The reactance of the coil is 21.98 ohms and its impedance to an alternating current is 30.21 ohms
The reactance of a coil with inductance L and frequency f is given by the formula : [tex]X_L = 2\pi fL.[/tex]
Using this formula and the values given, the reactance of the coil is
[tex]X_L = 2\pi (25)(0.35) = 21.98 ohms.[/tex]
The impedance of a coil is given by the formula Z = sqrt(R^2 + X_L^2), where R is the resistance of the coil. Using the values given, the impedance of the coil is Z = sqrt(20^2 + 21.98^2) = 30.21 ohms.
In summary, the reactance of the coil is 21.98 ohms and its impedance to an alternating current of 25 Hz is 30.21 ohms.
To know more about alternating current, here
brainly.com/question/11673552
#SPJ4
find the linear displacement of a car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad.
The linear displacement of a car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad is 27 meters.
Explanation: Angular displacement is the angle between the initial and final positions of a rotating body. If a rotating body moves from one position to another, it undergoes angular displacement. Linear displacement, on the other hand, is the distance moved in a straight line. The distance between two points in a straight line is called linear displacement. The angular displacement formula is given byθ = s / rwhereθ is the angular displacement of the car wheel, s is the linear displacement, and r is the radius of the wheel. Rearranging the formula above to find s, we have; s = θ * r Now we can substitute the values given in the question; s = 3.0 rad * 9.0 m = 27 m Therefore, the linear displacement of the car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad is 27 meters.
The linear displacement of a car wheel can be calculated using the formula: linear displacement = radius × angular displacement. In this case, the radius is 9.0 m and the angular displacement is 3.0 rad. Therefore, the linear displacement is 9.0 m × 3.0 rad = 27.0 m.
Learn more about Angular displacement here:
https://brainly.com/question/26483834
#SPJ4
Show that the magnitudes of the train's accelerations after 10s and after 35s are in the ratio 2:1.
The formula Acceleration= 160401 from Physics with Charlie a (10) a (35) = 2 1. fraca(10)a(35)=frac21 is used to get the train's acceleration.
How much is the acceleration, exactly?Finally, we may say that acceleration is indeed a fundamental idea in physics that explains how things move. The rate at which an item changes either trajectory or velocity, or both, is referred to as its magnitude of acceleration. Using the equation a = (v - u) / t, one can easily determine the magnitude of acceleration.
What is the magnitude formula?|v| =(output + y2) is the formula to calculate a vector's magnitude in two dimensions (x, y). The Pythagorean theorem is the foundation of this formula.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ1
a car rounds a curve with a radius of 40 m at a speed of 16 m/s. calculate the centripetal acceleration of the car.
The centripetal acceleration of the car rounding the curve is 6.4 m/s².
The following formula determines the centripetal acceleration of an item travelling in a circular path:
a = v² / r
a = v² / r
a = (16 m/s)² / 40 m
a = 6.4 m/s²
Acceleration is the rate of change of velocity. It is a vector quantity that describes how much an object's velocity changes per unit of time. Acceleration can be positive or negative, depending on whether an object is speeding up or slowing down, respectively. Acceleration can also occur when the direction of an object's motion changes, even if its speed remains constant. This is called centripetal acceleration and is responsible for the circular motion of objects, such as a car turning a corner or a planet orbiting a star.
Acceleration plays an important role in many areas of physics and engineering, including mechanics, electromagnetism, and relativity. It is also crucial for understanding everyday phenomena, such as the motion of vehicles, the behavior of roller coasters, and the forces experienced by astronauts during spaceflight.
To learn more about Acceleration visit here:
brainly.com/question/30660316
#SPJ4
Which statement listed below is false?
OPTIONS
As thermal equilibrium is reached, the system has less ability to do work.
Heat is the transfer of thermal energy from one substance to another.
Thermal energy relates to both heat and temperature.
Thermal energy always flows from colder objects to warmer objects.
Energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.
"false", "thermal equilibrium", "Heat".Statement that is false from the options provided is:Thermal energy always flows from colder objects to warmer objects.What is thermal equilibrium?Thermal equilibrium is defined as the state of a system in which its temperature is uniform and unchanging over time. Heat is the transfer of thermal energy from one substance to another. Thermal energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.
Learn more about thermal equilibrium Energy here:
https://brainly.com/question/14132618
#SPJ4
in a ballistic pendulum experiment, projectile 1 results in a maximum height h of the pendulum equal to 2.6 cm. a second projectile (of the same mass) causes the pendulum to swing twice as high, . the second projectile was how many times faster than the first?
The second projectile was 2 times faster than the first projectile, as its initial velocity was twice that of the first projectile.
Let's assume that the first projectile had an initial velocity of v1, and the second projectile had an initial velocity of v2.
m1v1 = (m1 + m2)v2,
v1 = 2v2
This means that the initial velocity of the second projectile was twice that of the first projectile.
