Calculate the molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water

The remaining radioactivity after one day will be 0.0063% of the original radioactivity. This is because the half-life of a radioactive material is the amount of time it takes for half of the original radioactivity to decay. So, after one day, the original radioactivity will have decayed to 0.0063%.

The process through which an unstable atomic nucleus loses energy through radiation is known as radioactive decay, also known as nuclear decay, radioactivity, radioactive disintegration, or nuclear disintegration. A substance that has unstable nuclei is regarded as radioactive. Alpha decay, beta decay, and gamma decay are three of the most frequent kinds of decay, and they all entail the emission of one or more particles. Beta decay is a result of the weak force, while the nuclear force and electromagnetism are in charge of the other two mechanisms.  Electron capture, which occurs when an unstable nucleus seizes an inner electron from one of the electron shells, is the fourth prevalent kind of decay. A series of electrons drop as a result of that electron being lost from the shell.

At the level of individual atoms, radioactive decay is a stochastic (i.e. random) process. No matter how long an atom has existed, quantum theory says it is impossible to forecast when an atom will decay. Nonetheless, the overall decay rate can be stated as a half-life or as a decay constant for a sizable number of similar atoms. There is a wide variation in the half-lives of radioactive atoms, from almost instantaneous to much longer than the age of the universe.

The remaining radioactivity after one day will be 0.0063% of the original radioactivity. This is because the half-life of a radioactive material is the amount of time it takes for half of the original radioactivity to decay.

1/2^(24/20) = 0.0063%.

Therefore, after one day, the original radioactivity will have decayed to 0.0063%.

For more such questions on radioactivity , Visit:

https://brainly.com/question/23959901

#SPJ11

Answer:

I needed points

Explanation:

i need them

If 0.0200 m fe3 is initially mixed with 1.00 m oxalate ion, then concentration of Fe3+ ion at equilibrium is 0 M.

The balanced chemical equation for the reaction of Fe3+ ion and oxalate ion is:

Fe3+ + 3C2O42- -> Fe(C2O4)33-

The reaction quotient, Qc, for the above reaction is given by the expression:

Qc = [Fe(C2O4)33-]/[Fe3+][C2O42-]

Here, the initial concentration of Fe3+ ion

= 0.0200 m

And, the initial concentration of oxalate ion is 1.00 m . According to the stoichiometry of the balanced equation, 1 mole of Fe3+ ion reacts with 3 moles of C2O42- ions to form 1 mole of Fe(C2O4)33- complex ion. Hence, the concentration of C2O42- ion that reacts with the given initial concentration of Fe3+ ion is given by the expression: [C2O42-] = 3[Fe3+] = 3 x 0.0200 m = 0.0600 m. After the reaction comes to equilibrium, let the concentration of Fe3+ ion be x M.Now, [Fe(C2O4)33-] = 0 M (as the entire Fe3+ ion is converted into Fe(C2O4)33- complex ion)Substituting the given and calculated values in the expression for Qc, we get:

Kc = [Fe(C2O4)33-]/[Fe3+][C2O42-]

=> 0/[x][0.0600]

=> 0x

=> 0 M

To learn more about Equilibrium :

https://brainly.com/question/19340344

#SPJ11

The mass number of an atom is determined by the total number of protons and neutrons in its nucleus.

The mass number is always a whole number because it is the sum of the number of protons and neutrons in the nucleus, and both of these particles have a mass of approximately 1 atomic mass unit (amu). Since the mass of an electron is much smaller compared to protons and neutrons, it is not included in the calculation of the mass number.

The isotope of carbon that has the same mass number and atomic mass is carbon-12. Its atomic mass is exactly 12 amu.

The approximate mass of one proton is 1 amu.

The approximate mass of one neutron is also 1 amu.

Answer: The theoretical yield of carbon dioxide formed is therefore 2.05 mol, or approximately 183.45 g.

