CAN someone please help me with this please?

The presence of the ions in the HCl would make the solution to conduct electricity.

Because it separates into ions (H+ and Cl-) when hydrochloric acid is dissolved in water, HCl (hydrochloric acid) solution conducts electricity. The electric charge of the H+ and Cl- ions allows them to travel and convey current across the solution.

The dissociation constant (Ka) of HCl describes how much of the compound separates into ions depending on the concentration of the solution. A higher HCl concentration will produce more ions, which will increase conductivity.

Learn more about HCl:https://brainly.com/question/9004990

#SPJ1

The substances that can create a pH = 4 buffer solution are HCO₂H and KHCO₂.

When modest quantities of acid or base are added to a buffer solution, it resists changes in pH. In order to create a buffer solution, we need to have a weak acid and its conjugate base, or a weak base and its conjugate acid, in roughly equal amounts.

HCO₂H is a weak acid with a pKa of 3.74, and its conjugate base is HCO₂⁻. KHCO₂ is the potassium salt of HCO₂⁻, and it acts as a source of HCO₂⁻ ions, making it a good buffer component.

The other substances listed are not suitable for creating a pH = 4 buffer solution because they either do not have a pKa or pKb near 4, or they are neither a pair of a weak acid and its conjugate base, or a pair of a weak base and its conjugate acid..

To learn more about buffer solution, here

https://brainly.com/question/24262133

#SPJ4

In this problem, we are given the volume of a gas collected over water at a certain temperature and pressure. We need to determine the volume of the dry gas at STP (standard temperature and pressure).

First, we need to understand why the presence of water is important in this problem. When a gas is collected over water, some of the water vapor dissolves in the gas, which affects the volume of the gas we measure. In order to account for this, we need to use the concept of vapor pressure.

The vapor pressure of water at 22.0°C is 2.64 kPa. This means that at 22.0°C and 98.0 kPa, the total pressure is the sum of the pressure due to the gas and the pressure due to the water vapor. We can use Dalton's Law of Partial Pressures to calculate the pressure due to the gas alone:

P_gas = P_total - P_water vapor
P_gas = 98.0 kPa - 2.64 kPa
P_gas = 95.36 kPa

Now we can use the Ideal Gas Law to calculate the volume of the dry gas at STP:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, P = 101.3 kPa and T = 273.15 K.

We can rearrange the Ideal Gas Law to solve for the volume of the dry gas:

V_dry gas = (V_collected gas * P_gas * T_STP) / (P_STP * T_collected gas)

where V_collected gas is the volume of the gas collected over water, T_collected gas is the temperature of the gas collected over water, and T_STP is the temperature at STP.

Plugging in the numbers, we get:

V_dry gas = (1.85 L * 95.36 kPa * 273.15 K) / (101.3 kPa * 295.15 K)
V_dry gas = 1.60 L

Therefore, the volume of the dry gas at STP is 1.60 L. It's important to note that the volume of the dry gas is smaller than the volume of the gas collected over water, because some of the volume was occupied by water vapor.

To know more about STP refer here

https://brainly.com/question/24050436#

#SPJ11

The gas would occupy 90 L at a final pressure of 200 mmHg if the amount of gas does not change.

To determine how many liters this gas would occupy at a final pressure of 200 mmHg, we can use Boyle's Law. Boyle's Law states that the product of the initial pressure and volume of a gas is equal to the product of the final pressure and volume if the temperature and amount of gas remain constant. The formula for Boyle's Law is:

P₁ × V₁ = P₂ × V₂

Where P₁ is the initial pressure (1800 mmHg), V₁ is the initial volume (10 L), P₂ is the final pressure (200 mmHg), and V₂ is the final volume we need to find.

Rearranging the formula to find V₂:
V₂ = (P₁ × V₁) / P₂

Substituting the values:

V₂ = (1800 mmHg × 10 L) / 200 mmHg
V₂ = 18000 L·mmHg / 200 mmHg
V₂ = 90 L

So, this gas would occupy 90 L at a final pressure of 200 mmHg if the amount of gas does not change.

To know more about Boyle's Law :

https://brainly.com/question/1437490

#SPJ11

The Goodyear Blimp filled with hydrogen can hold approximately 255,447.62 moles of hydrogen.

To find the number of moles of hydrogen that would fit into the blimp, we first need to calculate the mass of hydrogen that the blimp can hold.

The molar mass of hydrogen is 2.016 g/mol.

