Assuming that the slug's body is 3% salt, what is the most likely prediction that would result from placing the slug into a 6% salt solution?

Answers

Answer 1

Answer: As i know, please see the Explanation

Explanation:The cell contains 3% salt, so we can safely assume that it contains 100%−3%=97% water.


Related Questions

Calculate the magnitude of the electric field at one corner of a square 2.42 m on a side if the other three corners are occupied by 2.75×10−6 C charges.

Answers

Answer:

loloeuhsh

Explanation:

shwvwgnwajejjeisus

PLEASE HELP ASAP!
A machine has an efficiency of 70%. What happens to the other 30% of the work?

Answers

Answer:

The other 30% is lost from friction.

Explanation:

       friction 30% ---> |O| <------ 70% work

A machine has an efficiency of 70%, and the remaining 30% of the input work is lost as waste energy or dissipated in the form of heat, noise, or vibration, which cannot be harnessed to do any useful work.

What is work done by machine?

In any machine, the total work input is equal to the total work output plus any work that is lost or dissipated due to various factors such as friction, heat transfer, etc., so, for example, if a machine receives 100 units of energy as input, only 70 units of energy are converted into useful output work, and the remaining 30 units of energy are lost as waste energy.

Hence, the remaining 30% of the input work is lost as waste energy or dissipated in the form of heat, noise, or vibration, which cannot be harnessed to do any useful work.

Learn more about the work by machine here.

https://brainly.com/question/15365822

#SPJ6

Piano tuners tune pianos by listening to the beats between the harmonics of two different strings. When properly tuned, the note A should have the frequency 440 Hz and the note E should be at 659 Hz. The tuner can determine this by listening to the beats between the third harmonic of the A and the second harmonic of the E. A tuner first tunes the A string very precisely by matching it to a 440 Hz tuning fork. She then strikes the A and E strings simultaneously and listens for beats between the harmonics. What beat frequency indicates that the E string is properly tuned

Answers

Answer:

The beat frequency = 2.0 Hz

Explanation:

From the given information

The 3rd harmonic frequency of the note is equivalent to thrice note A fundamental frequency.

i.e.

[tex]f_{3A} = 3f_A[/tex]

where;

[tex]f_A =[/tex] note A fundamental freq.

replacing 440 Hz for [tex]f_A[/tex]

[tex]f_{#a} = 3 (440 \ Hz)[/tex]

[tex]f_{3A} = 1320 Hz[/tex]

However, the 2nd harmonic of the E is equivalent to two times the fundamental frequency of the note E.

i.e.

[tex]f_{2E} = 2f_E[/tex]

[tex]f_E =[/tex]  note E fundamental freq.

replacing 659 Hz for [tex]f_E[/tex]

[tex]f_{2E} = 2(659)[/tex]

[tex]f_{2E} = 1318 \ Hz[/tex]

Finally, the beat frequency when the E string is properly tuned is:

[tex]\Delta f = f_{3A}-f_{2E}[/tex]

[tex]\Delta f = 1320 \ Hz - 1318 \ Hz[/tex]

[tex]\Delta f = 2.0 \ Hz[/tex]

Thus, the beat frequency = 2.0 Hz

Ms. Senko is moving a desk around her classroom, the desk weighs 125N.
The Coefficient of Static Friction between the desk legs and the floor is
0.35. The Coefficient of Kinetic Friction between the desk legs and the
floor is 0.23 WHAT IS THE FORCE OF FRICTION ON THE table as it is moving

Answers

Answer:

Static force of friction = 428.75 N

Kinetic Force of Friction = 281.75 N

Explanation:

The static force of friction is equal to Coefficient of static Friction * Mass * g

= 0.35 *125 * 9.8

= 428.75 N

The Kinetic force of friction is equal to Coefficient of kinetic Friction * Mass * g

= 0.23 *125 * 9.8

= 281.75 N

the melting point and boiling point of Ice are respectively
a. 273k,373k. b. 373k,273k c.0k,100k d.100k,0k​

Answers

a. 273k,373k

This is the answer.

A 6.25 g quarter sits 25 cm from the axis of rotation on a turntable that has a period of rotation of 1.8 seconds.
What must the coefficient of static friction be in order to keep the quarter from sliding outward when the
turntable is in motion?

Answers

The coefficient of static friction be in order to keep the quarter from sliding outward when the turntable is in motion will be 0.31.

What is the friction force?

It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).

Mathematically it is defined as the product of the coefficient of friction and normal reaction.

