calculate the molarity of a solution made from 2.63 moles of nacl dissolved in a total volume of 500.0 ml.

The order of the reaction with respect to NO2 is x = 1, and the order of the reaction with respect to CO is y = 0.5.

No2 (g) + CO(g) → NO(g) + CO2(g) is the given chemical reaction to calculate the order of the reaction with respect to the following reactants according to the given experimental data as mentioned below:

Let's understand this in detail:

Order of reaction with respect to NO2:

We know that the rate of reaction is given by the formula as follows,

Rate = k[NO2]^x [CO]^yWhere,

k = Rate constant

[NO2] = Concentration of NO2

[CO] = Concentration of CO

x and y = Order of reaction with respect to NO2 and CO, respectively. The first experiment data is taken into account for calculating the order of reaction with respect to NO2 as follows:

1.44 x 10^-5 = k [0.263]^x [0.826]^y......(i)

The second experiment data is taken into account for calculating the order of reaction with respect to NO2 as follows:1.44 x 10^-5 = k [0.263]^x [0.413]^y......(ii)

Now, dividing equation (i) by equation (ii), we get

[0.826]^y/[0.413]^y = 1 => (2)^(2y) = 2 => 2y = 1 => y = 0.5

Substituting the value of y in equation (i), we get

1.44 x 10^-5 = k [0.263]^x [0.826]^0.5=> k = 0.015

Therefore, the order of the reaction with respect to NO2 is x = 1.

Order of reaction with respect to CO:

The first experiment data is taken into account for calculating the order of reaction with respect to CO as follows:

1.44 x 10^-5 = k [0.263]^x [0.826]^y......(i)

The third experiment data is taken into account for calculating the order of reaction with respect to CO as follows:

5.76 x 10^-5 = k [0.526]^x [0.413]^y......(ii)

Now, dividing equation (i) by equation (ii), we ge

t[0.826]^y/[0.413]^y = 2 => 2y = 1 => y = 0.5

Substituting the value of y in equation (i), we get1.44 x 10^-5 = k [0.263]^x [0.826]^0.5=> k = 0.015

Therefore, the order of the reaction with respect to CO is y = 0.5. Hence, the order of the reaction with respect to NO2 is x = 1, and the reaction with respect to CO is y = 0.5.

Learn more about the order of reaction: What is the order of reaction with respect to a and b for a reaction that obeys the rate law: rate = k[a]4[b]5? https://brainly.com/question/28179168

#SPJ11

1. The concentration of the hydronium ion, [H₃O⁺] is 3.02×10⁻¹⁰ M

2. The concentration of the hydroxide ion, [OH⁻] is 3.31×10⁻⁵ M

The concentration of the hydronium ion, [H₃O⁺], can be obtained as follow:

pH of a solution is given by the following formula:

pH = -Log [H₃O⁺]

Inputting the various parameters, we have

9.52 = -Log [H₃O⁺]

Multiply through by -1

-9.52 = Log [H₃O⁺]

Take the anti-log of -9.52

[H₃O⁺] = Anti-log -9.52

[H₃O⁺] = 3.02×10⁻¹⁰ M

The value of the the hydroxide ion, [OH⁻], can be obtained as follow:

[H₃O⁺] × [OH⁻] = 10¯¹⁴

3.02×10⁻¹⁰ × [OH⁻] = 10¯¹⁴

Divide both side by 3.02×10⁻¹⁰

[OH⁻] = 10¯¹⁴ / 3.02×10⁻¹⁰

[OH⁻] = 3.31×10⁻⁵ M

Learn more about hydroxide ion concentration, [OH⁻]:

https://brainly.com/question/19800885

#SPJ1

The partial pressure of CH4 in the mixture is 239 torr.

To find the partial pressure of CH4 in the mixture, we need to use the mole fraction of CH4.

First, we need to find the moles of each component in the mixture. The molar mass of CH4 is 16.04 g/mol, so:

moles of CH4 = 90.0 g / 16.04 g/mol = 5.61 mol

The molar mass of Ar is 39.95 g/mol, so:

moles of Ar = 10.0 g / 39.95 g/mol = 0.250 mol

The total number of moles in the mixture is:

total moles = moles of CH4 + moles of Ar = 5.61 mol + 0.250 mol = 5.86 mol

Now we can find the mole fraction of CH4:

mole fraction of CH4 = moles of CH4 / total moles = 5.61 mol / 5.86 mol = 0.957

Finally, we can use the mole fraction to find the partial pressure of CH4 using Dalton's Law of Partial Pressures:

partial pressure of CH4 = mole fraction of CH4 x total pressure

partial pressure of CH4 = 0.957 x 250 torr = 239 torr

Therefore, the partial pressure of CH4 in the mixture is 239 torr.

