Answer:
The increasing monthly balance can be described by option B.
Step-by-step explanation:
The initial balance is $650.00, and with a compound interest rate of 1.8% per month, the balance increases slightly each month. This means that the balance will gradually grow, but at a decreasing rate over time. Therefore, the balance will be slightly higher each month, as shown in option B: 650.00, 650.18, 650.36, 650.54, 650.72, and so on.
A reaction has a rate constant of 0.360 min-¹ at 375 K and a rate constant of 0.915 min-¹ at 727 K. Calculate the activation energy of this reaction in kilojoules per mole (kJ/mol).
Ea = (8.314 / 1000) * (ln(0.360 / 0.915)) / (1 / (727 K) - 1 / (375 K))
Calculating the above expression will give us the activation energy in kilojoules per mole (kJ/mol).
To calculate the activation energy (Ea) of a reaction using the rate constants at different temperatures, we can use the Arrhenius equation:
k = A * e^(-Ea / (R * T))
Where:
k is the rate constant
A is the pre-exponential factor
Ea is the activation energy
R is the gas constant (8.314 J/(mol·K))
T is the temperature in Kelvin
Given:
k1 = 0.360 min^(-1) at 375 K
k2 = 0.915 min^(-1) at 727 K
Taking the natural logarithm of both sides of the Arrhenius equation, we have:
ln(k1) = ln(A) - (Ea / (R * T1))
ln(k2) = ln(A) - (Ea / (R * T2))
Subtracting the second equation from the first, we get:
ln(k1) - ln(k2) = (Ea / (R * T2)) - (Ea / (R * T1))
ln(k1/k2) = Ea / R * (1 / T2 - 1 / T1)
Now we can rearrange the equation to solve for Ea:
Ea = R * (ln(k1/k2)) / (1 / T2 - 1 / T1)
Converting the gas constant R to kJ/(mol·K), which is the desired unit for activation energy, by dividing by 1000, we have:
Ea = (8.314 J/(mol·K) / 1000) * (ln(k1/k2)) / (1 / T2 - 1 / T1)
Now, we can plug in the values and calculate the activation energy Ea:
Ea = (8.314 / 1000) * (ln(0.360 / 0.915)) / (1 / (727 K) - 1 / (375 K))
To know more about dividing visit:
brainly.com/question/15381501
#SPJ11
Directions: Solve the following problems using the GRADS-IDEA method and upload your scans or typed responses. 1. During the process of fermentation, glucose breaks down into ethanol and carbon dioxide. a. Write the balanced equation for this reaction. b. Using standard heat of formation values, calculate the heat of reaction if 20 mol of glucose are degraded in this reaction. C. Suppose the reaction does not go to completion. Calculate the heat of reaction if the fractional conversion of glucose is 0.7.
a. The balanced equation is C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂
b. Heat of reaction is -1378 KJ/mol.
c. Heat of reaction for reaction with conversion 0.7 is -964.6 KJ/mol.
Given that,
a. We have to find the balanced equation for this reaction.
The balance equation for fermentation of glucose is
C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂
Therefore, The balanced equation is C₆H₁₂O₆ ⇒ 2C₂H₅OH + 2CO₂
b. We have to calculate the heat of reaction if 20 mol of glucose are degraded in this reaction using standard heat of formation values.
Standard heat of formation of Glucose is 1273.3 KJ/mol
Standard heat of formation of Ethanol is 277.6 KJ/mol
Standard heat of formation of Carbon dioxide is 393.5 KJ/mol
Number of mole of glucose are 20 mole
Number of moles of ethanol formed in complete reaction is 2×20 = 40 mole
Number of moles of Carbon Dioxide formed in complete reaction is 2×20 = 40 mole
Heat of reaction = ΔH (products) – ΔH (reactants)
So,
Heat of products is 40 × (-277.6) + 40 × (-393.5) = -26,844 KJ/mol
Heat of reactants is 20 × (-1273.3)= -25,466 KJ/mol
Heat of reaction = -26,844 - (-25,466)= -1378 KJ/mol
Therefore, Heat of reaction is -1378 KJ/mol.
c. Let the reaction does not go to completion.
In the event where the fractional conversion of glucose is 0.7, we must determine the heat of reaction.
The fractional conversion of glucose is 0.7
Number of glucose that will react = 0.7 × 20 = 14 mole
So, only 14 mole of glucose will react. Rest 6 moles would not undergo reaction and there will not be considered.
Number of moles of ethanol formed = 2 × 14= 28 mole
Number of moles of carbon dioxide formed= 28 mole
Now calculation heat of reaction
Heat of products is 28 × (-277.6) + 28 × (-393.5) = -18790.8 KJ/mol
Heat of reactants is 14 × (-1273.3)= -17826.2 KJ/mol
Heat of reaction = -18790.8 - (-17826.2)= -964.6 KJ/mol
Therefore, Heat of reaction for reaction with conversion 0.7 is -964.6 KJ/mol.
To know more about reaction visit:
https://brainly.com/question/517776
#SPJ4
Suppose, a rose is 15 taka, a tuberose is 9 taka, and a marigold is 6 taka. John's father gives him 100 taka to buy each type of flower. John buys some flowers and tells his father that they cost exactly 100 taka. Determine whether John is lying or not. [Note: Fraction of a flower cannot be bought]
John is lying because he claimed he spent exactly 100 taka, but he only spent 45 taka, which is less than half of the 100 taka he was given.
Suppose, a rose is 15 taka, a tuberose is 9 taka, and a marigold is 6 taka. John's father gives him 100 taka to buy each type of flower. John buys some flowers and tells his father that they cost exactly 100 taka. Determine whether John is lying or not.
Fraction of a flower cannot be bought]John can buy only one of each type of flower, since fractions of a flower cannot be bought.
The cost of one rose is 15 taka, the cost of one tuberose is 9 taka, and the cost of one marigold is 6 taka.
John spent 30 taka on roses, 9 taka on tuberose, and 6 taka on marigold, for a total of 45 taka.
Since John claimed he spent exactly 100 taka and he spent only 45 taka, John is lying.
In this scenario, John is lying because he claimed he spent exactly 100 taka, but he only spent 45 taka, which is less than half of the 100 taka he was given.
To know more about taka visit:
https://brainly.com/question/12017701
#SPJ11
Let a sequence (an)n=1,2,3,… satisfy Then, for any n=1,2,3,…, an=(1)×(2)0^n+(3)×(4)(2)>(4).