The theoretical yield of carbon dioxide formed from the reaction of 2.6 g hexane and oxygen gas can be determined using the balanced equation for the reaction:

2 C6H14 + 19 O2 → 12 CO2 + 14 H2O

The amount of oxygen required for the reaction is given by:

(2.6 g hexane) × (1 mol hexane/86.18 g hexane) × (19 mol O2/1 mol hexane) = 3.29 mol O2

The theoretical yield of carbon dioxide formed can then be determined by multiplying the number of moles of oxygen by the molar ratio of carbon dioxide to oxygen:

(3.29 mol O2) × (12 mol CO2/19 mol O2) = 2.05 mol CO2

The theoretical yield of carbon dioxide formed is therefore 2.05 mol, or approximately 183.45 g.


Learn more about theoretical yield here:

https://brainly.com/question/14966377#

#SPJ11

In summary, a bond having "more ionic" or "more covalent" character refers to the degree to which the bond is either purely ionic or purely covalent, with most bonds falling somewhere in between.

When a bond has more ionic character, it means that the electrons are transferred more completely from one atom to another, resulting in larger differences in electronegativity and a greater degree of charge separation between the atoms. This typically occurs when there is a large difference in electronegativity between the atoms involved in the bond.

On the other hand, when a bond has more covalent character, it means that the electrons are shared more equally between the atoms, resulting in a smaller difference in electronegativity and less charge separation. This typically occurs when the atoms involved in the bond have similar electronegativities.

To know more about chemical bonds, visit:

https://brainly.com/question/12907148

#SPJ1

Answer:

8.35 atm.

Explanation:

The given reaction is:

2 CH4 → C2H4 + 2 H2

From the balanced equation, we can see that for every mole of C2H4 produced, 2 moles of H2 are produced.

First, we need to find the number of moles of C2H4 produced:

Molar mass of C2H4 = 2(12.01 g/mol) + 4(1.01 g/mol) = 28.05 g/mol

Number of moles of C2H4 = 11.6 g / 28.05 g/mol = 0.413 mol

Since 2 moles of H2 are produced for every mole of C2H4, the number of moles of H2 produced is:

0.413 mol C2H4 × 2 mol H2 / 1 mol C2H4 = 0.826 mol H2

Now we can use the ideal gas law to find the pressure of H2:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant (0.0821 L·atm/K·mol), and T is temperature in Kelvin.

We are given the volume (2.4 L) and temperature (300 K), and we just calculated the number of moles (0.826 mol). Plugging these values into the ideal gas law:

P × 2.4 L = 0.826 mol × 0.0821 L·atm/K·mol × 300 K

P = (0.826 mol × 0.0821 L·atm/K·mol × 300 K) / 2.4 L

P = 8.35 atm

Therefore, the pressure of hydrogen gas is 8.35 atm.

The orientation of the glycosidic bond affects the properties of the polysaccharides it creates by determining the geometry of the sugar units in the polymer chain. When the glycosidic bond is in the alpha configuration, the sugar ring has a twisted conformation, which results in the sugar units being oriented in a more linear fashion.

In contrast, when the glycosidic bond is in the beta configuration, the sugar ring has a more planar conformation, which results in the sugar units being oriented in a more zig-zag fashion.

This difference in orientation affects the overall structure of the polysaccharide. Polysaccharides with alpha glycosidic bonds tend to form helical structures, while polysaccharides with beta glycosidic bonds tend to form sheet-like structures. This is because the twisted conformation of the alpha sugar units allows for the formation of hydrogen bonds between adjacent sugar units, which leads to the formation of a helix.

In contrast, the more planar conformation of the beta sugar units does not allow for the formation of hydrogen bonds between adjacent sugar units, which leads to the formation of a sheet.

Additionally, the orientation of the glycosidic bond affects the solubility and digestibility of the polysaccharide. Polysaccharides with alpha glycosidic bonds tend to be more soluble and more easily digested than polysaccharides with beta glycosidic bonds.