To know more about pressure click here:

brainly.com/question/12971272

#SPJ4

In order to prepare benzoic acid, the reactants that could be used are Na/NH2 and Reactant A Reactant B O3. In a chemical equation, a chemical reaction is described using chemical formulas and symbols.

Benzoic acid is a white crystalline powder that is somewhat soluble in water. It has a mild, sweet odor and a sour, astringent flavor. It is an organic acid that occurs naturally in several plants and animals' tissues. Benzoic acid is a colorless crystalline solid that is an important precursor for the synthesis of many other organic compounds.

Benzoic acid can be prepared by reacting a Grignard reagent with carbon dioxide, reducing the resulting carboxylic acid, or from toluene using the Perkin reaction. The reactants that could be used to prepare benzoic acid are: Na/NH2Reactant A Reactant B O3. The chemical equation for the preparation of benzoic acid from Na/NH2 is:

C6H5NO2 + 3H2 => C6H5COOH + 2NH3

The chemical equation for the preparation of benzoic acid from Reactant A Reactant B O3 is:

C6H5CH3 + 2O3 => C6H5COOH + H2O + O2

More on benzoic acid: https://brainly.com/question/31109708

#SPJ11

The symbol for the oxygen isotope with 9 neutrons is O-16.

The atomic number of oxygen is 8, which means it has 8 protons. The mass number for oxygen-16 is 16, which refers to the total number of particles in the nucleus (8 protons + 8 neutrons). The element symbol for oxygen is O.

Isotopes are atoms that have the same number of protons but different numbers of neutrons.

Oxygen-16 has a total of 9 neutrons, meaning it has one more neutron than the most common isotope of oxygen (oxygen-15, with 8 neutrons).

Due to the difference in neutron numbers, the atomic mass of oxygen-16 is slightly larger than oxygen-15.

Atomic mass is the combined mass of all of the protons and neutrons in an atom's nucleus. In oxygen-16, the protons and neutrons have a combined mass of 16, hence the mass number of 16.

Oxygen-16 is an important isotope because it is present in significant amounts in the Earth's atmosphere and is used in numerous medical and scientific applications.

to know more about isotope refer here:

https://brainly.com/question/11680817#

#SPJ11

The polarity of a molecule is determined by both the type of bonds and the shape of the molecule. Polar bonds result in a molecule being polar, while non-polar bonds result in a molecule being non-polar. The shape of the molecule can also affect the polarity of the molecule. Molecules that are symmetrical are non-polar, while those that are asymmetrical are polar.

Polar bonds occur when two atoms share electrons unequally, leading to a permanent dipole moment. These molecules are said to be polar. On the other hand, non-polar molecules occur when the atoms involved in the bond share electrons equally, resulting in a non-polar molecule.

The shape of the molecule also plays a role in determining the polarity of the molecule. If the shape of the molecule is symmetrical, with an equal distribution of electrons, then it is considered non-polar.  

Know more about dipole moment here:

https://brainly.com/question/14140953

#SPJ11

The concentration of the original NaOH solution is 0.189 M.

What is Concentration?

Concentration is a measure of the amount of solute dissolved in a given amount of solvent or solution. It describes how much of a particular substance is present in a given volume or mass of a solution.

NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)

From the equation, we can see that the stoichiometry of the reaction is 1:1 between NaOH and HCl. This means that one mole of NaOH reacts with one mole of HCl.

We are given the volume of the NaOH solution as 35.0 mL, but we need to convert this to liters in order to use the concentration units of Molarity (mol/L).

35.0 mL = 0.0350 L

We are also given the volume and concentration of the HCl solution:

Volume of HCl solution = 26.5 mL = 0.0265 L

Concentration of HCl solution = 0.250 M

To determine the number of moles of HCl used in the reaction, we can use the following equation:

moles of HCl = concentration of HCl × volume of HCl solution

moles of HCl = 0.250 M × 0.0265 L = 0.006625 moles

Since the stoichiometry of the reaction is 1:1 between NaOH and HCl, the number of moles of NaOH used in the reaction is also 0.006625 moles.