We can conclude that for any given sequence (an)n=1,2,3,…, the values of the sequence lie in the closed interval [1,4]. For any n=1,2,3,…, an=(1)×(2)0^n+(3)×(4)(2)>(4) satisfies the inequality 1 ≤ an ≤ 4.
Let a sequence (an)n=1,2,3,… satisfy
Then, for any n=1,2,3,…, an=(1)×(2)0^n+(3)×(4)(2)>(4).
The formula for the given sequence is an=(1)×(2)0^n+(3)×(4)(2)>(4).
We can observe that an is a weighted average of the two numbers 2^0 = 1 and 4^1 = 4 i.e, an = (1/4) × (4) + (3/4) × (1)
An equivalent way to express this is an=(3/4)(1)+(1/4)(4)
Using the above representation, we can say that (an) is a convex combination of the numbers 1 and 4.
Hence, we can conclude that for any given sequence (an)n=1,2,3,…, the values of the sequence lie in the closed interval [1,4].
Therefore, for any n=1,2,3,…, an=(1)×(2)0^n+(3)×(4)(2)>(4) satisfies the inequality 1 ≤ an ≤ 4.
To know more about inequality visit:
https://brainly.com/question/20383699
#SPJ11
Question 2 If 15 m³/s of water flows down a spillway onto a horizontal floor of 3m wide and upstream depth of Im with a velocity of 5 m/s, determine: i. The downstream depth required to cause a hydraulic jump. ii. Height of hydraulic jump. iii. The loss in energy head. iv. The losses in power by the jump. V. The type of flow after the jump.
The losses in power by the jump is -15546.1 W.V. Type of flow after the jump: After the hydraulic jump, the type of flow is subcritical flow.
To determine the characteristics of the hydraulic jump, we can use the principles of conservation of mass and energy.
Given the following information:
Flow rate (Q) = 15 m³/s
Width of the floor (b) = 3 m
Upstream depth (h₁) = Im (unknown)
Upstream velocity (V₁) = 5 m/s
i). The downstream depth required to cause a hydraulic jump:
To determine the downstream depth (h₂),
we can use the energy equation:
h₂ = h₁ + (V₁² / (2g)) - (Q² / (2g × b² × h₁²))
Where g is the acceleration due to gravity.
ii). Height of the hydraulic jump:
The height of the hydraulic jump (H) can be calculated using the specific energy equation:
[tex]H=(V_1^2 / (2g)) * ((1 + (Q / (b * V_1 * h_1)))^{(2/3)} - 1)[/tex]
iii). The loss in energy head:
The loss in energy head (ΔE) can be calculated by subtracting the specific energy at the hydraulic jump (E₂) from the specific energy at the upstream condition (E₁):
ΔE = E₁ - E₂
ΔE = (V₁² / (2g)) - (V₂² / (2g)) + g × (h₁ - h₂)
iv). The losses in power by the jump:
The power loss (Ploss) can be calculated by multiplying the loss in energy head (ΔE) by the flow rate (Q):
Ploss = ΔE × Q
The losses in power by the jump is -15546.1 W.V.
v). The type of flow after the jump:
The type of flow after the jump can be determined based on the Froude number (Fr₂) calculated using the downstream depth (h₂) and downstream velocity (V₂):
Fr₂ = V₂ / √(g × h₂)
If Fr₂ < 1, the flow is subcritical (tranquil flow).
If Fr₂ > 1, the flow is supercritical (rapid flow).
Type of flow after the jump: After the hydraulic jump, the type of flow is subcritical flow.
Therefore, the losses in power by the jump is -15546.1 W.V. Type of flow after the jump: After the hydraulic jump, the type of flow is subcritical flow.
To know more about energy, visit
https://brainly.com/question/1932868
#SPJ11
This experiment will allow us to examine how changes in volume affect the pressure of a gas in a container. 1) Circle the correct response: a) To increase the volume of a gas in a container we must [increase; decrease] the surface area of the container. b) There are [the same; fewer] number of molecules in the container when the volume of the container is changed. c) Pressure in force/area. As the volume of the gas increases then the area [increases; decreases] and so the pressure of the gas [increases; decreasesl.
To increase the volume of a gas in a container we must decrease the surface area of the container. There are the same number of molecules in the container when the volume of the container is changed.
Pressure in force/area. As the volume of the gas increases then the area decreases and so the pressure of the gas decreases. To increase the volume of a gas in a container we must decrease the surface area of the container. The volume of a gas in a container increases when the surface area of the container decreases. For instance, when the container's lid is opened, the volume of the gas expands and occupies more space. In order to increase the volume of gas, the surface area must decrease. There are the same number of molecules in the container when the volume of the container is changed.
Changing the volume of a container has no effect on the number of gas molecules in it. The total number of gas molecules remains constant when the volume is increased or decreased. Changing the volume of a gas in a container does not change the number of gas molecules inside it. Pressure in force/area. As the volume of the gas increases then the area decreases and so the pressure of the gas decreases. According to Boyle's Law, the pressure of a gas is inversely proportional to its volume when the temperature is constant. If the volume of a gas is increased, the area decreases, and pressure of the gas decreases. Therefore, when the volume of gas is increased, the pressure of gas decreases.
To know more about volume visit:
https://brainly.com/question/28058531
#SPJ11
Answer:
the correct answers are:
a) Increase
b) The same
c) Decreases
Step-by-step explanation:
a) To increase the volume of a gas in a container we must [increase; decrease] the surface area of the container.
Answer: Increase
b) There are [the same; fewer] number of molecules in the container when the volume of the container is changed.
Answer: The same
c) Pressure is force/area. As the volume of the gas increases, then the area [increases; decreases] and so the pressure of the gas [increases; decreases].
Answer: Decreases
to know more about volume and pressure of gas visit:
https://brainly.com/question/15917752
#SPJ11
Find the annual percentage yield (APY) in the following situation. A bank offers an APR of 3.3% compounded monthly. The annual percentage yield is___%.
Calculating this expression will give you the Annual Percentage Yield. The calculation, the APY in this situation is approximately 3.357%.
To find the Annual Percentage Yield (APY) when given the Annual Percentage Rate (APR) compounded monthly, we can use the following formula:
[tex]APY = (1 + (APR / n))^{n - 1[/tex]
Where:
APY is the Annual Percentage Yield
APR is the Annual Percentage Rate
n is the number of compounding periods per year
In this case, the APR is 3.3% and it is compounded monthly,
so n = 12 (since there are 12 months in a year).