This is because the helical structure of alpha-polysaccharides allows for more surface area to be exposed to water and digestive enzymes, while the sheet-like structure of beta-polysaccharides does not.

Learn more about polysaccharides here:
https://brainly.com/question/30529578#



#SPJ11

The correct answers are: A strong acid dissociates completely in solution to produce its conjugate. The conjugate of a strong acid is an anion. The conjugate of a strong acid is neutral in pH when in solution. The conjugate of a strong acid is basic in solution.

A strong acid is a compound that dissociates completely in a solution to produce H+ ions. An example of a strong acid is Hydrochloric acid (HCl) which dissociates completely in a solution to produce H+ ions and Cl- ions.

The conjugate base is an anion and it is formed when the acid donates a proton. It is neutral in pH when it is in a solution. For instance, HCl donates its proton to water to form H3O+ and Cl-. H2O is the base (conjugate) of H3O+ and Cl- is the base (conjugate) of HCl.

When the conjugate base of a strong acid is dissolved in water, it accepts a proton from water and increases the concentration of OH- ions in solution. Therefore, the conjugate base of a strong acid is basic in solution.

To know more about strong acid, refer here:

https://brainly.com/question/28858976#

#SPJ11

Answer:

0.972

Explanation:

The balanced chemical equation for the reaction is:

3 NaOH + H3PO4 → Na3PO4 + 3 H2O

From the equation, we can see that for every 1 mole of H3PO4 reacted, 3 moles of water are produced. Therefore, we need to first calculate how many moles of H3PO4 are present in 4.30 g of NaOH:

molar mass of NaOH = 23.0 g/mol + 16.0 g/mol + 1.0 g/mol = 40.0 g/mol

moles of NaOH = 4.30 g / 40.0 g/mol = 0.108 mol

According to the balanced equation, 3 moles of water are produced for every 1 mole of H3PO4. Therefore, we can calculate how many moles of water are formed as follows:

moles of H3PO4 = 3/1 * 0.108 mol = 0.324 mol

moles of water = 3/1 * 0.324 mol = 0.972 mol

Therefore, 0.972 moles of water are formed when reacting 4.30 g of sodium hydroxide with phosphoric acid.

Einstein's famous equation say that all matter is option B. concentrated energy that has condensed into the atoms.

When combined with the speed of light, Einstein's famous equation E=mc2 demonstrates mathematically that energy and matter are one and the same. m stands for mass, c for the speed of light, and E stands for energy. This equation states that all matter is simply concentrated energy that has condensed into atoms.

Einstein's famous equation is E=mc², which expresses the relationship between mass (m) and energy (E), and the constant speed of light (c) in a vacuum. This equation shows that mass and energy are interchangeable, and that a small amount of mass can be converted into a large amount of energy, as demonstrated in nuclear reactions.

Learn more about Einstein at:

https://brainly.com/question/26366397

#SPJ1

In order to ensure that 900 mL of 1/3 strength solution is delivered over 8 hours via a nasogastric tube, you must add 300 mL of water to the 1/3 strength solution.

This will give a total volume of 1.2 L, which when divided by 8 hours, equals 150 mL per hour.

Use the formula for calculating dilution, which is: Final Volume / Concentration = Amount of Solvent to be Added.

We are given the Final Volume, which is 900 mL, and the Concentration, which is 1/3 strength. We can calculate the Amount of Solvent (in this case, water) to be Added :

900 mL / (1/3) = 2700 mL

The amount of water needed to be added to the 1/3 strength solution to achieve 900 mL of 1/3 strength is 2700 mL.

However, since the total volume of the solution must not exceed 1.2 L, only 300 mL of water must be added to the 1/3 strength solution,

giving us a total volume of 1.2 L when the 900 mL of 1/3 strength is taken into consideration.

