Compute the number of 12 letter combination of the 26 letters in alphabet.

key answer:
9,675,700​

The area of the facade measuring 30' across and 20' in height is 300 square feet.

The front facade of an A-frame house is a triangular shape, with a base of 30 feet and a height of 20 feet. To calculate the area of the facade, we need to use the formula for the area of a triangle, which is 1/2 times the base times the height = 1/2 * b * h, where b is the base and h is the height.

In this case, the base is 30 feet and the height is 20 feet, so we can plug those values into the formula:

Area = 1/2 x 30 x 20

Simplifying the multiplication, we get:

Area = 300 square feet

Therefore, the area of the front facade of the A-frame house is 300 square feet.

To learn more about Area : https://brainly.com/question/25292087

#SPJ11

The value of x that maximizes the volume of the box is x=11 cm.

Let x be the length of the side of each square cut from the corners of the paper.

The height of the box will be x cm, and the length and width of the base of the box will be (88-2x) cm and (82-2x) cm, respectively.

The volume of the box is given by V(x) = x(88-2x)(82-2x).

Expanding this expression and simplifying, we get V(x) = 4x^3 - 340x^2 + 7040x.

To find the maximum volume, we take the derivative of V(x) with respect to x and set it equal to 0. We get dV/dx = 12x^2 - 680x + 7040 = 0.

Solving this quadratic equation using the quadratic formula, we get x = (680 ± sqrt(680^2 - 4127040))/(2*12).

Simplifying this expression, we get x = (680 ± 120)/24.

Therefore, the two possible values of x are x = 25/3 cm and x = 11 cm.

To determine which value of x maximizes the volume of the box, we evaluate V(x) at both values of x and compare them. We find that V(25/3) ≈ 5757.04 cm^3 and V(11) = 5808 cm^3.

Therefore, the value of x that maximizes the volume of the box is x = 11 cm.

For more questions like Equation click the link below:

https://brainly.com/question/29657983

#SPJ11

The greatest of the three interior angles in the triangle is approximately 71.2 degrees.

To find out which of the three interior angles in the triangle is the greatest, we can use the fact that the largest angle is opposite the longest side. So, in this case, the longest side is 22, which means that the angle opposite it must be the greatest. We can use the Law of Cosines to find the measure of this angle:

c^2 = a^2 + b^2 - 2ab*cos(C)

where c is the length of the side opposite angle C, and a and b are the lengths of the other two sides. Plugging in the values we know, we get:

22^2 = 12^2 + 17^2 - 2*12*17*cos(C)

484 = 144 + 289 - 408*cos(C)

51 = 408*cos(C)

cos(C) = 51/408

C = cos^-1(51/408)

C ≈ 71.2 degrees

So the greatest of the three interior angles in the triangle is approximately 71.2 degrees.

To know more about angles refer here

https://brainly.com/question/28451077#

#SPJ11

7 is the slope of BD in Quadrilateral.

What in arithmetic is a quadrilateral?

Four sides, four vertices, and four angles make up a quadrilateral, which is a two-dimensional form. Concave and convex are the two most common forms. Additionally, there are several subgroups of convex quadrilaterals, including trapezoids, parallelograms, rectangles, rhombus, and squares.

                                 There are four closed sides to a quadrilateral. Quadrilaterals are the following figures: produced by Raphael. a quadrilateral form. The form features a single pair of parallel sides and no right angles.

points A(4, 9) and C(3, 2)

      slope = y₂ - y₁/x₂ - x₁

                =  2 - 9/3 - 4

                = - 7/-1

                = 7

Learn more about Quadrilateral

brainly.com/question/29934440

#SPJ1

To find the volume of the solid generated by revolving the region bounded by the curve y=7secx and the line y=72 over the interval − π/4≤x≤π/4 about the​ x-axis, we can use the method of cylindrical shells.

First, we need to find the equation of the curve of the region being revolved. We have y=7secx and y=72, so at the intersection point, we have 7secx=72, which gives us secx=10.285. Taking the inverse secant function of both sides, we get x=1.37 (approximately).