To calculate the mass of hydrogen that the blimp can hold, we multiply the volume of the blimp (5.74 x 10^6 L) by the density of hydrogen at standard temperature and pressure (STP), which is 0.0899 g/L:

Mass of hydrogen = volume of blimp x density of hydrogen at STP
Mass of hydrogen = 5.74 x 10^6 L x 0.0899 g/L
Mass of hydrogen = 515,026 g

Now, we can calculate the number of moles of hydrogen by dividing the mass of hydrogen by its molar mass:

Number of moles of hydrogen = mass of hydrogen / molar mass of hydrogen
Number of moles of hydrogen = 515,026 g / 2.016 g/mol
Number of moles of hydrogen = 255,447.62 mol

So, approximately 255,447.62 moles of hydrogen would fit into the Goodyear Blimp under standard temperature and pressure conditions.

Learn more about moles at https://brainly.com/question/29367909

#SPJ11

The heat energy associated with the reaction of 35g of aluminum with excess hydrochloric acid is -5,380 kJ. This is calculated by multiplying the number of moles of aluminum (0.2 mol) by the enthalpy change of the reaction (-152 kJ/mol) to give -30.4 kJ.

This is then multiplied by the mass of aluminum (35g) to give -5,380 kJ.

In this reaction, heat energy is released as a result of the formation of bonds between the aluminum and the hydrochloric acid.

This means that the enthalpy change is negative, indicating that the reaction is exothermic. The reaction can be represented by the equation 2Al + 6HCl → 2AlCl3 + 3H2, with an enthalpy change of -152 kJ/mol.

Know more about Hydrochloric acid here

https://brainly.com/question/15231576#

#SPJ11

1.2 grams of Barium Chloride (BaCl₂) are needed to make 220 mL of 0.040 M solution.

To determine the amount of grams of Barium Chloride (BaCl₂) needed to compound a 220 mL 0.040 M solution, we can implement the following formula:

mass (in grams) = molarity × volume (in liters) × molar mass

convert the volume of the mixture from milliliters (mL) to litres (L):

220 mL =  0.220 L by : 220/1000

The molar mass of BaCl₂ is 137.33 g/mo

Therefore, when utilizing the equation above, we can deduce that:

mass = 0.040 mol/L × 0.220 L × 137.33 g/mol = 1.2 g

Learn more about Barium Chloride at

https://brainly.com/question/29519054

#SPJ1

When reglazing, you cover the areas that were forgotten in the 2nd firing as well as reglaze everywhere for a uniform appearance.

Reglazing involves applying a new layer of glaze to a previously fired ceramic piece to improve its appearance, fix any issues from previous firings, or to achieve a specific effect.

In your case, if some areas were missed or improperly glazed during the 2nd firing, you would want to apply glaze to those forgotten areas to ensure a consistent finish.

However, it's important to reglaze the entire piece, not just the missed areas, to maintain a uniform appearance and avoid any inconsistencies in the final result. Before reglazing, make sure the ceramic piece is clean and free of dust or debris.

Apply the glaze evenly, using an appropriate technique such as brushing or dipping, and then fire the piece again according to the glaze's specific firing temperature and instructions. This should result in a well-glazed and visually appealing ceramic piece.

To know more about firing temperature click on below link:

https://brainly.com/question/29363846#

#SPJ11

The mass of the airplane is 80,000 kg.

To find the mass of the airplane, we can use the formula for momentum:
momentum = mass x velocity

We are given the momentum of the airplane, which is 19,680,000 kg•m/s, and the velocity, which is 246 m/s.

So, we can rearrange the formula to solve for mass:
mass = momentum / velocity

Plugging in the values we have, we get:
mass = 19,680,000 kg•m/s / 246 m/s

Simplifying this expression gives us:
mass = 80,000 kg
Therefore, the mass of the airplane is 80,000 kg.

To know more about momentum :

https://brainly.com/question/29598011

#SPJ11

Answer:

An electron has a negative charge therefore, losing the electron will cause the atom to be a positive ion. An ion is an atom where the number of protons does not equal the number of electrons.

4.28 moles of nitrogen gas are generated by the complete reaction of 8.56 moles of ammonia.

To find out how many moles of nitrogen gas are generated by the complete reaction of 8.56 moles of ammonia, we can use the balanced chemical equation: 4NH3 + 3O2 → 2N2 + 6H2O.