On resolving the given force and acceleration in the different components and balancing the equation gets. The friction force balances centripetal force.

The given data in the problem will be;

m is the mass =6.25 g

r is the radius =25 cm=0.25 m

t is the time = 0.18 sec

μ is the coefficient of static friction =?

[tex]\rm F_c= mw^2r \\\\ f= \mu mg \\\\ F_C=f\\\\ mw^2r= \mu mg \\\\ \rm \mu = \frac{\omega^2r}{g} \\\\ \rm \mu = (\frac{2\pi}{1.8} )^2\frac{0.25}{9.81} \\\\ \rm \mu = 0.31[/tex]

Hence the coefficient of static friction will be 0.31.

To know more about friction force refer to the link;

https://brainly.com/question/1714663

The Mississippi River is continually forming and changing the land mass in the southern part of Louisiana. This kind of build up of land is called a

Answers

Answer:

dfdfsdf s

Explanation:

fsdfsd fsd fds f vsdvads

A marble is placed at the bottom of a semi-spherical bowl, as shown in the figure. The marble is then displaced from the bottom of the bowl to a position about halfway from the top of the bowl. The marble is then released from rest such that the marble always remains in contact with the bowl. Students observe that the marble rolls back and forth as it oscillates about the bottom of the bowl. Which of the following statements best explains why the marble undergoes oscillatory motion?
a)The sides of the bowl become steeper at positions farther from the bottom of the bowl.b) The net force exerted on the marble always has a component directed toward the bottom of the bowl. c) The normal force exerted on the marble decreases with increasing distance from the bottom of the bowl. D ) The gravitational force exerted on the marble is constant in magnitude and direction.​

Answers

Answer:

It is D

Explanation:

The explanation why the marble undergoes oscillatory motion should be option D.

What is oscillatory motion?

An object should be classified as the motion oscillates related to an equilibrium position because of the restoring force or torque.  This motion should be significant to study various phenomena like electromagnetic waves, molecules. etc. In the case when the gravitational force should be exerted on the marble here the magnitude and the direction should be the same.

learn more about the motion here: https://brainly.com/question/16335988

A racing car on a straight accelerates from 100mph to 316 mph in three seconds what is the acceleration?

Answers

Answer:

72mph/sec

Explanation:

The car goes from 100mph to 316mph in three seconds. Meaning it increases its speed by (316 - 100)mph in three seconds. That is 216 mph increase in three seconds. So, we divide the speed increase by the amount of time the increase occurred over. We get:

216mph / 3sec = 72mph/sec, our final answer

Hope it made sense. I would appreciate Brainliest, but no worries.

Calories are a unit of energy that are reserved for heat energy but can be
directly converted to and from mechanical units of energy (Joules). How
many calories of energy are there in 500 Joules of energy?

Answers

Use photo to see the solve of your problem

A hunter on a frozen, essentially frictionless pond uses a rifle that shoots 4.20 gg bullets at 970 m/sm/s. The mass of the hunter (including his gun) is 69.5 kgkg, and the hunter holds tight to the gun after firing it. You may want to review (Page) . For related problemsolving tips and strategies, you may want to view a Video Tutor Solution of Collision along a straight line. Part A Find the recoil speed of the hunter if he fires the rifle horizontally.

Answers

Answer:

[tex]0.059\ \text{m/s}[/tex]

Explanation:

[tex]m_1[/tex] = Mass of bullet = 4.2 g

[tex]u_1[/tex] = Initial velocity of bullet = 0

[tex]m_2[/tex] = Mass of hunter with rifle = 69.5 kg

[tex]u_2[/tex] = Initial velocity of hunter with rifle

[tex]v_1[/tex] = Final velocity of the bullet = 970 m/s

[tex]v_2[/tex] = Final velocity of the hunter with the rifle

As the momentum of the system is conserved we have

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow v_2=\dfrac{m_1u_1+m_2u_2-m_1v_1}{m_2}\\\Rightarrow v_2=\dfrac{0-0-0.0042\times 970}{69.5}\\\Rightarrow v_2=-0.059\ \text{m/s}[/tex]

The recoil speed of the hunter is [tex]0.059\ \text{m/s}[/tex] in the opposite direction of the bullet.

A baby was born on his due date, but doctors determined that a valve in his heart was too short to adequately pump blood to his body. The baby passed away after eight months. Which best describes the cause of his death?
He had a congenital condition.
He was premature.
He died in an accident.
He suffered SIDS.