Substituting the values into the formula:
[tex]APY = (1 + (0.033 / 12))^{12} - 1[/tex]
Calculating this expression will give you the Annual Percentage Yield.
By performing the calculation, the APY in this situation is approximately 3.357%.
To know more about Annual Percentage Yield visit:
https://brainly.com/question/30774234
#SPJ11
A bank offers an APR of 3.3% compounded monthly. The annual percentage yield is 3.46%.
The annual percentage yield (APY) represents the total amount you will earn on your investment, taking into account compounding. To find the APY when the bank offers an APR of 3.3% compounded monthly, we need to use the following formula:
APY = (1 + (APR / n))^n - 1
where APR is the annual percentage rate and n is the number of compounding periods in a year. In this case, the APR is 3.3% and it is compounded monthly, so n = 12 (since there are 12 months in a year).
Plugging the values into the formula:
APY = (1 + (0.033 / 12))^12 - 1
Calculating the values within the parentheses first:
APY = (1 + 0.00275)^12 - 1
Evaluating the exponential term:
APY = (1.00275)^12 - 1
Calculating the result:
APY = 1.0346 - 1
APY = 0.0346
Therefore, the annual percentage yield (APY) in this situation is 3.46%.
In summary, the APY when a bank offers an APR of 3.3% compounded monthly is 3.46%.
Learn more about percentage
https://brainly.com/question/32197511
#SPJ11
A pumping test was made in pervious gravels and sands with hydraulic conductivity of 230 m/day. The original groundwater table coincides with the ground surface. The diameter of the pumping well is 55-cm and observation wells are installed 6.15-m away and another 10.20-m away from the pumping well. It was observed that the radius of influence is 150-m away. If the discharge is 3.76 m3/min and maximum drawdown is 4.5-m, determine the following: provide readable solution
a. Thickness of the aquifer, in m.
b. Transmissivity, in m2/s.
c. Ground water level in the observation well 1 measured from the ground surface, in m.
d. Ground water level in the observation well 2 measured from the ground surface, in m.
a. The thickness of the aquifer is 135.9 m.
b. The transmissivity is 263.6 m²/s.
c. The groundwater level in observation well 1 measured from the ground surface is approximately 0.273 m.
d. The groundwater level in observation well 2 measured from the ground surface is approximately 0.243 m.
How to calculate thickness of aquiferUse the following formulae to solve the problems
S = (T b) / (4πT)
[tex]Q = (4\pi T h) / (ln(r_2/r_1) - \Delta S)[/tex]
s = Δh
Definition of terms:
S = storage coefficient (-)
T = transmissivity (m²/s)
b = aquifer thickness (m)
Q = discharge rate (m³/s)
h = drawdown (m)
r₁ = distance from pumping well to observation well 1 (m)
r₂ = distance from pumping well to observation well 2 (m)
ΔS = difference in drawdown between observation wells (m)
Δh = drop in water level in observation well (m)
To calculate thickness of the aquifer
radius of influence, r, is 150 m. use the equation for the radius of influence to solve for b:
r = 0.183 √(T t / S)
150 = 0.183 √(230 b / S)
Solving for b, we get:
b = ((150 / 0.183)² S) / 230
b ≈ 135.9 m
The thickness of the aquifer is 135.9 m.
For Transmissivity
[tex]Q = (4\pi T h) / (ln(r_2/r_1) - \Delta S)\\T = (Q (ln(r_2/r_1) - \Delta S)) / (4\pi h)\\T = (3.76/60) * (ln(10.20/6.15) - 4.5) / (4\pi * 6.15)[/tex]
T ≈ 263.6 m²/s
The transmissivity is approximately 263.6 m²/s.
For ground water level in observation well 1, Δh₁:
s = Δh
[tex]\Delta h_1 = s_1 = h (r_1^2 / 4Tt)\\\Delta h_1 = 4.5 (6.15^2 / (4 * 263.6 * 135.9))\\\Delta h_1 \approx 0.273 m[/tex]
Thus, the groundwater level in observation well 1 measured from the ground surface is approximately 0.273 m.
For ground water level in observation well 2, Δh2:
s = Δh
[tex]\Delta h_2 = s_2 = h (r_2^2 / 4Tt)\\\Delta h_2 = 4.5 (10.20^2 / (4 * 263.6 * 135.9))\\\Delta h_2 \approx 0.243 m[/tex]
Therefore, the groundwater level in observation well 2 measured from the ground surface is approximately 0.243 m.
Learn more on transmissivity on https://brainly.com/question/30652598
#SPJ4
7. What is different about reading volumes on burets from rending volumes on graduated cylinders? 8. What is a "banging drop"? 9. Why should you rinse pipets and burets with the solution they will contain? 10. What equation should you use to calculate the molarity of acetic acid from the titration data?
7. The main difference between reading volumes on burets and reading volumes on graduated cylinders is the precision of the measurements.
8. A "banging drop" is a term used in titration experiments. It refers to a sudden, sharp change in the color of the solution being titrated.
9. It is important to rinse pipets and burets with the solution they will contain in order to ensure accurate measurements and prevent contamination.
10. The equation used to calculate the molarity of acetic acid from titration data depends on the reaction being carried out and the stoichiometry of the reaction.
7.Burets are typically used in titrations, where the volume needs to be measured very accurately. Burets have a smaller scale and a finer graduation, allowing for more precise measurements compared to graduated cylinders.
8.This change occurs when the titrant is added in excess and reacts with the indicator, causing a noticeable change in the color of the solution.
9. Rinsing removes any residual substances or impurities that may be present in the pipet or buret. By rinsing with the solution to be used, any remaining substances are replaced with the solution, ensuring that only the desired solution is present for accurate measurements.
10. Generally, the equation will involve the balanced chemical equation for the reaction and the volume of the titrant used. For example, if acetic acid is being titrated with a strong base like sodium hydroxide, the equation would be:
Molarity of acetic acid (CH3COOH) = (Molarity of NaOH) x (Volume of NaOH) / (Volume of acetic acid)
The exact equation may vary depending on the specific titration and the reaction being studied.
Learn more about titration at
https://brainly.com/question/29665786
#SPJ11
The slope of the bending moment diagram at any point is ... the shear force intensity at that point._____ the load intensity at that point. _____always different than zero.
