Define the following
a. Length:
b. Density:
c.Mass:
d. Volume:
e Standard:

In a year, the earth revolves around the sun once in a circular motion. Therefore, the earth will orbit the sun at a 2.95 m/s speed.

Planets in our solar system did not appear out of thin air. Neither did the sun. They were all a part of a large cloud of gas and dust. Gravity accumulated a lot of material in the center to form the sun. As it spun around the forming sun, the extra matter clashed and gathered together. Some would be capable of attracting more gas and dust, eventually forming planets, because to their powerful gravitational forces.

The answer to the query is

v = 2πR / T

2R equals 6.28 * 9.3 * 107 miles.

T = 24 * 3600 * 365 = 3.15 × 10⁷ sec

v = 9.3 / 3.15 = 2.95 m/s.

Hence, the earth's speed of the earth around the sun will be 2.95 m/s.

To know more about earth on

https://brainly.com/question/27722273

Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve more subjective measurements.

Static flexibility tests are more common in comparison to dynamic tests because static flexibility tests are easier to replicate. It is difficult to standardize motion-based tests such as dynamic flexibility tests between various subjects, while static flexibility tests are simple and easy to standardize it is because the metrics are fixed and not open to interpretation.

Since, dynamic flexibility tests are hard to perform because they measure the amount of stress on a muscle that is in motion. And it is difficult to assess this among multiple people and to get an accurate picture. That is why these tests are not used as often as static flexibility tests.

"

Complete question

Why are dynamic flexibility tests not used as often as static flexibility tests?

"

You can learn more about dynamic flexibility tests at

https://brainly.com/question/15720248

#SPJ4

Answer:

v = 38.9 m/s

Explanation:

v = 38.5 m/s

Explanation:

P1 = P2 (conservation law of linear momentum)

(1575 kg)(20 m/s) + (45 m/s)(0) = (1575 kg)(18.9 m/s) + 45v

Solving for v

v = 38.5 m/s

Answer:Now this question can go ways

Explanation:

1: YES= Because they have super advanced technology and the aliens could fly to earth steal our resources and then experiment on the dinosaurs.

2:NO they did not have enough tech yet to support that much length and they just never look or find earth

ME PERSONALLY I WOULD CHOOSE 1 but, up to you

Jessica's linear speed is faster.

We must first define linear speed in order to respond to the query.

This is the tangential speed of an item moving in a circle. Given by the formula v = r,

r is the object's distance from the circle's center, and is its angular speed.

Given that Julie, Jessica's sister, is riding an inner horse that is placed 6.0 meters from the center of the merry-go-round and Jessica is riding an outside horse that is 8.0 meters away from the center of the ride. The merry-go-round is also rotating at a consistent speed.

Given that v = r and = constant for linear motion,

So, v ∝ r.

Therefore, the girl who was farther away from the merry-go-center round's would move at a faster linear rate.

Since

Julie is at r, and Jessica is at r' = 8.0 m "= 6.0 m.

Since

r' = 8.0 m > r and v r "= 6.0 m,

Jessica's thus has a faster linear speed.

To learn more about Linear Speed from given link

https://brainly.com/question/27391749

#SPJ1

When we do, we make sure to measure our mass in kilograms. We determine that F is equal to 124.26 newtons by entering these numbers into our calculator.

That is the average magnitude of the force applied to the tennis ball.

The equation that Newton was referring to is shown by a serve. You can calculate the total force that was applied by the tennis racket to the ball by multiplying the weight of the racket by the speed at which the player swings their racquet.

An average 120-mph serve slows to 82 mph before the bounce, 65 mph after the bounce, and 55 mph at the opponent's racket, according to tennis instructor and analyst John Yandell.

To learn more about mass here:

https://brainly.com/question/15959704

#SPJ1

Answer:

R = 240 Ω

Explanation:

The resistance created by the light bulb can be calculated by using Ohm's Law:

[tex]V = IR\\\\R =\frac{V}{I}[/tex]

where,

R = Resistance created by the light bulb = ?

V = Voltage across the bulb = 120 volts

I = current passing through the light bulb = 0.5 A

Therefore,

[tex]R = \frac{120\ volts}{0.5\ A}[/tex]

R = 240 Ω

The speed of the truck is 14.3m/s without the crate sliding.