Answers

Answer:

He had a cogenital condition

Explanation:

cogenital conditions are present before or at the time of birth and are considered birth defects

Answer:

The answer is C- He had a congential condition.

Explanation:

Edge

13
Which of the following properties makes a light wave different from all mechanical waves?
A A light wave slows down in a vacuum.
B A light wave is able to transmit energy.
A light wave exists as a transverse wave.
D A light wave can travel without a medium.

Answers

Answer:

D. A light wave can travel without a medium.

Explanation:

Light wave can be defined as an electromagnetic wave that do not require a medium of propagation for it to travel through a vacuum of space where no particles exist.

On the other hand, mechanical waves such as sound are highly dependent on matter for their propagation and transmission.

This ultimately implies that, the properties which makes a light wave different from all mechanical waves is that, a light wave can travel without a medium of propagation.

An 85-year-old woman who was having trouble breathing checked into the hospital. There, her heart stopped beating and doctors determined she suffered heart failure. After being resuscitated, she was in a coma and had no brain function. Her family then made the difficult decision to take her off life support, and the woman passed away.

Which order of events did the woman experience?
brain death Right arrow. clinical death Right arrow. somatic death
somatic death Right arrow. brain death Right arrow. clinical death
clinical death Right arrow. brain death Right arrow. somatic death
clinical death Right arrow. somatic death Right arrow. brain death

Answers

Answer:c

Explanation:

clinical death Right arrow. brain death Right arrow. somatic death this order of events did the woman experience. Hence option C is correct.

What is death ?

The permanent end of all biological activities that support an organism is defined as death. Death may also be defined as the permanent cessation of functioning of the entire brain, including the brainstem, in creatures with a brain, and brain death is frequently used as a legal definition of death.Normally, the remnants of a previous creature begin to degrade quickly after death. Death is an unavoidable process that happens in all species. Turritopsis dohrnii, for example, is physiologically immortal. They can, however, perish from causes other than ageing.

It has been difficult to determine when someone has died. Initially, death was defined as the cessation of breathing and heartbeat.

To know more about Death :

https://brainly.com/question/31108171

#SPJ3.

Right an essay about 250-200 words about water

Answers

Answer:250-200l Water

Explanation:

The 180-mm disk is at rest when it is placed in contact with a belt moving at a constant speed. Neglecting the weight of the link AB and knowing that the coefficient of kinetic friction between the disk and the belt is 0.54, determine the angular acceleration of the disk while slipping occurs.

Answers

Answer:

[tex]\mathbf{\alpha = 25.88 \ rad/s^2 }[/tex]

Explanation:

Consider the force due to friction:

[tex]F = \mu_kN -------- (1)[/tex]

where;

N = normal reaction

[tex]\mu_k[/tex] = coefficient of kinetic friction.

Via the horizontal direction, the forces of equilibrium are:

[tex]\sum F_x = \sum(F_x) _{eff} \\ \\ N- F_{AB} \ cos \theta = 0 \\ \\ F_{AB} \ cos \theta = N ------ (2)[/tex]

where;

[tex]\theta[/tex] = angle of AB is associated with the horizontal;

[tex]F_{AB}[/tex] = force exerted by AB

Let's take a look at the equilibrium of forces along the vertical direction.

[tex]\sum F_y = \sum (F_y)_{eff} \\ \\ F+F_{AB} sin \theta - W = 0\\ \\ \mu_k N + F_{AB} sin \theta -mg =0 \\ \\ F_{AB} sin \theta = mg - \mu_kN-------(3)[/tex]

By dividing (3) by (2), we get:

[tex]\dfrac{F_{AB} sin \theta }{F_{AB} cos \theta} = \dfrac{mg - \mu_k N}{N} \\ \\ tan \theta = \dfrac{mg-\mu_kN}{N} \\ \\ Ntan \theta = mg - \mu_kN \\ \\ N(tan \theta + \mu_k ) = mg \\ \\ N = \dfrac{mg}{tan \theta + \mu_k}[/tex]

By replacing the obtained value of N into:

[tex]F = \mu_k N[/tex]

we have:

[tex]F = \mu_k (\dfrac{mg}{tan \theta + \mu_k}) \\ \\ \\ F = \dfrac{mg \mu_k}{tan \theta + \mu_k}[/tex]

Moment about center A can be expressed as:

[tex]\sum M_A = \sum (M_A) _{eff} \\ \\ Fr = I \alpha\\ \\ \alpha = \dfrac{Fr}{I}[/tex]

where;