The slope of the bending moment diagram at any point is equal to the shear force intensity at that point. It is not equal to the load intensity at that point. The shear force intensity at that point is always different than zero.
The slope of the bending moment diagram at any point is equal to the shear force intensity at that point. It is one of the fundamental relationships of shear force and bending moment that is significant in the study of beams. This relationship is important to comprehend because the slopes of these diagrams offer critical information on the shape and magnitude of internal forces and moments that act within the beam.
The shear force intensity at that point is always different than zero. This is because shear force is the internal force that arises to balance out the external loads that act on the beam. This implies that at any point of the beam, the shear force intensity is always present to support the load intensity at that point.
To know more about shear force intensity visit:
https://brainly.com/question/30763282
#SPJ11
What is the value of a in the equation 3a+ b=54 when B=9?
The answer is:
a = 15
Work/explanation:
Plug in 9 for B :
[tex]\sf{3a + b =54}[/tex]
[tex]\sf{3a + 9 =54}[/tex]
Subtract 9 from each side:
[tex]\sf{3a=45}[/tex]
Divide each side by 3:
[tex]\sf{a=15}[/tex]
Therefore, the answer is a = 15.QUESTION 13 A 5 kg soil sample contains 30 mg of trichloroethylene (TCE). What is the TCE concentration in ppmm? 0.6 ppmm 6 ppmm 60 ppmm 600 ppmm
The TCE concentration in the soil sample is 6 ppmm.
[tex]ppmm = (mg of TCE)/(kg of soil) * 10^6[/tex]
In this case, we have:
mg of TCE = 30 mg
kg of soil = 5 kg
Substituting these values into the formula, we get:
[tex]ppmm = (30 mg)/(5 kg) * 10^6 = 6 ppmm[/tex]
Therefore, the TCE concentration in the soil sample is 6 ppmm.
Trichloroethylene (TCE) is a colorless, non-flammable liquid that is used in a variety of industrial processes, including metal degreasing, dry cleaning, and paint stripping. It is also a common groundwater contaminant, as it can easily leach from soil and into water.
The safe level of TCE concentration in drinking water varies depending on the source of the water. The Environmental Protection Agency (EPA) has set a maximum contaminant level (MCL) of 5 micrograms per liter (µg/L) for TCE in drinking water. This means that the average concentration of TCE in drinking water should not exceed 5 µg/L.
However, some people may be more sensitive to TCE than others. For example, pregnant women and young children may be at an increased risk for health problems from exposure to TCE. If you are concerned about your exposure to TCE, you should talk to your doctor.
Learn more about concentration with the given link,
https://brainly.com/question/17206790
#SPJ11
A vertical curve below has a lower point (A) which exists at station (53+50) with elevation (1271.2 m). the back grade of (-4%) meet the forward grade of (+3.8%) at (PVI) station (52+00) with elevation (1261.5 m). determine the length of the curve with the stations of (PVC) and (PVT)?
A vertical curve is a road with changing elevation over a distance. A crest curve has an increasing slope, while a sag curve has a decreasing slope. Calculating the elevation of PVC and PVT stations using the formula, we get a length of 275.70 m. The equations for PVC and PVT give us the desired length.
A vertical curve is a curve on a road where the elevation is changing over a certain distance. A curve with an increasing slope is referred to as a crest curve, while a curve with a decreasing slope is referred to as a sag curve. The problem has given us the following details:
Lets' calculate the Elevation of PVC:
PVC station lies before the PVI, and it is a point of intersection between the back grade and the vertical curve. Let's assume that the length of the vertical curve is (L).The elevation of PVC can be calculated as follows:
Elevation of PVC = Elevation of Lower Point + Vertical Distance of PVC from Lower Point
Elevation of PVC = 1271.2 m - [(-4/100)(53.5 m - 52.0 m)]
Elevation of PVC = 1271.2 m - (-0.54 m)
Elevation of PVC = 1271.74 m
Let's calculate the Elevation of PVT:PVT station lies after the PVI, and it is a point of intersection between the forward grade and the vertical curve. The elevation of PVT can be calculated as follows:
Elevation of PVT = Elevation of PVI + Vertical Distance of PVT from PVI
Here, the vertical distance between the PVI and PVT is unknown, but it can be calculated using the following formula: Vertical Distance between PVI and
PVT = L/2 * [(BG + FG)/(BG * FG)]
Vertical Distance between PVI and
PVT = L/2 * [(-4 + 3.8)/(-4 * 3.8)]
Vertical Distance between PVI and
PVT = L/2 * [-0.0658]
Vertical Distance between PVI and PVT = -0.0329 * L
Substitute the above value of the vertical distance between PVI and PVT in the formula for calculating the elevation of PVT:
Elevation of PVT = 1261.5 m + [-0.0329 * L]
Let's equate the elevations of PVC and PVT:
Elevation of PVC = Elevation of PVT1271.74 m
= 1261.5 m + [-0.0329 * L]
Solve for L to determine the length of the vertical curve:L = 275.70 m
Therefore, the length of the curve with the stations of (PVC) and (PVT) is 275.70 m.
To know more about Elevation of PVC Visit:
https://brainly.com/question/32891538
#SPJ11
Type the correct answer in each box. Use numerals instead of words. If necessary, use / for the fraction bar(s).
The slope of the line shown in the graph is _____
and the y-intercept of the line is _____ .
The mix proportion (without adjustments) by weight (SSD) is for concrete mix designed according to ACI 211. The fresh concrete density was 2370 kg/m3 and w/c=0.4. The content of fine aggregate (SSD) is equal to 600 kg per cubic meter and entrapped air is 2%. The specific gravity for .coarse and fine aggregates is 2.67 and 2.65 respectively 1:2.89 3.86 O 1: 1.27:2.35 O 1:1.85: 2.73 O 1: 2.31: 3.37 O
Answer: the mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 is not directly provided. It requires additional information such as the weight of water and the desired cement content to determine the mix proportion accurately.
The mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 can be determined using the given information.