Step 1: Identify the mole ratio between ammonia (NH3) and nitrogen gas (N2). From the balanced equation, we see that 4 moles of NH3 produce 2 moles of N2. This gives us a mole ratio of 4:2 or 2:1.

Step 2: Use the mole ratio to determine the moles of nitrogen gas produced. Since the mole ratio is 2:1, for every 2 moles of NH3 that react, 1 mole of N2 is produced.

Step 3: Calculate the moles of nitrogen gas generated from 8.56 moles of ammonia. Divide the given moles of ammonia by the mole ratio:
8.56 moles NH3 / 2 = 4.28 moles N2

Therefore, 4.28 moles of nitrogen gas are generated by the complete reaction of 8.56 moles of ammonia.

To know more about complete reaction refer here: https://brainly.com/question/22228278#

#SPJ11

The % mass of C6H12O6 in the new solution is approximately 67.2%.

We can calculate the mass percentage of C6H12O6 in the new solution using the following formula:

% mass = (mass of C6H12O6 / total mass of solution) x 100%

First, we need to calculate the total mass of the solution by adding the mass of C6H12O6 and the mass of cyclohexane:

total mass of solution = 8.50 g + 4.15 g = 12.65 g

Next, we can calculate the mass percentage of C6H12O6 in the solution:

% mass = (8.50 g / 12.65 g) x 100% ≈ 67.2%

Therefore, the % mass of C6H12O6 in the new solution is approximately 67.2%.

To know more about mass percentage refer here:

https://brainly.com/question/19694949

#SPJ11

The reaction A + B + 210 → C can be categorized as a combination reaction.

In a combination reaction, two or more reactants (A and B in this case) combine to form a single product (C). The number 210 could be a typo or an irrelevant part of the equation, as it does not fit the standard chemical notation.

Based on the information you provided, the reaction can still be categorized as a combination reaction. In a combination reaction, two or more reactants combine to form a single product.

In this case, reactants A and B react together to produce product C. However, without further information or a corrected equation, it is not possible to provide specific details about the reaction or the substances involved.

If you have any additional information or a revised equation, please provide it, and I would be happy to assist you further.

To learn more about reactants, refer below:

https://brainly.com/question/13005466

#SPJ11

The volume of oxygen gas produced when 3.81 g of Mg(ClO3)2 decomposes is 1.18 L at STP.

When magnesium chlorate (Mg(ClO3)2) is decomposed, it breaks down into oxygen gas (O2) and magnesium chloride (MgCl2). This reaction is an example of a decomposition reaction, which is a type of chemical reaction that involves the breakdown of a single compound into two or more simpler substances.

To determine the volume of oxygen gas produced when 3.81 g of Mg(ClO3)2 decomposes, we first need to calculate the number of moles of Mg(ClO3)2 in the sample. We can do this using the molar mass of Mg(ClO3)2, which is 214.2 g/mol:

Number of moles of Mg(ClO3)2 = mass / molar mass = 3.81 g / 214.2 g/mol = 0.0178 mol

Next, we need to use the balanced chemical equation for the decomposition of Mg(ClO3)2 to determine the number of moles of oxygen gas produced:

Mg(ClO3)2 -> MgCl2 + 3O2

According to this equation, for every mole of Mg(ClO3)2 that decomposes, three moles of oxygen gas are produced. Therefore, the number of moles of O2 produced in the reaction is:

Number of moles of O2 = 3 x number of moles of Mg(ClO3)2 = 3 x 0.0178 mol = 0.0534 mol

Finally, we can use the ideal gas law to calculate the volume of oxygen gas produced at STP (standard temperature and pressure, which are 0°C and 1 atm, respectively). The ideal gas law is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.

At STP, the pressure is 1 atm and the temperature is 273 K. Therefore, we can rearrange the ideal gas law to solve for the volume:

V = nRT / P = (0.0534 mol) x (0.08206 L atm/mol K) x (273 K) / (1 atm) = 1.18 L

Therefore, the volume of oxygen gas produced when 3.81 g of Mg(ClO3)2 decomposes is 1.18 L at STP.

To know more about oxygen, visit:

https://brainly.com/question/13370320#

#SPJ11

The landform that is a result of the chemical weathering of carbonate rock is

While the chemical weathering of carbonate rock does occur, it can result in voids or cavities under the surface. When sedimentary layers become unstable and unable to support their own weight, a concave impression known as a sinkhole will form.

Sinkholes are prevalent in areas that have an ample supply of carbonate rock, which itself poses a danger due to its potential impact on infrastructure and human well-being. It is important to note that the chemical deterioration of carbonate rock does not typically contribute to natural developments like mountains, dunes, or rivers.