To find out the maximum height reached by the second projectile, we can use the conservation of energy:
1/2 m1 v2^2 = (m1 + m2)gh
h' = 2h = 5.2 cm
Substituting the values in the equation, we get:
1/2 m1 v2^2 = (m1 + m2)gh'
Simplifying, we get:
v2^2 = 2gh'
Substituting the values, we get:
v2^2 = 2 x 9.81 x 0.052
v2 = 0.725 m/s.
A projectile is an object that is propelled through the air and follows a curved trajectory under the influence of gravity. Examples of projectiles include bullets, cannonballs, and rockets. A projectile is typically launched with an initial velocity and then moves through the air under the influence of gravity alone.
The trajectory of a projectile is determined by its initial velocity, angle of launch, and the force of gravity. As the projectile travels through the air, it experiences a downward force due to gravity, which causes it to follow a curved path called a parabola. The maximum height of the projectile occurs at the apex of the parabolic path, where the vertical component of the velocity is zero.
To learn more about Projectile visit here:
brainly.com/question/11422992
#SPJ4
when really small pieces and fibers of paper are mixed in with sand and need to be removed, which separation process would probably work best?
The sieving would work best when really small pieces and fibers of paper are mixed in with sand and need to be removed.
When really small pieces and fibers of paper are mixed in with sand and need to be removed, the separation process that would probably work best is sieving.What is sieving?Sieving is a physical separation process that separates solid particles based on their particle size.
This process can be used to separate a variety of materials, including powders, grains, and solids.Sieving is the process of separating materials based on their size.
A sieve is a device that consists of a mesh or net that is used to separate larger particles from smaller particles. When a mixture of particles is poured onto a sieve, the smaller particles fall through the mesh, while the larger particles remain on top of the mesh.
This process is used to remove impurities from a mixture and to separate materials with different particle sizes.
To learn more about : fibers
https://brainly.com/question/30614297
#SPJ11
an emf of 18.0 mv is induced in a 484-turn coil when the current is changing at the rate of 10.0 a/s. what is the magnetic flux through each turn of the coil at an instant when the current is 3.60 a? (enter the magnitude.)
The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.
The quantity of magnetic field traveling through a specific region or surface is measured by magnetic flux. It is described as the result of the area that the magnetic field travels through and its magnitude, where the area is perpendicular to the field's direction. The Weber is the magnetic flux SI unit (Wb)
Given that,
EMF = 18.0 mV = 0.018 V
N = 484 turns
(dΦ/dt) = 10.0 A/s
I = 3.60 A
The equation that relates the electromotive force (EMF) induced in a coil to the rate of change of magnetic flux is:
EMF = -N(dΦ/dt)
Rearranging the equation to solve for Φ:
Φ = -EMF/(N(d/dt))
= -(0.018 V)/(484(10.0 ))
= -3.72×10⁻⁶ Wb
The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.
To learn more about Magnetic flux, refer to:
https://brainly.com/question/29221352
#SPJ4
1. why does basket-ball motion show projectile motion, explain? what is acceleration in x and y direction during projectile motion? does final and initial velocity in x direction change during projectile motion, why or why not, explain?
The final velocity in the y direction will be greater than the initial velocity. This is why basketball players need to shoot the ball with enough initial velocity to overcome the effect of gravity and ensure that the ball reaches the basket.
Basketball motion shows projectile motion because when the ball is released, it travels through the air in a curved path due to the forces acting upon it. These forces include gravity and air resistance, which cause the ball to follow a parabolic trajectory. During projectile motion, there is an acceleration in the x direction of zero since there is no force acting on the ball in that direction. However, there is an acceleration in the y direction due to the force of gravity. This acceleration is always downward and is equal to 9.81 m/s^2.
The final and initial velocities in the x direction do not change during projectile motion since there is no acceleration in that direction. However, in the y direction, the initial velocity is not equal to the final velocity since the ball is constantly accelerating due to gravity.
To learn more about Velocity :
https://brainly.com/question/80295?source=archive
#SPJ11
all the stars observed from earth emit light that is shifted, to varying degrees, to longer wavelengths. how is this evidence used to support the big bang theory?
The discovery of redshifted light from stars and galaxies is an important piece of evidence in favor of the Big Bang hypothesis
Redshift is the observation that the light emitted by stars is moved to longer wavelengths. The reason for this phenomenon is that as the cosmos expands, light's wavelength gets stretched out, giving it the appearance of being "redder". The universe should be expanding, and as a result, the light from far-off objects in the cosmos should be redshifted, according to one of the main predictions of the Big Bang hypothesis.
Many studies of far-off galaxies, stars, and other celestial objects have supported this hypothesis. As a result, the discovery of redshifted light from stars and galaxies is an important piece of evidence in favor of the Big Bang hypothesis, offering strong confirmation of one of its most fundamental predictions.