Step 1: Calculate the absolute volume of fine aggregate:
Absolute volume of fine aggregate = (content of fine aggregate in kg per cubic meter) / (density of fine aggregate in kg/m3)
Absolute volume of fine aggregate = 600 kg/m3 / 2370 kg/m3
Absolute volume of fine aggregate = 0.253
Step 2: Calculate the absolute volume of entrapped air:
Absolute volume of entrapped air = (volume of entrapped air in %) / 100
Absolute volume of entrapped air = 2% / 100
Absolute volume of entrapped air = 0.02
Step 3: Calculate the absolute volume of coarse aggregate:
Absolute volume of coarse aggregate = 1 - (w/c + absolute volume of fine aggregate + absolute volume of entrapped air)
Absolute volume of coarse aggregate = 1 - (0.4 + 0.253 + 0.02)
Absolute volume of coarse aggregate = 0.327
Step 4: Calculate the weight of fine aggregate:
Weight of fine aggregate = (absolute volume of fine aggregate) * (density of fine aggregate)
Weight of fine aggregate = 0.253 * 2370 kg/m3
Weight of fine aggregate = 600 kg
Step 5: Calculate the weight of coarse aggregate:
Weight of coarse aggregate = (absolute volume of coarse aggregate) * (density of coarse aggregate)
Weight of coarse aggregate = 0.327 * (density of coarse aggregate)
Weight of coarse aggregate = 0.327 * (2.67 * 1000) kg/m3
Weight of coarse aggregate = 878.7 kg
Step 6: Calculate the weight of water:
Weight of water = (w/c) * (weight of cement)
Weight of water = 0.4 * (weight of cement)
Step 7: Calculate the weight of cement:
Weight of cement = (weight of water) / (w/c)
Weight of cement = (weight of water) / 0.4
Based on the given information, the mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 is not directly provided. It requires additional information such as the weight of water and the desired cement content to determine the mix proportion accurately.
To learn more about volume of coarse aggregate:
https://brainly.com/question/33592443
#SPJ11
12. Lucy has a bag of Skittles with 3 cherry, 5 lime, 4 grape, and 8 orange
Skittles remaining. She chooses a Skittle, eats it, and then chooses
another. What is the probability she get cherry and then lime?
(a) Complete the table of values for y = 5/x
0.5
1
X
y
6
2
3
3
4
1.5
5
6
1
To complete the table for y = 5/x, we substitute different x-values and calculate the corresponding y-values. The table includes x-values of 0.5, 1, 2, 3, 4, 5, and 6, with their respective y-values of 10, 5, 2.5, 1.6667, 1.25, 1, and 0.8333 (approximated to 4 decimal places).
We are given the equation y = 5/x and are asked to complete the table of values for this equation.
To do this, we need to substitute different values of x into the equation and calculate the corresponding values of y.
Let's start with the first entry in the table:
For x = 0.5, we substitute this value into the equation:
y = 5 / 0.5 = 10
So, when x is 0.5, y is 10.
Moving on to the next entry:
For x = 1, we substitute this value into the equation:
y = 5 / 1 = 5
So, when x is 1, y is 5.
We continue this process for the remaining values of x:
For x = 2, y = 5 / 2 = 2.5
For x = 3, y = 5 / 3 ≈ 1.6667 (approximated to 4 decimal places)
For x = 4, y = 5 / 4 = 1.25
For x = 5, y = 5 / 5 = 1
For x = 6, y = 5 / 6 ≈ 0.8333 (approximated to 4 decimal places)
By substituting each x-value into the equation, we have calculated the corresponding y-values for the given equation.
For more such information on: table
https://brainly.com/question/12151322
#SPJ8
Tritium, a radioactive isotope of hydrogen, has a half-life of approximately 12 yr. (a) What is its decay rate constant?
(b) What is the ratio of Tritium concentration after 25 years to its initial concentration?
Tritium has a half-life of 12 years and a decay rate constant of 0.0578 yr^(-1). Its concentration ratio after 25 years is 23.03%, calculated using the formula A/A₀.
Tritium is a radioactive isotope of hydrogen that has a half-life of around 12 years. A half-life is the length of time it takes for half of a radioactive substance to decay.The following is the information that we have:Tritium's half-life, t₁/₂ = 12 yr
(a) Decay rate constant, λ = ?The formula for the rate of decay of a radioactive substance is:
A = A₀e^(-λt)
Where, A₀ is the initial concentration of the substance and A is the concentration after time t.
Using this formula, we can find the decay rate constant,
λ.λ = ln(A₀/A) / tλ = ln(2) / t₁/₂λ
= ln(2) / 12λ = 0.0578 yr^(-1)
Therefore, the decay rate constant of Tritium is 0.0578 yr^(-1).
(b) Tritium's ratio of concentration after 25 years to its initial concentration, A/A₀ = ?We can use the formula to find the ratio of concentration after 25 years to its initial concentration.
λ = ln(A₀/A) / tA₀/A
= e^(λt)A/A₀ = e^(0.0578 * 25)A/A₀ = 0.2303 or 23.03%
Therefore, the ratio of Tritium concentration after 25 years to its initial concentration is 0.2303 or 23.03%.
To know more about radioactive isotope Visit:
https://brainly.com/question/28039996
#SPJ11
1.A vegetable oil extractor costing Rs. 1,50,000 with annual operating cost of Rs. 45,000 and an estimated life of 12 years has a salvage value of Rs. 18,000. Alternate oil extractor equipment costs Rs. 54,000 with a life of 6 years has Rs. 6000 junk value and the operating costs are Rs. 75,000 annually. What is the rate of returns for the extra investment if the extractor is replaced.
To calculate the rate of return for the extra investment, we need more information such as the cash inflows from the extractor and the alternate equipment. Without this information, it is not possible to determine the rate of return.
To calculate the rate of return, we would need the cash inflows generated by both the existing extractor and the alternate equipment. Cash inflows could come from the sale of vegetable oil or any other revenue generated by using the equipment. Without these values, we cannot calculate the rate of return.
Additionally, the rate of return calculation would also require the initial investment, salvage value, and the time period considered. In this case, the initial cost and salvage value for the existing extractor are provided, but we still need the initial cost and salvage value for the alternate equipment.
Without the necessary data, it is not possible to determine the rate of return for the extra investment in the extractor replacement.
The calculation of the rate of return for the extra investment in the extractor replacement cannot be determined without knowing the cash inflows from both the existing extractor and the alternate equipment.
To k ow more about rate visit:
https://brainly.com/question/119866
#SPJ11
A simple T-beam with bf=600mm h=500mm hf=100mm, bw=300mm with a span of 3m,
reinforced by 5-20mm diameter rebar for tension, 2-20mm diameter rebar for
compression is to carry a uniform dead load of 20kN/m and uniform live load of
10kN/m. Assuming fe'=21Mpa, fy=415Mpa, d'=60mm, cc=40m and stirrups= 10mm,
Calculate the cracking moment:
The cracking moment of the T-beam is approximately 1.21 x 10^6 Nmm.