The resistive friction force (Fr) multiplied by the usual or horizontal pressure (N) pushing the things together yields the frictional coefficient (fr), which is a numerical value. The formula fr = Fr/N serves as a representation of it.

Call the mass of the egg crate m. The forces on it are its weight Fg =mg vertically down, the normal force n of the truck bed vertically up, and static friction (fs) directed to oppose relative sliding motion of the crate on the truck bed. The friction force is directed radially inward. It is the only horizontal force on the crate, so it must provide the centripetal acceleration. When the truck has maximum speed, friction fs will have its maximum value with fs=μn.

Newton’s second law in component form becomes

∑Fy=ma(y) giving  n−mg = 0  or  n = mg

∑F(x)=ma(x) giving f(s)= ma(r)

From these equations

μ(s)n ≤ mv²/r and μ(s)mg ≤ mv²/r

The mass divides out. The maximum speed is then

v≤[tex]\sqrt{}[/tex]μrg =[tex]\sqrt{}[/tex]0.600(35.0m)(9.80 m/s²) = v ≤1 4.3m/s.

To know more about static friction visit :

brainly.com/question/13000653

#SPJ4

Using a set of pulleys, Diana hoists a piano weighing 1000 N. To draw in 20.0 m of rope, she applies 250 N of force. The separation is 5m.

given,

Load force = 1000 N

Effort distance = 20.0 m

Effort force=250N

If this were an ideal machine, we could calculate the force Diana applied as follows:

The equation that follows links load force to effort force for a perfect machine;

Effort force × effort distance = Load force × Load distance

When we enter the parameters into the formula, we get;

Load distance = Effort force × effort distance/Load force

                         =250×20/1000

                         = 5 m

Load distance  = 5 m

In mechanics, force is any action that tends to maintain or alter the motion of a body or distort it. The concept of force is commonly explained in terms of Isaac Newton's three laws of motion, as stated in his Principia Mathematica (1687). Newton's first principle states that a body at rest or moving at a uniform rate in a straight line will remain in that state until some force is applied to it. The second law states that when an external force acts on a body, it causes an acceleration (change in velocity) of the body in the direction of the force.

Learn more about force here:

https://brainly.com/question/28875770

#SPJ4

A lengthy string is simple to stretch. The string's two designated spots, A and B, should be at an angle of 90 degrees with the same magnitude, and B should be at an angle of 270 degrees with the same magnitude.

Angle magnitude definition

This is referred to as the amount of rotation that is believed to have been applied to one of the arms' vertex in order to produce a specific position for the other.

It is well known that equal vectors have the same magnitude and direction. When the magnitude and direction of two vectors are the same, they are said to be equal.

|v|=a2+b2 yields the magnitude. Depending on the application, the direction is equal to the angle made with the x-axis or the y-axis.

To learn more about Angle magnitude from given link

https://brainly.com/question/26132809

#SPJ4

Answer:

Option C. Rate of change of velocity

Explanation:

To know the correct answer to the question, it is important we know the definition of power.

Power can be defined as the rate at which work is done. Mathematically, it is expressed as:

Power = work / time

Work and energy has the same unit of measurement i.e joule. Thus, power can also be defined as the rate at which energy is transferred i.e

Power = enery / time

Energy is measured in Joules and time in second. Thus, power can also be defined as amount of joules transfered per second.

Power = Joule / sec

The rate of change of velocity on the other hand is termed acceleration.

Thus, the answer to the question is option C.

Answer:

it gives off 71.0 kJ of heat.

Explanation:

The maximum possible thermal efficiency of the system is d. 67.9%.

By utilizing the physics of heat engines and Second Law of Thermodynamics, we can calculate that the maximum achievable efficiency of a heat engine with a hot reservoir at 515 k and a cold reservoir at 190 k is 67.9%.

This result serves as an upper limit for all practical engines, regardless of the specifics of their design or engineering capabilities.

Making this maximum efficiency is possible through improvements in technology and increased knowledge on thermodynamics and energy production.

To learn more about thermal, click here:

https://brainly.com/question/19666326

#SPJ4

Answer: A.