To learn more about redshift light, refer to:
https://brainly.com/question/2289242
#SPJ4
What is the force between a 0.004 C charge and a -0.02 C charge separated by a distance of 6 m
We can solve this problem applying "Coulomb's Law" which states-
[tex]\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{F_{(air)} = K\times \dfrac{ q_1 q_2}{r^2}} \\ [/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\star\:\sf\underline{F_{(air)} = \dfrac{1}{4\pi \epsilon_{0} } \dfrac{q_1q_2}{r^2} }\\ [/tex]
Where-
q₁ and q₂ are the two cahrges.r is the distance between the charges.[tex]\sf \epsilon_{0} [/tex] is the permittivity of free space.K is the Coulomb's Constant.k = 9×10⁹ Nm²/C²As per question, we are given that -
q₁= 0.004Cq₂= -0.02 CDistance,r = 6 mNow that required values are given, so we can substitute the values into the formula and solve for Force -
[tex] \:\:\:\:\:\:\:\:\:\:\star\:\sf\underline{F_{(air)} = \dfrac{1}{4\pi \epsilon_{0} } \dfrac{q_1q_2}{r^2} }\\ [/tex]
[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)}= 9\times 10^9 \times \dfrac{0.004\times -0.02 }{(6)^2}\\ [/tex]
[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)}= -9\times 10^9 \times\dfrac{0.00008}{36}\\ [/tex]
[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)} = -9\times 10^9 \times 2.2\times 10^{-6}\\ [/tex]
[tex] \:\:\:\:\:\:\:\longrightarrow \sf \underline{Force_{(air)} = -19800\:N}\\ [/tex]
Therefore, the force between two charges is -19800 N.2 people r pulling a box on ice. ice offers no resistance. person 2 pulls with force of 100. what is the force person 1 must be pulling with?
Since the box is not accelerating in any direction, Person 1 must be pulling with a force of 100 N in the opposite direction.
What is the force person 2 pulls with?Since the box is not accelerating in any direction, the sum of the forces in each direction must be zero.
In the x-direction, there are no forces since the ice offers no resistance. In the y-direction, the forces balance out.
Let F1 be the force that person 1 is pulling with.
F1(sin 90) + 100(sin 90) = 0
F1 = 0 - 100(1)
F1 = -100 N
Learn more about forces at: https://brainly.com/question/12970081
#SPJ1
wavelength.
24. The diagram shows a simplified energy level diagram for
an atom. The arrows represent three electron transitions
between energy levels. For each transition:
a) Calculate the energy of the emitted or absorbed
photon.
b) Calculate the frequency and wavelength of the
emitted or absorbed photon.
c) State whether the transition contributes to an
emission or an absorption spectrum.
04
-22
39
7.8
Transition 1 contributes to an absorption spectrum, while transitions 2 and 3 contribute to an emission spectrum.
How are the energy of the emitted or absorbed photon and frequency related?The energy of the emitted or absorbed photon is directly proportional to the frequency of the photon, as given by the equation E = hf.
What distinguishes an absorption spectrum from an emission spectrum?An emission spectrum is produced when an atom emits light, while an absorption spectrum is produced when an atom absorbs light. In an emission spectrum, the wavelengths of light emitted by the atom are characteristic of the atom's energy levels, and appear as bright lines on a dark background.
In an absorption spectrum, the wavelengths of light absorbed by the atom are missing from a continuous spectrum, appearing as dark lines on a bright background.
To know more about spectrum,visit:
https://brainly.com/question/6836691
#SPJ1
a thermodynamic cycle using air as the working fluid is outlined below. the specific heats of air can be assumed constant throughout the cycle with values taken at the initial conditions. the four processes that make up the cycle are:
A thermodynamic cycle using air as the working fluid consists of four processes. These four processes make up the complete thermodynamic cycle, with air as the working fluid.
The cycle is designed to convert heat into work and is an essential part of many practical applications, such as heat engines and refrigeration systems. These processes are:
1. Isentropic compression: In this process, the air is compressed adiabatically (without heat transfer) and reversibly. The temperature and pressure of the air increase during this process, and the entropy remains constant.
2. Constant-pressure heat addition: During this process, heat is added to the air at a constant pressure, causing the temperature and specific volume of the air to increase. The air expands during this process, and work is done by the air on its surroundings.
3. Isentropic expansion: In this process, the air expands adiabatically and reversibly, which means that there is no heat transfer, and the entropy remains constant. The temperature and pressure of the air decrease during this process and work are done by the air on its surroundings.
4. Constant-volume heat rejection: Finally, in this process, heat is removed from the air at a constant volume, causing the temperature and pressure of the air to decrease. The specific volume remains constant during this process.
to know more about thermodynamic cycle refer here:
https://brainly.com/question/30630564#
#SPJ11
gizmo warm-up the fan cart physics gizmo shows a common teaching tool called a fan cart. place fan a on the cart and turn it on by clicking the on/off button below. look at the blue lines coming from the fan. in which direction is the air pushed?
