[tex]Ag_{3} PO _{4} = 8.89 \times 10 ^{ - 17} [/tex]
[tex]k _{s} =[Ag ^{ + } ]^{3} \: [PO _{4} ^{3 - } ] [/tex]
[tex]8.89 \times 10 ^{ - 7} = (0.940) ^{3} \: [PO _{4} ^{3 - } ] [/tex]
[tex] \frac{8.89 \times 10 ^{ - 7}} { (0.940) ^{3}} = \: [PO _{4} ^{3 - } ] [/tex]
[tex] [PO _{4} ^{3 - } ] = 1.07 \times 10 ^{ - 13} [/tex]
The balanced equation for the reaction is,
[tex]Ca_{3} (PO _{4}) _{2}→3Ca ^{2 + } + 2PO _{4} ^{3 - } [/tex]
[tex]The \: solubility \: product \: constant \: of [/tex]
[tex]Ca_{3} (PO _{4}) _{2} = 2.07 \times 10 ^{ -32} [/tex]
[tex]k _{s} = [Ca ^{ 2 + } ] ^{ 3} \: (PO _{4}) _{2}[/tex]
[tex]2.07 \times 10 ^{ - 33} = (0.0440)^{3} \: (PO _{4} ^{3 - } )^{2} [/tex]
[tex] [PO _{4} ^{3 - } ] = \frac{2.07 \times 10 ^{ - 33} }{(0.0440)^{3} }[/tex]
[tex](PO _{4} ^{3 - }) = 4.93 \times 10 ^{ - 15} [/tex]
[tex]Ca_{3} (PO _{4}) _{2} \: will \: precipitate \: first.[/tex]
[tex]Concentration \: of \: Ca ^{ + 2} \: when \:[/tex]
the second cation starts to precipitate.
[tex]k _{s} = [Ca ^{ + 2} ] ^{ 3} \: (PO _{4} ^{3 - } ) ^{2} [/tex]
[tex]2.07 \times 10 ^{ - 33} = [Ca ^{ + 2}] ^{3} \: \times 10 ^{ - 33} [1.07 \times 10 ^{ - 13} ] ^{2} [/tex]
[tex] [Ca ^{ + 2}] = 0.00566[/tex]
The percentage of the first cation that remained in the solution when the second cation starts to precipitate is,
[tex]percentage \: \: of \: remaining \: Ca ^{ + 2} = \frac{concentration \: remaining}{initial \: concentration } [/tex]
[tex] = \frac{0.00566}{0.044} \times 100[/tex]
= 12.86 %
Therefore, the percentage of the first cation that remained in the solution when the second cation starts to precipitate is 12.86%.
To know more about precipitation, refer to the below link:
https://brainly.com/question/20925010
#SPJ4
Calcium carbonate decomposes into calcium oxide and carbon dioxide. If 224 g of calcium carbonate decomposes, how many moles of carbon dioxide gas is produced?.
When 224 g of calcium carbonate(CaCO3) decomposes , 2.24 moles of carbon dioxide is produced.
When calcium carbonate decomposes in the presence of heat, it produces calcium oxide and carbon dioxide. This reaction is represented by the following equation:
CaCO3 ⇒ CaO + CO2
It is clear from the above equation that,
1 mole of CaCO3 produces 1 mole of CO2
Or 100 g of CaCO3 produces 1 mole of CO2
Thus, 224 g of CaCO3 produces 1/100 x 224 = 2.24 moles of CO2
Therefore, if 224 g of calcium carbonate(CaCO3) decomposes, 2.24 moles of carbon dioxide is produced.
To know more about "calcium carbonate", refer to the link given below:
https://brainly.com/question/8764175?referrer=searchResults
#SPJ4
Ions form the _____ number of an atom is changed
A proton
B neutron
C electron
D atomic number
Ions form the proton number of an atom is changed. The correct option is A.
Thus, An atom will be neutrally charged if its protons and electrons are equal in number. An ion is created when an atom's protons and electrons are different numbers.
It is technically possible to make an ion if the number of protons varies but the number of electrons stays the same. The identity of the atom is determined by the amount of protons, not by the atom itself, which will change.
An isotope would be produced if the neutron count varied. An ion will also form if the number of electrons changes because this will cause a change in charge.
Thus, Ions form the proton number of an atom is changed. The correct option is A.
Learn more about Protons, refer to the link:
https://brainly.com/question/12535409
#SPJ7
An object displaces 15.9ml when it is submerged in water. What is the volume of the object in liters?
Answer:
0.0159 Liters
Explanation:
15.9 ÷ 1E3 aka 1000 = 0.0159 liters
milli means 1000 of something
What is Electron gain Enthalpy?
Answer:
Electron gain enthalpy is defined as the amount of energy released when an electron is added to an isolated gaseous atom.
An electrically neutral atom of beryllium has four protons. Which statement is true? There are four protons in the nucleus. There is a charge of −4 on an atom of beryllium. There are four neutrons in the nucleus. There is a charge of +4 on an atom of beryllium.
Answer:
there are four protons in the nucleus