Now, we can set up the integral for the volume using cylindrical shells. The radius of each shell is y-72, and the height of each shell is 2π times the distance from x to the intersection point, which is x-1.37. The integral is:

V = ∫(2π)(y-72)(x-1.37) dx, from -π/4 to π/4

We can substitute y=7secx into the integral:

V = ∫(2π)(7secx-72)(x-1.37) dx, from -π/4 to π/4

Using integration by parts, we can evaluate the integral:

V = (2π)[(7/2)ln|secx+tanx| - 72x + (1.37)(7/2)ln|secx+tanx| + 46.8] from -π/4 to π/4

V = (2π)(7/2)(ln|11+6√3| + ln|11-6√3| + 1.37ln|11+6√3| + 1.37ln|11-6√3| - 144)

V ≈ 305.64 cubic units.

Therefore, the volume of the solid generated by revolving the region bounded by the curve y=7secx and the line y=72 over the interval − π/4≤x≤ π/4 about the​ x-axis is approximately 305.64 cubic units.
To find the volume of the solid generated by revolving the region bounded by the curve y=7sec(x) and the line y=72 over the interval -π/4≤x≤π/4 about the x-axis, you can use the disk method. The formula for the disk method is:

Volume = π * ∫[R(x)² - r(x)²] dx from a to b

In this case, R(x) represents the outer radius, which is given by y=72, and r(x) represents the inner radius, which is given by y=7sec(x). The limits of integration are a=-π/4 and b=π/4. Therefore, the volume can be calculated as:

Volume = π * ∫[72² - (7sec(x))²] dx from -π/4 to π/4

Now, evaluate the integral and multiply by π to find the volume of the solid.

Learn more about volume here: brainly.com/question/1578538

#SPJ11

The measure of the unknown arc is 76°

An arc is a smooth curve joining two endpoints. It can also be defined as a portion of a circle.

Arc angle relationship states that If two chords intersect inside a circle, then the measure of each angle is one-half the sum of the measures of the arcs intercepted by the angle and its vertical angle.

Therefore angle 30° = 1/2 ( x-61)

30 = 1/2( x -61)

15 = x -61

x = 15 + 61

x = 76°

therefore the measure of the unknown arc is 76°

learn more about arc angle relationship from

https://brainly.com/question/31704687

#SPJ1

To determin how many pint containers of chocolate milk Joey should buy, we need to know how much chocolate milk he wants in total.

Let's assume Joey wants to buy "x" pints of chocolate milk. Then, the total amount of chocolate milk he will get in quarts can be calculated as:

Total amount of chocolate milk = x pints/2 pints per quart = x/2 quarts

If Joey has a specific total amount of chocolate milk he wants to buy, we can solve for "x". For example, if Joey wants to buy 3 quarts of chocolate milk, we can set up the following equation:

x/2 = 3

Multiplying both sides by 2, we get:

x = 6

So, Joey needs to buy 6 pint containers of chocolate milk to get 3 quarts in total.

If Joey has a different desired amount of chocolate milk, we can adjust the equation accordingly to find the number of pint containers he needs to buy

To know more about Multiplying refer here

https://brainly.com/question/42663642#

#SPJ11

a. True, more than 5% of the children selected "other".

b. True, 15% of kids say that Lucky Charms is their favourite cereal.

c. As the cereal that the most students chose, Frosted Flakes, it is true that this is the most popular cereal.

d. Fruit Loops were picked half as frequently as Frosted Flakes.

Using Percentage calcuate number of children:

Total number of children = 15 + 10 + 2 + 20 + 3 = 50

a). 3 children chose other.

Percentage = 3/50 × 100

= 6%

So it's accurate to say that more than 5% of the kids selected "other".

b). 15 children chose "lucky charm".

Percentage = 15/50 × 100

= 30%.

So it is true that 15% of kids prefer Lucky Charms cereal.

c). Frosted Flakes are the cereal that the majority of pupils choose, so it is true that this is the case.

d). Ten kids all chose Fruit Loops.

Twenty kids chose Frosted Flakes.

As a result, Frosted Flakes were picked twice as often as Fruit Loops.