The cart is pushed to the right by the fans' forcefully pushing air to the left. This exemplifies Newton's third rule, which states that any force acting in one direction will also act in the opposite direction.
So in this case, the air is pushed towards the back of the cart. The direction of the air flow produced by the fan is depicted by the blue lines emanating from the fan in the Fan Cart Physics Gizmo.
The course or path that someone or something travels is referred to as their direction. It can relate to a physical movement, such as moving in the direction of someone or something, or it can refer to a person or an organisation's path of activity or decisions. Because it provides actions and choices focus and direction, direction is necessary for accomplishing goals and objectives.
Setting out a clear vision and goals for an organization, as well as offering instructions on how to attain them, is known as direction. Strong communication abilities, the capacity to inspire and encourage people, and a thorough knowledge of the organisation's advantages and disadvantages are necessary for effective directing. The instructions given to someone for a task or effort are referred to as providing "direction."
To learn more about Direction visit here:
brainly.com/question/30175826
#SPJ4
calculate the tension in a horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface.
The tension in the horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface is 7.5 N.
When calculating the tension in a horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface, there are various concepts to understand. Below are the steps to solve the given problem:
Step 1: Draw a free body diagram of the toy attached to the horizontal string. When an object is moving in a circular path, there must be a force acting on the object to make it move in a circle. In this case, the horizontal string exerts a force on the toy.
Step 2: Write down the formula for the force required to move an object in a circular path. The formula is given as F = m(v^2/r), where F is the force required, m is the mass of the object, v is the velocity of the object, and r is the radius of the circle.
Step 3: Substitute the given values in the above formula.
The mass of the toy is 2.0 kg, its velocity is 3.2 m/s, and the radius of the circle is 2.7 m.
F = (2.0 kg)(3.2 m/s)^2 / 2.7 m
= 7.5 N.
The tension in the horizontal string is 7.5 N.
To learn more about : tension
https://brainly.com/question/24994188
#SPJ11
The weather map shows some conditions in the
atmosphere at noon on a particular day.
1016
1020
1024
H
1008
1004
1000
996
1012 1008 1008 1012 1016
1016-
Where would you predict the highest atmospheric
pressure?
A. In the southeast
OB. In the northeast
OC. In the southwest
12
Northwest
The weather map shows some conditions in the atmosphere at noon on a particular day OB. In the northeast
Where do you think the highest atmospheric pressure will be found?
The atmospheric pressure is strongest at sea level and lowers as you ascend into the atmosphere. At sea level, typical air pressure ranges from 800 to 1050 millibars.
High-pressure regions are often areas of fair, stable weather. Low-pressure zones have a thin atmosphere. Winds sweep inward towards these regions. This causes the air to ascend, resulting in clouds and condensation.
Since warm air rises, areas with warmer air frequently have lower pressure. They are known as low pressure systems. High pressure systems are areas with high air pressure.
learn more about atmospheric pressure
https://brainly.com/question/15215203
#SPJ1
when pressure checking a rebreathing circuit, why is it important to keep your thumb over the end of the hose until the pressure is fully released from the system?
When pressure checking a rebreathing circuit, it is important to keep your thumb over the end of the hose until the pressure is fully released from the system to prevent a hazardous situation.
Rebreathing circuits are used in anesthesia delivery systems to recirculate exhaled gases containing anesthetic agents and oxygen.
The following steps should be taken in pressure checking a rebreathing circuit:
Ensure that the oxygen flush valve is in the closed position and the ventilator is not connected to the circuit. Plug one end of the circuit, hold the circuit in the palm of your hand and squeeze the bag to create positive pressure. Observe the bag for any collapse, and at the same time, listen for any hissing sound indicating leakage or a leak.
If a leak is detected, remove the circuit from service, and troubleshoot the issue by tracing the leak through the system using a leak tester, a tool that detects leaks in the system's various components.
When the pressure check is finished, it is important to keep your thumb over the end of the hose until the pressure is fully released from the system because if the pressure is released without doing so, the hose could whip around due to the pressure released, leading to a hazardous situation.
For more such questions on circuit, click on:
https://brainly.com/question/2969220
#SPJ11
a spring whose stiffness is 910 n/m has a relaxed length of 0.53 m. if the length of the spring changes from 0.21 m to 0.76 m, what is the change in the potential energy of the spring?