To calculate the cracking moment of a T-beam, we need to consider the dimensions and reinforcement of the beam, as well as the loads it will be subjected to.
Given:
- bf = 600mm (width of the flange)
- h = 500mm (overall height of the beam)
- hf = 100mm (height of the flange)
- bw = 300mm (width of the web)
- Span = 3m
- Reinforcement: 5-20mm diameter rebar for tension, 2-20mm diameter rebar for compression
- Dead load = 20kN/m
- Live load = 10kN/m
- fe' = 21MPa (characteristic strength of concrete)
- fy = 415MPa (yield strength of reinforcement)
- d' = 60mm (effective depth)
- cc = 40mm (clear cover)
- Stirrups = 10mm
Step 1: Calculate the area of the reinforcement for tension and compression.
- Area of reinforcement for tension: As = (π/4) x (5mm)^2 x number of bars
- Area of reinforcement for compression: Ac = (π/4) x (2mm)^2 x number of bars
Step 2: Calculate the effective depth (d) and the lever arm (a).
- Effective depth (d): d = h - cc - (bar diameter/2) = 500mm - 40mm - (20mm/2) = 460mm
- Lever arm (a): a = d - (hf/2) = 460mm - (100mm/2) = 410mm
Step 3: Calculate the moment of inertia (I).
- Moment of inertia (I): I = (bw x hf^3)/12 + (bf x (h - hf)^3)/12
Step 4: Calculate the cracking moment (Mcr).
- Cracking moment (Mcr): Mcr = (fe' x I)/(d - a)
Let's plug in the given values and calculate the cracking moment:
Step 1:
- Area of reinforcement for tension: As = (π/4) x (20mm)^2 x 5 = 1570mm^2
- Area of reinforcement for compression: Ac = (π/4) x (20mm)^2 x 2 = 628mm^2
Step 2:
- Effective depth (d): d = 500mm - 40mm - (20mm/2) = 460mm
- Lever arm (a): a = 460mm - (100mm/2) = 410mm
Step 3:
- Moment of inertia (I): I = (300mm x 100mm^3)/12 + (600mm x (500mm - 100mm)^3)/12
= 8333333.33mm^4
Step 4:
- Cracking moment (Mcr): Mcr = (21MPa x 8333333.33mm^4)/(460mm - 410mm)
= 1.21 x 10^6 Nmm
Therefore, the cracking moment of the T-beam is approximately 1.21 x 10^6 Nmm.
To learn more about beam
https://brainly.com/question/31681764
#SPJ11
The center of mass of a composite body: Is calculated as the sum of the product of the mass of each figure involved in the composite body divided by the total mass of the object. Requires integration for its calculation in all cases. Is calculated as the sum of the mass of each figure involved in the composite body multiplied by the distance of the centroid of that figure from a coordinate axis established on the object. Is the same as the center of gravity of the composite object.
The correct statement regarding the center of mass of a composite body is that it is calculated as the sum of the product of the mass of each figure involved divided by the total mass of the object.
The centre of mass of a composite body is determined by multiplying the total mass of the object by the sum of the products of the masses of all the figures that make up the composite body. Since it may be calculated by straightforward addition and division, this method does not always require integration.
The centre of mass is determined by adding the masses of all the individual components of the composite body and dividing the result by the distance between each component's centroid and a coordinate axis placed on the item.
The center of mass and the center of gravity of a composite object are not necessarily the same. The center of gravity specifically refers to the point where the entire weight of the object can be considered to act, while the center of mass refers to the average position of the mass distribution. In a uniform gravitational field, the center of gravity coincides with the center of mass, but in other cases, they may differ.
To know more about mass:
https://brainly.com/question/941818
#SPJ4
A company wants to retrofit their plant with a baghouse, meaning that space is limited. Particle control efficiency of 95% must be achieved. Would you recommend a shaker, reverse air, or pulse jet baghouse?
The recommended baghouse type that can be used to retrofit a plant limited in space and needs to achieve a particle control efficiency of 95% is a pulse jet baghouse.
In order to recommend a baghouse type to retrofit a plant that is limited in space and needs to achieve particle control efficiency of 95%, let us first look at the baghouse options available and their efficiency. A baghouse is an air pollution control device that uses fabric filter tubes to remove particulate matter from the air and gases. There are three types of baghouses that can be used: Shaker Baghouse, Reverse Air Baghouse and Pulse Jet Baghouse.
Shaker baghouses are generally smaller than other baghouse designs and have low initial capital costs. The downside of this type of baghouse is that it has the lowest efficiency compared to reverse air and pulse jet baghouses. This means that it may not be able to achieve the required 95% particle control efficiency.
Reverse Air Baghouse is more efficient than the shaker baghouse. The reverse air baghouse features a cleaning system that uses an adjustable fan to pull air through the baghouse, effectively dislodging the collected dust particles. The collected particles are then discharged to a hopper for storage or disposal. This baghouse type can achieve a particle control efficiency of up to 99%.
However, in our case, it is recommended to use a Pulse Jet Baghouse. This type of baghouse is the most efficient and provides the highest level of particle control efficiency of up to 99.9%. Pulse jet baghouses use high-pressure compressed air to pulse the bags, causing the dust to fall into the hopper below. Pulse jet baghouses have lower operating costs than other types of baghouses due to their smaller size, less frequent cleaning cycles, and use of less compressed air.
Therefore, considering the limitation of space and the required particle control efficiency of 95%, pulse jet baghouse is the best recommendation.
Conclusion: The recommended baghouse type that can be used to retrofit a plant limited in space and needs to achieve a particle control efficiency of 95% is a pulse jet baghouse.
To know more about efficiency visit
https://brainly.com/question/31458903
#SPJ11
3. Design a system of wells to lower the water table at a construction site for a rectangular excavation area with dimensions of 100 m and 500 m. The hydraulic conductivity is 5 m/d, and the initial saturated thickness is 30 m. The water table must be lowered 7 m everywhere in the excavation. Design the system by determining the number, placement, and pumping rate of the wells. The wells must be at least 50 m outside the excavation area. Each well can pump up to 450 m/d. Assume steady state and a radius of influence of 800 m. (Hints: Remember this aquifer is unconfined. Think about where the drawdown will be smallest inside the excavation.)