To calculate the concentration of the original NaOH solution, we can use the following equation:

concentration of NaOH = moles of NaOH / volume of NaOH solution

concentration of NaOH = 0.006625 moles / 0.0350 L = 0.189 M

Learn more about Concentration from given link

https://brainly.com/question/17206790

#SPJ1

The processes that occur are:

Methanol (CH3OH) Dissolution: CH3OH + H2O → CH3OH2+ + OH−

Hydrogen Chloride (HCl) Dissolution: HCl + H2O → H3O+ + Cl−

Sodium Hydroxide (NaOH) Dissolution: NaOH + H2O → Na+ + OH−

Methanol (CH3OH), hydrogen chloride (HCl) and sodium hydroxide (NaOH) all dissolve in water. When these compounds dissolve in water, different processes occur.

When methanol dissolves in water, it forms an ionic bond, where the positive hydrogen atoms of the methanol molecule interact with the negative oxygen atoms of the water molecule.

This process is known as hydrogen bonding, and is represented in the following equation: CH3OH + H2O → CH3OH2+ + OH−.

When hydrogen chloride dissolves in water, it undergoes hydrolysis, where the HCl molecule separates into a hydrogen ion (H+) and chloride ion (Cl-). This is represented in the following equation: HCl + H2O → H3O+ + Cl−.

Lastly, when sodium hydroxide dissolves in water, it forms an ionic bond, where the NaOH molecule separates into a sodium ion (Na+) and hydroxide ion (OH-).

This is represented in the following equation: NaOH + H2O → Na+ + OH−.

In summary, methanol undergoes hydrogen bonding, hydrogen chloride undergoes hydrolysis, and sodium hydroxide forms an ionic bond when dissolved in water.

The chemical equations and sketches for each process are included below:

Methanol (CH3OH) Dissolution: CH3OH + H2O → CH3OH2+ + OH−

Hydrogen Chloride (HCl) Dissolution: HCl + H2O → H3O+ + Cl−

Sodium Hydroxide (NaOH) Dissolution: NaOH + H2O → Na+ + OH−

to know more about methanol refer here

https://brainly.com/question/3006705#

#SPJ11

Answer: The hydroxyproline residue in collagen contributes to the stability of the collagen triple helix by forming hydrogen bonds, which is responsible for the unique mechanical properties of collagen.

To understand why hyp-containing collagen molecules have greater stability, a group of investigators conducted an investigation. Hyp stands for hydroxyproline, which is an important component of collagen.

Collagen is a protein that provides structure to the skin, bones, and other tissues. Collagen molecules with hyp are more stable due to the presence of hydrogen bonds. Hydrogen bonding is a type of chemical bond that occurs when a hydrogen atom in one molecule is attracted to an electronegative atom, such as oxygen or nitrogen, in another molecule.

Hydroxyproline, also known as Hyp, is an important component of collagen. The additional oxygen and hydrogen atoms in the hyp-containing collagen molecules improve the molecule's stability. The hydroxyproline residue in collagen contributes to the stability of the collagen triple helix by forming hydrogen bonds, which is responsible for the unique mechanical properties of collagen.



Learn more about collagen here:

https://brainly.com/question/30244632#



#SPJ11

The most common end product of the chemical weathering of feldspar is clay minerals.

Chemical weathering refers to the decomposition of rocks or minerals due to chemical reactions, water, or atmospheric gases.

The surface area of rocks or minerals is increased as they become more weathered, making them more susceptible to erosion. Clay minerals are the most common end product of the chemical weathering of feldspar.

This is because feldspar minerals are extremely reactive to acidic solutions in the environment, and they can easily become hydrolyzed.

Hydrolysis of feldspar:During hydrolysis, feldspar reacts with water to form clay minerals, silica, and soluble salts.

The hydrolysis reaction:KAlSi3O8 + 2H2O → Al2Si2O5(OH)4 + 4SiO2 + K+ + 2H+ + 2OH-Albite,

which is a type of feldspar, reacts with water to create kaolinite clay minerals, which is the most common end product of the reaction.

This reaction results in an increase in volume, which causes the rock to crack and disintegrate.

The reaction also produces silica, potassium, and aluminum ions, which can be transported by water to other locations.