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

The empirical formula of the compound that produces 330 g of carbon, 69.5 g of hydrogen, and 440.4 g of oxygen upon decomposition is CHO2.

The empirical formula of a compound is the simplest whole-number ratio of atoms present in it. Follow the below steps to calculate the empirical formula of the given compound: Calculate the mass of each element present in the compound.

Calculate the mole of each element present in the compound by dividing its mass by its atomic mass. Determine the mole ratio by dividing each mole value by the smallest mole value obtained. Rearrange the ratio obtained in step 3 in the form of whole numbers. Moles of hydrogen/moles of oxygen = 69.5/27.5 = 2.53 ≈ 2.5Moles of oxygen/moles of oxygen = 27.5/27.5 = 1Therefore, the mole ratio of carbon: hydrogen: oxygen = 1: 2.5: 1Rearranging the above ratio to whole numbers, we get the mole ratio of carbon: hydrogen: oxygen as 2: 5: 2. The empirical formula of the compound is therefore CHO2.

Read more about Moles :

https://brainly.com/question/15356425

#SPJ11

Answer: If a plant produces 4.91 mol C6H12O6, then 6 x 4.91 = 29.46 moles of O2 are needed to produce 4.91 mol C6H12O6.

However, there is no given reaction, so it is not clear how O2 is involved. The balanced reaction equation for cellular respiration is:

C6H12O6 + 6O2 → 6CO2 + 6H2O + energy (ATP)

The ratio of CO2 to C6H12O6 is 6:1, which means 6 moles of CO2 is produced from every mole of C6H12O6 in the reaction. The ratio of O2 to C6H12O6 is 6:1 as well.


Learn more about moles here:

https://brainly.com/question/26416088#


#SPJ11

When a 25.7 mL sample of a 0.494 M aqueous hydrofluoric acid solution is titrated with a 0.424 M aqueous sodium hydroxide solution, the pH after 44.9 mL of sodium hydroxide have been added is 8.71.

When a 25.7 mL sample of a 0.494 M aqueous hydrofluoric acid solution is titrated with a 0.424 M aqueous sodium hydroxide solution, the pH after 44.9 mL of sodium hydroxide have been added can be calculated using the Henderson-Hasselbalch equation. This equation states that the pH of a solution is equal to the pKa (the acid dissociation constant) plus the logarithm of the base-to-acid ratio. The pKa of hydrofluoric acid is 3.2 and the base-to-acid ratio is the molarity of the sodium hydroxide (0.424 M) divided by the molarity of the hydrofluoric acid (0.494 M). This gives a ratio of 0.855 and a pH of 7.12.

To calculate the pH of the solution after 44.9 mL of sodium hydroxide have been added, the volume of hydrofluoric acid solution added must be taken into account. Since 25.7 mL of the hydrofluoric acid solution was initially present, an additional 19.2 mL of sodium hydroxide must be added. Using the Henderson-Hasselbalch equation, this gives a base-to-acid ratio of 1.608 and a pH of 8.71.

In summary, when a 25.7 mL sample of a 0.494 M aqueous hydrofluoric acid solution is titrated with a 0.424 M aqueous sodium hydroxide solution, the pH after 44.9 mL of sodium hydroxide have been added is 8.71. This is calculated using the Henderson-Hasselbalch equation and taking into account the additional volume of sodium hydroxide added.

To know more about pH click here:

https://brainly.com/question/16002621

#SPJ11

NaCl crystallizes in a cubic unit cell, meaning each side of the cell is equal in length. In this structure, each corner of the cell has a Cl- ion and each face of the cell has a Na+ ion, totaling 8 Cl- ions and 6 Na+ ions per unit cell. So, there are 8 Cl- ions and 6 Na+ ions in each unit cell of NaCl.

NaCl is an ionic compound, meaning it is composed of a metal cation (Na+) and a nonmetal anion (Cl-). Ionic compounds form when electrons are transferred from the metal to the nonmetal, creating a strong electrostatic attraction between the two ions. The oppositely charged ions are then arranged into a lattice structure with a repeating pattern of alternating cations and anions.