[tex]\alpha[/tex] = angular acceleration of the disc

I = mass moment of inertia

r = radius of disc

By replacing F and I; ∝ becomes:

[tex]\alpha = \dfrac{\bigg( \dfrac{mg \mu_k}{tan \theta + \mu_k} \bigg) r}{\dfrac{1}{2}mr^2}[/tex]

[tex]\alpha = \dfrac{2g}{r} \dfrac{\mu_k}{tan \ \theta + \mu_k}------- (4)[/tex]

where;

g = 9.8 m/s²

r = 0.18 m

[tex]\mu_k = 0.54[/tex]

θ = 60°

[tex]\alpha = \dfrac{2(9.8)}{0.18} (\dfrac{0.54}{tan \ 60+ 0.54})[/tex]

[tex]\mathbf{\alpha = 25.88 \ rad/s^2 }[/tex]

What will the answers for a ,b and c be

Answers

Answer:

A. 1.6 Hz

B. 1000 m/s²

C. 50000 N

Explanation:

A. Determination of the frequency.

Period (T) = 0.625 s

Frequency (f) =?

f = 1/T

f = 1/0.625

f = 1.6 Hz

B. Determination of the acceleration.

Radius (r) = 10 m

Velocity (v) = 100 m/s

Acceleration (a) =?

a = v²/r

a = 100² / 10

a = 10000 / 10

a = 1000 m/s²

C. Determination of the net force.

Mass (m) = 50 Kg

Acceleration (a) = 1000 m/s²

Net force (F) =?

F = ma

F = 50 × 1000

F = 50000 N

A boy held a ball in the air what force is he applying?

Answers

Answer:

strength

Explanation:

Answer:

Potential energy

Explanation:

Since the boy is holding is, it is not moving. So, it has potential energy. Also, since it is in the air, it has gravitational potential energy.

two automobiles a and b are travelling in the same direction in adjacent lanes are stopped at a traffic signal. as the signal turns green, automobile a accelerates at a constant rate of 2 m/s2. two seconds later, automobile b starts and accelerates at a constant rate of 3.6 m/s2. determine (a) when b will overtake a, (b) the speed of each automobile at that time, and c) the location where b overtakes a relative to the traffic signal. -truck

Answers

Answer:

a.5.85 s b i. 15.7 m/s ii. 21.1m/s c. 61.62 m

Explanation:

(a) when b will overtake a,

Using s = ut + 1/2at² we express the distance moved by each automobile.

Since both automobiles start at rest, their initial speed, u = 0 m/s, a = acceleration of automobile and t = time of travel or overtaking

So s = 0 × t + 1/2at²

s = 0 + 1/2at²

s = 1/2at²

Let time, t be the time the automobile b start, and its acceleration a = 3.6 m/s²

So, s = 1/2 × 3.6 m/s² × t² = 1.8t²

Since automobile a starts 2 seconds earlier, its time of travel is (t + 2) s. Since its acceleration, a = 2 m/s²,

s = 1/2 × 2 m/s² × (t + 2)²

s = (t + 2)²

Since both distances are equal at overtaking

(t + 2)² = 1.8t²

t² + 4t + 4 = 1.8t²

1.8t²- t² - 4t - 4 = 0

0.8t² - 4t - 4 = 0

dividing through by 0.8, we have

0.8t²/0.8 - 4t/0.8 - 4/0.8 = 0

t² - 5t - 5 = 0

Using the quadratic formula to find t,

[tex]t = \frac{-(-5) +/-\sqrt{(-5)^{2} - 4 X 1 X (-5)} )}{2 X 1} \\t = \frac{5 +/-\sqrt{25 + 20} )}{2} \\t = \frac{5 +/-\sqrt{45} )}{2} \\t = \frac{5 +\sqrt{45} )}{2} or \frac{5 -\sqrt{45} )}{2}\\t = \frac{5 + 6.708 )}{2} or \frac{5 - 6.708)}{2}\\t = \frac{11.708 )}{2} or \frac{-1.708}{2}\\t = 5.854 sor -0.854 s[/tex]

t ≅ 5.85 or -0.85

We take the positive answer since t cannot be negative.

So, t = 5.85 s

So, b will overtake a 5.85 s later.