Learn more about Sinkholes at

https://brainly.com/question/1856979

#SPJ1

The apparent loss of mass from 253.0 g to 250.2 g can be attributed to the involvement of a gas in the chemical reaction, either as a product or a reactant. This gas escapes the system during the reaction, causing a decrease in the observed mass, but the law of conservation of mass still holds true as the total mass is conserved in the reaction.

According to the law of conservation of mass, the total mass of the products of a chemical reaction should equal the total mass of the reactants. In your reaction, the mass went down from 253.0 g to 250.2 g, which seems to contradict this law. However, the apparent loss of mass can be explained by the involvement of a gas in the reaction.

Here's a step-by-step explanation:
1. Identify the given chemical equation. This will help in determining if a gas is produced or consumed in the reaction.
2. Examine the reactants and products to see if any of them are gases. Gases can escape the system during the reaction, causing a decrease in the observed mass.
3. If a gas is produced, this explains the apparent loss of mass. The mass of the gas is not being accounted for on the balance because it has escaped into the atmosphere.
4. If a gas is consumed, it may have been initially present in the system and was not measured in the initial mass. Once it is consumed, the mass of the system would appear to decrease.

In summary, the apparent loss of mass from 253.0 g to 250.2 g can be attributed to the involvement of a gas in the chemical reaction, either as a product or a reactant.

To know more about law of conservation of mass :

https://brainly.com/question/13600416

#SPJ11

The volume of the gas in the container at sea level and room temperature would be approximately 0.00676 L.

PV = nRT

Where:

P = pressure

V = volume

n = number of moles

R = gas constant

T = temperature

V = nRT / P

First, we need to calculate the number of moles of gas in the container:

n = PV / RT

Where:

P = 1.54 x[tex]10^{4}[/tex] mm Hg

V = 1.00 L

R = 8.31 J/mol*K (gas constant)

T = 88 K

Converting the pressure to kPa and the volume to m^3:

P = 1.54 x [tex]10^{4}[/tex] mm Hg * (101.3 kPa / 760 mm Hg) = 2054.59 Pa

V = 1.00 L * [tex]10^{-3}[/tex] [tex]m^{3}[/tex]/L) = 0.001 [tex]m^{3}[/tex]

n = (2054.59 Pa * 0.001 m^3) / (8.31 J/mol*K * 88 K) ≈ 0.000276 mol

P = 101.3 kPa

T = 23 + 273.15 K = 296.15 K

V = nRT / P

V = (0.000276 mol * 8.31 J/mol*K * 296.15 K) / 101.3 kPa

Converting the volume to liters:

V = 0.00676 L

Learn more about gas equation at

https://brainly.com/question/9908236

#SPJ1

The description that fits the reaction that was observed is endothermic because heat is being absorbed from the surroundings. Option D

Endothermic reaction stores energy. In the reaction that has occurred, heat energy was absorbed from the enviroment which makes the beaker to become cold.

Assuming it was an exothermic reaction, heat energy  would have been released to the surrounding of the beaker. the beaker would have felt warm or hot to the touch,

Find more exercises on endothermic reaction;

https://brainly.com/question/10373907

#SPJ1

The pressure inside the flattened can is 1000 kPₐ .

To solve this problem using the Ideal Gas Law formula and the given information. The terms involved in this question are pressure, volume, and the Ideal Gas Law (PV = nRT).

Here's the step-by-step explanation:
1. The initial state of the gas is given as: P₁ = 20.0 kPₐ and V₁ = 0.50 L.
2. The final state of the gas after being flattened is given as: V₂ = 0.010 L.
3. We need to find the final pressure, P₂.
4. Since the problem doesn't involve any changes in temperature or the amount of gas, we can use Boyle's Law, which is a simplified version of the Ideal Gas Law for constant temperature and amount of gas. Boyle's Law states that P₁V₁ = P₂V₂.
5. Plug in the given values: (20.0 kPₐ)(0.50 L) = P2(0.010 L).
6. Solve for P₂: P₂ = (20.0 kPₐ )(0.50 L) / 0.010 L = 1000 kPₐ .

The pressure inside the flattened can is 1000 kPₐ .

To know more about Ideal Gas Law:

https://brainly.com/question/30458409

#SPJ11

The hydrolysis of one ATP molecule has ΔG = -30.5 kJ mol⁻¹. Therefore, the minimum number of ATP molecules required to drive the hydrolysis of acetyl phosphate, with ΔG = -42 kJ mol⁻¹, is 2 ATP molecules.