Chemical weathering of feldspar has a significant impact on soil formation and the availability of nutrients in the environment.

The most common end product of the chemical weathering of feldspar is clay minerals, which plays a vital role in soil structure and plant growth.

to know more about weathering refer here:

https://brainly.com/question/14426457#

#SPJ11

The percent ionization of a solution having a pH of 4.35 and an initial weak acid concentration of 0.00019 is 0.00021%.

To calculate this, first calculate the [H3O+] concentration.

This can be done by taking 10 raised to the power of the pH value, which in this case is 10^-4.35 = 3.2x10^-5 M.

Then, calculate the ionization fraction (alpha) using the equation alpha = [H3O+]/[HA], where [HA] is the initial weak acid concentration. In this case, alpha = 3.2x10^-5/0.00019 = 0.00021.

Finally, convert the ionization fraction to percent ionization using the equation Percent Ionization = 100 * alpha.

Thus, the percent ionization of the given solution is 0.00021 * 100 = 0.021%.

To know more about ionization, refer here:

https://brainly.com/question/14225136#

SPJ11

When adding the measurements 42. 1014 g + 190. 5 g, we get  7 significant figures. Those 7 significant figures are 2, 3, 2, 6, 0, 1 and 4.

Significant figures can be defined as the number of digits in a value which is often a measurement which contribute to the degree of accuracy of the value. We can start counting all the significant figures by starting the first non-zero digit. Significant figures of a number in positional notation are defined as digits in the number that are reliable and necessary to indicate the quantity of something. All zeros that occur between any two non zero digits are significant figures. Significant figures are known as the digits of a number which are meaningful in the terms of accuracy or in the term of precision. That involves any non-zero digits. When we are adding the measurements 42. 1014 g + 190. 5 g, the predicted 7 significant figures as it appears between the two non zero digits.

To learn more about Significant figures

https://brainly.com/question/24630099

#SPJ4

The complete question is,

When adding the measurements 42. 1014 g + 190. 5 g, the answer has ----------Significant figures.

The coulombs of electricity used will be 9,650 C.

To calculate the coulombs of electricity used in this experiment, you must first determine the number of moles of SnSO4 that were reacted.

5.51 g of metallic tin produced indicates that 0.100 moles of SnSO4 were reacted.

Now, coulombs of electricity can be determined using the equation Q = I x t, where I is the current, and t is the time.

Using the information provided, we can determine that the coulombs of electricity used in this experiment is equal to (I x t) = (steady current x time until 5.51 g of metallic tin was produced).

The coulombs of electricity used in this experiment can also be determined by considering the Faraday’s constant, which states that the amount of electricity needed to completely react one mole of a substance is equal to 96,500 coulombs.

Since the reaction involves 0.100 moles of SnSO4, the amount of electricity used is equal to 0.100 moles x 96,500 coulombs, which is equal to 9,650 coulombs.

To summarize, the amount of coulombs of electricity used in this experiment is 9,650 coulombs, and this can be determined using the equation Q = I x t, or by considering the Faraday’s constant. This amount of coulombs of electricity was used until 5.51 g of metallic tin was produced.

To know more about electricity, refer here:

https://brainly.com/question/2552395#

#SPJ11

In the "Reactions" section of your Pre-lab notebook, you should have two reaction schemes involving the alkene. The correct answer is option d.

The Pre-lab notebook is a collection of worksheets and pre-lab assignments that students must finish before lab. This may include preparing solutions, making graphs, filling out data tables, or writing lab reports.A pre-lab notebook is a place where students may record and evaluate their work before and during a laboratory session. It is a document that is kept by the student and used to help them comprehend the material that is presented to them.

The Pre-lab notebook is divided into three sections: the Procedures section, the Data section, and the Reactions section. An alkene is a hydrocarbon that contains a carbon-carbon double bond. Alkenes are typically unsaturated and highly reactive. Alkenes are used in a variety of industries, including the production of plastics, synthetic rubbers, and fibers. Alkenes are also used as solvents in many applications.

They are known for their ability to react with a variety of other compounds. This will ensure you cover a range of possible reactions and provide a comprehensive understanding of the alkene's behavior in different situations.