The potential energy change of the spring when its length changes from 0.21 m to 0.76 m is 0.000182 J The change in the potential energy of a spring whose stiffness is 910 N/m and has a relaxed length of 0.53 m .
when its length changes from 0.21 m to 0.76 m is 3.37 J.Explanation:Potential energy (PE) of a spring is given by;PE = 1/2 kx²Where k is the spring constant/stiffness and x is the displacement from the equilibrium position of the spring.In this question, the spring's stiffness is given as 910 N/m and its relaxed length is 0.53 m. To find the change in potential energy of the spring when the length of the spring changes from 0.21 m to 0.76 m, we first need to find the displacement (x).The change in length is given as;∆x = 0.76 m - 0.21 m= 0.55 mThe displacement (x) is therefore;x = ∆x - l₀= 0.55 m - 0.53 m= 0.02 mThe spring's stiffness is given as 910 N/m. Therefore, the potential energy change of the spring is given as;PE = 1/2 kx²PE = 1/2 x 910 N/m x (0.02 m)²PE = 0.455 x 0.0004PE = 0.000182 JThe potential energy change of the spring when its length changes from 0.21 m to 0.76 m is 0.000182 J (rounded off to three significant figures).
learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ4
an ice sailcraft is stalled on a frozen lake on a windless day. the skipper sets up a fan as shown. if all the wind bounces backward from the sail, will the craft be set in motion? if so, in what direction?
In an ice sailcraft that is stalled on a frozen lake on a windless day, if all the wind bounces backward from the sail, the craft will not be set in motion.
This is because the direction of the wind would be the same as that of the sail, resulting in a situation where the sail will not be able to catch any wind.
If all of the wind bounces backward off the sail in the given situation, there will be no force exerted on the sail to cause motion. The fan may cause some air movement, but the sailcraft would stay immobile if there was no wind to give lift.
Therefore, the craft will not move in any direction.
For more such questions on sailcraft, click on:
https://brainly.com/question/13731400
#SPJ11
a horizontal disk of radius 0.2m and mass 0.3kg is mounted on a central vertical axle so that a student can study the relationship between net torque and change in angular momentum of the disk. in the experiment, the student uses a force probe to collect data pertaining to the net torque exerted on the edge of the disk as a function of time, as shown in the graph. the disk is initially at rest. at what instant in time does the disk have the greatest angular momentum?
the disk has the greatest angular momentum at the end of the 2 seconds, when the net torque becomes constant.
To determine the instant in time when the disk has the greatest angular momentum, we need to use the relationship between torque and angular momentum:
τ = dL/dt
where τ is the net torque, L is the angular momentum, and t is time.
We can see from the graph that the net torque on the disk increases linearly with time for the first 2 seconds and then remains constant at 0.6 Nm. Since the disk is initially at rest, its initial angular momentum is zero.
During the first 2 seconds, the angular momentum of the disk increases as a result of the torque acting on it. We can integrate the torque over time to find the change in angular momentum:
ΔL = ∫τ dt = ∫(0.2t) dt = 0.1[tex]t^2[/tex]
So, at any time t during the first 2 seconds, the angular momentum of the disk is given by:
L = 0.1[tex]t^2[/tex]
The angular momentum of the disk will be greatest at the end of the 2 seconds, when the torque stops changing and reaches its constant value of 0.6 Nm. At this point, the angular momentum will be:
L = 0.1[tex](2)^2[/tex] = 0.4 kg [tex]m^2[/tex]/s
Learn more about angular momentum here:
https://brainly.com/question/29897173
#SPJ1
What is the impulse of a 20 kg car that is traveling 30 m/s, hitting an another car and slowing down to 10 m/s? How long did it take the car to stop if it had an applied force of 200N acting on it?
To find the impulse of the car, we can use the formula:
impulse = force x time
We know the mass of the car is 20 kg, and the change in velocity is 30 m/s - 10 m/s = 20 m/s. We can use the impulse-momentum theorem, which states that impulse equals the change in momentum:
impulse = change in momentum = mass x change in velocity
So, impulse = 20 kg x 20 m/s = 400 Ns
To find the time it took the car to stop, we can rearrange the impulse formula to solve for time:
time = impulse / force
Plugging in the values, we get:
time = 400 Ns / 200 N = 2 seconds
Therefore, the impulse of the car was 400 Ns, and it took 2 seconds for the car to stop with an applied force of 200N.
A member of the mafia died a quick and sudden death at a restaurant. His family
suspects that it was a poisoning. What should a forensic toxicologist request to check
right away?
O the color of the lips, to rule out arsenic
O the gastric contents because there may still be undigested pills
O the heart rate, to confirm the death
O the color of the feet, to rule out carbon monoxide poisoning
Answer: The forensic toxicologist should request to check the gastric contents because there may still be undigested pills which can help identify the poison used in the poisoning.
Explanation:
a roller coaster starts at rest from the top of a hill, coasts down, and then does a loop-the-loop of radius 20 m m . if the riders should feel weightless just at the top of the loop, at what height should the hill be? ignore friction.
The hill must be at least 30 meters high for the riders to experience weightlessness at the top of the loop.