(b) the speed of each automobile at that time,

Using v = u + at for each automobile, where u =initial speed of automobile = 0 m/s (since they both start from rest), a = acceleration of automobile and t = time of travel of automobile

i. Speed of automobile a

For automobile a, its time of travel is (t + 2) s = 5.85 s + 2 s = 7.85 s and its acceleration is 2 m/s²

So, v = u + at

= 0 m/s + 2 m/s² × 7.85 s

= 0 m/s + 15.7 m/s

= 15.7 m/s

ii. Speed of automobile b

For automobile a, its time of travel is t  s = 5.85 s and its acceleration is 3.6 m/s²

So, v = u + at

= 0 m/s + 3.6 m/s² × 5.85 s

= 0 m/s + 15.7 m/s

= 21.06 m/s

≅ 21.1 m/s

c) the location where b overtakes a relative to the traffic signal. -truck

The location where b overtakes a relative to the traffic signal is the distance each automobile moves before overtaking. In section (a), we foundthat distance s = 1/2at² = (t + 2)² = 1.8t²

Using s = (t + 2)²

= (5.85 + 2)²

= 7.85²

= 61.6225 m

≅ 61.62 m

what foxes need to eat to
stay alive​

Answers

Answer:

They eat meat and vegetation.

Answer:

Meat and vegetation...

In the nitrogen cycle, plants take in nitrates and convert them into

Answers

It is then converted into a ammonia.

A soft drink (mostly water) flows in a pipe at a beverage plant with a mass flow rate that would fill 220 0.355 - L cans per minute. At point 2 in the pipe, the gauge pressure is 152kPa and the cross-sectional area is 8.00cm2. At point 1, 1.35m above point 2, the cross-sectional area is 2.00cm2. Part A Find the mass flow rate. M

Answers

Answer:

[tex]1.302\ \text{kg/s}[/tex]

Explanation:

[tex]\rho[/tex] = Density of water = [tex]1\ \text{kg/L}[/tex]

[tex]dV[/tex] = Change in volume = [tex]220\times 0.355\ \text{L}[/tex]

[tex]dt[/tex] = Time elapsed = 1 minute = 60 seconds

Mass flow rate is given by

[tex]\dot{m}=\rho\dfrac{dV}{dt}\\ =1\times \dfrac{220\times 0.355}{60}\\ =1.302\ \text{kg/s}[/tex]

The mass flow rate is [tex]1.302\ \text{kg/s}[/tex].

h. Briefly describe the process taking place in the image below and comment on the
function of the molecule at stage 1 and 3
(6)
pat​

Answers

AHEMHFgjrhfrshfghesgrgregr

How can we calculate gravitational acceleration?

Answers

The mathematical formula for gravitational force is F=GMmr2 F = G Mm r 2 where G is the gravitational constant.

A ladder 5.0 m long leans against a wall inside a spaceship. From the point of view of a person on the ship, the base of the ladder is 3.0 m from the wall, and the top of the ladder is 4.0 m above the floor. The spaceship moves past the Earth with a speed of 0.90c in a direction parallel to the floor of the ship. Find the angle the ladder makes with the floor as seen by an observer on Earth

Answers

Answer:

the angle the ladder makes with the floor as seen by an observer on Earth is 71.9°

Explanation:

Given the data in the question and as illustrated in the diagram below.

speed of the ship v = 0.90c

base of the ladder from the wall x₀ = 3.0 m

top of the later above the floor y = 4.0 m

we determine angle θ.

from the diagram,

tanθ = y/x₀

tanθ = y / x₀√( 1 - v²/c² )

we substitute

tanθ = 4.0 / 3.0√( 1 - ((0.9c)²/c²) )

tanθ = 4.0 / 3.0√( 1 - ((0.9²)c²/c²) )

tanθ = 4.0 / 3.0√( 1 - (0.9²) )

tanθ = 4.0 / 3.0√( 1 - 0.81 )

tanθ = 4.0 / 3.0√0.19

tanθ = 4.0 / 1.30766968

tanθ = 3.058876

θ = tan⁻¹( 3.058876 )

θ = 71.8965 ≈ 71.9°

Therefore, the angle the ladder makes with the floor as seen by an observer on Earth is 71.9°

Please Help!!!

For A&B

Answers

Answer:

A. 40N

B. 5m/s

Explanation:

A.

Impulse is equal to the area under the curve of a force vs. time graph. In this case, the area is in the shape of a triangle with base 8 (12-4=8) and perpendicular height 10:

Area of a triangle = (1/2)bh

A=(1/2)*8*10

=40

ANSWER: 40N

B.