The phosphorylation of acetic acid involves the transfer of a phosphate group from ATP to acetic acid, forming acetyl phosphate and ADP. The reaction can be represented as follows:

The hydrolysis of acetyl phosphate involves the addition of a water molecule, which breaks the phosphoanhydride bond and releases the energy stored in the phosphate bond. The reaction can be represented as follows:

The ΔG value of the hydrolysis of acetyl phosphate is -42 kJ mol⁻¹. Since the phosphorylation of acetic acid requires one ATP molecule, the minimum number of ATP molecules required to drive the hydrolysis of acetyl phosphate is calculated as follows:

Since the hydrolysis of one ATP molecule has ΔG = -30.5 kJ mol⁻¹, the minimum number of ATP molecules required to drive the hydrolysis of acetyl phosphate is 2.

To learn more about hydrolysis of ATP, here

https://brainly.com/question/30457911

#SPJ4

The pressure of the fluorine gas under these conditions is approximately 2.01 atmospheres.

To answer your question, we will use the Ideal Gas Law equation:

PV = nRT

Where:
P = pressure
V = volume (60.0 liters)
n = number of moles (4.80 moles)
R = gas constant (0.0821 L atm / K mol)
T = temperature (298 K)

We need to find the pressure (P). Rearrange the equation for P:

P = nRT / V

Now plug in the given values:

P = (4.80 moles * 0.0821 L atm / K mol * 298 K) / 60.0 liters

P ≈ 2.01 atm

So, the pressure of the fluorine gas under these conditions is approximately 2.01 atmospheres.

To learn more about temperature, refer below:

https://brainly.com/question/11464844

#SPJ11

You will need to observe each tube carefully and record your observations. Look at the color and consistency of the contents and note any unusual smells or other characteristics.

Smells are the odors that people detect when certain molecules enter their noses. Smells can be pleasant, such as the aroma of a freshly baked pie, or unpleasant, such as the odor of garbage. Humans can detect millions of different smells and each smell has its own unique molecular composition. Smells can be used to identify a particular item or to trigger a memory. People can even use smells to detect potential danger, such as the smell of smoke indicating a fire. Some animals, such as dogs, have a much more acute sense of smell than humans, and can be trained to detect certain smells, such as explosives or drugs. Smells are a powerful and often overlooked sense that can be used to enhance experiences or warn of potential danger.

To learn more about smells

https://brainly.com/question/26266398

#SPJ4

The subscript numbers in covalent compounds can be determined by the prefixes used in the written name of the compound.

Covalent compounds are formed by the sharing of electrons between atoms, and their names are derived from the prefixes used to indicate the number of each type of atom in the compound.

The prefix indicates the number of atoms of each element, and the second element is given an "-ide" ending. For example, carbon dioxide has one carbon atom and two oxygen atoms, and is written as CO₂. The prefix "di" indicates two atoms of oxygen, and the subscript "2" indicates that there are two oxygen atoms.

Similarly, dinitrogen trioxide has two nitrogen atoms and three oxygen atoms, and is written as N₂O₃. The prefix "di" indicates two nitrogen atoms, and the prefix "tri" indicates three oxygen atoms, thus leading to the correct subscript numbers.

To know more about Covalent compounds, refer here:

https://brainly.com/question/11632372#

#SPJ11

The breaking of the molecular bonds in H₂ and Cl₂ is considered an endothermic step because it requires energy input to break the bonds.

This energy is absorbed from the surroundings in the form of heat. On the other hand, the formation of new bonds between H and Cl atoms in the products is considered an exothermic step because it releases energy in the form of heat.

Overall, the reaction of H₂ with Cl₂ is an exothermic reaction because the energy released during the formation of new bonds is greater than the energy required to break the existing bonds. This means that the reaction releases heat into the surroundings.

To know more about exothermic reaction click on below link:

https://brainly.com/question/29206227#

#SPJ11

The solution has a Molarity of approx 0.01575 M.

To calculate the molarity of a solution, we use the formula:

Molarity (M) = moles of solute ÷ volume of solution in liters

First, we need to convert the volume of the solution from milliliters to liters:

Volume of solution = 400 mL = 400/1000 L = 0.4 L

Next, we need to calculate the moles of solute:

moles of solute = 6.3 x [tex]10^{-3[/tex] mol

Substituting these values into the formula, we get:

Molarity (M) = 6.3 x[tex]10^{-3[/tex] mol ÷ 0.4 L = 0.01575 M

Therefore, the molarity of the solution is 0.01575 M.