The unit cell of a NaCl crystal is a cube, meaning all the sides of the unit cell are of equal length. A single unit cell of NaCl contains eight Cl- ions at the corners and six Na+ ions at the faces of the cube. Since the unit cell of NaCl is symmetrical, the same arrangement of ions is repeated in each adjacent unit cell of the crystal. The arrangement of ions in a NaCl unit cell is important in understanding its properties. Because the cations and anions are arranged in an alternating pattern, the ions form a strong ionic bond. This bond gives the crystal its hardness and stability, making NaCl one of the most common and widely used compounds.

In summary, each unit cell of NaCl contains 8 Cl- ions at the corners and 6 Na+ ions at the faces, forming a cube of equal sides. The alternating arrangement of cations and anions creates an ionic bond which gives NaCl its hardness and stability.

Know more about unit cell   here:

https://brainly.com/question/29537966

#SPJ11

The most likely identity of the unknown gas that effuses taking 37s is Oxygen(O₂).

Since the unknown gas effuses out faster, it must be lighter than Xe.

The most likely identity of the unknown gas can be determined using Graham's Law of Diffusion. According to this, the time taken for effusion/diffusion of two different gases under identical conditions is directly proportional to the square roots of their densities or molecular masses. It is given as:

t₂/t₁ = √(M₂/M₁)

where t₂,t₁ are the times taken and M₂, M₁ are the molecular masses.

This ratio is determined by the ratio of the molecular weights of the unknown gas and the sample of Xe. The heavier the molecular weight, the slower the rate of effusion.

Rearranging and plugging in the values as t₂= 75s, t₁= 37s,  M₁= 131g (for Xe), we get M₂ as follows:

M₂= (37/75)² x 131 = 31.8 ≈ 32g

32g corresponds to the molecular weight of O₂ and it is lighter than Xe.

Therefore, the unknown gas that effuses out of the container faster than the sample of Xe, resulting in the unknown gas taking 37 seconds, and the sample of Xe taking 75 seconds is oxygen(O₂).

To know more about effusion, refer here:

https://brainly.com/question/2655041#

#SPJ11

Combustion has a constant enthalpy, Hc. The heat produced when 1 mol of a material burns fully in oxygen under typical conditions.

For more information on Hess' law kindly visit to

https://brainly.com/question/14561923

#SPJ1

Answer:

3.5 x 10^3 ml

Explanation:

We can use the ideal gas law to solve this problem:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the volume to liters and the pressure to atmospheres:

V = 3.50 x 10^-3 L

P = 3185 mmHg / 760 mmHg/atm = 4.19 atm

Next, we can solve for T:

T = PV / nR

T = (4.19 atm) (0.505 mol) (0.08206 L atm mol^-1 K^-1) / (3.50 x 10^-3 L)

T = 1074 K

Therefore, at a temperature of 1074 K (801°C or 1474°F), 0.505 mole of CO2 will occupy a volume of 3.50 x 10^3 ml at a pressure of 3185 mmHg.

If the value of ΔG° is equal to 0, then the value of K or Kp is equal to 1 and the system is said to be in equilibrium.

A change in temperature occurs when heat flow increases or decreases the temperature. This changes the chemical equilibrium towards the products or the reactants. This can be identified by examining the reaction and determining whether it is an endothermic reaction or an exothermic reaction.

If the temperature is raised, the equilibrium constant decreases. If the forward reaction has an endothermic nature, the equilibrium constant increases. The equilibrium position also changes when the temperature is changed.

To learn more about equilibrium, refer to the link:

https://brainly.com/question/30807709

#SPJ12

To create 100ml of a 4% w/v stock solution, how many grams of neutral red would your IA have to use? It is 4 gm.