To know more about Percentage, visit:

brainly.com/question/24159063

#SPJ1

For the first equation, we can use the product rule. Let f(x) = 2x+ and g(x) = 5x+2. Then, f'(x) = 2 and g'(x) = 5. Using the product rule formula, we get:

k'(x) = f(x)g'(x) + g(x)f'(x)
k'(x) = (2x+)(5) + (5x+2)(2)
k'(x) = 10x+ + 4x+10

For the profit function, P(x) = -2x^2 + 6x + 7, we can use the derivative to find the marginal profit. The derivative of P(x) is:

P'(x) = -4x + 6

To find the marginal profit when 4 units are produced and sold, we plug in x = 4 into P'(x):

P'(4) = -4(4) + 6
P'(4) = -10

Therefore, the marginal profit when 4 units are produced and sold is -10 hundred dollars or -$1,000. This means that for each additional unit produced and sold beyond the initial 4 units, the profit will decrease by $1,000.
Hi! It seems that your question has some missing information and typos, but I'll try my best to help you with the given data. The main task here is to find the marginal profit when 4 units are produced and sold, and interpret the answer.

The profit function P(x) appears to be incomplete. However, since we're asked to find the marginal profit, we need to take the derivative of the profit function with respect to x. Marginal profit is the derivative of the profit function with respect to the number of units sold (x). We can use the chain rule, product rule, or quotient rule to find the derivative, depending on the given profit function.

Once we have the derivative, we can evaluate it at x = 4 to find the marginal profit when 4 units are produced and sold. The result will indicate how much additional profit (in hundreds of dollars) the company will gain for producing and selling one more unit.

Please provide the complete profit function P(x), and I will be glad to help you find the marginal profit and interpret the answer.

Learn more about derivatives here: brainly.com/question/29096174

#SPJ11

B has the least rate of increase, followed by A, and C has the greatest rate of increase.

We have,

The segments in order from the least to the greatest rate of increase in the water level are:

B, A, C.

Segment B has a constant rate of increase of 20 cm/min.

Segment A has a variable rate of increase that starts at 20 cm/min and decreases as the tank fills up.

Segment C has a variable rate of increase that starts at 20 cm/min and increases as the tank fills up.

Therefore,

B has the least rate of increase, followed by A, and C has the greatest rate of increase.

Learn more about the rate of increases here:

https://brainly.com/question/23776775

#SPJ1

The maximum diameter of the spheres Selim can purchase is approximately 1.78 feet, The correct answer is option (C).

To find the maximum diameter of the concrete spheres Selim can purchase, we need to consider the cost and surface area of the spheres. Given that the spheres cost $2 per square foot and Selim can spend $20 per sphere, we can start by finding the maximum surface area he can afford for each sphere.
1. Calculate the maximum surface area:
$20 ÷ $2 per square foot = 10 square feet
Now that we know the maximum surface area is 10 square feet, we can use the formula for the surface area of a sphere to find the maximum diameter.
2. Use the sphere surface area formula:
Surface area = 4πr², where r is the radius of the sphere.

Since the maximum surface area is 10 square feet, we can plug this value into the formula and solve for the radius.
10 = 4πr²
3. Divide both sides by 4π:
10 ÷ 4π = 0.796
4. Take the square root to find the radius:
r = 0.893 ft
5. Finally, multiply the radius by 2 to get the diameter:
D = 2 * 0.893 = 1.786 ft
Therefore, the maximum diameter of the spheres Selim can purchase is approximately 1.78 feet, which corresponds to option C.

To know more about sphere click here

brainly.com/question/30897173

#SPJ11

The observed relationship can be described as a negative correlation.

The basketball coach observes a decrease in points scored by his team over the first ten weeks of the season.

This indicates a negative correlation between time (progressing through the season) and points scored. Without seeing the data, we cannot determine if the coach's observation is correct or incorrect. However, the observed relationship can be described as a negative correlation.

However, it is important to note that without actually seeing the data and analyzing it, we cannot conclusively determine if the coach's observation is correct or incorrect.

The observed relationship, as described by the coach, suggests a negative correlation, but the strength and significance of this correlation would need to be evaluated through statistical analysis of the data.

In addition, it is also possible that other factors may be influencing the decrease in points scored, such as changes in team strategy, player injuries, or tougher opponents.

Without considering these other factors and analyzing the data, it would be premature to draw definitive conclusions about the relationship between time and points scored.