Impulse = mass * velocity

40 = 8v

v = 5

ANSWER: 5m/s

Diana has just been diagnosed with "pre-diabetes," and her doctor has instructed her to watch her intake of sugar. This is easy at home, but this weekend she will be going to a restaurant with her family. What should she do? (1 point) Order anything on the menu labeled "sugar-free" or "fat-free." Use a phone app to check the sugar content in items or ingredients on the menu. Order something off the salad options and skip the soda or dessert. Split an entrée with a friend to reduce her calorie intake at the meal.

Answers

Answer:

sugar free

Explanation:

she should most likely take anything sugar free and avoid any bread, bread can increase your blood level as well, my mother had pre diabetes and what she did was eat salads and drink vegetable smoothies until your sugar goes down. splitting an entrée won't do anything, you technically get the same amount of sugar so at the point just eat the whole meal.

Question 1 of 10 Which characteristic of nuclear fission makes it hazardous?
O A. The process destroys every atomic nucleus that goes through it.
O B. The process changes existing atoms into atoms of different elements
C. The process requires very high pressures.
O D. The radioactive wastes it produces can spread to any part of the environment

Answers

Answer:

D.

The radioactive wastes it produces can spread to any part of the environment.

Explanation:

Fission is the name given to the splitting of a heavy nucleus into two medium-mass nuclei. Fission is said to be induced if it results from the absorption of a neutron to form an unstable nucleus that decays by fission. The induced fission usually produces further neutrons accompanying the fission fragments.

Answer:  D. The radioactive wastes it produces can spread to any part of the environment

Explanation:

Assertion: In electrical circuits the connecting wires are usually made of thick copper wires. Reason: Thicker wires offer higher resistance and the wires are made of copper as the electrical conductivity of copper is low

a)Both A and R are true and R is the correct explanation of A.b)Both A and R are true, and R is not the correct explanation of A.c)A is true, but R is false. d)A is false, but R is true. e)Both A and R are false.

Answers

There actually three assertions here: one in A and two more in B.

All three assertions, as well as the reasoning described in this mess, are all False.

The correct choice from the list is e), but that doesn't even describe the complete Falseness of this disaster.

An 8.20 kg object is pulled along a horizontal surface by a force of 22.0 N. If its acceleration is 1.1 m/s2, what is the coefficient of friction between the two surfaces?

Answers

Answer:

0.5

Explanation:

In this picture,

Other Questions
Find NK.............. : If staff salaries were $32,000/month last year and $47,000/month this year, what is the total yearly labor cost increase? Please help if you know the answer please 6. Thirty random college students are asked if they study during the week. Since 60% said yes, a statement can be made that 40% of students only study on the weekend. the typical level of a low tide at a beach is the 0 point on a number line Select the indirect object pronoun that best completes this paragraph.Yo necesito unos huevos para preparar el pastel. Puedescuatro huevos del refrigerador?o pasarlespasarnospasarmepasarle Umm ... NO FILES/LINKS !!! A mans basic wage for a 40 hour week is 160 . He is paid 5 per hour for overtime .If he fors for 6.5 hours overtime in a certain week , his wages for that week is Which algebraic expression is equivalent to the expression below?A.24x +30B.6x- 1C.6x-9D.24x -30 6(4x - 5) describe what happens when atoms release light? How can the application of insecticides and herbicides affect an individuals health? a. Insecticides and herbicides can potentially contaminate foods. b. Insecticides and herbicides increase the disease rate of agricultural plants. c. The application of herbicides and pesticides reduces the vitamin content of crops. d. Herbicides and insecticides increase the health value of crops by adding necessary nutrients. What is the job or function of cell walls in plant cellls what is the effect of Laceration what two types of energy does a rock have as it rolls down a hill CAN SOMEONE HELP ON THESE QUESTIONS PLEASE!!!! 5 cm2 cm1 cmWhat is the answer help ASAP I need helpppp plssss anyone Im not the best at math :/ State Whether the following Statements are Verdadero or Falso. If the statement is false, correct it.1. All direct and indirect pronouns are the same.2. Direct object pronouns answer the questions "who" or "what."3. Direct object pronouns only replace people and subject pronouns.4. There are four options to direct object pronoun placement.5. There is no direct object pronoun option for "it."6. You can use lo to replace any object.7. Transitive verbs are verbs that take an indirect object.8. All verbs that are transitive are exclusively transitive.9. La, los, and las are both direct object pronouns and articles.10. When there are both direct and indirect object pronouns in a sentence, the direct object pronouncomes first. please please my dyslexia is a pain. What are examples of eye surgeries? Check all that apply.phacoemulsificationcorneal transplantLasikcochlear implantotoplastytympanoplasty