Let h be the height of the hill, and let v be the velocity of the roller coaster at the top of the loop. At the top of the loop, the gravitational force and the normal force add up to zero:
mg + N = 0
where m is the mass of the roller coaster, g is the acceleration due to gravity, and N is the normal force.
The centripetal force required to keep the roller coaster moving in a circle of radius R is, Fc = mv²/R, where Fc is the centripetal force.
At the top of the loop, the centripetal force is equal to the weight of the roller coaster, Fc = mg
Setting these two expressions for Fc equal to each other,
mv²/R = mg
Solving for v,
v = sqrt(gR)
Substituting this expression for v into the conservation of energy equation, mgh = (1/2)mv² + mgR, where h is the height of the hill.
Substituting the expression for v,
mgh = (1/2)mgR + mgR
Solving for h,
h = 3R/2
Substituting the given value of R = 20 m, h = 30 m.
To know more about roller coaster, here
brainly.com/question/29307406
#SPJ4
helpp on edg! 100 POINTS!
Directions
Now that the lab is complete, it is time to write your lab report. The purpose of this guide is to help you write a clear and concise report that summarizes the lab you have just completed.
The lab report is composed of two sections:
Section I: Overview of Investigation
Provide background information.
Summarize the procedure.
Section II: Observations and Conclusions
Include any charts, tables, or drawings required by your teacher.
Include answers to follow-up questions.
Explain how the investigation could be improved.
To help you write your lab report, you will first answer the four questions listed below based on the lab that you have just completed. Then you will use the answers to these questions to write the lab report that you will turn in to your teacher.
You can upload your completed report with the upload tool in formats such as OpenOffice.org, Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Overview of Lab
What is the purpose of the lab?
The Purpose of the lab is to displace water to determine volume. And weigh objects to get mass. Then we would divide the two and get density.
What procedure did you use to complete the lab?
Outline the steps of the procedure in full sentences.
The procedures I used for lab are
1. One should have the knowledge of loab assignments to make the lab experiment easier
2. To be aware about safety equipment and their uses in lab, like-the location of fire extinguisher in lab.
3. To know the steps of experiments to be prepared.
4. To write notes on a notebook of lab with information regarding the experiment
5. One should review the data sheets of chemicals material safety.
6. To put on all the necessary dressing to peform experiment.
7. To have compelete understanding aout the experiment.
And that's all.
Section II: Observations and Conclusions
What charts, tables, or drawings would clearly show what you have learned in this lab?
Each chart, table, or drawing should have the following items:
An appropriate title
Appropriate labels
I have learned to center on the page, number in the order they appear in the text, reference in the order they appear in the text, label with the table number and descriptive title above the table, label with column and row labels that describe the data, and include units of measurement.
If you could repeat the lab and make it better, what would you do differently and why?
There are always ways that labs can be improved. Now that you are a veteran of this lab and have experience with the procedure, offer some advice to the next scientist about what you suggest and why. Your answer should be at least two to three sentences in length.
If I could repeat lab and make it better I would have optimized the space for lab equiment, label places to put minor equiment, have drawers under the lab counter, and train new researchers before they use the reactives and the lab equipment.
Writing the Lab Report
Now you will use your answers from the four questions above to write your lab report. Follow the directions below.
Section I: Overview of Lab
Use your answers from questions 1 and 2 (above) as the basis for the first section of your lab report. This section provides your reader with background information about why you conducted this lab and how it was completed. It should be one to two paragraphs in length.
Section II: Observations and Conclusions
Use your answers from questions 3 and 4 (above) as the basis for the second section of your lab report. This section provides your reader with charts, tables, or drawings from the lab. You also need to incorporate your answers to the follow-up questions (from the Student Guide) in your conclusions.
Overall
When complete, the lab report should be read as a coherent whole. Make sure you connect different pieces with relevant transitions. Review for proper grammar, spelling, punctuation, formatting, and other conventions of organization and good writing.
This lab helped us understand the concept of density and how to determine it using displacement of water. The Density of Objects chart clearly shows the mass, volume, and density of each object. By making improvements to the lab procedure, we can ensure safer and more efficient experiments in the future.
How did we arrive at this assertion?Lab Report: Displacement and Density Experiment
Section I: Overview of Investigation
The purpose of this lab was to determine the density of various objects using displacement of water. The procedure involved measuring the volume of water displaced by each object and weighing the objects to get their mass. By dividing mass by volume, we calculated the density of each object.
To complete the lab, we followed a set of steps. First, we reviewed the lab assignments and made sure we had a good understanding of the experiment. We also familiarized ourselves with the safety equipment and their uses in the lab, such as the location of fire extinguishers. Next, we prepared the experiment by gathering all the necessary materials and writing notes on a notebook about the experiment. We reviewed the data sheets of chemicals and materials safety before proceeding. Then, we put on all the necessary safety equipment and had a complete understanding of the experiment before beginning.