Let's calculate this in detail:

To make 100 ml of 4% w/v stock solution of Neutral Red dye, the quantity of Neutral Red that must be used can be calculated as follows:

Weight of Neutral Red = (Volume x Concentration x 10^4) / 100

Weight of Neutral Red = (100 x 4 x 10^4) / 100

Weight of Neutral Red = 4000 mg = 4 gm

Therefore, to create 100 ml of a 4% w/v stock solution of Neutral Red dye, 4 gm of Neutral Red must be used. Hence, the correct answer is 4 gm.

Learn more about solutions: What is meant by concentration of a solution​? https://brainly.com/question/17206790

#SPJ11

To calculate the heat transferred by the chemical reaction, we can use the equation:

q = mcΔT

where q is the heat transferred, m is the mass of the solution, c is the specific heat capacity of the solution, and ΔT is the change in temperature.

Given:

m = 155 g

c = 4.184 J/g⋅K

ΔT = 26.5 ºC - 22.0 ºC = 4.5 ºC

Substituting these values into the equation, we get:

q = (155 g) x (4.184 J/g⋅K) x (4.5 ºC)

q = 29168.98 J or approximately 29.2 kJ

Therefore, the heat transferred by the chemical reaction to the calorimeter reservoir is 29.2 kJ.

For more questions like reactions visit the link below:

https://brainly.com/question/29555042

#SPJ11

The temperature of the sample of CO² gas is 87.41 Kelvin.

Combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that "the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.

It is expressed as;

P₁V₁/T₁ = P₂V₂/T₂

At STP (standard temperature and pressure), the temperature is 273.15 K and the pressure is 1 atm.

Therefore, we can use the combined gas law to solve for the final temperature:

P₁V₁/T₁ = P₂V₂/T₂

Where P₁ = 1 atm, V₁ = 0.50 L, T₁ = 273.15 K, P₂ = 1.6 atm, V₂ = 0.10 L, and we are solving for T₂.

Substituting the values and solving for T2, we get:

T₂ = (P₂V₂T₁) / (P₁V₁)

T₂ = ( 1.6 atm × 0.10 L × 273.15 K) / (1 atm × 0.50 L)

T₂ = 87.41 K

Therefore, the temperature of the sample is 87.41 K.

Learn more about the combined gas law here: brainly.com/question/25944795

#SPJ1

Answer:

The major ion in seawater is chloride.

Explanation:

Seawater is composed of various ions such as sodium, magnesium, sulfate, and chloride. However, the most abundant ion in seawater is chloride (Cl-), which accounts for approximately 55% of the total ion concentration. This is due to the fact that chloride is a relatively stable ion and does not react with other ions in seawater. Therefore, it tends to accumulate in seawater over time, making it the most prevalent ion in seawater.

Answer: THE ANSWER IS OPTION D) chloride.

Explanation: I GOT A 100 ON THE QUIZ ( please mark brainliest )

The correct formula for copper(II) phosphate is Cu3(PO4).

Copper (II) phosphate is a compound made up of copper ions and phosphate ions. Its chemical formula is Cu3(PO4)2. Copper(II) phosphate is a deep blue colour and has a high boiling point because of the strong bonds between the copper and phosphate ions.The chemical formula for copper(II) phosphate is Cu3(PO4)2.

A chemical formula is a collection of chemical symbols used to express the elements, atoms, and molecules in a chemical compound. They are a shorthand method of representing chemical compounds, and the chemical composition of molecules, elements, and atoms can be deduced from them. Chemical formulas are essential in chemistry because they provide the necessary details for reactions, such as how many atoms are present in a molecule or the number of each type of atom that is required to balance the equation.