To learn more about strength, refer below:

https://brainly.com/question/9367718

#SPJ11

The length of GC is 22.5

Here we know that the triangles GHC and JKC are similar, we know that the corresponding angles are congruent.

That is, angle GHC is equal to angle JKC, angle HGC is equal to angle KJC, and angle CHG is equal to angle CKJ.

∠GHC = ∠JKC

∠HGC = ∠KJC

∠CHG = ∠CKJ

We can denote this as:

ΔGHC ~ Δ JKC

Using the concept of similarity, we can write the following proportion:

GC/ JK = HC/ KC

Here, GC represents the length of the corresponding side of triangle GHC, and JK represents the length of the corresponding side of triangle JKC. HC and KC represent the lengths of the other sides that are also proportional.

We can cross-multiply to get:

GC × KC = HC × JK

Now, we can substitute the values we know.

=> x * 20 = 18 x 25

=> x = 22.5

To know more about triangle here

https://brainly.com/question/8587906

#SPJ1

4(-2 - 4p) + 4(-2p - 1)

To simplify the expression {2(-2-4p)+2(-2p-1)}, we can distribute the coefficients and simplify the terms.

First, let's distribute the coefficient of 2 to the terms inside the first parentheses: 2 * -2 = -4 and 2 * -4p = -8p.

Next, distribute the coefficient of 2 to the terms inside the second parentheses: 2 * -2p = -4p and 2 * -1 = -2.

Now, we have:

{-4 - 8p + (-4p - 2)}

Next, combine like terms within the parentheses:

{-4 - 8p - 4p - 2}

Simplifying further:

{-6 - 12p}

Therefore, the simplified equivalent expression for {2(-2-4p)+2(-2p-1)} is -6 - 12p.

Learn more about expression

brainly.com/question/16804733

#SPJ11

it's important to carefully consider the assumptions and limitations of any statistical test or interval, and to ensure that they are appropriate for the data and research question at hand.

There are a few potential reasons why the procedure the student used may not be appropriate in this context:

1.Sample size: The accuracy of the t-distribution depends on the sample size and the assumption that the population follows a normal distribution. If the sample size is too small, the t-distribution may not provide an accurate estimate of the population parameters. In particular, a sample size of less than 30 is often considered too small for the t-distribution to be reliable.

2.Independence assumption: In order to use a t-test or t-interval, the samples should be independent. It's possible that some of the Italian and Spanish scientists may be related or have worked together, which could violate the independence assumption.

3.Population distributions: The validity of a t-test or t-interval also depends on the assumption that the populations have similar variances. If the variances are significantly different, this can affect the accuracy of the results.

4.Random sampling: In order for the results to be valid, the samples should be selected randomly from the populations of Italian and Spanish scientists. If the samples are not random, this could introduce bias into the results.

To know more about variances refer to

https://brainly.com/question/9304306

#SPJ11

The probability that a randomly selected student prefers the arts or does not prefer literature is 8/11.

There are different ways to approach this problem, but one possible method is to use the concept of complement events.

First, we can calculate the probability of a randomly selected student preferring the arts. This is simply the proportion of students in the sample who prefer the arts, which is 9 out of 3+9+10 = 22. So, the probability is:

P(arts) = 9/22

Next, we can calculate the probability of a randomly selected student preferring literature. This is the proportion of students in the sample who prefer literature, which is 7+8 = 15 out of 22. So, the probability is:

P(literature) = 15/22

To find the probability of a student preferring the arts or not preferring literature, we can use the complement event that consists of students who do not prefer literature. This is the complement of the event "preferring literature", and its probability is:

P(not literature) = 1 - P(literature) = 1 - 15/22 = 7/22

Finally, we can use the addition rule for disjoint events (i.e., events that cannot occur at the same time) to calculate the probability of the event "preferring the arts or not preferring literature".

Since these events are not mutually exclusive (i.e., some students may prefer both the arts and literature), we need to subtract their intersection (i.e., students who prefer both) to avoid double-counting. Therefore, the probability is:

P(arts or not literature) = P(arts) + P(not literature) - P(arts and literature)

= 9/22 + 7/22 - 0

= 16/22

= 8/11

To learn more about probability click on,

https://brainly.com/question/24277936

#SPJ1

Answer:

3/5

Step-by-step explanation:

If it takes 15 minutes to complete one lap around the park, then the runner completes 1/15 of a lap in 1 minute.