To know more about alkene, refer here:

https://brainly.com/question/31033378#

#SPJ11

Answer: The reason a diazonium group on a benzene ring cannot be used to direct an incoming substituent to the meta position is due to the fact that diazonium groups are highly reactive and unstable. When they are present on the benzene ring, they tend to undergo rapid chemical reactions, which cause them to be quickly removed from the ring.

This means that they cannot effectively direct incoming substituents to the meta position, as they are not present long enough to exert a significant effect on the reaction. Additionally, the highly reactive nature of diazonium groups makes them prone to react with other reagents in the reaction, which can cause unwanted side reactions and limit the efficiency of the overall reaction.

In conclusion, a diazonium group on a benzene ring cannot be used to direct an incoming substituent to the meta position due to their highly reactive and unstable nature, which causes them to undergo rapid chemical reactions and limits their ability to effectively direct the reaction.

Learn more about diazonium group here:

https://brainly.com/question/29357767#




#SPJ11

169.0 g of [tex]AuCl _{3}[/tex] can liberate 118.4 g of [tex]Cl_{2}[/tex] gas upon decomposition. The molar mass of [tex]AuCl _{3}[/tex] is 303.33 g/mol, which means that 1 mole of [tex]AuCl _{3}[/tex]contains 3 moles of chlorine (3 atoms of chlorine).

To determine the moles of [tex]AuCl _{3}[/tex]in 169.0 g, we divide the mass by the molar mass:

169.0 g / 303.33 g/mol = 0.557 moles of [tex]AuCl _{3}[/tex]

Since each mole of [tex]AuCl _{3}[/tex] produces 3 moles of chlorine, the total moles of chlorine that can be liberated from the decomposition of 0.557 moles of [tex]AuCl _{3}[/tex]is:

0.557 moles x 3 = 1.671 moles of [tex]Cl_{2}[/tex]

Finally, we use the molar mass of chlorine ([tex]Cl_{2}[/tex]), which is 70.90 g/mol, to convert the moles of [tex]Cl_{2}[/tex]to grams:

1.671 moles x 70.90 g/mol = 118.4 g of [tex]Cl_{2}[/tex]

Therefore, 169.0 g of [tex]AuCl _{3}[/tex]can liberate 118.4 g of [tex]Cl_{2}[/tex]gas upon decomposition.

Learn more about molar mass

https://brainly.com/question/22997914

#SPJ4

The final NaCl concentration when 279 ml of a 0.840 m NaCl solution is mixed with 442 ml of a 0.220 m NaCl solution is 0.46 m NaCl.

To calculate this, the formula for mixing two solutions of different concentrations is:
C₁V₁ + C₂V₂ = CfVf,

where C₁ and C₂ are the concentrations of each solution, V₁ and V₂ are the volumes of each solution, and Cf and Vf are the final concentration and volume, respectively.

Using the formula, we can calculate the final NaCl concentration to be 0.476 m by solving for Cf.

Cf = (C₁V₁ + C₂V₂) / Vf

Cf = ((0.840 m × 279 ml) + (0.220 m × 442 ml)) / (279 ml + 442 ml)

Cf = 0.476 m NaCl.

Learn more about concentration here: https://brainly.com/question/29457847.

#SPJ11

Firefighters must create a safe distance, alert the appropriate authorities, recognise the dangers, secure the area, follow the correct procedures for handling hazardous chemicals.

When a structure is on fire, the hunt for the point of origin starts outside and progresses within the building. Firefighters must always use PPE and respiratory protection while looking for the source of the problem until it is confirmed that the environment is safe.

By turning the water into steam, the fire's heat is absorbed, oxygen is displaced, and the hot gas layer is suitably cooled for the safety of the firefighters.

To know more about hazardous visit:-

https://brainly.com/question/13340017

#SPJ1

The velocity of gas molecules in the gas phase and the temperature of the gas has: a direct relationship.

When gas molecules move they have kinetic energy, which is responsible for the velocity of gas molecules in the gas phase. The velocity of gas molecules depends on the temperature of the gas. As the temperature of the gas increases, the velocity of the gas molecules increases too.

The velocity of the gas molecules also depends on the mass of the gas molecules, temperature, and pressure of the gas. In other words, the velocity of gas molecules in the gas phase is directly proportional to the temperature of the gas. This relationship is known as the Kinetic Theory of Gases.

This theory states that the higher the temperature of a gas, the faster its molecules move. This is due to the increase in the kinetic energy of the gas molecules. When the temperature of the gas is increased, the kinetic energy of the molecules also increases.