Section II: Observations and Conclusions
To show what we learned in this lab, we created a chart titled "Density of Objects." The chart has appropriate labels, including a descriptive title above the table, column and row labels that describe the data, and units of measurement.
Density of Objects
Object | Mass (g) | Volume (mL) | Density (g/mL)
Object 1 | 25.0 | 10.0 | 2.50
Object 2 | 14.5 | 5.0 | 2.90
Object 3 | 32.0 | 15.0 | 2.13
Based on our observations, we concluded that the density of each object was different. Object 2 had the highest density, while Object 3 had the lowest density. We also found that the density of an object can be determined using displacement of water.
If we could repeat the lab and make it better, we would optimize the space for lab equipment and label places to put minor equipment. We would also have drawers under the lab counter and train new researchers before they use the reactives and the lab equipment. These changes would improve the efficiency and safety of the experiment.
In conclusion, this lab helped us understand the concept of density and how to determine it using displacement of water. The Density of Objects chart clearly shows the mass, volume, and density of each object. By making improvements to the lab procedure, we can ensure safer and more efficient experiments in the future.
learn more about lab report: https://brainly.com/question/29500102
#SPJ1
there have been baseball seasons in which so many home runs were hit that people began to suspect that something was wrong with the baseballs. what change in the baseballs would account for them traveling farther than normal?
Changes in the core, seams, or surface of a baseball could make it travel farther than normal, leading to suspicions of foul play. However, any alterations to baseballs are closely monitored and must be approved by Major League Baseball to ensure fairness in the game.
There are a few changes that could potentially lead to baseballs traveling farther than normal:
Changes in the baseball's core: The core of a baseball is made up of rubber and cork, and a change in the density of these materials could potentially make the ball travel farther.
Changes in the baseball's seams: The seams on a baseball can affect its flight path, and a change in the height, width, or thickness of the seams could affect the ball's trajectory and make it travel farther.
Changes in the baseball's surface: The surface of a baseball can affect its aerodynamics, and a change in the texture or smoothness of the surface could potentially make the ball travel farther.
It's worth noting that changes in the baseballs are closely monitored by Major League Baseball, and any alterations must be approved by the league before they can be used in games. If a change is suspected to be causing an increase in home runs, the league would investigate and take appropriate action to ensure that the game remains fair and balanced.
Learn more about Baseball :
https://brainly.com/question/29783871
#SPJ4
what are the magnitude and direction of the angular momentum abouf the center of the disk? ∣iM∣= ____. The string is pulled for 0.15 s . What are the magnitude and direction of the angular impulse r CMΔt
applied to the disk during this time?
∣Fcm∣Δt= ______.
There is no information given about the initial and final angular momenta, so the magnitude of the angular impulse cannot be determined.
When answering questions on Brainly, one should always strive to be factually accurate, professional, and friendly, as well as be concise and not provide extraneous amounts of detail. It is important to use relevant terms in the answer as well. Here is an example answer to the given student question:What are the magnitude and direction of the angular momentum about the center of the disk?
The formula for calculating the magnitude and direction of angular momentum is given by:L = Iωwhere L is the angular momentum, I is the moment of inertia of the object, and ω is the angular velocity of the object.In this case, the disk is rotating around its center, so the angular momentum will also be about the center of the disk. Since there are no external torques acting on the disk, the angular momentum will be conserved.
Therefore, we can use the formula:L1 = L2orI1ω1 = I2ω2since the moment of inertia of the disk remains constant. Thus, we can calculate the magnitude of the angular momentum about the center of the disk by using the initial and final angular velocities:∣iM∣= Iω= Iω0where ω0 is the initial angular velocity. However, there is no information given about the angular velocity, so the magnitude of the angular momentum cannot be determined.
The string is pulled for 0.15 s. What are the magnitude and direction of the angular impulse r CMΔt applied to the disk during this time?The formula for calculating the angular impulse is given by:rΔp = rΔLwhere r is the distance from the axis of rotation to the point of application of the force, Δp is the linear impulse, and ΔL is the change in angular momentum.In this case, the force is applied to the edge of the disk, so the distance r is equal to the radius of the disk.
Since the force is applied for 0.15 s, we can calculate the linear impulse as:Δp = FΔtwhere F is the force applied to the edge of the disk. However, there is no information given about the force, so the linear impulse cannot be determined.Since there is no external torque acting on the disk, the angular impulse will be equal to the change in angular momentum:∣Fcm∣Δt= ΔLTherefore, the magnitude of the angular impulse is equal to the change in angular momentum.
To learn more about : angular
https://brainly.com/question/13014974
#SPJ11
a certain kind of lightbulb carries 1.0 ampere of current when connected to a 120 volt ac circuit. what is its power rating?
The power rating of a certain kind of lightbulb carrying 1.0 ampere of current when connected to a 120 volt AC circuit is 120 watts.