To find out what fraction of a lap the runner completes in 9 minutes, we can multiply the fraction completed in 1 minute by the number of minutes elapsed:

Fraction completed in 9 minutes = (1/15) x 9 = 9/15 = 3/5

Therefore, the runner has completed 3/5 of a lap in 9 minutes

The 95% confidence interval for the U.S. Cesarean delivery rate for this year is approximately (0.3314, 0.4886) or 33.14% to 48.86%.

To estimate the U.S. Cesarean delivery rate for this year with 95% confidence using the provided information, we can construct a confidence interval for the population proportion.

Given:

Population proportion estimates from the NVS Report for 2011: p = 0.328 (32.8%)

Sample size: n = 100

Number of C-sections in the sample: x = 41

First, we need to check if a normal model is appropriate for the sample proportion. For this, we can verify if the sample size is sufficiently large and if both np and n(1-p) are greater than 10.

np = 100 * 0.328 = 32.8

n(1-p) = 100 * (1 - 0.328) ≈ 67.2

Since both np and n(1-p) are greater than 10, we can assume that the conditions for a normal model are met.

Now, we can calculate the confidence interval using the sample proportion and the critical value corresponding to a 95% confidence level.

Sample proportion (p-hat) = [tex]\frac{x }{ n}[/tex] =[tex]\frac{ 41 }{ 100 }[/tex]= 0.41

The critical value for a 95% confidence level can be obtained from a standard normal distribution or a Z-table. In this case, the critical value is approximately 1.96.

The margin of error (E) can be calculated as:

E = Z * [tex]\sqrt((\frac{p-hat * (1 - p-hat))} { n})[/tex]

E = 1.96 * [tex]\sqrt((\frac{0.41 * (1 - 0.41))}{ 100)}[/tex]

E ≈ 0.0786

Finally, we can construct the confidence interval by subtracting and adding the margin of error from the sample proportion.

Confidence interval = p-hat ± E

Confidence interval = 0.41 ± 0.0786

Therefore, the 95% confidence interval for the U.S. Cesarean delivery rate for this year is approximately (0.3314, 0.4886) or 33.14% to 48.86%.

Note: It's important to consider that this calculation assumes the sample is representative of the U.S. population and that the conditions for a normal model are satisfied. Additionally, the estimate from the NVS Report for 2011 is used as the population proportion.

Learn more about the delivery rate for this year.

brainly.com/question/11805232

#SPJ11

Answer:

Step-by-step explanation:

To find the highest common factor (HCF) of 12x^12 and 16x^16, we need to factor both expressions.

12x^12 = 2^2 * 3 * (x^2)^6

16x^16 = 2^4 * (x^2)^8

The common factors of 12x^12 and 16x^16 are 2^2 and (x^2)^6. To find the HCF, we take the product of these common factors:

HCF = 2^2 * (x^2)^6 = 4x^12

Therefore, the highest common factor (HCF) of 12x^12 and 16x^16 is 4x^12.

The answer of the given question based on the right triangular prism is , the surface area of the prism is,

(D) 2.6 + 12 + 8 + 8 = 30.

Since, A right triangular prism is a three-dimensional solid that has two congruent, parallel triangular faces (also known as bases) and three rectangular faces that connect the bases at right angles. The perpendicular distance between the two bases is called the height of the prism.

To find the surface area of the prism, we need to calculate the area of each of its faces and then add them up.

The prism has two congruent triangular faces and three rectangular faces.

The area of each triangular face is equal to one-half the product of the base and height, which gives:

1/2 x 3 x 12 = 18

The area of each rectangular face is equal to the product of its length and width, which gives:

8 x 3 = 24 (two of these faces)

12 x 8 = 96 (one of these faces)

Therefore, total surface area of  prism is given by:

2 x 18 + 2 x 24 + 96 = 60 + 96 = 156

So, the correct expression that represents the surface area of the prism is option,

(D) 2.6 + 12 + 8 + 8 = 30.