This increase in kinetic energy causes the gas molecules to move faster, which results in an increase in the velocity of gas molecules in the gas phase. When the temperature of the gas is decreased, the kinetic energy of the molecules decreases, which results in a decrease in the velocity of gas molecules in the gas phase.

Therefore, the velocity of gas molecules in the gas phase is directly proportional to the temperature of the gas.

To know more about molecules refer here:

https://brainly.com/question/19922822#

#SPJ11

The enthalpy change when 100. g of ice at 0.0°C is heated to liquid water at 50.0°C is equal to 333J/g x 100g = 33300 J.

This is because the heat of fusion of water is 333J/g and it takes 33300J of energy to melt 100g of ice at 0.0°C.

The process of melting the ice can be broken down into two steps. First, the ice needs to be heated from 0.0°C to its melting point (0.0°C).

This requires energy to overcome the intermolecular forces that are keeping the ice solid, but no heat is absorbed or released. Second, the ice needs to be heated from its melting point to 50.0°C.

This is when the heat of fusion is released and 333J of energy is absorbed for every gram of ice melted. Therefore, 333J/g x 100g = 33300J of energy must be supplied to the system for the ice to melt and reach 50.0°C.

To know more about heat of fusion click on below link:

https://brainly.com/question/14053504#

#SPJ11

One of the major reasons that physical properties do not differ much from one gaseous substance to another is that gases have weak intermolecular forces between their particles.

The physical properties of a substance are those characteristics that can be measured or observed without causing any change in the substance's identity or composition.

The physical properties of gases include their volume, mass, pressure, temperature, and density.

Boyle's law, Charles's law, and Avogadro's law are three important gas laws that help to describe the physical behavior of gases.

Boyle's law describes the relationship between volume and pressure at a constant temperature.

Charles's law describes the relationship between volume and temperature at a constant pressure.

Avogadro's law describes the relationship between volume and the number of particles at a constant temperature and pressure.

Gases can expand or contract based on the conditions under which they are being held. Gases are highly compressible, and they fill any container that they are placed in.

Because gases have weak intermolecular forces, they can move about freely and do not have a fixed shape.

To know more about intermolecular forces, refer here:

https://brainly.com/question/9007693#

#SPJ11

The statement that describes how a chain reaction results from the nuclear fission of uranium-235 is:  It produces neutrons that strike other nuclei and cause more fission.

Option C.

When a neutron strikes the nucleus of a uranium-235 atom, the nucleus splits into two smaller nuclei and releases two or three neutrons.

These neutrons can then go on to strike other uranium-235 nuclei, causing them to undergo fission and releasing more neutrons. This process continues in a chain reaction, producing a large amount of energy in the form of heat.

However, in order to sustain the chain reaction, there must be enough uranium-235 present and the neutrons must be slowed down to increase the probability of their striking other nuclei.

Learn more about chain reaction here: https://brainly.com/question/6572079

#SPJ1

The percent by weight (w/w%) of sugar in soda, assuming the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g, is 8.38%.

The mass percent composition of a compound is a measure of the ratio of the mass of each component to the total mass of the compound. It is denoted by w/w%.

The mass percentage of a component in a solution can be calculated using the following formula:

the mass percent of a component = (mass of the component ÷ total mass of solution) × 100

Assume the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g.

To determine the weight percentage of sugar in soda, the mass percent composition formula can be used as follows:

mass percent of sugar = (mass of sugar ÷ total mass of soda) × 100

mass percent of sugar = (31.0 g ÷ 370.0 g) × 100

mass percent of sugar = 0.0838 × 100

mass percent of sugar = 8.38%

Therefore, the percent by weight (w/w%) of sugar in soda, assuming the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g, is 8.38%.

Know more about Mass percent composition here :

https://brainly.com/question/29520914

#SPJ11

Answer:

H2O (2x1.008 + 1x15.999) = 18.015 g/mol

CO2 (1x12.011 + 2x15.999) = 44.01 g/mol

BF3 (1x10.81 + 3x18.998) = 67.81 g/mol

K2O (2x39.098 + 1x15.999) = 94.20 g/mol

BaCO3 (1x137.33 + 1x12.011 + 3x15.999) = 197.34 g/mol

LiNHCH3 and an ester are combined to create a SNAc mechanism, the LUMO in this process is Option C- C-O σ* bond.