63.1%

Explanation: edmentum

Stage and film versions of a drama are similar in that the audience must use context clues such as lighting, sound effects, and dialogue to infer the mood of a scene. This requires the audience to pay attention to the details of the performance, as subtle changes in these elements can drastically change the overall tone of the production.

The main difference between a stage and film version of a drama is that a stage production relies heavily on the physicality of the actors and their interactions with one another, while a film production relies heavily on the technical aspects such as camera angles, lighting, and sound design. Additionally, a stage production is performed live in front of an audience, while a film is created in a studio and viewed later by an audience.

Learn more about film versions:

https://brainly.com/question/20500638

#SPJ4

Answer:

All change in their form in relation to amount of heat energy.

Explanation:

The coefficient of viscosity of a liquid can be determined from the motion of a bubble rising or falling through the liquid.

What is viscosity?

Viscosity basically is the measure of a fluid's resistance to flow. It is a measure of a fluid's internal friction, which is caused by the attraction of molecules in the fluid. Viscosity is an important physical property of fluids, as it affects the fluid's flow characteristics.

The equation for the coefficient of viscosity is given by:

2/9 r2 ρg/v.

where,

r = radius of bubble

ρ = density of liquid

g = acceleration due to gravity

v = velocity of bubble

Therefore, to calculate the coefficient of viscosity of a liquid, we need to know the radius of the bubble, the density of the liquid, the acceleration due to gravity, and the velocity of the bubble.

Hence, the coefficient of viscosity of liquid is 2/9 r2 ρg/v.

To know more about viscosity,

https://brainly.com/question/2568610

#SPJ4

In the given case it can be concluded that-  The two basic tenets of the special theory of relativity were that observers moving at constant speeds should be subject to the same physical rules and that the speed of light is constant for all observers.

To know more about theory of relativity here

https://brainly.com/question/23896217

#SPJ4

After solving the problem the person's far point is 25 cm

What is myopic person?

A myopic person is someone who is near sighted and is unable to clearly see objects that are far away. This is caused by the eyeball being too long and the cornea having too much curvature. Light entering the eye is focused in front of the retina rather than directly on it, resulting in blurred vision for distant objects. Myopia is a common eye condition and can usually be corrected with glasses or contact lenses. In more severe cases, laser surgery may be necessary. People with myopia may need to wear their glasses or contact lenses all the time in order to see clearly, but they may be able to take them off when they are close to something they want to see clearly.

The far point is the farthest distance at which a person can see clearly without any corrective lenses.
The formula for calculating far point is 1/f = 1/d + 1/p, where f is the far point, d is the distance from the eye to the lens (1.75 cm in this case), and p is the power of the lens (in diopters) which is -4.00 D.
Plugging the values into the formula yields 1/f = 1/1.75 + 1/-4.00, which simplifies to 1/f = 4.00 - 0.5714. Solving for f gives f = 0.2500, or 25 cm.
Therefore, the person's far point is 25 cm.

To learn more about myopic person

https://brainly.com/question/13257948

#SPJ4

Answer: i think the answer is lift

Explanation:

The magnitude of the force acting on each object is equal to 3.87 x 10-8 N.

The magnitude of the force acting on each object can be calculated using Coulomb's law, which states that the electrostatic force (F) between two point objects with charges (q1 and q2) is equal to the product of the electric constant (k) and the product of the charges divided by the square of the distance (r) between them.

Thus, the formula for calculating the force is F = k(q1q2)/r2. In this case, the charges are both -42 nC, and the distance is 0.46 m. The electric constant is 8.99 x 109 Nm2/C2. Thus, the magnitude of the force acting on each object is equal to 3.87 x 10-8 N

Learn more about forces:

https://brainly.com/question/25239010

#SPJ2

The difference between active flexibility and passive flexibility is that in active flexibility, we rely on our own muscle power to reach the end range, but in passive flexibility, we rely on an external push to reach the end range.

According to the findings of recent studies, active flexibility has a stronger connection to a person's level of sporting performance than passive flexibility does. The ability to build active flexibility is more difficult to achieve than passive flexibility. Active flexibility involves passive flexibility in addition to muscle strength in order to be able to retain and maintain the initial extended position.