To know more about Congruent triangle visit:

brainly.com/question/30105547

#SPJ1

We can also pair 3 and 96, since 3 x 96 = 288. This means that the length of the rectangular prism could be 96 inches and the width could be 3 inches.

To find the dimensions of the rectangular prism, we can use the formula for the volume of a rectangular prism, which is:

V = l x w x h

where V is the volume, l is the length, w is the width, and h is the height.

We know that the volume of the box of tissues is 288 cubic inches. We want to find the length, width, and height.

We can start by listing all the factors of 288:

1, 2, 3, 4, 6, 8, 9, 12, 16, 18, 24, 32, 36, 48, 72, 96, 144, 288

We can see that some of these factors are repeated, so we can pair them up to find the dimensions of the rectangular prism.

For example, we can pair 2 and 144, since 2 x 144 = 288. This means that the length of the rectangular prism could be 144 inches and the width could be 2 inches.

We can also pair 3 and 96, since 3 x 96 = 288. This means that the length of the rectangular prism could be 96 inches and the width could be 3 inches.

We can continue pairing the factors until we find all the possible combinations. Once we have all the possible combinations, we can choose the one that makes the most sense based on the context of the problem (in this case, the dimensions of a box of tissues).

Learn more about volume

brainly.com/question/29868754

#SPJ11

The value of given function [tex]\int\limits^1_{-1}[/tex]f(x)dx is equal is 5/6. So, correct option is A.

To find the integral of f(x) from -1 to 1, we need to split the interval [-1,1] into three parts, where f(x) is defined differently.

For x < 0, f(x) = x², so the integral of f(x) from -1 to 0 is:

[tex]\int\limits^0_{-1}[/tex](x²)dx = (-1/3)x³ evaluated at x=0 and x=-1 = (-1/3)(0 - (-1)) = 1/3

For x = 0, f(x) = -1, so the integral of f(x) at x=0 is simply -1.

For x > 0, f(x) = x, so the integral of f(x) from 0 to 1 is:

[tex]\int\limits^1_{0}[/tex](x)dx = (1/2)x² evaluated at x=1 and x=0 = (1/2)(1 - 0)² = 1/2

Therefore, the integral of f(x) from -1 to 1 is:

[tex]\int\limits^1_{-1}[/tex]f(x)dx = [tex]\int\limits^0_{-1}[/tex](x²)dx  + [tex]\int\limits^0_{0}[/tex](-1)dx + [tex]\int\limits^1_{0}[/tex](x)dx

= 1/3 + (-1) + 1/2

= 5/6

Thus, the correct answer is (a) 5/6.

So, correct option is A.

To learn more about integral click on,

https://brainly.com/question/2254612

#SPJ1

As an illustration, at t = 0, we obtain the point (-1, -1, -1), and at t = 1, we obtain the point (8, -1, 6), which are the line's two endpoints.

A vector is a dimensionless parameter in mathematics that has both its magnitude as well as its direction. A vector can be visualised geometrically as an arrow, with the direction and length of the arrow denoting the magnitude and direction of the vector, respectively. A column can be formally described as a component of a feature space. A vector space is a group of things (referred to as vectors) that may be added to and multiplied by scalars, which are often real numbers, in a way that complies with specific axioms. Flow rates, forces, and fields of electricity and magnetism are only a few of the many different types of quantities that can be represented by vectors.

given

Using vector notation, we can write the following for the line that passes through the points (-1, -1, -1) and (8, -1, 6):

r = (-1, -1, -1) + t(9, 0, 7) (9, 0, 7)

The direction of the line is indicated by the vector (9, 0, 7), which is created by deducting the position vectors of the first and second points. We may generate every point along the line by changing the value of the parameter t.

As an illustration, at t = 0, we obtain the point (-1, -1, -1), and at t = 1, we obtain the point (8, -1, 6), which are the line's two endpoints.

We obtain various places on the line for varying values of t.

To know more about vector visit:

https://brainly.com/question/30202103

#SPJ1

There is an estimated probability of 0.875 (or 87.5%) that at least one of Esteban's kittens will still have blue eyes at three months old.