SNAc (substitution nucleophilic acyl-oxygen cleavage) is a chemical reaction mechanism used to substitute an acyl group for a nucleophile on an ester or a similar carbonyl compound. The mechanism is initiated by the formation of a covalent intermediate, followed by a nucleophilic attack by the nucleophile.

LiNHCH3 is a nucleophile that can participate in a SNAc reaction. When mixed with an ester, the LUMO (lowest unoccupied molecular orbital) of the ester is required for the reaction to occur. A LUMO can either be a π* bond or a σ* bond. The C-O σ* bond in the ester is the LUMO in this SNAc reaction, according to the question. therefore, the answer is C. C-O σ* bond.

Learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ11

Answer:

c.no is a correct answer

An experiment that could be performed, using these three solutions and any two of the indicators used in this experiment; not including the Universal Indicator

That would allow you to correctly relabel the pipets is as follows: Beral pipets are thin glass tubes with a short stem that is used for precise liquid transfer. To relabel the pipets, one can perform an experiment.                               The experiment involves the use of the two indicators other than the Universal Indicator. In this case, we can use Bromothymol blue (BTB) and Phenolphthalein indicators. BTB indicator turns yellow in acidic solutions, and blue in basic solutions.

Phenolphthalein turns pink in basic solutions and is colourless in acidic solutions.Experiment:

Pour small amounts of each of the solutions into separate test tubes.

Add one of the indicators, BTB into one of the test tubes and Phenolphthalein into another test tube. Note down the color changes and the pH values.

Compare the color change of the unknown sample with the two solutions. For example, if the unknown sample turns yellow with BTB and colorless with Phenolphthalein, then the unknown solution must be acidic. Similarly, if the unknown sample turns blue with BTB and pink with Phenolphthalein, then the unknown solution must be basic.The pH range for which an indicator would be required to make certain of the identifications is as follows: To be certain about the identification of an unknown sample, the pH range for which an indicator would be required would be from pH 5 to 9. In this range, some solutions can have the same pH value. For example, NaOH, Na2CO3, and NaHCO3 solutions all have a pH value of 8 to 9. Therefore, an universal indicator that would allow you to correctly relabel the pipets is as follows:Beral pipets are thin glass tubes with a short stem that is used for precise liquid transfer. would be required to make certain of the identifications in this range.

Learn more about Universal indicator here, https://brainly.com/question/31008951

#SPJ11

If a mechanism requires numerous parts to work together in order to operate properly, then the parts are said to be interdependent.

A mechanism is a collection of parts working together to accomplish a specific purpose or objective.  

The concept of mechanism is also utilized in engineering to describe objects that transmit or transform forces and motion, such as gears and linkages.

Interdependent is the term used to describe a group of components that are connected or dependent on one another in some way. If one component fails, the system will most likely fail completely or will no longer operate properly.

So, if a mechanism requires numerous parts to work together in order to operate properly, then the parts are said to be interdependent.

A machine is a type of mechanism. It is made up of interrelated parts that work together to perform a specific task.

Machines are used to accomplish a wide range of duties, from lifting and moving heavy objects to cutting and shaping materials. Machines have a variety of applications, and they are widely utilized in virtually every industry.

To know more about Mechanism refer here:

https://brainly.com/question/28258071#

#SPJ11

The flow of energy during a chemical reaction involves the absorption of energy to break initial bonds, followed by the release of energy during bond formation. The net energy change, or enthalpy change, determines whether the reaction is exothermic or endothermic.

When bonds are broken and formed in a chemical reaction, energy is involved in this process. The flow of energy that takes place when bonds are broken and formed in a chemical reaction is called energy transfer. The transfer of energy takes place from one molecule to another molecule.

Hence, the term transfer of energy is used to describe the flow of energy that takes place in this process.

According to the law of conservation of energy, energy cannot be created nor destroyed, but it can be transformed from one form to another. Therefore, when a bond is broken, energy is absorbed or gained by the molecule, and when a bond is formed, energy is released or lost by the molecule.

Thus, in a chemical reaction, when a bond is broken, energy is absorbed by the molecule, and when a bond is formed, energy is released by the molecule. The energy released during a chemical reaction is called exothermic, and the energy absorbed during a chemical reaction is called endothermic.

To learn more about energy change refer: https://brainly.com/question/26176140

#SPJ11