To learn more about active flexibility and passive flexibility, click here:

https://brainly.com/question/14345573

#SPJ4

Answer:

True

Explanation:

Because it is:)

A coulomb is a measure of electrical charge and has units of amperes times seconds (A⋅s). A faraday is a constant equal to the magnitude of electric charge per mole of electrons of 96,485.3399 Coulombs (C).

What is magnitude?
Magnitude is a measure of the size or scale of an object or event. It is often used to describe the intensity or severity of a phenomenon, such as earthquakes and hurricanes. It is usually expressed as a number on a logarithmic scale. In astronomy, magnitude is used to measure the brightness of stars and other celestial bodies. On Earth, magnitude is often used to measure the size of earthquakes and other seismic events. Magnitudes are typically expressed as a number on a logarithmic scale, with a greater magnitude indicating a larger size or scale of the event. Magnitudes can also be used to measure the intensity of light, sound, and other forms of energy.

To learn more about magnitude
https://brainly.com/question/30015989

#SPJ4

1) Any mechanical interactions taking place in the process should be frictionless, to make a process perfectly reversible

What is mechanical interactions?

Mechanical interactions are physical forces that are used to affect the behavior of objects and materials. This can include contact forces such as friction, tension, and compression, as well as non-contact forces such as gravity, magnetism, and electric fields

Mechanical interactions can be used to cause objects to move, change shape, or experience a change in energy. These interactions can also be used to create, store, or transfer energy. Mechanical interactions are studied by engineers and scientists in multiple disciplines, and are used in many different applications, including the design of machinery, medical devices, and consumer products.

To learn about more mechanical interactions

https://brainly.com/question/13249269

#SPJ4

Answer:

125 V

Explanation:

Given,

Power ( P ) = 500 W

Current ( I ) = 4 A

To fine : -

Potential difference ( V ) = ?

Formula : -

P = V I

V = P / I

= 500 / 4

V = 125 V

Therefore,

the potential difference across the ends of the heating element is 125 V.

A revolving bar that pivots on a fixed point serves as the lever arm between F and the pivot point.

The pivot is the elbow, while the forearm acts as the lever arm. The biceps muscle exerts the effort and bends the forearm in spite of the forearm's weight and whatever additional weight the hand may be carrying. The weight is farther away from the pivot than the effort.

The lever is a rotating bar that pivots on a fulcrum affixed to a fixed point. By applying forces at different angles in reference to the pivot or fulcrum, the lever generates motion. When the lever spins around the fulcrum, points farthest from it move faster than ones nearer to it.

The lever is a rotating bar that pivots on a fulcrum affixed to a fixed point. By applying forces at different angles in reference to the pivot or fulcrum, the lever arm generates motion. When the lever spins around the fulcrum, points farthest from it move faster than ones nearer to it.

For such more question on lever arm .

https://brainly.com/question/11661286

#SPJ4

Option A is the correct Answer. The effect of a stress raiser is more significant for Ductile materials.

Ductility is the ability of a material to be drawn or plastically deformed without fracture. The ductility of steels varies depending on the types and levels of alloying elements present.

Examples: aluminum, copper, and magnesium alloys.

Uses of  Ductile materials:

To know more about Ductile materials:

https://brainly.com/question/828860

#SPJ4

Answer:

F=MA

A=F/M

A=9000/30000

A=0.3

The magnitude of the centripetal acceleration of the car is 0.0034 km/sec².

Centripetal acceleration is the acceleration of an object moving in a circular path. It is directed towards the center of the circle and is responsible for the change in direction of the object's velocity.

The magnitude of the centripetal acceleration of an object moving in a circle is given by the formula:

a = v² / r

where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circle.

Given that the car goes once around the track in 320 s, we can calculate its velocity by using the formula:

v = d / t

where d is the distance traveled and t is the time.

d = 2pir = 2pi3.0 km = 18.849 km

t = 320 sec

so the velocity of the car is v = 18.849 km / 320 sec = 0.059 km/sec.

We can now use the formula to find the centripetal acceleration of the car

a = v² / r = (0.059 km/sec)²/ 3.0 km = 0.0034 km/sec²

Hence, the magnitude of the centripetal acceleration of the car is 0.0034 km/sec².

To learn more about centripetal acceleration from the given link:

https://brainly.com/question/14465119

#SPJ4