Let's use the complement rule to estimate the probability that at least one kitten will still have blue eyes at three months old:

P(at least one kitten with blue eyes) = 1 - P(no kitten with blue eyes)

To estimate P(no kitten with blue eyes), we can use the results of Esteban's simulation. We can see from the table that all three coins came up tails (representing no color change) in row 8, so that's one outcome where no kitten has blue eyes. There are a total of 2^3 = 8 possible outcomes, so the estimated probability of no kitten having blue eyes is:

P(no kitten with blue eyes) = 1/8 = 0.125

Therefore, the estimated probability that at least one kitten will still have blue eyes at three months old is:

P(at least one kitten with blue eyes) = 1 - P(no kitten with blue eyes) = 1 - 0.125 = 0.875

So, there is an estimated probability of 0.875 (or 87.5%) that at least one of Esteban's kittens will still have blue eyes at three months old.

To learn more about probability visit: https://brainly.com/question/30034780

#SPJ11

To find the image of point P(-2,-2) translated 1 unit to the left and 3 units down, we subtract 1 from the x-coordinate and 3 from the y-coordinate to get coordinates of P' as: (-3, -5).

To translate a point to the left, we subtract from its x-coordinate, and to translate it down, we subtract from its y-coordinate.

Therefore, to translate P(-2, -2) 1 unit to the left and 3 units down, we subtract 1 from the x-coordinate and 3 from the y-coordinate to get P'(-3, -5) as the image of P after translation.

Therefore, the coordinates of P' are (-3, -5).

Learn more about translation on:

https://brainly.com/question/12861087

#SPJ1

Complete Question:

Point P' is the image of P(-2,-2) translated by 1 unit to the left and 3 units down. What are the coordinates of P'?

The first and fourth sequences show a geometric series.

Consequently, the sequences 2, 3, 4.5, 6.75, … and 4, 8, 16, 32, … are the geometric series.

Learn more about geometric series:-

https://brainly.com/question/31472659

#SPJ4

Complete Question:-

Which of the following show a geometric series? select all that apply.

1) 2 3 4.5 6.75 …

2) 2 2.5 3 3.5 …

3) 6 7 9 12 …

4) 4 8 16 20 …

5) 8 4 2 1 …

Answer:

Step-by-step explanation:

The velocity at time t is 56 + 6 m/s, the velocity at time t = 3 seconds is 62 m/s, the acceleration at time t is 0 m/s², and the acceleration at time t = 3 seconds is 0 m/s².

Hi, I can help you with your question involving acceleration, time, and a particle.

(a) To find the velocity at time t (v(t)), take the first derivative of the position function f(t) = 56t + 6t + 9.

v(t) = d(56t + 6t + 9)/dt = 56 + 6

(b) To find the velocity at time t = 3 seconds, plug in t = 3 into the velocity function:

v(3) = 56 + 6 = 62 m/s

(c) To find the acceleration at time t (a(t)), take the first derivative of the velocity function v(t) = 56 + 6:

a(t) = d(56 + 6)/dt = 0

(d) To find the acceleration at time t = 3 seconds, since the acceleration is constant (a(t) = 0), it remains the same for all time:

a(3) = 0 m/s²

So, the velocity at time t is 56 + 6 m/s, the velocity at time t = 3 seconds is 62 m/s, the acceleration at time t is 0 m/s², and the acceleration at time t = 3 seconds is 0 m/s².

Learn more about velocity here:

brainly.com/question/29110878

#SPJ11

The amount of paper required to cover each memory box is 5220 square inches.

Considering the edge of the cube = L units.

Thus the area of one side of the cube will be equal to L² unit².

Now, there will be 6 such sides for a closed cube then the total surface area will be 6*(L)² unit²

The given length breadth and height of the box is 35in, 24in, and 30in.

The formula for the surface area of a rectangular prism is:

SA = 2(lw + lh + wh)

Where:

SA = surface area l = length w = width h = height

For this memory box, the given length (35 in), width (24 in), and height (30 in).

Substituting  these values into the formula the SA obtained will be:

SA = 2(35 × 24 + 35 × 30 + 24 × 30) SA

= 2(840 + 1050 + 720) SA

= 2(2610) SA = 5220inches²

Therefore, the answer will be 5220 square inches.

To learn more about the surface area of a cube click on:

https://brainly.com/question/26706156

#SPJ2