16 wells are required to lower the water table in the excavation area. The placement of wells will be outside the excavation area, at least 50 m away. The wells should be placed at equal distances around the excavation area. The pumping rate of each well should be around 254 m³/day.
Designing a system of wells to lower the water table at a construction site for a rectangular excavation area with dimensions of 100 m and 500 m needs to determine the number, placement, and pumping rate of wells.
The hydraulic conductivity is 5 m/d, and the initial saturated thickness is 30 m. The water table must be lowered 7 m everywhere in the excavation. The wells must be at least 50 m outside the excavation area. Each well can pump up to 450 m/d. Assume steady state and a radius of influence of 800 m.
To determine the required pumping rate, the formula used is:
Q = 2πKhΔh / ln(r2 / r1)
where: Q = required pumping rate [m³/day]
Kh = hydraulic conductivity [m/day]
Δh = drawdown [m]
r1 = well radius [m]
r2 = radius of influence [m]
Assuming that each well has a radius of 0.5 m, the radius of influence for each well is 800 m. Therefore, the required pumping rate per well is:
Q = 2π(5)(7) / ln(800 / 0.5)
≈ 254 m³/day
Thus, the number of wells required to lower the water table is:
Total required pumping rate = 7,000 m³/day
Number of wells = Total required pumping rate / pumping rate per well
= 7,000 / 450
≈ 16 wells
Therefore, 16 wells are required to lower the water table in the excavation area. The placement of wells will be outside the excavation area, at least 50 m away. The wells should be placed at equal distances around the excavation area. The pumping rate of each well should be around 254 m³/day.
To know more about area visit
https://brainly.com/question/1631786
#SPJ11
Find the following derivatives. Zg and z₁, where z=e 9x+y x=2st, and y = 3s + 2t =9e9x+y əx (Type an expression using x and y as the variables.) əx ds (Type an expression usings and t as the variables.) dz =/e4x+y ду (Type an expression using x and y as the variables.) 3 ds (Type an expression using s and t as the variables.) x at (Type an expression using s and t as the variables.) dy 2 dt (Type an expression using s and t as the variables.) Zs= (Type an expression usings and t as the variables.) Z₁ = (Type an expression using s and t as the variables.)
The following derivatives. z and Z₁, where z = 6x + 3y, x = 6st, and y = 4s + 9t, the value of Zs =0
Here, we have,
To find the derivative of z with respect to s and t, we can use the chain rule.
Let's start by finding ∂z/∂s:
z = 6x + 3y
Substituting x = 6st and y = 4s + 9t:
z = 6(6st) + 3(4s + 9t)
z = 36st + 12s + 27t
Now, differentiating z with respect to s:
∂z/∂s = 36t + 12
Next, let's find ∂z/∂t:
z = 6x + 3y
Substituting x = 6st and y = 4s + 9t:
z = 6(6st) + 3(4s + 9t)
z = 36st + 12s + 27t
Now, differentiating z with respect to t:
∂z/∂t = 36s + 27
So, the derivatives are:
∂z/∂s = 36t + 12
∂z/∂t = 36s + 27
Now, let's find Zs. We have the equation Z = 4s = 0,
which implies that 4s = 0.
To solve for s, we divide both sides by 4:
4s/4 = 0/4
s = 0
Therefore, Zs = 0.
To know more about derivatives refer-
brainly.com/question/27986273
#SPJ4
complete question:
Find the following derivatives. z and Z₁, where z = 6x + 3y, x = 6st, and y = 4s + 9t Zs = (Type an expression using s and t as the variables.) 4=0 (Type an expression using s and t as the variables
Navier Stokes For Blood Clot region - Find out Velocity Profile and Net Momentum loss
Navier Stokes For Blood Clot region - Velocity Profile and Net Momentum loss.
The Navier-Stokes equation is a set of equations in fluid mechanics that represents the conservation of mass, momentum, and energy. It's a complicated set of nonlinear partial differential equations that describe fluid motion in three dimensions. The flow of blood is a complex fluid flow that is affected by numerous factors, including flow velocity, blood vessel wall properties, and fluid viscosity.
To investigate blood flow, the Navier-Stokes equation may be used. The velocity profile and net momentum loss are then determined using the Navier-Stokes equation. The following is the detailed answer for this question:Velocity Profile:Velocity is a vector quantity that represents the rate of motion in a particular direction. Blood flow velocity is a critical indicator of vascular health.
The velocity profile in the Navier-Stokes equation is determined by determining the velocity at various points in a given fluid. This is accomplished by solving a set of differential equations that take into account the fluid's viscosity, density, and other physical properties.Net Momentum Loss:When a fluid flows through a blood vessel, it exerts a force on the vessel walls. This is referred to as a momentum transfer.
The momentum transfer rate, which is the rate at which momentum is transferred to the vessel walls, is determined using the Navier-Stokes equation. The momentum transfer rate is determined by integrating the fluid's momentum flux over the vessel's cross-sectional area. The net momentum loss can be calculated by subtracting the momentum transfer rate from the initial momentum of the fluid.
Learn more about Navier-Stokes equation
brainly.com/question/29181204
#SPJ11
Sorry i am very confused on this pls help
The measure of the angle z of triangle ∆ABD in the same segment with angle C of triangle ∆ABC is equal to 51°
How to evaluate for the angle zWhen two angles are in the same segment, they have the same measure. This means that if you know the measure of one angle in a particular segment, you can determine the measure of any other angle in that segment.
angle z = angle C
angle C = 180° - (55 + 34 + 40)° {sum of interior angles of triangle ABC
angle C = 180° - 129°
angle C = 51°
also;
angle z = 51°
Therefore, the measure of the angle z of triangle ∆ABD in the same segment with angle C of triangle ∆ABC is equal to 51°
Read more about angle here:https://brainly.com/question/24423151
#SPJ1
Engineer A worked for Engineer B. On November 15, 1982 Engineer B notified Engineer A that Engineer B was going to terminate Engineer A because of lack of work. Engineer A thereupon notified clients of Engineer B that Engineer A was planning to start another engineering firm and would appreciate being considered for future work. Meanwhile, Engineer A continued to work for Engineer B for several additional months after the November termination notice. During that period, Engineer B distributed a previously printed brochure listing Engineer A as one of Engineer B's key employees, and continued to use the previously printed brochure with Engineer A's name in it well after Engineer B did in fact terminate Engineer A. Question: 1. Was it ethical for Engineer A to notify clients of Engineer B that Engineer A was planning to start a firm and would appreciate being considered for future work while still in the employ of Engineer B?