Learn more about Copper (II) phosphate at:

https://brainly.com/question/25867932

#SPJ11

Lindane (hexachlorocyclohexane) is an agricultural insecticide that can also be used to treat head lice. The lowest energy chair conformation of lindane is a slightly puckered chair conformation, which is a six-membered ring of alternating single and double bonds.  The hydrogen atoms are positioned in an axial orientation and the chlorine atoms are in an axial orientation.
Lindane (hexachlorocyclohexane) is an agricultural insecticide that can also be used in the treatment of head lice. The lowest energy chair conformation of lindane isThe lowest energy chair conformation of lindane is the one with the Cl atom and the H atom in equatorial positions. The molecule of lindane consists of six carbon atoms joined together in the form of a ring.Each carbon atom is attached to one hydrogen atom and one chlorine atom. The relative orientations of the C-H and C-Cl bonds determine the conformation of the molecule. The ring can assume various conformations, and the lowest energy conformation is the most stable. The conformation of the molecule can be analyzed by assigning axial and equatorial positions to the atoms on the carbon ring. In the axial position, the atoms are oriented perpendicular to the ring. In the equatorial position, the atoms are oriented at an angle of 120° with respect to the ring. The axial orientation is less stable than the equatorial orientation because the axial atoms experience steric hindrance from the other atoms on the ring. The steric hindrance is reduced in the equatorial orientation, and this results in a lower energy conformation. Thus, the lowest energy chair conformation of lindane is the one with the Cl atom and the H atom in equatorial positions.

For more such questions on Insecticide

https://brainly.com/question/20461621

#SPJ11

the radioactive decay of c14 which is used in estimating the age of archaeological  after 2500 years, 0.0027 mol of c14 remain in the sample.

The amount of c14 remaining after 2500 years can be calculated using the first-order rate equation:

N(t) = N0 * e^(-kt)

where N0 is the initial amount of c14, N(t) is the amount remaining after time t, k is the decay constant, and e is the base of the natural logarithm. The half-life of c14 is given as 5725 years, which means that k can be calculated as:

k = ln(2)/t1/2 = ln(2)/5725

Substituting the values given in the problem, we get:

k = ln(2)/5725 = 1.21 * 10^-4 /year

Now, we can use the rate equation to find the amount of c14 remaining after 2500 years:

N(2500) = 0.0035 * e^(-1.21*10^-4 * 2500) = 0.0027 mol

For more similar questions on radioactive decay,

brainly.com/question/29107025

#SPJ11

The compound in which the oxidation state of oxygen is -1 is H2SO4, also known as sulfuric acid.

It is an inorganic, strong acid that has two hydrogen atoms, one sulfur atom, and four oxygen atoms. The oxidation state of oxygen in this compound is -1 because it has been oxidized by the sulfur atom, which has an oxidation state of +6.

The other compounds listed (KCH3COO, O2, H2O2, and H2O) do not have an oxidation state of -1 for oxygen. KCH3COO is potassium acetate, which has two oxygen atoms with oxidation states of -2 and +4, respectively. O2 is oxygen gas, which has an oxidation state of 0. H2O2 is hydrogen peroxide, which has two oxygen atoms with oxidation states of -1 and -1, respectively. Lastly, H2O is water, which has two hydrogen atoms and one oxygen atom, with the oxygen atom having an oxidation state of -2.

To know more about sulphuric acid click on below link :

https://brainly.com/question/28513840#

#SPJ11

When reactant molecules bind to the active site, the conformational or shape change that enzymes undergo is called induced fit.

Induced fit is the change in the shape of the active site of an enzyme, caused by the binding of a substrate. Induced fit helps in the proper alignment of the substrate with the catalytic site of the enzyme. It enhances the ability of the enzyme to carry out the chemical reaction.

Induced fit is a term used in biochemistry and enzyme kinetics. It describes the process of conformational changes in an enzyme when it binds to a substrate. This change helps in the proper orientation of the enzyme and substrate for the chemical reaction to occur.

Therefore we can say that the conformational or shape change that enzymes undergo when reactant molecules bind to the active site is called "induced fit."

To learn more about enzymes refer: https://brainly.com/question/13694504

#SPJ11