How to calculate the power rating of a lightbulb?The power rating of a lightbulb can be calculated using the formula:Power = Current × VoltageP = I × Vwhere P is the power in watts, I is the current in amperes, and V is the voltage in volts.Given,I = 1.0 ampereV = 120 voltsSubstitute the given values into the formula:P = I × VP = 1.0 A × 120 VP = 120 WTherefore, the power rating of the lightbulb is 120 watts. The power rating of the lightbulb can be calculated using the formula P = IV, where P is the power, I is the current, and V is the voltage. In this case, the current (I) is 1.0 ampere and the voltage (V) is 120 volts. Therefore, the power rating (P) of the lightbulb is: P = (1.0 A) × (120 V) = 120 watts
learn more about current here:
https://brainly.com/question/13076734
#SPJ4
a brand new american airlines boeing 787 is about to take off from rest on a calm day. the aircraft has a loaded mass of 251,000 kg. it has two engines, each of which provides 321 kn of thrust. the aircraft must achieve a minimum speed of 66.8 m/s to take off. what is the shortest length runway that will be needed for the aircraft to take off.
The shortest length of the runway that will be needed for the American Airlines Boeing 787 to take off is 902 meters.
To determine the shortest length runway needed for the American Airlines Boeing 787 to take off, we can use the formula for acceleration:
a = F_net / m
where a is the acceleration, F_net is the net force, and m is the mass of the aircraft.
We know that each engine provides 321 kN of thrust, and there are two engines, so the net force is:
F_net = 2 * 321 kN = 642 kN
We can convert this to Newtons:
F_net = 642,000 N
We also know the mass of the aircraft:
m = 251,000 kg
Substituting these values into the formula for acceleration, we get:
a = F_net / m = 642,000 N / 251,000 kg
= 2.56 m/s^2
To determine the minimum runway length needed, we can use the formula for distance:
d = (v_f^2 - v_i^2) / (2 * a)
where d is the distance, v_f is the final velocity (takeoff speed), and v_i is the initial velocity (zero).
Substituting the values we know, we get:
d = (66.8 m/s)^2 / (2 * 2.56 m/s^2)
= 902 meters
To learn more about Airlines Boeing
https://brainly.com/question/14956599
#SPJ4
a -kg bucket is attached to a cylindrical, massive pulley with a radius of m. the bucket starts from rest and falls for s into a well. the tension in the rope is n. what is the magnitude of the linear acceleration of the falling bucket?
The magnitude of the linear acceleration of the falling bucket is 9.8 m/s^2. The magnitude of the linear acceleration of the falling bucket is equal to the acceleration due to gravity, which is 9.8 m/s^2.
A bucket with a mass of a kg is attached to a cylindrical, massive pulley with a radius of b m. The bucket starts from rest and falls for c s into a well. The tension in the rope is d N. To find the magnitude of the linear acceleration of the falling bucket, we can use the following equation:
F_net = ma
Where F_net is the net force acting on the bucket, m is the mass of the bucket, and a is the acceleration of the bucket.
We can find the net force acting on the bucket using the tension in the rope: F_net = T - mg, where T is the tension in the rope, and mg is the weight of the bucket. Since the bucket is falling, we know that a = -g (where g is the acceleration due to gravity, which is a constant -9.8 m/s^2). So we can set up the following equation: T - mg = maT - mg = m(-g)T = mg - mgT = m(-g)T = -mg
Know more about linear acceleration here:
https://brainly.com/question/13723307
#SPJ11
consider a rlc circuit that consists of a 1 kw resistor in series with a 7 mf capacitor and a 130 mh inductor. a) what is the frequency that results in the maximum current passing through the circuit?
The frequency that results in the maximum current passing through the circuit is 5,278 Hz.
The resonance frequency of a series RLC circuit is given by:
f = 1 / (2π√(LC))
f = 1 / (2π√(LC))
f = 1 / (2π√(130 x [tex]10^{-3}[/tex] x 7 x [tex]10^{-6}[/tex]))
f = 1 / (2π√(0.910 x [tex]10^{-9}[/tex]))
f = 1 / (2π x 0.00003018)
f = 5,278 Hz
An RLC circuit is an electrical circuit that consists of a resistor (R), an inductor (L), and a capacitor (C) connected in series or parallel. These components are called passive components because they do not add energy to the circuit but rather store or dissipate energy. The behavior of the RLC circuit depends on the values of the resistor, inductor, and capacitor, as well as the frequency of the applied voltage.
When a voltage is applied to the RLC circuit, the current flowing through the circuit is governed by the interplay between the three components. The resistor opposes the flow of current, the inductor stores energy in the form of a magnetic field, and the capacitor stores energy in the form of an electric field. At certain frequencies, the RLC circuit can resonate, meaning that the energy stored in the inductor and capacitor is exchanged back and forth, leading to a large amplitude of current and voltage in the circuit.
To know more about RLC circuit visit here:
brainly.com/question/13092725
#SPJ4