It is generally considered unethical for Engineer A to notify clients of Engineer B about their plans to start another engineering firm while still being employed by Engineer B.
Engineer A's actions of notifying clients of Engineer B while still employed can be seen as unethical. Here's a step-by-step explanation:
1. As an employee of Engineer B, Engineer A has a duty of loyalty and confidentiality to their employer. This means that Engineer A should prioritize the interests of Engineer B and not engage in activities that could potentially harm the company.
2. By notifying clients of Engineer B about their plans to start another engineering firm, Engineer A is essentially soliciting business while still being employed by Engineer B. This can be seen as a breach of loyalty and a conflict of interest.
3. Engineer A's actions could potentially harm Engineer B's business by diverting clients and future work opportunities away from Engineer B. This is particularly problematic if Engineer A uses their position at Engineer B to gain an unfair advantage in securing clients for their new firm.
4. It is generally considered ethical for employees to refrain from engaging in activities that could harm their current employer until they have officially left the company. This includes soliciting clients and promoting personal business ventures.
5. Engineer A could have chosen to wait until after their employment with Engineer B ended to inform clients about their new engineering firm. This would have avoided any potential conflicts of interest and upheld their ethical responsibilities as an employee.
In summary, it is generally considered unethical for Engineer A to notify clients of Engineer B about their plans to start another engineering firm while still being employed by Engineer B. Engineer A should have waited until after their employment ended to pursue business opportunities for their new firm.
Learn more at: https://brainly.com/question/14864299
#SPJ11
The population of deer in a state park can be predicted by the expression 106(1. 087)t, where t is the number of years since 2010
The given expression 106(1.087)^t represents the population of deer in a state park. Here's an explanation of the components and their meanings:
106: This is the initial population of deer in the state park, as of the base year (2010).
(1.087)^t: This part represents the growth factor of the deer population over time. The value 1.087 represents the growth rate per year, and t represents the number of years since 2010.
To calculate the predicted population of deer in a given year, you would substitute the corresponding value of t into the expression. For example, if you wanted to predict the population in the year 2023 (13 years since 2010), you would substitute t = 13 into the expression:
Population in 2023 = 106(1.087)^13
By evaluating this expression, you can calculate the predicted population of deer in the state park in the year 2023.
Learn more about population from
https://brainly.com/question/25896797
#SPJ11
You place a 532 mg mole crab (Emerita analoga) in a chamber filled with sand and 470 mL of seawater and seal the chamber. Your oxygen electrode reads 7.36 mg -1 L-¹ at noon and 6.71 mg L-¹ at 2:30 pm. What is the mass-specific metabolic rate of the crab? MO₂ of the crab I Units for MO₂ mg O₂ kg¯¹ hr¯¹
The mass-specific metabolic rate of the crab is calculated by dividing the oxygen consumed by the total mass of the system. The answer is 7.001 mg O₂ kg¯¹ hr¯¹.
Metabolic rate refers to the total energy expenditure per unit time by an organism. Mass-specific metabolic rate of the crab refers to the quantity of oxygen that a crab consumes per unit time. In this question, the metabolic rate of the crab is determined by measuring the oxygen consumed by the crab in a sealed chamber filled with sand and seawater. The oxygen electrode reading is used to quantify the oxygen consumption rate of the crab. The mass of the crab, sand and water are used to determine the total mass of the system.
Mass-specific metabolic rate of the crab refers to the quantity of oxygen that a crab consumes per unit time.
Oxygen consumption rate can be used to quantify the metabolic rate. MO₂ of the crab can be determined as:
Oxygen consumed = 7.36 mg/L - 6.71 mg/L
= 0.65 mg/L (in 2.5 hours)
At a temperature of 20°C, the oxygen solubility in seawater is 210 µmol O₂/L.
The volume of the chamber,
V = 470 mL
= 0.47 L
Mass of water = volume of water x density of water
= 0.47 L x 1.02 g/mL
= 0.4794 g
Mass of sand = 1500 g – 479.4 g
= 1020.6 g
Mass of the crab,
M = 532 mg
= 0.532 g
Therefore, Total mass, T = M + mass of sand + mass of water
= 0.532 g + 1020.6 g + 0.4794 g
= 1021.61 g
= 1.02161 kg
The mass-specific metabolic rate of the crab can be calculated as:
MO₂ = (Oxygen consumed / T) × (1000/1) × (1/2.5) × (1/3600)
MO₂ = 0.65 mg/L x (1000/1) × (1/2.5) × (1/3600) x (1/1.02161)
= 7.001 mg O₂ kg¯¹ hr¯¹
The mass-specific metabolic rate of the crab is calculated by dividing the oxygen consumed by the total mass of the system. The answer is 7.001 mg O₂ kg¯¹ hr¯¹.
Mass-specific metabolic rate of the crab is the quantity of oxygen that a crab consumes per unit time. The metabolic rate of the crab can be determined by measuring the oxygen consumed by the crab in a sealed chamber filled with sand and seawater. The mass-specific metabolic rate of the crab is calculated by dividing the oxygen consumed by the total mass of the system. The mass-specific metabolic rate of the crab is 7.001 mg O₂ kg¯¹ hr¯¹.
To know more about volume visit:
brainly.com/question/28058531
#SPJ11
two people share some money in the ratio 3:5. one person gets $75, find out two possible values with the amount of money the other person gets
Answer:
$46.88 and $28.13
Step-by-step explanation:
What is a ratio?A ratio has two or more numbers that symbolize relation to each other. Ratios are used to compare numbers, and you can compare them using division.
To solve a part-part ratio problem, we need to follow these steps:
Find the total number of parts in the ratio by adding the ratio parts together.Divide the given amount by the total number of parts to find the value of one part.Multiply the value of one part by the ratio part that you want to find.If two people share some money in the ratio 3:5 and one person gets $75, you can find out two possible values with the amount of money the other person gets by doing this:
The total number of parts in the ratio is:
3 + 5 = 8The value of one part is:
$75 ÷ 8 = $9.375The amount of money the other person gets is either:
5 × $9.375 = $46.88 (rounded to 2 decimal places)Or:
3 × $9.375 = $28.13 (rounded to 2 decimal places)Therefore the two possible values are $46.88 and $28.13.