To know more about Molarity, here

brainly.com/question/8732513

#SPJ4

Hazel needs 0.6975 liters of water to make a 1.25M solution of Ni(NO₃)₂ using 45.7 grams of the solute.

To solve this problem, we need to use the formula:
Molarity (M) = moles of solute / liters of solution

First, we need to find the moles of nickel II nitrate:
moles = mass / molar mass

The molar mass of Ni(NO₃)₂ can be calculated by adding the molar masses of each element:
Ni: 58.69 g/mol
N: 14.01 g/mol
O (3 atoms): 3 x 16.00 g/mol = 48.00 g/mol

Total molar mass = 58.69 + 14.01 + 48.00 = 120.70 g/mol
So, the moles of Ni(NO₃)₂ used by Hazel is:
moles = 45.7 g / 120.70 g/mol = 0.3781 moles

Now, we can use the formula to find the volume of solution:

Molarity (M) = moles of solute / liters of solution
1.25 M = 0.3781 moles / liters of solution
Liters of solution = 0.3781 moles / 1.25 M = 0.3025 L

Therefore, the volume of water required to make the solution is:
Volume of water = Total volume - Volume of solute
Volume of water = 1 L - 0.3025 L = 0.6975 L

So, Hazel needs 0.6975 liters of water to make a 1.25M solution of Ni(NO₃)₂ using 45.7 grams of the solute.

To know more about Molarity :

https://brainly.com/question/19517011

#SPJ11

There are 2.74 moles of N₂ (g) present in 1.00 L of N₂ (g) at 100°C and 1 atm.

The number of moles can be calculated using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15 K. Thus, T = 100°C + 273.15 = 373.15 K .We also need to convert the pressure from atm to Pa by multiplying by 101,325 Pa/atm. Thus, P = 1 atm × 101,325 Pa/atm = 101,325 Pa.

We can now solve for n:

n = PV/RT = (101,325 Pa × 1.00 L)/(0.08206 L⋅atm/mol⋅K × 373.15 K) = 2.74 mol N₂ (g)

Therefore, in a 1.00 L container filled with N₂ (g) at a temperature of 100°C and pressure of 1 atm, there are 2.74 moles of N₂ (g) present

To know more about moles, refer here:

https://brainly.com/question/30759206#

#SPJ11

The volume of dry hydrogen gas at standard atmospheric pressure (which is typically defined as 1 atm or 101.325 kPa) depends on the number of moles of hydrogen gas present. The ideal gas law, PV = nRT, relates the pressure (P), volume (V), number of moles (n), and temperature (T) of an ideal gas. Assuming standard temperature and pressure (0°C and 1 atm), one mole of any ideal gas occupies a volume of 22.4 L. Therefore, to find the volume of dry hydrogen gas at standard atmospheric pressure, we need to know how many moles of hydrogen gas we have.

For example, if we have 1 mole of dry hydrogen gas at standard atmospheric pressure, the volume would be 22.4 L. If we have 0.5 moles of dry hydrogen gas, the volume would be 11.2 L. And so on.

0.0030 L - The significant figures are "3" and "0". There are two significant figures in this quantity.

0.1044 g - The significant figures are "1", "0", "4", and "4". There are four significant figures in this quantity.

53,069 mL - All digits are significant. There are five significant figures in this quantity.

0.00004715 m - In exponential notation, this is 4.715 x 10^-5 m. The significant figures are "4", "7", "1", and "5". There are four significant figures in this quantity.

57,600 s - The significant figures are "5", "7", and "6". There are three significant figures in this quantity.

0.0000007160 cm - In exponential notation, this is 7.160 x 10^-7 cm. The significant figures are "7", "1", "6", and "0". There are four significant figures in this quantity.

57600 - The significant figures are "5", "7", "6", and "0". There are three significant figures in this quantity.

Zeros at the beginning of a number are not significant, as they only indicate the decimal point's location. Trailing zeros after the decimal point are significant, as they indicate the precision of the measurement. However, trailing zeros before the decimal point are not significant, as they may be there only to indicate the scale of the number. In exponential notation, the number of significant figures is determined by the number of digits in the coefficient.

To know more about the Significant Figure, here

https://brainly.com/question/13061725

#SPJ4